Phenol is an important raw material.The pre-sent industrial method of a multistep and indirect syn-thesis of phenol from benzene has the disadvantages of a long synthetic route,large consumption of raw ma-terial and s...Phenol is an important raw material.The pre-sent industrial method of a multistep and indirect syn-thesis of phenol from benzene has the disadvantages of a long synthetic route,large consumption of raw ma-terial and serious environment pollution.The direct oxidization of benzene to phenol under mild conditions is being sought for researches[1~3].The reaction-con-trolled phase-transfer catalyst[4-6]developed recently is a kind of environmentally friendly catalyst.The re-action-controlled phase-transfer catalyst can be recov-ered,like a heterogeneous catalyst,but also acts as a homogeneous catalyst.The reaction-controlled phase-transfer catalyst possesses the above advantages and it is significant to design and synthesize such a catalyst,but there have been few reports concerning the prepa-ration of this kind of catalysts.展开更多
A highly effective and mild protocol for ring opening of epoxides with NH4SCN in the presence of catalytic amount of a multi- site phase-transfer catalyst, α,α＇,α＂-N-hexakis（triethylammoniummethylene chloride）-...A highly effective and mild protocol for ring opening of epoxides with NH4SCN in the presence of catalytic amount of a multi- site phase-transfer catalyst, α,α＇,α＂-N-hexakis（triethylammoniummethylene chloride）-melamine, is developed. A variety of ^-hydroxy thiocyanates as important intermediates in agricultural and pharmaceutical chemistry were obtained in high yields with excellent regioselectivity and in short reaction times. 2009 Ali Reza Kiasat. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
A new reaction-controlled phase-transfer catalyst system was designed and synthesized. In this system, heteropolytungstate [C7H7N(CH3)3]9PW9O34 was used for catalytic epoxidation of cyclohexene with H2O2 as the oxida...A new reaction-controlled phase-transfer catalyst system was designed and synthesized. In this system, heteropolytungstate [C7H7N(CH3)3]9PW9O34 was used for catalytic epoxidation of cyclohexene with H2O2 as the oxidant. The conversion of H2O2 was 100% and the yield of cyclohexene oxide was 87.1% based on cyclohexene. Infrared spectra showed that both fresh catalyst and the recovered catalyst do have completely same absorption peak, indicating the structure of catalyst is very stability and can be recycled.展开更多
A new series of chiral phase-transfer catalysts 7a-7h were designed and synthesized from L-proline with moderate to good yields.＇The catalytic activity of 7a-Th for the asymmetric alkylation of glycine Schiff bases w...A new series of chiral phase-transfer catalysts 7a-7h were designed and synthesized from L-proline with moderate to good yields.＇The catalytic activity of 7a-Th for the asymmetric alkylation of glycine Schiff bases was evaluated, and some interesting relationships between structure and catalytic activity were revealed.展开更多
Using 4-Dialkylaminopyridinium salt as a thermal stable phase-transfer catalyst (PTC), the excellent results were obtained in the halogen-exchange fluorination.
A series of heteropolytungstates has been synthesized and utilized as catalysts to catalyze oxidation of benzyl alcohol with aqueous hydrogen peroxide. The results indicated that three of these catalysts showed the pr...A series of heteropolytungstates has been synthesized and utilized as catalysts to catalyze oxidation of benzyl alcohol with aqueous hydrogen peroxide. The results indicated that three of these catalysts showed the properties of reaction-controlled phasetransfer catalysis, and they had excellent catalytic ability to the oxidation of benzyl alcohol. No other by-products were detected by gas chromatography. Once the hydrogen peroxide was consumed completely, the catalyst precipitated from solvent, and the results of the catalyst recycle showed that the catalyst had high stability.展开更多
Ionic liquids （ILs） based on 1,3-dialkylimidazolium and tetraalkylammonium cations were employed as a series of efficient, environmentally benign phase-transfer catalysts （PTCs） for the base-promoted monoalkylatio...Ionic liquids （ILs） based on 1,3-dialkylimidazolium and tetraalkylammonium cations were employed as a series of efficient, environmentally benign phase-transfer catalysts （PTCs） for the base-promoted monoalkylation of diethyl malonate. The influence of various heterogeneous bases on yields was studied. Good yields and high selectivity were obtained. Solvent-free, mild reaction condition, short reaction time, and easy purification were the merits of this method. The catalytic system （IL-hase） could also be recycled after the extraction of products with ether.展开更多
A new catalytic process for the synthesis of aldehyde from alcohol by oxidation with H202 with high selectivity, was studied. In this system, heteropolymolybdate [C7H7N（CH3）3]3 {PO4[MoO（O2）2]4} was utilized as the...A new catalytic process for the synthesis of aldehyde from alcohol by oxidation with H202 with high selectivity, was studied. In this system, heteropolymolybdate [C7H7N（CH3）3]3 {PO4[MoO（O2）2]4} was utilized as the reaction-controlled phase-transfer catalyst to catalyze oxidation of benzyl and aliphatic alcohols. The molar ratio of H2O2 and alcohol was 0.75, no other by-products were detected by gas chromatography, the results of oxidation reaction indicated that the catalyst has high activity and stability.展开更多
A new reaction-controlled phase-transfer catalyst system, lacunary Keggin polyoxotungstate [C7H7N(CH3)3]9PW9O34 has been synthesized and used for catalytic epoxidation of olefins with H2O2 as t...A new reaction-controlled phase-transfer catalyst system, lacunary Keggin polyoxotungstate [C7H7N(CH3)3]9PW9O34 has been synthesized and used for catalytic epoxidation of olefins with H2O2 as the oxidant. Infrared spectra were used to analyze the behavior of the phase transfer of catalyst. In this system, the catalyst not only can act as homogeneous catalyst but also as heterogeneous catalyst to be easily filtered and reused. The epoxi- dation reaction is clean and exhibits high conversion and selectivity as well as excellent catalyst stability.展开更多
Chiral phase-transfer catalysts, derived from cinchona alkaloids and Fréchet dendritic wedges up to generation two, have been synthesized. These chiral dendritic molecules have been used as PTCs in the epoxidatio...Chiral phase-transfer catalysts, derived from cinchona alkaloids and Fréchet dendritic wedges up to generation two, have been synthesized. These chiral dendritic molecules have been used as PTCs in the epoxidation of α, β-enones, showing a moderate level of asymmetric induction.展开更多
Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen e...Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.展开更多
Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon...Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.展开更多
To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content ...To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.展开更多
Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction...Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.展开更多
High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environm...High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environments,tunable electronic structures,abundant unsaturated active sites,and dynamic structural reassembly—collectively enhance electrochemical activity and durability under operating conditions.This review summarizes recent advances in HEACs for hydrogen evolution,oxygen evolution,and overall water splitting,highlighting their disorder-driven advantages over crystalline counterparts.Catalytic performance benchmarks are presented,and mechanistic insights are discussed,focusing on how multimetallic synergy,amorphization effect,and in‐situ reconstruction cooperatively regulate reaction pathways.These insights provide guidance for the rational design of next‐generation amorphous high‐entropy electrocatalysts with improved efficiency and durability.展开更多
Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespr...Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespread attention for CO_(2)RR due to their high catalytic activity,selectivity,excellent stability,and low cost.However,they still need to be further improved to meet the needs of industrial applications.This review article comprehensively summarizes the recent advances in regulation strategies of Bi-based catalysts and can be divided into six categories:(1)defect engineering,(2)atomic doping engineering,(3)organic framework engineering,(4)inorganic heterojunction engineering,(5)crystal face engineering,and(6)alloying and polarization engineering.Meanwhile,the corresponding catalytic mechanisms of each regulation strategy will also be discussed in detail,aiming to enable researchers to understand the structure-property relationship of the improved Bibased catalysts fundamentally.Finally,the challenges and future opportunities of the Bi-based catalysts in the photoelectrocatalytic CO_(2)RR application field will also be featured from the perspectives of the(1)combination or synergy of multiple regulatory strategies,(2)revealing formation mechanism and realizing controllable synthesis,and(3)in situ multiscale investigation of activation pathways and uncovering the catalytic mechanisms.On the one hand,through the comparative analysis and mechanism explanation of the six major regulatory strategies,a multidimensional knowledge framework of the structure-activity relationship of Bi-based catalysts can be constructed for researchers,which not only deepens the atomic-level understanding of catalytic active sites,charge transport paths,and the adsorption behavior of intermediate products,but also provides theoretical guiding principles for the controllable design of new catalysts;on the other hand,the promising collaborative regulation strategies,controllable synthetic paths,and the in situ multiscale characterization techniques presented in this work provides a paradigm reference for shortening the research and development cycle of high-performance catalysts,conducive to facilitating the transition of photoelectrocatalytic CO_(2)RR technology from the laboratory routes to industrial application.展开更多
A highly effective phase transfer of a quaternary ammonium gemini surfactant with ester groups（（diethylhexanedioate） diyl-a,v-bis（dimethyl dodecyl ammonium bromide） referred to as 12-10-12）was synthesized with h...A highly effective phase transfer of a quaternary ammonium gemini surfactant with ester groups（（diethylhexanedioate） diyl-a,v-bis（dimethyl dodecyl ammonium bromide） referred to as 12-10-12）was synthesized with high yield and characterized by infrared spectroscopy, elemental analysis and1 HNMR. Then, 12-10-12 was used as a phase transfer catalyst to study the catalytic effect on the reaction of anhydrous sodium acetate and 4-methylbenzyl chloride. The possible catalytic mechanism and the influence of surfactant concentration, temperature and type are also discussed. The experimental results showed that the catalysis efficiency was more active than the traditional, single-chained surfactant,tetrabutyl ammonium bromide. It also revealed that the reaction was first-order with respect to the concentration of 4-methylbenzyl chloride. The concentration of 4-methylbenzyl chloride grew linearly with the concentration of 12-10-12 and as the reaction temperature increased. The optimum reaction time was 7 h.展开更多
Fast phase-transferring was adopted in ethanol solution at the condition of n (oil-soluble tea pol-yphenol): N (As3﹢) = 2:1, 4:1, 6:1, pH = 4.0, temperature 40°C - 45°C, action period of 15 h to compo...Fast phase-transferring was adopted in ethanol solution at the condition of n (oil-soluble tea pol-yphenol): N (As3﹢) = 2:1, 4:1, 6:1, pH = 4.0, temperature 40°C - 45°C, action period of 15 h to compose the target, of which the productivity was 59%, UV was 267.50, 218.00, 220.50 nm, FTIR was 6291, 34158.6, 2850.2, 1708.2;1457.3;1370.4, 1224.2, 1144.0, 760.5 cm﹣1, fluorescence value λmax = 257, 591.1, 593.7, 590.3, 591.0, 591.5, XRD λ/nm is 3.6974, 4.186, 12.0762, 15.4747, 1H-NMRδ = 0.782, 1.193, 1.483 - 1.586, 1.959 - 2.184, 2.479, 3.116, 3.970 - 3.981, 5.231 - 5.753, 6.537 - 7.300. Finally it was ascertained through XRD as double-coordinated polycrystal compound.展开更多
S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB...S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.展开更多
文摘Phenol is an important raw material.The pre-sent industrial method of a multistep and indirect syn-thesis of phenol from benzene has the disadvantages of a long synthetic route,large consumption of raw ma-terial and serious environment pollution.The direct oxidization of benzene to phenol under mild conditions is being sought for researches[1~3].The reaction-con-trolled phase-transfer catalyst[4-6]developed recently is a kind of environmentally friendly catalyst.The re-action-controlled phase-transfer catalyst can be recov-ered,like a heterogeneous catalyst,but also acts as a homogeneous catalyst.The reaction-controlled phase-transfer catalyst possesses the above advantages and it is significant to design and synthesize such a catalyst,but there have been few reports concerning the prepa-ration of this kind of catalysts.
基金the partial support of this work by Shahid Chamran Research Council
文摘A highly effective and mild protocol for ring opening of epoxides with NH4SCN in the presence of catalytic amount of a multi- site phase-transfer catalyst, α,α＇,α＂-N-hexakis（triethylammoniummethylene chloride）-melamine, is developed. A variety of ^-hydroxy thiocyanates as important intermediates in agricultural and pharmaceutical chemistry were obtained in high yields with excellent regioselectivity and in short reaction times. 2009 Ali Reza Kiasat. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
文摘A new reaction-controlled phase-transfer catalyst system was designed and synthesized. In this system, heteropolytungstate [C7H7N(CH3)3]9PW9O34 was used for catalytic epoxidation of cyclohexene with H2O2 as the oxidant. The conversion of H2O2 was 100% and the yield of cyclohexene oxide was 87.1% based on cyclohexene. Infrared spectra showed that both fresh catalyst and the recovered catalyst do have completely same absorption peak, indicating the structure of catalyst is very stability and can be recycled.
基金National Natural Science Foundation of China (Grant No. 20802004)
文摘A new series of chiral phase-transfer catalysts 7a-7h were designed and synthesized from L-proline with moderate to good yields.＇The catalytic activity of 7a-Th for the asymmetric alkylation of glycine Schiff bases was evaluated, and some interesting relationships between structure and catalytic activity were revealed.
基金the Natural Science Foundation of Zhejiang Province (No. 299024).
文摘Using 4-Dialkylaminopyridinium salt as a thermal stable phase-transfer catalyst (PTC), the excellent results were obtained in the halogen-exchange fluorination.
文摘A series of heteropolytungstates has been synthesized and utilized as catalysts to catalyze oxidation of benzyl alcohol with aqueous hydrogen peroxide. The results indicated that three of these catalysts showed the properties of reaction-controlled phasetransfer catalysis, and they had excellent catalytic ability to the oxidation of benzyl alcohol. No other by-products were detected by gas chromatography. Once the hydrogen peroxide was consumed completely, the catalyst precipitated from solvent, and the results of the catalyst recycle showed that the catalyst had high stability.
文摘Ionic liquids （ILs） based on 1,3-dialkylimidazolium and tetraalkylammonium cations were employed as a series of efficient, environmentally benign phase-transfer catalysts （PTCs） for the base-promoted monoalkylation of diethyl malonate. The influence of various heterogeneous bases on yields was studied. Good yields and high selectivity were obtained. Solvent-free, mild reaction condition, short reaction time, and easy purification were the merits of this method. The catalytic system （IL-hase） could also be recycled after the extraction of products with ether.
文摘A new catalytic process for the synthesis of aldehyde from alcohol by oxidation with H202 with high selectivity, was studied. In this system, heteropolymolybdate [C7H7N（CH3）3]3 {PO4[MoO（O2）2]4} was utilized as the reaction-controlled phase-transfer catalyst to catalyze oxidation of benzyl and aliphatic alcohols. The molar ratio of H2O2 and alcohol was 0.75, no other by-products were detected by gas chromatography, the results of oxidation reaction indicated that the catalyst has high activity and stability.
基金Project supported by the National Natural 863 Plan of China (No. 2001AA33440203).
文摘A new reaction-controlled phase-transfer catalyst system, lacunary Keggin polyoxotungstate [C7H7N(CH3)3]9PW9O34 has been synthesized and used for catalytic epoxidation of olefins with H2O2 as the oxidant. Infrared spectra were used to analyze the behavior of the phase transfer of catalyst. In this system, the catalyst not only can act as homogeneous catalyst but also as heterogeneous catalyst to be easily filtered and reused. The epoxi- dation reaction is clean and exhibits high conversion and selectivity as well as excellent catalyst stability.
文摘Chiral phase-transfer catalysts, derived from cinchona alkaloids and Fréchet dendritic wedges up to generation two, have been synthesized. These chiral dendritic molecules have been used as PTCs in the epoxidation of α, β-enones, showing a moderate level of asymmetric induction.
基金Supported by the National Natural Science Foundation of China(No.52273056)the Science and Technology Development Program of Jilin Province,China(No.YDZJ202501ZYTS305)。
文摘Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.
基金Supported by the National Key Research and Development Program of China(2023YFB4104500,2023YFB4104502)the National Natural Science Foundation of China(22138013)the Taishan Scholar Project(ts201712020).
文摘Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.
基金Supported by the Science and Technology Cooperation and Exchange special project of Cooperation of Shanxi Province(202404041101014)the Fundamental Research Program of Shanxi Province(202403021212333)+3 种基金the Joint Funds of the National Natural Science Foundation of China(U24A20555)the Lvliang Key R&D of University-Local Cooperation(2023XDHZ10)the Initiation Fund for Doctoral Research of Taiyuan University of Science and Technology(20242026)the Outstanding Doctor Funding Award of Shanxi Province(20242080).
文摘To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.
基金funded by the Innovative Research Group Project of the National Natural Science Foundation of China(52121004)the Research Development Fund(No.RDF-21-02-060)by Xi’an Jiaotong-Liverpool University+1 种基金support received from the Suzhou Industrial Park High Quality Innovation Platform of Functional Molecular Materials and Devices(YZCXPT2023105)the XJTLU Advanced Materials Research Center(AMRC).
文摘Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.
基金supported by the Australian Research Council(ARC)Projects(DP220101139,DP220101142,and LP240100542).
文摘High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environments,tunable electronic structures,abundant unsaturated active sites,and dynamic structural reassembly—collectively enhance electrochemical activity and durability under operating conditions.This review summarizes recent advances in HEACs for hydrogen evolution,oxygen evolution,and overall water splitting,highlighting their disorder-driven advantages over crystalline counterparts.Catalytic performance benchmarks are presented,and mechanistic insights are discussed,focusing on how multimetallic synergy,amorphization effect,and in‐situ reconstruction cooperatively regulate reaction pathways.These insights provide guidance for the rational design of next‐generation amorphous high‐entropy electrocatalysts with improved efficiency and durability.
基金supports from the National Natural Science Foundation of China(Grant Nos.12305372 and 22376217)the National Key Research&Development Program of China(Grant Nos.2022YFA1603802 and 2022YFB3504100)+1 种基金the projects of the key laboratory of advanced energy materials chemistry,ministry of education(Nankai University)key laboratory of Jiangxi Province for persistent pollutants prevention control and resource reuse(2023SSY02061)are gratefully acknowledged.
文摘Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespread attention for CO_(2)RR due to their high catalytic activity,selectivity,excellent stability,and low cost.However,they still need to be further improved to meet the needs of industrial applications.This review article comprehensively summarizes the recent advances in regulation strategies of Bi-based catalysts and can be divided into six categories:(1)defect engineering,(2)atomic doping engineering,(3)organic framework engineering,(4)inorganic heterojunction engineering,(5)crystal face engineering,and(6)alloying and polarization engineering.Meanwhile,the corresponding catalytic mechanisms of each regulation strategy will also be discussed in detail,aiming to enable researchers to understand the structure-property relationship of the improved Bibased catalysts fundamentally.Finally,the challenges and future opportunities of the Bi-based catalysts in the photoelectrocatalytic CO_(2)RR application field will also be featured from the perspectives of the(1)combination or synergy of multiple regulatory strategies,(2)revealing formation mechanism and realizing controllable synthesis,and(3)in situ multiscale investigation of activation pathways and uncovering the catalytic mechanisms.On the one hand,through the comparative analysis and mechanism explanation of the six major regulatory strategies,a multidimensional knowledge framework of the structure-activity relationship of Bi-based catalysts can be constructed for researchers,which not only deepens the atomic-level understanding of catalytic active sites,charge transport paths,and the adsorption behavior of intermediate products,but also provides theoretical guiding principles for the controllable design of new catalysts;on the other hand,the promising collaborative regulation strategies,controllable synthetic paths,and the in situ multiscale characterization techniques presented in this work provides a paradigm reference for shortening the research and development cycle of high-performance catalysts,conducive to facilitating the transition of photoelectrocatalytic CO_(2)RR technology from the laboratory routes to industrial application.
基金supported by the Talent Foundation of Anhui Science and Technology University (No. ZRC2014401)
文摘A highly effective phase transfer of a quaternary ammonium gemini surfactant with ester groups（（diethylhexanedioate） diyl-a,v-bis（dimethyl dodecyl ammonium bromide） referred to as 12-10-12）was synthesized with high yield and characterized by infrared spectroscopy, elemental analysis and1 HNMR. Then, 12-10-12 was used as a phase transfer catalyst to study the catalytic effect on the reaction of anhydrous sodium acetate and 4-methylbenzyl chloride. The possible catalytic mechanism and the influence of surfactant concentration, temperature and type are also discussed. The experimental results showed that the catalysis efficiency was more active than the traditional, single-chained surfactant,tetrabutyl ammonium bromide. It also revealed that the reaction was first-order with respect to the concentration of 4-methylbenzyl chloride. The concentration of 4-methylbenzyl chloride grew linearly with the concentration of 12-10-12 and as the reaction temperature increased. The optimum reaction time was 7 h.
文摘Fast phase-transferring was adopted in ethanol solution at the condition of n (oil-soluble tea pol-yphenol): N (As3﹢) = 2:1, 4:1, 6:1, pH = 4.0, temperature 40°C - 45°C, action period of 15 h to compose the target, of which the productivity was 59%, UV was 267.50, 218.00, 220.50 nm, FTIR was 6291, 34158.6, 2850.2, 1708.2;1457.3;1370.4, 1224.2, 1144.0, 760.5 cm﹣1, fluorescence value λmax = 257, 591.1, 593.7, 590.3, 591.0, 591.5, XRD λ/nm is 3.6974, 4.186, 12.0762, 15.4747, 1H-NMRδ = 0.782, 1.193, 1.483 - 1.586, 1.959 - 2.184, 2.479, 3.116, 3.970 - 3.981, 5.231 - 5.753, 6.537 - 7.300. Finally it was ascertained through XRD as double-coordinated polycrystal compound.
基金financially supported by the National Natural Science Foundation of China(Nos.51602018 and 51902018)the Natural Science Foundation of Beijing Municipality(No.2154052)+3 种基金the China Postdoctoral Science Foundation(No.2014M560044)the Fundamental Research Funds for the Central Universities(No.FRF-MP-20-22)USTB Research Center for International People-to-people Exchange in Science,Technology and Civilization(No.2022KFYB007)Education and Teaching Reform Foundation at University of Science and Technology Beijing(Nos.2023JGC027,KC2022QYW06,and KC2022TS09)。
文摘S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.
