This article provides an overview of the current development status of prestressed segmental precast and assembled piers,Emphasis was placed on analyzing the stress characteristics of bridge piers under impact.The con...This article provides an overview of the current development status of prestressed segmental precast and assembled piers,Emphasis was placed on analyzing the stress characteristics of bridge piers under impact.The concept of recoverable functional design and its application prospects were elaborated,and finally,the research on the impact resistance performance of prestressed segmental precast and assembled pierswas discussed.Research has shown that optimizing design and material selection can effectively enhance the impact resistance and structural durability of bridge piers.At the same time,the introduction of the concept of recoverable functionality provides new ideas for the rapid repair and functional recovery of bridge piers,which helps to improve the recovery efficiency of bridges after extreme events.Future research should focus on the evaluation methods of impact resistance performance,new connection technologies,in-depth application of recoverable functional design,a combination of impact simulation experiments and numerical analysis,and exploration of comprehensive disaster prevention and reduction strategies.These research results will also promote the further development and innovation of prefabricated assembly technology in bridge engineering,bringing new ideas and methods to the field of engineering construction.展开更多
It is known that fiber metal laminates （FML） as one of hybrid materials with thin metal sheets and fiber/epoxy layers have the characteristics of the excellent damage tolerance, fatigue and impact properties with a ...It is known that fiber metal laminates （FML） as one of hybrid materials with thin metal sheets and fiber/epoxy layers have the characteristics of the excellent damage tolerance, fatigue and impact properties with a relatively low density. Therefore, the mechanical components using FML can contribute the enhanced safety level of the sound construction toward the whole body. In this study, the impact performance of carbon reinforced aluminum laminates （CARAL） is investigated by experiments and numerical simulations. Drop weight tests are carried out with the weight of 4.7 kg at the speed of 1 and 2 m/s, respectively. Dynamic non-linear transient analyses are also accomplished using a finite element analysis software, ABAQUS. The experiment results and numerical results are compared with impact load-time histories. Also, energy-time histories are applied to investigate the impact performance of CARAL.展开更多
A glass fiber(GF)/polydicyclopentadiene(PDCPD)composite impact simulation model was established based on LS-DYNA(the finite element analysis software peroduced by Livermore Software Technology Corporation)simulation.A...A glass fiber(GF)/polydicyclopentadiene(PDCPD)composite impact simulation model was established based on LS-DYNA(the finite element analysis software peroduced by Livermore Software Technology Corporation)simulation.An optimal ply thickness of the composite GF/PDCPD was determined as 3.0 mm,and thus the final intrusion depth was controlled within 8.8 mm,meeting the performance standards for battery electric vehicle protection materials.A comparative analysis of failure modes during impacts was conducted for composites GF/PDCPD,GF/polypropylene(PP)and GF/polyamide(PA).The results indicated that GF/PDCPD exhibited compressive failure modes and ductile fractures,resulting in smaller damage areas.In contrast,GF/PP and GF/PA showed fiber fracture failures,leading to larger damage areas.The molding process and impact resistance of GF/PDCPD were investigated.By comparing the impact performance of GF/PDCPD with that of GF/PP and GF/PA,it was concluded that GF/PDCPD demonstrated superior performance and better alignment with the performance standards of battery electric vehicle protective materials.The predictability and accuracy of LS-DYNA simulation was verified,providing a theoretical foundation for further in-depth research.展开更多
Impact of band-engineering to the performance of charge trapping memory with HfO2/Ta2O5/HfO2 （HTH） as the charge trapping layer is investigated. Compared with devices with the same total HfO2 thickness, structures w...Impact of band-engineering to the performance of charge trapping memory with HfO2/Ta2O5/HfO2 （HTH） as the charge trapping layer is investigated. Compared with devices with the same total HfO2 thickness, structures with Ta2O5 closer to substrates show larger program/erase window, because the 2nd HfO2 （next to blocking oxide） serving as part of blocking oxide reduces the current tunneling out of/in the charge trapping layer during program and erase. Moreover, trapped charge centroid is modulated and contributed more to the fiat-band voltage shift. Further experiments prove that devices with a thicker 2nd HfO2 layer exhibit larger saturate fiat-band shift in both program and erase operation. The optimized device achieves a 7 V memory window and good reliability characteristics.展开更多
We evaluate the impact of temperature on the output behavior of a carbon nanotube field effect transistor （CNFET） based chaotic generator. The sources cause the variations in both current-voltage characteristics of ...We evaluate the impact of temperature on the output behavior of a carbon nanotube field effect transistor （CNFET） based chaotic generator. The sources cause the variations in both current-voltage characteristics of the CNFET device and an overall chaotic circuit is pointed out. To verify the effect of temperature variation on the output dynamics of the chaotic circuit, a simulation is performed by employing the CNFET compact model of Wong et al. in HSPICE with a temperature range from -100℃ to 100℃. The obtained results with time series, frequency spectra, and bifurcation diagram from the simulation demonstrate that temperature plays a significant role in the output dynamics of the CNFET-based chaotic circuit. Thus, temperature-related issues should be taken into account while designing a high-quality chaotic generator with high stability.展开更多
A YDC type hydraulic hammer is a new valve-type double action hydraulic hammer suitable for oil and gas well drilling.It is hard to find out the optimal matching relationship among various factors based on experience ...A YDC type hydraulic hammer is a new valve-type double action hydraulic hammer suitable for oil and gas well drilling.It is hard to find out the optimal matching relationship among various factors based on experience and experiments,for the matching relationships of inner pressure is complex and the impact performance is influenced by many factors.In this paper,the operating principle of a YDC type hydraulic hammer was investigated,the force applied to the main moving components(valve core and hammer)was analyzed and a dynamic model of valve core and hammer in each operating stage was established.Then,a hydraulic hammer performance optimization design software was developed on the Matlab software platform,and the performance parameters calculated by the software were compared with the laboratory test results.The following research results were obtained.Firstly,single impact energy,impact frequency and impact power increase with the increase of pump displacement or the decrease of flow bean diameter,and they increase firstly and then decrease with the increase of area difference between the upper and lower chambers.Secondly,with the increase of hammer weight,single impact energy and impact power increase,but the impact frequency decreases slowly.Thirdly,with the increase of hammer travel,single impact energy presents an increasing trend,impact frequency presents a decreasing trend and impact power basically remains unchanged.Fourthly,with the increase of valve core weight,single impact energy presents an increasing trend,while both impact frequency and impact power decrease.Fifthly,the parameter combination corresponding to the optimal single impact energy and impact power is A5B1C5D4E3F2,and the effect of displacement on single impact energy and impact power is the greatest.It is concluded that under the existing displacement and pressure of drilling pumps,the impact performance of the hydraulic hammer can be increased effectively by improving the structure of the hydraulic hammer and thus increasing its work displacement.展开更多
Arsenic can diffuse into high-κ dielectrics during OaAs-based metal oxide semiconductor transistor process, which causes the degradation of gate dielectrics. To explore the origins of the degradation, we employ nonlo...Arsenic can diffuse into high-κ dielectrics during OaAs-based metal oxide semiconductor transistor process, which causes the degradation of gate dielectrics. To explore the origins of the degradation, we employ nonlocal B3LYP hybrid functional to study arsenic related defects in ZrO2. Via band alignments between the OaAs and ZrO2, we are able to determine the defect formation energy in the GaAs relative to the ZrO2 band gap and assess how they will affect the device performance. Arsenic at the interstitial site serves as a source of positive fixed charge while at the oxygen or zirconium substitutional site changes its charge state within the band gap of GaAs. Moreover, it is found that arsenic related defects produce conduction band offset reduction and gap states, which will increase the gate leakage current.展开更多
Pneumatic down-the-hole (DTH) hammer has been extensively used in air drillings through hard and ultra-hard geological formations. Numerical modeling can offer close observation on the working behaviors by visualizing...Pneumatic down-the-hole (DTH) hammer has been extensively used in air drillings through hard and ultra-hard geological formations. Numerical modeling can offer close observation on the working behaviors by visualizing internal pressure status as well as provide reliable performance predictions for large-diameter DTH hammers to which conventional empirical and experimental approaches cannot be applied. In this study, CFD simulations coupled with dynamic meshing are utilized to simulate the air flow and piston movement inside the large-diameter DTH hammers. The numerical modeling scheme is verified against a theoretical model published in literature. Effects of structural parameters on hammer performance, including piston mass, piston upper-end diameter, piston groove diameter, and lengths of intake and exhaust stroke in both front and rear chambers, are analyzed in detail by virtue of sets of numerical simulations. The simulations suggest that changing the intake stroke of front chamber has a negligible influence on hammer performance while increasing the piston groove would lower all the four indicators of hammer performance, including impact energy, impact frequency, maximum stroke, and air consumption rate. Changing the other structural parameters demonstrates mixed effects on the performance indicators. Based on the numerical simulations, a large GQ-400 DTH hammer has been designed for reduced air consumption rate and tested in a field drilling practice. The air drilling test with the designed hammer provided a penetration rate 1.7 times faster than that of conventional mud drilling.展开更多
To explore the influence of double liquid quenching on the cutting performance of the 7A09 aluminum alloy,quasi-static compression and dynamic impact tests were carried out on the 7A09 aluminum alloy after double liqu...To explore the influence of double liquid quenching on the cutting performance of the 7A09 aluminum alloy,quasi-static compression and dynamic impact tests were carried out on the 7A09 aluminum alloy after double liquid quenching using an MTS810.23 universal testing machine and split-Hopkinson pressure bar(SHPB).The experimental data were fitted to obtain the Johnson–Cook constitutive model parameters of the alloy.Simulations of the machining process were carried out using the Deform-3D finite element software.The results showed that the rheological stress increased with the increase in strain rate and the decrease in temperature.The increase in the cutting speed and feed caused the cutting temperature to rise sharply,whereas the influence of the cutting amount on the cutting temperature was weak.Because of the presence of chip nodules,there was extremum in the cutting force vs cutting speed curves.The increase in the feed and cutting depth increased the cutting area Ac,so the cutting force also increased.The simulation results were verified by experiments.The simulation predictions were in good agreement with the test values,and the cutting force and temperature variations with the cutting parameters were the same.Thus,the correctness of the 7A09 aluminum alloy finite element model was verified.展开更多
Ⅰ.IntroductionDuring the past two decades,many multinationalenterprises(MNEs)have made substantial investmentsin emerging markets.Two factors dominate thereasoning in favor of such an investment strategy:lowlabor cos...Ⅰ.IntroductionDuring the past two decades,many multinationalenterprises(MNEs)have made substantial investmentsin emerging markets.Two factors dominate thereasoning in favor of such an investment strategy:lowlabor costs and the large size of the markets in the hostcountries.While these two economic factors seem quite展开更多
Data value prediction has been widely accepted as an effective mechanism to break data hazards for high performance processor design. Several works have reported promising performance potential. However, there is hard...Data value prediction has been widely accepted as an effective mechanism to break data hazards for high performance processor design. Several works have reported promising performance potential. However, there is hardly enough information that is presented in a clear way about performance comparison of these prediction mechanisms. This paper investigates the performance impact of four previously proposed value predictors, namely last value predictor, stride value predictor, two-level value predictor and hybrid （stride-t-two-level） predictor. The impact of misprediction penalty, which has been frequently ignored, is discussed in detail. Several other implementation issues, including instruction window size, issue width and branch predictor are also addressed and simulated. Simulation results indicate that data value predictors act differently under different configurations. In some cases, simpler schemes may be more beneficial than complicated ones. In some particular cases, value prediction may have negative impact on performance.展开更多
基金supported by the Zhejiang Provincial Natural Science Foundation of China under Grant No.LTGG23E080001Scientific Research Foundation of Hangzhou City University under Grant Nos.X-202107 and X-202109Zhejiang Engineering Research Center of Intelligent Urban Infrastructure under Grant No.IUI2023-ZD-14.
文摘This article provides an overview of the current development status of prestressed segmental precast and assembled piers,Emphasis was placed on analyzing the stress characteristics of bridge piers under impact.The concept of recoverable functional design and its application prospects were elaborated,and finally,the research on the impact resistance performance of prestressed segmental precast and assembled pierswas discussed.Research has shown that optimizing design and material selection can effectively enhance the impact resistance and structural durability of bridge piers.At the same time,the introduction of the concept of recoverable functionality provides new ideas for the rapid repair and functional recovery of bridge piers,which helps to improve the recovery efficiency of bridges after extreme events.Future research should focus on the evaluation methods of impact resistance performance,new connection technologies,in-depth application of recoverable functional design,a combination of impact simulation experiments and numerical analysis,and exploration of comprehensive disaster prevention and reduction strategies.These research results will also promote the further development and innovation of prefabricated assembly technology in bridge engineering,bringing new ideas and methods to the field of engineering construction.
基金supported by a grant-in-aid for the Na-tional Core Research Center Program from the Ministry of Education Science & Technology and the Korea Science & Engineering Foundation (No. R15-2006-022-01001-0)support by the Korea Science and Engineering Foundation (KOSEF) NRL Program grant funded by the Korea government (MEST) (No. R0A-2008-000-20017-0)
文摘It is known that fiber metal laminates （FML） as one of hybrid materials with thin metal sheets and fiber/epoxy layers have the characteristics of the excellent damage tolerance, fatigue and impact properties with a relatively low density. Therefore, the mechanical components using FML can contribute the enhanced safety level of the sound construction toward the whole body. In this study, the impact performance of carbon reinforced aluminum laminates （CARAL） is investigated by experiments and numerical simulations. Drop weight tests are carried out with the weight of 4.7 kg at the speed of 1 and 2 m/s, respectively. Dynamic non-linear transient analyses are also accomplished using a finite element analysis software, ABAQUS. The experiment results and numerical results are compared with impact load-time histories. Also, energy-time histories are applied to investigate the impact performance of CARAL.
文摘A glass fiber(GF)/polydicyclopentadiene(PDCPD)composite impact simulation model was established based on LS-DYNA(the finite element analysis software peroduced by Livermore Software Technology Corporation)simulation.An optimal ply thickness of the composite GF/PDCPD was determined as 3.0 mm,and thus the final intrusion depth was controlled within 8.8 mm,meeting the performance standards for battery electric vehicle protection materials.A comparative analysis of failure modes during impacts was conducted for composites GF/PDCPD,GF/polypropylene(PP)and GF/polyamide(PA).The results indicated that GF/PDCPD exhibited compressive failure modes and ductile fractures,resulting in smaller damage areas.In contrast,GF/PP and GF/PA showed fiber fracture failures,leading to larger damage areas.The molding process and impact resistance of GF/PDCPD were investigated.By comparing the impact performance of GF/PDCPD with that of GF/PP and GF/PA,it was concluded that GF/PDCPD demonstrated superior performance and better alignment with the performance standards of battery electric vehicle protective materials.The predictability and accuracy of LS-DYNA simulation was verified,providing a theoretical foundation for further in-depth research.
基金Supported by the National Basic Research Program of China under Grant No 2011CBA00602the National Key Scientific and Technological Project under Grant No 2013ZX01032001-001-003
文摘Impact of band-engineering to the performance of charge trapping memory with HfO2/Ta2O5/HfO2 （HTH） as the charge trapping layer is investigated. Compared with devices with the same total HfO2 thickness, structures with Ta2O5 closer to substrates show larger program/erase window, because the 2nd HfO2 （next to blocking oxide） serving as part of blocking oxide reduces the current tunneling out of/in the charge trapping layer during program and erase. Moreover, trapped charge centroid is modulated and contributed more to the fiat-band voltage shift. Further experiments prove that devices with a thicker 2nd HfO2 layer exhibit larger saturate fiat-band shift in both program and erase operation. The optimized device achieves a 7 V memory window and good reliability characteristics.
基金Supported by the Basic Science Research Program through the National Research Foundation of Korea Funded by the Ministry of Education,Science and Technology under Grant No 2012-0002777
文摘We evaluate the impact of temperature on the output behavior of a carbon nanotube field effect transistor （CNFET） based chaotic generator. The sources cause the variations in both current-voltage characteristics of the CNFET device and an overall chaotic circuit is pointed out. To verify the effect of temperature variation on the output dynamics of the chaotic circuit, a simulation is performed by employing the CNFET compact model of Wong et al. in HSPICE with a temperature range from -100℃ to 100℃. The obtained results with time series, frequency spectra, and bifurcation diagram from the simulation demonstrate that temperature plays a significant role in the output dynamics of the CNFET-based chaotic circuit. Thus, temperature-related issues should be taken into account while designing a high-quality chaotic generator with high stability.
基金supported by CNPC Scientific Research and Technology Development Project“Study on New Drilling Techniques and Methods”(No.2014A-4211).
文摘A YDC type hydraulic hammer is a new valve-type double action hydraulic hammer suitable for oil and gas well drilling.It is hard to find out the optimal matching relationship among various factors based on experience and experiments,for the matching relationships of inner pressure is complex and the impact performance is influenced by many factors.In this paper,the operating principle of a YDC type hydraulic hammer was investigated,the force applied to the main moving components(valve core and hammer)was analyzed and a dynamic model of valve core and hammer in each operating stage was established.Then,a hydraulic hammer performance optimization design software was developed on the Matlab software platform,and the performance parameters calculated by the software were compared with the laboratory test results.The following research results were obtained.Firstly,single impact energy,impact frequency and impact power increase with the increase of pump displacement or the decrease of flow bean diameter,and they increase firstly and then decrease with the increase of area difference between the upper and lower chambers.Secondly,with the increase of hammer weight,single impact energy and impact power increase,but the impact frequency decreases slowly.Thirdly,with the increase of hammer travel,single impact energy presents an increasing trend,impact frequency presents a decreasing trend and impact power basically remains unchanged.Fourthly,with the increase of valve core weight,single impact energy presents an increasing trend,while both impact frequency and impact power decrease.Fifthly,the parameter combination corresponding to the optimal single impact energy and impact power is A5B1C5D4E3F2,and the effect of displacement on single impact energy and impact power is the greatest.It is concluded that under the existing displacement and pressure of drilling pumps,the impact performance of the hydraulic hammer can be increased effectively by improving the structure of the hydraulic hammer and thus increasing its work displacement.
基金Supported by the Key Project of Education Department of China under Grant No 211035the Science Foundation from Education Department of Liaoning Province under Grant No L2014445
文摘Arsenic can diffuse into high-κ dielectrics during OaAs-based metal oxide semiconductor transistor process, which causes the degradation of gate dielectrics. To explore the origins of the degradation, we employ nonlocal B3LYP hybrid functional to study arsenic related defects in ZrO2. Via band alignments between the OaAs and ZrO2, we are able to determine the defect formation energy in the GaAs relative to the ZrO2 band gap and assess how they will affect the device performance. Arsenic at the interstitial site serves as a source of positive fixed charge while at the oxygen or zirconium substitutional site changes its charge state within the band gap of GaAs. Moreover, it is found that arsenic related defects produce conduction band offset reduction and gap states, which will increase the gate leakage current.
基金This work was supported by the Natural Science Foundation of Jilin Province(YDZj202101ZYTS143)National Key Research and Development Project of China(project No.2018YFC1505303).
文摘Pneumatic down-the-hole (DTH) hammer has been extensively used in air drillings through hard and ultra-hard geological formations. Numerical modeling can offer close observation on the working behaviors by visualizing internal pressure status as well as provide reliable performance predictions for large-diameter DTH hammers to which conventional empirical and experimental approaches cannot be applied. In this study, CFD simulations coupled with dynamic meshing are utilized to simulate the air flow and piston movement inside the large-diameter DTH hammers. The numerical modeling scheme is verified against a theoretical model published in literature. Effects of structural parameters on hammer performance, including piston mass, piston upper-end diameter, piston groove diameter, and lengths of intake and exhaust stroke in both front and rear chambers, are analyzed in detail by virtue of sets of numerical simulations. The simulations suggest that changing the intake stroke of front chamber has a negligible influence on hammer performance while increasing the piston groove would lower all the four indicators of hammer performance, including impact energy, impact frequency, maximum stroke, and air consumption rate. Changing the other structural parameters demonstrates mixed effects on the performance indicators. Based on the numerical simulations, a large GQ-400 DTH hammer has been designed for reduced air consumption rate and tested in a field drilling practice. The air drilling test with the designed hammer provided a penetration rate 1.7 times faster than that of conventional mud drilling.
基金Projects(51575289,51705270)supported by the National Natural Science Foundation of ChinaProject(2019GHY112068)supported by the Key Research and Development of Shandong,China
文摘To explore the influence of double liquid quenching on the cutting performance of the 7A09 aluminum alloy,quasi-static compression and dynamic impact tests were carried out on the 7A09 aluminum alloy after double liquid quenching using an MTS810.23 universal testing machine and split-Hopkinson pressure bar(SHPB).The experimental data were fitted to obtain the Johnson–Cook constitutive model parameters of the alloy.Simulations of the machining process were carried out using the Deform-3D finite element software.The results showed that the rheological stress increased with the increase in strain rate and the decrease in temperature.The increase in the cutting speed and feed caused the cutting temperature to rise sharply,whereas the influence of the cutting amount on the cutting temperature was weak.Because of the presence of chip nodules,there was extremum in the cutting force vs cutting speed curves.The increase in the feed and cutting depth increased the cutting area Ac,so the cutting force also increased.The simulation results were verified by experiments.The simulation predictions were in good agreement with the test values,and the cutting force and temperature variations with the cutting parameters were the same.Thus,the correctness of the 7A09 aluminum alloy finite element model was verified.
文摘Ⅰ.IntroductionDuring the past two decades,many multinationalenterprises(MNEs)have made substantial investmentsin emerging markets.Two factors dominate thereasoning in favor of such an investment strategy:lowlabor costs and the large size of the markets in the hostcountries.While these two economic factors seem quite
文摘Data value prediction has been widely accepted as an effective mechanism to break data hazards for high performance processor design. Several works have reported promising performance potential. However, there is hardly enough information that is presented in a clear way about performance comparison of these prediction mechanisms. This paper investigates the performance impact of four previously proposed value predictors, namely last value predictor, stride value predictor, two-level value predictor and hybrid （stride-t-two-level） predictor. The impact of misprediction penalty, which has been frequently ignored, is discussed in detail. Several other implementation issues, including instruction window size, issue width and branch predictor are also addressed and simulated. Simulation results indicate that data value predictors act differently under different configurations. In some cases, simpler schemes may be more beneficial than complicated ones. In some particular cases, value prediction may have negative impact on performance.
