This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the pred...This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.展开更多
A current-turbidity monitoring system (CTMS) was deployed on the intertidal flat at Wanggang, northern Jiangsu during October 16-17, 2000, to measure the tidal current speeds and seawater turbidities at 5 levels above...A current-turbidity monitoring system (CTMS) was deployed on the intertidal flat at Wanggang, northern Jiangsu during October 16-17, 2000, to measure the tidal current speeds and seawater turbidities at 5 levels above the seabed. Based upon the logarithmic-profile equation, the boundary layer parameters, i.e., u, z0 and C60, were obtained for 247 tidal flow velocity profiles. Around 90% of the profiles were logarithmic according to the critical correlation coefficient. Internal consistency analysis shows that these parameters derived by different methods are consistent with each other. In addition, the height of the bedforms observed is close to the seabed roughness lengths calculated from the velocity profiles, indicating that the boundary layer parameters obtained can reveal the conditions at the sediment-water interface on the intertidal flats. Suspended sediment concentrations were obtained from the 5 CTMS turbidity meters using laboratory and in-situ calibrations. The results show that the in-situ calibrated SSCs have a much higher accuracy than the laboratory calibrated ones. Calculation of suspended sediment fluxes on the intertidal flats, with a magnitude of 104 kg/m per spring tidal cycle, indicates that suspended sediment moves towards the northwest, which is reversal to the transport pattern controlled by the southward Northern Jiangsu Coastal Current in the sub-tidal zone and adjacent shallow waters.展开更多
The mesoscale numerical weather prediction model (MM4) in which the computations of the turbulent exchange coefficient in the boundary layer and surface fluxes are improved, is used to study the influences of boundary...The mesoscale numerical weather prediction model (MM4) in which the computations of the turbulent exchange coefficient in the boundary layer and surface fluxes are improved, is used to study the influences of boundary layer parameterization schemes on the predictive results of the mesoscale model. Seven different experiment schemes (including the original MM4 model) designed in this paper are tested by the observational data of several heavy rain cases so as to find an improved boundary layer parameterization scheme in the mesoscale meteorological model. The results show that all the seven different boundary layer parameterization schemes have some influences on the forecasts of precipitation intensity, distribution of rain area, vertical velocity, vorticity and divergence fields, and the improved schemes in this paper can improve the precipitation forecast. Key words Boundary layer parameterization - Mesoscale numerical weather prediction (MNWP) - Turbulent exchange coefficient - Surface fluxes - Heavy rain This paper was supported by the National Natural Science Foundation of China (Grant No. 49875005 and No. 49735180).展开更多
This paper proposes a method of simultaneous determination of the four layer parameters （mass density, longitudinal velocity, the thickness and attenuation） of an immersed linear-viscoelastic thin layer by using the...This paper proposes a method of simultaneous determination of the four layer parameters （mass density, longitudinal velocity, the thickness and attenuation） of an immersed linear-viscoelastic thin layer by using the normally-incident reflected and transmitted ultrasonic waves. The analytical formula of the layer thickness related to the measured trans- mitted transfer functions is derived. The two determination steps of the four layer parameters are developed, in which acoustic impedance, time-of-flight and attenuation are first determined by the reflected transfer functions. Using the derived formula, it successively calculates and determines the layer thickness, longitudinal velocity and mass density by the measured transmitted transfer functions. According to the two determination steps, a more feasible and simplified measurement setups is described. It is found that only three signals （the reference waves, the reflected and transmitted waves） need to be recorded in the whole measurement for the determination of the four layer parameters. A study of the stability of the determination method against the experimental noises and the error analysis of the four layer parameters are made. This study lays the theoretical foundation of the practical measurement of a linear-viscoelastic thin layer.展开更多
Using mesoscale numerical model WRFV3.7,simulation tests of a low-vortex rainstorm were carried out in Langfang area,and simulation results of three boundary layer parameterization schemes(MYJ,YSU,ACM2)were contrasted...Using mesoscale numerical model WRFV3.7,simulation tests of a low-vortex rainstorm were carried out in Langfang area,and simulation results of three boundary layer parameterization schemes(MYJ,YSU,ACM2)were contrasted.The results showed that the rainstorm in Langfang area had better dynamic condition.By the influence of northeast cold vortex,cold vortex at high altitude cooperated with the surface wind speed convergence,which provided better dynamic condition for strong convective rainfall.Three boundary layer parameterization schemes all simulated surface wind speed convergence of rainstorm center.Simulation results of 24-h rainfall distribution showed that the simulation of YSU scheme was better than ACM2 and MYJ.The simulation results of flow field and temperature field also verified that YSU scheme was better than other schemes.展开更多
Influence of the layer parameters on the performances of the CdTe solar cells is analyzed by SCAPS-1 D. The Zn O: Al film shows a high efficiency than SnO_2:F. Moreover, the thinner window layer and lower defect densi...Influence of the layer parameters on the performances of the CdTe solar cells is analyzed by SCAPS-1 D. The Zn O: Al film shows a high efficiency than SnO_2:F. Moreover, the thinner window layer and lower defect density of Cd S films are the factor in the enhancement of the short-circuit current density. As well, to increase the open-circuit voltage, the responsible factors are low defect density of the absorbing layer CdTe and high metal work function. For the low cost of cell production, ultrathin film CdTe cells are used with a back surface field(BSF) between CdTe and back contact, such as PbTe. Further, the simulation results show that the conversion efficiency of 19.28% can be obtained for the cell with 1-μm-thick CdTe, 0.1-μm-thick PbTe and 30-nm-thick CdS.展开更多
Data collected in the surface layer in a northern suburban area of Nanjing from 15 November to 29 December 2007 were analyzed to examine the MoninObukhov similarity for describing the turbulent fluctu ations of 3D win...Data collected in the surface layer in a northern suburban area of Nanjing from 15 November to 29 December 2007 were analyzed to examine the MoninObukhov similarity for describing the turbulent fluctu ations of 3D winds under all stability conditions and to obtain the turbulence characteristics under different weather conditions. The results show that the dimensionless standard deviations of turbulent velocity com ponents （σ u /u＊ , σ v /u＊ , σ w /u ＊ ） and dimensionless turbulent kinetic energy （TKE） can be well described by ＂1/3＂ power law relationships under stable, neutral, and unstable conditions, with σ u /u ＊ σ v /u ＊ σ w /u＊ . Land use and land cover changes mainly impact dimensionless standard deviations of horizontal component fluctuations, but they have very little on those of the vertical component. The dimensionless standard devi ations of wind components and dimensionless TKE are remarkably affected by different weather conditions; the deviations of horizontal wind component and dimensionless TKE present fog day clear sky overcast cloudy; the trend of the vertical wind component is the reverse. The surface drag coefficient at a Nan jing suburban measurement site during the observation period was obviously higher than at other reported plains and plateau areas, and was approximately one order larger in magnitude than the reported plains areas. Dimensionless standard deviation of temperature declined with increasing ｜z /L｜ with an approximate ＂1/3＂ slope in unstable stratification and ＂2/3＂ slope in stable stratification.展开更多
This paper presents a study of hydromagnetic Couette flow of an incompress- ible and electrically conducting fluid between two parallel rotating plates, one of which is oscillating in its own plane. A uniform transver...This paper presents a study of hydromagnetic Couette flow of an incompress- ible and electrically conducting fluid between two parallel rotating plates, one of which is oscillating in its own plane. A uniform transverse magnetic field is used, and the induced magnetic field is taken into account. The exact solution to the governing equations is obtained in a closed form. The solution to the problem in the case of vanishing and small finite magnetic Prandtl numbers is also derived from the general solution. The asymp- totic behavior of the solution for large values of the frequency parameter is analyzed to gain some physical insights into the flow pattern. Expressions for the shear stress at both the oscillatory and stationary plates due to primary and secondary flows and mass flow rate in the primary and secondary flow directions are also obtained. The results of the fluid velocity and the induced magnetic field are presented. The shear stresses on the plates due to the primary and secondary flows and the corresponding mass flow rates are presented in a tabular form.展开更多
The optical parameters for three samples of intrinsic, doped Si and doped Mg (Al x Ga 1- x ) y In 1- y P prepared by the MOCVD on GaAs substrate were measured by using ellipsometry and were calc...The optical parameters for three samples of intrinsic, doped Si and doped Mg (Al x Ga 1- x ) y In 1- y P prepared by the MOCVD on GaAs substrate were measured by using ellipsometry and were calculated by the two-layer absorption film model. The results obtained were discussed. The grown rates and thickness of oxidic layer on the intrinsic (Al x Ga 1- x ) y In 1- y P surface exposed in the atmosphere were studied. A linear dependence of oxidic layer thickness on the time was obtained.展开更多
The planetary boundary layer （PBL） scheme in the regional climate model （RCM） has a significant impact on the interactions and exchanges of moisture, momentum, and energy between land, ocean, and atmosphere; howev...The planetary boundary layer （PBL） scheme in the regional climate model （RCM） has a significant impact on the interactions and exchanges of moisture, momentum, and energy between land, ocean, and atmosphere; however, its uncertainty will cause large systematic biases of RCM. Based on the four different PBL schemes （YSU, ACM2, Boulac, and MYJ） in Weather Research and Forecasting （WRF） model, the impacts of these schemes on the simulation of circulation and precipitation during the East Asian summer monsoon （EASM） are investigated. The simulated results of the two local turbulent kinetic energy （TKE） schemes, Boulac and MYJ, are more consistent with the observations than those in the two nonlocal closure schemes, YSU and ACM2. The former simulate more reasonable low-level southwesterly flow over East China and west pacific subtropical high （WPSH） than the latter. As to the modeling of summer monsoon precipitation, both the spatial distributions and temporal evolutions from Boulac and MTT are also better than those in YSU and ACM2 schemes. In addition, through the comparison between YSU and Boulac experiments, the differences from the results of EASM simulation are more obvious over the oceanic area. In the experiments with the nonlocal schemes YSU and ACM2, the boundary layer mixing processes are much stronger, which lead to produce more sea surface latent heat flux and enhanced convection, and finally induce the overestimated precipitation and corresponding deviation of monsoon circulation. With the further study, it is found that the absence of air-sea interaction in WRF may amplify the biases caused by PBL scheme over the ocean. Consequently, there is a reduced latent heat flux over the sea surface and even more reasonable EASM simulation, if an ocean model coupled into WRF.展开更多
Treatments of the boundary layer in a five-layer primitive equation model with mixed P—σ coordinates are improved by incorporating similarity theory,which is widely used at present.Two kinds of parameterization sche...Treatments of the boundary layer in a five-layer primitive equation model with mixed P—σ coordinates are improved by incorporating similarity theory,which is widely used at present.Two kinds of parameterization schemes of the boundary layer are designed,and static test and numerical simulation are performed.It is found that the iterative scheme can fairly improve the simulation of the mean climate field in July.The abnormally strong heat low over the Tibetan Plateau is weakened to some extent.展开更多
The remote measurement of the vertical distribution of acoustical parameters of the sea bottom is an inverse method in acoustics. The existing methods can be divided into two types: the wave method and the ray method....The remote measurement of the vertical distribution of acoustical parameters of the sea bottom is an inverse method in acoustics. The existing methods can be divided into two types: the wave method and the ray method. The former usually does not apply to cases with discontinuity in acoustical parameter profiles[1] , whereas the latter usually ignores the contributions made by multiple reflections, resulting in the appearance of pseudo interfaces. However, under certain practical circumstances, the ray method can produce satisfactory results[2,3]. In this paper, at first we use the conception of equitime layer thickness to obtain the pulse response iteration method. The anti-interference capability of this method is poor. In order to improve this capability, we develope the sample iteration method and the sample-averaging iteration method. The sample-averaging iteration method introduces a way of statistical averaging, which can further improve the anti-interference capability.展开更多
In this paper,under the assumption of neutral and barotropic atmosphere,by means of the analytic solution of motion equation of PBL,the influences of nonstationary process on the internal parameters u_*/A(A is the win...In this paper,under the assumption of neutral and barotropic atmosphere,by means of the analytic solution of motion equation of PBL,the influences of nonstationary process on the internal parameters u_*/A(A is the wind speed at the top of PBL)and ■(the angle between winds near the surface and at the top of PBL)of PBL are investigated in which the wind direction at the top of PBL is a periodic function of time but the wind speed at the top of PBL does not change.The u_*/A increases and ■ decreases when the wind direction at the top of PBL rotates anticlockwise and vice versa.Hence the parameterization of PBL in the large-scale models derived under the stationary condition should be corrected by accounting for the nonstationary process.The similar results are obtained in the numerical solution of the motion equation of PBL.The influences of this nonstationary process on the profiles of the wind in PBL are also analyzed.展开更多
基金supported by the National Key R&D Program of China[grant number 2023YFC3008004]。
文摘This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.
文摘A current-turbidity monitoring system (CTMS) was deployed on the intertidal flat at Wanggang, northern Jiangsu during October 16-17, 2000, to measure the tidal current speeds and seawater turbidities at 5 levels above the seabed. Based upon the logarithmic-profile equation, the boundary layer parameters, i.e., u, z0 and C60, were obtained for 247 tidal flow velocity profiles. Around 90% of the profiles were logarithmic according to the critical correlation coefficient. Internal consistency analysis shows that these parameters derived by different methods are consistent with each other. In addition, the height of the bedforms observed is close to the seabed roughness lengths calculated from the velocity profiles, indicating that the boundary layer parameters obtained can reveal the conditions at the sediment-water interface on the intertidal flats. Suspended sediment concentrations were obtained from the 5 CTMS turbidity meters using laboratory and in-situ calibrations. The results show that the in-situ calibrated SSCs have a much higher accuracy than the laboratory calibrated ones. Calculation of suspended sediment fluxes on the intertidal flats, with a magnitude of 104 kg/m per spring tidal cycle, indicates that suspended sediment moves towards the northwest, which is reversal to the transport pattern controlled by the southward Northern Jiangsu Coastal Current in the sub-tidal zone and adjacent shallow waters.
文摘The mesoscale numerical weather prediction model (MM4) in which the computations of the turbulent exchange coefficient in the boundary layer and surface fluxes are improved, is used to study the influences of boundary layer parameterization schemes on the predictive results of the mesoscale model. Seven different experiment schemes (including the original MM4 model) designed in this paper are tested by the observational data of several heavy rain cases so as to find an improved boundary layer parameterization scheme in the mesoscale meteorological model. The results show that all the seven different boundary layer parameterization schemes have some influences on the forecasts of precipitation intensity, distribution of rain area, vertical velocity, vorticity and divergence fields, and the improved schemes in this paper can improve the precipitation forecast. Key words Boundary layer parameterization - Mesoscale numerical weather prediction (MNWP) - Turbulent exchange coefficient - Surface fluxes - Heavy rain This paper was supported by the National Natural Science Foundation of China (Grant No. 49875005 and No. 49735180).
基金supported by the National Natural Science Foundation of China (Grant Nos. 10534040 and 40674059)the State Key Laboratory of Acoustics (IACAS) (Grant No. 200807)
文摘This paper proposes a method of simultaneous determination of the four layer parameters （mass density, longitudinal velocity, the thickness and attenuation） of an immersed linear-viscoelastic thin layer by using the normally-incident reflected and transmitted ultrasonic waves. The analytical formula of the layer thickness related to the measured trans- mitted transfer functions is derived. The two determination steps of the four layer parameters are developed, in which acoustic impedance, time-of-flight and attenuation are first determined by the reflected transfer functions. Using the derived formula, it successively calculates and determines the layer thickness, longitudinal velocity and mass density by the measured transmitted transfer functions. According to the two determination steps, a more feasible and simplified measurement setups is described. It is found that only three signals （the reference waves, the reflected and transmitted waves） need to be recorded in the whole measurement for the determination of the four layer parameters. A study of the stability of the determination method against the experimental noises and the error analysis of the four layer parameters are made. This study lays the theoretical foundation of the practical measurement of a linear-viscoelastic thin layer.
文摘Using mesoscale numerical model WRFV3.7,simulation tests of a low-vortex rainstorm were carried out in Langfang area,and simulation results of three boundary layer parameterization schemes(MYJ,YSU,ACM2)were contrasted.The results showed that the rainstorm in Langfang area had better dynamic condition.By the influence of northeast cold vortex,cold vortex at high altitude cooperated with the surface wind speed convergence,which provided better dynamic condition for strong convective rainfall.Three boundary layer parameterization schemes all simulated surface wind speed convergence of rainstorm center.Simulation results of 24-h rainfall distribution showed that the simulation of YSU scheme was better than ACM2 and MYJ.The simulation results of flow field and temperature field also verified that YSU scheme was better than other schemes.
文摘Influence of the layer parameters on the performances of the CdTe solar cells is analyzed by SCAPS-1 D. The Zn O: Al film shows a high efficiency than SnO_2:F. Moreover, the thinner window layer and lower defect density of Cd S films are the factor in the enhancement of the short-circuit current density. As well, to increase the open-circuit voltage, the responsible factors are low defect density of the absorbing layer CdTe and high metal work function. For the low cost of cell production, ultrathin film CdTe cells are used with a back surface field(BSF) between CdTe and back contact, such as PbTe. Further, the simulation results show that the conversion efficiency of 19.28% can be obtained for the cell with 1-μm-thick CdTe, 0.1-μm-thick PbTe and 30-nm-thick CdS.
基金provided by the Natural Science Fund for Universities in Jiangsu Province (Grant No 08KJA170002)the Meteorology Fund of the Ministry of Science and Technology [Grant No GYHY(QX) 2007-6-26]+3 种基金the National Natural Science Foundation of China (Grant No 40775012)the National Key Technology R&D Program (Grant No 2008BAC48B01)the Qing-Lan Project for Cloud-Fog-Precipitation-Aerosol Study in Jiangsu Province, the Graduate Student Innovation Plan for the Universities of Jiangsu Province (Grant No CX10B 292Z)a Project Funded by the Priority Academic Development of Jiangsu Higher Education Institutions
文摘Data collected in the surface layer in a northern suburban area of Nanjing from 15 November to 29 December 2007 were analyzed to examine the MoninObukhov similarity for describing the turbulent fluctu ations of 3D winds under all stability conditions and to obtain the turbulence characteristics under different weather conditions. The results show that the dimensionless standard deviations of turbulent velocity com ponents （σ u /u＊ , σ v /u＊ , σ w /u ＊ ） and dimensionless turbulent kinetic energy （TKE） can be well described by ＂1/3＂ power law relationships under stable, neutral, and unstable conditions, with σ u /u ＊ σ v /u ＊ σ w /u＊ . Land use and land cover changes mainly impact dimensionless standard deviations of horizontal component fluctuations, but they have very little on those of the vertical component. The dimensionless standard devi ations of wind components and dimensionless TKE are remarkably affected by different weather conditions; the deviations of horizontal wind component and dimensionless TKE present fog day clear sky overcast cloudy; the trend of the vertical wind component is the reverse. The surface drag coefficient at a Nan jing suburban measurement site during the observation period was obviously higher than at other reported plains and plateau areas, and was approximately one order larger in magnitude than the reported plains areas. Dimensionless standard deviation of temperature declined with increasing ｜z /L｜ with an approximate ＂1/3＂ slope in unstable stratification and ＂2/3＂ slope in stable stratification.
文摘This paper presents a study of hydromagnetic Couette flow of an incompress- ible and electrically conducting fluid between two parallel rotating plates, one of which is oscillating in its own plane. A uniform transverse magnetic field is used, and the induced magnetic field is taken into account. The exact solution to the governing equations is obtained in a closed form. The solution to the problem in the case of vanishing and small finite magnetic Prandtl numbers is also derived from the general solution. The asymp- totic behavior of the solution for large values of the frequency parameter is analyzed to gain some physical insights into the flow pattern. Expressions for the shear stress at both the oscillatory and stationary plates due to primary and secondary flows and mass flow rate in the primary and secondary flow directions are also obtained. The results of the fluid velocity and the induced magnetic field are presented. The shear stresses on the plates due to the primary and secondary flows and the corresponding mass flow rates are presented in a tabular form.
文摘The optical parameters for three samples of intrinsic, doped Si and doped Mg (Al x Ga 1- x ) y In 1- y P prepared by the MOCVD on GaAs substrate were measured by using ellipsometry and were calculated by the two-layer absorption film model. The results obtained were discussed. The grown rates and thickness of oxidic layer on the intrinsic (Al x Ga 1- x ) y In 1- y P surface exposed in the atmosphere were studied. A linear dependence of oxidic layer thickness on the time was obtained.
基金jointly sponsored by the "Strategic Priority Research Program-Climate Change: Carbon Budget and Related Issue" of the Chinese Academy of Sciences (Grant No. XDA-05110303)the Opening Fund of Key Laboratory for Land Surface Process and Climate Change in Cold and Arid Regions, CAS, the National Basic Research Program of China (Grant No.2010CB951703)the Social Common Weal Profession Research Program of Chinese Ministry of Finance/Ministry of Science and Technology (Grant No. GYHY201006014)
文摘The planetary boundary layer （PBL） scheme in the regional climate model （RCM） has a significant impact on the interactions and exchanges of moisture, momentum, and energy between land, ocean, and atmosphere; however, its uncertainty will cause large systematic biases of RCM. Based on the four different PBL schemes （YSU, ACM2, Boulac, and MYJ） in Weather Research and Forecasting （WRF） model, the impacts of these schemes on the simulation of circulation and precipitation during the East Asian summer monsoon （EASM） are investigated. The simulated results of the two local turbulent kinetic energy （TKE） schemes, Boulac and MYJ, are more consistent with the observations than those in the two nonlocal closure schemes, YSU and ACM2. The former simulate more reasonable low-level southwesterly flow over East China and west pacific subtropical high （WPSH） than the latter. As to the modeling of summer monsoon precipitation, both the spatial distributions and temporal evolutions from Boulac and MTT are also better than those in YSU and ACM2 schemes. In addition, through the comparison between YSU and Boulac experiments, the differences from the results of EASM simulation are more obvious over the oceanic area. In the experiments with the nonlocal schemes YSU and ACM2, the boundary layer mixing processes are much stronger, which lead to produce more sea surface latent heat flux and enhanced convection, and finally induce the overestimated precipitation and corresponding deviation of monsoon circulation. With the further study, it is found that the absence of air-sea interaction in WRF may amplify the biases caused by PBL scheme over the ocean. Consequently, there is a reduced latent heat flux over the sea surface and even more reasonable EASM simulation, if an ocean model coupled into WRF.
基金National Natural Science Foundation of China(49735170).
文摘Treatments of the boundary layer in a five-layer primitive equation model with mixed P—σ coordinates are improved by incorporating similarity theory,which is widely used at present.Two kinds of parameterization schemes of the boundary layer are designed,and static test and numerical simulation are performed.It is found that the iterative scheme can fairly improve the simulation of the mean climate field in July.The abnormally strong heat low over the Tibetan Plateau is weakened to some extent.
文摘The remote measurement of the vertical distribution of acoustical parameters of the sea bottom is an inverse method in acoustics. The existing methods can be divided into two types: the wave method and the ray method. The former usually does not apply to cases with discontinuity in acoustical parameter profiles[1] , whereas the latter usually ignores the contributions made by multiple reflections, resulting in the appearance of pseudo interfaces. However, under certain practical circumstances, the ray method can produce satisfactory results[2,3]. In this paper, at first we use the conception of equitime layer thickness to obtain the pulse response iteration method. The anti-interference capability of this method is poor. In order to improve this capability, we develope the sample iteration method and the sample-averaging iteration method. The sample-averaging iteration method introduces a way of statistical averaging, which can further improve the anti-interference capability.
文摘In this paper,under the assumption of neutral and barotropic atmosphere,by means of the analytic solution of motion equation of PBL,the influences of nonstationary process on the internal parameters u_*/A(A is the wind speed at the top of PBL)and ■(the angle between winds near the surface and at the top of PBL)of PBL are investigated in which the wind direction at the top of PBL is a periodic function of time but the wind speed at the top of PBL does not change.The u_*/A increases and ■ decreases when the wind direction at the top of PBL rotates anticlockwise and vice versa.Hence the parameterization of PBL in the large-scale models derived under the stationary condition should be corrected by accounting for the nonstationary process.The similar results are obtained in the numerical solution of the motion equation of PBL.The influences of this nonstationary process on the profiles of the wind in PBL are also analyzed.
