Copper-exchanged chabazite（Cu/CHA） catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na＋ ions on Cu/SAPO-34 for ammonia selective catalytic reduction（NH_3-SC...Copper-exchanged chabazite（Cu/CHA） catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na＋ ions on Cu/SAPO-34 for ammonia selective catalytic reduction（NH_3-SCR） are still unclear. In order to investigate the mechanism, five samples with various Na contents were synthesized and characterized. It was observed that the introduced Na＋ ion-exchanges with H＋and Cu2＋of Cu/SAPO-34. The exchange of H＋is easier than that of isolated Cu2＋. The exchanged Cu2＋ions aggregate and form ＂CuAl_2O4-like＂ species.The NH_3-SCR activity of Cu/SAPO-34 decreases with increasing Na content, and the loss of isolated Cu2＋and acid sites is responsible for the activity loss.展开更多
Known as a weak topological insulator(TI),BiSe structurally exhibits alternating stacks of quantum spin Hall bilayer("Bi_(2)")and three-dimensional TI layer("Bi_(2)Se_(3)").The low lattice thermal ...Known as a weak topological insulator(TI),BiSe structurally exhibits alternating stacks of quantum spin Hall bilayer("Bi_(2)")and three-dimensional TI layer("Bi_(2)Se_(3)").The low lattice thermal conductivity of BiSe due to the presence of Bi2 bilayers promises potentially good thermoelectric performance.Herein,the thermoelectric properties of nominal Bi_(1-x)Cu_(x)Se samples were studied as the functions of the content of Cu additive and temperature.It is found that Cu additives in BiSe(1)profoundly affect the texture of densified polycrystalline samples by inclining the crystallographic c-axis parallel toward the pressure direction in the densification process,(2)increase considerably the effective mass and thus the Seebeck coefficient,and(3)yield point defects and Cu-Se secondary phases that effectively scatter heat-carrying phonons.As a result,the optimized electrical and thermal properties yield a thermoelectric figure of merit of zT~0.29 in Bi_(1-x)Cu_(x)Se(x=0.03)sample at 467 K in parallel to the pressure direction and a zT~0.20 at 468 K in the perpendicular direction.展开更多
This study deals with the toxic effects of Zn2+, Cu2+, Cd2+ and NH3 on Chinese prawn (Penaeus orientalis). The median lethal concentrations of the toxic matters on Chinese prawn were determined. Cd2+】Cu2+】Zn2+】NH3-...This study deals with the toxic effects of Zn2+, Cu2+, Cd2+ and NH3 on Chinese prawn (Penaeus orientalis). The median lethal concentrations of the toxic matters on Chinese prawn were determined. Cd2+】Cu2+】Zn2+】NH3-Nm is the toxic order of these chemicals to Chinese prawn. The toxic order of concentrated Zn2+ and Cd2+ in tissues and organs of Chinese prawn is in the order gill 】 shell + appendage】viscera 】 muscle..展开更多
The electrochemical hydrogenation of HMF to BHMF is an elegant alternative to the conventio nal thermocatalytic route for the production of high-value-added chemicals from biomass resources.In virtue of the wide poten...The electrochemical hydrogenation of HMF to BHMF is an elegant alternative to the conventio nal thermocatalytic route for the production of high-value-added chemicals from biomass resources.In virtue of the wide potential window with promising Faradic efficiency(FE) towards BHMF,Cu-based electrode has been in the center of investigation.However,its structure-activity relationship remains ambiguous and its intrinsic catalytic activity is still unsatisfactory.In this work,we develop a two-step oxidation-reduction strategy to reconstruct the surface atom arrangement of the Cu foam(CF).By combination of multiple quasi-situ/in-situ techniques and density functional theory(DFT) calculation,the critical factor that governs the reaction is demonstrated to be facet effect of the metallic Cu crystal:Cu(110) facet accounts for the most favorable surface with enhanced chemisorption with reactants and selective production of BHMF,while Cu(100) facet might trigger the accumulation of the by-product 5,5'-bis(hydroxy methy)hydrofurion(BHH).With the optimized composition of the facets on the reconstructed Cu(OH)_(2)-ER/CF,the performance could be noticeably enhanced with a BHMF FE of 92.3% and HMF conversion of 98.5% at a potential of -0.15 V versus reversible hydrogen electrode(vs.RHE) in 0.1 M KOH solution.This work sheds light on the incomplete mechanistic puzzle for Cu-catalyzed electrochemical hydrogenation of HMF to BHMF,and provides a theoretical foundation for further precise design of highly efficient catalytic electrodes.展开更多
A pH dependent reduction in growth, Pigment, ATP content, O,' evolution, carbonfixation, Photosynthetic electron transport system, nutrient uptake (NO,' and NH4+),nitrate reductase, and ATPase activities and i...A pH dependent reduction in growth, Pigment, ATP content, O,' evolution, carbonfixation, Photosynthetic electron transport system, nutrient uptake (NO,' and NH4+),nitrate reductase, and ATPase activities and increase in K+ emux of Chlorella vulgaris wasnoticed following supplementation of Cu and Ni to the culture medium. PS II was foundto be more sensitive to both pH and metals than PS I. Though, nitrate reductase (NR) wasmore sensitive to both PH and metals, the ATPase was however, more sensitive t0 metalsbut less sensitive to acidic pH. Acid PH was found to dst the nutrient (NO,' and NH4+)uptake and nitrate reductase in a non-competitive manner. The inhibition Pnduced by thetest metals alone was of noncompetitive type for NO3' uptake, nitrate reductase andATPase and competitive for NH'+ uptake. Acidity not only inhibited the metabolicvariables directly but also through facilitated uptake of metals and increased membranepermeability. A very low sensitivity of ATPase to acidic pH seems to be resgnsible forthe survival of algae in acid environment.展开更多
The microplasma oxidation process of LY 12 Al alloy in Na2SiO3-KOH-NaAL2 system has been studied. The voltage-time curve of oxidation process is changed with the variation of current ...The microplasma oxidation process of LY 12 Al alloy in Na2SiO3-KOH-NaAL2 system has been studied. The voltage-time curve of oxidation process is changed with the variation of current densities. The voltage breakdown and hardness of coating increase with increasing current density. The phase composition, morphologies, element and the distribution of ceramic coating are investigated by XRD, EPMA.展开更多
Cu(In,Ga)Se_(2)(CIGS)is a promising candidate to replace crystalline silicon solar cells and dominate the photovoltaic market in the future.Alkali elements such as sodium(Na),potassium(K),rubidium(Rb),and Cesium(Cs)ar...Cu(In,Ga)Se_(2)(CIGS)is a promising candidate to replace crystalline silicon solar cells and dominate the photovoltaic market in the future.Alkali elements such as sodium(Na),potassium(K),rubidium(Rb),and Cesium(Cs)are commonly accepted as indispensable parts to boost cell efficiencies of CIGS thin-film solar cells.Therefore,a comprehensive understanding of alkali effects on the electronic and chemical properties of the CIGS layer as well as the underlying mechanisms is of paramount importance for achieving high-performance solar cells.This paper reviews the development process and incorporation pathways of alkalis and then overviews the roles of different alkali elements and their effects on CIGS cells in detail.Furthermore,the unsolved problems and future development prospects are also proposed.Overall,the understanding and development of widely adopted alkali-fluoride post-deposition treatments(PDTs)are still underway,and together with newly updated research,it will likely enable the CIGS technology to make the conversion efficiency closer to its theoretical limit.展开更多
The formability of austenitic high-Mn steels is a critical issue in automotive applications under nonuniformly-deformed environments caused by dynamic strain aging.Among austenite stabilizing alloying elements in thos...The formability of austenitic high-Mn steels is a critical issue in automotive applications under nonuniformly-deformed environments caused by dynamic strain aging.Among austenite stabilizing alloying elements in those steels,Cu has been known as an effective element to enhance tensile properties via controlling the stacking fault energy and stability of austenite.The effects of Cu addition on formability,however,have not been sufficiently reported yet.In this study,the Cu addition effects on formability and surface characteristics in the austenitic high-Mn TRIP steels were analyzed in consideration of inhomogeneous microstructures containing the segregation of Mn and Cu.To reveal determining factors,various mechanical parameters such as total elongation,post elongation,strain hardening rate,normal anisotropy,and planar anisotropy were correlated to the hole-expansion and cup-drawing test results.With respect to microstructural parameters,roles of(Mn,Cu)-segregation bands and resultant Cu-rich FCC precipitates on the formability and surface delamination were also discussed.展开更多
Implant-related infection is one of the most catastrophic complications after surgery,since it may trigger osteomyelitis and necessitate reoperation,increasing the pain suffered by and the burden placed on the patient...Implant-related infection is one of the most catastrophic complications after surgery,since it may trigger osteomyelitis and necessitate reoperation,increasing the pain suffered by and the burden placed on the patient.Producing a new alloy with an antibacterial effect for use as a biomedical material is an urgent requirement.In this article,Ti-6 Al-4 V-5 Cu was synthesized under two different heat treatment schemes(solution temperatures of 850℃and 950℃).Through comprehensive observation of the microstructure,phase,copper ion release,biocompatibility,corrosion resistance and antibacterial effect in vitro and in vivo,it was determined that cell viability and corrosion resistance of Ti-6 Al-4 V-5 Cu was better than Ti-6 Al-4 V.More importantly,the obtained alloy,especially samples treated at 850℃,showed prominent antibacterial ability.Meanwhile,we also found that the main antibacterial mechanism of the alloy was contact sterilization via the extensive precipitation of Ti_(2)Cu instead of Cu ion release,and the content,surface area of Ti_(2)Cu could affect the antibacterial effect.These findings provide a very promising scheme by which to balance the biocompatibility and antibacterial effect of Ti-based,Cu-bearing alloys,which could improve their performance in orthopedic and dental applications.展开更多
The magnetoresistance effect and magnetic properties in amorphous and nanocrystalline Fe(Cu, Nb)-Si-B ribbons have been investigated, it was observed that the anisotropic magnetoresistance (AMR) of nanocrystalline all...The magnetoresistance effect and magnetic properties in amorphous and nanocrystalline Fe(Cu, Nb)-Si-B ribbons have been investigated, it was observed that the anisotropic magnetoresistance (AMR) of nanocrystalline alloy is much smaller than that of amorphous alloy, Indicating that the anisotropy of nanocrystalline alloy becomes smaller after crystallizing, and the smallest AMR is coincident with the excellent soft magnetic characteristics. It is believed that the smaller magnetic crystalline anisotropy is the origin of the excellent soft magnetic characteristics of nanocrystalline alloy.展开更多
In the Lingchuan-Daoping and Xinglu Pb-Zn ore fields in northern and eastern Guangxi Autonomous Region, Pb, Cu botanogeochemical anomalies may be ascribed to the excessive amounts of Pb and Cu taken up by the root sys...In the Lingchuan-Daoping and Xinglu Pb-Zn ore fields in northern and eastern Guangxi Autonomous Region, Pb, Cu botanogeochemical anomalies may be ascribed to the excessive amounts of Pb and Cu taken up by the root system of plants, such as China fir (Cunninghamia lanceolata Lamb. Hook), mason pine (Pinus massoniana Lamb.) and bracken fern (Pteridium aquilinum var. latiusculum). Under transmission electron microscope (TEM), the excess Pb, Cu in the leaf cells of the plants are present as high electron-density substances, which were precipitated in the leaf cells, causing phytotoxic effects by deforming and injuring cellular tissues. The sorts of toxic elements accumulating in the leaf cells are consistent with those of the botanogeochemically anomalous elements in the polluted soil where the plants grow. In addition, the plants may also be capable of resisting the invasion of excess Cu (and Pb) .展开更多
The results of thermomagnetic (TM) and calorimetric (DSC) measurements have been compared in order to clarify some details of the mechanism of nanophase-formation from Finemet-type precursors with different Nb content...The results of thermomagnetic (TM) and calorimetric (DSC) measurements have been compared in order to clarify some details of the mechanism of nanophase-formation from Finemet-type precursors with different Nb contents. It was found that the main features of the DSC thermograms (shape, relative separation and amplitude of the exothermic peaks characteristic for the precipitation of the Fe-(Si) solid solution and the transition metal borides) depend mainly on the composition of the precursor glass, and are only slightly affected by the heating rate between 20 and 80 K/min. The amplitude of the uprise of the magnetization in the TM curves (attributed to the precipitation of bcc-Fe(Si) and borides) decreases with increasing Nb-content. The Curietemperature of the precursor glasses. Tc(am1), the remainder amorphous phases, Tc(am2) and the bcc nanophase, Tc(n-Fe) are determined from the thermomagnetic curves. The shape of the TM curves is interpreted on the basis of the reactions describing the crystalIization of the hypo-eutectic Fe-B glasses.展开更多
Some elements normally occur at trace levels while the majority of natural geological materials may be exceedingly enriched in some special cases, such as the Bayan Obo ore deposit where REE and Nb are extremely enric...Some elements normally occur at trace levels while the majority of natural geological materials may be exceedingly enriched in some special cases, such as the Bayan Obo ore deposit where REE and Nb are extremely enriched. These elements may not be removed completely during purification. Therefore, matrix effects will be caused during stable isotope ratio measurement in the MC-ICP-MS. Experiments have shown that the established methods of chromatographic separation of Cu, Fe, and Zn using AG MP-1 Anion Exchange Resin cannot make ef-fective separation of Nb, W, and Cu from Fe using 20 mL 6 M HCl. It is also observed that the elution curves of W and Cu overlap at working conditions and thus W is present in measurable amounts in some sample solutions. Matrix effects in the MC-ICP-MS induced by Nb, W, and Cu during Fe isotope ratio measurements and by W during Cu isotope ratio measurements were thus investigated by examining their changes in delta values between doped and undoped standards. The results show that the effects of the matrix elements Nb, W, or Cu on Fe isotope ratio measurements are minimal in the case of m(Nb)/m(Fe)<0.005, m(W)/m(Fe)<0.01, or m(Cu)/m(Fe)<0.6. This finding, combined with the extremely low levels of W and Cu, and the fact that nearly 90% of Nb can be removed during purification, demonstrates that the methods of chromatographic separation of Fe established before are suitable for Bayan Obo ore samples and that the methods can be simplified when Cu elution is unnecessary. The effects of the matrix element W on Cu isotope determinations are minimal in the case of m(W)/m(Cu)<0.7. Therefore, W exerts no significant effect on the measurements of Cu isotopes for the majority of natural geological materials.展开更多
Cu-x-Fe-y/SiO2 catalysts were prepared using urea-assisted sol-gel method. The structure and physicochemical properties of the catalysts were characterized using N-2 adsorption-desorption, transmission electron micros...Cu-x-Fe-y/SiO2 catalysts were prepared using urea-assisted sol-gel method. The structure and physicochemical properties of the catalysts were characterized using N-2 adsorption-desorption, transmission electron microscopy, H-2-temperature-programmed reduction, powder X-ray diffraction, and X-ray photoelectron spectroscopy. Compared with monometallic Cu or Fe catalysts, the bimetallic Cu-x-Fe-y/SiO2 catalysts exhibited enhanced catalytic performance for the selective hydrogenation of diethyl malonate to 1,3-propanediol. The bimetallic catalyst with an optimal Cu/Fe atomic ratio of 2 exhibited the highest activity, which yielded 96.3% conversion to diethyl malonate and 93.3% selectivity to 1,3-propanediol under the optimal reaction conditions. Characterization results revealed that interactions between Cu and Fe contributed to the improvement of diethyl malonate conversion and selectivity to 1,3-propanediol. The X-ray photoelectron spectroscopy results revealed that the addition of appropriate amount of Fe species enhanced the reduction of Cu2+ species, thereby increasing the Cu-0 species on the surface of bimetallic catalyst. It led to a better chemisorption capacity of hydrogen and further promoted of the activation of hydrogen molecule. The ethyl acetate temperature-programmed desorption results indicated that the FeOx species provided the additional adsorption sites for substrate molecules, and they activated the C=O bond. The improved catalytic performance of bimetallic Cu-x-Fe-y/SiO2 catalyst was mainly attributed to the synergistic effect between Cu-0 and FeOx species. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.展开更多
In this work,to study the phase structure effect,three groups of Cu/REO catalysts were prepared with cubic and monoclinic Gd_(2)O_(3),Eu_(2)O_(3)and Sm_(2)O_(3) supports for MSR reaction to produce H_(2).Based on CH3O...In this work,to study the phase structure effect,three groups of Cu/REO catalysts were prepared with cubic and monoclinic Gd_(2)O_(3),Eu_(2)O_(3)and Sm_(2)O_(3) supports for MSR reaction to produce H_(2).Based on CH3OH conversion and H_(2)yield,the reaction perfo rmance of the catalysts ranks as Cu/Sm_(2)O_(3)-M>Cu/Sm_(2)O_(3)-C>Cu/Gd_(2)O_(3)-M>Cu/Gd_(2)O_(3)-C>Cu/Eu_(2)O_(3)-M>Cu/Eu_(2)O_(3)-C.For the same kind of REO,Cu supported on the monoclinic support shows better performance than on the cubic one.Despite the phase structure difference,Sm_(2)O_(3) is the best support among all the three kinds of REOs.Compared with Cu/REO catalysts prepared with cubic supports,the corresponding catalysts prepared with monoclinic supports generally possess mo re surface oxygen vacancies,which can generate mo re surface active oxygen(O_(2)^(-)) and moderate basic sites.Moreover,the contents of Cu^(+) on the catalysts follow the same sequence.The reaction performance is positively related to the amount of these three types of surface sites.But metallic Cuo species is necessary to maintain the Cu^(+)■Cu^(0) redox cycle.Furthe rmore,on a catalyst with good perfo rmance,those vital surface reaction intermediates can be stabilized during the reaction.Cu/Sm_(2)O_(3)-M possesses the largest quantities of these surface sites,and has the appropriate amount of Cu^(+) and Cu^(0) after reduction,thereby displaying the optimal performance in all the catalysts.In conclusion,evident support crystal structure effect is observed for Cu/REO catalysts,and a monoclinic phase REO is a better support than the respective cubic phase one.展开更多
China has accumulated massive fine grained copper mine tailings stocks because of the past mining activities in this area. The tailings contain a variety of heavy metals, and the mass percent of Cu, which is one of th...China has accumulated massive fine grained copper mine tailings stocks because of the past mining activities in this area. The tailings contain a variety of heavy metals, and the mass percent of Cu, which is one of the main contaminants in tailings, is up to 0.2601% (analysis by XRF). The Cu can pollute soil and groundwater by rain leaching in the form of Cu(Ⅱ), furthermore ,the fine grained copper-ore-tailings can contaminant larger area by wind for its small granularity ( < 74 μm). The main cause of weathering of mine tailings is due to oxidative dissolution of sulfides. Microorganisms, such as Acidithiobacillus ferrooxidans, play an important role in weathering. These bacteria attach to exposed to mineral surfaces by excreting extracellular polymers and oxidize the sulfide mineral. Some of these bacteria also oxidize Fe2+ to Fe3+ which can chemically oxidize sulfide minerals. These reactions produce voluminous quantities of acid mine drainage and heavy metals which are harmful to the environment and human healthy. This study aims at finding the weathering effects of A. ferrooxidans to Cu(II) pollution of fine grained copper mine tailings, and our experiment applied indigenous A. ferrooxidans FJ-01 to leach the tailings. The optimum test parameters were obtained using shaking flask experiment and SEM observation under the following experimental conditions: 39 days residence time, pulp density 1%-15% (1%, 5% and 15%), 30℃, 120 rpm, pH between 1-3 and redox potential between 400-650 mV. The test results show that the leaching rate of Cu reached 43.1% when the pulp density was 1% after 33 days and kept invariant till the end of the test. In addition, the leaching rate of Cu will decrease as the increase of pulp density, and the maximum rate of 15% pulp density was only 12.5%. From the SEM, it can be seen that the fine grain of tailings flocculated to conglobation under the action of bacterial leaching.展开更多
Various training methods for two way memory effect (TWME) and stressed two way memory effect (STWME) were tried on Cu 13.4Al 4.0Ni (mass fraction, %) single crystals by applying tensile stress along 〈001〉 direction ...Various training methods for two way memory effect (TWME) and stressed two way memory effect (STWME) were tried on Cu 13.4Al 4.0Ni (mass fraction, %) single crystals by applying tensile stress along 〈001〉 direction of β phase. The training method of cooling with load can induce a lot of martensite prone to stabilize, thus cause large residual deformation, wide hysteresis and small TWME. Training with constant load can produce STWME larger than 8% with the least residual deformation. By training procedure of martensite reorientation below M f followed by thermal cycling, the TWME is relatively large with very small residual deformation and with comparatively narrow hysteresis of two way memory. The obtained two way memory curve after such training is not a closed loop, and the obtained TWME is not stable. However, these can be improved by thermal cycling. Training with martensite reorientation below M f and thermal cycling under relatively low constant stress throughout the whole training procedure is the optimum way of obtaining TWME, and more than 1.7% TWME can be obtained. The thermomechanical history of the sample has a pronounced effect on the training result. Thermomechanical cycling has a softening effect on martensite. [展开更多
YBa_2Cu_(3-x)Nb_xO_(7-y) superconductors have been prepared. XRD shows that the system remains orthorhombic for all composition. Substitution of Nb^(5+) for Cu^(2+) occurs in the Cu(2) sites. The introduction of the N...YBa_2Cu_(3-x)Nb_xO_(7-y) superconductors have been prepared. XRD shows that the system remains orthorhombic for all composition. Substitution of Nb^(5+) for Cu^(2+) occurs in the Cu(2) sites. The introduction of the Nb^(5+) ions produces some extra free-electrons. These electrons recombine with the carriers of the system. It makes the mobility and the Hall number of YBa_2Cu_(3-x)Nb_xO_(7-y) decrease and also result in a depression in Tc.展开更多
基金financially supported by the National Key Research and Development program(No.2017YFC0211302)the National Natural Science Foundation of China(No.21676195)+1 种基金the Science Fund of State Key Laboratory of Engine Reliability(No.skler-201714)finical support from GM Global Research&Development(No.GAC1539)
文摘Copper-exchanged chabazite（Cu/CHA） catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na＋ ions on Cu/SAPO-34 for ammonia selective catalytic reduction（NH_3-SCR） are still unclear. In order to investigate the mechanism, five samples with various Na contents were synthesized and characterized. It was observed that the introduced Na＋ ion-exchanges with H＋and Cu2＋of Cu/SAPO-34. The exchange of H＋is easier than that of isolated Cu2＋. The exchanged Cu2＋ions aggregate and form ＂CuAl_2O4-like＂ species.The NH_3-SCR activity of Cu/SAPO-34 decreases with increasing Na content, and the loss of isolated Cu2＋and acid sites is responsible for the activity loss.
基金the Graduate Scientific Research and Innovation Foundation of Chongqing,China(No.CYB 19064)the National Natural Science Foundation of China(Nos.51772035,11674040,51472036 and 51672270)+4 种基金the Fundamental Research Funds for the Central Universities(No.106112017CDJQJ308821)the Key Research Program of Frontier Sciences,CAS(No.QYZDB-SSW-SLH016)the CSC Scholarship(No.201806050180)2019 ITS Summer Fellowship,the Natural Science Foundation of Chongqing,China(No.cstc2019jcyj-msxmX0554)the Starting Research Fund from Chongqing University。
文摘Known as a weak topological insulator(TI),BiSe structurally exhibits alternating stacks of quantum spin Hall bilayer("Bi_(2)")and three-dimensional TI layer("Bi_(2)Se_(3)").The low lattice thermal conductivity of BiSe due to the presence of Bi2 bilayers promises potentially good thermoelectric performance.Herein,the thermoelectric properties of nominal Bi_(1-x)Cu_(x)Se samples were studied as the functions of the content of Cu additive and temperature.It is found that Cu additives in BiSe(1)profoundly affect the texture of densified polycrystalline samples by inclining the crystallographic c-axis parallel toward the pressure direction in the densification process,(2)increase considerably the effective mass and thus the Seebeck coefficient,and(3)yield point defects and Cu-Se secondary phases that effectively scatter heat-carrying phonons.As a result,the optimized electrical and thermal properties yield a thermoelectric figure of merit of zT~0.29 in Bi_(1-x)Cu_(x)Se(x=0.03)sample at 467 K in parallel to the pressure direction and a zT~0.20 at 468 K in the perpendicular direction.
文摘This study deals with the toxic effects of Zn2+, Cu2+, Cd2+ and NH3 on Chinese prawn (Penaeus orientalis). The median lethal concentrations of the toxic matters on Chinese prawn were determined. Cd2+】Cu2+】Zn2+】NH3-Nm is the toxic order of these chemicals to Chinese prawn. The toxic order of concentrated Zn2+ and Cd2+ in tissues and organs of Chinese prawn is in the order gill 】 shell + appendage】viscera 】 muscle..
基金supported by the National Natural Science Foundation of China (21808035, 21901040)the Natural Science Foundation of Fujian Province (2019J05058, 2021J05216, 2022J01922)+3 种基金the Fujian Provincial Department of Finance (GY-Z220231)the fund of the State Key Laboratory of Catalysis in DICP (N-22-08)the Fujian Fishery Disaster Reduction Center (GY-H-22146)College Student Innovation and Entrepreneurship Training Program (x202110388068)。
文摘The electrochemical hydrogenation of HMF to BHMF is an elegant alternative to the conventio nal thermocatalytic route for the production of high-value-added chemicals from biomass resources.In virtue of the wide potential window with promising Faradic efficiency(FE) towards BHMF,Cu-based electrode has been in the center of investigation.However,its structure-activity relationship remains ambiguous and its intrinsic catalytic activity is still unsatisfactory.In this work,we develop a two-step oxidation-reduction strategy to reconstruct the surface atom arrangement of the Cu foam(CF).By combination of multiple quasi-situ/in-situ techniques and density functional theory(DFT) calculation,the critical factor that governs the reaction is demonstrated to be facet effect of the metallic Cu crystal:Cu(110) facet accounts for the most favorable surface with enhanced chemisorption with reactants and selective production of BHMF,while Cu(100) facet might trigger the accumulation of the by-product 5,5'-bis(hydroxy methy)hydrofurion(BHH).With the optimized composition of the facets on the reconstructed Cu(OH)_(2)-ER/CF,the performance could be noticeably enhanced with a BHMF FE of 92.3% and HMF conversion of 98.5% at a potential of -0.15 V versus reversible hydrogen electrode(vs.RHE) in 0.1 M KOH solution.This work sheds light on the incomplete mechanistic puzzle for Cu-catalyzed electrochemical hydrogenation of HMF to BHMF,and provides a theoretical foundation for further precise design of highly efficient catalytic electrodes.
文摘A pH dependent reduction in growth, Pigment, ATP content, O,' evolution, carbonfixation, Photosynthetic electron transport system, nutrient uptake (NO,' and NH4+),nitrate reductase, and ATPase activities and increase in K+ emux of Chlorella vulgaris wasnoticed following supplementation of Cu and Ni to the culture medium. PS II was foundto be more sensitive to both pH and metals than PS I. Though, nitrate reductase (NR) wasmore sensitive to both PH and metals, the ATPase was however, more sensitive t0 metalsbut less sensitive to acidic pH. Acid PH was found to dst the nutrient (NO,' and NH4+)uptake and nitrate reductase in a non-competitive manner. The inhibition Pnduced by thetest metals alone was of noncompetitive type for NO3' uptake, nitrate reductase andATPase and competitive for NH'+ uptake. Acidity not only inhibited the metabolicvariables directly but also through facilitated uptake of metals and increased membranepermeability. A very low sensitivity of ATPase to acidic pH seems to be resgnsible forthe survival of algae in acid environment.
文摘The microplasma oxidation process of LY 12 Al alloy in Na2SiO3-KOH-NaAL2 system has been studied. The voltage-time curve of oxidation process is changed with the variation of current densities. The voltage breakdown and hardness of coating increase with increasing current density. The phase composition, morphologies, element and the distribution of ceramic coating are investigated by XRD, EPMA.
基金supported by the National Natural Science Foundation of China(Nos.11975135 and 61176003)financial support of Special Funds for Fundamental Research Funds for Central Universities(No.2018 NTST29)the Chinese Postdoctoral Science Foundation(No.2019M650524)。
文摘Cu(In,Ga)Se_(2)(CIGS)is a promising candidate to replace crystalline silicon solar cells and dominate the photovoltaic market in the future.Alkali elements such as sodium(Na),potassium(K),rubidium(Rb),and Cesium(Cs)are commonly accepted as indispensable parts to boost cell efficiencies of CIGS thin-film solar cells.Therefore,a comprehensive understanding of alkali effects on the electronic and chemical properties of the CIGS layer as well as the underlying mechanisms is of paramount importance for achieving high-performance solar cells.This paper reviews the development process and incorporation pathways of alkalis and then overviews the roles of different alkali elements and their effects on CIGS cells in detail.Furthermore,the unsolved problems and future development prospects are also proposed.Overall,the understanding and development of widely adopted alkali-fluoride post-deposition treatments(PDTs)are still underway,and together with newly updated research,it will likely enable the CIGS technology to make the conversion efficiency closer to its theoretical limit.
基金supported by the Korea Institute for Advancement of Technology(KIAT)grant funded by the Korea Government(MOTIE)(Grant No.P0002019)the Korea University Grant for the fifth authorthe Brain Korea 21 PLUS Project for Center for Creative Industrial Materials。
文摘The formability of austenitic high-Mn steels is a critical issue in automotive applications under nonuniformly-deformed environments caused by dynamic strain aging.Among austenite stabilizing alloying elements in those steels,Cu has been known as an effective element to enhance tensile properties via controlling the stacking fault energy and stability of austenite.The effects of Cu addition on formability,however,have not been sufficiently reported yet.In this study,the Cu addition effects on formability and surface characteristics in the austenitic high-Mn TRIP steels were analyzed in consideration of inhomogeneous microstructures containing the segregation of Mn and Cu.To reveal determining factors,various mechanical parameters such as total elongation,post elongation,strain hardening rate,normal anisotropy,and planar anisotropy were correlated to the hole-expansion and cup-drawing test results.With respect to microstructural parameters,roles of(Mn,Cu)-segregation bands and resultant Cu-rich FCC precipitates on the formability and surface delamination were also discussed.
基金financially supported by the Harbin Medical University Graduate Research Innovation Fund[201801140]。
文摘Implant-related infection is one of the most catastrophic complications after surgery,since it may trigger osteomyelitis and necessitate reoperation,increasing the pain suffered by and the burden placed on the patient.Producing a new alloy with an antibacterial effect for use as a biomedical material is an urgent requirement.In this article,Ti-6 Al-4 V-5 Cu was synthesized under two different heat treatment schemes(solution temperatures of 850℃and 950℃).Through comprehensive observation of the microstructure,phase,copper ion release,biocompatibility,corrosion resistance and antibacterial effect in vitro and in vivo,it was determined that cell viability and corrosion resistance of Ti-6 Al-4 V-5 Cu was better than Ti-6 Al-4 V.More importantly,the obtained alloy,especially samples treated at 850℃,showed prominent antibacterial ability.Meanwhile,we also found that the main antibacterial mechanism of the alloy was contact sterilization via the extensive precipitation of Ti_(2)Cu instead of Cu ion release,and the content,surface area of Ti_(2)Cu could affect the antibacterial effect.These findings provide a very promising scheme by which to balance the biocompatibility and antibacterial effect of Ti-based,Cu-bearing alloys,which could improve their performance in orthopedic and dental applications.
基金Natural Science Foundation of Liaoning Province!(No. 972812).
文摘The magnetoresistance effect and magnetic properties in amorphous and nanocrystalline Fe(Cu, Nb)-Si-B ribbons have been investigated, it was observed that the anisotropic magnetoresistance (AMR) of nanocrystalline alloy is much smaller than that of amorphous alloy, Indicating that the anisotropy of nanocrystalline alloy becomes smaller after crystallizing, and the smallest AMR is coincident with the excellent soft magnetic characteristics. It is believed that the smaller magnetic crystalline anisotropy is the origin of the excellent soft magnetic characteristics of nanocrystalline alloy.
基金This study is supported by the Guangxi Natural Science Foundation （Grant Nos. Gui Ke Zi 0135043 and Gui Ke Hui 0731023）.
文摘In the Lingchuan-Daoping and Xinglu Pb-Zn ore fields in northern and eastern Guangxi Autonomous Region, Pb, Cu botanogeochemical anomalies may be ascribed to the excessive amounts of Pb and Cu taken up by the root system of plants, such as China fir (Cunninghamia lanceolata Lamb. Hook), mason pine (Pinus massoniana Lamb.) and bracken fern (Pteridium aquilinum var. latiusculum). Under transmission electron microscope (TEM), the excess Pb, Cu in the leaf cells of the plants are present as high electron-density substances, which were precipitated in the leaf cells, causing phytotoxic effects by deforming and injuring cellular tissues. The sorts of toxic elements accumulating in the leaf cells are consistent with those of the botanogeochemically anomalous elements in the polluted soil where the plants grow. In addition, the plants may also be capable of resisting the invasion of excess Cu (and Pb) .
文摘The results of thermomagnetic (TM) and calorimetric (DSC) measurements have been compared in order to clarify some details of the mechanism of nanophase-formation from Finemet-type precursors with different Nb contents. It was found that the main features of the DSC thermograms (shape, relative separation and amplitude of the exothermic peaks characteristic for the precipitation of the Fe-(Si) solid solution and the transition metal borides) depend mainly on the composition of the precursor glass, and are only slightly affected by the heating rate between 20 and 80 K/min. The amplitude of the uprise of the magnetization in the TM curves (attributed to the precipitation of bcc-Fe(Si) and borides) decreases with increasing Nb-content. The Curietemperature of the precursor glasses. Tc(am1), the remainder amorphous phases, Tc(am2) and the bcc nanophase, Tc(n-Fe) are determined from the thermomagnetic curves. The shape of the TM curves is interpreted on the basis of the reactions describing the crystalIization of the hypo-eutectic Fe-B glasses.
基金financially supported by the National Natural Science Foundation of China (Grant No. 40973037)the MLR Public Benefit Research Foundation of China (Grant No.200911043-14)
文摘Some elements normally occur at trace levels while the majority of natural geological materials may be exceedingly enriched in some special cases, such as the Bayan Obo ore deposit where REE and Nb are extremely enriched. These elements may not be removed completely during purification. Therefore, matrix effects will be caused during stable isotope ratio measurement in the MC-ICP-MS. Experiments have shown that the established methods of chromatographic separation of Cu, Fe, and Zn using AG MP-1 Anion Exchange Resin cannot make ef-fective separation of Nb, W, and Cu from Fe using 20 mL 6 M HCl. It is also observed that the elution curves of W and Cu overlap at working conditions and thus W is present in measurable amounts in some sample solutions. Matrix effects in the MC-ICP-MS induced by Nb, W, and Cu during Fe isotope ratio measurements and by W during Cu isotope ratio measurements were thus investigated by examining their changes in delta values between doped and undoped standards. The results show that the effects of the matrix elements Nb, W, or Cu on Fe isotope ratio measurements are minimal in the case of m(Nb)/m(Fe)<0.005, m(W)/m(Fe)<0.01, or m(Cu)/m(Fe)<0.6. This finding, combined with the extremely low levels of W and Cu, and the fact that nearly 90% of Nb can be removed during purification, demonstrates that the methods of chromatographic separation of Fe established before are suitable for Bayan Obo ore samples and that the methods can be simplified when Cu elution is unnecessary. The effects of the matrix element W on Cu isotope determinations are minimal in the case of m(W)/m(Cu)<0.7. Therefore, W exerts no significant effect on the measurements of Cu isotopes for the majority of natural geological materials.
基金supported by the Natural Science Foundation of China (91545115,21473145,and 21403178)the Postgraduate Basic Innovative Research Program of Xiamen University (201412G001)the Program for Innovative Research Team in Chinese Universities (no.IRT_14R31)
文摘Cu-x-Fe-y/SiO2 catalysts were prepared using urea-assisted sol-gel method. The structure and physicochemical properties of the catalysts were characterized using N-2 adsorption-desorption, transmission electron microscopy, H-2-temperature-programmed reduction, powder X-ray diffraction, and X-ray photoelectron spectroscopy. Compared with monometallic Cu or Fe catalysts, the bimetallic Cu-x-Fe-y/SiO2 catalysts exhibited enhanced catalytic performance for the selective hydrogenation of diethyl malonate to 1,3-propanediol. The bimetallic catalyst with an optimal Cu/Fe atomic ratio of 2 exhibited the highest activity, which yielded 96.3% conversion to diethyl malonate and 93.3% selectivity to 1,3-propanediol under the optimal reaction conditions. Characterization results revealed that interactions between Cu and Fe contributed to the improvement of diethyl malonate conversion and selectivity to 1,3-propanediol. The X-ray photoelectron spectroscopy results revealed that the addition of appropriate amount of Fe species enhanced the reduction of Cu2+ species, thereby increasing the Cu-0 species on the surface of bimetallic catalyst. It led to a better chemisorption capacity of hydrogen and further promoted of the activation of hydrogen molecule. The ethyl acetate temperature-programmed desorption results indicated that the FeOx species provided the additional adsorption sites for substrate molecules, and they activated the C=O bond. The improved catalytic performance of bimetallic Cu-x-Fe-y/SiO2 catalyst was mainly attributed to the synergistic effect between Cu-0 and FeOx species. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.
基金Project supported by the National Natural Science Foundation of China(22172071,22102069,22062013,22262021,21962009)Natural Science Foundation of Jiangxi Province,China(20202BAB203006,20212BAB203030)Key Laboratory Foundation of Jiangxi Province for Environment and Energy Catalysis,China(20181BCD40004).
文摘In this work,to study the phase structure effect,three groups of Cu/REO catalysts were prepared with cubic and monoclinic Gd_(2)O_(3),Eu_(2)O_(3)and Sm_(2)O_(3) supports for MSR reaction to produce H_(2).Based on CH3OH conversion and H_(2)yield,the reaction perfo rmance of the catalysts ranks as Cu/Sm_(2)O_(3)-M>Cu/Sm_(2)O_(3)-C>Cu/Gd_(2)O_(3)-M>Cu/Gd_(2)O_(3)-C>Cu/Eu_(2)O_(3)-M>Cu/Eu_(2)O_(3)-C.For the same kind of REO,Cu supported on the monoclinic support shows better performance than on the cubic one.Despite the phase structure difference,Sm_(2)O_(3) is the best support among all the three kinds of REOs.Compared with Cu/REO catalysts prepared with cubic supports,the corresponding catalysts prepared with monoclinic supports generally possess mo re surface oxygen vacancies,which can generate mo re surface active oxygen(O_(2)^(-)) and moderate basic sites.Moreover,the contents of Cu^(+) on the catalysts follow the same sequence.The reaction performance is positively related to the amount of these three types of surface sites.But metallic Cuo species is necessary to maintain the Cu^(+)■Cu^(0) redox cycle.Furthe rmore,on a catalyst with good perfo rmance,those vital surface reaction intermediates can be stabilized during the reaction.Cu/Sm_(2)O_(3)-M possesses the largest quantities of these surface sites,and has the appropriate amount of Cu^(+) and Cu^(0) after reduction,thereby displaying the optimal performance in all the catalysts.In conclusion,evident support crystal structure effect is observed for Cu/REO catalysts,and a monoclinic phase REO is a better support than the respective cubic phase one.
文摘China has accumulated massive fine grained copper mine tailings stocks because of the past mining activities in this area. The tailings contain a variety of heavy metals, and the mass percent of Cu, which is one of the main contaminants in tailings, is up to 0.2601% (analysis by XRF). The Cu can pollute soil and groundwater by rain leaching in the form of Cu(Ⅱ), furthermore ,the fine grained copper-ore-tailings can contaminant larger area by wind for its small granularity ( < 74 μm). The main cause of weathering of mine tailings is due to oxidative dissolution of sulfides. Microorganisms, such as Acidithiobacillus ferrooxidans, play an important role in weathering. These bacteria attach to exposed to mineral surfaces by excreting extracellular polymers and oxidize the sulfide mineral. Some of these bacteria also oxidize Fe2+ to Fe3+ which can chemically oxidize sulfide minerals. These reactions produce voluminous quantities of acid mine drainage and heavy metals which are harmful to the environment and human healthy. This study aims at finding the weathering effects of A. ferrooxidans to Cu(II) pollution of fine grained copper mine tailings, and our experiment applied indigenous A. ferrooxidans FJ-01 to leach the tailings. The optimum test parameters were obtained using shaking flask experiment and SEM observation under the following experimental conditions: 39 days residence time, pulp density 1%-15% (1%, 5% and 15%), 30℃, 120 rpm, pH between 1-3 and redox potential between 400-650 mV. The test results show that the leaching rate of Cu reached 43.1% when the pulp density was 1% after 33 days and kept invariant till the end of the test. In addition, the leaching rate of Cu will decrease as the increase of pulp density, and the maximum rate of 15% pulp density was only 12.5%. From the SEM, it can be seen that the fine grain of tailings flocculated to conglobation under the action of bacterial leaching.
文摘Various training methods for two way memory effect (TWME) and stressed two way memory effect (STWME) were tried on Cu 13.4Al 4.0Ni (mass fraction, %) single crystals by applying tensile stress along 〈001〉 direction of β phase. The training method of cooling with load can induce a lot of martensite prone to stabilize, thus cause large residual deformation, wide hysteresis and small TWME. Training with constant load can produce STWME larger than 8% with the least residual deformation. By training procedure of martensite reorientation below M f followed by thermal cycling, the TWME is relatively large with very small residual deformation and with comparatively narrow hysteresis of two way memory. The obtained two way memory curve after such training is not a closed loop, and the obtained TWME is not stable. However, these can be improved by thermal cycling. Training with martensite reorientation below M f and thermal cycling under relatively low constant stress throughout the whole training procedure is the optimum way of obtaining TWME, and more than 1.7% TWME can be obtained. The thermomechanical history of the sample has a pronounced effect on the training result. Thermomechanical cycling has a softening effect on martensite. [
基金This project was supported by National Matural Science foundation of China.
文摘YBa_2Cu_(3-x)Nb_xO_(7-y) superconductors have been prepared. XRD shows that the system remains orthorhombic for all composition. Substitution of Nb^(5+) for Cu^(2+) occurs in the Cu(2) sites. The introduction of the Nb^(5+) ions produces some extra free-electrons. These electrons recombine with the carriers of the system. It makes the mobility and the Hall number of YBa_2Cu_(3-x)Nb_xO_(7-y) decrease and also result in a depression in Tc.
