To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materi...Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.展开更多
Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,...Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.展开更多
Electrocatalytic glucose oxidation to high-value chemicals provides a sustainable route for biomass valorization.NiCo-based catalysts have emerged as promising candidates for glucose oxidation reaction owing to the in...Electrocatalytic glucose oxidation to high-value chemicals provides a sustainable route for biomass valorization.NiCo-based catalysts have emerged as promising candidates for glucose oxidation reaction owing to the intrinsic activity of Ni and Co catalytic centers.However,the dynamic evolution and atomic-scale synergy between these centers remain elusive.Herein,we fabricated NiCo_(2)O_(4)nanosheets supported on nickel foam,where Ni preferentially occupies tetrahedral sites to regulate the electronic configuration of octahedral Co.Experimental and theoretical results demonstrate that the incorporation of tetrahedral Ni induces low-to-intermediate spin transition in octahedral Co,thereby optimizing eg orbital occupancy and stabilizing active sites.This spin-state engineering establishes Ni-Co synergistic catalytic centers for the selective oxidation of glucose to formate(FA).At higher potential(≥1.4 V vs.RHE),octahedral Co undergoes reconstruction into excessive active CoOOH and CoO_(2)species,resulting in glucose overoxidation to CO_(2)and intensified competitive oxygen evolution.In contrast,at lower potentials(<1.4 V vs.RHE),tetrahedral Ni facilitates electron delocalization across the Ni–O–Co lattice,thereby stabilizing octahedral Co for glucose adsorption and oxidation.Subsequently,a coupled electrocatalytic system was constructed,achieving 80.7%FA yield with 91.3%Faradaic efficiency(FE)at NiCo_(2)O_(4)anode and H2 evolution rate of 696μmol h^(−1)with 99.9%FE at Pt cathode for 2 h under 1.35 V vs.RHE.This work provides a deep insight into spin-state regulation of the catalytic center,offering valuable guidance for rational catalyst design.展开更多
Selective depression of pyrite remains a major bottleneck in copper flotation,particularly when high-pyrite ores are processed and saline water is used.In such environments,conventional approaches using lime and inert...Selective depression of pyrite remains a major bottleneck in copper flotation,particularly when high-pyrite ores are processed and saline water is used.In such environments,conventional approaches using lime and inert grinding media often fail to discriminate ef-fectively between pyrite and valuable copper minerals due to strong copper activation on pyrite surfaces.This study introduced a novel approach using inorganic radicals generated from peroxymonosulfate(PMS)to selectively oxidize and depress pyrite.Flotation tests with synthetic high-pyrite ore blends showed that PMS significantly reduced pyrite recovery while maintaining or improving chalcopyrite flot-ation.Ethylenediaminetetraacetic acid(EDTA)extraction confirmed selective oxidation of pyrite,and electron paramagnetic resonance(EPR)spectroscopy identified hydroxyl(·OH)and sulfate(SO_(4)^(·-))radicals as the dominant reactive species.Iron ions from grinding me-dia and mineral surfaces were identified as key activators of PMS.A major insight was pyrite’s dual role,acting both as a radical scav-enger and an activator,which made it highly reactive and susceptible to radical-induced oxidation.This process converted surface copper-sulfur species into copper hydroxides,effectively suppressing pyrite flotation.While previous studies have applied EPR to detect radicals in simplified activator/precursor systems,this study provides the first direct mechanistic evidence of radical-driven selectivity in flotation by detecting inorganic radicals in a complex flotation slurry,thereby demonstrating their persistence under industrially relevant conditions and establishing a foundation for more effective and targeted flotation strategies.展开更多
Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxi...Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxidation reaction(GOR);however,glycerol inevitably dissociates and converts to carbon dioxide on the Pd surface,which results in its low total Faradaic efficiency(FE)for high-value-added products.Herein,a series of Pd/C and Pd10Bix/C catalysts were synthesized to investigate the GOR pathway.The Pd10Bi3/C catalyst with optimal Bi content achieved an excellent GOR mass activity of 7.5±0.2 A mgPd−1 and an outstanding total FE of 90%±3%,which are much higher than those values on Pd/C(1.2±0.2 A mgPd−1 for mass activity and 63%±4%for total FE).Combined results of in-situ attenuated total reflection surface enhanced infrared absorption spectroscopy and density functional theory calculations show that Bi suppresses the dissociation of glycerol through the“shielding effect”of Bi to the adjacent Pd sites,which weakens the adsorption strength of GOR intermediates on those sites.This work provides a new insight into the GOR mechanism and puts forward a valid strategy for the rational design of catalysts to enable the transformation of glycerol into high-value-added products.展开更多
The methanol oxidation reaction(MOR)to formic acid offers a promising alternative to the anodic oxygen evolution reaction(OER)in water electrolysis.However,the development of efficient and cost-effective catalysts rem...The methanol oxidation reaction(MOR)to formic acid offers a promising alternative to the anodic oxygen evolution reaction(OER)in water electrolysis.However,the development of efficient and cost-effective catalysts remains a primary challenge.In this study,an enhancement in catalytic MOR performance is achieved through the incorporation of Mn atoms with unsaturated t_(2g)orbitals into Ni_(3)Se_(4).Comprehensive experimental analyses and theoretical calculations reveal that substituting Ni with Mn induces strong electron-withdrawing effects,effectively modulating the local coordination environment of the metal centers.The presence of Mn also elongates Ni–Se(O)bonds,which reduces eg orbital occupancy and modifies the spin state of the material.Electrochemical measurements demonstrate that electrodes based on this optimized material exhibit a high spin state and deliver excellent catalytic activity,achieving a MOR current density up to∼190 mA cm^(−2)at 1.6 V.This performance enhancement is attributed to the favorable electronic configuration and reduced reaction energy barriers associated with the high-spin state.展开更多
The three-dimensional(3D) Pd-based nanoflower structures,assembled from two-dimensional(2D)nanosheets,are characterized by their stable and ordered configurations.These structures have been extensively designed as ano...The three-dimensional(3D) Pd-based nanoflower structures,assembled from two-dimensional(2D)nanosheets,are characterized by their stable and ordered configurations.These structures have been extensively designed as anode materials for fuel cells.However,the exploration of trimetallic nanoflowers with porous architectures remains limited.In this study,we present a straightforward one-step solvothermal method for the synthesis of trimetallic Pd Cu Ni porous nanoflowers(PNFs).Leveraging several unique advantages,such as an open superstructure,high porosity,and enhanced electronic interactions among the trimetals,the resulting Pd Cu Ni PNFs demonstrate significantly improved electrochemical performance,with mass activities reaching 5.94 and 10.14 A/mg for the ethanol oxidation reaction(EOR)and the ethylene glycol oxidation reaction(EGOR),respectively.Furthermore,the Pd Cu Ni PNFs exhibit optimized d-band centers and the most negative onset oxidation potential,indicating enhanced antitoxicity and stability.This study not only provides a novel perspective on the synthesis of 3D porous nanomaterials but also highlights the potential application value of trimetallic nanoalloys in catalysis.展开更多
Alzheimer’s disease(AD)is a complex neurodegenerative disorder associated with changes in inflammation,oxidative stress,and gut microbiota composition.Butyrolactone Ⅰ(BTL-Ⅰ),a fungal metabolite,has shown anti-infla...Alzheimer’s disease(AD)is a complex neurodegenerative disorder associated with changes in inflammation,oxidative stress,and gut microbiota composition.Butyrolactone Ⅰ(BTL-Ⅰ),a fungal metabolite,has shown anti-inflammatory,microbiota regulating,and memory-improving potentials in previous in vitro and AlCl3-induced zebrafish studies.However,its effects of memory-improving and gutbrain axis regulating on Aβ-induced mammalian AD models have not been explored.In this study,intragastric administrated BTL-Ⅰ ameliorated cognitive deficits related to recognition and spatial memory impaired by Aβ_(1-42)intracerebroventricular injection in mice.BTL-Ⅰ maintained gut microbiota balance by increasing the abundance of Blautia,Muribaculaceae,Bacteroides,Akkermansia,etc.,and decreasing CAG-352,Clostridia UCG-014,different Lachnospiraceae groups,etc.,and Firmicutes/Bacteroidota ratio and elevated the levels of short-chain fatty acids.Additionally,it alleviated intestinal oxidative stress,inflammatory responses,and pathological damage.Furthermore,BTL-I reversed Aβ_(1-42)-induced activation of microglia and astrocytes in the hippocampus and inhibited the elevated oxidative stress and proinflammatory cytokines in both plasma and brain.The correlation analysis between the regulated taxa and biomarkers supports the role of gut microbiota in adjusting inflammation,oxidative stress,and memory.In conclusion,BTL-I may serve as a valuable drug lead for treating Alzheimer’s disease by systematically inhibiting microbiota imbalance,inflammation,and oxidative stress along the gut-brain axis.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
Investigating structural and hydroxyl group effects in electrooxidation of alcohols to value-added products by solid-acid electrocatalysts is essential for upgrading biomass alcohols.Herein,we report efficient electro...Investigating structural and hydroxyl group effects in electrooxidation of alcohols to value-added products by solid-acid electrocatalysts is essential for upgrading biomass alcohols.Herein,we report efficient electrocatalytic oxidations of saturated alcohols(C_(1)-C_(6))to selectively form formate using Ni Co hydroxide(Ni Co-OH)derived Ni Co_(2)O_(4)solid-acid electrocatalysts with balanced Lewis acid(LASs)and Brønsted acid sites(BASs).Thermal treatment transforms BASs-rich(89.6%)Ni Co-OH into Ni Co_(2)O_(4)with nearly equal distribution of LASs(53.1%)and BASs(46.9%)which synergistically promote adsorption and activation of OH-and alcohol molecules for enhanced oxidation activity.In contrast,BASs-enriched Ni Co-OH facilitates formation of higher valence metal sites,beneficial for water oxidation.The combined experimental studies and theoretical calculation imply the oxidation ability of C1-C6alcohols increases as increased number of hydroxyl groups and decreased HOMO-LUMO gaps:methanol(C_(1))<ethylene glycol(C_(2))<glycerol(C3)<meso-erythritol(C4)<xylitol(C5)<sorbitol(C6),while the formate selectivity shows the opposite trend from 100 to 80%.This study unveils synergistic roles of LASs and BASs,as well as hydroxyl group effect in electro-upgrading of alcohols using solid-acid electrocatalysts.展开更多
In the paper,we report a highly robust and porous bimetallic Ti-MOF(designated Mg_(2)Ti-ABTC)by utiliz-ing a trinuclear[Mg_(2)TiO(COO)_(6)]cluster and a tetradentate H_(4)ABTC(3,3′,5,5′-azobenzene tetracarboxylic ac...In the paper,we report a highly robust and porous bimetallic Ti-MOF(designated Mg_(2)Ti-ABTC)by utiliz-ing a trinuclear[Mg_(2)TiO(COO)_(6)]cluster and a tetradentate H_(4)ABTC(3,3′,5,5′-azobenzene tetracarboxylic acid)ligand.Mg_(2)Ti-ABTC exhibited permanent porosity for N_(2),CO_(2),CH_(4),C_(2)H_(2),C_(2)H_(4),and C_(2)H_(6)gas adsorption.Further-more,Mg_(2)Ti-ABTC exhibited outstanding photocatalytic activity in the oxidation of aromatic sulfides to the corre-sponding sulfoxides under ambient air conditions.Mechanism studies reveal that photoinduced holes(h^(+)),the super-oxide radical(·O_(2)^(-)),and singlet oxygen(^(1)O_(2))are pivotal species involved in the photocatalytic oxidation reaction.展开更多
Up-and-coming high-temperature materials,refractory high entropy alloys,are suffering from lower oxidation resistance,restricting their applications in the aerospace field.In this study,two novel treatments of Al-depo...Up-and-coming high-temperature materials,refractory high entropy alloys,are suffering from lower oxidation resistance,restricting their applications in the aerospace field.In this study,two novel treatments of Al-deposited and remelted were developed to refine the microstructure and enhance the oxidation resistance of refractory high entropy alloy using electron beam freeform fabrication(EBF3).Finer and short-range ordering structures were observed in the remelted sample,whereas the Al-deposited sample showcased the formation of silicide and intermetallic phases.High-temperature cyclic and isothermal oxidation tests at 1000℃ were carried out.The total weight gain after 60 h of cyclic oxidation decreased by 17.49%and 30.46%for the remelted and deposited samples,respectively,compared to the as-cast state.Oxidation kinetics reveal an evident lower mass gain and oxidation rate in the treated samples.A multilayer oxide consisting of TiO_(2)+Al_(2)O_(3)+SiO_(2)+AlNbO_(4) was studied for its excellent oxidation resistance.The oxidation behavior of rutile,corundum and other oxides was analyzed using first principles calculations and chemical defect analysis.Overall,this research,which introduces novel treatments,offers promising insights for enhancing the inherent oxidation resistance of refractory high entropy alloys.展开更多
Pitch produced by the lique-faction of coal was divided into two frac-tions:soluble in toluene(TS)and insol-uble in toluene but soluble in pyridine(TI-PS),and their differences in molecu-lar structure and oxidation ac...Pitch produced by the lique-faction of coal was divided into two frac-tions:soluble in toluene(TS)and insol-uble in toluene but soluble in pyridine(TI-PS),and their differences in molecu-lar structure and oxidation activity were studied.Several different carbon materi-als were produced from them by oxida-tion in air(350℃,300 mL/min)fol-lowed by carbonization(1000℃ in Ar),and the effect of the cross-linked structure on their structure and sodium storage properties was investigated.The results showed that the two pitch fractions were obviously different after the air oxidation.The TS fraction with a low degree of condensation and abundant side chains had a stronger oxidation activity and thus introduced more cross-linked oxygen-containing functional groups C(O)―O which prevented carbon layer rearrangement during the carbonization.As a result,a disordered hard carbon with more defects was formed,which improved the electrochemical performance.Therefore,the carbon materials derived from TS(O-TS-1000)had an obvious disordered structure and a larger layer spacing,giving them better sodium storage perform-ance than those derived from the TI-PS fraction(O-TI-PS-1000).The specific capacity of O-TS-1000 was about 250 mAh/g at 20 mA/g,which was 1.67 times higher than that of O-TI-PS-1000(150 mAh/g).展开更多
Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,a...Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.展开更多
The novel Co-based superalloys are extensively used in gas-powered and jet engine turbines due to their excellent high-temperature performance, achieved by strengthening the L12-γ′ ordered phase. This review present...The novel Co-based superalloys are extensively used in gas-powered and jet engine turbines due to their excellent high-temperature performance, achieved by strengthening the L12-γ′ ordered phase. This review presents an overview of the research progress on oxidation behavior of Co-based superalloys, including oxidation kinetics, oxides morphology, the formation and spallation of oxide layers, and importantly, the synergistic effects of alloying elements on oxidation resistance—a critical area considering the complex interactions with multiple alloying elements. Additionally, this review compares the oxidation resistance of single crystal versus polycrystalline alloys. The effect of phase interface and dislocations on oxidation behavior is also discussed. While significant progress has been achieved, areas necessitating further investigation include optimizing alloy compositions for enhanced oxidation resistance and understanding the long-term stability of oxide layers. The future prospects for Co-based superalloys are promising as ongoing research aims to address the existing challenges and unlock new applications at even higher operating temperatures.展开更多
Oxidation resistance is a critical metric for assessing the high-temperature property of superalloys.Tra-ditional models are often constrained by the parabolic rate law,limiting their ability to simulate com-plex oxid...Oxidation resistance is a critical metric for assessing the high-temperature property of superalloys.Tra-ditional models are often constrained by the parabolic rate law,limiting their ability to simulate com-plex oxidation behavior.This study introduces a hybrid machine learning model that combines a one-dimensional convolutional neural network with a long short-term memory network to predict oxidation behavior with high accuracy(R^(2)=0.981)and smoothness.The model demonstrates improved predictive performance across various stages of oxidation,successfully fitting a wide range of oxidation kinetics and accurately estimating the activation energy for the Co-9W-9Al-0.12B alloy.It also identifies the critical Cr content range for the transition from internal to external oxidation in Co-based superalloys,which aligns well with experimental results and theoretical calculations.Although this study focuses on Co-based su-peralloys,the versatility extends its applicability to other superalloy systems,paving the way for future research in materials science.展开更多
Traumatic brain injury involves complex pathophysiological mechanisms,among which oxidative stress significantly contributes to the occurrence of secondary injury.In this study,we evaluated hypidone hydrochloride(YL-0...Traumatic brain injury involves complex pathophysiological mechanisms,among which oxidative stress significantly contributes to the occurrence of secondary injury.In this study,we evaluated hypidone hydrochloride(YL-0919),a self-developed antidepressant with selective sigma-1 receptor agonist properties,and its associated mechanisms and targets in traumatic brain injury.Behavioral experiments to assess functional deficits were followed by assessment of neuronal damage through histological analyses and examination of blood-brain barrier permeability and brain edema.Next,we investigated the antioxidative effects of YL-0919 by assessing the levels of traditional markers of oxidative stress in vivo in mice and in vitro in HT22 cells.Finally,the targeted action of YL-0919 was verified by employing a sigma-1 receptor antagonist(BD-1047).Our findings demonstrated that YL-0919 markedly improved deficits in motor function and spatial cognition on day 3 post traumatic brain injury,while also decreasing neuronal mortality and reversing blood-brain barrier disruption and brain edema.Furthermore,YL-0919 effectively combated oxidative stress both in vivo and in vitro.The protective effects of YL-0919 were partially inhibited by BD-1047.These results indicated that YL-0919 relieved impairments in motor and spatial cognition by restraining oxidative stress,a neuroprotective effect that was partially reversed by the sigma-1 receptor antagonist BD-1047.YL-0919 may have potential as a new treatment for traumatic brain injury.展开更多
Nano-zinc oxides(ZnO)demonstrate remarkable antibacterial properties.To further enhance the corrosion resistance and antibacterial efficiency of magnesium alloy micro-arc oxidation(MAO)coatings,this study investigates...Nano-zinc oxides(ZnO)demonstrate remarkable antibacterial properties.To further enhance the corrosion resistance and antibacterial efficiency of magnesium alloy micro-arc oxidation(MAO)coatings,this study investigates the preparation of ZnO-containing micro-arc oxidation coatings with dual functionality by incorporating nano-ZnO into MAO electrolyte.The influence of varying ZnO concentrations on the microstructure,corrosion resistance,and antibacterial properties of the coating was examined through microstructure analysis,immersion tests,electrochemical experiments,and antibacterial assays.The findings revealed that the addition of nano-ZnO significantly enhanced the corrosion resistance of the MAO-coated alloy.Specifically,when the ZnO concentration in the electrolyte was 5 g/L,the corrosion rate was more than ten times lower compared to the MAO coatings without ZnO.Moreover,the antibacterial efficacy of ZnO+MAO coating,prepared with a ZnO concentration of 5 g/L,surpassed 95%after 24 h of co-culturing with Staphylococcus aureus(S.aureus).The nano-ZnO+MAO-coated alloy exhibited exceptional degradation resistance,corrosion resistance,and antibacterial effectiveness.展开更多
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
文摘Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.
基金supported by the National Key Research and Development Program of China(2024YFA1612900)the National Natural Science Foundation of China(Grant No.52103365 and No.12375270)the Guangdong Innovative and Entrepreneurial Research Team Program,China(Grant No.2021ZT09L227).
文摘Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.
基金financially supported by the National Natural Science Foundation of China(22472199)Chinese Universities Scientific Fund(15055009)and Central University Guided Funds for Building World-Class Universities(Disciplines)and Advancing Characteristic Development.The authors extend their gratitude to Theoretical and Computational Chemistry Team(from Scientific Compass www.shiyanjia.com)for providing invaluable assistance.
文摘Electrocatalytic glucose oxidation to high-value chemicals provides a sustainable route for biomass valorization.NiCo-based catalysts have emerged as promising candidates for glucose oxidation reaction owing to the intrinsic activity of Ni and Co catalytic centers.However,the dynamic evolution and atomic-scale synergy between these centers remain elusive.Herein,we fabricated NiCo_(2)O_(4)nanosheets supported on nickel foam,where Ni preferentially occupies tetrahedral sites to regulate the electronic configuration of octahedral Co.Experimental and theoretical results demonstrate that the incorporation of tetrahedral Ni induces low-to-intermediate spin transition in octahedral Co,thereby optimizing eg orbital occupancy and stabilizing active sites.This spin-state engineering establishes Ni-Co synergistic catalytic centers for the selective oxidation of glucose to formate(FA).At higher potential(≥1.4 V vs.RHE),octahedral Co undergoes reconstruction into excessive active CoOOH and CoO_(2)species,resulting in glucose overoxidation to CO_(2)and intensified competitive oxygen evolution.In contrast,at lower potentials(<1.4 V vs.RHE),tetrahedral Ni facilitates electron delocalization across the Ni–O–Co lattice,thereby stabilizing octahedral Co for glucose adsorption and oxidation.Subsequently,a coupled electrocatalytic system was constructed,achieving 80.7%FA yield with 91.3%Faradaic efficiency(FE)at NiCo_(2)O_(4)anode and H2 evolution rate of 696μmol h^(−1)with 99.9%FE at Pt cathode for 2 h under 1.35 V vs.RHE.This work provides a deep insight into spin-state regulation of the catalytic center,offering valuable guidance for rational catalyst design.
基金support from the Australian Research Council(ARC)Linkage Project(No.LP230100166).
文摘Selective depression of pyrite remains a major bottleneck in copper flotation,particularly when high-pyrite ores are processed and saline water is used.In such environments,conventional approaches using lime and inert grinding media often fail to discriminate ef-fectively between pyrite and valuable copper minerals due to strong copper activation on pyrite surfaces.This study introduced a novel approach using inorganic radicals generated from peroxymonosulfate(PMS)to selectively oxidize and depress pyrite.Flotation tests with synthetic high-pyrite ore blends showed that PMS significantly reduced pyrite recovery while maintaining or improving chalcopyrite flot-ation.Ethylenediaminetetraacetic acid(EDTA)extraction confirmed selective oxidation of pyrite,and electron paramagnetic resonance(EPR)spectroscopy identified hydroxyl(·OH)and sulfate(SO_(4)^(·-))radicals as the dominant reactive species.Iron ions from grinding me-dia and mineral surfaces were identified as key activators of PMS.A major insight was pyrite’s dual role,acting both as a radical scav-enger and an activator,which made it highly reactive and susceptible to radical-induced oxidation.This process converted surface copper-sulfur species into copper hydroxides,effectively suppressing pyrite flotation.While previous studies have applied EPR to detect radicals in simplified activator/precursor systems,this study provides the first direct mechanistic evidence of radical-driven selectivity in flotation by detecting inorganic radicals in a complex flotation slurry,thereby demonstrating their persistence under industrially relevant conditions and establishing a foundation for more effective and targeted flotation strategies.
基金supported by the National Natural Science Foundation of China(Grant number 22172112)and the Fundamental Research Funds for the Central Universities.
文摘Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxidation reaction(GOR);however,glycerol inevitably dissociates and converts to carbon dioxide on the Pd surface,which results in its low total Faradaic efficiency(FE)for high-value-added products.Herein,a series of Pd/C and Pd10Bix/C catalysts were synthesized to investigate the GOR pathway.The Pd10Bi3/C catalyst with optimal Bi content achieved an excellent GOR mass activity of 7.5±0.2 A mgPd−1 and an outstanding total FE of 90%±3%,which are much higher than those values on Pd/C(1.2±0.2 A mgPd−1 for mass activity and 63%±4%for total FE).Combined results of in-situ attenuated total reflection surface enhanced infrared absorption spectroscopy and density functional theory calculations show that Bi suppresses the dissociation of glycerol through the“shielding effect”of Bi to the adjacent Pd sites,which weakens the adsorption strength of GOR intermediates on those sites.This work provides a new insight into the GOR mechanism and puts forward a valid strategy for the rational design of catalysts to enable the transformation of glycerol into high-value-added products.
基金financially supported by the Sichuan Science and Technology Program(Grant No.2025NSFSC0139)the China Postdoctoral Science Foundation(Grant No.2023MD734228)+5 种基金The authors extend their gratitude to Ms.Zhou Yuke(from Scientific Compass www.shiyanjia.com)for providing invaluable assistance with the XPS analysis.ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU(PRTR-C17.I1)by Generalitat de Catalunya(In-CAEM Project)The authors thank the support from the project AMaDE(PID2023-149158OB-C43)funded by MCIN/AEI/10.13039/501100011033/and by“ERDF A way of making Europe”,by the“European Union”.ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI(Grant No.:CEX2021-001214-S)is funded by the CERCA Programme/Generalitat de Catalunya.Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program.JY has received funding from the CSC-UAB PhD scholarship program.ICN2 is founding member of e-DREAM[87].
文摘The methanol oxidation reaction(MOR)to formic acid offers a promising alternative to the anodic oxygen evolution reaction(OER)in water electrolysis.However,the development of efficient and cost-effective catalysts remains a primary challenge.In this study,an enhancement in catalytic MOR performance is achieved through the incorporation of Mn atoms with unsaturated t_(2g)orbitals into Ni_(3)Se_(4).Comprehensive experimental analyses and theoretical calculations reveal that substituting Ni with Mn induces strong electron-withdrawing effects,effectively modulating the local coordination environment of the metal centers.The presence of Mn also elongates Ni–Se(O)bonds,which reduces eg orbital occupancy and modifies the spin state of the material.Electrochemical measurements demonstrate that electrodes based on this optimized material exhibit a high spin state and deliver excellent catalytic activity,achieving a MOR current density up to∼190 mA cm^(−2)at 1.6 V.This performance enhancement is attributed to the favorable electronic configuration and reduced reaction energy barriers associated with the high-spin state.
基金supported by the National Natural Science Foundation of China (No.52274304)。
文摘The three-dimensional(3D) Pd-based nanoflower structures,assembled from two-dimensional(2D)nanosheets,are characterized by their stable and ordered configurations.These structures have been extensively designed as anode materials for fuel cells.However,the exploration of trimetallic nanoflowers with porous architectures remains limited.In this study,we present a straightforward one-step solvothermal method for the synthesis of trimetallic Pd Cu Ni porous nanoflowers(PNFs).Leveraging several unique advantages,such as an open superstructure,high porosity,and enhanced electronic interactions among the trimetals,the resulting Pd Cu Ni PNFs demonstrate significantly improved electrochemical performance,with mass activities reaching 5.94 and 10.14 A/mg for the ethanol oxidation reaction(EOR)and the ethylene glycol oxidation reaction(EGOR),respectively.Furthermore,the Pd Cu Ni PNFs exhibit optimized d-band centers and the most negative onset oxidation potential,indicating enhanced antitoxicity and stability.This study not only provides a novel perspective on the synthesis of 3D porous nanomaterials but also highlights the potential application value of trimetallic nanoalloys in catalysis.
基金Supported by the Guangdong Provincial Natural Science Foundation(No.2022A1515010783)the Sustainable Development Program of Shenzhen Science and Technology Major Program(No.KCXFZ20240903093925033)+4 种基金the Guangdong Provincial Special Project in Science and Technology(No.2021A05240)the Special Project in Key Fields of Guangdong Provincial Higher Education Institutions(No.2021ZDZX2064)the Basic Research Project of Shenzhen Science and Technology Innovation Commission(No.JCYJ20220530162014032)the Zhanjiang Marine Youth Talent Innovation Project(No.2022E05010)the Program for Scientific Research Start-up Funds of Guangdong Ocean University(Nos.R18008,060302042201)。
文摘Alzheimer’s disease(AD)is a complex neurodegenerative disorder associated with changes in inflammation,oxidative stress,and gut microbiota composition.Butyrolactone Ⅰ(BTL-Ⅰ),a fungal metabolite,has shown anti-inflammatory,microbiota regulating,and memory-improving potentials in previous in vitro and AlCl3-induced zebrafish studies.However,its effects of memory-improving and gutbrain axis regulating on Aβ-induced mammalian AD models have not been explored.In this study,intragastric administrated BTL-Ⅰ ameliorated cognitive deficits related to recognition and spatial memory impaired by Aβ_(1-42)intracerebroventricular injection in mice.BTL-Ⅰ maintained gut microbiota balance by increasing the abundance of Blautia,Muribaculaceae,Bacteroides,Akkermansia,etc.,and decreasing CAG-352,Clostridia UCG-014,different Lachnospiraceae groups,etc.,and Firmicutes/Bacteroidota ratio and elevated the levels of short-chain fatty acids.Additionally,it alleviated intestinal oxidative stress,inflammatory responses,and pathological damage.Furthermore,BTL-I reversed Aβ_(1-42)-induced activation of microglia and astrocytes in the hippocampus and inhibited the elevated oxidative stress and proinflammatory cytokines in both plasma and brain.The correlation analysis between the regulated taxa and biomarkers supports the role of gut microbiota in adjusting inflammation,oxidative stress,and memory.In conclusion,BTL-I may serve as a valuable drug lead for treating Alzheimer’s disease by systematically inhibiting microbiota imbalance,inflammation,and oxidative stress along the gut-brain axis.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金the financial support from the National Natural Science Foundation of China(52172110,52472231,52311530113)Shanghai"Science and Technology Innovation Action Plan"intergovernmental international science and technology cooperation project(23520710600)+1 种基金Science and Technology Commission of Shanghai Municipality(22DZ1205600)the Central Guidance on Science and Technology Development Fund of Zhejiang Province(2024ZY01011)。
文摘Investigating structural and hydroxyl group effects in electrooxidation of alcohols to value-added products by solid-acid electrocatalysts is essential for upgrading biomass alcohols.Herein,we report efficient electrocatalytic oxidations of saturated alcohols(C_(1)-C_(6))to selectively form formate using Ni Co hydroxide(Ni Co-OH)derived Ni Co_(2)O_(4)solid-acid electrocatalysts with balanced Lewis acid(LASs)and Brønsted acid sites(BASs).Thermal treatment transforms BASs-rich(89.6%)Ni Co-OH into Ni Co_(2)O_(4)with nearly equal distribution of LASs(53.1%)and BASs(46.9%)which synergistically promote adsorption and activation of OH-and alcohol molecules for enhanced oxidation activity.In contrast,BASs-enriched Ni Co-OH facilitates formation of higher valence metal sites,beneficial for water oxidation.The combined experimental studies and theoretical calculation imply the oxidation ability of C1-C6alcohols increases as increased number of hydroxyl groups and decreased HOMO-LUMO gaps:methanol(C_(1))<ethylene glycol(C_(2))<glycerol(C3)<meso-erythritol(C4)<xylitol(C5)<sorbitol(C6),while the formate selectivity shows the opposite trend from 100 to 80%.This study unveils synergistic roles of LASs and BASs,as well as hydroxyl group effect in electro-upgrading of alcohols using solid-acid electrocatalysts.
文摘In the paper,we report a highly robust and porous bimetallic Ti-MOF(designated Mg_(2)Ti-ABTC)by utiliz-ing a trinuclear[Mg_(2)TiO(COO)_(6)]cluster and a tetradentate H_(4)ABTC(3,3′,5,5′-azobenzene tetracarboxylic acid)ligand.Mg_(2)Ti-ABTC exhibited permanent porosity for N_(2),CO_(2),CH_(4),C_(2)H_(2),C_(2)H_(4),and C_(2)H_(6)gas adsorption.Further-more,Mg_(2)Ti-ABTC exhibited outstanding photocatalytic activity in the oxidation of aromatic sulfides to the corre-sponding sulfoxides under ambient air conditions.Mechanism studies reveal that photoinduced holes(h^(+)),the super-oxide radical(·O_(2)^(-)),and singlet oxygen(^(1)O_(2))are pivotal species involved in the photocatalytic oxidation reaction.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFF0609000)National Natural Science Foundation of China(Grant Nos.52171034 and 52101037)Postdoctoral Fellowship Program of CPSFara(No.GZB20230944).
文摘Up-and-coming high-temperature materials,refractory high entropy alloys,are suffering from lower oxidation resistance,restricting their applications in the aerospace field.In this study,two novel treatments of Al-deposited and remelted were developed to refine the microstructure and enhance the oxidation resistance of refractory high entropy alloy using electron beam freeform fabrication(EBF3).Finer and short-range ordering structures were observed in the remelted sample,whereas the Al-deposited sample showcased the formation of silicide and intermetallic phases.High-temperature cyclic and isothermal oxidation tests at 1000℃ were carried out.The total weight gain after 60 h of cyclic oxidation decreased by 17.49%and 30.46%for the remelted and deposited samples,respectively,compared to the as-cast state.Oxidation kinetics reveal an evident lower mass gain and oxidation rate in the treated samples.A multilayer oxide consisting of TiO_(2)+Al_(2)O_(3)+SiO_(2)+AlNbO_(4) was studied for its excellent oxidation resistance.The oxidation behavior of rutile,corundum and other oxides was analyzed using first principles calculations and chemical defect analysis.Overall,this research,which introduces novel treatments,offers promising insights for enhancing the inherent oxidation resistance of refractory high entropy alloys.
文摘Pitch produced by the lique-faction of coal was divided into two frac-tions:soluble in toluene(TS)and insol-uble in toluene but soluble in pyridine(TI-PS),and their differences in molecu-lar structure and oxidation activity were studied.Several different carbon materi-als were produced from them by oxida-tion in air(350℃,300 mL/min)fol-lowed by carbonization(1000℃ in Ar),and the effect of the cross-linked structure on their structure and sodium storage properties was investigated.The results showed that the two pitch fractions were obviously different after the air oxidation.The TS fraction with a low degree of condensation and abundant side chains had a stronger oxidation activity and thus introduced more cross-linked oxygen-containing functional groups C(O)―O which prevented carbon layer rearrangement during the carbonization.As a result,a disordered hard carbon with more defects was formed,which improved the electrochemical performance.Therefore,the carbon materials derived from TS(O-TS-1000)had an obvious disordered structure and a larger layer spacing,giving them better sodium storage perform-ance than those derived from the TI-PS fraction(O-TI-PS-1000).The specific capacity of O-TS-1000 was about 250 mAh/g at 20 mA/g,which was 1.67 times higher than that of O-TI-PS-1000(150 mAh/g).
基金National Natural Science Foundation of China(52071126)Natural Science Foundation of Tianjin City,China(22JCQNJC01240)+2 种基金Central Guidance on Local Science and Technology Development Fund of Hebei Province(226Z1009G)Special Funds for Science and Technology Innovation in Hebei(2022X19)Anhui Provincial Natural Science Foundation(2308085ME135)。
文摘Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.
基金support from the National Natural Science Foundation of China(Nos.52171107,52201203)the Hebei Provincial Natural Science Foundation,China(No.E2021501026)the National Natural Science Foundation of China-Joint Fund of Iron and Steel Research(No.U1960204).
文摘The novel Co-based superalloys are extensively used in gas-powered and jet engine turbines due to their excellent high-temperature performance, achieved by strengthening the L12-γ′ ordered phase. This review presents an overview of the research progress on oxidation behavior of Co-based superalloys, including oxidation kinetics, oxides morphology, the formation and spallation of oxide layers, and importantly, the synergistic effects of alloying elements on oxidation resistance—a critical area considering the complex interactions with multiple alloying elements. Additionally, this review compares the oxidation resistance of single crystal versus polycrystalline alloys. The effect of phase interface and dislocations on oxidation behavior is also discussed. While significant progress has been achieved, areas necessitating further investigation include optimizing alloy compositions for enhanced oxidation resistance and understanding the long-term stability of oxide layers. The future prospects for Co-based superalloys are promising as ongoing research aims to address the existing challenges and unlock new applications at even higher operating temperatures.
基金supported by the National Natural Science Foundation of China(Nos.52171107 and 52471004)the Industry-University-Research Cooperation Project of Hebei Based Universities and Shijiazhuang City(No.241791237A)the Funded by Science and Technology Project of Hebei Education De-partment(No.QN2023155).
文摘Oxidation resistance is a critical metric for assessing the high-temperature property of superalloys.Tra-ditional models are often constrained by the parabolic rate law,limiting their ability to simulate com-plex oxidation behavior.This study introduces a hybrid machine learning model that combines a one-dimensional convolutional neural network with a long short-term memory network to predict oxidation behavior with high accuracy(R^(2)=0.981)and smoothness.The model demonstrates improved predictive performance across various stages of oxidation,successfully fitting a wide range of oxidation kinetics and accurately estimating the activation energy for the Co-9W-9Al-0.12B alloy.It also identifies the critical Cr content range for the transition from internal to external oxidation in Co-based superalloys,which aligns well with experimental results and theoretical calculations.Although this study focuses on Co-based su-peralloys,the versatility extends its applicability to other superalloy systems,paving the way for future research in materials science.
基金supported by the National Natural Science Foundation of China,Nos.82204360(to HM)and 82270411(to GW)National Science and Technology Innovation 2030 Major Program,No.2021ZD0200900(to YL)。
文摘Traumatic brain injury involves complex pathophysiological mechanisms,among which oxidative stress significantly contributes to the occurrence of secondary injury.In this study,we evaluated hypidone hydrochloride(YL-0919),a self-developed antidepressant with selective sigma-1 receptor agonist properties,and its associated mechanisms and targets in traumatic brain injury.Behavioral experiments to assess functional deficits were followed by assessment of neuronal damage through histological analyses and examination of blood-brain barrier permeability and brain edema.Next,we investigated the antioxidative effects of YL-0919 by assessing the levels of traditional markers of oxidative stress in vivo in mice and in vitro in HT22 cells.Finally,the targeted action of YL-0919 was verified by employing a sigma-1 receptor antagonist(BD-1047).Our findings demonstrated that YL-0919 markedly improved deficits in motor function and spatial cognition on day 3 post traumatic brain injury,while also decreasing neuronal mortality and reversing blood-brain barrier disruption and brain edema.Furthermore,YL-0919 effectively combated oxidative stress both in vivo and in vitro.The protective effects of YL-0919 were partially inhibited by BD-1047.These results indicated that YL-0919 relieved impairments in motor and spatial cognition by restraining oxidative stress,a neuroprotective effect that was partially reversed by the sigma-1 receptor antagonist BD-1047.YL-0919 may have potential as a new treatment for traumatic brain injury.
基金supported by the National Natural Science Foundation of China(No.52001034)the China Postdoctoral Science Foundation(No.2023M731677)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX23_3032).
文摘Nano-zinc oxides(ZnO)demonstrate remarkable antibacterial properties.To further enhance the corrosion resistance and antibacterial efficiency of magnesium alloy micro-arc oxidation(MAO)coatings,this study investigates the preparation of ZnO-containing micro-arc oxidation coatings with dual functionality by incorporating nano-ZnO into MAO electrolyte.The influence of varying ZnO concentrations on the microstructure,corrosion resistance,and antibacterial properties of the coating was examined through microstructure analysis,immersion tests,electrochemical experiments,and antibacterial assays.The findings revealed that the addition of nano-ZnO significantly enhanced the corrosion resistance of the MAO-coated alloy.Specifically,when the ZnO concentration in the electrolyte was 5 g/L,the corrosion rate was more than ten times lower compared to the MAO coatings without ZnO.Moreover,the antibacterial efficacy of ZnO+MAO coating,prepared with a ZnO concentration of 5 g/L,surpassed 95%after 24 h of co-culturing with Staphylococcus aureus(S.aureus).The nano-ZnO+MAO-coated alloy exhibited exceptional degradation resistance,corrosion resistance,and antibacterial effectiveness.
