In this study,the effect of hot calendering process on the microstructure and properties of poly(p-phenylene terephthalamide)(PPTA) paper-based materials was investigated.The microstructures of the fracture surface,cr...In this study,the effect of hot calendering process on the microstructure and properties of poly(p-phenylene terephthalamide)(PPTA) paper-based materials was investigated.The microstructures of the fracture surface,crystalline structure,and single fiber strength of the PPTA paperbased materials as well as the different bonding behaviors between the PPTA fibers and PPTA fibrids obtained before and after the hot calendering process were examined.The results indicated that a high linear pressure would result in a limited improvement of the strength owing to the unimproved paper structure.The optimal values of tensile index and dielectric strength of 56.6 N·m/g and 27.6 kV/mm,respectively,could only be achieved with a synergistic effects of hot calendering temperature and linear pressure(240℃ and 110 k N/m,respectively).This result suggested it was possible to achieve a significant reinforcement and improvement in the interfacial bonding of functional PPTA paper-based materials,and avoid the formation of unexpected pleats and cracks in PPTA paper-based materials during the hot calendering process.展开更多
Standardization is necessary for the early industrialization of the new materials and technology.It is achieved by having agreed practices for the measurement of properties and other characteristics.The promising use ...Standardization is necessary for the early industrialization of the new materials and technology.It is achieved by having agreed practices for the measurement of properties and other characteristics.The promising use of graphene-based materials in fields like electronics,energy,and composites has resulted in standards for their nomenclature,the measurement of key characteristics,and their specification,etc.Among these,standards for measuring the key characteristics are crucial.The critical parameters are the number of layers,the type and concentration of defects and functional groups,elemental composition,sheet resistance,and carrier mobility.Standards for characterizing these have been analyzed by the International Organization for Standardization Technical Committee in ISO/TC229 and the International Electrotechnical Commission Technical Committee in IEC/TC113.These give details of applicable or preferred samples,the fundamental principles of the techniques,specific precautions,and points for attention in the relevant standards.The pivotal role of the ISO/TC229 and IEC/TC113 standards is considered and challenges and future trends are outlined.展开更多
CO_(2) capture and utilization(CCU)technologies have been recognized as crucial strategies for mitigating global warming,reducing carbon emission,and promoting resource circularity.As such,the design and development o...CO_(2) capture and utilization(CCU)technologies have been recognized as crucial strategies for mitigating global warming,reducing carbon emission,and promoting resource circularity.As such,the design and development of related materials have attracted considerable research attention.Carbon-based materials,characterized by tunable pore structures,abundant active sites,high specific surface area,and excellent chemical stability,demonstrate significant potential for applications in CO_(2) capture and utilization.This review systematically analyzes the adsorption behaviors and performance variations of typical carbon materials,including activated carbon,porous carbon,graphene,and carbon nanotubes during CO_(2) capture processes.Concerning CO_(2) utilization,emphasis is placed on recent advances in the catalytic applications of carbon-based materials in key reactions such as methanation,reverse water-gas shift,dry reforming of methane,and alcohol synthesis.Moreover,the benefits and drawbacks of carbon materials in terms of CO_(2) adsorption capacity,catalytic activity,and stability are thoroughly evaluated,and their potential applications in integrated CO_(2) capture and utilization technologies are discussed.Finally,key strategies for enhancing the performance of carbonaceous materials through structural modulation and surface modification are elucidated.This review aims to provide theoretical guidance for the future development and large-scale implementation of carbon-based materials in CCU technologies.展开更多
Moisture electricity generation(MEG)has emerged as a sustainable and versatile energy-harvesting technology capable of converting ubiquitous environmental moisture into electrical energy,which holds great promise for ...Moisture electricity generation(MEG)has emerged as a sustainable and versatile energy-harvesting technology capable of converting ubiquitous environmental moisture into electrical energy,which holds great promise for renewable energy and constructing self-powered electronics.In this review,we begin by outlining the fundamental mechanisms—ion diffusion,electric double layer formation,and streaming potential—that govern charge transport for MEG in moist environments.A comprehensive survey of material innovations follows,highlighting breakthroughs in carbon-based materials,conductive polymers,hydrogels,and bio-inspired systems that enhance MEG performance,scalability,and biocompatibility.We then explore a range of device architectures,from planar and layered systems to flexible,miniaturized,and textile-integrated designs,engineered for both energy conversion and sensor integration.Key challenges are analyzed,along with strategies for overcoming them.We conclude with a forward-looking perspective on future directions,including hybrid energy systems,AI-assisted material design,and real-world deployment.This review presents a timely and comprehensive overview of MEG technologies and their trajectory toward practical and sustainable energy solutions.展开更多
The capture of atmospheric carbon dioxide by adsorbents is an important strategy to deal with the greenhouse effect.Compared with traditional CO_(2) adsorption materials like activated carbon,silica gel,and zeolite mo...The capture of atmospheric carbon dioxide by adsorbents is an important strategy to deal with the greenhouse effect.Compared with traditional CO_(2) adsorption materials like activated carbon,silica gel,and zeolite molecular sieves,covalent organic frameworks(COFs)have excellent thermal and chemical stabilities and can be produced in many different forms.Using their different possible construction units,ordered structures for specific applications can be produced,giving them broad prospects in fields such as gas storage.This review analyzes the different types of COFs that have been synthesized and their different methods of CO_(2) capture.It then discusses different ways to increase CO_(2) adsorption by changing the internal structure of COFs and modifying their surfaces.The limitations of COF-derived carbon materials in CO_(2) capture are reviewed and,finally,the key role of machine learning and computational simulation in improving CO_(2) adsorption is mentioned,and the current status and future possible uses of COFs are summarized.展开更多
Investments in eco-friendly,recyclable material solutions and innovation in bio-based nonwovens are increasingly shaping the next generation of automotive interiors.The development of nonwoven materials and associated...Investments in eco-friendly,recyclable material solutions and innovation in bio-based nonwovens are increasingly shaping the next generation of automotive interiors.The development of nonwoven materials and associated technologies is likely to lead to even wider adoption in the automotive industry,driven by rising global vehicle production,particularly in the growing electric vehicle(EV)segment,and an intensified focus on sustainable solutions.展开更多
Photocatalytic nitrogen fixation (PNF) is a promising alternative to the Haber-Bosch process.It achieves green ammonia production by utilizing solar energy for nitrogen fixation under mild conditions.While nanoscale p...Photocatalytic nitrogen fixation (PNF) is a promising alternative to the Haber-Bosch process.It achieves green ammonia production by utilizing solar energy for nitrogen fixation under mild conditions.While nanoscale photocatalysts offer enhanced performance due to their high surface area and abundant active sites,their small size makes them difficult to recover and prone to agglomeration.These bottlenecks severely limit industrial application.A promising solution is to immobilize the catalysts onto support surfaces.This paper provides a systematic review of recent advances in the design of immobilized photocatalysts for ammonia synthesis.It begins by outlining the key benefits of immobilization strategies,particularly in improving catalyst stability,recyclability,and overall photocatalytic performance.The working mechanisms and features of various immobilization techniques are then categorized and explained,covering physical adsorption/deposition,chemical bonding,in situ growth,and hybrid physico-chemical methods.Supported materials and common substrate types are also summarized.Furthermore,the widely used configurations of photoreactors suitable for immobilized systems are introduced.Finally,the review identifies current research limitations and challenges,and offers perspectives on future developments in the field of immobilized photocatalysis.展开更多
Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable pat...Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.展开更多
Intelligent refractory materials represent a new generation of high-temperature functional materials that significantly enhance the service performance of traditional refractories in extreme environments through integ...Intelligent refractory materials represent a new generation of high-temperature functional materials that significantly enhance the service performance of traditional refractories in extreme environments through integrated sensing,response,and adaptive mechanisms.A comprehensive overview of intelligent refractory materials was provided,focusing on their classification,preparation techniques,and industrial applications.Firstly,the categories and design principles of intelligent refractory materials are introduced,including self-healing,self-regulating,and self-diagnosing types,which enhance durability and performance under extreme conditions.Subsequently,advanced preparation technologies are discussed,such as 3D printing for complex geometries,nanocomposite engineering for improved mechanical and thermal properties,gradient design for optimized thermal stress resistance and information technology including machine learning,health monitoring,digital twin.Finally,the industrial applications of these materials are highlighted,particularly in steel metallurgy,building materials industry,and energy.It aims to bridge the gap between research advancements and practical implementation,offering insights into future trends in intelligent refractory material development.展开更多
Biomedical applications necessitate natural or synthetic biomaterials that can maintain,improve,or even replace damaged tissue or a biological function,facilitating healing for people who have suffered from an injury ...Biomedical applications necessitate natural or synthetic biomaterials that can maintain,improve,or even replace damaged tissue or a biological function,facilitating healing for people who have suffered from an injury or disease.Metallic biomaterials show superior mechanical properties with greater service life than other materials.Biodegradable materials can avoid the inevitable second operation of removing the implant in the case of temporary implantation,reducing the risk of infections,medical complications,healing time,and cost.Magnesium(Mg),zinc(Zn),iron(Fe),and their alloys are potential biodegradable metallic materials.The characteristics of biodegradable metallic materials are variable and depend on many factors,such as alloying elements,microstructure,existing phases,and thermomechanical treatment.The current review emphasizes the impact of alloying element addition on the characteristics of metallic biodegradable materials,with particular attention to the relationships between alloying elements,microstructure,mechanical performance,corrosion,and biocompatibility.Mg alloys show good mechanical and corrosion properties with excellent biocompatibility.Using biocompatible alloying elements can improve Mg alloy mechanical and corrosion properties without af-fecting their biocompatibility.However,critical limitations are still maintained,like rapid degradation and gas bubble formation.Zn alloys could overcome the limitations of Mg alloys with appropriate degradation rates,ease of casting and processing,and good biocompatibility.Alloying,particularly with Mg,Li,and Cu,combined with thermomechanical treatment,can significantly affect the microstructure and mechanical performance of Zn alloys and overcome the problem of unsuitable mechanical properties.Fe alloys have excellent mechanical performance,formability,and biocompatibility with a low degradation rate.Applying surface treatment,using novel structures,alloying with the appropriate amount of alloying elements,and using advanced manufacturing techniques may present a way to solve the problems associated with biodegradable metallic materials,which could open new horizons and increase their applicability in biomedical applications.展开更多
Though the formation of polysulfide is desirable,as it contributes to the capacity build-up,it must not leak into the electrolyte.The loss of polysulfide causes capacity fade,a change in the local chemistry of the ele...Though the formation of polysulfide is desirable,as it contributes to the capacity build-up,it must not leak into the electrolyte.The loss of polysulfide causes capacity fade,a change in the local chemistry of the electrolyte,and anode poisoning.Constant efforts are in progress to find suitable polysulfide-absorbing materials;however,the magical polysulfide absorber is yet to be discovered or developed.Experimental methods alone often fall short in accelerating the investigations may be due to the complex Nature of the testing.This review focuses on the importance of computational methods,particularly density functional theory(DFT),in screening suitable polysulfide absorbers.It highlights the critical role of anchoring materials in improving Na-S battery performance,including pristine and doped graphene,metal–organic frameworks,carbon Nanofibers,vanadium disulfide,MXenes,and metal sulfides.By examining adsorption energies,charge transfer mechanisms,and catalytic properties,this review provides insights into the design of advanced materials that can effectively immobilize polysulfides and enhance battery stability.The review aims to guide future research efforts toward the development of high-performance RT Na-S batteries through a comprehensive understanding of the polysulfide-absorbing materials.展开更多
To solve the problem of abnormal abrasion of Cu-Based Friction Materials(CBFMs),Bionic Non-Smooth Surface(BNS)on friction surface of CBFMs was constructed based on bionic principles,and the optimal bionic prototype wa...To solve the problem of abnormal abrasion of Cu-Based Friction Materials(CBFMs),Bionic Non-Smooth Surface(BNS)on friction surface of CBFMs was constructed based on bionic principles,and the optimal bionic prototype was selected by Finite Element Method(FEM).In addition,the bionic parameters were optimized by Response Surface Method(RSM).Samples holding BNS were prepared by Laser Processing,tribological properties were tested by a Friction and Wear Tester and worn surface morphology was characterized by a Scanning Electron Microscope(SEM).The results showed that BNS on friction surface could regulate the stress distribution and alleviate the peak stress.Among all samples,the coupled texture of pit-hexagonal got the minimum peak stress.During braking,bionic texture could also collect wear debris or change the motion forms from sliding to rotation,which can reduce abnormal abrasion.The wear rate was reduced by 19.31%.The results in this paper can provide a new idea for enhancing the tribological properties of CBFMs,and can also lay the foundation for further research of bionic tribology.展开更多
Cement stands as a dominant contributor to global energy consumption and carbon emissions in the construction industry.With the upgrading of infrastructure and the improvement of building standards,traditional cement ...Cement stands as a dominant contributor to global energy consumption and carbon emissions in the construction industry.With the upgrading of infrastructure and the improvement of building standards,traditional cement fails to reconcile ecological responsibility with advanced functional performance.By incorporating tailored fillers into cement matrices,the resulting composites achieve enhanced thermoelectric(TE)conversion capabilities.These materials can harness solar radiation from building envelopes and recover waste heat from indoor thermal gradients,facilitating bidirectional energy conversion.This review offers a comprehensive and timely overview of cementbased thermoelectric materials(CTEMs),integrating material design,device fabrication,and diverse applications into a holistic perspective.It summarizes recent advancements in TE performance enhancement,encompassing fillers optimization and matrices innovation.Additionally,the review consolidates fabrication strategies and performance evaluations of cement-based thermoelectric devices(CTEDs),providing detailed discussions on their roles in monitoring and protection,energy harvesting,and smart building.We also address sustainability,durability,and lifecycle considerations of CTEMs,which are essential for real-world deployment.Finally,we outline future research directions in materials design,device engineering,and scalable manufacturing to foster the practical application of CTEMs in sustainable and intelligent infrastructure.展开更多
A soft X-ray energy materials research beamline(BL20U2),a branch of energy materials beamline(E-line),has been constructed in the Shanghai Synchrotron Radiation Facility(SSRF)Phase-Ⅱ project.It is now operational for...A soft X-ray energy materials research beamline(BL20U2),a branch of energy materials beamline(E-line),has been constructed in the Shanghai Synchrotron Radiation Facility(SSRF)Phase-Ⅱ project.It is now operational for soft X-ray resonant emission spectroscopy(RXES)and soft X-ray resonant elastic scattering(REXS)investigations.Optical optimization was implemented for high performance,e.g.,photon flux,energy-resolving power,and focus spot size.RXES experiments show that the energy range extends from 150 to 1500 eV.The elastic peak measured near titanium absorption edge(@445 eV)indicates an energy resolution of the RXES spectrometer of 65 meV.The measured photon flux is 3×10^(12)photons/s at 244 eV at the RXES sample position for an SSRF electron energy of 3.5 GeV and a projected ring current as 300 mA.The spot size at the RXES sample position is 23μm in the horizontal direction and 7.9μm in the vertical direction,respectively.Moreover,the angular resolution of elastic REXS scatterometer reaches 0.005°through measurement of X-ray reflection from the single-crystal silicon wafers.A sample of the REXS scatterometer is vibrationally decoupled from its chamber and cooled using copper braids connected from an open cycle liquid helium cryo reservoir,whereas the minimum sample temperature is below 15 K.展开更多
The demand for sustainable energy storage has accelerated the development of cellulose-based materials(CBMs)for flexible supercapacitors(FSCs).However,widespread commercialization of FSCs remains challenged by their l...The demand for sustainable energy storage has accelerated the development of cellulose-based materials(CBMs)for flexible supercapacitors(FSCs).However,widespread commercialization of FSCs remains challenged by their low gravimetric energy density(approximately 35 Wh kg^(-1)),far below lithium-ion batteries(exceeding 200 Wh kg^(-1)),and a limited operational temperature range(from-20℃ to 60℃),restricting their use in extreme environments.To date,no comprehensive review has elucidated the crucial role of the chemistry and structure-property relationships of CBMs in advancing FSC technology.This review fills this gap by examining the chemical attributes and versatility of cellulose and its derivatives,including their physicochemical characteris-tics,assembly methodologies,and functional modifications such as oxidation,esterification,etherification,grafting polymerization,nucleophilic substitution,and crosslinking reactions.We further provide an overview of the chemistry and structure-function correlations of various cellulose forms used in advanced electrodes,solid electrolytes,separators,binders,current collectors,and substrate/encapsulation materials,alongside relevant microelectrode processing technologies.Given that large-scale application of FSCs is still in its early stages,we offer insightful design principles for guiding future development of cellulose-based FSCs.By proposing a“chemistry-performance-sustainability”design framework,this review not only addresses existing limitations but also outlines a roadmap for next-generation eco-friendly FSCs.展开更多
Lattice materials have demonstrated promising potential in engineering applications owing to their exceptional lightweight,high specific strength,and tunable mechanical properties.However,the traditional homogenizatio...Lattice materials have demonstrated promising potential in engineering applications owing to their exceptional lightweight,high specific strength,and tunable mechanical properties.However,the traditional homogenization methods based on the classical elasticity theory struggle to accurately describe the non-classical mechanical behaviors of lattice materials,especially when dealing with complex unit-cell geometries featured by non-symmetric configurations or non-single central node connections.In response to this limitation,this study establishes a generalized homogenization model based on the micropolar theory framework,employing Hill's boundary conditions to precisely predict the equivalent moduli of complex lattice materials.By introducing the independent rotational degree of freedom(DOF)characteristic of the micropolar theory,the proposed model successfully overcomes the limitation of conventional methods in accurately describing the asymmetric deformation and scale effects.We initially calculate the constitutive relations of two-dimensional(2D)cross-shaped multi-node chiral lattices and subsequently extend the method to three-dimensional(3D)lattices,successfully predicting the mechanical properties of both traditional and eccentric body-centered cubic(BCC)lattices.The theoretical model is validated through the finite element numerical verification which shows excellent consistency with the theoretical predictions.A further parametric study investigates the influence of geometric parameters,revealing the underlying size-effect mechanism.This paper provides a reliable theoretical tool for the design and property optimization of complex lattice materials.展开更多
The mechanical performance of exceedingly soft materials such as Ag is significantly influenced by various working conditions.Therefore,this study systematically investigates the effects of crack geometry,substrate cr...The mechanical performance of exceedingly soft materials such as Ag is significantly influenced by various working conditions.Therefore,this study systematically investigates the effects of crack geometry,substrate crystal orientation,and indenter shape on crack propagation.The mechanical response of Ag is analyzed using the quasi-continuum(QC)method.A pre-crack with a predefined depth and angle was introduced to initiate fracture behavior.The results show that when the pre-crack height is 50 A,the crack propagates rapidly as the imprint depth increases from0 to 7 A,grows steadily up to 15 A,and then accelerates sharply between 15 and 20 A.For other pre-crack heights,crack propagation occurs at a relatively faster rate.Substrates with[100],[010],and[001]crystal orientations promote crack extension,while the onset of plastic deformation(referred to as the yield point in this study)and the fracture strength both increase with increasing pre-crack height.The yield point,fracture strength,and stress intensity factors are highly sensitive to the pre-crack height.When the pre-crack angle is 90○,the fracture strength reaches its maximum of 0.2%higher than that of the uncracked sample-whereas at 0○,it reaches its minimum,still 53.8%higher than that of the uncracked sample.The sample model is conducted using AutoCAD software.The optimized quasicontinuum(QC)method is used to investigate the effects of different crack geometries,substrate crystal orientations,and indenter shapes on the crack extension of Ag material.Baskes and Dow(FBD)potential is borrowed to describe the interaction forces between Ag-Ag,Ni-Ag,and Ni-Ni.展开更多
As electronic technology continues to evolve towards miniaturization and integration,the demand for micro-refrigeration technology in microelectronic systems is increasing.Ferroelectric(FE)refrigeration technology bas...As electronic technology continues to evolve towards miniaturization and integration,the demand for micro-refrigeration technology in microelectronic systems is increasing.Ferroelectric(FE)refrigeration technology based on the electrocaloric effect(ECE)has emerged as a highly promising candidate in this field,due to its advantages of high energy efficiency,simple structure,easy miniaturization,low cost,and environmental friendliness.The EC performance of FE materials essentially depends on the phase transition features under the coupled electric and thermal fields,making the E–T phase diagram a core tool for decoding the underlying mechanism of ECE.This paper reviews the development of EC materials,focusing on the comprehensive study of E–T phase diagrams.By correlating the microscopic phase structure of FE materials with the macroscopic physical properties,it clarifies the manipulation mechanism for enhanced ECE performance,providing theoretical support for the targeted design of high-performance EC materials.In the future,the introduction of data-driven methods is expected to enable the high-throughput construction of FE phase diagrams,thereby accelerating the optimization of high-performance EC materials and promoting the practical application of FE refrigeration technology.展开更多
Granular materials exhibit complex macroscopic mechanical behaviors closely related to their microscalemicrostructural features.Traditional macroscopic phenomenological elasto-plastic models,however,usually have compl...Granular materials exhibit complex macroscopic mechanical behaviors closely related to their microscalemicrostructural features.Traditional macroscopic phenomenological elasto-plastic models,however,usually have complex formulations and lack explicit relations to these microstructural features.To avoid these limitations,this study proposes a micromechanics-based softening hyperelastic model for granular materials,integrating softening hyperelasticity withmicrostructural insights to capture strain softening,critical state,and strain localization behaviors.The model has two key advantages:(1)a clear conceptualization,straightforward formulation,and ease of numerical implementation(via Abaqus UMAT subroutine in this study);(2)explicit incorporation of micro-scale features(e.g.,contact stiffness,particle size,porosity)to reveal their influences on macroscopic responses.An isotropic directional distribution density of contacts and three specific microstructures are considered,and their softening hyperelastic constitutive modulus tensors are explicitly derived.By introducing a softening factor and critical failure energy density,the model can describe geomaterial behaviors,simulating residual strength,X-shaped shear bands,and strain localization evolution.Numerical validations in comparison with themacro-scale hyperelastic model,Abaqus Drucker-Prager model,and the experiment confirm its accuracy.Parametric studies reveal critical dependencies:a normal to tangential contact stiffness ratio of 2-8(depending on stiffness magnitude),an internal length of 2-4 mm to ensure shear band formation,and a critical failure energy density(≤10 kJ/m^(3))to trigger strain softening and localization.Influences of the specific microstructures on strain localization and softening are investigated.The model also shows mesh independence due to the introduction of an internal length.The model’s applicability is further demonstrated by slope stability analysis,capturing slip surface evolution,and load-displacement characteristics.This study develops a robust microstructure-aware hyperelastic framework to describe the mechanical behaviors of granular materials,providing multiscale insights for geotechnical engineering applications.展开更多
基金the financial support to this research from the open fund of state key laboratory for modification of chemical fibers and polymer materials (LK1601)projects of education department of Shaanxi provincial government (15JF012)National Natural Science Foundation of China (51402180)
文摘In this study,the effect of hot calendering process on the microstructure and properties of poly(p-phenylene terephthalamide)(PPTA) paper-based materials was investigated.The microstructures of the fracture surface,crystalline structure,and single fiber strength of the PPTA paperbased materials as well as the different bonding behaviors between the PPTA fibers and PPTA fibrids obtained before and after the hot calendering process were examined.The results indicated that a high linear pressure would result in a limited improvement of the strength owing to the unimproved paper structure.The optimal values of tensile index and dielectric strength of 56.6 N·m/g and 27.6 kV/mm,respectively,could only be achieved with a synergistic effects of hot calendering temperature and linear pressure(240℃ and 110 k N/m,respectively).This result suggested it was possible to achieve a significant reinforcement and improvement in the interfacial bonding of functional PPTA paper-based materials,and avoid the formation of unexpected pleats and cracks in PPTA paper-based materials during the hot calendering process.
文摘Standardization is necessary for the early industrialization of the new materials and technology.It is achieved by having agreed practices for the measurement of properties and other characteristics.The promising use of graphene-based materials in fields like electronics,energy,and composites has resulted in standards for their nomenclature,the measurement of key characteristics,and their specification,etc.Among these,standards for measuring the key characteristics are crucial.The critical parameters are the number of layers,the type and concentration of defects and functional groups,elemental composition,sheet resistance,and carrier mobility.Standards for characterizing these have been analyzed by the International Organization for Standardization Technical Committee in ISO/TC229 and the International Electrotechnical Commission Technical Committee in IEC/TC113.These give details of applicable or preferred samples,the fundamental principles of the techniques,specific precautions,and points for attention in the relevant standards.The pivotal role of the ISO/TC229 and IEC/TC113 standards is considered and challenges and future trends are outlined.
基金Supported by National Key R&D Program of China(2025YFE0109700)the National Natural Science Foundation of China(52106150)。
文摘CO_(2) capture and utilization(CCU)technologies have been recognized as crucial strategies for mitigating global warming,reducing carbon emission,and promoting resource circularity.As such,the design and development of related materials have attracted considerable research attention.Carbon-based materials,characterized by tunable pore structures,abundant active sites,high specific surface area,and excellent chemical stability,demonstrate significant potential for applications in CO_(2) capture and utilization.This review systematically analyzes the adsorption behaviors and performance variations of typical carbon materials,including activated carbon,porous carbon,graphene,and carbon nanotubes during CO_(2) capture processes.Concerning CO_(2) utilization,emphasis is placed on recent advances in the catalytic applications of carbon-based materials in key reactions such as methanation,reverse water-gas shift,dry reforming of methane,and alcohol synthesis.Moreover,the benefits and drawbacks of carbon materials in terms of CO_(2) adsorption capacity,catalytic activity,and stability are thoroughly evaluated,and their potential applications in integrated CO_(2) capture and utilization technologies are discussed.Finally,key strategies for enhancing the performance of carbonaceous materials through structural modulation and surface modification are elucidated.This review aims to provide theoretical guidance for the future development and large-scale implementation of carbon-based materials in CCU technologies.
基金supported by the National Natural Science Foundation of China(52305388,BE0200030)Shanghai Pujiang Program(22PJ1407600)+1 种基金SJTU Explore X programShanghai Jiao Tong University Initiative Scientific Research Program(WH220402021)。
文摘Moisture electricity generation(MEG)has emerged as a sustainable and versatile energy-harvesting technology capable of converting ubiquitous environmental moisture into electrical energy,which holds great promise for renewable energy and constructing self-powered electronics.In this review,we begin by outlining the fundamental mechanisms—ion diffusion,electric double layer formation,and streaming potential—that govern charge transport for MEG in moist environments.A comprehensive survey of material innovations follows,highlighting breakthroughs in carbon-based materials,conductive polymers,hydrogels,and bio-inspired systems that enhance MEG performance,scalability,and biocompatibility.We then explore a range of device architectures,from planar and layered systems to flexible,miniaturized,and textile-integrated designs,engineered for both energy conversion and sensor integration.Key challenges are analyzed,along with strategies for overcoming them.We conclude with a forward-looking perspective on future directions,including hybrid energy systems,AI-assisted material design,and real-world deployment.This review presents a timely and comprehensive overview of MEG technologies and their trajectory toward practical and sustainable energy solutions.
文摘The capture of atmospheric carbon dioxide by adsorbents is an important strategy to deal with the greenhouse effect.Compared with traditional CO_(2) adsorption materials like activated carbon,silica gel,and zeolite molecular sieves,covalent organic frameworks(COFs)have excellent thermal and chemical stabilities and can be produced in many different forms.Using their different possible construction units,ordered structures for specific applications can be produced,giving them broad prospects in fields such as gas storage.This review analyzes the different types of COFs that have been synthesized and their different methods of CO_(2) capture.It then discusses different ways to increase CO_(2) adsorption by changing the internal structure of COFs and modifying their surfaces.The limitations of COF-derived carbon materials in CO_(2) capture are reviewed and,finally,the key role of machine learning and computational simulation in improving CO_(2) adsorption is mentioned,and the current status and future possible uses of COFs are summarized.
文摘Investments in eco-friendly,recyclable material solutions and innovation in bio-based nonwovens are increasingly shaping the next generation of automotive interiors.The development of nonwoven materials and associated technologies is likely to lead to even wider adoption in the automotive industry,driven by rising global vehicle production,particularly in the growing electric vehicle(EV)segment,and an intensified focus on sustainable solutions.
基金support for carrying out this work was provided by the Doctoral Research Foundation of Weifang University(2024BS20)Science and Technology Development Plan Foundation of Weifang(2024GX017).
文摘Photocatalytic nitrogen fixation (PNF) is a promising alternative to the Haber-Bosch process.It achieves green ammonia production by utilizing solar energy for nitrogen fixation under mild conditions.While nanoscale photocatalysts offer enhanced performance due to their high surface area and abundant active sites,their small size makes them difficult to recover and prone to agglomeration.These bottlenecks severely limit industrial application.A promising solution is to immobilize the catalysts onto support surfaces.This paper provides a systematic review of recent advances in the design of immobilized photocatalysts for ammonia synthesis.It begins by outlining the key benefits of immobilization strategies,particularly in improving catalyst stability,recyclability,and overall photocatalytic performance.The working mechanisms and features of various immobilization techniques are then categorized and explained,covering physical adsorption/deposition,chemical bonding,in situ growth,and hybrid physico-chemical methods.Supported materials and common substrate types are also summarized.Furthermore,the widely used configurations of photoreactors suitable for immobilized systems are introduced.Finally,the review identifies current research limitations and challenges,and offers perspectives on future developments in the field of immobilized photocatalysis.
基金supported by the National Key Research and Development Program of ChinaNational Natural Science Foundation of China(NSFC)Jilin Province Science and Technology Development Plan Project under Grants 2020YFA0715000,62075081,and 20220402011GH。
文摘Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.
基金supported by the Natural Science Foundation of Shaanxi Province(No.2023-JC-QN-0615)the National Natural Science Foundation of China(Nos.52272027 and 52372034).
文摘Intelligent refractory materials represent a new generation of high-temperature functional materials that significantly enhance the service performance of traditional refractories in extreme environments through integrated sensing,response,and adaptive mechanisms.A comprehensive overview of intelligent refractory materials was provided,focusing on their classification,preparation techniques,and industrial applications.Firstly,the categories and design principles of intelligent refractory materials are introduced,including self-healing,self-regulating,and self-diagnosing types,which enhance durability and performance under extreme conditions.Subsequently,advanced preparation technologies are discussed,such as 3D printing for complex geometries,nanocomposite engineering for improved mechanical and thermal properties,gradient design for optimized thermal stress resistance and information technology including machine learning,health monitoring,digital twin.Finally,the industrial applications of these materials are highlighted,particularly in steel metallurgy,building materials industry,and energy.It aims to bridge the gap between research advancements and practical implementation,offering insights into future trends in intelligent refractory material development.
文摘Biomedical applications necessitate natural or synthetic biomaterials that can maintain,improve,or even replace damaged tissue or a biological function,facilitating healing for people who have suffered from an injury or disease.Metallic biomaterials show superior mechanical properties with greater service life than other materials.Biodegradable materials can avoid the inevitable second operation of removing the implant in the case of temporary implantation,reducing the risk of infections,medical complications,healing time,and cost.Magnesium(Mg),zinc(Zn),iron(Fe),and their alloys are potential biodegradable metallic materials.The characteristics of biodegradable metallic materials are variable and depend on many factors,such as alloying elements,microstructure,existing phases,and thermomechanical treatment.The current review emphasizes the impact of alloying element addition on the characteristics of metallic biodegradable materials,with particular attention to the relationships between alloying elements,microstructure,mechanical performance,corrosion,and biocompatibility.Mg alloys show good mechanical and corrosion properties with excellent biocompatibility.Using biocompatible alloying elements can improve Mg alloy mechanical and corrosion properties without af-fecting their biocompatibility.However,critical limitations are still maintained,like rapid degradation and gas bubble formation.Zn alloys could overcome the limitations of Mg alloys with appropriate degradation rates,ease of casting and processing,and good biocompatibility.Alloying,particularly with Mg,Li,and Cu,combined with thermomechanical treatment,can significantly affect the microstructure and mechanical performance of Zn alloys and overcome the problem of unsuitable mechanical properties.Fe alloys have excellent mechanical performance,formability,and biocompatibility with a low degradation rate.Applying surface treatment,using novel structures,alloying with the appropriate amount of alloying elements,and using advanced manufacturing techniques may present a way to solve the problems associated with biodegradable metallic materials,which could open new horizons and increase their applicability in biomedical applications.
基金supported by the Indian Institute of Technology Delhi (IIT Delhi)
文摘Though the formation of polysulfide is desirable,as it contributes to the capacity build-up,it must not leak into the electrolyte.The loss of polysulfide causes capacity fade,a change in the local chemistry of the electrolyte,and anode poisoning.Constant efforts are in progress to find suitable polysulfide-absorbing materials;however,the magical polysulfide absorber is yet to be discovered or developed.Experimental methods alone often fall short in accelerating the investigations may be due to the complex Nature of the testing.This review focuses on the importance of computational methods,particularly density functional theory(DFT),in screening suitable polysulfide absorbers.It highlights the critical role of anchoring materials in improving Na-S battery performance,including pristine and doped graphene,metal–organic frameworks,carbon Nanofibers,vanadium disulfide,MXenes,and metal sulfides.By examining adsorption energies,charge transfer mechanisms,and catalytic properties,this review provides insights into the design of advanced materials that can effectively immobilize polysulfides and enhance battery stability.The review aims to guide future research efforts toward the development of high-performance RT Na-S batteries through a comprehensive understanding of the polysulfide-absorbing materials.
基金Wuxi University Research Start-up Fund for Introduced Talents(Grant No:2024r031)Technology Development Contract(Contract Registration Number:2024320205000963)+1 种基金National Natural Science Foundation of China(Grant No.52275288)Ningbo Key Research and Development Plan(Grant No.2023Z022).
文摘To solve the problem of abnormal abrasion of Cu-Based Friction Materials(CBFMs),Bionic Non-Smooth Surface(BNS)on friction surface of CBFMs was constructed based on bionic principles,and the optimal bionic prototype was selected by Finite Element Method(FEM).In addition,the bionic parameters were optimized by Response Surface Method(RSM).Samples holding BNS were prepared by Laser Processing,tribological properties were tested by a Friction and Wear Tester and worn surface morphology was characterized by a Scanning Electron Microscope(SEM).The results showed that BNS on friction surface could regulate the stress distribution and alleviate the peak stress.Among all samples,the coupled texture of pit-hexagonal got the minimum peak stress.During braking,bionic texture could also collect wear debris or change the motion forms from sliding to rotation,which can reduce abnormal abrasion.The wear rate was reduced by 19.31%.The results in this paper can provide a new idea for enhancing the tribological properties of CBFMs,and can also lay the foundation for further research of bionic tribology.
基金supported by the National Natural Science Foundation of China(No.52242305).
文摘Cement stands as a dominant contributor to global energy consumption and carbon emissions in the construction industry.With the upgrading of infrastructure and the improvement of building standards,traditional cement fails to reconcile ecological responsibility with advanced functional performance.By incorporating tailored fillers into cement matrices,the resulting composites achieve enhanced thermoelectric(TE)conversion capabilities.These materials can harness solar radiation from building envelopes and recover waste heat from indoor thermal gradients,facilitating bidirectional energy conversion.This review offers a comprehensive and timely overview of cementbased thermoelectric materials(CTEMs),integrating material design,device fabrication,and diverse applications into a holistic perspective.It summarizes recent advancements in TE performance enhancement,encompassing fillers optimization and matrices innovation.Additionally,the review consolidates fabrication strategies and performance evaluations of cement-based thermoelectric devices(CTEDs),providing detailed discussions on their roles in monitoring and protection,energy harvesting,and smart building.We also address sustainability,durability,and lifecycle considerations of CTEMs,which are essential for real-world deployment.Finally,we outline future research directions in materials design,device engineering,and scalable manufacturing to foster the practical application of CTEMs in sustainable and intelligent infrastructure.
文摘A soft X-ray energy materials research beamline(BL20U2),a branch of energy materials beamline(E-line),has been constructed in the Shanghai Synchrotron Radiation Facility(SSRF)Phase-Ⅱ project.It is now operational for soft X-ray resonant emission spectroscopy(RXES)and soft X-ray resonant elastic scattering(REXS)investigations.Optical optimization was implemented for high performance,e.g.,photon flux,energy-resolving power,and focus spot size.RXES experiments show that the energy range extends from 150 to 1500 eV.The elastic peak measured near titanium absorption edge(@445 eV)indicates an energy resolution of the RXES spectrometer of 65 meV.The measured photon flux is 3×10^(12)photons/s at 244 eV at the RXES sample position for an SSRF electron energy of 3.5 GeV and a projected ring current as 300 mA.The spot size at the RXES sample position is 23μm in the horizontal direction and 7.9μm in the vertical direction,respectively.Moreover,the angular resolution of elastic REXS scatterometer reaches 0.005°through measurement of X-ray reflection from the single-crystal silicon wafers.A sample of the REXS scatterometer is vibrationally decoupled from its chamber and cooled using copper braids connected from an open cycle liquid helium cryo reservoir,whereas the minimum sample temperature is below 15 K.
基金support from the National Key R&D Program of China(Grant No.2023YFB4005204)the National Natural Science Foundation of China(Grant No.22125903,U24A20553,22579025,52502038)+2 种基金Fundamental Research Funds for the Central Universities(No.2572023CT06)Key Joint Project of the Natural Science Foundation of Heilongjiang Province,China(No.ZL2024E007)the Innovation Foundation for Doctoral Program of Forestry Engineering of Northeast Forestry University(No.LYGC202220).
文摘The demand for sustainable energy storage has accelerated the development of cellulose-based materials(CBMs)for flexible supercapacitors(FSCs).However,widespread commercialization of FSCs remains challenged by their low gravimetric energy density(approximately 35 Wh kg^(-1)),far below lithium-ion batteries(exceeding 200 Wh kg^(-1)),and a limited operational temperature range(from-20℃ to 60℃),restricting their use in extreme environments.To date,no comprehensive review has elucidated the crucial role of the chemistry and structure-property relationships of CBMs in advancing FSC technology.This review fills this gap by examining the chemical attributes and versatility of cellulose and its derivatives,including their physicochemical characteris-tics,assembly methodologies,and functional modifications such as oxidation,esterification,etherification,grafting polymerization,nucleophilic substitution,and crosslinking reactions.We further provide an overview of the chemistry and structure-function correlations of various cellulose forms used in advanced electrodes,solid electrolytes,separators,binders,current collectors,and substrate/encapsulation materials,alongside relevant microelectrode processing technologies.Given that large-scale application of FSCs is still in its early stages,we offer insightful design principles for guiding future development of cellulose-based FSCs.By proposing a“chemistry-performance-sustainability”design framework,this review not only addresses existing limitations but also outlines a roadmap for next-generation eco-friendly FSCs.
基金Project supported by the National Natural Science Foundation of China(No.12472077)the supports from Shanghai Gaofeng Project for University Academic Program Development,Fundamental Research Funds for the Central Universities(No.22120240353).
文摘Lattice materials have demonstrated promising potential in engineering applications owing to their exceptional lightweight,high specific strength,and tunable mechanical properties.However,the traditional homogenization methods based on the classical elasticity theory struggle to accurately describe the non-classical mechanical behaviors of lattice materials,especially when dealing with complex unit-cell geometries featured by non-symmetric configurations or non-single central node connections.In response to this limitation,this study establishes a generalized homogenization model based on the micropolar theory framework,employing Hill's boundary conditions to precisely predict the equivalent moduli of complex lattice materials.By introducing the independent rotational degree of freedom(DOF)characteristic of the micropolar theory,the proposed model successfully overcomes the limitation of conventional methods in accurately describing the asymmetric deformation and scale effects.We initially calculate the constitutive relations of two-dimensional(2D)cross-shaped multi-node chiral lattices and subsequently extend the method to three-dimensional(3D)lattices,successfully predicting the mechanical properties of both traditional and eccentric body-centered cubic(BCC)lattices.The theoretical model is validated through the finite element numerical verification which shows excellent consistency with the theoretical predictions.A further parametric study investigates the influence of geometric parameters,revealing the underlying size-effect mechanism.This paper provides a reliable theoretical tool for the design and property optimization of complex lattice materials.
基金by the Industry–Academia Cooperation Project No.113A00262(Te-Hua Fang).URLs to the sponsor websites are available at:https://www.nstc.gov.tw.
文摘The mechanical performance of exceedingly soft materials such as Ag is significantly influenced by various working conditions.Therefore,this study systematically investigates the effects of crack geometry,substrate crystal orientation,and indenter shape on crack propagation.The mechanical response of Ag is analyzed using the quasi-continuum(QC)method.A pre-crack with a predefined depth and angle was introduced to initiate fracture behavior.The results show that when the pre-crack height is 50 A,the crack propagates rapidly as the imprint depth increases from0 to 7 A,grows steadily up to 15 A,and then accelerates sharply between 15 and 20 A.For other pre-crack heights,crack propagation occurs at a relatively faster rate.Substrates with[100],[010],and[001]crystal orientations promote crack extension,while the onset of plastic deformation(referred to as the yield point in this study)and the fracture strength both increase with increasing pre-crack height.The yield point,fracture strength,and stress intensity factors are highly sensitive to the pre-crack height.When the pre-crack angle is 90○,the fracture strength reaches its maximum of 0.2%higher than that of the uncracked sample-whereas at 0○,it reaches its minimum,still 53.8%higher than that of the uncracked sample.The sample model is conducted using AutoCAD software.The optimized quasicontinuum(QC)method is used to investigate the effects of different crack geometries,substrate crystal orientations,and indenter shapes on the crack extension of Ag material.Baskes and Dow(FBD)potential is borrowed to describe the interaction forces between Ag-Ag,Ni-Ag,and Ni-Ni.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.U25A20232,52325208,52173217,52202128)the Interdisciplinary Research Project for Young Teachers of USTB(Grant No.FRF-IDRY24-002)。
文摘As electronic technology continues to evolve towards miniaturization and integration,the demand for micro-refrigeration technology in microelectronic systems is increasing.Ferroelectric(FE)refrigeration technology based on the electrocaloric effect(ECE)has emerged as a highly promising candidate in this field,due to its advantages of high energy efficiency,simple structure,easy miniaturization,low cost,and environmental friendliness.The EC performance of FE materials essentially depends on the phase transition features under the coupled electric and thermal fields,making the E–T phase diagram a core tool for decoding the underlying mechanism of ECE.This paper reviews the development of EC materials,focusing on the comprehensive study of E–T phase diagrams.By correlating the microscopic phase structure of FE materials with the macroscopic physical properties,it clarifies the manipulation mechanism for enhanced ECE performance,providing theoretical support for the targeted design of high-performance EC materials.In the future,the introduction of data-driven methods is expected to enable the high-throughput construction of FE phase diagrams,thereby accelerating the optimization of high-performance EC materials and promoting the practical application of FE refrigeration technology.
基金supported by the National Natural Science Foundation of China through grant numbers 12002245 and 12172263the Science and Technology Research Program of Chongqing Municipal Education Commission through grant number KJQN202300742+1 种基金the National Natural Science Foundation of ChongqingMunicipality through grant number CSTB2025NSCQ-GPX0841Chongqing Jiaotong University through grant number F1220038.
文摘Granular materials exhibit complex macroscopic mechanical behaviors closely related to their microscalemicrostructural features.Traditional macroscopic phenomenological elasto-plastic models,however,usually have complex formulations and lack explicit relations to these microstructural features.To avoid these limitations,this study proposes a micromechanics-based softening hyperelastic model for granular materials,integrating softening hyperelasticity withmicrostructural insights to capture strain softening,critical state,and strain localization behaviors.The model has two key advantages:(1)a clear conceptualization,straightforward formulation,and ease of numerical implementation(via Abaqus UMAT subroutine in this study);(2)explicit incorporation of micro-scale features(e.g.,contact stiffness,particle size,porosity)to reveal their influences on macroscopic responses.An isotropic directional distribution density of contacts and three specific microstructures are considered,and their softening hyperelastic constitutive modulus tensors are explicitly derived.By introducing a softening factor and critical failure energy density,the model can describe geomaterial behaviors,simulating residual strength,X-shaped shear bands,and strain localization evolution.Numerical validations in comparison with themacro-scale hyperelastic model,Abaqus Drucker-Prager model,and the experiment confirm its accuracy.Parametric studies reveal critical dependencies:a normal to tangential contact stiffness ratio of 2-8(depending on stiffness magnitude),an internal length of 2-4 mm to ensure shear band formation,and a critical failure energy density(≤10 kJ/m^(3))to trigger strain softening and localization.Influences of the specific microstructures on strain localization and softening are investigated.The model also shows mesh independence due to the introduction of an internal length.The model’s applicability is further demonstrated by slope stability analysis,capturing slip surface evolution,and load-displacement characteristics.This study develops a robust microstructure-aware hyperelastic framework to describe the mechanical behaviors of granular materials,providing multiscale insights for geotechnical engineering applications.
