In the face of new diseases, medicine needs to reinvent itself in order to contain and control epidemics, such as the one we have recently faced, COVID-19, a disease with a wide spectrum of clinical severity. A new mo...In the face of new diseases, medicine needs to reinvent itself in order to contain and control epidemics, such as the one we have recently faced, COVID-19, a disease with a wide spectrum of clinical severity. A new moment has been established, since the application of well-known, effective and safe medications for other diseases, has shown high success rates in the treatment of COVID-19. Thereunto, studies with early intervention are needed, which can change the unfavorable outcome of patients. In this article, we report the successful experience using an oral strategy during the collapse of Belem (Para, Brazil) Health System. Two hundred and ten patients were diagnosed with respiratory failure due to COVID-19, with no option of hospital treatment due to lack of beds and resources. These patients were then started on therapeutic regimen consisting of 40 mg prednisolone, 40 mg enoxaparin and macrolides (500 mg clarithromycin, 500 mg axetylcefuroxime) associated and followed in outpatient facilities. Two hundred and eight patients had an excellent therapeutic response and there were only two fatalities. These results push research boundaries, valuing outpatient treatment with early use of prednisolone in the initial pulmonary phase, preventing severe COVID-19 pneumonitis. Adoption of the proposed treatment intends to reduce the need for hospitalization, as well as lethality, with social robust benefits and incalculable economic savings since involves the use of accessible, safe and not expensive medications.展开更多
In-situ tensile tests were conducted on a chemically corroded third-generation single-crystal superalloy DD9 at 980 and 1100℃.The phase transformation in the surface areas during the tensile process was analyzed usin...In-situ tensile tests were conducted on a chemically corroded third-generation single-crystal superalloy DD9 at 980 and 1100℃.The phase transformation in the surface areas during the tensile process was analyzed using field emission scanning electron microscope,energy dispersive X-ray spectroscope,electron probe X-ray microanalysis,and transmission electron microscope.The phase transformation mechanism on the surface and the influence mechanism were studied through observation and dynamic calculation.During tensile tests at elevated temperatures,chemical corrosion promotes the precipitation of topologically close-packed(tcp)μphase andσphase on the alloy surface.Both the precipitation amount and size of these two phases on the surface at 1100℃are greater than those at 980℃.The precipitation of tcp phase on the alloy surface results in the formation of an influence layer on the surface area,and the distribution characteristics of alloying elements are significantly different from those of the substrate.The depth of the influence layer at 1100℃is greater than that at 980℃.The precipitation of tcp phase prompts the phase transition fromγphase toγ′phase around the tcp phase.展开更多
[Background]High harmonic cavities are widely used in electron storage rings to lengthen thebunch,lower the bunch peak current,thereby reducing the IBS effect,enhancing the Touschek lifetime,as well asproviding Landau...[Background]High harmonic cavities are widely used in electron storage rings to lengthen thebunch,lower the bunch peak current,thereby reducing the IBS effect,enhancing the Touschek lifetime,as well asproviding Landau damping,which is particularly important for storage rings operating with ultra-low emittance or atlow beam energy.[Purpose]To further increase the bunch length without additional hardware costs,the phasemodulation in a dual-RF system is considered.[Methods]In this paper,turn-by-turn simulations incorporating randomsynchrotron radiation excitation are conducted,and a brief analysis is presented to explain the bunch lengtheningmechanism.[Results]Simulation results reveal that the peak current can be further reduced,thereby mitigating IBSeffects and enhancing the Touschek lifetime.Although the energy spread increases,which tends to reduce thebrightness of higher-harmonic radiation from the undulator,the brightness of the fundamental harmonic can,in fact,beimproved.展开更多
A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5w...A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.展开更多
As electronic technology continues to evolve towards miniaturization and integration,the demand for micro-refrigeration technology in microelectronic systems is increasing.Ferroelectric(FE)refrigeration technology bas...As electronic technology continues to evolve towards miniaturization and integration,the demand for micro-refrigeration technology in microelectronic systems is increasing.Ferroelectric(FE)refrigeration technology based on the electrocaloric effect(ECE)has emerged as a highly promising candidate in this field,due to its advantages of high energy efficiency,simple structure,easy miniaturization,low cost,and environmental friendliness.The EC performance of FE materials essentially depends on the phase transition features under the coupled electric and thermal fields,making the E–T phase diagram a core tool for decoding the underlying mechanism of ECE.This paper reviews the development of EC materials,focusing on the comprehensive study of E–T phase diagrams.By correlating the microscopic phase structure of FE materials with the macroscopic physical properties,it clarifies the manipulation mechanism for enhanced ECE performance,providing theoretical support for the targeted design of high-performance EC materials.In the future,the introduction of data-driven methods is expected to enable the high-throughput construction of FE phase diagrams,thereby accelerating the optimization of high-performance EC materials and promoting the practical application of FE refrigeration technology.展开更多
Optical phase-gradient metasurfaces have garnered significant attention for enabling flexible light manipulation,with applications across diverse domains.In this work,we will demonstrate that the metasurfaces with pha...Optical phase-gradient metasurfaces have garnered significant attention for enabling flexible light manipulation,with applications across diverse domains.In this work,we will demonstrate that the metasurfaces with phase gradient modulation can be used to achieve illusion optics,featuring the advantages of simple geometric structure and feasible implementation compared with the well-known transformation optics method.The underlying mechanism is the anomalous diffraction law caused by the phase gradient,which provides a theoretical basis for freely manipulating the propagation path of light.By considering a specific example,we will demonstrate that the phase gradient can transform spatial coordinates in real space into illusion space,thereby converting a plane in real space into a curved surface structure in illusion space to achieve the illusion effect.This approach provides a viable alternative to transformation optics for designing illusion devices.展开更多
In the context of the global energy low-carbon transition,phase change energy storage technology becomes a key technology to solve the problem of intermittent renewable energy.Oriented phase change composites(OCPCMs)r...In the context of the global energy low-carbon transition,phase change energy storage technology becomes a key technology to solve the problem of intermittent renewable energy.Oriented phase change composites(OCPCMs)receive widespread attention in practical energy storage applications due to their unique oriented thermally conductive structure,which achieves significant thermal conductivity enhancement in specific directions while retaining the high energy storage capacity of the phase change components.This review systematically summarizes the overall analysis of OCPCMs from synthesis and preparation to application scenarios in recent years.Herein,we introduce the analysis of the heat transfer mechanism of the materials and explore the advantages of the oriented structure in OCPCMs in the heat transfer behavior from a bionic perspective.We then focus on summarizing and generalizing the methods for preparing OCPCMs,giving suggestions for suitable methods according to different scenarios.Besides,we discuss the application of finite element simulation methods to the monitoring of the thermal management behavior of OCPCMs,and look into the potential future application areas of such materials.Finally,it is hoped that this review will provide guidance for the academic community in developing high-performance OCPCMs.展开更多
Material phase-transition represents a significant phenomenon and mechanism in the context of hypervelocity protection.This study presents a thorough analysis of the phase-transition phenomena induced by shock pressur...Material phase-transition represents a significant phenomenon and mechanism in the context of hypervelocity protection.This study presents a thorough analysis of the phase-transition phenomena induced by shock pressure as the shock wave propagates initially to the rear of the projectile.The shock wave that induces a phase-transition is commonly referred to as a macroscopic phase-transition wave,whereas the interface that separates the distinct phases is referred to as macroscopic phase-boundary.The contact interface between the spherical projectile and the thin plate,characterized by its curved surface,plays a significant role in the nonlinear propagation and evolution of wave systems.The pressure distribution along the central axis of a spherical projectile is derived in accordance with the linear decay law observed for axial pressure.On this basis,a quadratic function is employed to characterize the trend of changes in wave front pressure,thereby facilitating the establishment of a model for wave front pressure distribution.Using the phase-transition pressure criterion for materials,the wave front phase evolution process is derived,and the macroscopic phase-boundary is determined.Based on the geometric propagation model(GPM)and the pressure distribution of the wave front,a phase geometric propagation model(PGPM)is proposed.The phase distribution of a spherical projectile impacting a thin plate is obtained by theoretical methods.The accuracy of the PGPM is subsequently validated through a comparison of its results with those obtained from numerical simulations.展开更多
The dissolvable polysulfides and sluggish Li_2S conversion kinetics are acknowledged as two significant challenges in the application lithium-sulfur(Li-S)batteries.Herein,we introduce a dual-doping strategy to modulat...The dissolvable polysulfides and sluggish Li_2S conversion kinetics are acknowledged as two significant challenges in the application lithium-sulfur(Li-S)batteries.Herein,we introduce a dual-doping strategy to modulate the electronic structure of MoS_(2),thereby obtaining a multifunctional catalyst that serves as an efficient sulfur host.The W/V dual single-atomdoped MoS_(2)grown on carbon nanofibers(CMWVS)demonstrates a strong adsorption ability for lithium polysulfides,suppressing the shuttle effects.Additionally,the doping process also results in the phase transition from 2H-MoS_(2)to 1T-MoS_(2)and generates sufficient edge sulfur atoms,promoting the charge/electron transfer and enriching the reaction sites.All these merits contribute to the superior conversion reaction kinetics,leading to the outstanding Li-S battery performance.When fabricated as cathodes by compositing with sulfur,the CMWVS/S cathode delivers a high capacity of 1481.7 mAh g^(-1)at 0.1 C(1 C=1672 mAh g^(-1))and maintains 816.3 m Ah g^(-1)after 1000 cycles at 1.0 C,indicating outstanding cycling stability.Even under a high sulfur loading of 7.9 mg cm^(-2)and lean electrolyte conditions(E/S ratio of 9.0μL mg^(-1)),the cathode achieves a high areal capacity of 8.2 m Ah cm^(-2),showing great promise for practical Li-S battery applications.This work broadens the scope of doping strategies in transition-metal dichalcogenides by tailoring their electronic structures,providing insightful direction for the rational development of high-efficiency electrocatalysts for advanced Li-S battery applications.展开更多
The volume change behavior of natural gas hydrate-bearing sediment is essential as it influences settlement,strength,and stiffness,which directly affect the stability of hydrate reservoirs during hydrate extraction or...The volume change behavior of natural gas hydrate-bearing sediment is essential as it influences settlement,strength,and stiffness,which directly affect the stability of hydrate reservoirs during hydrate extraction or in response to environmental changes.The volume change is influenced not only by stress but also by the formation and dissociation of hydrates.This study adopted a customized apparatus for one-dimensional compression tests,allowing independent control of gas pressure and effective stress.Tests were conducted on samples with different hydrate saturations along various temperature-gas pressure-effective stress paths,yielding some conclusions related to compressibility and creep.An unusual phenomenon was observed under low-stress conditions:hydrate formation led to shrinkage rather than expansion.Three potential mechanisms behind this occurrence were discussed.As hydrate saturation increases,the yield stress rises while the compression and swelling indexes remain minimally affected.After hydrate dissociation,the compression curve of hydrate-bearing sediment drops to that of hydrate-free sediment.Once hydrate is formed,the compression curve of hydrate-free sediment gradually approaches that of hydrate-bearing sediment during the subsequent loading.Under low-stress conditions,the creep of both hydrate-free and hydrate-bearing sediments is very weak.However,when stress increases,significantly beyond the yield stress,the creep of both sediments increases significantly,with hydrate-bearing sediment exhibiting much greater creep than hydrate-free sediment.展开更多
Surface passivation via two-dimensional(2D)perovskite has emerged as a promising strategy to enhance the performance of perovskite solar cells(PSCs)due to the effective compensation of interfacial states.However,the i...Surface passivation via two-dimensional(2D)perovskite has emerged as a promising strategy to enhance the performance of perovskite solar cells(PSCs)due to the effective compensation of interfacial states.However,the in situ grown 2D perovskite passivation layers typically comprise a mixture of multiple dimensionalities at the interface,where band alignment has only been portrayed qualitatively and empirically.Herein,the interface states for precisely phase-tailored 2D perovskite passivated PSCs are quantitatively investigated.In comparison to traditional passivation molecules,2D perovskite layers based on 4-trifluoromethyl-phenylethylammonium iodide(CF3PEAI)exhibit an increased work function,introducing desirable downward band bending to eliminate the Schottky Barrier.Furthermore,precisely phase-tailored 2D layers could modulate the interface trap density and energetics.The n=1 film delivers optimal performance with a hole extraction efficiency of 95.1%.The optimized n-i-p PSCs in the two-step method significantly improve PCE to 25.40%,along with enhanced photostability and negligible hysteresis.It highlights that tailoring in the composition and phase distribution of the 2D perovskite layer could modulate the interface states at the 2D/3D interface.展开更多
Sodium-ion hybrid capacitors(SICs)offer inherent energy-power synergy but are constrained by mismatched kinetics and life spans between the anode and cathode materials.Two-dimensional MoS_(2)@C composites demonstrate ...Sodium-ion hybrid capacitors(SICs)offer inherent energy-power synergy but are constrained by mismatched kinetics and life spans between the anode and cathode materials.Two-dimensional MoS_(2)@C composites demonstrate excellent kinetics and structural stability,thanks to the built-in electric field of the carbon heterostructure and its adaptability to volume changes.Yet,the carbon shell imposes a physical barrier to interfacial Na^(+)diffusion,while deep discharge induces the formation of crystalline Na_(2)S,accompanied by severe volumetric expansion and sluggish reversibility—factors that accelerate capacity fading and structural degradation.To address these challenges,a trace-level Ni doping strategy is introduced,enabling precise modulation of the composite's interlayer structure,electronic configuration,and reaction pathway.Ni incorporation expands the MoS_(2) interlayer spacing,reconstructs short-range ordered nanocrystals within a hierarchically porous network,and promotes Na^(+)diffusion by weakening interlayer van der Waals forces.Orbital hybridization between Ni-3d and Mo-4d/S-3p states enhances electronic conductivity and reduces charge transfer resistance.Critically,Ni doping enhances electron transfer from Ni to sulfur,which weakens Na–S bonds and promotes the formation of amorphous Na_(2)S,thereby suppressing crystalline Na_(2)S and enabling a reversible MoS_(2)/Na_(2)S conversion mechanism for improved structural stability and cycling performance.As a result,the optimized MoS_(2)-Ni@C anode delivers a high reversible capacity of 334 mAh g^(-1)at 10 A g^(-1)with 68%retention after 10,000 cycles.When assembled into a SIC device(MoS_(2)-Ni@C//AC),it achieves an energy density of 135 Wh kg^(-1)at a power density of 60.8 kW kg^(-1)(based on anode mass),with 76%retention over 3,000 cycles.展开更多
To develop an efficient filter for removing white blood cells from whole blood,hydrophilic large-pore blended membranes of poly(vinylidene fluoride)(PVDF),polyvinyl pyrrolidone and polyethylene glycol,with good biocom...To develop an efficient filter for removing white blood cells from whole blood,hydrophilic large-pore blended membranes of poly(vinylidene fluoride)(PVDF),polyvinyl pyrrolidone and polyethylene glycol,with good biocompatibility,were prepared using the process of vapor-induced phase separation at various PVDF concentrations.The results demonstrated that at a PVDF mass concentration of 14%,the membrane had increased surface roughness,significantly enhanced hydrophilicity and wettability,and a wetting time of 8 s.The surface roughness of the membrane was also reduced to 31.637 nm.Furthermore,hemolysis rate and protein adsorption tests indicated that the blended membranes possessed excellent biocompatibility.They were reduced to 2.48%and 34.44μg·cm^(−2),respectively.The pore size of the fabricated membrane was relatively large,which reached approximately 8μm respectively,satisfying the filtration requirements.Lastly,the effects of different temperatures and multi-layered filters on leukocyte removal and the retention of red blood cells and platelets from whole blood were evaluated.The results revealed that the leukocyte removal rate was highest at 4℃ and with three membrane layers,the leukocyte removal rate was highest,reaching 98.36%,while the RBC and platelet content remained nearly unchanged compared with the original blood.This study provides a new approach for blood cell separation that is expected to play a significant role in medical fields such as blood transfusion demonstrating great potential for application and innovation.展开更多
Conversion-type electrode materials hold significant promise for potassium-ion batteries(PIBs)due to their high theoretical capacities,yet their practical deployment is hindered by sluggish kinetics and irreversible s...Conversion-type electrode materials hold significant promise for potassium-ion batteries(PIBs)due to their high theoretical capacities,yet their practical deployment is hindered by sluggish kinetics and irreversible structural degradation.To overcome these limitations,we propose a rationally engineered nanoreactor architecture that stabilizes defect-rich MoS_(2)via interlayer incorporation of a carbon monolayer,followed by encapsulation within a nitrogen-doped carbon shell,forming a MoSSe@NC heterostructure.This tailored structure synergistically accelerates both K^(+)diffusion kinetics and electron transfer,enabling unprecedented rate performance(107 mAh g^(-1)at 10 Ag^(-1))and ultralong cyclability(86.5%capacity retention after 1200 cycles at 3 A g^(-1)).Mechanistic insights reveal a distinctive“adsorption-conversion”pathway,where sulfur vacancies on exposed S-Mo-S basal planes act as preferential K^(+)adsorption sites,effectively suppressing parasitic phase transitions during intercalation.In situ X-ray diffraction and transmission electron microscopy corroborate the structural reversibility of the conversion reaction,with the carbon matrix dynamically accommodating strain while preserving electrode integrity.This work not only advances the understanding of defect-driven interfacial chemistry in conversion-type materials but also provides a versatile strategy for designing high-performance anodes in next-generation PIBs through heterostructure engineering.展开更多
Glacier landslide cascading hazards pose threats to communities and infrastructure,affected by complex processes including the amplification of mass flow volume through erosion and entrainment,transformation of hazard...Glacier landslide cascading hazards pose threats to communities and infrastructure,affected by complex processes including the amplification of mass flow volume through erosion and entrainment,transformation of hazard types,ice-water phase change,and enhanced mobility of the mass flow.Scientifically simulating these physical phenomena proves challenging.This study introduces GMFA(glacier mass flow analysis),an integrated numerical model that advances the field by:(1)proposing depth-averaged fluctuation energy and internal energy equations,(2)incorporating the ice-water phase change and the entrainment-deposition process,and(3)capturing their effects on mass flow runout characteristics.The model employs the finite volume method to solve the multi-physics coupled governing equations,enabling efficient large-scale simulations.The model is verified through three numerical tests covering flow dynamics,temperature evolution,and thermo-hydro-mechanical runout processes.The model is applied to analyze a hazard chain that occurred on 10 September 2020 on the Tibetan Plateau.The multi-scenario simulation results indicate an entrained mass volume of(4.95±0.11)×10^(5)m^(3),and a ratio of entrained mass volume to source material volume of 0.44.The solid concentration decreases from 0.6-0.7 to 0.1-0.15 with increasing runout distance,indicating a transition from avalanche to debris flood.The internal energy rises by(3-4)×10^(3)kJ/m^(3),driving rapid ice melting from 0.1 to 0.2 to near-zero concentration.The model effectively quantifies volume amplification,ice-water phase changes,and multi-hazard transformations.This model pushes the geoscience frontier,extending computational capability from single-to multi-hazard simulations and providing a powerful tool for analyzing glacier cascading hazards.展开更多
The absence of large-size gallium nitride(GaN) substrates with low dislocation density remains a primary bottleneck for advancing GaN-based devices. Here, we demonstrate the achievement of 8-inch freestanding GaN subs...The absence of large-size gallium nitride(GaN) substrates with low dislocation density remains a primary bottleneck for advancing GaN-based devices. Here, we demonstrate the achievement of 8-inch freestanding GaN substrates grown by hydride vapor phase epitaxy. Critical to this achievement is the improvement in gas-flow uniformity, which ensures exceptional thickness homogeneity and enables the crack-free growth of GaN. After laser lift-off(LLO) separation, the freestanding GaN substrate exhibits superior crystal quality, evidenced by full width at half maximum values of 68 and 54 arcsec for X-ray diffraction rocking curves of(002) and(102) planes, alongside a low dislocation density of 1.6 × 10^(6) cm^(-2). This approach establishes a robust pathway for the production of large-size GaN substrates, which are essential for advancing next-generation power electronics and high-efficiency photonics.展开更多
A multistage solution treatment process was applied for nickel-based single crystal superalloys,complemented by various aging durations and cooling rates.The microstructure was characterized by scanning electron micro...A multistage solution treatment process was applied for nickel-based single crystal superalloys,complemented by various aging durations and cooling rates.The microstructure was characterized by scanning electron microscopy(SEM)to observe the γ'phase.Additionally,phase field simulations were conducted to model the growth ofγ'precipitates during aging and analyze their morphological evolution.The experimental results demonstrated that the multistage solution treatment effectively eliminated eutectic phases and carbides.Moreover,samples aged for 10 min exhibited larger and more rectangularγ'precipitates compared with those aged for 5 min.Notably,secondary γ'precipitates were observed in samples subjected to water cooling.Two indices for quantifying rectangularization were proposed and successfully applied.Based on the simulation results,lattice mismatch induced coherency stresses and elevated stress triaxiality along the <111> direction contributed to the rectangularization of theγ'phase.展开更多
Water molecules can form hydrogen bonds.At the solid surfaces,the preferential alignment of water molecules due to the heterogeneous atomic distributions can induce ordered hydrogen bond networks of water molecules wi...Water molecules can form hydrogen bonds.At the solid surfaces,the preferential alignment of water molecules due to the heterogeneous atomic distributions can induce ordered hydrogen bond networks of water molecules with spatially heterogeneous patterns and slower dynamics compared to bulk water.Both the confinement and the surface atomic structures can induce the water phase transitions at low dimensional spaces.Here,we review how the phase transitions of interfacial water affect the surface physical behaviors,such as wetting,ice nucleation and the terahertz-wave-water interactions,from solid materials to the biological surfaces.These works help extend our knowledge of the physics properties of the interfacial water,particularly the multi-phase behaviors in materials and biology sciences.展开更多
文摘In the face of new diseases, medicine needs to reinvent itself in order to contain and control epidemics, such as the one we have recently faced, COVID-19, a disease with a wide spectrum of clinical severity. A new moment has been established, since the application of well-known, effective and safe medications for other diseases, has shown high success rates in the treatment of COVID-19. Thereunto, studies with early intervention are needed, which can change the unfavorable outcome of patients. In this article, we report the successful experience using an oral strategy during the collapse of Belem (Para, Brazil) Health System. Two hundred and ten patients were diagnosed with respiratory failure due to COVID-19, with no option of hospital treatment due to lack of beds and resources. These patients were then started on therapeutic regimen consisting of 40 mg prednisolone, 40 mg enoxaparin and macrolides (500 mg clarithromycin, 500 mg axetylcefuroxime) associated and followed in outpatient facilities. Two hundred and eight patients had an excellent therapeutic response and there were only two fatalities. These results push research boundaries, valuing outpatient treatment with early use of prednisolone in the initial pulmonary phase, preventing severe COVID-19 pneumonitis. Adoption of the proposed treatment intends to reduce the need for hospitalization, as well as lethality, with social robust benefits and incalculable economic savings since involves the use of accessible, safe and not expensive medications.
文摘In-situ tensile tests were conducted on a chemically corroded third-generation single-crystal superalloy DD9 at 980 and 1100℃.The phase transformation in the surface areas during the tensile process was analyzed using field emission scanning electron microscope,energy dispersive X-ray spectroscope,electron probe X-ray microanalysis,and transmission electron microscope.The phase transformation mechanism on the surface and the influence mechanism were studied through observation and dynamic calculation.During tensile tests at elevated temperatures,chemical corrosion promotes the precipitation of topologically close-packed(tcp)μphase andσphase on the alloy surface.Both the precipitation amount and size of these two phases on the surface at 1100℃are greater than those at 980℃.The precipitation of tcp phase on the alloy surface results in the formation of an influence layer on the surface area,and the distribution characteristics of alloying elements are significantly different from those of the substrate.The depth of the influence layer at 1100℃is greater than that at 980℃.The precipitation of tcp phase prompts the phase transition fromγphase toγ′phase around the tcp phase.
基金National Natural Science Foundation of China(12405168)The Fundamental Research Funds for the Central Universities,China(2024CDJXY004)。
文摘[Background]High harmonic cavities are widely used in electron storage rings to lengthen thebunch,lower the bunch peak current,thereby reducing the IBS effect,enhancing the Touschek lifetime,as well asproviding Landau damping,which is particularly important for storage rings operating with ultra-low emittance or atlow beam energy.[Purpose]To further increase the bunch length without additional hardware costs,the phasemodulation in a dual-RF system is considered.[Methods]In this paper,turn-by-turn simulations incorporating randomsynchrotron radiation excitation are conducted,and a brief analysis is presented to explain the bunch lengtheningmechanism.[Results]Simulation results reveal that the peak current can be further reduced,thereby mitigating IBSeffects and enhancing the Touschek lifetime.Although the energy spread increases,which tends to reduce thebrightness of higher-harmonic radiation from the undulator,the brightness of the fundamental harmonic can,in fact,beimproved.
基金Shaanxi Province Qin Chuangyuan“Scientist+Engineer”Team Construction Project(2022KXJ-071)2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project(2022JH-ZHFHTS-0012)+8 种基金Shaanxi Province Key Research and Development Plan-“Two Chains”Integration Key Project-Qin Chuangyuan General Window Industrial Cluster Project(2023QCY-LL-02)Xixian New Area Science and Technology Plan(2022-YXYJ-003,2022-XXCY-010)2024 Scientific Research Project of Shaanxi National Defense Industry Vocational and Technical College(Gfy24-07)Shaanxi Vocational and Technical Education Association 2024 Vocational Education Teaching Reform Research Topic(2024SZX354)National Natural Science Foundation of China(U24A20115)2024 Shaanxi Provincial Education Department Service Local Special Scientific Research Program Project-Industrialization Cultivation Project(24JC005,24JC063)Shaanxi Province“14th Five-Year Plan”Education Science Plan,2024 Project(SGH24Y3181)National Key Research and Development Program of China(2023YFB4606400)Longmen Laboratory Frontier Exploration Topics Project(LMQYTSKT003)。
文摘A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.U25A20232,52325208,52173217,52202128)the Interdisciplinary Research Project for Young Teachers of USTB(Grant No.FRF-IDRY24-002)。
文摘As electronic technology continues to evolve towards miniaturization and integration,the demand for micro-refrigeration technology in microelectronic systems is increasing.Ferroelectric(FE)refrigeration technology based on the electrocaloric effect(ECE)has emerged as a highly promising candidate in this field,due to its advantages of high energy efficiency,simple structure,easy miniaturization,low cost,and environmental friendliness.The EC performance of FE materials essentially depends on the phase transition features under the coupled electric and thermal fields,making the E–T phase diagram a core tool for decoding the underlying mechanism of ECE.This paper reviews the development of EC materials,focusing on the comprehensive study of E–T phase diagrams.By correlating the microscopic phase structure of FE materials with the macroscopic physical properties,it clarifies the manipulation mechanism for enhanced ECE performance,providing theoretical support for the targeted design of high-performance EC materials.In the future,the introduction of data-driven methods is expected to enable the high-throughput construction of FE phase diagrams,thereby accelerating the optimization of high-performance EC materials and promoting the practical application of FE refrigeration technology.
基金supported by the National Natural Science Foundation of China (Grant Nos.12274313 and 62375234)the Gusu Leading Talent Plan for Scientific and Technological Innovation and Entrepreneurship (Grant No.ZXL2024400)。
文摘Optical phase-gradient metasurfaces have garnered significant attention for enabling flexible light manipulation,with applications across diverse domains.In this work,we will demonstrate that the metasurfaces with phase gradient modulation can be used to achieve illusion optics,featuring the advantages of simple geometric structure and feasible implementation compared with the well-known transformation optics method.The underlying mechanism is the anomalous diffraction law caused by the phase gradient,which provides a theoretical basis for freely manipulating the propagation path of light.By considering a specific example,we will demonstrate that the phase gradient can transform spatial coordinates in real space into illusion space,thereby converting a plane in real space into a curved surface structure in illusion space to achieve the illusion effect.This approach provides a viable alternative to transformation optics for designing illusion devices.
基金financially supported by the Fundamental Research Funds for the Central Universities(No.FRF-KST-25-001)the Beijing Natural Science Foundation(No.L253029)。
文摘In the context of the global energy low-carbon transition,phase change energy storage technology becomes a key technology to solve the problem of intermittent renewable energy.Oriented phase change composites(OCPCMs)receive widespread attention in practical energy storage applications due to their unique oriented thermally conductive structure,which achieves significant thermal conductivity enhancement in specific directions while retaining the high energy storage capacity of the phase change components.This review systematically summarizes the overall analysis of OCPCMs from synthesis and preparation to application scenarios in recent years.Herein,we introduce the analysis of the heat transfer mechanism of the materials and explore the advantages of the oriented structure in OCPCMs in the heat transfer behavior from a bionic perspective.We then focus on summarizing and generalizing the methods for preparing OCPCMs,giving suggestions for suitable methods according to different scenarios.Besides,we discuss the application of finite element simulation methods to the monitoring of the thermal management behavior of OCPCMs,and look into the potential future application areas of such materials.Finally,it is hoped that this review will provide guidance for the academic community in developing high-performance OCPCMs.
基金supported by National Natural Science Foundation of China(Nos.12432018,12372346)the Innovative Research Groups of the National Natural Science Foundation of China(No.12221002)National Natural Science Foundation of China(No.12302493)。
文摘Material phase-transition represents a significant phenomenon and mechanism in the context of hypervelocity protection.This study presents a thorough analysis of the phase-transition phenomena induced by shock pressure as the shock wave propagates initially to the rear of the projectile.The shock wave that induces a phase-transition is commonly referred to as a macroscopic phase-transition wave,whereas the interface that separates the distinct phases is referred to as macroscopic phase-boundary.The contact interface between the spherical projectile and the thin plate,characterized by its curved surface,plays a significant role in the nonlinear propagation and evolution of wave systems.The pressure distribution along the central axis of a spherical projectile is derived in accordance with the linear decay law observed for axial pressure.On this basis,a quadratic function is employed to characterize the trend of changes in wave front pressure,thereby facilitating the establishment of a model for wave front pressure distribution.Using the phase-transition pressure criterion for materials,the wave front phase evolution process is derived,and the macroscopic phase-boundary is determined.Based on the geometric propagation model(GPM)and the pressure distribution of the wave front,a phase geometric propagation model(PGPM)is proposed.The phase distribution of a spherical projectile impacting a thin plate is obtained by theoretical methods.The accuracy of the PGPM is subsequently validated through a comparison of its results with those obtained from numerical simulations.
基金supported by the National Natural Science Foundation of China(52402166)the Science and Technology Development Fund+2 种基金Macao SAR(0065/2023/AFJ,0116/2022/A3)the Australian Research Council(DE220100154)the Natural Science Foundation of Guangdong Province(2025A1515011120)。
文摘The dissolvable polysulfides and sluggish Li_2S conversion kinetics are acknowledged as two significant challenges in the application lithium-sulfur(Li-S)batteries.Herein,we introduce a dual-doping strategy to modulate the electronic structure of MoS_(2),thereby obtaining a multifunctional catalyst that serves as an efficient sulfur host.The W/V dual single-atomdoped MoS_(2)grown on carbon nanofibers(CMWVS)demonstrates a strong adsorption ability for lithium polysulfides,suppressing the shuttle effects.Additionally,the doping process also results in the phase transition from 2H-MoS_(2)to 1T-MoS_(2)and generates sufficient edge sulfur atoms,promoting the charge/electron transfer and enriching the reaction sites.All these merits contribute to the superior conversion reaction kinetics,leading to the outstanding Li-S battery performance.When fabricated as cathodes by compositing with sulfur,the CMWVS/S cathode delivers a high capacity of 1481.7 mAh g^(-1)at 0.1 C(1 C=1672 mAh g^(-1))and maintains 816.3 m Ah g^(-1)after 1000 cycles at 1.0 C,indicating outstanding cycling stability.Even under a high sulfur loading of 7.9 mg cm^(-2)and lean electrolyte conditions(E/S ratio of 9.0μL mg^(-1)),the cathode achieves a high areal capacity of 8.2 m Ah cm^(-2),showing great promise for practical Li-S battery applications.This work broadens the scope of doping strategies in transition-metal dichalcogenides by tailoring their electronic structures,providing insightful direction for the rational development of high-efficiency electrocatalysts for advanced Li-S battery applications.
基金supported by the National Natural Science Foundation of China(Grant No.42171135)the Science and Technology Program of CNOOC Research Institute(Grant No.2023OTKK03)the“CUG Scholar”Scientific Research Funds at China University of Geosciences(Project No.2022098).
文摘The volume change behavior of natural gas hydrate-bearing sediment is essential as it influences settlement,strength,and stiffness,which directly affect the stability of hydrate reservoirs during hydrate extraction or in response to environmental changes.The volume change is influenced not only by stress but also by the formation and dissociation of hydrates.This study adopted a customized apparatus for one-dimensional compression tests,allowing independent control of gas pressure and effective stress.Tests were conducted on samples with different hydrate saturations along various temperature-gas pressure-effective stress paths,yielding some conclusions related to compressibility and creep.An unusual phenomenon was observed under low-stress conditions:hydrate formation led to shrinkage rather than expansion.Three potential mechanisms behind this occurrence were discussed.As hydrate saturation increases,the yield stress rises while the compression and swelling indexes remain minimally affected.After hydrate dissociation,the compression curve of hydrate-bearing sediment drops to that of hydrate-free sediment.Once hydrate is formed,the compression curve of hydrate-free sediment gradually approaches that of hydrate-bearing sediment during the subsequent loading.Under low-stress conditions,the creep of both hydrate-free and hydrate-bearing sediments is very weak.However,when stress increases,significantly beyond the yield stress,the creep of both sediments increases significantly,with hydrate-bearing sediment exhibiting much greater creep than hydrate-free sediment.
基金supported by the National Natural Science Foundation of China(Nos.62304111,62304110,22579136)the National Key Research and Development Program of China(2024YFE0201800)+6 种基金the China Postdoctoral Science Foundation(No.2024M761492)the Project of State Key Laboratory of Organic Electronics and Information Displays(Nos.GDX2022010009,GZR2023010046)the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications(No.NY223053)the Science and Technology Project of Jiangsu(Science and Technology Cooperation Project of HongKong,Macao and Taiwan,No.BZ2023059)Shaanxi Fundamental Science Research Project for Mathematics and Physics(No.22jSY015)Young Talent Fund of Xi'an Association for Science and Technology(No.959202313020)Guangdong Provincial Key Laboratory of Semiconductor Optoelectronic Materials and Intelligent Photonic Systems(No.2023B1212010003).
文摘Surface passivation via two-dimensional(2D)perovskite has emerged as a promising strategy to enhance the performance of perovskite solar cells(PSCs)due to the effective compensation of interfacial states.However,the in situ grown 2D perovskite passivation layers typically comprise a mixture of multiple dimensionalities at the interface,where band alignment has only been portrayed qualitatively and empirically.Herein,the interface states for precisely phase-tailored 2D perovskite passivated PSCs are quantitatively investigated.In comparison to traditional passivation molecules,2D perovskite layers based on 4-trifluoromethyl-phenylethylammonium iodide(CF3PEAI)exhibit an increased work function,introducing desirable downward band bending to eliminate the Schottky Barrier.Furthermore,precisely phase-tailored 2D layers could modulate the interface trap density and energetics.The n=1 film delivers optimal performance with a hole extraction efficiency of 95.1%.The optimized n-i-p PSCs in the two-step method significantly improve PCE to 25.40%,along with enhanced photostability and negligible hysteresis.It highlights that tailoring in the composition and phase distribution of the 2D perovskite layer could modulate the interface states at the 2D/3D interface.
基金supported by the Carbon Emission Peak and Neutrality of Jiangsu Province(BE2022031-4)the National Natural Science Foundation of China(Key Program)(52131306,52122209,52403001)+1 种基金the Project on National Key R&D Program of China(2021YFB2400400)the Cultivation Program for The Excellent Doctoral Dissertation of Nanjing Tech University。
文摘Sodium-ion hybrid capacitors(SICs)offer inherent energy-power synergy but are constrained by mismatched kinetics and life spans between the anode and cathode materials.Two-dimensional MoS_(2)@C composites demonstrate excellent kinetics and structural stability,thanks to the built-in electric field of the carbon heterostructure and its adaptability to volume changes.Yet,the carbon shell imposes a physical barrier to interfacial Na^(+)diffusion,while deep discharge induces the formation of crystalline Na_(2)S,accompanied by severe volumetric expansion and sluggish reversibility—factors that accelerate capacity fading and structural degradation.To address these challenges,a trace-level Ni doping strategy is introduced,enabling precise modulation of the composite's interlayer structure,electronic configuration,and reaction pathway.Ni incorporation expands the MoS_(2) interlayer spacing,reconstructs short-range ordered nanocrystals within a hierarchically porous network,and promotes Na^(+)diffusion by weakening interlayer van der Waals forces.Orbital hybridization between Ni-3d and Mo-4d/S-3p states enhances electronic conductivity and reduces charge transfer resistance.Critically,Ni doping enhances electron transfer from Ni to sulfur,which weakens Na–S bonds and promotes the formation of amorphous Na_(2)S,thereby suppressing crystalline Na_(2)S and enabling a reversible MoS_(2)/Na_(2)S conversion mechanism for improved structural stability and cycling performance.As a result,the optimized MoS_(2)-Ni@C anode delivers a high reversible capacity of 334 mAh g^(-1)at 10 A g^(-1)with 68%retention after 10,000 cycles.When assembled into a SIC device(MoS_(2)-Ni@C//AC),it achieves an energy density of 135 Wh kg^(-1)at a power density of 60.8 kW kg^(-1)(based on anode mass),with 76%retention over 3,000 cycles.
基金The National Key Research and Development Program of China(2020YFC0862903)Supported by Jiangsu Future Membrane Technology Innovation Center(BM2021804)National Foreign Expert Program(H20240294).
文摘To develop an efficient filter for removing white blood cells from whole blood,hydrophilic large-pore blended membranes of poly(vinylidene fluoride)(PVDF),polyvinyl pyrrolidone and polyethylene glycol,with good biocompatibility,were prepared using the process of vapor-induced phase separation at various PVDF concentrations.The results demonstrated that at a PVDF mass concentration of 14%,the membrane had increased surface roughness,significantly enhanced hydrophilicity and wettability,and a wetting time of 8 s.The surface roughness of the membrane was also reduced to 31.637 nm.Furthermore,hemolysis rate and protein adsorption tests indicated that the blended membranes possessed excellent biocompatibility.They were reduced to 2.48%and 34.44μg·cm^(−2),respectively.The pore size of the fabricated membrane was relatively large,which reached approximately 8μm respectively,satisfying the filtration requirements.Lastly,the effects of different temperatures and multi-layered filters on leukocyte removal and the retention of red blood cells and platelets from whole blood were evaluated.The results revealed that the leukocyte removal rate was highest at 4℃ and with three membrane layers,the leukocyte removal rate was highest,reaching 98.36%,while the RBC and platelet content remained nearly unchanged compared with the original blood.This study provides a new approach for blood cell separation that is expected to play a significant role in medical fields such as blood transfusion demonstrating great potential for application and innovation.
基金financially supported by the supported by Shandong Provincial Natural Science Foundation(ZR2024MB108)Taishan Young Scholar Program(tsqn202312312)Excellent Young Scholars of the Shandong Provincial Natural Science Foundation(Overseas)(2023HWYQ-112)。
文摘Conversion-type electrode materials hold significant promise for potassium-ion batteries(PIBs)due to their high theoretical capacities,yet their practical deployment is hindered by sluggish kinetics and irreversible structural degradation.To overcome these limitations,we propose a rationally engineered nanoreactor architecture that stabilizes defect-rich MoS_(2)via interlayer incorporation of a carbon monolayer,followed by encapsulation within a nitrogen-doped carbon shell,forming a MoSSe@NC heterostructure.This tailored structure synergistically accelerates both K^(+)diffusion kinetics and electron transfer,enabling unprecedented rate performance(107 mAh g^(-1)at 10 Ag^(-1))and ultralong cyclability(86.5%capacity retention after 1200 cycles at 3 A g^(-1)).Mechanistic insights reveal a distinctive“adsorption-conversion”pathway,where sulfur vacancies on exposed S-Mo-S basal planes act as preferential K^(+)adsorption sites,effectively suppressing parasitic phase transitions during intercalation.In situ X-ray diffraction and transmission electron microscopy corroborate the structural reversibility of the conversion reaction,with the carbon matrix dynamically accommodating strain while preserving electrode integrity.This work not only advances the understanding of defect-driven interfacial chemistry in conversion-type materials but also provides a versatile strategy for designing high-performance anodes in next-generation PIBs through heterostructure engineering.
基金supports from the National Natural Science Foundation of China(Grant No.U20A20112)the Research Grants Council of the Hong Kong SAR Government,China(Grant Nos.T22-606/23-R and 16206923).
文摘Glacier landslide cascading hazards pose threats to communities and infrastructure,affected by complex processes including the amplification of mass flow volume through erosion and entrainment,transformation of hazard types,ice-water phase change,and enhanced mobility of the mass flow.Scientifically simulating these physical phenomena proves challenging.This study introduces GMFA(glacier mass flow analysis),an integrated numerical model that advances the field by:(1)proposing depth-averaged fluctuation energy and internal energy equations,(2)incorporating the ice-water phase change and the entrainment-deposition process,and(3)capturing their effects on mass flow runout characteristics.The model employs the finite volume method to solve the multi-physics coupled governing equations,enabling efficient large-scale simulations.The model is verified through three numerical tests covering flow dynamics,temperature evolution,and thermo-hydro-mechanical runout processes.The model is applied to analyze a hazard chain that occurred on 10 September 2020 on the Tibetan Plateau.The multi-scenario simulation results indicate an entrained mass volume of(4.95±0.11)×10^(5)m^(3),and a ratio of entrained mass volume to source material volume of 0.44.The solid concentration decreases from 0.6-0.7 to 0.1-0.15 with increasing runout distance,indicating a transition from avalanche to debris flood.The internal energy rises by(3-4)×10^(3)kJ/m^(3),driving rapid ice melting from 0.1 to 0.2 to near-zero concentration.The model effectively quantifies volume amplification,ice-water phase changes,and multi-hazard transformations.This model pushes the geoscience frontier,extending computational capability from single-to multi-hazard simulations and providing a powerful tool for analyzing glacier cascading hazards.
基金supported by the National Key Research and Development Program of China (Nos. 2022YFB3605203 and 2022YFB3608100)the National Natural Science Foundation of China (Nos. 62321004, 62227817, and 62374001)。
文摘The absence of large-size gallium nitride(GaN) substrates with low dislocation density remains a primary bottleneck for advancing GaN-based devices. Here, we demonstrate the achievement of 8-inch freestanding GaN substrates grown by hydride vapor phase epitaxy. Critical to this achievement is the improvement in gas-flow uniformity, which ensures exceptional thickness homogeneity and enables the crack-free growth of GaN. After laser lift-off(LLO) separation, the freestanding GaN substrate exhibits superior crystal quality, evidenced by full width at half maximum values of 68 and 54 arcsec for X-ray diffraction rocking curves of(002) and(102) planes, alongside a low dislocation density of 1.6 × 10^(6) cm^(-2). This approach establishes a robust pathway for the production of large-size GaN substrates, which are essential for advancing next-generation power electronics and high-efficiency photonics.
基金supported by the Stable Support Project and the Major National Science and Technology Project,China(Nos.2017-Ⅶ-0008-0101,2017-Ⅵ-0003-0073)。
文摘A multistage solution treatment process was applied for nickel-based single crystal superalloys,complemented by various aging durations and cooling rates.The microstructure was characterized by scanning electron microscopy(SEM)to observe the γ'phase.Additionally,phase field simulations were conducted to model the growth ofγ'precipitates during aging and analyze their morphological evolution.The experimental results demonstrated that the multistage solution treatment effectively eliminated eutectic phases and carbides.Moreover,samples aged for 10 min exhibited larger and more rectangularγ'precipitates compared with those aged for 5 min.Notably,secondary γ'precipitates were observed in samples subjected to water cooling.Two indices for quantifying rectangularization were proposed and successfully applied.Based on the simulation results,lattice mismatch induced coherency stresses and elevated stress triaxiality along the <111> direction contributed to the rectangularization of theγ'phase.
基金supported by the National Natural Science Foundation of China(Grant Nos.22576126,12074394,12022508).
文摘Water molecules can form hydrogen bonds.At the solid surfaces,the preferential alignment of water molecules due to the heterogeneous atomic distributions can induce ordered hydrogen bond networks of water molecules with spatially heterogeneous patterns and slower dynamics compared to bulk water.Both the confinement and the surface atomic structures can induce the water phase transitions at low dimensional spaces.Here,we review how the phase transitions of interfacial water affect the surface physical behaviors,such as wetting,ice nucleation and the terahertz-wave-water interactions,from solid materials to the biological surfaces.These works help extend our knowledge of the physics properties of the interfacial water,particularly the multi-phase behaviors in materials and biology sciences.
