Detecting plant health conditions plays a key role in farm pest management and crop protection.In this study,measurement of hyperspectral leaf reflectance in rice crop(Oryzasativa L.)was conducted on groups of healthy...Detecting plant health conditions plays a key role in farm pest management and crop protection.In this study,measurement of hyperspectral leaf reflectance in rice crop(Oryzasativa L.)was conducted on groups of healthy and infected leaves by the fungus Bipolaris oryzae(Helminthosporium oryzae Breda.de Hann)through the wavelength range from 350 to 2500 nm.The percentage of leaf surface lesions was estimated and defined as the disease severity.Statistical methods like multiple stepwise regression,principal component analysis and partial least-square regression were utilized to calculate and estimate the disease severity of rice brown spot at the leaf level.Our results revealed that multiple stepwise linear regressions could efficiently estimate disease severity with three wavebands in seven steps.The root mean square errors(RMSEs)for training(n=210)and testing(n=53)dataset were 6.5%and 5.8%,respectively.Principal component analysis showed that the first principal component could explain approximately 80%of the variance of the original hyperspectral reflectance.The regression model with the first two principal components predicted a disease severity with RMSEs of 16.3%and 13.9%for the training and testing dataset,respec-tively.Partial least-square regression with seven extracted factors could most effectively predict disease severity compared with other statistical methods with RMSEs of 4.1%and 2.0%for the training and testing dataset,respectively.Our research demon-strates that it is feasible to estimate the disease severity of rice brown spot using hyperspectral reflectance data at the leaf level.展开更多
Rapid and sensitive recognition of herbal pieces according to different concocted processing is crucial to quality control and pharmaceutical effect. Near-infrared （NIR） and mid-infrared （MIR） technology combined ...Rapid and sensitive recognition of herbal pieces according to different concocted processing is crucial to quality control and pharmaceutical effect. Near-infrared （NIR） and mid-infrared （MIR） technology combined with supervised pattern recognition based on partial least-squares discriminant analysis （PLSDA） was attempted to classify and recognize six different concocted processing pieces of 600 Areca catechu L. samples and the influence of fingerprint information preprocessing methods on recognition performance was also investigated in this work. Recognition rates of 99.24%, 100% and 99.49% for original fingerprint, multiple scatter correct （MSC） fingerprint and second derivative （2nd derivative） fingerprint of NIR spectra were achieved by PLSDA models, respectively. Meanwhile, a perfect recognition rate of 100% was obtained for the above three fingerprint models of MIR spectra. In conclusion, PLSDA can rapidly and effectively extract otherness of fingerprint information from NIR and MIR spectra to identify different concocted herbal pieces ofA. catechu.展开更多
In several LUCC studies, statistical methods are being used to analyze land use data. A problem using conventional statistical methods in land use analysis is that these methods assume the data to be statistically ind...In several LUCC studies, statistical methods are being used to analyze land use data. A problem using conventional statistical methods in land use analysis is that these methods assume the data to be statistically independent. But in fact, they have the tendency to be dependent, a phenomenon known as multicollinearity, especially in the cases of few observations. In this paper, a Partial Least-Squares （PLS） regression approach is developed to study relationships between land use and its influencing factors through a case study of the Suzhou-Wuxi-Changzhou region in China. Multicollinearity exists in the dataset and the number of variables is high compared to the number of observations. Four PLS factors are selected through a preliminary analysis. The correlation analyses between land use and influencing factors demonstrate the land use character of rural industrialization and urbanization in the Suzhou-Wuxi-Changzhou region, meanwhile illustrate that the first PLS factor has enough ability to best describe land use patterns quantitatively, and most of the statistical relations derived from it accord with the fact. By the decreasing capacity of the PLS factors, the reliability of model outcome decreases correspondingly.展开更多
The UV absorption spectra of o-naphthol,α-naphthylamine,2,7-dihydroxy naphthalene,2,4-dimethoxy ben- zaldehyde and methyl salicylate,overlap severely;therefore it is impossible to determine them in mixtures by tradit...The UV absorption spectra of o-naphthol,α-naphthylamine,2,7-dihydroxy naphthalene,2,4-dimethoxy ben- zaldehyde and methyl salicylate,overlap severely;therefore it is impossible to determine them in mixtures by traditional spectrophotometric methods.In this paper,the partial least-squares(PLS)regression is applied to the simultaneous determination of these compounds in mixtures by UV spectrophtometry without any pretreatment of the samples.Ten synthetic mixture samples are analyzed by the proposed method.The mean recoveries are 99.4%,996%,100.2%,99.3% and 99.1%,and the relative standard deviations(RSD) are 1.87%,1.98%,1.94%,0.960% and 0.672%,respectively.展开更多
This study used near-infrared(NIR)spectroscopy to predict mechanical properties of wood.NIR spectra were collected in wavelengths 900–1700 nm,and spectra averaged by radial and tangential surface spectra were used to...This study used near-infrared(NIR)spectroscopy to predict mechanical properties of wood.NIR spectra were collected in wavelengths 900–1700 nm,and spectra averaged by radial and tangential surface spectra were used to establish a partial least square(PLS)model based on correlation local embedding(CLE).Mongolian oak(Quercus mongolica Fisch.ex Ledeb.)was used to test the eff ectiveness of the model.The cross-validation method was used to verify the robustness of the CLE–PLS model.Ninety samples were tested as the calibration set and forty-fi ve as the validation set.The results show that the prediction coeffi cient of determination(R2 p)is 0.80 for MOR,and 0.78 for MOE.The ratio of performance to deviation is 2.23 for MOR and 2.15 for MOE.展开更多
Scientific forecasting water yield of mine is of great significance to the safety production of mine and the colligated using of water resources. The paper established the forecasting model for water yield of mine, co...Scientific forecasting water yield of mine is of great significance to the safety production of mine and the colligated using of water resources. The paper established the forecasting model for water yield of mine, combining neural network with the partial least square method. Dealt with independent variables by the partial least square method, it can not only solve the relationship between independent variables but also reduce the input dimensions in neural network model, and then use the neural network which can solve the non-linear problem better. The result of an example shows that the prediction has higher precision in forecasting and fitting.展开更多
Simultaneous determination of heavy metal cations and accurate quantitative prediction of them are of great interest in analytical chemistry.This work has focused on a comprehensive comparison of partial least squares...Simultaneous determination of heavy metal cations and accurate quantitative prediction of them are of great interest in analytical chemistry.This work has focused on a comprehensive comparison of partial least squares(PLS-1)and artificial neural networks(ANN)as two types of chemometric methods.For this purpose,aluminum,iron and copper were studied as three analytes whose UV-Vis absorption spectra highly overlap each other.Accordance with determined parameters(ligand concentration,pH,waiting times,the relationship between absorbance and concentration of metal ion effect and foreign ions)are provided and the optimum conditions.After establishing the optimum conditions for Fe^(3+),Al^(3+) and Cu^(2+) containing mixtures spectrophotometric determinations and the data calibration method of least squares(PLS-1)regression,and artificial neural network(ANN)methods were used.Chemometric methods are applied in a fast,simple,and the results are applicable.展开更多
During the course of calculating the rice evapotranspiration using weather factors,we often find that some independent variables have multiple correlation.The phenomena can lead to the traditional multivariate regress...During the course of calculating the rice evapotranspiration using weather factors,we often find that some independent variables have multiple correlation.The phenomena can lead to the traditional multivariate regression model which based on least square method distortion.And the stability of the model will be lost.The model will be built based on partial least square regression in the paper,through applying the idea of main component analyze and typical correlation analyze,the writer picks up some component from original material.Thus,the writer builds up the model of rice evapotranspiration to solve the multiple correlation among the independent variables (some weather factors).At last,the writer analyses the model in some parts,and gains the satisfied result.展开更多
The numerical dispersion phenomenon in the finite-difference forward modeling simulations of the wave equation significantly affects the imaging accuracy in acoustic reflection logging.This issue is particularly prono...The numerical dispersion phenomenon in the finite-difference forward modeling simulations of the wave equation significantly affects the imaging accuracy in acoustic reflection logging.This issue is particularly pronounced in the reverse time migration(RTM)method used for shear-wave(S-wave)logging imaging.This not only affects imaging accuracy but also introduces ambiguities in the interpretation of logging results.To address this challenge,this study proposes the use of a least-squares difference coefficient optimization algorithm aiming to suppress the numerical dispersion phenomenon in the RTM of S-wave reflection imaging logging.By optimizing the difference coefficients,the high-precision finite-difference algorithm serves as an effective operator for both forward and backward RTM processes.This approach is instrumental in eliminating migration illusions,which are often caused by numerical dispersion.The effectiveness of this optimized algorithm is demonstrated through numerical results,which indicate that it can achieve more accurate forward imaging results across various conditions,including high-and low-velocity strata,and is effective in both large and small spatial grids.The results of processing real data demonstrate that numerical dispersion optimization effectively reduces migration artifacts and diminishes ambiguities in logging interpretations.This optimization offers crucial technical support to the RTM method,enhancing its capability for accurately modeling and imaging S-wave reflections.展开更多
This study explored the application value of iterative decomposition of water and fatwith echo asymmetry and least-squares estimation(IDEAL-IQ)technology in the early diagnosis of ageing osteoporosis(OP).172 participa...This study explored the application value of iterative decomposition of water and fatwith echo asymmetry and least-squares estimation(IDEAL-IQ)technology in the early diagnosis of ageing osteoporosis(OP).172 participants were enrolled and underwentmagnetic resonance imaging(MRI)examinations on a 3.0T scanner.100 cases were included in the normal group(50 males and 50 females;mean age:45 years;age range:20e84 years).33 cases were included in the osteopenia group(17 males and 16 females;mean age:55 years;age range:43e83 years).39 caseswere includedintheOP group(19males and20females;meanage:58years;age range:48 e82 years).Conventional T1WI and T2WI were first obtained,followed by 3D-IDEAL-IQ-acqui-sition.Fat fraction(FF)and apparent transverse relaxation rate(R2*)resultswere automatically calculated from IDEAL-IQ-images on the console.Based on T1Wand T2W-images,300 ROIs for each participantweremanually delineated in L1-L5 vertebral bodies of five middle slices.In each age group of all normal subjects,each parameter was significantly correlated with gender.In male participants from the normal,osteopenia,and OP groups,statistical analysis revealed F values of 11319.292 and 180.130 for comparisons involving FF and R2*values,respectively(all p<0.0001).The sensitivity and specificity of FF values were 0.906 and 0.950,0.994 and 0.997,0.865 and 0.820,respectively.For R2*,they were 0.665 and 0.616,0.563 and 0.519,0.571 and 0.368,respectively.In female participants from the normal,osteopenia,and OP-groups,statis-tical analysis revealed F values of 12461.658 and 548.274 for comparisons involving FF and R2*values,respectively(all p<0.0001).The sensitivity and specificity of FF values were 0.985 and 0.991,0.996 and 0.996,0.581 and 0.678,respectively.For R2*,they were 0.698 and 0.730,0.603 and 0.665,0.622 and 0.525,respectively.Significant differences were indicated in the quanti-tative values among the three groups.FF value had good performance,while R2*value had poor performance indiscriminatingosteopenia andOP-groups.Overall,the IDEAL-IQ techniqueoffers specific reference indices that enable noninvasive and quantitative assessment of lumbar vertebrae bone metabolism,thereby providing diagnostic information for OP.展开更多
This research proposes an improved Puma optimization algorithm(IPuma)as a novel dynamic recon-figuration tool for a photovoltaic(PV)array linked in total-cross-tied(TCT).The proposed algorithm utilizes the Newton-Raph...This research proposes an improved Puma optimization algorithm(IPuma)as a novel dynamic recon-figuration tool for a photovoltaic(PV)array linked in total-cross-tied(TCT).The proposed algorithm utilizes the Newton-Raphson search rule(NRSR)to boost the exploration process,especially in search spaces with more local regions,and boost the exploitation with adaptive parameters alternating with random parameters in the original Puma.The effectiveness of the introduced IPuma is confirmed through comprehensive evaluations on the CEC’20 benchmark problems.It shows superior performance compared to both established and modern metaheuristic algorithms in terms of effectively navigating the search space and achieving convergence towards near-optimal regions.The findings indicated that the IPuma algorithm demonstrates considerable statistical promise and surpasses the performance of competing algorithms.In addition,the proposed IPuma is utilized to reconfigure a 9×9 PV array that operates under different shade patterns,such as lower triangular(LT),long wide(LW),and short wide(SW).In addition to other programmed approaches,such as the Whale optimization algorithm(WOA),grey wolf optimizer(GWO),Harris Hawks optimization(HHO),particle swarm optimization(PSO),gravitational search algorithm(GSA),biogeography-based optimization(BBO),sine cosine algorithm(SCA),equilibrium optimizer(EO),and original Puma,the indicated method is contrasted to the traditional configurations of TCT and Sudoku.In addition,the metrics of mismatch power loss,maximum efficiency improvement,efficiency improvement ratio,and peak-to-mean ratio are calculated to assess the effectiveness of the indicated approach.The proposed IPuma improved the generated power by 36.72%,28.03%,and 40.97%for SW,LW,and LT,respectively,outperforming the TCT configuration.In addition,it achieved the best maximum efficiency improvement among the algorithms considered,with 26.86%,21.89%,and 29.07%for the examined patterns.The results highlight the superiority and competence of the proposed approach in both convergence rates and stability,as well as applicability to dynamically reconfigure the PV system and enhance its harvested energy.展开更多
Partial least squares (PLS) model maximizes the covariance between process variables and quality variables,making it widely used in quality-related fault detection.However,traditional PLS methods focus primarily on li...Partial least squares (PLS) model maximizes the covariance between process variables and quality variables,making it widely used in quality-related fault detection.However,traditional PLS methods focus primarily on linear processes,leading to poor performance in dynamic nonlinear processes.In this paper,a novel quality-related fault detection method,named DiCAE-PLS,is developed by combining dynamic-inner convolutional autoencoder with PLS.In the proposed DiCAE-PLS method,latent features are first extracted through dynamic-inner convolutional autoencoder (DiCAE) to capture process dynamics and nonlinearity from process variables.Then,a PLS model is established to build the relationship between the extracted latent features and the final product quality.To detect quality-related faults,Hotelling's T^(2) statistic is employed.The developed quality-related fault detection is applied to the widely used industrial benchmark of the Tennessee.展开更多
Oral squamous cell carcinoma(OSCC)is a prevalent malignancy with high morbidity and mortality.Globally,about 400000 people are affected,often with a poor quality of life.Its high mortality is mainly due to its aggress...Oral squamous cell carcinoma(OSCC)is a prevalent malignancy with high morbidity and mortality.Globally,about 400000 people are affected,often with a poor quality of life.Its high mortality is mainly due to its aggressive growth and tendency to spread.Epithelial-mesenchymal transition(EMT)is a central regulatory hub driving tumor cell migration and invasion by enabling changes in cell characteristics.During EMT,epithelial cells gradually take on mesenchymal traits,gaining mobility and spreading mo re easily.Recent multi-omics studies show that many cancer cells exist in a hybrid or partial-EMT state,which lies between the full epithelial and mesenchymal forms.Cells in this state are especially invasive and metastatic,with high plasticity that promotes tumor progression.This review summarizes the role of partial-EMT in OSCC,with a focus on how it alters the tumor microenvironment(TME),promotes invasion and metastasis,and influences cancer stem cells(CSCs).We also highlight the link between partial-EMT and treatment resistance in OSCC.Based on these insights,we discuss therapeutic strategies targeting partial-EMT to improve outcomes.Targeting partial-EMT may offer promising strategies to enhance treatment effectiveness and improve patient survival and quality of life.展开更多
Simultaneous-source acquisition has been recog- nized as an economic and efficient acquisition method, but the direct imaging of the simultaneous-source data produces migration artifacts because of the interference of...Simultaneous-source acquisition has been recog- nized as an economic and efficient acquisition method, but the direct imaging of the simultaneous-source data produces migration artifacts because of the interference of adjacent sources. To overcome this problem, we propose the regularized least-squares reverse time migration method （RLSRTM） using the singular spectrum analysis technique that imposes sparseness constraints on the inverted model. Additionally, the difference spectrum theory of singular values is presented so that RLSRTM can be implemented adaptively to eliminate the migration artifacts. With numerical tests on a fiat layer model and a Marmousi model, we validate the superior imaging quality, efficiency and convergence of RLSRTM compared with LSRTM when dealing with simultaneoussource data, incomplete data and noisy data.展开更多
We present a method based on least-squares reverse time migration with plane-wave encoding （P-LSRTM） for rugged topography. Instead of modifying the wave field before migration, we modify the plane-wave encoding fun...We present a method based on least-squares reverse time migration with plane-wave encoding （P-LSRTM） for rugged topography. Instead of modifying the wave field before migration, we modify the plane-wave encoding function and fill constant velocity to the area above rugged topography in the model so that P-LSRTM can be directly performed from rugged surface in the way same to shot domain reverse time migration. In order to improve efficiency and reduce I/O （input/output） cost, the dynamic en- coding strategy and hybrid encoding strategy are implemented. Numerical test on SEG rugged topography model show that P-LSRTM can suppress migration artifacts in the migration image, and compensate am- plitude in the middle-deep part efficiently. Without data correction, P-LSRTM can produce a satisfying image of near-surface if we could get an accurate near-surface velocity model. Moreover, the pre-stack P- LSRTM is more robust than conventional RTM in the presence of migration velocity errors.展开更多
To obtain higher accurate position estimates, the stochastic model is estimated by using residual of observations, hence, the stochastic model describes the noise and bias in measurements more realistically. By using ...To obtain higher accurate position estimates, the stochastic model is estimated by using residual of observations, hence, the stochastic model describes the noise and bias in measurements more realistically. By using GPS data and broadcast ephemeris, the numerical results indicating the accurate position estimates at sub-meter level are obtainable.展开更多
The meshless weighted least-square (MWLS) method was developed based on the weighted least-square method. The method possesses several advantages, such as high accuracy, high stability and high e?ciency. Moreover, t...The meshless weighted least-square (MWLS) method was developed based on the weighted least-square method. The method possesses several advantages, such as high accuracy, high stability and high e?ciency. Moreover, the coe?cient matrix obtained is symmetric and semi- positive de?nite. In this paper, the method is further examined critically. The e?ects of several parameters on the results of MWLS are investigated systematically by using a cantilever beam and an in?nite plate with a central circular hole. The numerical results are compared with those obtained by using the collocation-based meshless method (CBMM) and Galerkin-based meshless method (GBMM). The investigated parameters include the type of approximations, the type of weight functions, the number of neighbors of an evaluation point, as well as the manner in which the neighbors of an evaluation point are determined. This study shows that the displacement accuracy and convergence rate obtained by MWLS is comparable to that of the GBMM while the stress accuracy and convergence rate yielded by MWLS is even higher than that of GBMM. Furthermore, MWLS is much more e?cient than GBMM. This study also shows that the instability of CBMM is mainly due to the neglect of the equi- librium residuals at boundary nodes. In MWLS, the residuals of all the governing equations are minimized in a weighted least-square sense.展开更多
A linear-correction least-squares（LCLS） estimation procedure is proposed for geolocation using frequency difference of arrival （FDOA） measurements only. We first analyze the measurements of FDOA, and further deriv...A linear-correction least-squares（LCLS） estimation procedure is proposed for geolocation using frequency difference of arrival （FDOA） measurements only. We first analyze the measurements of FDOA, and further derive the Cramer-Rao lower bound （CRLB） of geoloeation using FDOA measurements. For the localization model is a nonlinear least squares（LS） estimator with a nonlinear constrained, a linearizing method is used to convert the model to a linear least squares estimator with a nonlinear con- strained. The Gauss-Newton iteration method is developed to conquer the source localization problem. From the analysis of solving Lagrange multiplier, the algorithm is a generalization of linear-correction least squares estimation procedure under the condition of geolocation using FDOA measurements only. The algorithm is compared with common least squares estimation. Comparisons of their estimation accuracy and the CRLB are made, and the proposed method attains the CRLB. Simulation re- sults are included to corroborate the theoretical development.展开更多
Mixed-weight least-squares (MWLS) predictive control algorithm, compared with quadratic programming (QP) method, has the advantages of reducing the computer burden, quick calculation speed and dealing with the case in...Mixed-weight least-squares (MWLS) predictive control algorithm, compared with quadratic programming (QP) method, has the advantages of reducing the computer burden, quick calculation speed and dealing with the case in which the optimization is infeasible. But it can only deal with soft constraints. In order to deal with hard constraints and guarantee feasibility, an improved algorithm is proposed by recalculating the setpoint according to the hard constraints before calculating the manipulated variable and MWLS algorithm is used to satisfy the requirement of soft constraints for the system with the input constraints and output constraints. The algorithm can not only guarantee stability of the system and zero steady state error, but also satisfy the hard constraints of input and output variables. The simulation results show the improved algorithm is feasible and effective.展开更多
基金the Hi-Tech Research and Development Program(863)of China(No.2006AA10Z203)the National Scienceand Technology Task Force Project(No.2006BAD10A01),China
文摘Detecting plant health conditions plays a key role in farm pest management and crop protection.In this study,measurement of hyperspectral leaf reflectance in rice crop(Oryzasativa L.)was conducted on groups of healthy and infected leaves by the fungus Bipolaris oryzae(Helminthosporium oryzae Breda.de Hann)through the wavelength range from 350 to 2500 nm.The percentage of leaf surface lesions was estimated and defined as the disease severity.Statistical methods like multiple stepwise regression,principal component analysis and partial least-square regression were utilized to calculate and estimate the disease severity of rice brown spot at the leaf level.Our results revealed that multiple stepwise linear regressions could efficiently estimate disease severity with three wavebands in seven steps.The root mean square errors(RMSEs)for training(n=210)and testing(n=53)dataset were 6.5%and 5.8%,respectively.Principal component analysis showed that the first principal component could explain approximately 80%of the variance of the original hyperspectral reflectance.The regression model with the first two principal components predicted a disease severity with RMSEs of 16.3%and 13.9%for the training and testing dataset,respec-tively.Partial least-square regression with seven extracted factors could most effectively predict disease severity compared with other statistical methods with RMSEs of 4.1%and 2.0%for the training and testing dataset,respectively.Our research demon-strates that it is feasible to estimate the disease severity of rice brown spot using hyperspectral reflectance data at the leaf level.
基金supported by the National Natural Science Foundation of China(Nos.21205145,21276006,21036009)the Open Funds of State Key Laboratory of Chemo/Biosensing and Chemometrics of Hunan University(No.201111)+1 种基金the Special Fund for Basic Scientific Research of Central Colleges,South-Central University for Nationalities(Nos.CZZ10005 and CZQ11012)the 'Five-twelfth' National Science and Technology Support Program (No.2012BAI27B00)
文摘Rapid and sensitive recognition of herbal pieces according to different concocted processing is crucial to quality control and pharmaceutical effect. Near-infrared （NIR） and mid-infrared （MIR） technology combined with supervised pattern recognition based on partial least-squares discriminant analysis （PLSDA） was attempted to classify and recognize six different concocted processing pieces of 600 Areca catechu L. samples and the influence of fingerprint information preprocessing methods on recognition performance was also investigated in this work. Recognition rates of 99.24%, 100% and 99.49% for original fingerprint, multiple scatter correct （MSC） fingerprint and second derivative （2nd derivative） fingerprint of NIR spectra were achieved by PLSDA models, respectively. Meanwhile, a perfect recognition rate of 100% was obtained for the above three fingerprint models of MIR spectra. In conclusion, PLSDA can rapidly and effectively extract otherness of fingerprint information from NIR and MIR spectra to identify different concocted herbal pieces ofA. catechu.
基金National Natural Science Foundation of China No.40301038
文摘In several LUCC studies, statistical methods are being used to analyze land use data. A problem using conventional statistical methods in land use analysis is that these methods assume the data to be statistically independent. But in fact, they have the tendency to be dependent, a phenomenon known as multicollinearity, especially in the cases of few observations. In this paper, a Partial Least-Squares （PLS） regression approach is developed to study relationships between land use and its influencing factors through a case study of the Suzhou-Wuxi-Changzhou region in China. Multicollinearity exists in the dataset and the number of variables is high compared to the number of observations. Four PLS factors are selected through a preliminary analysis. The correlation analyses between land use and influencing factors demonstrate the land use character of rural industrialization and urbanization in the Suzhou-Wuxi-Changzhou region, meanwhile illustrate that the first PLS factor has enough ability to best describe land use patterns quantitatively, and most of the statistical relations derived from it accord with the fact. By the decreasing capacity of the PLS factors, the reliability of model outcome decreases correspondingly.
文摘The UV absorption spectra of o-naphthol,α-naphthylamine,2,7-dihydroxy naphthalene,2,4-dimethoxy ben- zaldehyde and methyl salicylate,overlap severely;therefore it is impossible to determine them in mixtures by traditional spectrophotometric methods.In this paper,the partial least-squares(PLS)regression is applied to the simultaneous determination of these compounds in mixtures by UV spectrophtometry without any pretreatment of the samples.Ten synthetic mixture samples are analyzed by the proposed method.The mean recoveries are 99.4%,996%,100.2%,99.3% and 99.1%,and the relative standard deviations(RSD) are 1.87%,1.98%,1.94%,0.960% and 0.672%,respectively.
基金financially supported by the China State Forestry Administration“948”projects(2015-4-52)Fundamental Research Funds for the Central Universities(2572017DB05)Heilongjiang Natural Science Foundation(C2017005)。
文摘This study used near-infrared(NIR)spectroscopy to predict mechanical properties of wood.NIR spectra were collected in wavelengths 900–1700 nm,and spectra averaged by radial and tangential surface spectra were used to establish a partial least square(PLS)model based on correlation local embedding(CLE).Mongolian oak(Quercus mongolica Fisch.ex Ledeb.)was used to test the eff ectiveness of the model.The cross-validation method was used to verify the robustness of the CLE–PLS model.Ninety samples were tested as the calibration set and forty-fi ve as the validation set.The results show that the prediction coeffi cient of determination(R2 p)is 0.80 for MOR,and 0.78 for MOE.The ratio of performance to deviation is 2.23 for MOR and 2.15 for MOE.
基金Supported by "863" Program of P. R. China(2002AA2Z4291)
文摘Scientific forecasting water yield of mine is of great significance to the safety production of mine and the colligated using of water resources. The paper established the forecasting model for water yield of mine, combining neural network with the partial least square method. Dealt with independent variables by the partial least square method, it can not only solve the relationship between independent variables but also reduce the input dimensions in neural network model, and then use the neural network which can solve the non-linear problem better. The result of an example shows that the prediction has higher precision in forecasting and fitting.
文摘Simultaneous determination of heavy metal cations and accurate quantitative prediction of them are of great interest in analytical chemistry.This work has focused on a comprehensive comparison of partial least squares(PLS-1)and artificial neural networks(ANN)as two types of chemometric methods.For this purpose,aluminum,iron and copper were studied as three analytes whose UV-Vis absorption spectra highly overlap each other.Accordance with determined parameters(ligand concentration,pH,waiting times,the relationship between absorbance and concentration of metal ion effect and foreign ions)are provided and the optimum conditions.After establishing the optimum conditions for Fe^(3+),Al^(3+) and Cu^(2+) containing mixtures spectrophotometric determinations and the data calibration method of least squares(PLS-1)regression,and artificial neural network(ANN)methods were used.Chemometric methods are applied in a fast,simple,and the results are applicable.
文摘During the course of calculating the rice evapotranspiration using weather factors,we often find that some independent variables have multiple correlation.The phenomena can lead to the traditional multivariate regression model which based on least square method distortion.And the stability of the model will be lost.The model will be built based on partial least square regression in the paper,through applying the idea of main component analyze and typical correlation analyze,the writer picks up some component from original material.Thus,the writer builds up the model of rice evapotranspiration to solve the multiple correlation among the independent variables (some weather factors).At last,the writer analyses the model in some parts,and gains the satisfied result.
基金supported by Scientific Research and Technology Development Project of CNPC(2021DJ4002,2022DJ3908).
文摘The numerical dispersion phenomenon in the finite-difference forward modeling simulations of the wave equation significantly affects the imaging accuracy in acoustic reflection logging.This issue is particularly pronounced in the reverse time migration(RTM)method used for shear-wave(S-wave)logging imaging.This not only affects imaging accuracy but also introduces ambiguities in the interpretation of logging results.To address this challenge,this study proposes the use of a least-squares difference coefficient optimization algorithm aiming to suppress the numerical dispersion phenomenon in the RTM of S-wave reflection imaging logging.By optimizing the difference coefficients,the high-precision finite-difference algorithm serves as an effective operator for both forward and backward RTM processes.This approach is instrumental in eliminating migration illusions,which are often caused by numerical dispersion.The effectiveness of this optimized algorithm is demonstrated through numerical results,which indicate that it can achieve more accurate forward imaging results across various conditions,including high-and low-velocity strata,and is effective in both large and small spatial grids.The results of processing real data demonstrate that numerical dispersion optimization effectively reduces migration artifacts and diminishes ambiguities in logging interpretations.This optimization offers crucial technical support to the RTM method,enhancing its capability for accurately modeling and imaging S-wave reflections.
基金supported by the Planned Project Grant(Grant No.3502Z20199064)from the Science and Technology Bureau of Xiamen(CN)the training project(Grant No.2020GGB067)of the youth and middle-aged talents of Fujian Provincial Health Commission(CN).
文摘This study explored the application value of iterative decomposition of water and fatwith echo asymmetry and least-squares estimation(IDEAL-IQ)technology in the early diagnosis of ageing osteoporosis(OP).172 participants were enrolled and underwentmagnetic resonance imaging(MRI)examinations on a 3.0T scanner.100 cases were included in the normal group(50 males and 50 females;mean age:45 years;age range:20e84 years).33 cases were included in the osteopenia group(17 males and 16 females;mean age:55 years;age range:43e83 years).39 caseswere includedintheOP group(19males and20females;meanage:58years;age range:48 e82 years).Conventional T1WI and T2WI were first obtained,followed by 3D-IDEAL-IQ-acqui-sition.Fat fraction(FF)and apparent transverse relaxation rate(R2*)resultswere automatically calculated from IDEAL-IQ-images on the console.Based on T1Wand T2W-images,300 ROIs for each participantweremanually delineated in L1-L5 vertebral bodies of five middle slices.In each age group of all normal subjects,each parameter was significantly correlated with gender.In male participants from the normal,osteopenia,and OP groups,statistical analysis revealed F values of 11319.292 and 180.130 for comparisons involving FF and R2*values,respectively(all p<0.0001).The sensitivity and specificity of FF values were 0.906 and 0.950,0.994 and 0.997,0.865 and 0.820,respectively.For R2*,they were 0.665 and 0.616,0.563 and 0.519,0.571 and 0.368,respectively.In female participants from the normal,osteopenia,and OP-groups,statis-tical analysis revealed F values of 12461.658 and 548.274 for comparisons involving FF and R2*values,respectively(all p<0.0001).The sensitivity and specificity of FF values were 0.985 and 0.991,0.996 and 0.996,0.581 and 0.678,respectively.For R2*,they were 0.698 and 0.730,0.603 and 0.665,0.622 and 0.525,respectively.Significant differences were indicated in the quanti-tative values among the three groups.FF value had good performance,while R2*value had poor performance indiscriminatingosteopenia andOP-groups.Overall,the IDEAL-IQ techniqueoffers specific reference indices that enable noninvasive and quantitative assessment of lumbar vertebrae bone metabolism,thereby providing diagnostic information for OP.
基金funded by the Deanship of Scientific Research and Libraries,Princess Nourah bint Abdulrahman University,through the Program of Research Project Funding After Publication,grant No.(RPFAP-82-1445)。
文摘This research proposes an improved Puma optimization algorithm(IPuma)as a novel dynamic recon-figuration tool for a photovoltaic(PV)array linked in total-cross-tied(TCT).The proposed algorithm utilizes the Newton-Raphson search rule(NRSR)to boost the exploration process,especially in search spaces with more local regions,and boost the exploitation with adaptive parameters alternating with random parameters in the original Puma.The effectiveness of the introduced IPuma is confirmed through comprehensive evaluations on the CEC’20 benchmark problems.It shows superior performance compared to both established and modern metaheuristic algorithms in terms of effectively navigating the search space and achieving convergence towards near-optimal regions.The findings indicated that the IPuma algorithm demonstrates considerable statistical promise and surpasses the performance of competing algorithms.In addition,the proposed IPuma is utilized to reconfigure a 9×9 PV array that operates under different shade patterns,such as lower triangular(LT),long wide(LW),and short wide(SW).In addition to other programmed approaches,such as the Whale optimization algorithm(WOA),grey wolf optimizer(GWO),Harris Hawks optimization(HHO),particle swarm optimization(PSO),gravitational search algorithm(GSA),biogeography-based optimization(BBO),sine cosine algorithm(SCA),equilibrium optimizer(EO),and original Puma,the indicated method is contrasted to the traditional configurations of TCT and Sudoku.In addition,the metrics of mismatch power loss,maximum efficiency improvement,efficiency improvement ratio,and peak-to-mean ratio are calculated to assess the effectiveness of the indicated approach.The proposed IPuma improved the generated power by 36.72%,28.03%,and 40.97%for SW,LW,and LT,respectively,outperforming the TCT configuration.In addition,it achieved the best maximum efficiency improvement among the algorithms considered,with 26.86%,21.89%,and 29.07%for the examined patterns.The results highlight the superiority and competence of the proposed approach in both convergence rates and stability,as well as applicability to dynamically reconfigure the PV system and enhance its harvested energy.
基金supported in part by the National Natural Science Foundation of China(62573387)the Natural Science Foundation of Zhejiang province,China(LY24F030004)the Fundamental Research Funds of Zhejiang Sci-Tech University(25222139-Y).
文摘Partial least squares (PLS) model maximizes the covariance between process variables and quality variables,making it widely used in quality-related fault detection.However,traditional PLS methods focus primarily on linear processes,leading to poor performance in dynamic nonlinear processes.In this paper,a novel quality-related fault detection method,named DiCAE-PLS,is developed by combining dynamic-inner convolutional autoencoder with PLS.In the proposed DiCAE-PLS method,latent features are first extracted through dynamic-inner convolutional autoencoder (DiCAE) to capture process dynamics and nonlinearity from process variables.Then,a PLS model is established to build the relationship between the extracted latent features and the final product quality.To detect quality-related faults,Hotelling's T^(2) statistic is employed.The developed quality-related fault detection is applied to the widely used industrial benchmark of the Tennessee.
基金funded by JSPS KAKENHI to Y.K.(22K19629,22H03288,and 21KK0162)JSPS Program for Forming Japan's Peak Research Universities:J-PEAKS(JPJS00420240022)to Y.K.JST SPRING,Grant Number JPMJSP2113 to C.W.and C.S.
文摘Oral squamous cell carcinoma(OSCC)is a prevalent malignancy with high morbidity and mortality.Globally,about 400000 people are affected,often with a poor quality of life.Its high mortality is mainly due to its aggressive growth and tendency to spread.Epithelial-mesenchymal transition(EMT)is a central regulatory hub driving tumor cell migration and invasion by enabling changes in cell characteristics.During EMT,epithelial cells gradually take on mesenchymal traits,gaining mobility and spreading mo re easily.Recent multi-omics studies show that many cancer cells exist in a hybrid or partial-EMT state,which lies between the full epithelial and mesenchymal forms.Cells in this state are especially invasive and metastatic,with high plasticity that promotes tumor progression.This review summarizes the role of partial-EMT in OSCC,with a focus on how it alters the tumor microenvironment(TME),promotes invasion and metastasis,and influences cancer stem cells(CSCs).We also highlight the link between partial-EMT and treatment resistance in OSCC.Based on these insights,we discuss therapeutic strategies targeting partial-EMT to improve outcomes.Targeting partial-EMT may offer promising strategies to enhance treatment effectiveness and improve patient survival and quality of life.
基金financial support from the National Natural Science Foundation of China (Grant Nos. 41104069, 41274124)National Key Basic Research Program of China (973 Program) (Grant No. 2014CB239006)+2 种基金National Science and Technology Major Project (Grant No. 2011ZX05014-001-008)the Open Foundation of SINOPEC Key Laboratory of Geophysics (Grant No. 33550006-15-FW2099-0033)the Fundamental Research Funds for the Central Universities (Grant No. 16CX06046A)
文摘Simultaneous-source acquisition has been recog- nized as an economic and efficient acquisition method, but the direct imaging of the simultaneous-source data produces migration artifacts because of the interference of adjacent sources. To overcome this problem, we propose the regularized least-squares reverse time migration method （RLSRTM） using the singular spectrum analysis technique that imposes sparseness constraints on the inverted model. Additionally, the difference spectrum theory of singular values is presented so that RLSRTM can be implemented adaptively to eliminate the migration artifacts. With numerical tests on a fiat layer model and a Marmousi model, we validate the superior imaging quality, efficiency and convergence of RLSRTM compared with LSRTM when dealing with simultaneoussource data, incomplete data and noisy data.
基金jointly financial support of the National 973 Project of China(Nos.2014CB239006,2011CB202402)the National Natural Science Foundation of China(Nos.41104069,41274124)+1 种基金the Shandong Natural Science Foundation of China(No.ZR2011DQ016)the Fundamental Research Funds for the Central Universities of China(No.R1401005A)
文摘We present a method based on least-squares reverse time migration with plane-wave encoding （P-LSRTM） for rugged topography. Instead of modifying the wave field before migration, we modify the plane-wave encoding function and fill constant velocity to the area above rugged topography in the model so that P-LSRTM can be directly performed from rugged surface in the way same to shot domain reverse time migration. In order to improve efficiency and reduce I/O （input/output） cost, the dynamic en- coding strategy and hybrid encoding strategy are implemented. Numerical test on SEG rugged topography model show that P-LSRTM can suppress migration artifacts in the migration image, and compensate am- plitude in the middle-deep part efficiently. Without data correction, P-LSRTM can produce a satisfying image of near-surface if we could get an accurate near-surface velocity model. Moreover, the pre-stack P- LSRTM is more robust than conventional RTM in the presence of migration velocity errors.
基金Supported by the National 863 Program of China （No.2006AA12Z325） and the National Natural Science Foundation of China （No.40274005）.
文摘To obtain higher accurate position estimates, the stochastic model is estimated by using residual of observations, hence, the stochastic model describes the noise and bias in measurements more realistically. By using GPS data and broadcast ephemeris, the numerical results indicating the accurate position estimates at sub-meter level are obtainable.
基金Project supported by the National Natural Science Foundation of China (No.10172052).
文摘The meshless weighted least-square (MWLS) method was developed based on the weighted least-square method. The method possesses several advantages, such as high accuracy, high stability and high e?ciency. Moreover, the coe?cient matrix obtained is symmetric and semi- positive de?nite. In this paper, the method is further examined critically. The e?ects of several parameters on the results of MWLS are investigated systematically by using a cantilever beam and an in?nite plate with a central circular hole. The numerical results are compared with those obtained by using the collocation-based meshless method (CBMM) and Galerkin-based meshless method (GBMM). The investigated parameters include the type of approximations, the type of weight functions, the number of neighbors of an evaluation point, as well as the manner in which the neighbors of an evaluation point are determined. This study shows that the displacement accuracy and convergence rate obtained by MWLS is comparable to that of the GBMM while the stress accuracy and convergence rate yielded by MWLS is even higher than that of GBMM. Furthermore, MWLS is much more e?cient than GBMM. This study also shows that the instability of CBMM is mainly due to the neglect of the equi- librium residuals at boundary nodes. In MWLS, the residuals of all the governing equations are minimized in a weighted least-square sense.
基金National High-tech Research and Development Program of China (2011AA7072043)National Defense Key Laboratory Foundation of China (9140C860304)Innovation Fund of Graduate School of NUDT (B120406)
文摘A linear-correction least-squares（LCLS） estimation procedure is proposed for geolocation using frequency difference of arrival （FDOA） measurements only. We first analyze the measurements of FDOA, and further derive the Cramer-Rao lower bound （CRLB） of geoloeation using FDOA measurements. For the localization model is a nonlinear least squares（LS） estimator with a nonlinear constrained, a linearizing method is used to convert the model to a linear least squares estimator with a nonlinear con- strained. The Gauss-Newton iteration method is developed to conquer the source localization problem. From the analysis of solving Lagrange multiplier, the algorithm is a generalization of linear-correction least squares estimation procedure under the condition of geolocation using FDOA measurements only. The algorithm is compared with common least squares estimation. Comparisons of their estimation accuracy and the CRLB are made, and the proposed method attains the CRLB. Simulation re- sults are included to corroborate the theoretical development.
基金National Key Basic Research and Development(No.2002CB312200)
文摘Mixed-weight least-squares (MWLS) predictive control algorithm, compared with quadratic programming (QP) method, has the advantages of reducing the computer burden, quick calculation speed and dealing with the case in which the optimization is infeasible. But it can only deal with soft constraints. In order to deal with hard constraints and guarantee feasibility, an improved algorithm is proposed by recalculating the setpoint according to the hard constraints before calculating the manipulated variable and MWLS algorithm is used to satisfy the requirement of soft constraints for the system with the input constraints and output constraints. The algorithm can not only guarantee stability of the system and zero steady state error, but also satisfy the hard constraints of input and output variables. The simulation results show the improved algorithm is feasible and effective.
