Landscape ecology provides new theoretical frameworks and methodologies for understanding complex ecological phenomena at multiple scales.Studies of landscape ecology focus on understanding the dynamics of eco-logical...Landscape ecology provides new theoretical frameworks and methodologies for understanding complex ecological phenomena at multiple scales.Studies of landscape ecology focus on understanding the dynamics of eco-logical patterns and processes,and highlight the integration of multiple disciplines.In this paper,we discussed the problems and challenges that landscape ecology is currently facing,emphasizing the limitations of current methods used to describe dynamic landscape patterns and processes.We suggested that the focus should be on the integration of ground-based observation,mobile monitoring,transect survey,and remote-sensing monitoring,as well as improved coupling of experimental and model simulations.In addition,we outlined the research frontiers in landscape ecology,including scaling,integrated pattern and process modeling,and regional synthesis.Lastly,a brief review of pat-tern-process-scale coupling studies in China was provided.We concluded by pointing out that pattern-process-scale interactions,correlations between natural,economic,and social processes,and the coupling of human and natural systems will be major research areas in landscape ecology in the future.展开更多
Following a new train of thinking, this paper has explored first the potential information in the ground resistivitydata observed by the existing geoelectric observation system, investigated and proposed a new dimensi...Following a new train of thinking, this paper has explored first the potential information in the ground resistivitydata observed by the existing geoelectric observation system, investigated and proposed a new dimensionlessgeoelectric precursor factor, the degree of ground resistivity anisotropy, S, and studied the characteristics of dynamic evolution pattern of S during the seismogenic process. The results show that, during the seismogenic process, the degree of ground resistivity anisotropy (S) displays h process of 'normal' → 'abnormal strengthening(amplitude, range)' → 'abnormal weakening'→ 'earthquake occurrence'→ 'normal'. The earthquake wouldoccur at the time when the S value has entered the late stage of strengthening and turns to weaken and in the gradient belt on the margin ofS anomaly region. The dynamic evolution pattern ofS reflects the changes of the tectonicstress field during the seismogenic process. Therefore, it would be possible to trace the process of earthquake generation and occurrence from the dynamic evolution pattern ofS so as to service eaJ'thquake prediction.展开更多
A water model and a high-speed video camera were utilized in the 300-t RH equipment to study the effect of steel flow patterns in a vacuum chamber on fast decarburization and a superior flow-pattern map was obtained d...A water model and a high-speed video camera were utilized in the 300-t RH equipment to study the effect of steel flow patterns in a vacuum chamber on fast decarburization and a superior flow-pattern map was obtained during the practical RH process. There are three flow patterns with different bubbling characteristics and steel surface states in the vacuum chamber： boiling pattern（BP）, transition pattern（TP）, and wave pattern（WP）. The effect of the liquid-steel level and the residence time of the steel in the chamber on flow patterns and decarburization reaction were investigated, respectively. The liquid-steel level significantly affected the flow-pattern transition from BP to WP, and the residence time and reaction area were crucial to evaluate the whole decarburization process rather than the circulation flow rate and mixing time. A superior flow-pattern map during the practical RH process showed that the steel flow pattern changed from BP to TP quickly, and then remained as TP until the end of decarburization.展开更多
The combination of magnesium alloys with the low-pressure expendable pattern casting(LP-EPC) process would bright future for application of magnesium alloys. The researches are focused on the effect of process paramet...The combination of magnesium alloys with the low-pressure expendable pattern casting(LP-EPC) process would bright future for application of magnesium alloys. The researches are focused on the effect of process parameters on the internal casting quality of magnesium alloy parts. AZ91D magnesium alloy castings were produced for different combinations of the LP-EPC process parameters. Specifically,pouring temperature,vacuum,filling velocity and coupling action of these factors were manipulated to observe their effect on the casting porosity and density distribution. The results indicate that the pouring temperature with LP-EPC process is lower than it in gravity casting. The selected process parameters,such as vacuum,filling velocity and coupled modes of them,must ensure melt metal flowing front profile exhibiting smooth and convex shape. The optimal process parameters for the castings are pouring temperature 983-1 023 K,vacuum 0.02-0.03 MPa,filling velocity 60-95 mm/s,and simultaneous filling with sucking.展开更多
With data from the project Collaborative Observation of Semi-arid/Arid Regions in North China, collected during July and September 2008, the spatial patterns of land surface processes over arid and semiarid regions ha...With data from the project Collaborative Observation of Semi-arid/Arid Regions in North China, collected during July and September 2008, the spatial patterns of land surface processes over arid and semiarid regions have been investigated based on the ordinary Kriging interpolation approach. Generally, for the radiation processes, downward and upward short-wave radiation have a uniformly increasing trend with latitude, but the spatial patterns of long-wave radiation present notable regional differences: both upward and downward long-wave radiation increase with latitude in the west of North China, while in the east they vary inversely with latitude, suggesting surface temperature and clouds respectively have feedbacks to the long-wave radiation in the west and east of North China. The surface net radiation basically has a negative latitudinal trend. Long-wave radiation budget plays an important role in the spatial pattern of surface net radiation, particularly in the east of North China, although short-wave radiation budget largely determines the magnitude of surface net radiation. For the energy processes, latent and sensible heat flux varies conversely with latitude: more available land surface energy is consumed by evaporating soil water at lower latitudes while more is used for heating the atmosphere at higher latitudes. A soil heat flux maximum and minimum are found in Loess Plateau and Qinghai Plateau respectively, and a maximum is seen in the northeast China.展开更多
The changing of flow conditions caused by construction of hydro-projects will result in river's refor- mation and development of channel pattern.In this paper,the development of channel pattern in the process of r...The changing of flow conditions caused by construction of hydro-projects will result in river's refor- mation and development of channel pattern.In this paper,the development of channel pattern in the process of reformation is studied by means of flume experiments.Influence of slope,grain size,angle-of-inflow,dis- charge and discharge process are comprehensively analyzed according to the experimental data.It was found that the channel would be widened as the river slope or discharge increased and grain s...展开更多
During the EPC (expendable pattern casting) process, one of the essential requirements is to prevent pattern distortion duringsand filling and compaction. A new method which vibrates the system in a two-dimensional ci...During the EPC (expendable pattern casting) process, one of the essential requirements is to prevent pattern distortion duringsand filling and compaction. A new method which vibrates the system in a two-dimensional circular mode has been appliedto the EPC process. The molding properties of unbonded sand obtained by this new vibration mode are investigated andcompared with those in the one-dimensional vertical mode. For adequate compaction of sand. the circular vibration mode ismore effective than the vertical mode. Sand became more fluidized by the circular vibration and the particle pressure coefficientwas close to unity The particle pressure coefficient, which is defined as the ratio of horizontal to vertical sand pressure, isresponsible for the effectiveness of sand filling.展开更多
1 Introduction The large clusters of Zn-Pb deposits in northeastern Yunnan,located in the southwestern margin of the Yangtze Block,are an important part of the Sichuan-YunnanGuizhou Pb-Zn Poly-metallic Metallogenic Tr...1 Introduction The large clusters of Zn-Pb deposits in northeastern Yunnan,located in the southwestern margin of the Yangtze Block,are an important part of the Sichuan-YunnanGuizhou Pb-Zn Poly-metallic Metallogenic Triangle Area展开更多
The pharyngeal dental formula of Mylopharyngodon piceus is 4-5 as a rule, and the dentition isasymmetrical. It is difficult to identify each tooth in the larval dentition. In this paper the appearancepattem of tooth g...The pharyngeal dental formula of Mylopharyngodon piceus is 4-5 as a rule, and the dentition isasymmetrical. It is difficult to identify each tooth in the larval dentition. In this paper the appearancepattem of tooth germ with developmental process in this fish is described in detail. The formationpattern of the left dentition is contrasted with that of the right one. In the developmental process,the left pharyngeal dentition lacks teeth at position An3. Thus the left dentition is D-type as designatedby Nakajima(1984), while the right one is A-type.展开更多
Sensors play an important role in information perception during the age of intelligence,particularly in areas such as environmental monitoring and human perception.To meet the huge demands for information acquisition ...Sensors play an important role in information perception during the age of intelligence,particularly in areas such as environmental monitoring and human perception.To meet the huge demands for information acquisition in the whole society,the development of elaborated sensor structures using patterned manufacturing technology is important to improve the performance of sensors.Creating patterned structures can enhance the interaction between the sensitive material and target matter,increase the contact area between the sensor and the target matter,amplify the effect of target matter on the sensor structure,and enhance the density of information sensing by building arrays.This review presents a comprehensive overview of patterned micro-nanostructure manufacturing techniques for performance enhancement of flexible sensors,including printing,exposure lithography,mould method,soft lithography,nanoimprinting lithography,and laser direct writing technology.Meanwhile,it introduces the evaluation methods of flexible sensor performance and discusses how patterned structures influence this performance.Finally,some practical application examples of patterned manufacturing techniques are introduced according to different types of flexible sensors.This review also summarises and provides an outlook on the role of these techniques in enhancing sensor performance offering valuable insights for future developments in the patterned manufacturing of flexible sensors.展开更多
A growing number of international studies have highlighted that ambient air pollution exposures are related to different health outcomes. To do so, researchers need to estimate exposure levels to air pollution through...A growing number of international studies have highlighted that ambient air pollution exposures are related to different health outcomes. To do so, researchers need to estimate exposure levels to air pollution throughout everyday life. In the literature, the most commonly used estimate is based on home address only or taking into account, in addition, the work address. However, several studies have shown the importance of daily mobility in the estimate of exposure to air pollutants. In this context, we developed an R procedure that estimates individual exposures combining home addresses, several important places, and itineraries of the principal mobility during a week. It supplies researchers a useful tool to calculate individual daily exposition to air pollutants weighting by the time spent at each of the most frequented locations (work, shopping, residential address, etc.) and while commuting. This task requires the efficient calculation of travel time matrices or the examination of multimodal transport routes. This procedure is freely available from the Equit’Area project website: (https://www.equitarea.org). This procedure is structured in three parts: the first part is to create a network, the second allows to estimate main itineraries of the daily mobility and the last one tries to reconstitute the level of air pollution exposure. One main advantage of the tool is that the procedure can be used with different spatial scales and for any air pollutant.展开更多
The influence of a key process variable on the mold filling characteristics of AZ91 Mg-alloy was studied in the low pressure EPC process.The applied flow quantity of insert gas from 1 to 5 m~3/h associated with the pr...The influence of a key process variable on the mold filling characteristics of AZ91 Mg-alloy was studied in the low pressure EPC process.The applied flow quantity of insert gas from 1 to 5 m~3/h associated with the pressurizing rate in the low pressure EPC casting process was considered for rectangle and L-shape plate casting. The experimental results show that there is an optimal flow quantity of insert gas for good mold filling characteristics in AZ91 Mg-alloy low-pressure EPC process. The optimal flow quantity of insert gas for the specimens is 3 to 4 m~3/h. Either less or higher than the optimal flow quantity of insert gas would lead to misrun defects or folds, blisters and porosity defects. The practice of hub casting confirmed that the low-pressure EPC process with an optimal processing variable exemplified as 4 m~3/h gas flow quantity was capable of producing complicated magnesium castings without misrun defects.展开更多
The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process i...The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process is out of statistical control and there are assignable causes for process variation that should be investigated. This paper proposes an artificial neural network algorithm to identify the three basic control chart patterns;natural, shift, and trend. This identification is in addition to the traditional statistical detection of runs in data, since runs are one of the out of control situations. It is assumed that a process starts as a natural pattern and then may undergo only one out of control pattern at a time. The performance of the proposed algorithm was evaluated by measuring the probability of success in identifying the three basic patterns accurately, and comparing these results with previous research work. The comparison showed that the proposed algorithm realized better identification than others.展开更多
Based on the dynamic monitoring data of crustal deformation, the parameter evolution for the dynamics pattern and fractal dimension of crustal deformation field and the integral activity level of many faults etc. befo...Based on the dynamic monitoring data of crustal deformation, the parameter evolution for the dynamics pattern and fractal dimension of crustal deformation field and the integral activity level of many faults etc. before and after the Tangshan (1976) and Lijiang (1996) strong earthquakes and others are studied by using the method of pattern dynamics. It is exposed that two time space characters, the ordered dimension drop of the deformation field and the accelerated motion of multi fault before an earthquake, are probably caused by the deformation localization and fault softening after the seismogenic process enters the nonlinear stage. They could be an important seismic precursor if they occurred repeatedly before strong earthquakes.展开更多
A wide range of methods for geological reservoir modeling has been offered from which a few can reproduce complex geological settings, especially different facies and fracture networks. Multi Point Statistic (MPS) alg...A wide range of methods for geological reservoir modeling has been offered from which a few can reproduce complex geological settings, especially different facies and fracture networks. Multi Point Statistic (MPS) algorithms by applying image processing techniques and Artificial Intelligence (AI) concepts proved successful to model high-order relations from a visually and statistically explicit model, a training image. In this approach, the patterns of the final image (geological model) are obtained from a training image that defines a conceptual geological scenario for the reservoir by depicting relevant geological patterns expected to be found in the subsurface. The aim is then to reproduce these training patterns within the final image. This work presents a multiple grid filter based MPS algorithm to facies and fracture network images reconstruction. Processor is trained by training images (TIs) which are representative of a spatial phenomenon (fracture network, facies...). Results shown in this paper give visual appealing results for the reconstruction of complex structures. Computationally, it is fast and parsimonious in memory needs.展开更多
This paper presents a fringe-carrier method that eliminates sign ambiguity of transient moire fringes which can be used to automatically determine the relative orders. A fringe carrier is preset in the static state of...This paper presents a fringe-carrier method that eliminates sign ambiguity of transient moire fringes which can be used to automatically determine the relative orders. A fringe carrier is preset in the static state of the specimen and the dynamic in-plane displacements are recorded as the modulation to the frequency of the carrier fringes when the specimen is loaded by impact. According to a modulating criterion developed from the modulation degree, the fringes of the transient moire patterns keep monotonical in orders so that they can be automatically encoded in grey levels by a digital image system. The moire orders purely caused by dynamic loadings are evaluated by subtracting the grey-value of the unmodulated carrier image from that of the modulated carrier images encoded by their orders. With the subtracted moire orders the strain components can be obtained, and, correspondingly, the histograms of dynamic displacement moire images are shown with order variation by image-difference.展开更多
This paper discusses a pattern design system in textile industry,the establishment of an imagedatabase which is used to store various kinds of source materials for designers’ reference in order tospeed up design proc...This paper discusses a pattern design system in textile industry,the establishment of an imagedatabase which is used to store various kinds of source materials for designers’ reference in order tospeed up design process.Pattern design image database (PDIDB) runs on the double-machine hardware system com-posed of ALTOS-986 and IBM PC/XT microcomputer.The former (host) manages imagedatabase,and the latter works both as a terminal to operate PDIDB and as an image processingstation to input,output,edit and display image data.PDIDB has two mainparts,the image storage management system and the image attributemanagement system and provides some functions,such as retrieval,deleting and updating.展开更多
A preferred growing perturbation concept has been introduced into the dynamical study on the generation ofatmospheric teleconnection patterns.It is shown that all the important teleconnection patterns observed in the ...A preferred growing perturbation concept has been introduced into the dynamical study on the generation ofatmospheric teleconnection patterns.It is shown that all the important teleconnection patterns observed in the realatmosphere may be established through internal barotropic dynamical processes.展开更多
The river continuum concept represents the most general framework addressing the spatial variation of both structure and function in river ecosystems. In the Mediterranean ecoregion, summer drought events and dams con...The river continuum concept represents the most general framework addressing the spatial variation of both structure and function in river ecosystems. In the Mediterranean ecoregion, summer drought events and dams constitute the main sources of local disturbance to the structure and functioning of river ecosystems occurring in the river basin. In this study, we analysed patterns of spatial variation of detritus processing in a 7th order river of the Mediterranean ecoregion(River Tirso, Sardinia-Italy) and in three 4th order sub-basins which were exposed to different summer drought pressures. The study was carried out on Phragmites australis and Alnus glutinosa leaf detritus at 31 field sites in seasonal field experiment Detritus processing rates were higher for Alnus glutinosa than for Phragmites australis plant detritus. Processing rates of Alnus glutinosa leaves varied among seasons and study sites from 0.006 d -1 to 0.189 d -1 and those of Phragmites australis leaves ranged from 0.0008 d -1 to 0.102 d -1, with the lowest values occurring at sites exposed to summer drought. Seasons and sites accounted for a significant proportion of such variability. Alder detritus decay rates generally decreased with increasing stream order, while reed detritus decay rates generally increased on the same spatial gradient. Summer drought events affected these spatial patterns of variation by influencing significantly the decay rates of both plant detritus. The comparisons among and within sub-basins showed strong negative influence of summer drought on detritus processing rates. Similarly, in the entire River Tirso basin decay rates were always lower at disturbed than at undisturbed sites for each stream order; decay rates of reed detritus remained lower at those sites even after the end of the disturbance events, while alder decay rates recovered rapidly from the summer drought perturbations. The different recovery of the processing rates of the two leaves could also explain the different patterns of spatial variation observed between the two leaves.展开更多
基金Under the auspices of National Natural Science Foundation of China (No.40930528)State Forestry Administration of China (No.201004058)
文摘Landscape ecology provides new theoretical frameworks and methodologies for understanding complex ecological phenomena at multiple scales.Studies of landscape ecology focus on understanding the dynamics of eco-logical patterns and processes,and highlight the integration of multiple disciplines.In this paper,we discussed the problems and challenges that landscape ecology is currently facing,emphasizing the limitations of current methods used to describe dynamic landscape patterns and processes.We suggested that the focus should be on the integration of ground-based observation,mobile monitoring,transect survey,and remote-sensing monitoring,as well as improved coupling of experimental and model simulations.In addition,we outlined the research frontiers in landscape ecology,including scaling,integrated pattern and process modeling,and regional synthesis.Lastly,a brief review of pat-tern-process-scale coupling studies in China was provided.We concluded by pointing out that pattern-process-scale interactions,correlations between natural,economic,and social processes,and the coupling of human and natural systems will be major research areas in landscape ecology in the future.
文摘Following a new train of thinking, this paper has explored first the potential information in the ground resistivitydata observed by the existing geoelectric observation system, investigated and proposed a new dimensionlessgeoelectric precursor factor, the degree of ground resistivity anisotropy, S, and studied the characteristics of dynamic evolution pattern of S during the seismogenic process. The results show that, during the seismogenic process, the degree of ground resistivity anisotropy (S) displays h process of 'normal' → 'abnormal strengthening(amplitude, range)' → 'abnormal weakening'→ 'earthquake occurrence'→ 'normal'. The earthquake wouldoccur at the time when the S value has entered the late stage of strengthening and turns to weaken and in the gradient belt on the margin ofS anomaly region. The dynamic evolution pattern ofS reflects the changes of the tectonicstress field during the seismogenic process. Therefore, it would be possible to trace the process of earthquake generation and occurrence from the dynamic evolution pattern ofS so as to service eaJ'thquake prediction.
基金financially supported by the National Natural Science Foundation of China (No.51704203)the PhD Early Development Program of Taiyuan University of Science and Technology (Nos. 20152008, 20152013, and 20152018)+2 种基金Shanxi Province Science Foundation for Youths (No. 201601D202027)Key Project of Research and Development Plan of Shanxi Province (Nos. 201603D111004 and 201603D121010)NSFC-Shanxi Coal Based Low Carbon Joint Fund (No. U1510131)
文摘A water model and a high-speed video camera were utilized in the 300-t RH equipment to study the effect of steel flow patterns in a vacuum chamber on fast decarburization and a superior flow-pattern map was obtained during the practical RH process. There are three flow patterns with different bubbling characteristics and steel surface states in the vacuum chamber： boiling pattern（BP）, transition pattern（TP）, and wave pattern（WP）. The effect of the liquid-steel level and the residence time of the steel in the chamber on flow patterns and decarburization reaction were investigated, respectively. The liquid-steel level significantly affected the flow-pattern transition from BP to WP, and the residence time and reaction area were crucial to evaluate the whole decarburization process rather than the circulation flow rate and mixing time. A superior flow-pattern map during the practical RH process showed that the steel flow pattern changed from BP to TP quickly, and then remained as TP until the end of decarburization.
基金Projects (50275058) supported by the National Natural Science Foundation of China
文摘The combination of magnesium alloys with the low-pressure expendable pattern casting(LP-EPC) process would bright future for application of magnesium alloys. The researches are focused on the effect of process parameters on the internal casting quality of magnesium alloy parts. AZ91D magnesium alloy castings were produced for different combinations of the LP-EPC process parameters. Specifically,pouring temperature,vacuum,filling velocity and coupling action of these factors were manipulated to observe their effect on the casting porosity and density distribution. The results indicate that the pouring temperature with LP-EPC process is lower than it in gravity casting. The selected process parameters,such as vacuum,filling velocity and coupled modes of them,must ensure melt metal flowing front profile exhibiting smooth and convex shape. The optimal process parameters for the castings are pouring temperature 983-1 023 K,vacuum 0.02-0.03 MPa,filling velocity 60-95 mm/s,and simultaneous filling with sucking.
基金supported by the State Key Program of National Natural Science of China (Grant No. 40830957)
文摘With data from the project Collaborative Observation of Semi-arid/Arid Regions in North China, collected during July and September 2008, the spatial patterns of land surface processes over arid and semiarid regions have been investigated based on the ordinary Kriging interpolation approach. Generally, for the radiation processes, downward and upward short-wave radiation have a uniformly increasing trend with latitude, but the spatial patterns of long-wave radiation present notable regional differences: both upward and downward long-wave radiation increase with latitude in the west of North China, while in the east they vary inversely with latitude, suggesting surface temperature and clouds respectively have feedbacks to the long-wave radiation in the west and east of North China. The surface net radiation basically has a negative latitudinal trend. Long-wave radiation budget plays an important role in the spatial pattern of surface net radiation, particularly in the east of North China, although short-wave radiation budget largely determines the magnitude of surface net radiation. For the energy processes, latent and sensible heat flux varies conversely with latitude: more available land surface energy is consumed by evaporating soil water at lower latitudes while more is used for heating the atmosphere at higher latitudes. A soil heat flux maximum and minimum are found in Loess Plateau and Qinghai Plateau respectively, and a maximum is seen in the northeast China.
基金Supported by National Key Basic Research and Development Program(973 Program) (2003CB415205),the National Natural Science Foundation of China(50479036)
文摘The changing of flow conditions caused by construction of hydro-projects will result in river's refor- mation and development of channel pattern.In this paper,the development of channel pattern in the process of reformation is studied by means of flume experiments.Influence of slope,grain size,angle-of-inflow,dis- charge and discharge process are comprehensively analyzed according to the experimental data.It was found that the channel would be widened as the river slope or discharge increased and grain s...
文摘During the EPC (expendable pattern casting) process, one of the essential requirements is to prevent pattern distortion duringsand filling and compaction. A new method which vibrates the system in a two-dimensional circular mode has been appliedto the EPC process. The molding properties of unbonded sand obtained by this new vibration mode are investigated andcompared with those in the one-dimensional vertical mode. For adequate compaction of sand. the circular vibration mode ismore effective than the vertical mode. Sand became more fluidized by the circular vibration and the particle pressure coefficientwas close to unity The particle pressure coefficient, which is defined as the ratio of horizontal to vertical sand pressure, isresponsible for the effectiveness of sand filling.
基金supported by the Funds for the program of the National Natural Science Foundation (Noes. 41572060, U1133602)Projects of YM Lab (2011)Innovation Team of Yunnan province and KMUST (2008,2012)
文摘1 Introduction The large clusters of Zn-Pb deposits in northeastern Yunnan,located in the southwestern margin of the Yangtze Block,are an important part of the Sichuan-YunnanGuizhou Pb-Zn Poly-metallic Metallogenic Triangle Area
基金This project was funded by the International Cooperation of japan-Chinathe National Natural Science Foundation of China
文摘The pharyngeal dental formula of Mylopharyngodon piceus is 4-5 as a rule, and the dentition isasymmetrical. It is difficult to identify each tooth in the larval dentition. In this paper the appearancepattem of tooth germ with developmental process in this fish is described in detail. The formationpattern of the left dentition is contrasted with that of the right one. In the developmental process,the left pharyngeal dentition lacks teeth at position An3. Thus the left dentition is D-type as designatedby Nakajima(1984), while the right one is A-type.
基金financial support from the National Key Research and Development Program of China(Grant 2024YFB3212100)National Natural Science Foundation of China(NSFC Grant Nos.62422409,62174152 and 62374159)from the Youth Innovation Promotion Association of Chinese Academy of Sciences(No.2020115)。
文摘Sensors play an important role in information perception during the age of intelligence,particularly in areas such as environmental monitoring and human perception.To meet the huge demands for information acquisition in the whole society,the development of elaborated sensor structures using patterned manufacturing technology is important to improve the performance of sensors.Creating patterned structures can enhance the interaction between the sensitive material and target matter,increase the contact area between the sensor and the target matter,amplify the effect of target matter on the sensor structure,and enhance the density of information sensing by building arrays.This review presents a comprehensive overview of patterned micro-nanostructure manufacturing techniques for performance enhancement of flexible sensors,including printing,exposure lithography,mould method,soft lithography,nanoimprinting lithography,and laser direct writing technology.Meanwhile,it introduces the evaluation methods of flexible sensor performance and discusses how patterned structures influence this performance.Finally,some practical application examples of patterned manufacturing techniques are introduced according to different types of flexible sensors.This review also summarises and provides an outlook on the role of these techniques in enhancing sensor performance offering valuable insights for future developments in the patterned manufacturing of flexible sensors.
文摘A growing number of international studies have highlighted that ambient air pollution exposures are related to different health outcomes. To do so, researchers need to estimate exposure levels to air pollution throughout everyday life. In the literature, the most commonly used estimate is based on home address only or taking into account, in addition, the work address. However, several studies have shown the importance of daily mobility in the estimate of exposure to air pollutants. In this context, we developed an R procedure that estimates individual exposures combining home addresses, several important places, and itineraries of the principal mobility during a week. It supplies researchers a useful tool to calculate individual daily exposition to air pollutants weighting by the time spent at each of the most frequented locations (work, shopping, residential address, etc.) and while commuting. This task requires the efficient calculation of travel time matrices or the examination of multimodal transport routes. This procedure is freely available from the Equit’Area project website: (https://www.equitarea.org). This procedure is structured in three parts: the first part is to create a network, the second allows to estimate main itineraries of the daily mobility and the last one tries to reconstitute the level of air pollution exposure. One main advantage of the tool is that the procedure can be used with different spatial scales and for any air pollutant.
文摘The influence of a key process variable on the mold filling characteristics of AZ91 Mg-alloy was studied in the low pressure EPC process.The applied flow quantity of insert gas from 1 to 5 m~3/h associated with the pressurizing rate in the low pressure EPC casting process was considered for rectangle and L-shape plate casting. The experimental results show that there is an optimal flow quantity of insert gas for good mold filling characteristics in AZ91 Mg-alloy low-pressure EPC process. The optimal flow quantity of insert gas for the specimens is 3 to 4 m~3/h. Either less or higher than the optimal flow quantity of insert gas would lead to misrun defects or folds, blisters and porosity defects. The practice of hub casting confirmed that the low-pressure EPC process with an optimal processing variable exemplified as 4 m~3/h gas flow quantity was capable of producing complicated magnesium castings without misrun defects.
文摘The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process is out of statistical control and there are assignable causes for process variation that should be investigated. This paper proposes an artificial neural network algorithm to identify the three basic control chart patterns;natural, shift, and trend. This identification is in addition to the traditional statistical detection of runs in data, since runs are one of the out of control situations. It is assumed that a process starts as a natural pattern and then may undergo only one out of control pattern at a time. The performance of the proposed algorithm was evaluated by measuring the probability of success in identifying the three basic patterns accurately, and comparing these results with previous research work. The comparison showed that the proposed algorithm realized better identification than others.
文摘Based on the dynamic monitoring data of crustal deformation, the parameter evolution for the dynamics pattern and fractal dimension of crustal deformation field and the integral activity level of many faults etc. before and after the Tangshan (1976) and Lijiang (1996) strong earthquakes and others are studied by using the method of pattern dynamics. It is exposed that two time space characters, the ordered dimension drop of the deformation field and the accelerated motion of multi fault before an earthquake, are probably caused by the deformation localization and fault softening after the seismogenic process enters the nonlinear stage. They could be an important seismic precursor if they occurred repeatedly before strong earthquakes.
文摘A wide range of methods for geological reservoir modeling has been offered from which a few can reproduce complex geological settings, especially different facies and fracture networks. Multi Point Statistic (MPS) algorithms by applying image processing techniques and Artificial Intelligence (AI) concepts proved successful to model high-order relations from a visually and statistically explicit model, a training image. In this approach, the patterns of the final image (geological model) are obtained from a training image that defines a conceptual geological scenario for the reservoir by depicting relevant geological patterns expected to be found in the subsurface. The aim is then to reproduce these training patterns within the final image. This work presents a multiple grid filter based MPS algorithm to facies and fracture network images reconstruction. Processor is trained by training images (TIs) which are representative of a spatial phenomenon (fracture network, facies...). Results shown in this paper give visual appealing results for the reconstruction of complex structures. Computationally, it is fast and parsimonious in memory needs.
基金The project supported by Alexander von Humboldt Foundation or Germany and the National Natural Science Foundation of China
文摘This paper presents a fringe-carrier method that eliminates sign ambiguity of transient moire fringes which can be used to automatically determine the relative orders. A fringe carrier is preset in the static state of the specimen and the dynamic in-plane displacements are recorded as the modulation to the frequency of the carrier fringes when the specimen is loaded by impact. According to a modulating criterion developed from the modulation degree, the fringes of the transient moire patterns keep monotonical in orders so that they can be automatically encoded in grey levels by a digital image system. The moire orders purely caused by dynamic loadings are evaluated by subtracting the grey-value of the unmodulated carrier image from that of the modulated carrier images encoded by their orders. With the subtracted moire orders the strain components can be obtained, and, correspondingly, the histograms of dynamic displacement moire images are shown with order variation by image-difference.
文摘This paper discusses a pattern design system in textile industry,the establishment of an imagedatabase which is used to store various kinds of source materials for designers’ reference in order tospeed up design process.Pattern design image database (PDIDB) runs on the double-machine hardware system com-posed of ALTOS-986 and IBM PC/XT microcomputer.The former (host) manages imagedatabase,and the latter works both as a terminal to operate PDIDB and as an image processingstation to input,output,edit and display image data.PDIDB has two mainparts,the image storage management system and the image attributemanagement system and provides some functions,such as retrieval,deleting and updating.
文摘A preferred growing perturbation concept has been introduced into the dynamical study on the generation ofatmospheric teleconnection patterns.It is shown that all the important teleconnection patterns observed in the realatmosphere may be established through internal barotropic dynamical processes.
文摘The river continuum concept represents the most general framework addressing the spatial variation of both structure and function in river ecosystems. In the Mediterranean ecoregion, summer drought events and dams constitute the main sources of local disturbance to the structure and functioning of river ecosystems occurring in the river basin. In this study, we analysed patterns of spatial variation of detritus processing in a 7th order river of the Mediterranean ecoregion(River Tirso, Sardinia-Italy) and in three 4th order sub-basins which were exposed to different summer drought pressures. The study was carried out on Phragmites australis and Alnus glutinosa leaf detritus at 31 field sites in seasonal field experiment Detritus processing rates were higher for Alnus glutinosa than for Phragmites australis plant detritus. Processing rates of Alnus glutinosa leaves varied among seasons and study sites from 0.006 d -1 to 0.189 d -1 and those of Phragmites australis leaves ranged from 0.0008 d -1 to 0.102 d -1, with the lowest values occurring at sites exposed to summer drought. Seasons and sites accounted for a significant proportion of such variability. Alder detritus decay rates generally decreased with increasing stream order, while reed detritus decay rates generally increased on the same spatial gradient. Summer drought events affected these spatial patterns of variation by influencing significantly the decay rates of both plant detritus. The comparisons among and within sub-basins showed strong negative influence of summer drought on detritus processing rates. Similarly, in the entire River Tirso basin decay rates were always lower at disturbed than at undisturbed sites for each stream order; decay rates of reed detritus remained lower at those sites even after the end of the disturbance events, while alder decay rates recovered rapidly from the summer drought perturbations. The different recovery of the processing rates of the two leaves could also explain the different patterns of spatial variation observed between the two leaves.
