Carbon dioxide （CO2） capture and geological storage （CCS） is one of promising technologies for greenhouse gas effect mitigation. Many geotechnical challenges remain during carbon dioxide storage field practices, a...Carbon dioxide （CO2） capture and geological storage （CCS） is one of promising technologies for greenhouse gas effect mitigation. Many geotechnical challenges remain during carbon dioxide storage field practices, among which effectively detecting CO2 from deep underground is one of engineering problems. This paper reviews monitoring techniques currently used during CO2 injection and storage. A method developed based on measuring seismic microtremors is of main interest. This method was first successfully used to characterize a site in this paper. To explore its feasibility in C02 storage monitoring, numerical simulations were conducted to investigate detectable changes in elastic wave signatures due to injection and geological storage of CO2. It is found that, although it is effective for shallow earth profile estimation, the surface wave velocity is not sensitive to the CO2 layer physical parameter variations,especially for a thin CO2 geological storage layer in a deep underground reservoir.展开更多
Passive surface-wave utilization has been intensively studied as a means of compensating for the short-age of low-frequency information in active surface-wave measurement, In general, passive surface-wave methods cann...Passive surface-wave utilization has been intensively studied as a means of compensating for the short-age of low-frequency information in active surface-wave measurement, In general, passive surface-wave methods cannot provide phase velocities up to several tens of hertz; thus, active surface-wave methods are often required in order to increase the frequency range, To reduce the amount of field work, we pro-pose a strategy for a high-frequency passive surface-wave survey that imposes active sources during con-tinuous passive surface-wave observation; we call our strategy ＂mixed-source surface-wave （MSW） measurement,＂ Short-duration （within 10 min） passive surface waves and mixed-source surface waves were recorded at three sites with different noise levels： namely, inside a school, along a road, and along a railway, Spectral analysis indicates that the high-frequency energy is improved by imposing active sources during continuous passive surface-wave observation, The spatial autocorrelation （SPAC） method and the multichannel analysis of passive surface waves （MAPS） method based on cross-correlations were performed on the recorded time sequences, The results demonstrate the flexibility and applicability of the proposed method for high-frequency phase velocity analysis, We suggest that it will be constructive to perform MSW measurement in a seismic investigation, rather than exclusively performing either active surface-wave measurement or passive surface-wave measurement,展开更多
based on optimal design on the core element of the sensor,a wireless and passive surface acoustic wave（SAW）temperature sensor integrated with ID Tag was presented.A reflective delay line,which consists of a transduc...based on optimal design on the core element of the sensor,a wireless and passive surface acoustic wave（SAW）temperature sensor integrated with ID Tag was presented.A reflective delay line,which consists of a transducer and eight reflectors on YZ LiNbO3 substrate.Was fabricated as the sensor element,in which,three reflectors were used for temperature sensing,and the other five were for the ID Tag using phase encoding.Single phase unidirectional transducers（SPUDTs）and shorted grating were used to structure the sAW device,leading to excellent signal to noise ratio（SNR）.The performance of the SAW device was simulated by the coupling of modes（COM）prior to fabrication.Using the network analyzer,the response in time domain of the fabricated 434 MHz SAW sensor was characterized,the measured S11 agrees well with the simulated one,sharp reflection peaks,high signal/noise,and low spurious noise between the reflection peaks were observed.Using the radar system based on FSCW as the reader unit.the developed SAW temperature sensors were evaluated wirelessly.Excellent1 inearity and good resolution of士1℃ were observed.展开更多
基金the financial supports from the State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology (No. SKLGDUEK1002)the Fundamental Research Funds for the Central Government Supported Universities of Tongji University, China (No. 0270219037)
文摘Carbon dioxide （CO2） capture and geological storage （CCS） is one of promising technologies for greenhouse gas effect mitigation. Many geotechnical challenges remain during carbon dioxide storage field practices, among which effectively detecting CO2 from deep underground is one of engineering problems. This paper reviews monitoring techniques currently used during CO2 injection and storage. A method developed based on measuring seismic microtremors is of main interest. This method was first successfully used to characterize a site in this paper. To explore its feasibility in C02 storage monitoring, numerical simulations were conducted to investigate detectable changes in elastic wave signatures due to injection and geological storage of CO2. It is found that, although it is effective for shallow earth profile estimation, the surface wave velocity is not sensitive to the CO2 layer physical parameter variations,especially for a thin CO2 geological storage layer in a deep underground reservoir.
文摘Passive surface-wave utilization has been intensively studied as a means of compensating for the short-age of low-frequency information in active surface-wave measurement, In general, passive surface-wave methods cannot provide phase velocities up to several tens of hertz; thus, active surface-wave methods are often required in order to increase the frequency range, To reduce the amount of field work, we pro-pose a strategy for a high-frequency passive surface-wave survey that imposes active sources during con-tinuous passive surface-wave observation; we call our strategy ＂mixed-source surface-wave （MSW） measurement,＂ Short-duration （within 10 min） passive surface waves and mixed-source surface waves were recorded at three sites with different noise levels： namely, inside a school, along a road, and along a railway, Spectral analysis indicates that the high-frequency energy is improved by imposing active sources during continuous passive surface-wave observation, The spatial autocorrelation （SPAC） method and the multichannel analysis of passive surface waves （MAPS） method based on cross-correlations were performed on the recorded time sequences, The results demonstrate the flexibility and applicability of the proposed method for high-frequency phase velocity analysis, We suggest that it will be constructive to perform MSW measurement in a seismic investigation, rather than exclusively performing either active surface-wave measurement or passive surface-wave measurement,
基金supported by the National Nature Science Foundation of China(11074268,10834010)
文摘based on optimal design on the core element of the sensor,a wireless and passive surface acoustic wave（SAW）temperature sensor integrated with ID Tag was presented.A reflective delay line,which consists of a transducer and eight reflectors on YZ LiNbO3 substrate.Was fabricated as the sensor element,in which,three reflectors were used for temperature sensing,and the other five were for the ID Tag using phase encoding.Single phase unidirectional transducers（SPUDTs）and shorted grating were used to structure the sAW device,leading to excellent signal to noise ratio（SNR）.The performance of the SAW device was simulated by the coupling of modes（COM）prior to fabrication.Using the network analyzer,the response in time domain of the fabricated 434 MHz SAW sensor was characterized,the measured S11 agrees well with the simulated one,sharp reflection peaks,high signal/noise,and low spurious noise between the reflection peaks were observed.Using the radar system based on FSCW as the reader unit.the developed SAW temperature sensors were evaluated wirelessly.Excellent1 inearity and good resolution of士1℃ were observed.
