A high-temperature and high-pressure valve is the key equipment of a wind tunnel system;it controls the generation of high-temperature and high-pressure gas.To reduce the adverse impact of high-temperature and high-pr...A high-temperature and high-pressure valve is the key equipment of a wind tunnel system;it controls the generation of high-temperature and high-pressure gas.To reduce the adverse impact of high-temperature and high-pressure gas on the strength of the valve body,a cooling structure is set on the valve seat.This can significantly reduce the temperature of the valve body and valve seat.The effects of its structure on the cooling characteristics and stress of the valve seat are studied,and six main parameters that can completely describe the geometry of the cooling structure are proposed.The central composite design method is used to select sample points,and the multi-objective genetic algorithm(MOGA)method is used for optimal structural design.A modification method according to the main parameters for the valve seat is proposed.The results show that the cooling structure weakens the pressure-bearing capability of the valve seat.Among the six main parameters of the valve seat,the distance from the end face of the lower hole to the Z-axis and the distance from the axis of the lower hole to the origin of the coordinates have the most obvious effects on the average stress of the valve seat.An optimum design value is proposed.This work can provide a reference for the design of high-temperature and high-pressure valves.展开更多
Inflatable deployable structures inspired by origami have significant applications in space missions such as solar arrays and antennas.In this paper,a generalized Miura-ori tubular cell(GMTC)is presented as the basic ...Inflatable deployable structures inspired by origami have significant applications in space missions such as solar arrays and antennas.In this paper,a generalized Miura-ori tubular cell(GMTC)is presented as the basic cell to design a family of inflatable origami tubular structures with the targeted configuration.First,the classification of rigid foldable degree-4 vertices is studied thoroughly.Since the proposed GMTC is comprised of forming units(FU)and linking units(LU),types of FUs and LUs are investigated based on the classification of degree-4 vertices,respectively.The rigid foldability of the GMTC is presented by studying the kinematics of the FUs and LUs.Volume of the GMTC is analyzed to investigate multistable configurations of the basic cell.The variations in volume of the GMTC offer great potential for developing the inflatable tubular structure.Design method and parametric optimization of the tubular structure with targeted configuration are proposed.The feasibility of the approach is validated by the approximation of four different cases,namely parabolic,semicircular,trapezoidal,and straight-arc hybrid tubular structures.展开更多
The spinodal decomposition method emerges as a promising methodology,showcasing its potential in exploring the design space for metamaterial structures.However,spinodal structures design is still largely limited to re...The spinodal decomposition method emerges as a promising methodology,showcasing its potential in exploring the design space for metamaterial structures.However,spinodal structures design is still largely limited to regular structures,due to their relatively easy parameterization and controllability.Efficiently predicting the mechanical properties of 3D spinodal membrane structure remains a challenge,given that the features of the membrane necessitate adaptive mesh through the modelling process.This paper proposes an integrated approach for morphological design with customized mechanical properties,incorporating the spinodal decomposition method and adaptive coarse-grained modeling,which can produce various morphologies such as lamellar,columnar,and cubic structures.Pseudo-periodic parameterβand orientational parameterΘ(θ_(1),θ_(2),θ_(3))are identified to achieve the optimal goal of anisotropic mechanical properties.Parametric analysis is conducted to reveal the correlation between the customized spinodal structure and mechanical performance.Our work provides an integrated approach for morphological variation and tuning mechanical properties,paving the way for the design and development of customized functional materials similar to 3D spinodal membrane structures.展开更多
Despite continuous efforts to improve the robustness of cardiac valve implants,neither bioprosthetic nor mechanical valves fulfill both hemodynamic and durability requirements.This study discussed novel flexible leafl...Despite continuous efforts to improve the robustness of cardiac valve implants,neither bioprosthetic nor mechanical valves fulfill both hemodynamic and durability requirements.This study discussed novel flexible leaflet designs,focusing on polymeric materials with proven hemocompatibility,such as polyether ether ketone,of much higher stiffness than native tissue,aiming at optimal valve implants.A biomimetic valve with a single-curvature belly-curve(B-C)was used as a reference for new design variants with a double-curvature B-C with varying radii.Soft(13.2 MPa)and stiff(2.4 GPa)leaflet materials and different thicknesses were studied using lean simulations and in vitro experiments under physiologic hemodynamic conditions.The performance was assessed using opening pressure(OP)and orifice area(OA).The latter was determined by a newly developed automatized image processing tool.Experimental trends are in agreement with simulations and demonstrated that a buckling-inspired double-curvature leaflet design significantly enhances the trileaflet valve opening behavior,which is particularly advantageous for stiffer leaflet materials.Compared to the reference,the best-performing variant showed an OP improvement of 47%and 44%based on simulations and experiments,respectively.In contrast,the achieved mean pressure differential was directly comparable to state-of-the-art bioprosthetic valves.The OA was slightly reduced for new variants but still in the satisfying range.展开更多
This paper discusses the method of how to develop the parametric design system. It presents an idea and a method of developing AutoCAD R14 with the help of VB, AutoLISP and DantaBase system on the base of AntoCAD Auto...This paper discusses the method of how to develop the parametric design system. It presents an idea and a method of developing AutoCAD R14 with the help of VB, AutoLISP and DantaBase system on the base of AntoCAD Automation technology. Therefore, the question of how to integrate the user's interface, data (DataBase) management and parameter transformation can be solved properly.展开更多
An approach to feature-based parametric design for die and mould is proposed in this paper.The assembly relationship and parts of the die and mould are described by feature.The dependent relationship of features is de...An approach to feature-based parametric design for die and mould is proposed in this paper.The assembly relationship and parts of the die and mould are described by feature.The dependent relationship of features is described by parent-child operator structure.The feature shape and location can be modified by design parameters.An expert system is used for deriving a geometry of the features which satisfies the given constraints.This approach provides a more natural and convenient method of representing a parametric model of the die and mould.展开更多
A new generalized modular design (GMD) method is proposed based on designpractice of frame structure of hydraulic press machines. By building a series of flexible modules(FMs), design knowledge and structure features ...A new generalized modular design (GMD) method is proposed based on designpractice of frame structure of hydraulic press machines. By building a series of flexible modules(FMs), design knowledge and structure features are integrated into parametric models. Then,parametric design and variational analysis methods for GMD are presented according to user defineddesign objectives and customized product characteristics. A FM-centered GMD system is developed andsuccessfully used in the rapid design of relevant products.展开更多
The divertor target components for the Chinese fusion engineering test reactor(CFETR)and the future experimental advanced superconducting tokamak(EAST)need to remove a heat flux of up to20 MW m-2.In view of such a hig...The divertor target components for the Chinese fusion engineering test reactor(CFETR)and the future experimental advanced superconducting tokamak(EAST)need to remove a heat flux of up to20 MW m-2.In view of such a high heat flux removal requirement,this study proposes a conceptual design for a flat-tile divertor target based on explosive welding and brazing technology.Rectangular water-cooled channels with a special thermal transfer structure(TTS)are designed in the heat sink to improve the flat-tile divertor target’s heat transfer performance(HTP).The parametric design and optimization methods are applied to study the influence of the TTS variation parameters,including height(H),width(W*),thickness(T),and spacing(L),on the HTP.The research results show that the flat-tile divertor target’s HTP is sensitive to the TTS parameter changes,and the sensitivity is T>L>W*>H.The HTP first increases and then decreases with the increase of T,L,and W*and gradually increases with the increase of H.The optimal design parameters are as follows:H=5.5 mm,W*=25.8 mm,T=2.2 mm,and L=9.7 mm.The HTP of the optimized flat-tile divertor target at different flow speeds and tungsten tile thicknesses is studied using the numerical simulation method.A flat-tile divertor mock-up is developed according to the optimized parameters.In addition,high heat flux(HHF)tests are performed on an electron beam facility to further investigate the mock-up HTP.The numerical simulation calculation results show that the optimized flat-tile divertor target has great potential for handling the steady-state heat load of 20 MW m-2under the tungsten tile thickness<5 mm and the flow speed7 m s^(-1).The heat transfer efficiency of the flat-tile divertor target with rectangular cooling channels improves by13%and30%compared to that of the flat-tile divertor target with circular cooling channels and the ITER-like monoblock,respectively.The HHF tests indicate that the flat-tile divertor mock-up can successfully withstand 1000 cycles of20 MW m-2of heat load without visible deformation,damage,and HTP degradation.The surface temperature of the flat-tile divertor mock-up at the 1000th cycle is only930℃.The flat-tile divertor target’s HTP is greatly improved by the parametric design and optimization method,and is better than the ITER-like monoblock and the flat-tile mock-up for the WEST divertor.This conceptual design is currently being applied to the engineering design of the CFETR and EAST flat-tile divertors.展开更多
In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given...In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given,and the mathematical model of reverse solution for this mechanism was established.The parameters of this mechanism were obtained by reverse solution on the basis of the given ideal kinematic curves and kinematic requirements.The parametric design platform which was integrated with the functions of parametric reverse solution,motion simulation,three-dimensional modeling and virtual assembly was developed based on VB.NET and Unigraphics(UG) NX.After entering the technological parameters of weft insertion process and essential structural parameters by users,three-dimensional drawing of the main parts such as the conjugate cam and shaft,can be obtained by this platform,also the processing data of the cam can be calculated.This platform provides a rapid approach for parametric design of weft insertion mechanism.展开更多
The creation of hollow out art includes a variety of materials, techniques and categories, its content mostly emphasizes the ancient philosophy performance of the alternation of virtual and real, and Yin-Yang depends ...The creation of hollow out art includes a variety of materials, techniques and categories, its content mostly emphasizes the ancient philosophy performance of the alternation of virtual and real, and Yin-Yang depends on the essence of Chinese culture deduction. If this feature is applied to product design, in addition to emphasizing functional orientation, this traditional arts integration with the new media, will give users a different visual inspire. This thesis is mainly in view of the importance of hollow out art in Chinese cultural heritage, and the 3D hollow out production craft has gradually lost. Therefore, the Delaunay triangle is constructed based on the Convex Hull interpolation algorithm, and the Voronoi Diagram feature is constructed based on the Divide and Conquer algorithm. And with Rhino modeling software as the main body, combined with the application of the parametric plug-in design program (GH), the 3D models of the parametric creative hollow pen holder and the parametric creative hollow lampshade were respectively completed. The traditional craftsmanship is integrated into the modern manufacturing process with innovative techniques, and the Chinese cultural spirit and beauty of nature are successfully connected.展开更多
The art of weaving is an ancient and beautiful technique that never fades. Various weaving techniques and various totem patterns contain rich cultural connotations. The development of cultural and creative industries ...The art of weaving is an ancient and beautiful technique that never fades. Various weaving techniques and various totem patterns contain rich cultural connotations. The development of cultural and creative industries often uses existing environmental materials to deconstruct and use them in innovative ways to reinspire and present another style. With the rapid progress of computer-aided design technology, digital applications in the design practice has become an important element, and parametric design is the best popular design method in recent years. This paper is mainly in view of the weaving crafts in the traditional culture of the world occupies an important role, and the precious traditional weaving crafts gradually lost. Therefore, it is planned to construct a 3D model with knitting characteristics through a parametric design method, and print out the prototype through the 3D printing mechanism, that is, the traditional craftsmanship is integrated into the modern manufacturing process with innovative techniques, to show the new style of this weaving craft culture that is different from the past, so that it not only retain its inherent spirit, but also can promote this ideal of cultural creativity.展开更多
In the last decade, parametric and generative design techniques become quite popular for form-finding strategies or for pushing automation in design processes. Nevertheless, these techniques could be applied in engine...In the last decade, parametric and generative design techniques become quite popular for form-finding strategies or for pushing automation in design processes. Nevertheless, these techniques could be applied in engineering processes as well in order to improve the effectiveness and the efficiency of manufacturing processes in BI （building industry）. Focusing on the case study of GLT （glued-laminated timber）, this paper shows the procedure of programming a parametric algorithm adopted by authors that pursues two specific design intents： reducing the usage of unneeded high-quality raw material and improving the efficiency of production processes by producing DF （digital fabrication） contents for standard production systems of GLT. According to different European and international standards, thanks to FEM （finite element model） simulations and curvature analysis, the algorithm allows saving at least 33% of high-quality raw material and, according to early first surveys on a standard production system, 30% of operation time among product engineering-processes.展开更多
This paper focuses on the problem of low efficiency and limited non-geometric information handling ability in the process of 2D heating furnace design, proposes a 3D concurrent parametric design system, this method is...This paper focuses on the problem of low efficiency and limited non-geometric information handling ability in the process of 2D heating furnace design, proposes a 3D concurrent parametric design system, this method is realized by parametric design technology, which is supported by ActiveX-Automation technology and VBA technology, mutual visit between application programs makes batched modeling become possible, key dimensions are linked with each other by restrictions, so parts can be built concurrently by sharing few parameters between common borders, designer can be free from repeated drawing work during modification, Solid Edge is chosen as the modeling server, a secondary development software is programmed by Visual Basic, this system provides a feasible way to overlap time between different sections, the design efficiency and quality is improved significantly.展开更多
To solve the existing problems during the ceramic mold enterprises product design and development process, the variable structure parametric design system based on modular of ceramic mold has been developed. The syste...To solve the existing problems during the ceramic mold enterprises product design and development process, the variable structure parametric design system based on modular of ceramic mold has been developed. The system uses the object-oriented technology and top-down design concept as a guide, establishes a ceramic mold parametric design process, divides the process of ceramic mold design into modules of different levels and creates a component model library based on the functional analysis. Expanding modular thinking to parts structure design level is an effective solution to the difficulty of changing the structure during the product design process. Examples show that the system can achieve a ceramic mold product design, improve design efficiency.展开更多
The definition and functions of parametric design were introduced. According to the practical condition of mechanical engineering design, the necessity and feasibility of parametric design for complex mechanical engin...The definition and functions of parametric design were introduced. According to the practical condition of mechanical engineering design, the necessity and feasibility of parametric design for complex mechanical engineering design was analyzed. The related key technologies and methods were also discussed by a project example based on Inventor platform.展开更多
Purpose–The nose length is the key design parameter affecting the aerodynamic performance of high-speed maglev train,and the horizontal profile has a significant impact on the aerodynamic lift of the leading and trai...Purpose–The nose length is the key design parameter affecting the aerodynamic performance of high-speed maglev train,and the horizontal profile has a significant impact on the aerodynamic lift of the leading and trailing cars Hence,the study analyzes aerodynamic parameters with multi-objective optimization design.Design/methodology/approach–The nose of normal temperature and normal conduction high-speed maglev train is divided into streamlined part and equipment cabin according to its geometric characteristics.Then the modified vehicle modeling function(VMF)parameterization method and surface discretization method are adopted for the parametric design of the nose.For the 12 key design parameters extracted,combined with computational fluid dynamics(CFD),support vector machine(SVR)model and multi-objective particle swarm optimization(MPSO)algorithm,the multi-objective aerodynamic optimization design of highspeed maglev train nose and the sensitivity analysis of design parameters are carried out with aerodynamic drag coefficient of the whole vehicle and the aerodynamic lift coefficient of the trailing car as the optimization objectives and the aerodynamic lift coefficient of the leading car as the constraint.The engineering improvement and wind tunnel test verification of the optimized shape are done.Findings–Results show that the parametric design method can use less design parameters to describe the nose shape of high-speed maglev train.The prediction accuracy of the SVR model with the reduced amount of calculation and improved optimization efficiency meets the design requirements.Originality/value–Compared with the original shape,the aerodynamic drag coefficient of the whole vehicle is reduced by 19.2%,and the aerodynamic lift coefficients of the leading and trailing cars are reduced by 24.8 and 51.3%,respectively,after adopting the optimized shape modified according to engineering design requirements.展开更多
Optimization analysis and computational fluid dynamics （CFDs） have been applied simultaneously, in which a parametric model plays an important role in finding the optimal solution. However, it is difficult to create...Optimization analysis and computational fluid dynamics （CFDs） have been applied simultaneously, in which a parametric model plays an important role in finding the optimal solution. However, it is difficult to create a parametric model for a complex shape with irregular curves, such as a submarine hull form. In this study, the cubic Bezier curve and curve-plane intersection method are used to generate a solid model of a parametric submarine hull form taking three input parameters into account： nose radius, tail radius, and length-height hull ratio （L/H）. Application program interface （API） scripting is also used to write code in the ANSYS DesignModeler. The results show that the submarine shape can be generated with some variation of the input parameters. An example is given that shows how the proposed method can be applied successfully to a hull resistance optimization case. The parametric design of the middle submarine type was chosen to be modified. First, the original submarine model was analyzed, in advance, using CFD. Then, using the response surface graph, some candidate optimal designs with a minimum hull resistance coefficient were obtained. Further, the optimization method in goal-driven optimization （GDO） was implemented to find the submarine hull form with the minimum hull resistance coefficient （Ct）. The minimum C, was obtained. The calculated difference in （7, values between the initial submarine and the optimum submarine is around 0.26%, with the C, of the initial submarine and the optimum submarine being 0.001 508 26 and 0.001 504 29, respectively. The results show that the optimum submarine hull form shows a higher nose radius （rn） and higher L/H than those of the initial submarine shape, while the radius of the tail （r1） is smaller than that of the initial shape.展开更多
Die casting process is one of the prime options for m anufacturing precisely dimensioned, sharply defined metal parts. The design of d ie casting dies comprises several stages and entails a large amount of time. Tra d...Die casting process is one of the prime options for m anufacturing precisely dimensioned, sharply defined metal parts. The design of d ie casting dies comprises several stages and entails a large amount of time. Tra ditionally, the different stages of the die design were not integrated but exist as separate entities. Moreover, recurring modifications or even redesigns are r equired due to the complexity in achieving an accurate initial die design. As a result, die design is usually time-consuming and costly with respect to resourc es. The die casting industry will greatly benefit if proper application software are developed that integrates the different die design stages and allows editin g of die design as and when needed. Hence it is imperative to create an integrat ed die design system that shortens the die design time. This paper presents a research that establishes a prototype of an integrated die design system. It is developed using the commercial SolidWorks CAD system and n amed DiWorks. The aim of building the system on a commercial CAD system is to ut ilise the resources and features of the CAD system to speed up the die design pr ocess. DiWorks consists of six distinct modules: Project Manager, Cavity Insert Builder, Gating System Constructor, Die Base Designer, Ejector System Constructo r and Standard Components Library. Through these six modules, the die designer c an create a complete die casting die beginning from a product part model. It is a user-friendly system that allows both experienced and novice die designers to easily accomplish the task of die design. The practical goal of this research is twofold: to develop a system that integra tes the die design process and at the same time facilitates the editing of d ie design during or after the course of the design process. The research approac h includes (i) parametric design, (ii) feature-based design (iii) system modeli ng and implementation. Parametric design deals with variable dimensions as contr ol parameters, and it is an efficient tool for creating models based on paramete rs. Parametric design not only increases the design efficiency, but also makes t he updates and modifications of existing designs easier and faster, since these can be achieved by changing the parameters of the parametric model. Feature-bas ed design is used to design a product with features that are functionally define d by attributes and are geometrically represented by a set of parameters. The re sults of this research will aid the automation of the die design process, thus i mproving the efficiency and quality of, and reducing the cost of die design.展开更多
Parametric design of typical parts holds a very important position during process of product designs. In order to develop a parametric design system of typical parts compatible with heterogeneous CAD systems, this pap...Parametric design of typical parts holds a very important position during process of product designs. In order to develop a parametric design system of typical parts compatible with heterogeneous CAD systems, this paper presents a framework of a network-oriented design system of typical parts, enabled by eXtensible Markup Language (XML), capable of providing parametric design. Firstly, an overview of the framework is presented. In order to map the part feature hierarchy tree of 3D model into an XML tree, an XML-based part template is introduced. The methods of XML-based parametric design and parametric design navigation are described. Finally, an application example of prototype system under the Pro/Engineer platform is given. The application indicates that the proposed framework is valid for parametric design of typical parts/components in heterogeneous CAD systems.展开更多
Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modellingis a collaborative process where all stake...Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modellingis a collaborative process where all stakeholders integrate and optimize their information in a digital 3D model. Sometimes it is called Green BIM. But what exactly is that？ Is the International Standard Organization IFC standard useful for this？ And is it compatible with new developments in parametric design？ Advantages and disadvantages of BIM are listed. Full parametric design is needed because it keeps the design flexible and open for changes until the end of the design process. However it is not compatible with IFC; only object parametric design is. A possible way out of this paradox could be the use of scripts that only create objects if they are not already in the BIM database and otherwise only adapt their properties. An example of parametric sustainable architectural design explains the mentioned issues.展开更多
基金supported by the National Natural Science Foundation of China(No.52175067)the Zhejiang Key Research&Development Project(No.2021C01021)+1 种基金the Natural Science Foundation of Zhejiang Province(No.LY20E050016)the Postdoctoral Fellowship Program of China Postdoctoral Science Foundation(CPSF)(No.GZC20241478)。
文摘A high-temperature and high-pressure valve is the key equipment of a wind tunnel system;it controls the generation of high-temperature and high-pressure gas.To reduce the adverse impact of high-temperature and high-pressure gas on the strength of the valve body,a cooling structure is set on the valve seat.This can significantly reduce the temperature of the valve body and valve seat.The effects of its structure on the cooling characteristics and stress of the valve seat are studied,and six main parameters that can completely describe the geometry of the cooling structure are proposed.The central composite design method is used to select sample points,and the multi-objective genetic algorithm(MOGA)method is used for optimal structural design.A modification method according to the main parameters for the valve seat is proposed.The results show that the cooling structure weakens the pressure-bearing capability of the valve seat.Among the six main parameters of the valve seat,the distance from the end face of the lower hole to the Z-axis and the distance from the axis of the lower hole to the origin of the coordinates have the most obvious effects on the average stress of the valve seat.An optimum design value is proposed.This work can provide a reference for the design of high-temperature and high-pressure valves.
基金supported by the National Natural Science Foundation of China(No.52222501,52075016,52192632)the Fundamental Research Funds for the Central Universities(Grant No.YWF-23-L-904).
文摘Inflatable deployable structures inspired by origami have significant applications in space missions such as solar arrays and antennas.In this paper,a generalized Miura-ori tubular cell(GMTC)is presented as the basic cell to design a family of inflatable origami tubular structures with the targeted configuration.First,the classification of rigid foldable degree-4 vertices is studied thoroughly.Since the proposed GMTC is comprised of forming units(FU)and linking units(LU),types of FUs and LUs are investigated based on the classification of degree-4 vertices,respectively.The rigid foldability of the GMTC is presented by studying the kinematics of the FUs and LUs.Volume of the GMTC is analyzed to investigate multistable configurations of the basic cell.The variations in volume of the GMTC offer great potential for developing the inflatable tubular structure.Design method and parametric optimization of the tubular structure with targeted configuration are proposed.The feasibility of the approach is validated by the approximation of four different cases,namely parabolic,semicircular,trapezoidal,and straight-arc hybrid tubular structures.
基金supported by the National Natural Science Foundation of China(Grant No.11872278)the Science and Technology Commission of Shanghai Municipality(Grant No.21ZR1467200)the Fundamental Research Funds for the Central Universities.
文摘The spinodal decomposition method emerges as a promising methodology,showcasing its potential in exploring the design space for metamaterial structures.However,spinodal structures design is still largely limited to regular structures,due to their relatively easy parameterization and controllability.Efficiently predicting the mechanical properties of 3D spinodal membrane structure remains a challenge,given that the features of the membrane necessitate adaptive mesh through the modelling process.This paper proposes an integrated approach for morphological design with customized mechanical properties,incorporating the spinodal decomposition method and adaptive coarse-grained modeling,which can produce various morphologies such as lamellar,columnar,and cubic structures.Pseudo-periodic parameterβand orientational parameterΘ(θ_(1),θ_(2),θ_(3))are identified to achieve the optimal goal of anisotropic mechanical properties.Parametric analysis is conducted to reveal the correlation between the customized spinodal structure and mechanical performance.Our work provides an integrated approach for morphological variation and tuning mechanical properties,paving the way for the design and development of customized functional materials similar to 3D spinodal membrane structures.
基金provided by Board of the Swiss Federal Institutes of TechnologyUniversitat Zürichthe Laboratory of Composite Materials and Adaptive structures。
文摘Despite continuous efforts to improve the robustness of cardiac valve implants,neither bioprosthetic nor mechanical valves fulfill both hemodynamic and durability requirements.This study discussed novel flexible leaflet designs,focusing on polymeric materials with proven hemocompatibility,such as polyether ether ketone,of much higher stiffness than native tissue,aiming at optimal valve implants.A biomimetic valve with a single-curvature belly-curve(B-C)was used as a reference for new design variants with a double-curvature B-C with varying radii.Soft(13.2 MPa)and stiff(2.4 GPa)leaflet materials and different thicknesses were studied using lean simulations and in vitro experiments under physiologic hemodynamic conditions.The performance was assessed using opening pressure(OP)and orifice area(OA).The latter was determined by a newly developed automatized image processing tool.Experimental trends are in agreement with simulations and demonstrated that a buckling-inspired double-curvature leaflet design significantly enhances the trileaflet valve opening behavior,which is particularly advantageous for stiffer leaflet materials.Compared to the reference,the best-performing variant showed an OP improvement of 47%and 44%based on simulations and experiments,respectively.In contrast,the achieved mean pressure differential was directly comparable to state-of-the-art bioprosthetic valves.The OA was slightly reduced for new variants but still in the satisfying range.
文摘This paper discusses the method of how to develop the parametric design system. It presents an idea and a method of developing AutoCAD R14 with the help of VB, AutoLISP and DantaBase system on the base of AntoCAD Automation technology. Therefore, the question of how to integrate the user's interface, data (DataBase) management and parameter transformation can be solved properly.
文摘An approach to feature-based parametric design for die and mould is proposed in this paper.The assembly relationship and parts of the die and mould are described by feature.The dependent relationship of features is described by parent-child operator structure.The feature shape and location can be modified by design parameters.An expert system is used for deriving a geometry of the features which satisfies the given constraints.This approach provides a more natural and convenient method of representing a parametric model of the die and mould.
文摘A new generalized modular design (GMD) method is proposed based on designpractice of frame structure of hydraulic press machines. By building a series of flexible modules(FMs), design knowledge and structure features are integrated into parametric models. Then,parametric design and variational analysis methods for GMD are presented according to user defineddesign objectives and customized product characteristics. A FM-centered GMD system is developed andsuccessfully used in the rapid design of relevant products.
基金supported by the National MCF Energy R&D Program(No.2018YFE0312300)the National Key Research and Development Program of China(No.2017YFA0402500)the Science Foundation of the Institute of Plasma Physics,Chinese Academy of Sciences(No.Y45ETY2302)。
文摘The divertor target components for the Chinese fusion engineering test reactor(CFETR)and the future experimental advanced superconducting tokamak(EAST)need to remove a heat flux of up to20 MW m-2.In view of such a high heat flux removal requirement,this study proposes a conceptual design for a flat-tile divertor target based on explosive welding and brazing technology.Rectangular water-cooled channels with a special thermal transfer structure(TTS)are designed in the heat sink to improve the flat-tile divertor target’s heat transfer performance(HTP).The parametric design and optimization methods are applied to study the influence of the TTS variation parameters,including height(H),width(W*),thickness(T),and spacing(L),on the HTP.The research results show that the flat-tile divertor target’s HTP is sensitive to the TTS parameter changes,and the sensitivity is T>L>W*>H.The HTP first increases and then decreases with the increase of T,L,and W*and gradually increases with the increase of H.The optimal design parameters are as follows:H=5.5 mm,W*=25.8 mm,T=2.2 mm,and L=9.7 mm.The HTP of the optimized flat-tile divertor target at different flow speeds and tungsten tile thicknesses is studied using the numerical simulation method.A flat-tile divertor mock-up is developed according to the optimized parameters.In addition,high heat flux(HHF)tests are performed on an electron beam facility to further investigate the mock-up HTP.The numerical simulation calculation results show that the optimized flat-tile divertor target has great potential for handling the steady-state heat load of 20 MW m-2under the tungsten tile thickness<5 mm and the flow speed7 m s^(-1).The heat transfer efficiency of the flat-tile divertor target with rectangular cooling channels improves by13%and30%compared to that of the flat-tile divertor target with circular cooling channels and the ITER-like monoblock,respectively.The HHF tests indicate that the flat-tile divertor mock-up can successfully withstand 1000 cycles of20 MW m-2of heat load without visible deformation,damage,and HTP degradation.The surface temperature of the flat-tile divertor mock-up at the 1000th cycle is only930℃.The flat-tile divertor target’s HTP is greatly improved by the parametric design and optimization method,and is better than the ITER-like monoblock and the flat-tile mock-up for the WEST divertor.This conceptual design is currently being applied to the engineering design of the CFETR and EAST flat-tile divertors.
基金National Natural Science Foundation of China (No.50875243)Natural Science Foundation of Zhejiang Province,China (No.Y1110100)
文摘In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given,and the mathematical model of reverse solution for this mechanism was established.The parameters of this mechanism were obtained by reverse solution on the basis of the given ideal kinematic curves and kinematic requirements.The parametric design platform which was integrated with the functions of parametric reverse solution,motion simulation,three-dimensional modeling and virtual assembly was developed based on VB.NET and Unigraphics(UG) NX.After entering the technological parameters of weft insertion process and essential structural parameters by users,three-dimensional drawing of the main parts such as the conjugate cam and shaft,can be obtained by this platform,also the processing data of the cam can be calculated.This platform provides a rapid approach for parametric design of weft insertion mechanism.
文摘The creation of hollow out art includes a variety of materials, techniques and categories, its content mostly emphasizes the ancient philosophy performance of the alternation of virtual and real, and Yin-Yang depends on the essence of Chinese culture deduction. If this feature is applied to product design, in addition to emphasizing functional orientation, this traditional arts integration with the new media, will give users a different visual inspire. This thesis is mainly in view of the importance of hollow out art in Chinese cultural heritage, and the 3D hollow out production craft has gradually lost. Therefore, the Delaunay triangle is constructed based on the Convex Hull interpolation algorithm, and the Voronoi Diagram feature is constructed based on the Divide and Conquer algorithm. And with Rhino modeling software as the main body, combined with the application of the parametric plug-in design program (GH), the 3D models of the parametric creative hollow pen holder and the parametric creative hollow lampshade were respectively completed. The traditional craftsmanship is integrated into the modern manufacturing process with innovative techniques, and the Chinese cultural spirit and beauty of nature are successfully connected.
文摘The art of weaving is an ancient and beautiful technique that never fades. Various weaving techniques and various totem patterns contain rich cultural connotations. The development of cultural and creative industries often uses existing environmental materials to deconstruct and use them in innovative ways to reinspire and present another style. With the rapid progress of computer-aided design technology, digital applications in the design practice has become an important element, and parametric design is the best popular design method in recent years. This paper is mainly in view of the weaving crafts in the traditional culture of the world occupies an important role, and the precious traditional weaving crafts gradually lost. Therefore, it is planned to construct a 3D model with knitting characteristics through a parametric design method, and print out the prototype through the 3D printing mechanism, that is, the traditional craftsmanship is integrated into the modern manufacturing process with innovative techniques, to show the new style of this weaving craft culture that is different from the past, so that it not only retain its inherent spirit, but also can promote this ideal of cultural creativity.
文摘In the last decade, parametric and generative design techniques become quite popular for form-finding strategies or for pushing automation in design processes. Nevertheless, these techniques could be applied in engineering processes as well in order to improve the effectiveness and the efficiency of manufacturing processes in BI （building industry）. Focusing on the case study of GLT （glued-laminated timber）, this paper shows the procedure of programming a parametric algorithm adopted by authors that pursues two specific design intents： reducing the usage of unneeded high-quality raw material and improving the efficiency of production processes by producing DF （digital fabrication） contents for standard production systems of GLT. According to different European and international standards, thanks to FEM （finite element model） simulations and curvature analysis, the algorithm allows saving at least 33% of high-quality raw material and, according to early first surveys on a standard production system, 30% of operation time among product engineering-processes.
基金Supported by National Natural Science Foundation of China (50574021)
文摘This paper focuses on the problem of low efficiency and limited non-geometric information handling ability in the process of 2D heating furnace design, proposes a 3D concurrent parametric design system, this method is realized by parametric design technology, which is supported by ActiveX-Automation technology and VBA technology, mutual visit between application programs makes batched modeling become possible, key dimensions are linked with each other by restrictions, so parts can be built concurrently by sharing few parameters between common borders, designer can be free from repeated drawing work during modification, Solid Edge is chosen as the modeling server, a secondary development software is programmed by Visual Basic, this system provides a feasible way to overlap time between different sections, the design efficiency and quality is improved significantly.
文摘To solve the existing problems during the ceramic mold enterprises product design and development process, the variable structure parametric design system based on modular of ceramic mold has been developed. The system uses the object-oriented technology and top-down design concept as a guide, establishes a ceramic mold parametric design process, divides the process of ceramic mold design into modules of different levels and creates a component model library based on the functional analysis. Expanding modular thinking to parts structure design level is an effective solution to the difficulty of changing the structure during the product design process. Examples show that the system can achieve a ceramic mold product design, improve design efficiency.
文摘The definition and functions of parametric design were introduced. According to the practical condition of mechanical engineering design, the necessity and feasibility of parametric design for complex mechanical engineering design was analyzed. The related key technologies and methods were also discussed by a project example based on Inventor platform.
文摘Purpose–The nose length is the key design parameter affecting the aerodynamic performance of high-speed maglev train,and the horizontal profile has a significant impact on the aerodynamic lift of the leading and trailing cars Hence,the study analyzes aerodynamic parameters with multi-objective optimization design.Design/methodology/approach–The nose of normal temperature and normal conduction high-speed maglev train is divided into streamlined part and equipment cabin according to its geometric characteristics.Then the modified vehicle modeling function(VMF)parameterization method and surface discretization method are adopted for the parametric design of the nose.For the 12 key design parameters extracted,combined with computational fluid dynamics(CFD),support vector machine(SVR)model and multi-objective particle swarm optimization(MPSO)algorithm,the multi-objective aerodynamic optimization design of highspeed maglev train nose and the sensitivity analysis of design parameters are carried out with aerodynamic drag coefficient of the whole vehicle and the aerodynamic lift coefficient of the trailing car as the optimization objectives and the aerodynamic lift coefficient of the leading car as the constraint.The engineering improvement and wind tunnel test verification of the optimized shape are done.Findings–Results show that the parametric design method can use less design parameters to describe the nose shape of high-speed maglev train.The prediction accuracy of the SVR model with the reduced amount of calculation and improved optimization efficiency meets the design requirements.Originality/value–Compared with the original shape,the aerodynamic drag coefficient of the whole vehicle is reduced by 19.2%,and the aerodynamic lift coefficients of the leading and trailing cars are reduced by 24.8 and 51.3%,respectively,after adopting the optimized shape modified according to engineering design requirements.
基金Supported by the Ministry of Research,Technology,and Higher Education Republic of Indonesia,through the Budget Implementation List(DIPA)of Diponegoro University,Grant No.DIPA-023.04.02.189185/2014,December 05,2013
文摘Optimization analysis and computational fluid dynamics （CFDs） have been applied simultaneously, in which a parametric model plays an important role in finding the optimal solution. However, it is difficult to create a parametric model for a complex shape with irregular curves, such as a submarine hull form. In this study, the cubic Bezier curve and curve-plane intersection method are used to generate a solid model of a parametric submarine hull form taking three input parameters into account： nose radius, tail radius, and length-height hull ratio （L/H）. Application program interface （API） scripting is also used to write code in the ANSYS DesignModeler. The results show that the submarine shape can be generated with some variation of the input parameters. An example is given that shows how the proposed method can be applied successfully to a hull resistance optimization case. The parametric design of the middle submarine type was chosen to be modified. First, the original submarine model was analyzed, in advance, using CFD. Then, using the response surface graph, some candidate optimal designs with a minimum hull resistance coefficient were obtained. Further, the optimization method in goal-driven optimization （GDO） was implemented to find the submarine hull form with the minimum hull resistance coefficient （Ct）. The minimum C, was obtained. The calculated difference in （7, values between the initial submarine and the optimum submarine is around 0.26%, with the C, of the initial submarine and the optimum submarine being 0.001 508 26 and 0.001 504 29, respectively. The results show that the optimum submarine hull form shows a higher nose radius （rn） and higher L/H than those of the initial submarine shape, while the radius of the tail （r1） is smaller than that of the initial shape.
文摘Die casting process is one of the prime options for m anufacturing precisely dimensioned, sharply defined metal parts. The design of d ie casting dies comprises several stages and entails a large amount of time. Tra ditionally, the different stages of the die design were not integrated but exist as separate entities. Moreover, recurring modifications or even redesigns are r equired due to the complexity in achieving an accurate initial die design. As a result, die design is usually time-consuming and costly with respect to resourc es. The die casting industry will greatly benefit if proper application software are developed that integrates the different die design stages and allows editin g of die design as and when needed. Hence it is imperative to create an integrat ed die design system that shortens the die design time. This paper presents a research that establishes a prototype of an integrated die design system. It is developed using the commercial SolidWorks CAD system and n amed DiWorks. The aim of building the system on a commercial CAD system is to ut ilise the resources and features of the CAD system to speed up the die design pr ocess. DiWorks consists of six distinct modules: Project Manager, Cavity Insert Builder, Gating System Constructor, Die Base Designer, Ejector System Constructo r and Standard Components Library. Through these six modules, the die designer c an create a complete die casting die beginning from a product part model. It is a user-friendly system that allows both experienced and novice die designers to easily accomplish the task of die design. The practical goal of this research is twofold: to develop a system that integra tes the die design process and at the same time facilitates the editing of d ie design during or after the course of the design process. The research approac h includes (i) parametric design, (ii) feature-based design (iii) system modeli ng and implementation. Parametric design deals with variable dimensions as contr ol parameters, and it is an efficient tool for creating models based on paramete rs. Parametric design not only increases the design efficiency, but also makes t he updates and modifications of existing designs easier and faster, since these can be achieved by changing the parameters of the parametric model. Feature-bas ed design is used to design a product with features that are functionally define d by attributes and are geometrically represented by a set of parameters. The re sults of this research will aid the automation of the die design process, thus i mproving the efficiency and quality of, and reducing the cost of die design.
基金Project supported by the National Key Lab . of Flexible Manufacturing System Technology ( Grant No.51458060104J W0316) the National High-Tech. R & D Programfor CI MS , China (Grant No.2003AA414033) .
文摘Parametric design of typical parts holds a very important position during process of product designs. In order to develop a parametric design system of typical parts compatible with heterogeneous CAD systems, this paper presents a framework of a network-oriented design system of typical parts, enabled by eXtensible Markup Language (XML), capable of providing parametric design. Firstly, an overview of the framework is presented. In order to map the part feature hierarchy tree of 3D model into an XML tree, an XML-based part template is introduced. The methods of XML-based parametric design and parametric design navigation are described. Finally, an application example of prototype system under the Pro/Engineer platform is given. The application indicates that the proposed framework is valid for parametric design of typical parts/components in heterogeneous CAD systems.
文摘Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modellingis a collaborative process where all stakeholders integrate and optimize their information in a digital 3D model. Sometimes it is called Green BIM. But what exactly is that？ Is the International Standard Organization IFC standard useful for this？ And is it compatible with new developments in parametric design？ Advantages and disadvantages of BIM are listed. Full parametric design is needed because it keeps the design flexible and open for changes until the end of the design process. However it is not compatible with IFC; only object parametric design is. A possible way out of this paradox could be the use of scripts that only create objects if they are not already in the BIM database and otherwise only adapt their properties. An example of parametric sustainable architectural design explains the mentioned issues.
