Through the initial selection,screening and simplification,a set of performance appraisal system of logistic distribution suited to fresh agricultural products is established.In the process of establishing the apprais...Through the initial selection,screening and simplification,a set of performance appraisal system of logistic distribution suited to fresh agricultural products is established.In the process of establishing the appraisal indicator,the representative appraisal indicator of logistic distribution of fresh agricultural products is further obtained by delivering experts'survey and applying the ABC screening system.The distribution costs,transportation and service level belong to the first level indicator;packing fees,distribution processing fees,full-load ratio,haulage capacity,customer satisfaction and the strain capability of delivery personnel belong to second level indicator.At the same time,the weighing of each indicator is determined.The quantification is conducted on indicators.The qualitative indicators applies ten-point system and then coverts these indicators into percentage,that is the number between[0,1];as for the quantitative indicators,they are concluded to the interval[0,1]according to the actual value range of the indicators and by applying the grade of membership in the vague mathematics.Through the analyses of the advantages and disadvantages of the frequently used performance evaluation method and its applicable conditions,the comprehensive evaluation of logistic distribution of agricultural products obtained by using the method of fuzzy comprehensive appraisal.The results show that,in terms of reducing distribution costs,the packaging and distribution processing technology of fresh agricultural products should be improved,so as to reduce distribution costs.In the process of introducing the application of advanced technology,the high automatic logistic equipments should be introduced.展开更多
Bi/Bi_(2)Fe_(4)O_(9)nanocomposites consisting of Bi_(2)Fe_(4)O_(9)nanosheets decorated with Bi nanodots were synthesized by a hydrothermal method.The formation of Bi nanodots on the Bi_(2)Fe_(4)O_(9)nanosheet surfaces...Bi/Bi_(2)Fe_(4)O_(9)nanocomposites consisting of Bi_(2)Fe_(4)O_(9)nanosheets decorated with Bi nanodots were synthesized by a hydrothermal method.The formation of Bi nanodots on the Bi_(2)Fe_(4)O_(9)nanosheet surfaces was attributed to the reducibility of 2-methoxyethanol in the precursor solution.Comparative photocatalytic evaluation reveals that the Bi/Bi_(2)Fe_(4)O_(9)nanocomposites significantly enhance the degradation efficiency(99.0%)of bisphenol A compared with Bi_(2)Fe_(4)O_(9)nanosheets(64.2%)under 120 min simulated solar irradiation.This remarkable enhancement can be attributed to the established Bi/Bi_(2)Fe_(4)O_(9)heterojunction structure,which effectively facilitates the separation of photogenerated electron-hole pairs and accelerates interfacial charge transfer between the metallic Bi nanodots and semiconductor Bi_(2)Fe_(4)O_(9)nanosheets.The synergistic effects arising from this unique architecture ultimately lead to superior photocatalytic performance.展开更多
To study the influence of silicon(Si)on 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20),NC/CL-20 composite explosives and Si/NC/CL-20 composite explosives were prepared by the electrostatic spraying ...To study the influence of silicon(Si)on 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20),NC/CL-20 composite explosives and Si/NC/CL-20 composite explosives were prepared by the electrostatic spraying method.The morphology,structure and thermal decomposition properties of the samples were analyzed using scanning electron microscopy(SEM),X-ray energy spectroscopy(EDS),infrared spectroscopy(FT-IR),and simultaneous thermal analyzer(TG-DSC).Additionally,the combustion process of the samples was tested using a high-speed camera.The results show that the addition of nano-Si contributes to the formation of composite explosives with regular morphology and smaller particle size.The Si/NC/CL-20 composite explosive has better and more uniform sphericity,with an average particle size of 73.4 nm,compared to the NC/CL-20 composite explosive.The Si/NC/CL-20 composite explosive which produced by the electrostatic spraying method,achieves physically uniform distribution of the components including NC,CL-20,Si.The addition of Si promotes the thermal decomposition of CL-20.In comparison to the NC/CL-20 composite explosive,the activation energy of the Si/NC/CL-20 composite explosive decreases by 16.78 kJ/mol,and the self-accelerated decomposition temperature and the critical temperature of thermal explosion decreases by 3.12 K and 2.61 K,respectively.Furthermore,Si/NC/CL-20 composite explosive has shorter ignition delay time and faster combustion rate compared to the NC/CL-20 composite explosive,which shows that Si can improve the combustion performance of CL-20.展开更多
Public institutions constitute a vital component of China’s public service system,playing a significant functional role in the nation’s social development and construction.Human resource(HR)management is a vital com...Public institutions constitute a vital component of China’s public service system,playing a significant functional role in the nation’s social development and construction.Human resource(HR)management is a vital component of internal administration within these institutions.The integration of performance appraisal is crucial for enhancing the effectiveness of HR management and facilitating the smooth operation of all institutional functions.Based on this premise,this article first briefly outlines the value of applying performance appraisal in the HR management of public institutions.It then explores strategies for implementing performance appraisal within this context,aiming to provide insights for promoting the sustained and healthy development of public institutions.展开更多
During the final proofing stage of the paper,the wrong version of Fig.2 was accidently used when replacing it with a high-resolution version.The star and circle marks were missing in the published version.
Nano-scale CuF_(2) with superior electrochemical activity was successfully prepared by a mixed solvent co-precipitation method.The SEM and TEM analyses demonstrated that the methanol concentration had a pronounced eff...Nano-scale CuF_(2) with superior electrochemical activity was successfully prepared by a mixed solvent co-precipitation method.The SEM and TEM analyses demonstrated that the methanol concentration had a pronounced effect on both the particle size and the extent of agglomeration.With the increase in methanol content,the particle size and agglomeration of CuF_(2) decreased first and then increased.When the volume ratio of methanol to deionized water was 1:1,the CuF_(2) particles exhibited the smallest size and the lowest degree of agglomeration.CuF_(2) synthesized with 50%methanol exhibited superior electrochemical performances with a voltage plateau above 3 V and a 1st discharge capacity of 525.8 mAh·g^(-1) at 0.01 C due to the synergistic influence of the particle size and dispersion.The analysis results using electrochemical impedance spectroscopy(EIS)and constant current intermittent titration technique(GITT)affirmed the addition of methanol was beneficial for promoting Li+diffusion and accelerating electrochemical reaction kinetics of CuF_(2).展开更多
Sponge city(SPC)is proposed to solve the issues such as the degradation of urban water ecosystem environment,imbalanced water resource allocation,urban water logging,and water contamination.The PPP(Public Private Part...Sponge city(SPC)is proposed to solve the issues such as the degradation of urban water ecosystem environment,imbalanced water resource allocation,urban water logging,and water contamination.The PPP(Public Private Partnership)model is combined to release the government pressure of SPC project construction.The development of the SPC-PPP model makes significant contributions to the sustainable development and the enhancement of urban resilience against water-related disasters.However,there is no scientific performance evaluation system on its operation period has been conducted.Therefore,the SPC-PPP Evaluation model aims to objectively and reasonably assess project effectiveness,promote its development and refine the evaluation framework.This paper has set up the MEE model for performance evaluation,with improved Matter-Element Extension method to assign values to the evaluation indices.The research results show that:(1)The MEE model is more accurate in the performance evaluation and its effectiveness is reflected in its ability to capture the correlation among different indices in the same membership,rather than merely focusing on individual indices.(2)The proposed approach provided a new aspect for performance evaluation,improving the accuracy of evaluation and promoting the development of SPC-PPP project.展开更多
As a key sector in advancing China’s“carbon neutrality”goal,the machinery manufacturing industry has achieved remarkable development in recent years.Against this backdrop,the scientific and objective evaluation of ...As a key sector in advancing China’s“carbon neutrality”goal,the machinery manufacturing industry has achieved remarkable development in recent years.Against this backdrop,the scientific and objective evaluation of the financial performance of machinery manufacturing enterprises has become a pressing issue in financial research.This topic is not only crucial for optimizing enterprise management and improving operational efficiency but also essential for enhancing overall industry performance and promoting sustainable development.This paper first introduces the concept of financial performance,followed by an analysis of related financial performance evaluation theories.It then focuses on the application of the entropy method in evaluating the financial performance of machinery manufacturing enterprises,detailing its analytical steps.Finally,a financial performance evaluation index system is constructed based on four dimensions:profitability,solvency,operational efficiency,and growth potential.展开更多
The development of high-performance transition metal sulfide(TMS)/carbon composites to replace conventional graphite anode remains a critical challenge for advancing lithium-ion batteries(LIBs).In this study,a facile ...The development of high-performance transition metal sulfide(TMS)/carbon composites to replace conventional graphite anode remains a critical challenge for advancing lithium-ion batteries(LIBs).In this study,a facile self-sacrifice template method is developed to prepare FeS encapsulated into N,S co-doped carbon(FeS/NSC)composite using melamine-cyanuric acid(MCA)supermolecule as a multifunctional template precursor.The function of MCA supermolecule for material synthesis is explored,revealing its special function as a dispersant,dopant and pore-forming agent.Furthermore,the effect of Fe source dosage on the morphology,structure and composition of the final products is explored.The resultant FeS/NSC-0.1(where 0.1 represents the mass of added Fe source)exhibits the most optimal proportion,characterized by a good dispersion status of FeS within the NSC matrix,effective N,S co-doping and ample porosity.Benefiting from these merits,the FeS/NSC-0.1 anode demonstrates significantly improved cycling stability and rate capability when compared to the counterparts.Undoubtedly,this work offers a universal method to produce advanced transition metal sulfide/carbon composite electrodes for energy storage and conversion systems.展开更多
Aerodynamic performances of axial compressors are significantly affected by variation of Reynolds number in aero-engines.In the design and analysis of compressors,previous correction methods for cascades and stages ha...Aerodynamic performances of axial compressors are significantly affected by variation of Reynolds number in aero-engines.In the design and analysis of compressors,previous correction methods for cascades and stages have difficulties in predicting comprehensively Reynolds number effects on airfoils,matching and characteristics curves.This study proposes Re-correction models for loss,deviation angle and endwall blockage based on classical theories and cascade tests,and loss and deviation models show good agreement in test data of NACA65 and C4 cascades.Throughflow method considering Reynolds number effects is developed by integrating the correction models into a verified Streamline Curvature(SLC)tool.A three-stage axial compressor is investigated through SLC and CFD methods from design Reynolds number(Red=2106)to low Re=4104,and the numerical methods are validated with test data of characteristic curves and spanwise distributions at Red.With Re reduction,SLC method with correction models well predicts variation in overall performances compared with CFD calculations and Wassell's model.Streamwise and spanwise matching such as total pressure and loss distributions in SLC predictions are basically consistent with those in CFD results at near-stall points under design and low Reynolds numbers.SLC and CFD methods share similar detections of stall risks in the third stage(Stg3),and their analyses of diffusion processes deviate to some extent due to different predictions in separated endwall flow.The correction models can be adopted to consider Reynolds number effects in through-flow design and analysis of axial compressors.展开更多
This paper first introduces the overview of real estate appraisal theory,the basic situation of real estate appraisal,the basic principles and characteristics of real estate appraisal,and three main appraisal methods....This paper first introduces the overview of real estate appraisal theory,the basic situation of real estate appraisal,the basic principles and characteristics of real estate appraisal,and three main appraisal methods.On this basis,the specific use scope of each method,the meaning of each parameter,and the influencing factors are analyzed.Then,based on the in-depth study of various existing appraisal theories and methods,a new appraisal method is proposed:the appraisal analysis method based on fuzzy analytic hierarchy process.展开更多
To relieve dust pollution in open cut coal mines and reduce the hazards of coal dust pollution to the environment and workers we optimized the synthesis of a dust suppressant by graft copolymerization of environmental...To relieve dust pollution in open cut coal mines and reduce the hazards of coal dust pollution to the environment and workers we optimized the synthesis of a dust suppressant by graft copolymerization of environmentally friendly soy protein isolate with methyl methacrylate.This dust suppressant could effectively control dust pollution in open cut coal mines. The optimized conditions for graft copolymerization in this case were determined by a response surface experiment designed with Design-Expert 10 software. Characterization by scanning electron microscopy showed a significant morphology change of the dust suppressant and the generation of a rigid and dense layer on its surface after interacting with coal dust.The layer exhibited good bonding and dust suppression performance. The analysis with Fourier-transform infrared spectroscopy revealed the appearance of new absorption peaks near 1300, 1072, and 1631 cm, demonstrating effective graft copolymerization. The proposed dust suppressant exhibited excellent wind erosion resistance, with a resistance that exceeded 90% at a wind speed of 6.5 m/sec. The successful graft copolymerization and effective bonding and curing of the dust suppressant on coal dust were experimentally verified.This is of great significance to the control of coal dust pollution.展开更多
Dielectric elastomer actuator （DEA） show promise for mechatronic applications due to the advantages of dielectric elastomer, such as lightweight, flexible, low cost, high strain, etc, and many configurations of DEAs...Dielectric elastomer actuator （DEA） show promise for mechatronic applications due to the advantages of dielectric elastomer, such as lightweight, flexible, low cost, high strain, etc, and many configurations of DEAs have been demonstrated. As a kind of linear actuator, cone DEAs are studied in some laboratory prototypes due to easy manufacturing, however, their performance have not been exploited fully. Based on the working principle of DEA, a four-bar linkage mechanism is designed to provide negative stiffness preload, which can increase displacement output of actuator （outer diameter 100 mm） to 17 mm. Three cone actuating units are assembled in parallel to enhance the maximum force output to 5.07 N. Loading experiments of actuator in forward and backward strokes are performed, the experimental results show that backward stroke has stronger actuating capability than forward stroke, accordingly application of actuator is recommended. Four factors rather than applied voltage, i.e., number of actuating units, pre-stretch ratio, inner diameter, and outer diameter, are determined as influencing factors for Taguchi method. Then the performance objectives of actuator, i.e., displacement output, maximum force output, and maximum work in backward stroke, are investigated based on L9（34） Taguchi orthogonal design. The mean signal-to-noise （S/N） ratio based on the larger-the-better criterion is calculated according to the acquired displacement and force output. Analytical results show that outer diameter has the most significant influence on displacement output, and maximum force out and work output are influenced most by number of actuating units. Inner diameter also has an important effect on the performance objectives of actuator, while pre-stretch ratio has the least influence. The proposed performance investigation is helpful for the design and application of cone actuator in mechatronic system.展开更多
The nickel-based catalysts were prepared by the sol-gel method and used for the CH4 reforming with CO2. The effects of the sol-gel method on the specific surface area, catalytic activity, desorption, and reduction per...The nickel-based catalysts were prepared by the sol-gel method and used for the CH4 reforming with CO2. The effects of the sol-gel method on the specific surface area, catalytic activity, desorption, and reduction performances of catalysts were investigated with BET, TPR, and TPD. Compared with the catalyst prepared by the impregnation method, the results indicated that the catalysts prepared by the sol-gel method had larger specific surface area, showing higher catalytic activities and exhibiting perfect desorption and reduction performances. In addition, the modification effects of adding La were studied, and it was found that the 0.75NLBT catalyst constituted of 5wt.%Ni-0.75wt.%La was optimal.展开更多
With the consideration of volume constraint of launch vehicle and trafficability of rover vehicle on lunar regolith terrain,a new design of radially deployable wheel is presented.For the purpose of achieving the meso-...With the consideration of volume constraint of launch vehicle and trafficability of rover vehicle on lunar regolith terrain,a new design of radially deployable wheel is presented.For the purpose of achieving the meso-mechanics and dynamical behavior of lunar soil particles as well as macro-parameters of tractive performance for radially deployable wheel,the interaction between two types of wheel configurations and lunar soil particles is analyzed by means of discrete element method.The network of contact forces,the displacement vector chart,and the deformation of lunar soil beneath wheels are plotted.The equations of soil thrust,motion resistance,drawbar pull and driven torque are derived in granular scale based on the coordinates transformation and algebraic summation.The calculated results show that there is sufficient traction for both 6-split and 12-split radially deployable wheels with 304 mm outspread diameter to negotiate lunar regolith terrain specified here;the value of drawbar pull enhances with the increase of split number of radially deployable wheel,however,the required driven torque increases simultaneously,therefore,the tractive efficiency decreases.展开更多
The alternative working modes and flexible working states are the outstanding features of an adaptive cycle engine, with a proper control schedule design being the only way to exploit the performance of such an engine...The alternative working modes and flexible working states are the outstanding features of an adaptive cycle engine, with a proper control schedule design being the only way to exploit the performance of such an engine. However, unreasonable design in the control schedule causes not only performance deterioration but also serious aerodynamic stability problems. Thus, in this work,a hybrid optimization method that automatically chooses the working modes and identifies the optimal and smooth control schedules is proposed, by combining the differential evolution algorithm and the Latin hypercube sampling method. The control schedule architecture does not only optimize the engine steady-state performance under different working modes but also solves the control-schedule discontinuity problem, especially during mode transition. The optimal control schedules are continuous and almost monotonic, and hence are strongly suitable for a control system, and are designed for two different working conditions, i.e., supersonic and subsonic throttling,which proves that the proposed hybrid method applies to various working conditions. The evaluation demonstrates that the proposed control method optimizes the engine performance, the surge margin of the compression components, and the range of the thrust during throttling.展开更多
A new numerical method was developed for predicting the steady hydrodynamic performance of ducted propellers. A potential based surface panel method was applied both to the duct and the propeller, and the interaction ...A new numerical method was developed for predicting the steady hydrodynamic performance of ducted propellers. A potential based surface panel method was applied both to the duct and the propeller, and the interaction between them was solved by an induced velocity potential iterative method. Compared with the induced velocity iterative method, the method presented can save programming and calculating time. Numerical results for a JD simplified ducted propeller series showed that the method presented is effective for predicting the steady hydrodynamic performance of ducted propellers.展开更多
The wear behavior of AZ91 alloy was investigated by considering different parameters,such as load(10−50 N),sliding speed(160−220 mm/s)and sliding distance(250−1000 m).It was found that wear volume loss increased as lo...The wear behavior of AZ91 alloy was investigated by considering different parameters,such as load(10−50 N),sliding speed(160−220 mm/s)and sliding distance(250−1000 m).It was found that wear volume loss increased as load increased for all sliding distances and some sliding speeds.For sliding speed of 220 mm/s and sliding distance of 1000 m,the wear volume losses under loads of 10,20,30,40 and 50 N were calculated to be 15.0,19.0,24.3,33.9 and 37.4 mm3,respectively.Worn surfaces show that abrasion and oxidation were present at a load of 10 N,which changes into delamination at a load of 50 N.ANOVA results show that the contributions of load,sliding distance and sliding speed were 12.99%,83.04%and 3.97%,respectively.The artificial neural networks(ANN),support vector regressor(SVR)and random forest(RF)methods were applied for the prediction of wear volume loss of AZ91 alloy.The correlation coefficient(R2)values of SVR,RF and ANN for the test were 0.9245,0.9800 and 0.9845,respectively.Thus,the ANN model has promising results for the prediction of wear performance of AZ91 alloy.展开更多
In this work,NiMo catalysts with various contents of MoO_(3)were prepared through incipient wetness impregnation by a twostep method(NMxA)and onepot method(NMxB).The catalysts were then characterized by XRD,XPS,NH3TPD...In this work,NiMo catalysts with various contents of MoO_(3)were prepared through incipient wetness impregnation by a twostep method(NMxA)and onepot method(NMxB).The catalysts were then characterized by XRD,XPS,NH3TPD,H_(2)TPR,HRTEM,and N_(2)adsorptiondesorption technologies.The performance of the NiMo/Al_(2)O_(3) catalysts was investigated by hydrocracking lowtemperature coal tar.When the MoO3 content was 15 wt%,the interaction between Ni species and Al_(2)O_(3) on the NM15B catalyst was stronger than that on the NM15A catalyst,resulting in the poor performance of the former.When the MoO^(3) content was 20 wt%,MoO_(3) agglomerated on the surface of the NM20A catalyst,leading to decreased number of active sites and specific surface area and reduced catalytic performance.The increase in the number of MoS_(2) stack layers strengthened the interaction between Ni and Mo species of the NM20B catalyst and consequently improved its catalytic performance.When the MoO_(3) content reached 25 wt%,the active metals agglomerated on the surface of the NiMo catalysts,thereby directly decreasing the number of active sites.In conclusion,the twostep method is suitable for preparing catalysts with large pore diameter and low MoO_(3) content loading,and the onepot method is more appropriate for preparing catalysts with large specific surface area and high MoO_(3) content.Moreover,the NMxA catalysts had larger average pore diameter than the NMxB catalysts and exhibited improved desulfurization performance.展开更多
In order to comprehensively utilize the remaining bamboo residue of bamboo products,this paper presents a research on recycling the bamboo fibers from bamboo residue for improving the performance of the asphalt mixtur...In order to comprehensively utilize the remaining bamboo residue of bamboo products,this paper presents a research on recycling the bamboo fibers from bamboo residue for improving the performance of the asphalt mixtures.First of all,the basic performance parameters of sinocalamus affinis fiber,phyllostachys pubescens fiber,green bamboo fiber were tested and analyzed,and the optimal content and length were put forward.Then,the mix ratio design of the bamboo fiber modified asphalt mixture was further designed through the response surface method,and was verified the rationality of the mix ratio.Finally,the mixture specimens were made according to the experimental design mix ratio,and the high temperature,low temperature performance and moisture susceptibility of the bamboo fiber modified mixtures asphalt were tested.The results showed that the high temperature performance,low temperature performance and moisture susceptibility of bamboo fiber modified asphalt mixtures were improved compared with the performance of SBS modified asphalt mixture.When the length of bamboo fiber is 7.25 mm and the content of 0.22%,the road performance of the asphalt mixture was optimal.Consequentially,the decomposition of bamboo residue into bamboo fiber and its application in asphalt pavement can improve the reuse of bamboo waste,with remarkable environmental benefits and great promotion value.展开更多
文摘Through the initial selection,screening and simplification,a set of performance appraisal system of logistic distribution suited to fresh agricultural products is established.In the process of establishing the appraisal indicator,the representative appraisal indicator of logistic distribution of fresh agricultural products is further obtained by delivering experts'survey and applying the ABC screening system.The distribution costs,transportation and service level belong to the first level indicator;packing fees,distribution processing fees,full-load ratio,haulage capacity,customer satisfaction and the strain capability of delivery personnel belong to second level indicator.At the same time,the weighing of each indicator is determined.The quantification is conducted on indicators.The qualitative indicators applies ten-point system and then coverts these indicators into percentage,that is the number between[0,1];as for the quantitative indicators,they are concluded to the interval[0,1]according to the actual value range of the indicators and by applying the grade of membership in the vague mathematics.Through the analyses of the advantages and disadvantages of the frequently used performance evaluation method and its applicable conditions,the comprehensive evaluation of logistic distribution of agricultural products obtained by using the method of fuzzy comprehensive appraisal.The results show that,in terms of reducing distribution costs,the packaging and distribution processing technology of fresh agricultural products should be improved,so as to reduce distribution costs.In the process of introducing the application of advanced technology,the high automatic logistic equipments should be introduced.
基金Funded by the National Natural Science Foundation of China(No.50902108)。
文摘Bi/Bi_(2)Fe_(4)O_(9)nanocomposites consisting of Bi_(2)Fe_(4)O_(9)nanosheets decorated with Bi nanodots were synthesized by a hydrothermal method.The formation of Bi nanodots on the Bi_(2)Fe_(4)O_(9)nanosheet surfaces was attributed to the reducibility of 2-methoxyethanol in the precursor solution.Comparative photocatalytic evaluation reveals that the Bi/Bi_(2)Fe_(4)O_(9)nanocomposites significantly enhance the degradation efficiency(99.0%)of bisphenol A compared with Bi_(2)Fe_(4)O_(9)nanosheets(64.2%)under 120 min simulated solar irradiation.This remarkable enhancement can be attributed to the established Bi/Bi_(2)Fe_(4)O_(9)heterojunction structure,which effectively facilitates the separation of photogenerated electron-hole pairs and accelerates interfacial charge transfer between the metallic Bi nanodots and semiconductor Bi_(2)Fe_(4)O_(9)nanosheets.The synergistic effects arising from this unique architecture ultimately lead to superior photocatalytic performance.
基金National Natural Science Foundation of China(No.22275150)。
文摘To study the influence of silicon(Si)on 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20),NC/CL-20 composite explosives and Si/NC/CL-20 composite explosives were prepared by the electrostatic spraying method.The morphology,structure and thermal decomposition properties of the samples were analyzed using scanning electron microscopy(SEM),X-ray energy spectroscopy(EDS),infrared spectroscopy(FT-IR),and simultaneous thermal analyzer(TG-DSC).Additionally,the combustion process of the samples was tested using a high-speed camera.The results show that the addition of nano-Si contributes to the formation of composite explosives with regular morphology and smaller particle size.The Si/NC/CL-20 composite explosive has better and more uniform sphericity,with an average particle size of 73.4 nm,compared to the NC/CL-20 composite explosive.The Si/NC/CL-20 composite explosive which produced by the electrostatic spraying method,achieves physically uniform distribution of the components including NC,CL-20,Si.The addition of Si promotes the thermal decomposition of CL-20.In comparison to the NC/CL-20 composite explosive,the activation energy of the Si/NC/CL-20 composite explosive decreases by 16.78 kJ/mol,and the self-accelerated decomposition temperature and the critical temperature of thermal explosion decreases by 3.12 K and 2.61 K,respectively.Furthermore,Si/NC/CL-20 composite explosive has shorter ignition delay time and faster combustion rate compared to the NC/CL-20 composite explosive,which shows that Si can improve the combustion performance of CL-20.
文摘Public institutions constitute a vital component of China’s public service system,playing a significant functional role in the nation’s social development and construction.Human resource(HR)management is a vital component of internal administration within these institutions.The integration of performance appraisal is crucial for enhancing the effectiveness of HR management and facilitating the smooth operation of all institutional functions.Based on this premise,this article first briefly outlines the value of applying performance appraisal in the HR management of public institutions.It then explores strategies for implementing performance appraisal within this context,aiming to provide insights for promoting the sustained and healthy development of public institutions.
文摘During the final proofing stage of the paper,the wrong version of Fig.2 was accidently used when replacing it with a high-resolution version.The star and circle marks were missing in the published version.
文摘Nano-scale CuF_(2) with superior electrochemical activity was successfully prepared by a mixed solvent co-precipitation method.The SEM and TEM analyses demonstrated that the methanol concentration had a pronounced effect on both the particle size and the extent of agglomeration.With the increase in methanol content,the particle size and agglomeration of CuF_(2) decreased first and then increased.When the volume ratio of methanol to deionized water was 1:1,the CuF_(2) particles exhibited the smallest size and the lowest degree of agglomeration.CuF_(2) synthesized with 50%methanol exhibited superior electrochemical performances with a voltage plateau above 3 V and a 1st discharge capacity of 525.8 mAh·g^(-1) at 0.01 C due to the synergistic influence of the particle size and dispersion.The analysis results using electrochemical impedance spectroscopy(EIS)and constant current intermittent titration technique(GITT)affirmed the addition of methanol was beneficial for promoting Li+diffusion and accelerating electrochemical reaction kinetics of CuF_(2).
基金supported by the Open Fund of Hubei Key Laboratory of Construction Management in Hydropower Engineering(Grant No.2016KSD04)the Open Fund of Engineering Research Center of Eco-environment in Three Gorges Reservoir Region,Ministry of Education(Grant No.KF2016-11).
文摘Sponge city(SPC)is proposed to solve the issues such as the degradation of urban water ecosystem environment,imbalanced water resource allocation,urban water logging,and water contamination.The PPP(Public Private Partnership)model is combined to release the government pressure of SPC project construction.The development of the SPC-PPP model makes significant contributions to the sustainable development and the enhancement of urban resilience against water-related disasters.However,there is no scientific performance evaluation system on its operation period has been conducted.Therefore,the SPC-PPP Evaluation model aims to objectively and reasonably assess project effectiveness,promote its development and refine the evaluation framework.This paper has set up the MEE model for performance evaluation,with improved Matter-Element Extension method to assign values to the evaluation indices.The research results show that:(1)The MEE model is more accurate in the performance evaluation and its effectiveness is reflected in its ability to capture the correlation among different indices in the same membership,rather than merely focusing on individual indices.(2)The proposed approach provided a new aspect for performance evaluation,improving the accuracy of evaluation and promoting the development of SPC-PPP project.
文摘As a key sector in advancing China’s“carbon neutrality”goal,the machinery manufacturing industry has achieved remarkable development in recent years.Against this backdrop,the scientific and objective evaluation of the financial performance of machinery manufacturing enterprises has become a pressing issue in financial research.This topic is not only crucial for optimizing enterprise management and improving operational efficiency but also essential for enhancing overall industry performance and promoting sustainable development.This paper first introduces the concept of financial performance,followed by an analysis of related financial performance evaluation theories.It then focuses on the application of the entropy method in evaluating the financial performance of machinery manufacturing enterprises,detailing its analytical steps.Finally,a financial performance evaluation index system is constructed based on four dimensions:profitability,solvency,operational efficiency,and growth potential.
基金supported by the Science Technology Talents Lifting Project of Hunan Province(No.2022TJ-N16)the Natural Science Foundation of Hunan Province(Nos.2024JJ4022,2023JJ30277,2025JJ60382)+3 种基金the China Postdoctoral Fellowship Program(GZC20233205)the Scientifc Research Fund of Hunan Provincial Education Department,China(No.24B0270)the National Natural Science Foundation of China(No.32201646)the Key Project of Jiangxi Provincial Research and Development Program(No.20243BBI91001).
文摘The development of high-performance transition metal sulfide(TMS)/carbon composites to replace conventional graphite anode remains a critical challenge for advancing lithium-ion batteries(LIBs).In this study,a facile self-sacrifice template method is developed to prepare FeS encapsulated into N,S co-doped carbon(FeS/NSC)composite using melamine-cyanuric acid(MCA)supermolecule as a multifunctional template precursor.The function of MCA supermolecule for material synthesis is explored,revealing its special function as a dispersant,dopant and pore-forming agent.Furthermore,the effect of Fe source dosage on the morphology,structure and composition of the final products is explored.The resultant FeS/NSC-0.1(where 0.1 represents the mass of added Fe source)exhibits the most optimal proportion,characterized by a good dispersion status of FeS within the NSC matrix,effective N,S co-doping and ample porosity.Benefiting from these merits,the FeS/NSC-0.1 anode demonstrates significantly improved cycling stability and rate capability when compared to the counterparts.Undoubtedly,this work offers a universal method to produce advanced transition metal sulfide/carbon composite electrodes for energy storage and conversion systems.
基金supported by the National Science and Tech-nology Major Project of China(Nos.2017-II-0007-0021 and J2019-II-0017-0038)。
文摘Aerodynamic performances of axial compressors are significantly affected by variation of Reynolds number in aero-engines.In the design and analysis of compressors,previous correction methods for cascades and stages have difficulties in predicting comprehensively Reynolds number effects on airfoils,matching and characteristics curves.This study proposes Re-correction models for loss,deviation angle and endwall blockage based on classical theories and cascade tests,and loss and deviation models show good agreement in test data of NACA65 and C4 cascades.Throughflow method considering Reynolds number effects is developed by integrating the correction models into a verified Streamline Curvature(SLC)tool.A three-stage axial compressor is investigated through SLC and CFD methods from design Reynolds number(Red=2106)to low Re=4104,and the numerical methods are validated with test data of characteristic curves and spanwise distributions at Red.With Re reduction,SLC method with correction models well predicts variation in overall performances compared with CFD calculations and Wassell's model.Streamwise and spanwise matching such as total pressure and loss distributions in SLC predictions are basically consistent with those in CFD results at near-stall points under design and low Reynolds numbers.SLC and CFD methods share similar detections of stall risks in the third stage(Stg3),and their analyses of diffusion processes deviate to some extent due to different predictions in separated endwall flow.The correction models can be adopted to consider Reynolds number effects in through-flow design and analysis of axial compressors.
文摘This paper first introduces the overview of real estate appraisal theory,the basic situation of real estate appraisal,the basic principles and characteristics of real estate appraisal,and three main appraisal methods.On this basis,the specific use scope of each method,the meaning of each parameter,and the influencing factors are analyzed.Then,based on the in-depth study of various existing appraisal theories and methods,a new appraisal method is proposed:the appraisal analysis method based on fuzzy analytic hierarchy process.
基金supported by the National key R & D plan for the 13th five year plan (No. 2017YFC0805200)the Qingdao science and technology plan project (No.19-3-2-6-zhc)+1 种基金the Natural Science Foundation of Shandong Province (No. ZR2019MEE118)the National Natural Science Foundation of China (No. 51974179)。
文摘To relieve dust pollution in open cut coal mines and reduce the hazards of coal dust pollution to the environment and workers we optimized the synthesis of a dust suppressant by graft copolymerization of environmentally friendly soy protein isolate with methyl methacrylate.This dust suppressant could effectively control dust pollution in open cut coal mines. The optimized conditions for graft copolymerization in this case were determined by a response surface experiment designed with Design-Expert 10 software. Characterization by scanning electron microscopy showed a significant morphology change of the dust suppressant and the generation of a rigid and dense layer on its surface after interacting with coal dust.The layer exhibited good bonding and dust suppression performance. The analysis with Fourier-transform infrared spectroscopy revealed the appearance of new absorption peaks near 1300, 1072, and 1631 cm, demonstrating effective graft copolymerization. The proposed dust suppressant exhibited excellent wind erosion resistance, with a resistance that exceeded 90% at a wind speed of 6.5 m/sec. The successful graft copolymerization and effective bonding and curing of the dust suppressant on coal dust were experimentally verified.This is of great significance to the control of coal dust pollution.
基金supported by National Natural Science Foundation of China (Grant No. 50975139, Grant No. 50605031)Provincial Natural Science Foundation of Jiangsu, China (Grant No. 2008395)+1 种基金Foundation of State Key Laboratory of Robotics, China (Grant No. RLO200912)China Postdoctoral Science Foundation (Grant No. 20080441319, Grant No. 200902684)
文摘Dielectric elastomer actuator （DEA） show promise for mechatronic applications due to the advantages of dielectric elastomer, such as lightweight, flexible, low cost, high strain, etc, and many configurations of DEAs have been demonstrated. As a kind of linear actuator, cone DEAs are studied in some laboratory prototypes due to easy manufacturing, however, their performance have not been exploited fully. Based on the working principle of DEA, a four-bar linkage mechanism is designed to provide negative stiffness preload, which can increase displacement output of actuator （outer diameter 100 mm） to 17 mm. Three cone actuating units are assembled in parallel to enhance the maximum force output to 5.07 N. Loading experiments of actuator in forward and backward strokes are performed, the experimental results show that backward stroke has stronger actuating capability than forward stroke, accordingly application of actuator is recommended. Four factors rather than applied voltage, i.e., number of actuating units, pre-stretch ratio, inner diameter, and outer diameter, are determined as influencing factors for Taguchi method. Then the performance objectives of actuator, i.e., displacement output, maximum force output, and maximum work in backward stroke, are investigated based on L9（34） Taguchi orthogonal design. The mean signal-to-noise （S/N） ratio based on the larger-the-better criterion is calculated according to the acquired displacement and force output. Analytical results show that outer diameter has the most significant influence on displacement output, and maximum force out and work output are influenced most by number of actuating units. Inner diameter also has an important effect on the performance objectives of actuator, while pre-stretch ratio has the least influence. The proposed performance investigation is helpful for the design and application of cone actuator in mechatronic system.
基金supported by the Jiangxi Provincial Department of Education
文摘The nickel-based catalysts were prepared by the sol-gel method and used for the CH4 reforming with CO2. The effects of the sol-gel method on the specific surface area, catalytic activity, desorption, and reduction performances of catalysts were investigated with BET, TPR, and TPD. Compared with the catalyst prepared by the impregnation method, the results indicated that the catalysts prepared by the sol-gel method had larger specific surface area, showing higher catalytic activities and exhibiting perfect desorption and reduction performances. In addition, the modification effects of adding La were studied, and it was found that the 0.75NLBT catalyst constituted of 5wt.%Ni-0.75wt.%La was optimal.
基金the Doctoral Program of Higher Education of China(No.20070006012)Pre-research Project of China Academy of Space Technology.
文摘With the consideration of volume constraint of launch vehicle and trafficability of rover vehicle on lunar regolith terrain,a new design of radially deployable wheel is presented.For the purpose of achieving the meso-mechanics and dynamical behavior of lunar soil particles as well as macro-parameters of tractive performance for radially deployable wheel,the interaction between two types of wheel configurations and lunar soil particles is analyzed by means of discrete element method.The network of contact forces,the displacement vector chart,and the deformation of lunar soil beneath wheels are plotted.The equations of soil thrust,motion resistance,drawbar pull and driven torque are derived in granular scale based on the coordinates transformation and algebraic summation.The calculated results show that there is sufficient traction for both 6-split and 12-split radially deployable wheels with 304 mm outspread diameter to negotiate lunar regolith terrain specified here;the value of drawbar pull enhances with the increase of split number of radially deployable wheel,however,the required driven torque increases simultaneously,therefore,the tractive efficiency decreases.
基金funded by National Nature Science Foundation of China(Nos.51776010 and 91860205)supported by the Academic Excellence Foundation of BUAA for PhD Students,China。
文摘The alternative working modes and flexible working states are the outstanding features of an adaptive cycle engine, with a proper control schedule design being the only way to exploit the performance of such an engine. However, unreasonable design in the control schedule causes not only performance deterioration but also serious aerodynamic stability problems. Thus, in this work,a hybrid optimization method that automatically chooses the working modes and identifies the optimal and smooth control schedules is proposed, by combining the differential evolution algorithm and the Latin hypercube sampling method. The control schedule architecture does not only optimize the engine steady-state performance under different working modes but also solves the control-schedule discontinuity problem, especially during mode transition. The optimal control schedules are continuous and almost monotonic, and hence are strongly suitable for a control system, and are designed for two different working conditions, i.e., supersonic and subsonic throttling,which proves that the proposed hybrid method applies to various working conditions. The evaluation demonstrates that the proposed control method optimizes the engine performance, the surge margin of the compression components, and the range of the thrust during throttling.
基金Supported by the Open Research Foundation of State Key Laboratory of AUV,HEU under Grant No.2007015
文摘A new numerical method was developed for predicting the steady hydrodynamic performance of ducted propellers. A potential based surface panel method was applied both to the duct and the propeller, and the interaction between them was solved by an induced velocity potential iterative method. Compared with the induced velocity iterative method, the method presented can save programming and calculating time. Numerical results for a JD simplified ducted propeller series showed that the method presented is effective for predicting the steady hydrodynamic performance of ducted propellers.
文摘The wear behavior of AZ91 alloy was investigated by considering different parameters,such as load(10−50 N),sliding speed(160−220 mm/s)and sliding distance(250−1000 m).It was found that wear volume loss increased as load increased for all sliding distances and some sliding speeds.For sliding speed of 220 mm/s and sliding distance of 1000 m,the wear volume losses under loads of 10,20,30,40 and 50 N were calculated to be 15.0,19.0,24.3,33.9 and 37.4 mm3,respectively.Worn surfaces show that abrasion and oxidation were present at a load of 10 N,which changes into delamination at a load of 50 N.ANOVA results show that the contributions of load,sliding distance and sliding speed were 12.99%,83.04%and 3.97%,respectively.The artificial neural networks(ANN),support vector regressor(SVR)and random forest(RF)methods were applied for the prediction of wear volume loss of AZ91 alloy.The correlation coefficient(R2)values of SVR,RF and ANN for the test were 0.9245,0.9800 and 0.9845,respectively.Thus,the ANN model has promising results for the prediction of wear performance of AZ91 alloy.
基金Financial support from the National Natural Science Foundation of China (21968034) is gratefully acknowledged.
文摘In this work,NiMo catalysts with various contents of MoO_(3)were prepared through incipient wetness impregnation by a twostep method(NMxA)and onepot method(NMxB).The catalysts were then characterized by XRD,XPS,NH3TPD,H_(2)TPR,HRTEM,and N_(2)adsorptiondesorption technologies.The performance of the NiMo/Al_(2)O_(3) catalysts was investigated by hydrocracking lowtemperature coal tar.When the MoO3 content was 15 wt%,the interaction between Ni species and Al_(2)O_(3) on the NM15B catalyst was stronger than that on the NM15A catalyst,resulting in the poor performance of the former.When the MoO^(3) content was 20 wt%,MoO_(3) agglomerated on the surface of the NM20A catalyst,leading to decreased number of active sites and specific surface area and reduced catalytic performance.The increase in the number of MoS_(2) stack layers strengthened the interaction between Ni and Mo species of the NM20B catalyst and consequently improved its catalytic performance.When the MoO_(3) content reached 25 wt%,the active metals agglomerated on the surface of the NiMo catalysts,thereby directly decreasing the number of active sites.In conclusion,the twostep method is suitable for preparing catalysts with large pore diameter and low MoO_(3) content loading,and the onepot method is more appropriate for preparing catalysts with large specific surface area and high MoO_(3) content.Moreover,the NMxA catalysts had larger average pore diameter than the NMxB catalysts and exhibited improved desulfurization performance.
基金Funded by the Key Research and Development Projects in Shaanxi Province(No.2022SF-328)Science and Technology Project of Shaanxi Department of Transportation(Nos.19-10K,19-28K)Science and Technology Project of Henan Department of Transportation(No.2020J-2-3)。
文摘In order to comprehensively utilize the remaining bamboo residue of bamboo products,this paper presents a research on recycling the bamboo fibers from bamboo residue for improving the performance of the asphalt mixtures.First of all,the basic performance parameters of sinocalamus affinis fiber,phyllostachys pubescens fiber,green bamboo fiber were tested and analyzed,and the optimal content and length were put forward.Then,the mix ratio design of the bamboo fiber modified asphalt mixture was further designed through the response surface method,and was verified the rationality of the mix ratio.Finally,the mixture specimens were made according to the experimental design mix ratio,and the high temperature,low temperature performance and moisture susceptibility of the bamboo fiber modified mixtures asphalt were tested.The results showed that the high temperature performance,low temperature performance and moisture susceptibility of bamboo fiber modified asphalt mixtures were improved compared with the performance of SBS modified asphalt mixture.When the length of bamboo fiber is 7.25 mm and the content of 0.22%,the road performance of the asphalt mixture was optimal.Consequentially,the decomposition of bamboo residue into bamboo fiber and its application in asphalt pavement can improve the reuse of bamboo waste,with remarkable environmental benefits and great promotion value.
