Topology optimization stands as a pivotal technique in realizing periodic microstructure design.A novel approach is proposed,integrating the energy-based homogenization method with the Floating Projection Topology Opt...Topology optimization stands as a pivotal technique in realizing periodic microstructure design.A novel approach is proposed,integrating the energy-based homogenization method with the Floating Projection Topology Optimization(FPTO)method to achieve smooth topology design.The objective is to optimize the periodic microstructure to maximize the properties of specific materials,such as bulk modulus and shear modulus,or to achieve negative Poisson's ratio.Linear material interpolation is used to eliminate the nonlinear challenges and design dependence caused by material penalty.Furthermore,the three-field density representation technique is applied to augment length scales and solid/void characteristics.Through systematic analysis and numerical simulations,the impacts of various initial designs and optimization parameters on the optimization outcomes are investigated.The results demonstrate that the optimized periodic microstructures exhibit extreme performance with clear boundaries.The identification of appropriate optimization parameters is crucial for enhancing the extreme mechanical properties of material microstructures.It can provide valuable guidance for aerospace component design involving material microstructures and metamaterials.展开更多
It is a commonly asked question:how big should the longwall shields be? The answer is a key aspect of a longwall mining feasibility study when the consequences of inadequately rated shields are considered.This paper a...It is a commonly asked question:how big should the longwall shields be? The answer is a key aspect of a longwall mining feasibility study when the consequences of inadequately rated shields are considered.This paper addresses this question based on the measured nature of the loading environment in which shields are required to operate,the various geological and geometrical controls of that environment and the various links between their load rating,a range of other relevant shield design factors and the loss event they are required to prevent a major roof collapse on the longwall face.The paper concludes that despite the tremendous advances that have been made in shield design and load rating over the past50 years,the same drivers that caused longwall miners of the past to seek improved roof control on the longwall face via the use of ever-higher rated shields,are still as relevant today.However at the current time,the limits of the largest available longwall shields have yet to be tested,therefore industry focus for the foreseeable future should possibly be in achieving the maximum level of roof control on the face via their optimum operational use rather than considering further shield rating increases and incurring the inevitable downsides in terms of capital cost and shield weight.展开更多
According to the results of site seismic hazard analysis accomplished in the past decades, 96 site-related design spectra are selected as samples in this study. The result shows that the value of the corner period (T ...According to the results of site seismic hazard analysis accomplished in the past decades, 96 site-related design spectra are selected as samples in this study. The result shows that the value of the corner period (T g) of the design spectrum in GBJ11-89 (China Seismic Building Code, issued in 1989) is lower than the value obtained by site seismic hazard analysis. The same situation exists when we compare the design spectra of the Codes to the spectra according to the earthquake records. The value in current seismic design code, GBJ50011-2001 issued in 2001, is greater than that in GBJ11-89, but still less than the value obtained by site seismic hazard analysis. If we accept the value got by site seismic hazard analysis, we have a suspicion that 2/3 of buildings built according to GBJ11-89 will not be safe when an earthquake with 2% probability of exceedance in 50 years occurs.展开更多
A new kind of one-dimensional multilayer phononie heterostructure is constructed to obtain a broad acoustic omnidirectional reflection （ODR） band. The heterostructure is formed by combining finite periodic phononic ...A new kind of one-dimensional multilayer phononie heterostructure is constructed to obtain a broad acoustic omnidirectional reflection （ODR） band. The heterostructure is formed by combining finite periodic phononic crystals （PnCs） and Fibonacci （or Thue-Morse） quasiperiodic PnCs. From the numerical results performed by the transfer matrix method, it is found that the ODR bands can be enlarged obviously by using the combination of periodic and quasi-periodic PnCs. Moreover, an application of particle swarm optimization in designing and optimizing acoustic ODR bands is reported. With regards to different thickness ratios and periodic numbers in the heterostructure, we give some optimization examples and finally achieve phononic heterostructure with a very broad ODR bandwidth. The result provides a new approach to achieve broad acoustic ODR bandwidth, and will be applied in design of omnidirectional acoustic mirrors.展开更多
To guarantee secure communication against eavesdropping and malicious attack,an artificial noise(AN)-aided frequency-hopping(FH)architecture is adopted in this article.But the inevitable time misalignment between the ...To guarantee secure communication against eavesdropping and malicious attack,an artificial noise(AN)-aided frequency-hopping(FH)architecture is adopted in this article.But the inevitable time misalignment between the received signal and locally reconstructed AN will deteriorate the AN cancellation performance,yielding significant secrecy degradation at the FH receiver.In view of this,first,the AN cancellation performance under time misalignment is evaluated via signal to AN-plus-noise ratio,and the system secrecy is analyzed via secrecy rate.Then,to mitigate the performance degradation raised by time misalignment,the transmitting power allocation scheme for AN and confidential signal(CS)is optimized,and the optimal hopping period is designed.Notably,the obtained conclusions in both the performance evaluation and transmitter optimization sections hold no matter whether the eavesdropper can realize FH synchronization or not.Simulations verify that time misalignment will raise non-negligible performance degradation.Besides,the power ratio of AN to CS should decrease as time misalignment increases,and for perfect time synchronization,the transmitting power of AN and CS should be equivalent.In addition,a longer hopping period is preferred for secrecy enhancement when time misalignment gets exacerbated.展开更多
Properties of symmetrical layers as matching layers in multilayer thin film design were analyzed. A calculation method was presented to derive parameters of desired equivalent refractive index. A harmonic beam splitte...Properties of symmetrical layers as matching layers in multilayer thin film design were analyzed. A calculation method was presented to derive parameters of desired equivalent refractive index. A harmonic beam splitter was designed and fabricated to test this matching method. OCIS codes： 230.1360, 220.0220, 310.6860.展开更多
基金supported by the financial support from the National Natural Science Foundation of China(No.52172356)Hunan Provincial Natural Science Foundation of China(No.2022JJ10012)。
文摘Topology optimization stands as a pivotal technique in realizing periodic microstructure design.A novel approach is proposed,integrating the energy-based homogenization method with the Floating Projection Topology Optimization(FPTO)method to achieve smooth topology design.The objective is to optimize the periodic microstructure to maximize the properties of specific materials,such as bulk modulus and shear modulus,or to achieve negative Poisson's ratio.Linear material interpolation is used to eliminate the nonlinear challenges and design dependence caused by material penalty.Furthermore,the three-field density representation technique is applied to augment length scales and solid/void characteristics.Through systematic analysis and numerical simulations,the impacts of various initial designs and optimization parameters on the optimization outcomes are investigated.The results demonstrate that the optimized periodic microstructures exhibit extreme performance with clear boundaries.The identification of appropriate optimization parameters is crucial for enhancing the extreme mechanical properties of material microstructures.It can provide valuable guidance for aerospace component design involving material microstructures and metamaterials.
文摘It is a commonly asked question:how big should the longwall shields be? The answer is a key aspect of a longwall mining feasibility study when the consequences of inadequately rated shields are considered.This paper addresses this question based on the measured nature of the loading environment in which shields are required to operate,the various geological and geometrical controls of that environment and the various links between their load rating,a range of other relevant shield design factors and the loss event they are required to prevent a major roof collapse on the longwall face.The paper concludes that despite the tremendous advances that have been made in shield design and load rating over the past50 years,the same drivers that caused longwall miners of the past to seek improved roof control on the longwall face via the use of ever-higher rated shields,are still as relevant today.However at the current time,the limits of the largest available longwall shields have yet to be tested,therefore industry focus for the foreseeable future should possibly be in achieving the maximum level of roof control on the face via their optimum operational use rather than considering further shield rating increases and incurring the inevitable downsides in terms of capital cost and shield weight.
文摘According to the results of site seismic hazard analysis accomplished in the past decades, 96 site-related design spectra are selected as samples in this study. The result shows that the value of the corner period (T g) of the design spectrum in GBJ11-89 (China Seismic Building Code, issued in 1989) is lower than the value obtained by site seismic hazard analysis. The same situation exists when we compare the design spectra of the Codes to the spectra according to the earthquake records. The value in current seismic design code, GBJ50011-2001 issued in 2001, is greater than that in GBJ11-89, but still less than the value obtained by site seismic hazard analysis. If we accept the value got by site seismic hazard analysis, we have a suspicion that 2/3 of buildings built according to GBJ11-89 will not be safe when an earthquake with 2% probability of exceedance in 50 years occurs.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11304286,11274279 and 11174255the Scientific Research Fund of Zhejiang Provincial Education Department under Grant No Y201226257
文摘A new kind of one-dimensional multilayer phononie heterostructure is constructed to obtain a broad acoustic omnidirectional reflection （ODR） band. The heterostructure is formed by combining finite periodic phononic crystals （PnCs） and Fibonacci （or Thue-Morse） quasiperiodic PnCs. From the numerical results performed by the transfer matrix method, it is found that the ODR bands can be enlarged obviously by using the combination of periodic and quasi-periodic PnCs. Moreover, an application of particle swarm optimization in designing and optimizing acoustic ODR bands is reported. With regards to different thickness ratios and periodic numbers in the heterostructure, we give some optimization examples and finally achieve phononic heterostructure with a very broad ODR bandwidth. The result provides a new approach to achieve broad acoustic ODR bandwidth, and will be applied in design of omnidirectional acoustic mirrors.
基金supported in part by the National Natural Science Foundation of China under Grant 62071094in part by the National Key Laboratory of Wireless Communications Foundation under Grant IFN202402in part by the Postdoctoral Fellowship Program(Grade C)of China Postdoctoral Science Foundation under Grant GZC20240217.
文摘To guarantee secure communication against eavesdropping and malicious attack,an artificial noise(AN)-aided frequency-hopping(FH)architecture is adopted in this article.But the inevitable time misalignment between the received signal and locally reconstructed AN will deteriorate the AN cancellation performance,yielding significant secrecy degradation at the FH receiver.In view of this,first,the AN cancellation performance under time misalignment is evaluated via signal to AN-plus-noise ratio,and the system secrecy is analyzed via secrecy rate.Then,to mitigate the performance degradation raised by time misalignment,the transmitting power allocation scheme for AN and confidential signal(CS)is optimized,and the optimal hopping period is designed.Notably,the obtained conclusions in both the performance evaluation and transmitter optimization sections hold no matter whether the eavesdropper can realize FH synchronization or not.Simulations verify that time misalignment will raise non-negligible performance degradation.Besides,the power ratio of AN to CS should decrease as time misalignment increases,and for perfect time synchronization,the transmitting power of AN and CS should be equivalent.In addition,a longer hopping period is preferred for secrecy enhancement when time misalignment gets exacerbated.
文摘Properties of symmetrical layers as matching layers in multilayer thin film design were analyzed. A calculation method was presented to derive parameters of desired equivalent refractive index. A harmonic beam splitter was designed and fabricated to test this matching method. OCIS codes： 230.1360, 220.0220, 310.6860.
