Laser-assisted drilling combined with full-size polycrystalline diamond compact(PDC)bit is considered a feasible solution to enhance the drilling performance of engineering machinery.In this method,determining the opt...Laser-assisted drilling combined with full-size polycrystalline diamond compact(PDC)bit is considered a feasible solution to enhance the drilling performance of engineering machinery.In this method,determining the optimal collaborative control parameters that support rapid drilling is crucial for improving the combined performance.This study used average drilling speed,average torque,and total specificenergy for quantitative analysis to characterize the efficiencyand economy of combined rock breaking.Given the advantage of the response surface methodology in providing high-precision predictions with limited experimental data,regression models of the average drilling speed,average torque,and total specificenergy were established.The results showed that as the laser power and irradiation time increased,the average drilling speed firstincreased rapidly and then leveled off,while the average torque decreased sharply before decelerating.The total specificenergy initially decreased and then increased,with the combined drilling outperforming conventional mechanical drilling within specific parameter ranges.As the weight on bit increased,both the average torque and total specificenergy first decreased and then increased.With rising rotating speed,the average torque exhibited a trend of initial increase,then decrease,and finalincrease,whereas the total specificenergy increased slowly at firstand then sharply.Both parameters exhibited optimal values at which the average torque and total specific energy remained at minimal levels.For granite combined drilling,the optimal performance was achieved at a laser power of 3000 W,irradiation time of 31 s,the weight on bit of 2.4 kN,and the rotating speed of 97 r/min.展开更多
(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbi...(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.展开更多
Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.W...Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.展开更多
Hepatocellular carcinoma presents with three distinct immune phenotypes,including immune-desert,immune-excluded,and immune-inflamed,indicating various treatment responses and prognostic outcomes.The clinical applicati...Hepatocellular carcinoma presents with three distinct immune phenotypes,including immune-desert,immune-excluded,and immune-inflamed,indicating various treatment responses and prognostic outcomes.The clinical application of multi-omics parameters is still restricted by the expensive and less accessible assays,although they accurately reflect immune status.A comprehensive evaluation framework based on“easy-to-obtain”multi-model clinical parameters is urgently required,incorporating clinical features to establish baseline patient profiles and disease staging;routine blood tests assessing systemic metabolic and functional status;immune cell subsets quantifying subcluster dynamics;imaging features delineating tumor morphology,spatial configuration,and perilesional anatomical relationships;immunohistochemical markers positioning qualitative and quantitative detection of tumor antigens from the cellular and molecular level.This integrated phenomic approach aims to improve prognostic stratification and clinical decision-making in hepatocellular carcinoma management conveniently and practically.展开更多
The internal flow fields within a three-dimensional inward-tunning combined inlet are extremely complex,especially during the engine mode transition,where the tunnel changes may impact the flow fields significantly.To...The internal flow fields within a three-dimensional inward-tunning combined inlet are extremely complex,especially during the engine mode transition,where the tunnel changes may impact the flow fields significantly.To develop an efficient flow field reconstruction model for this,we present an Improved Conditional Denoising Diffusion Generative Adversarial Network(ICDDGAN),which integrates Conditional Denoising Diffusion Probabilistic Models(CDDPMs)with Style GAN,and introduce a reconstruction discrimination mechanism and dynamic loss weight learning strategy.We establish the Mach number flow field dataset by numerical simulation at various backpressures for the mode transition process from turbine mode to ejector ramjet mode at Mach number 2.5.The proposed ICDDGAN model,given only sparse parameter information,can rapidly generate high-quality Mach number flow fields without a large number of samples for training.The results show that ICDDGAN is superior to CDDGAN in terms of training convergence and stability.Moreover,the interpolation and extrapolation test results during backpressure conditions show that ICDDGAN can accurately and quickly reconstruct Mach number fields at various tunnel slice shapes,with a Structural Similarity Index Measure(SSIM)of over 0.96 and a Mean-Square Error(MSE)of 0.035%to actual flow fields,reducing time costs by 7-8 orders of magnitude compared to Computational Fluid Dynamics(CFD)calculations.This can provide an efficient means for rapid computation of complex flow fields.展开更多
Presented in this study is a novel method for estimating the depth of single underwater source in shallow water,utilizing vector sensors.The approach leverages the depth distribution of the broadband Stokes parameters...Presented in this study is a novel method for estimating the depth of single underwater source in shallow water,utilizing vector sensors.The approach leverages the depth distribution of the broadband Stokes parameters to estimate source depth accurately.Unlike traditional matched field processing(MFP)and matched mode processing(MMP),the proposed approach can estimate source depth directly from the data received by sensors without requiring complete environmental information.Firstly,the broadband Stokes parameters(BSP)are established using the normal mode theory.Then the nonstationary phase approximation is used to simplify the theoretical derivation,which is necessary when dealing with broadband integrals.Additionally,range terms of the BSP are eliminated by normalization.By analyzing the depth distribution of the normalized broadband Stokes parameters(NBSP),it is found that the NBSP exhibit extreme values at the source depth,which can be used for source depth estimation.So the proposed depth estimation method is based on searching the peaks of the NBSP.Simulations show that this method is effective in relatively simple shallow water environments.Finally,the effect of source range,frequency bandwidth,sound speed profile(SSP),water depth,and signal-to-noise ratio(SNR)are studied.The findings indicate that the proposed method can accurately estimate the source depth when the SNR is greater than-5 d B and does not need to consider model mismatch issues.Additionally,variations in environmental parameters have minimal impact on estimation accuracy.Compared to MFP,the proposed method requires a higher SNR,but demonstrates superior robustness against fluctuations in environmental parameters.展开更多
This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the pred...This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.展开更多
The S38C railway axle undergoes induction hardening,resulting in a gradient-distributed microstructure and mechanical properties.The accurate identification of gradient-distributed plastic parameters for the S38C axle...The S38C railway axle undergoes induction hardening,resulting in a gradient-distributed microstructure and mechanical properties.The accurate identification of gradient-distributed plastic parameters for the S38C axle remains a challenging task.To tackle this challenge,the present study proposes a novel approach for identifying the gradient-distributed plastic parameters for the S38C axle by integrating nano-indentation techniques with the machine learning method.Firstly,nano-indentation tests are conducted along the radial direction of the S38C axle to obtain the gradient-distributed load-displacement curves,nano-hardness,and elastic modulus.Subsequently,the dimensionless analysis is performed to obtain the representative stress,strain,and yield stress from load-displacement curves.These parameters are then incorporated into the machine learning method as physical information to identify the gradient-distributed plastic parameters of the S38C axle.The results indicate that the proposed method based on the physics-informed neural network and multi-fidelity neural network successfully identifies the gradient-distributed plastic parameters of the S38C axles and demonstrates superior prediction accuracy and generalization compared with the purely data-driven machine learning method.展开更多
As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalen...As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).展开更多
Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introdu...Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.展开更多
BACKGROUND Sagittal spinopelvic alignment(SSA)is essential for preserving a stable and effective upright posture and locomotion.Although alterations in the SSA are recognised to induce compensatory modifications in th...BACKGROUND Sagittal spinopelvic alignment(SSA)is essential for preserving a stable and effective upright posture and locomotion.Although alterations in the SSA are recognised to induce compensatory modifications in the pelvis,hips,and knees,the inverse relationship concerning knee pathology undergoing total knee arthroplasty(TKA)has been examined by a limited number of studies,yielding inconclusive results.AIM To generate evidence of the effect of TKA on the SSA from existing literature.METHODS Databases like PubMed,EMBASE,and Scopus were used to identify articles related to the“knee spine syndrome”phenomenon using a combination of subject terms and keywords such as“spinopelvic parameters”,“sagittal spinal balance”,and“total knee arthroplasty”were used with appropriate Boolean operators.Studies measuring the SSA following TKA were included,and research was conducted as per preferred reporting items for systematic review and metaanalysis guidelines.RESULTS A total of 475 participants had undergone TKA,and six studies measuring SSA were analysed.Following TKA,pelvic tilt was the only parameter that showed significant changes,while lumbar lordosis(LL),pelvic incidence,and sacral slope were non-significant,as evident from the forest plots.CONCLUSION The body's sagittal alignment is a complex balance between pelvic,spine,and lower extremity parameters.TKA,while having the potential to correct the flexion contracture,can also correct it.Still,the primary SSA for spinal pathology,i.e.,LL,may not be corrected in patients with co-existent spinal degenerative disease.展开更多
Atlantic Meridional Overturning Circulation(AMOC)plays a central role in long-term climate variations through its heat and freshwater transports,which can collapse under a rapid increase of greenhouse gas forcing in c...Atlantic Meridional Overturning Circulation(AMOC)plays a central role in long-term climate variations through its heat and freshwater transports,which can collapse under a rapid increase of greenhouse gas forcing in climate models.Previous studies have suggested that the deviation of model parameters is one of the major factors in inducing inaccurate AMOC simulations.In this work,with a low-resolution earth system model,the authors try to explore whether a reasonable adjustment of the key model parameter can help to re-establish the AMOC after its collapse.Through a new optimization strategy,the extra freshwater flux(FWF)parameter is determined to be the dominant one affecting the AMOC’s variability.The traditional ensemble optimal interpolation(EnOI)data assimilation and new machine learning methods are adopted to optimize the FWF parameter in an abrupt 4×CO_(2) forcing experiment to improve the adaptability of model parameters and accelerate the recovery of AMOC.The results show that,under an abrupt 4×CO_(2) forcing in millennial simulations,the AMOC will first collapse and then re-establish by the default FWF parameter slowly.However,during the parameter adjustment process,the saltier and colder sea water over the North Atlantic region are the dominant factors in usefully improving the adaptability of the FWF parameter and accelerating the recovery of AMOC,according to their physical relationship with FWF on the interdecadal timescale.展开更多
In the field of antenna engineering parameter calibration for indoor communication base stations,traditional methods suffer from issues such as low efficiency,poor accuracy,and limited applicability to indoor scenario...In the field of antenna engineering parameter calibration for indoor communication base stations,traditional methods suffer from issues such as low efficiency,poor accuracy,and limited applicability to indoor scenarios.To address these problems,a high-precision and high-efficiency indoor base station parameter calibration method based on laser measurement is proposed.We use a high-precision laser tracker to measure and determine the coordinate system transformation relationship,and further obtain the coordinates and attitude of the base station.In addition,we propose a simple calibration method based on point cloud fitting for specific scenes.Simulation results show that using common commercial laser trackers,we can achieve a coordinate correction accuracy of 1 cm and an angle correction accuracy of 0.25°,which is sufficient to meet the needs of wireless positioning.展开更多
The high-speed winding spindle employs a flexible support system incorporating rubber O-rings.By precisely configuring the structural parameters and the number of the O-rings,the spindle can stably surpass its critica...The high-speed winding spindle employs a flexible support system incorporating rubber O-rings.By precisely configuring the structural parameters and the number of the O-rings,the spindle can stably surpass its critical speed points and maintain operational stability across the entire working speed range.However,the support stiffness and damping of rubber O-rings exhibit significant nonlinear frequency dependence.Conventional experimental methods for deriving equivalent stiffness and damping,based on the principle of the forced non-resonance method,require fabricating custom setups for each O-ring specification and conducting vibration tests at varying frequencies,resulting in low efficiency and high costs.This study proposes a hybrid simulation-experimental method for dynamic parameter identification.Firstly,the frequency-dependent dynamic parameters of a specific O-ring support system are experimentally obtained.Subsequently,a corresponding parametric finite element model is established to simulate and solve the equivalent elastic modulus and equivalent stiffness-damping coefficient of this O-ring support system.Ultimately,after iterative simulation,the simulated and experimental results achieve a 99.7%agreement.The parametric finite element model developed herein can directly simulate and inversely estimate frequency-dependent dynamic parameters for O-rings of different specifications but identical elastic modulus.展开更多
The research on ocean dynamics information plays a crucial role in understanding ocean phenomena, assessing marine environmental impacts, and guiding engineering designs. The Doppler information observed by radars ref...The research on ocean dynamics information plays a crucial role in understanding ocean phenomena, assessing marine environmental impacts, and guiding engineering designs. The Doppler information observed by radars reflects sea surface dynamics, to which ocean waves make important contributions. Low-incidence-angle real aperture radar(RAR)demonstrates great potential for independently observing vectorial Doppler information on the ocean surface. To systematically characterize and accurately estimate the wave-induced Doppler frequency shift(WVF) from lowincidence-angle RAR, this study conducts comprehensive influencing factor analysis and establishes sea-stateparameterized WVF models. First, a simulated WVF dataset is generated under a rotating low-incidence-angle RAR.The feature parameters of WVF are then determined by analysing contributing factors including wind waves, swells,and sea state parameters. Furthermore, two WVF models(WVF_Ku P9 with 9 inputs and WVF_Ku P4 with 4 inputs) are constructed by the Transformer encoder for different application scenarios. Both models achieve high accuracy for WVF estimation with root mean square errors(RMSE) of 1.874 Hz and 2.716 Hz, respectively. The reliability and superiority of the proposed models are validated through comparisons with the Ka DOP, which is a typical geophysical model function(GMF). The findings in this paper advance the understanding of WVF characteristics and generation mechanisms. The proposed estimation models can provide reliable estimates, offering critical references for lowincidence-angle RAR applications such as ocean surface current retrieval.展开更多
The current investigation focuses on intertwined relationships of ecology and aquaculture for the benefit of farmers involved in fish farming practices.The study evaluated glucosinolate reduction in black,brown,and wh...The current investigation focuses on intertwined relationships of ecology and aquaculture for the benefit of farmers involved in fish farming practices.The study evaluated glucosinolate reduction in black,brown,and white mustard meals as fish feed ingredients for Indian Major Carps.Fish were fed with 10%mustard meal-supplemented diets in three forms:Raw(R),Anti-nutritional Rich(AR),and Anti-nutritional Lowered(AL),alongside a control group using floating feed.The three-month indoor experiment(September-November 2023)was conducted in FRP tanks with triplicate treatments.Blood analysis revealed compromised health in AR-fed carps,with reduced hemoglobin levels in rohu,catla and mrigal and elevated total leukocyte counts indicating inflammation in all the three carps studied here.Liver function was impaired in AR-fed fish,shown by increased alanine transaminase levels,highest in rohu followed by mrigal and catla.Histopathological examination of AR-fed carps liver tissue revealed necrotic spots,deformed hepatocytes,and significant vacuolation.In contrast,AL-fed fish demonstrated improved health parameters through Complete Blood Count analysis,liver function tests,and histo-pathological observations,suggesting successful reduction of anti-nutritional factors in the processed mustard meals.In near future,replacement of unprocessed seed meal with processed seed meal will lead to economic gains in fish farming.展开更多
BACKGROUND Pancreatic cystic neoplasms(PCNs)are increasingly detected due to advancements in radiographic techniques,with a prevalence of approximately 15%in the general population.These lesions range from benign to p...BACKGROUND Pancreatic cystic neoplasms(PCNs)are increasingly detected due to advancements in radiographic techniques,with a prevalence of approximately 15%in the general population.These lesions range from benign to premalignant and malignant,posing a diagnostic challenge.Accurate differentiation is critical,as premalignant and malignant PCNs often require surgical intervention,while benign cysts may only need monitoring unless symptomatic.Current diagnostic methods,including cross-sectional imaging,endoscopic ultrasonography,and endoscopic ultrasonography-guided fine-needle aspiration/biopsy,are specialized,not universally available,and have variable accuracy.Clinical and laboratory parameters such as carbohydrate antigen 19-9(CA 19-9),neutrophillymphocyte ratio,platelet-lymphocyte ratio,and red cell distribution width(RDW)have been associated with malignancy risk,though only CA 19-9 is guideline-supported.AIM To assess the malignancy risk of PCNs using preoperative clinical and routine laboratory parameters.METHODS A retrospective cohort study analyzed 70 patients who underwent surgery for PCNs at Ankara Bilkent City Hospital between February 2019 and March 2023.Patients were categorized into group A(benign or low-grade dysplasia,n=40)and group B(malignancy or high-grade dysplasia,n=30)based on postoperative pathology.Preoperative demographic and laboratory parameters,including age,RDW,albumin,and CA 19-9,were compared.Univariate and multivariate logistic regression analyses identified independent predictors of malignancy.Receiver operating characteristic curve analysis evaluated predictive performance,with internal validation using bootstrapping.RESULTS Group B patients were older(69.86±9.58 years vs 52.74±16.85 years,P<0.001)and had a higher incidence of diabetes mellitus(57.1%vs 21.4%,P=0.002).RDW(16.2%vs 13.7%,P<0.001),platelet-lymphocyte ratio(178 vs 126,P=0.008),and CA 19-9(21.7 U/mL vs 9.3 U/mL,P=0.009)were significantly higher in group B,while albumin was lower(41 g/L vs 45 g/L,P=0.008).Multivariate analysis identified age[odds ratio=1.067,95%confidence interval(CI):1.014-1.122,P=0.012]and RDW(odds ratio=1.784,95%CI:1.172-2.715,P=0.007)as independent predictors.The area under the curve for age,RDW,and their combination was 0.798(95%CI:0.695-0.900),0.801(95%CI:0.692-0.911),and 0.858(95%CI:0.771-0.944),respectively,with bootstrapped validation confirming stability.Cut-off values of age≥60 years and RDW≥15.5%balanced sensitivity and specificity,increasing malignancy risk 15.3-fold and 22.6-fold,respectively.CONCLUSION Age and RDW are independent predictors of malignancy in PCNs,aiding in patient selection for advanced diagnostics and surgery.Larger,multicenter studies are needed to validate these findings.展开更多
The estimation of orientation parameters and correction of lens distortion are crucial problems in the field of Unmanned Aerial Vehicles(UAVs)photogrammetry.In recent years,the utilization of UAVs for aerial photogram...The estimation of orientation parameters and correction of lens distortion are crucial problems in the field of Unmanned Aerial Vehicles(UAVs)photogrammetry.In recent years,the utilization of UAVs for aerial photogrammetry has witnessed a surge in popularity.Typically,UAVs are equipped with low-cost non-metric cameras and a Position and Orientation System(POS).Unfortunately,the Interior Orientation Parameters(IOPs)of the non-metric cameras are not fixed.Whether the lens distortions are large or small,they effect the image coordinates accordingly.Additionally,Inertial Measurement Units(IMUs)often have observation errors.To address these challenges and improve parameter estimation for UAVs Light Detection and Ranging(LiDAR)and photogrammetry,this paper analyzes the accuracy of POS observations obtained from Global Navigation Satellite System Real Time Kinematic(GNSS-RTK)and IMU data.A method that incorporates additional known conditions for parameter estimation,a series of algorithms to simultaneously solve for IOPs,Exterior Orientation Parameters(EOPs),and camera lens distortion correction parameters are proposed.Extensive experiments demonstrate that the coordinates measured by GNSS-RTK can be directly used as linear EOPs;however,angular EOP measurements from IMUs exhibit relatively large errors compared to adjustment results and require correction during the adjustment process.The IOPs of non-metric cameras vary slightly between images but need to be treated as unknown parameters in high precision applications.Furthermore,it is found that the Ebner systematic error model is sensitive to the choice of the magnification parameter of the photographic baseline length in images,it should be set as less than or equal to one third of the photographic baseline to ensure stable solutions.展开更多
In this paper,the authors prove that the parameterized area integralμ_(Ω,S)^(ρ)and the parameterized Littlewood-Paley g_(δ)^(*)-functionμ_(Ω,δ)^(*,ρ)are bounded on two-weight grand homogeneous variable Herz-Mo...In this paper,the authors prove that the parameterized area integralμ_(Ω,S)^(ρ)and the parameterized Littlewood-Paley g_(δ)^(*)-functionμ_(Ω,δ)^(*,ρ)are bounded on two-weight grand homogeneous variable Herz-Morrey spaces MK_(p),θ,q(·))^(α(·),λ)(ω_(1),ω_(2)),where θ>0,λ∈(2,∞),q(·)∈B(R^(n)),α(·)∈L^(∞)(R^(n)),ω_(1)∈A_(p_(ω_(1)))for p_(ω_(1))∈[1,∞]and ω_(2) is a weight.Furthermore,the authors prove that the commutators[b,μ_(Ω,S)^(ρ)]which is formed by b∈BMO(R^(n))and the μ_(Ω,S)^(ρ),and the[b,μ_(Ω,δ)^(*,ρ)]generated by b∈BMO(R^(n))and theμ_(Ω,δ)^(*,ρ)are bounded on MK_(p),θ,q(·))^(α(·),λ)(ω_(1),ω_(2)),respectively.展开更多
Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters accordi...Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.展开更多
基金funded by the National Natural Science Foundation of China(Grand No.52325904)National Key Research and Development Program of China(Grant No.2023YFB2390200)the National Natural Science Foundation of China(Grant No.52309134).
文摘Laser-assisted drilling combined with full-size polycrystalline diamond compact(PDC)bit is considered a feasible solution to enhance the drilling performance of engineering machinery.In this method,determining the optimal collaborative control parameters that support rapid drilling is crucial for improving the combined performance.This study used average drilling speed,average torque,and total specificenergy for quantitative analysis to characterize the efficiencyand economy of combined rock breaking.Given the advantage of the response surface methodology in providing high-precision predictions with limited experimental data,regression models of the average drilling speed,average torque,and total specificenergy were established.The results showed that as the laser power and irradiation time increased,the average drilling speed firstincreased rapidly and then leveled off,while the average torque decreased sharply before decelerating.The total specificenergy initially decreased and then increased,with the combined drilling outperforming conventional mechanical drilling within specific parameter ranges.As the weight on bit increased,both the average torque and total specificenergy first decreased and then increased.With rising rotating speed,the average torque exhibited a trend of initial increase,then decrease,and finalincrease,whereas the total specificenergy increased slowly at firstand then sharply.Both parameters exhibited optimal values at which the average torque and total specific energy remained at minimal levels.For granite combined drilling,the optimal performance was achieved at a laser power of 3000 W,irradiation time of 31 s,the weight on bit of 2.4 kN,and the rotating speed of 97 r/min.
基金supported in part by the National Key Research and Development Program of China(2021YFB2900501)in part by the Shaanxi Science and Technology Innovation Team(2023-CX-TD-03)+3 种基金in part by the Science and Technology Program of Shaanxi Province(2021GXLH-Z-038)in part by the Natural Science Foundation of Hunan Province(2023JJ40607 and 2023JJ50045)in part by the Scientific Research Foundation of Hunan Provincial Education Department(23B0713 and 24B0603)in part by the National Natural Science Foundation of China(62401371,62101275,and 62372070).
文摘(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.
基金funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R442)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.
文摘Hepatocellular carcinoma presents with three distinct immune phenotypes,including immune-desert,immune-excluded,and immune-inflamed,indicating various treatment responses and prognostic outcomes.The clinical application of multi-omics parameters is still restricted by the expensive and less accessible assays,although they accurately reflect immune status.A comprehensive evaluation framework based on“easy-to-obtain”multi-model clinical parameters is urgently required,incorporating clinical features to establish baseline patient profiles and disease staging;routine blood tests assessing systemic metabolic and functional status;immune cell subsets quantifying subcluster dynamics;imaging features delineating tumor morphology,spatial configuration,and perilesional anatomical relationships;immunohistochemical markers positioning qualitative and quantitative detection of tumor antigens from the cellular and molecular level.This integrated phenomic approach aims to improve prognostic stratification and clinical decision-making in hepatocellular carcinoma management conveniently and practically.
文摘The internal flow fields within a three-dimensional inward-tunning combined inlet are extremely complex,especially during the engine mode transition,where the tunnel changes may impact the flow fields significantly.To develop an efficient flow field reconstruction model for this,we present an Improved Conditional Denoising Diffusion Generative Adversarial Network(ICDDGAN),which integrates Conditional Denoising Diffusion Probabilistic Models(CDDPMs)with Style GAN,and introduce a reconstruction discrimination mechanism and dynamic loss weight learning strategy.We establish the Mach number flow field dataset by numerical simulation at various backpressures for the mode transition process from turbine mode to ejector ramjet mode at Mach number 2.5.The proposed ICDDGAN model,given only sparse parameter information,can rapidly generate high-quality Mach number flow fields without a large number of samples for training.The results show that ICDDGAN is superior to CDDGAN in terms of training convergence and stability.Moreover,the interpolation and extrapolation test results during backpressure conditions show that ICDDGAN can accurately and quickly reconstruct Mach number fields at various tunnel slice shapes,with a Structural Similarity Index Measure(SSIM)of over 0.96 and a Mean-Square Error(MSE)of 0.035%to actual flow fields,reducing time costs by 7-8 orders of magnitude compared to Computational Fluid Dynamics(CFD)calculations.This can provide an efficient means for rapid computation of complex flow fields.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12274348 and 12004335)the National Key Research and Development Program of China(Grant No.2024YFC2813800)。
文摘Presented in this study is a novel method for estimating the depth of single underwater source in shallow water,utilizing vector sensors.The approach leverages the depth distribution of the broadband Stokes parameters to estimate source depth accurately.Unlike traditional matched field processing(MFP)and matched mode processing(MMP),the proposed approach can estimate source depth directly from the data received by sensors without requiring complete environmental information.Firstly,the broadband Stokes parameters(BSP)are established using the normal mode theory.Then the nonstationary phase approximation is used to simplify the theoretical derivation,which is necessary when dealing with broadband integrals.Additionally,range terms of the BSP are eliminated by normalization.By analyzing the depth distribution of the normalized broadband Stokes parameters(NBSP),it is found that the NBSP exhibit extreme values at the source depth,which can be used for source depth estimation.So the proposed depth estimation method is based on searching the peaks of the NBSP.Simulations show that this method is effective in relatively simple shallow water environments.Finally,the effect of source range,frequency bandwidth,sound speed profile(SSP),water depth,and signal-to-noise ratio(SNR)are studied.The findings indicate that the proposed method can accurately estimate the source depth when the SNR is greater than-5 d B and does not need to consider model mismatch issues.Additionally,variations in environmental parameters have minimal impact on estimation accuracy.Compared to MFP,the proposed method requires a higher SNR,but demonstrates superior robustness against fluctuations in environmental parameters.
基金supported by the National Key R&D Program of China[grant number 2023YFC3008004]。
文摘This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.
基金supported by the National Key Research and Development Plan(Grant No.2022YFB3401901)the National Natural Science Foundation of China(Grant Nos.12192210,12192214,12072295,and 12222209)+1 种基金Independent Project of State Key Laboratory of Rail Transit Vehicle System(Grant No.2023TPL-T03)Fundamental Research Funds for the Central Universities(Grant No.2682023CG004).
文摘The S38C railway axle undergoes induction hardening,resulting in a gradient-distributed microstructure and mechanical properties.The accurate identification of gradient-distributed plastic parameters for the S38C axle remains a challenging task.To tackle this challenge,the present study proposes a novel approach for identifying the gradient-distributed plastic parameters for the S38C axle by integrating nano-indentation techniques with the machine learning method.Firstly,nano-indentation tests are conducted along the radial direction of the S38C axle to obtain the gradient-distributed load-displacement curves,nano-hardness,and elastic modulus.Subsequently,the dimensionless analysis is performed to obtain the representative stress,strain,and yield stress from load-displacement curves.These parameters are then incorporated into the machine learning method as physical information to identify the gradient-distributed plastic parameters of the S38C axle.The results indicate that the proposed method based on the physics-informed neural network and multi-fidelity neural network successfully identifies the gradient-distributed plastic parameters of the S38C axles and demonstrates superior prediction accuracy and generalization compared with the purely data-driven machine learning method.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272393 and 52130905).
文摘As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).
基金funded by the Malaysian Ministry of Higher Education through the Fundamental Research Grant Scheme(FRGS/1/2024/ICT02/UCSI/02/1).
文摘Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.
文摘BACKGROUND Sagittal spinopelvic alignment(SSA)is essential for preserving a stable and effective upright posture and locomotion.Although alterations in the SSA are recognised to induce compensatory modifications in the pelvis,hips,and knees,the inverse relationship concerning knee pathology undergoing total knee arthroplasty(TKA)has been examined by a limited number of studies,yielding inconclusive results.AIM To generate evidence of the effect of TKA on the SSA from existing literature.METHODS Databases like PubMed,EMBASE,and Scopus were used to identify articles related to the“knee spine syndrome”phenomenon using a combination of subject terms and keywords such as“spinopelvic parameters”,“sagittal spinal balance”,and“total knee arthroplasty”were used with appropriate Boolean operators.Studies measuring the SSA following TKA were included,and research was conducted as per preferred reporting items for systematic review and metaanalysis guidelines.RESULTS A total of 475 participants had undergone TKA,and six studies measuring SSA were analysed.Following TKA,pelvic tilt was the only parameter that showed significant changes,while lumbar lordosis(LL),pelvic incidence,and sacral slope were non-significant,as evident from the forest plots.CONCLUSION The body's sagittal alignment is a complex balance between pelvic,spine,and lower extremity parameters.TKA,while having the potential to correct the flexion contracture,can also correct it.Still,the primary SSA for spinal pathology,i.e.,LL,may not be corrected in patients with co-existent spinal degenerative disease.
基金supported by the National Key R&D Program of China [grant number 2023YFF0805202]the National Natural Science Foun-dation of China [grant number 42175045]the Strategic Priority Research Program of the Chinese Academy of Sciences [grant number XDB42000000]。
文摘Atlantic Meridional Overturning Circulation(AMOC)plays a central role in long-term climate variations through its heat and freshwater transports,which can collapse under a rapid increase of greenhouse gas forcing in climate models.Previous studies have suggested that the deviation of model parameters is one of the major factors in inducing inaccurate AMOC simulations.In this work,with a low-resolution earth system model,the authors try to explore whether a reasonable adjustment of the key model parameter can help to re-establish the AMOC after its collapse.Through a new optimization strategy,the extra freshwater flux(FWF)parameter is determined to be the dominant one affecting the AMOC’s variability.The traditional ensemble optimal interpolation(EnOI)data assimilation and new machine learning methods are adopted to optimize the FWF parameter in an abrupt 4×CO_(2) forcing experiment to improve the adaptability of model parameters and accelerate the recovery of AMOC.The results show that,under an abrupt 4×CO_(2) forcing in millennial simulations,the AMOC will first collapse and then re-establish by the default FWF parameter slowly.However,during the parameter adjustment process,the saltier and colder sea water over the North Atlantic region are the dominant factors in usefully improving the adaptability of the FWF parameter and accelerating the recovery of AMOC,according to their physical relationship with FWF on the interdecadal timescale.
基金supported by the National Natural Science Foundation of China under Grant No.62471381the ZTE Industry-University-Institute Cooperation Funds.
文摘In the field of antenna engineering parameter calibration for indoor communication base stations,traditional methods suffer from issues such as low efficiency,poor accuracy,and limited applicability to indoor scenarios.To address these problems,a high-precision and high-efficiency indoor base station parameter calibration method based on laser measurement is proposed.We use a high-precision laser tracker to measure and determine the coordinate system transformation relationship,and further obtain the coordinates and attitude of the base station.In addition,we propose a simple calibration method based on point cloud fitting for specific scenes.Simulation results show that using common commercial laser trackers,we can achieve a coordinate correction accuracy of 1 cm and an angle correction accuracy of 0.25°,which is sufficient to meet the needs of wireless positioning.
基金National Key R&D Program of China(No.2017YFB1304000)Fundamental Research Funds for the Central Universities,China(No.2232023G-05-1)。
文摘The high-speed winding spindle employs a flexible support system incorporating rubber O-rings.By precisely configuring the structural parameters and the number of the O-rings,the spindle can stably surpass its critical speed points and maintain operational stability across the entire working speed range.However,the support stiffness and damping of rubber O-rings exhibit significant nonlinear frequency dependence.Conventional experimental methods for deriving equivalent stiffness and damping,based on the principle of the forced non-resonance method,require fabricating custom setups for each O-ring specification and conducting vibration tests at varying frequencies,resulting in low efficiency and high costs.This study proposes a hybrid simulation-experimental method for dynamic parameter identification.Firstly,the frequency-dependent dynamic parameters of a specific O-ring support system are experimentally obtained.Subsequently,a corresponding parametric finite element model is established to simulate and solve the equivalent elastic modulus and equivalent stiffness-damping coefficient of this O-ring support system.Ultimately,after iterative simulation,the simulated and experimental results achieve a 99.7%agreement.The parametric finite element model developed herein can directly simulate and inversely estimate frequency-dependent dynamic parameters for O-rings of different specifications but identical elastic modulus.
基金The National Natural Science Foundation of China under contract No. 42274159the Project supported by Key Laboratory of Space Ocean Remote Sensing and Application,MNR under contract No.2023CFO016。
文摘The research on ocean dynamics information plays a crucial role in understanding ocean phenomena, assessing marine environmental impacts, and guiding engineering designs. The Doppler information observed by radars reflects sea surface dynamics, to which ocean waves make important contributions. Low-incidence-angle real aperture radar(RAR)demonstrates great potential for independently observing vectorial Doppler information on the ocean surface. To systematically characterize and accurately estimate the wave-induced Doppler frequency shift(WVF) from lowincidence-angle RAR, this study conducts comprehensive influencing factor analysis and establishes sea-stateparameterized WVF models. First, a simulated WVF dataset is generated under a rotating low-incidence-angle RAR.The feature parameters of WVF are then determined by analysing contributing factors including wind waves, swells,and sea state parameters. Furthermore, two WVF models(WVF_Ku P9 with 9 inputs and WVF_Ku P4 with 4 inputs) are constructed by the Transformer encoder for different application scenarios. Both models achieve high accuracy for WVF estimation with root mean square errors(RMSE) of 1.874 Hz and 2.716 Hz, respectively. The reliability and superiority of the proposed models are validated through comparisons with the Ka DOP, which is a typical geophysical model function(GMF). The findings in this paper advance the understanding of WVF characteristics and generation mechanisms. The proposed estimation models can provide reliable estimates, offering critical references for lowincidence-angle RAR applications such as ocean surface current retrieval.
文摘The current investigation focuses on intertwined relationships of ecology and aquaculture for the benefit of farmers involved in fish farming practices.The study evaluated glucosinolate reduction in black,brown,and white mustard meals as fish feed ingredients for Indian Major Carps.Fish were fed with 10%mustard meal-supplemented diets in three forms:Raw(R),Anti-nutritional Rich(AR),and Anti-nutritional Lowered(AL),alongside a control group using floating feed.The three-month indoor experiment(September-November 2023)was conducted in FRP tanks with triplicate treatments.Blood analysis revealed compromised health in AR-fed carps,with reduced hemoglobin levels in rohu,catla and mrigal and elevated total leukocyte counts indicating inflammation in all the three carps studied here.Liver function was impaired in AR-fed fish,shown by increased alanine transaminase levels,highest in rohu followed by mrigal and catla.Histopathological examination of AR-fed carps liver tissue revealed necrotic spots,deformed hepatocytes,and significant vacuolation.In contrast,AL-fed fish demonstrated improved health parameters through Complete Blood Count analysis,liver function tests,and histo-pathological observations,suggesting successful reduction of anti-nutritional factors in the processed mustard meals.In near future,replacement of unprocessed seed meal with processed seed meal will lead to economic gains in fish farming.
文摘BACKGROUND Pancreatic cystic neoplasms(PCNs)are increasingly detected due to advancements in radiographic techniques,with a prevalence of approximately 15%in the general population.These lesions range from benign to premalignant and malignant,posing a diagnostic challenge.Accurate differentiation is critical,as premalignant and malignant PCNs often require surgical intervention,while benign cysts may only need monitoring unless symptomatic.Current diagnostic methods,including cross-sectional imaging,endoscopic ultrasonography,and endoscopic ultrasonography-guided fine-needle aspiration/biopsy,are specialized,not universally available,and have variable accuracy.Clinical and laboratory parameters such as carbohydrate antigen 19-9(CA 19-9),neutrophillymphocyte ratio,platelet-lymphocyte ratio,and red cell distribution width(RDW)have been associated with malignancy risk,though only CA 19-9 is guideline-supported.AIM To assess the malignancy risk of PCNs using preoperative clinical and routine laboratory parameters.METHODS A retrospective cohort study analyzed 70 patients who underwent surgery for PCNs at Ankara Bilkent City Hospital between February 2019 and March 2023.Patients were categorized into group A(benign or low-grade dysplasia,n=40)and group B(malignancy or high-grade dysplasia,n=30)based on postoperative pathology.Preoperative demographic and laboratory parameters,including age,RDW,albumin,and CA 19-9,were compared.Univariate and multivariate logistic regression analyses identified independent predictors of malignancy.Receiver operating characteristic curve analysis evaluated predictive performance,with internal validation using bootstrapping.RESULTS Group B patients were older(69.86±9.58 years vs 52.74±16.85 years,P<0.001)and had a higher incidence of diabetes mellitus(57.1%vs 21.4%,P=0.002).RDW(16.2%vs 13.7%,P<0.001),platelet-lymphocyte ratio(178 vs 126,P=0.008),and CA 19-9(21.7 U/mL vs 9.3 U/mL,P=0.009)were significantly higher in group B,while albumin was lower(41 g/L vs 45 g/L,P=0.008).Multivariate analysis identified age[odds ratio=1.067,95%confidence interval(CI):1.014-1.122,P=0.012]and RDW(odds ratio=1.784,95%CI:1.172-2.715,P=0.007)as independent predictors.The area under the curve for age,RDW,and their combination was 0.798(95%CI:0.695-0.900),0.801(95%CI:0.692-0.911),and 0.858(95%CI:0.771-0.944),respectively,with bootstrapped validation confirming stability.Cut-off values of age≥60 years and RDW≥15.5%balanced sensitivity and specificity,increasing malignancy risk 15.3-fold and 22.6-fold,respectively.CONCLUSION Age and RDW are independent predictors of malignancy in PCNs,aiding in patient selection for advanced diagnostics and surgery.Larger,multicenter studies are needed to validate these findings.
基金Natural Science Foundation of Hunan Province,China(No.2024JJ8335)Open Topic of Hunan Geospatial Information Engineering and Technology Research Center,China(No.HNGIET2023004).
文摘The estimation of orientation parameters and correction of lens distortion are crucial problems in the field of Unmanned Aerial Vehicles(UAVs)photogrammetry.In recent years,the utilization of UAVs for aerial photogrammetry has witnessed a surge in popularity.Typically,UAVs are equipped with low-cost non-metric cameras and a Position and Orientation System(POS).Unfortunately,the Interior Orientation Parameters(IOPs)of the non-metric cameras are not fixed.Whether the lens distortions are large or small,they effect the image coordinates accordingly.Additionally,Inertial Measurement Units(IMUs)often have observation errors.To address these challenges and improve parameter estimation for UAVs Light Detection and Ranging(LiDAR)and photogrammetry,this paper analyzes the accuracy of POS observations obtained from Global Navigation Satellite System Real Time Kinematic(GNSS-RTK)and IMU data.A method that incorporates additional known conditions for parameter estimation,a series of algorithms to simultaneously solve for IOPs,Exterior Orientation Parameters(EOPs),and camera lens distortion correction parameters are proposed.Extensive experiments demonstrate that the coordinates measured by GNSS-RTK can be directly used as linear EOPs;however,angular EOP measurements from IMUs exhibit relatively large errors compared to adjustment results and require correction during the adjustment process.The IOPs of non-metric cameras vary slightly between images but need to be treated as unknown parameters in high precision applications.Furthermore,it is found that the Ebner systematic error model is sensitive to the choice of the magnification parameter of the photographic baseline length in images,it should be set as less than or equal to one third of the photographic baseline to ensure stable solutions.
基金Supported by the National Natural Science Foundation of China(Grant No.12201500)。
文摘In this paper,the authors prove that the parameterized area integralμ_(Ω,S)^(ρ)and the parameterized Littlewood-Paley g_(δ)^(*)-functionμ_(Ω,δ)^(*,ρ)are bounded on two-weight grand homogeneous variable Herz-Morrey spaces MK_(p),θ,q(·))^(α(·),λ)(ω_(1),ω_(2)),where θ>0,λ∈(2,∞),q(·)∈B(R^(n)),α(·)∈L^(∞)(R^(n)),ω_(1)∈A_(p_(ω_(1)))for p_(ω_(1))∈[1,∞]and ω_(2) is a weight.Furthermore,the authors prove that the commutators[b,μ_(Ω,S)^(ρ)]which is formed by b∈BMO(R^(n))and the μ_(Ω,S)^(ρ),and the[b,μ_(Ω,δ)^(*,ρ)]generated by b∈BMO(R^(n))and theμ_(Ω,δ)^(*,ρ)are bounded on MK_(p),θ,q(·))^(α(·),λ)(ω_(1),ω_(2)),respectively.
基金supported by the Innovation Foundation of Provincial Education Department of Gansu(2024B-005)the Gansu Province National Science Foundation(22YF7GA182)the Fundamental Research Funds for the Central Universities(No.lzujbky2022-kb01)。
文摘Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.
