Due to its high efficiency,Fe(Ⅱ)-based catalytic oxidation has been one of the most popular types of technology for treating growing organic pollutants.A lot of chemical Fe sludge alongwith various refractory polluta...Due to its high efficiency,Fe(Ⅱ)-based catalytic oxidation has been one of the most popular types of technology for treating growing organic pollutants.A lot of chemical Fe sludge alongwith various refractory pollutantswas concomitantly produced,whichmay cause secondary environmental problemswithout proper disposal.We here innovatively proposed an effective method of achieving zero Fe sludge,reusing Fe resources(Fe recovery=100%)and advancing organics removal(final TOC removal>70%)simultaneously,based on the in situ formation of magnetic Ca-Fe layered double hydroxide(Fe_(3)O_(4)@CaFe-LDH)nano-material.Cations(Ca^(2+)and Fe^(3+))concentration(≥30 mmol/L)and their molar ratio(Ca:Fe≥1.75)were crucial to the success of the method.Extrinsic nano Fe_(3)O_(4)was designed to be involved in the Fe(Ⅱ)-catalytic wastewater treatment process,and was modified by oxidation intermediates/products(especially those with COO-structure),which promoted the co-precipitation of Ca^(2+)(originated from Ca(OH)_(2)added after oxidation process)and byproduced Fe^(3+)cations on its surface to in situ generate core-shell Fe_(3)O_(4)@CaFe-LDH.The oxidation products were further removed during Fe_(3)O_(4)@CaFe-LDH material formation via intercalation and adsorption.Thismethodwas applicable to many kinds of organicwastewater,such as bisphenol A,methyl orange,humics,and biogas slurry.The prepared magnetic and hierarchical CaFe-LDH nanocomposite material showed comparable application performance to the recently reported CaFe-LDHs.This work provides a new strategy for efficiently enhancing the efficiency and economy of Fe(Ⅱ)-catalyzed oxidative wastewater treatment by producing high value-added LDHs materials.展开更多
An electrochemical biosensing platform was developed based on glucose oxidase(GOx)/Fe3O4-reduced graphene oxide(Fe3O4-RGO) nanosheets loaded on the magnetic glassy carbon electrode(MGCE).With the advantages of the mag...An electrochemical biosensing platform was developed based on glucose oxidase(GOx)/Fe3O4-reduced graphene oxide(Fe3O4-RGO) nanosheets loaded on the magnetic glassy carbon electrode(MGCE).With the advantages of the magnetism, conductivity and biocompatibility of the Fe3O4-RGO nanosheets, the nanocomposites could be facilely adhered to the electrode surface by magnetically controllable assembling and beneficial to achieve the direct redox reactions and electrocatalytic behaviors of GOx immobilized into the nanocomposites. The biosensor exhibited good electrocatalytic activity, high sensitivity and stability. The current response is linear over glucose concentration ranging from 0.05 to 1.5 m M with a low detection limit of0.15 μM. Meanwhile, validation of the applicability of the biosensor was carried out by determining glucose in serum samples. The proposed protocol is simple, inexpensive and convenient, which shows great potential in biosensing application.展开更多
Bimetallic oxides composites have received an increasing attention as promising adsorbents for aqueous phosphate (P) removal in recent years. In this study, a novel magnetic composite MZLCO was prepared by hybridizing...Bimetallic oxides composites have received an increasing attention as promising adsorbents for aqueous phosphate (P) removal in recent years. In this study, a novel magnetic composite MZLCO was prepared by hybridizing amorphous Zr-La (carbonate) oxides (ZLCO) with nano-FeOthrough a one-pot solvothermal method for efficient phosphate adsorption. Our optimum sample of MZLCO-45 exhibited a high Langmuir maximum adsorption capacity of 96.16 mg P/g and performed well even at low phosphate concentration. The phosphate adsorption kinetics by MZLCO-45 fitted well with the pseudo-second-order model, and the adsorption capacity could reach 79% of the ultimate value within the first 60 min. The phosphate adsorption process was highly p H-dependent, and MZLCO-45 performed well over a wide p H range of 2.0-8.0. Moreover, MZLCO-45 showed a strong selectivity to phosphate in the presence of competing ions (Cl^(-), NO_(3)^(-), SO_(4)^(2-), HCO_(3)^(-), Ca^(2+), and Mg^(2+)) and a good reusability using the eluent of Na OH/Na Cl mixture, then 64% adsorption capacity remained after ten recycles. The initial 2.0 mg P/L in municipal wastewater and surface water could be efficiently reduced to below 0.1mg P/L by 0.07 g/L MZLCO-45, and the phosphate removal efficiencies were 95.7% and 96.21%, respectively. Phosphate adsorption mechanisms by MZLCO-45 could be attributed to electrostatic attraction and the inner-sphere complexation via ligand exchange forming Zr/La-O-P, -OH and CO_(3)^(2-)groups on MZLCO-45 surface played important roles in the ligand exchange process. The existence of oxygen vacancies could accelerate the phosphate absorption rate of the MZLCO-45 composites.展开更多
In order to investigate the impedance matching properties of microwave absorbers,the ternary nanocomposites of GO/PANI/Fe3O4（GPF） are prepared via a two-step method,GO/PANI composites are synthesized by dilute polym...In order to investigate the impedance matching properties of microwave absorbers,the ternary nanocomposites of GO/PANI/Fe3O4（GPF） are prepared via a two-step method,GO/PANI composites are synthesized by dilute polymerization in the presence of aniline monomer and GO,and GO/PANI/Fe3O4 is prepared via a co-precipitation method.The obtained nanocomposites are characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD）,and Fourier transform infrared spectroscopy（FTIR）,respectively.The microwave absorbability reveals enhanced microwave absorption properties compared with GO,PANI,and GO/PANI.The maximum reflection loss of GO/PANI/Fe3O4 is up to-27 dB at 14 GHz with its thickness being 2 mm,and its absorption bandwidths exceeding-10 dB are more than 11.2 GHz with its thickness values being in the range from 1.5 mm-4 mm.It provides that GO/PANI/Fe3O4 can be used as an attractive candidate for microwave absorbers.展开更多
We describes a controllable synthesis procedure for growing a-Ee2O3 and Ee3O4 nanowires. High magnetic hematite a-Fe2O3 nanowires are successfully grown on Fe0.5Ni0.5 alloy substrates via an oxide assisted vapor-solid...We describes a controllable synthesis procedure for growing a-Ee2O3 and Ee3O4 nanowires. High magnetic hematite a-Fe2O3 nanowires are successfully grown on Fe0.5Ni0.5 alloy substrates via an oxide assisted vapor-solid process. Experimental results also indicate that previous immersion of the substrates in a solution of oxalic acid causes the grown nanowires to convert gradually into magnetite （Fe3O4） nanowires. Additionally, the saturated state of Fe3O4 nanowires is achieved as the oxalic acid concentration reaches 0.75 mol/L. The average diameter and length of nanowires expands with an increasing operation temperature and the growth density of nanowires accumulates with an increasing gas flux in the vapor-solid process. The growth mechanism of a-Fe2O3 and Fe3O4 nanowires is also discussed. The results demonstrate that the entire synthesis of nanowires can be completed within 2 h.展开更多
LaNi（0.6）Fe（0.4）O（3-δ） （LNF） powders were synthesized by the glycine-nitrate process and LNF-gadolinium-doped ceria （GDC） nanocomposite cathodes for solid oxide fuel cells （SOFCs） were fabricated by infil...LaNi（0.6）Fe（0.4）O（3-δ） （LNF） powders were synthesized by the glycine-nitrate process and LNF-gadolinium-doped ceria （GDC） nanocomposite cathodes for solid oxide fuel cells （SOFCs） were fabricated by infiltration from LNF porous backbones. Electrochemical properties and Cr-poisoning behavior of LNF-GDC cathodes were studied. Single phase perovskite LNF could be obtained at the glycine to nitrate molar ratio of 1：1. The polarization resistance of the LNF-GDC nanocomposite cathode was significantly decreased in comparison with the LNF. This phenomenon was associated with enhanced catalytic activity and enlarged triple-phase boundary （TPB） length by GDC nano particles. In addition, the nanocomposite cathode showed good Cr tolerance under open circuit condition. The LNF-GDC nanocomposite cathodes were expected for use as a potential cathode in intermediate- temperature solid oxide fuel cells （IT-SOFC）.展开更多
Reduced graphene oxide-Fe3O4（rGO—Fe3O4） composite has been prepared via a facile and effective hydrothermal method by synthesizing Fe3O4 nanospheres on the planes of reduced graphene oxide（rGO）.Characterizations ...Reduced graphene oxide-Fe3O4（rGO—Fe3O4） composite has been prepared via a facile and effective hydrothermal method by synthesizing Fe3O4 nanospheres on the planes of reduced graphene oxide（rGO）.Characterizations suggest the successful attachment of Fe3O4 nanospheres to rGO sheets.The rGO—Fe3O4composite（66.7 wt%of Fe3O4 in the composite） exhibits a stable capacity of 668 mAh g-1 without noticeable fading for up to 200 cycles in the voltage range of 0.001—3.0 V,and the superior performance of rGO-Fe3O4 is clearly established by comparison of the results with those from bare Fe3O4 nanospheres（capacity declined to 117 mAh g-1 only at the 200 th cycle）.The excellent electrochemical performance of rGO—Fe3O4 composite can be attributed to the fact that the uniform dispersion of the Fe3O4 nanospheres growing on the rGO sheets avoids aggregation during Li uptake-release cycling,which is desired for cycle stability.Meanwhile,the rGO sheets afford not only elastic buffer to alleviate the volume variations of Fe3O4nanospheres,but also good ionic and electronic transport medium in the electrode.展开更多
Ferromagnetic Fe3O4 nanoparticles were synthesized using water as the solvent through the sol-gel method, which was selected for its cost-effectiveness, simplicity, and eco-friendly nature. The synthesized nanoparticl...Ferromagnetic Fe3O4 nanoparticles were synthesized using water as the solvent through the sol-gel method, which was selected for its cost-effectiveness, simplicity, and eco-friendly nature. The synthesized nanoparticles were characterized using a variety of techniques, including Fourier Transform Infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA), and Vibrating Sample Magnetometer (VSM). These characterizations confirmed the successful formation of Fe3O4 nanoparticles. The FTIR spectra identified characteristic peaks corresponding to the functional groups present, and XRD analysis, using Scherer’s equation, determined an average crystalline size of 1.2 nm for the Fe3O4 nanoparticles. TGA results demonstrated the thermal stability of the nanoparticles, SEM imaging revealed distinct honeycomb-like structures for the nanoparticles synthesized with water as the solvent, while the VSM analysis was used to determine the magnetic behavior of the nanoparticles.展开更多
Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）,...Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）, laser Raman spectroscopy, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR） and X-ray absorption fine structure （XAFS） spectroscopy. Both XRD and Raman spectroscopy only detect the existence of Co3O4 crystallites in all catalysts. However, XPS results indicate that excess Co2＋ ions are present on the surface of Co3O4 in Co3O4（200）/Si02 as compared with bulk Co3O4. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co3O4 in Co3O4（200）/SiO2, and XAFS results demonstrate that Co3O4 in Co3O4（200）/SIO2 contains excess Co2＋. Increasing calcination temperature results in oxidation of excess Co2＋ and the decrease of the concentration of surface oxygen vacancies, consequently the for- mation of stoichiometric Co3O4 on supported catalysts. Among all Co3O4/SiO2 catalysts, Co3O4（200）/SiO2 exhibits the best catalytic performance towards CO oxidation, demonstrating that excess Co2＋ and surface oxygen vacancies can enhance the catalytic activity of Co3O4 towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silicasupported Co3O4 catalysts and highlight the important role of surface oxygen vacancies on Co3O4.展开更多
Peroxidase-like catalytic properties of Fe3O4 nanoparficles （NPs） with three different sizes, synthesized by chemical coprecipitation and sol-gel methods, were investigated by UV-vis spectrum analysis. By comparing ...Peroxidase-like catalytic properties of Fe3O4 nanoparficles （NPs） with three different sizes, synthesized by chemical coprecipitation and sol-gel methods, were investigated by UV-vis spectrum analysis. By comparing Fe3O4 NPs with average diameters of 11, 20, and 150 nm, we found that the catalytic activity increases with the reduced nanoparticle size. The electrochemical method to characterize the catalytic activity of Fe3O4 NPs using the response currents of the reaction product and substrate was also developed.展开更多
We prepared the Fe3O4/g‐C3N4nanoparticles(NPs)through a simple electrostatic self‐assembly method with a3:97weight ratio to investigate their Fenton,photo‐Fenton and oxidative functionalities besides photocatalytic...We prepared the Fe3O4/g‐C3N4nanoparticles(NPs)through a simple electrostatic self‐assembly method with a3:97weight ratio to investigate their Fenton,photo‐Fenton and oxidative functionalities besides photocatalytic functionality.We observed an improvement of the Fenton and photo‐Fenton activities of the Fe3O4/g‐C3N4nanocomposites.This improvement was attributed to efficient charge transfer between Fe3O4and g‐C3N4at the heterojunctions,inhibition of electron‐hole recombination,a high surface area,and stabilization of Fe3O4against leaching by the hydrophobic g‐C3N4.The obtained NPs showed a higher degradation potential for rhodamine B(RhB)dye than those of Fe3O4and g‐C3N4.As compared to photocatalysis,the efficiency of RhB degradation in the Fenton and photo‐Fenton reactions was increased by20%and90%,respectively.Additionally,the horseradish peroxidase(HRP)activity of the prepared nanomaterials was studied with3,3,5,5‐tetramethylbenzidinedihydrochloride(TMB)as a substrate.Dopamine oxidation was also examined.Results indicate that Fe3O4/g‐C3N4nanocomposites offers more efficient degradation of RhB dye in a photo‐Fenton system compared with regular photocatalytic degradation,which requires a long time.Our study also confirmed that Fe3O4/g‐C3N4nanocomposites can be used as a potential material for mimicking HRP owing to its high affinity for TMB.These findings suggest good potential for applications in biosensing and as a catalyst in oxidation reactions.展开更多
A series of Co3O4-CeO2 binary oxides with various Co/(Ce+Co)molar ratios were synthesized using a citric acid method,and their catalytic properties toward the total oxidation of propane were examined.The activities of...A series of Co3O4-CeO2 binary oxides with various Co/(Ce+Co)molar ratios were synthesized using a citric acid method,and their catalytic properties toward the total oxidation of propane were examined.The activities of the catalysts decrease in the order CoCeOx-70>CoCeOx-90>Co3O4>CoCeOx-50>CoCeOx-20>CeO2.CoCeOx-70(Co/(Ce+Co)=70% molar ratio)exhibits the highest catalytic activity toward the total oxidation of propane,of which the T90 is 310℃(GHSV=120000 mL h^-1 g^-1],which is 25℃ lower than that of pure Co3 O4.The enhancement of the catalytic performance of CoCeOx-70 is attributed to the strong interaction between CeO2 and Co3O4,the improvement of the low-temperature reducibility,and the increase in the number of active oxygen species.In-situ DRIFTS and reaction kinetics measurement reveal that Ce addition does not change the reaction mechanism,but promotes the adsorption and activation of propane on the catalyst surface.The addition of water vapor and CO2 in reactant gas has a negative effect on the propane conversion,and the catalyst is more sensitive to water vapor than to CO2.In addition,CoCeOx-70 exhibits excellent stability and reusability in water vapor and CO2 atmosphere.展开更多
The leaching kinetics of low grade zinc oxide ore in NH3-NH4Cl-H2O system was studied. The effects of ore particle size, reaction temperature and the sum concentration of ammonium ion and ammonia on the leaching effic...The leaching kinetics of low grade zinc oxide ore in NH3-NH4Cl-H2O system was studied. The effects of ore particle size, reaction temperature and the sum concentration of ammonium ion and ammonia on the leaching efficiency of zinc were examined. The leaching kinetics of low-grade zinc oxide ore in NH3-NH4Cl-H2O system follows the kinetic law of shrinking-core model. The results show that diffusion through the inert particle pores is the leaching kinetics rate controlling step. The calculated apparent activation energy of the process is about 7.057 kJ/mol. The leaching efficiency of zinc is 92.1% under the conditions of ore particle size of 69 μm, holding at 80 ℃ for 60 min, sum ammonia concentration of 7.5 mol/L, the molar ratio of ammonium to ammonia being 2-1, and the ratio (g/mL) of solid to liquid being 1-10.展开更多
Induration process of oxidized pellets involves the oxidation of Fe3O4 and re-crystallization of Fe2O3.The oxidation process of Fe3O4 is significant for pellets to obtain better ambient strength.Thus,the effect of MgO...Induration process of oxidized pellets involves the oxidation of Fe3O4 and re-crystallization of Fe2O3.The oxidation process of Fe3O4 is significant for pellets to obtain better ambient strength.Thus,the effect of MgO on oxidation process of Fe3O4 was investigated.The unreacted core model was applied to analyze the oxidizing induration process of pellets.The experimental results show that MgO plays a negative role in the oxidation process of Fe3O4.The oxidation rate of Fe3O4 in MgO-fluxed pellets（95.0% Fe3O4 ＋5.0% MgO）is slower than that in standard acid pellets（100% Fe3O4）.The relation between oxidation ratio of Fe3O4 and time was calculated based on the unreacted core model for both MgO-fluxed pellets and standard acid pellets.According to verification experiments,the values calculated by model coincide well with the experimental values.Therefore,the unreacted core model could be applied to describe the oxidizing induration process of pellets.展开更多
A series of CO3O4 spinel catalysts modified by Sm were prepared by co-precipitation method and tested for CH4 and CO oxidation. The addition of a small amount of Sm into Co3O4 led to an improvement in the catalytic ac...A series of CO3O4 spinel catalysts modified by Sm were prepared by co-precipitation method and tested for CH4 and CO oxidation. The addition of a small amount of Sm into Co3O4 led to an improvement in the catalytic activity for both reactions. Co0.98Sm0. 02 and Co0.95Sm0.05, the two samples with Co/Sm molar ratio of 0.98/0.02 and 0.95/0.05 in sequence, showed the similar and the highest activity for CH4 oxidation, with CH4 complete conversion at 450 ℃. In contrast, Coo.90Smo l0 was the most active sample for CO oxidation, with CO complete conversion at 120 ℃. The catalysts were characterized by techniques of N2 adsor- tion-desorption with Brunauer-Emmett-Teller technique （N2-BET）, X-ray powder diffraction （XRD）, thermal gravity analy- sis-differential scanning calorimetry （TGA-DSC）, Hz temperature programmed reduction （H2-TPR） and X-ray photoelectron spec- troscopy analysis （XPS）. Compared with pure Co3O4, for CO1-xSmx catalysts with 0.02≤x≤0.10, the addition of a small amount of Sm resulted in the formation of spinel Co3O4 and amorphous SmCoO3, hence increasing the number of Co3＋ and the active surface oxygen species, which was responsible for the improvement of the activity. C00.95Sm0.05 catalyst showed not only high thermal stability and activity but also good reaction durability in the presence of 5% water vapor for CH4 oxidation.展开更多
Fe（NO3）3-9H2O/Fe（HSO4）3 was used as an efficient reagent system for the oxidation of alcohols to their corresponding carbonyl compounds. All reactions were performed in the absence of solvent in good to high yield...Fe（NO3）3-9H2O/Fe（HSO4）3 was used as an efficient reagent system for the oxidation of alcohols to their corresponding carbonyl compounds. All reactions were performed in the absence of solvent in good to high yields. Under the same reaction conditions, thiols and sulfides were also converted to their corresponding disulfides and sulfoxides, respectively. 2007 Farhad Shirini. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
Advanced oxidation processes are widely applied to removal of persistent toxic substances from wastewater by hydroxyl radicals(·OH),which is generated from hydrogen peroxide(H2O2)decomposition.However,their pract...Advanced oxidation processes are widely applied to removal of persistent toxic substances from wastewater by hydroxyl radicals(·OH),which is generated from hydrogen peroxide(H2O2)decomposition.However,their practical applications have been hampered by many strict conditions,such as iron sludge,rigid pH condition,large doses of hydrogen peroxide and Fe^2+,etc.Herein,a magnetically recyclable Fe3O4@polydopamine(Fe3O4@PDA)coreshell nanocomposite was fabricated.As an excellent reducing agent,it can convert Fe^3+to Fe^2+.Combined with the coordination of polydopamine and ferric ions,the production of iron sludge is inhibited.The minimum concentration of hydrogen peroxide(0.2 mmol/L and Fe^2+(0.18 mmol/L))is 150-fold and 100-fold lower than that of previous reports,respectively.It also exhibits excellent degradation performance over a wide pH range from 3.0 to 9.0.Even after the tenth recycling,it still achieves over 99%degradation efficiency with the total organic carbon degradation rate of 80%,which is environmentally benign and has a large economic advantage.This discovery paves a way for extensive practical application of advanced oxidation processes,especially in environmental remediation.展开更多
The Ba-, La- and Ag-doped polycrystalline Ca2.9M0.1Co4O9 （M=Ca, Ba, La, Ag） thermoelectric bulk samples were pre- pared via citrate acid sol-gel synthesis method followed by spark plasma sintering technique. The bul...The Ba-, La- and Ag-doped polycrystalline Ca2.9M0.1Co4O9 （M=Ca, Ba, La, Ag） thermoelectric bulk samples were pre- pared via citrate acid sol-gel synthesis method followed by spark plasma sintering technique. The bulk samples were characterized and analyzed with regard to their phase compositions, grain orientations as well as microstructures. The high temperature thermoelec- tric transport properties of the bulk samples were studied in detail. All bulk samples were found to be single-phased with modified body texture. The electrical resistivity was modulated as a result of carrier concentration modification, however the carrier transport process was not influenced; the Seebeck coefficient was deteriorated simultaneously. The total thermal conductivity was remarkably reduced, on account of the decreasing of phonon thermal conductivity. The thermoelectric properties of the Ba-, La-, and Ag-doped bulk samples were optimized, and the Ba-doped Ca2.9Ba0.1Co4O9 system was found to have the highest dimensionless figure of merit ZT0.20 at 973 K, which was remarkably higher than that of the un-doped sample.展开更多
New cobalt-free composites consisting of Ba0.5Sr0.5Fe0.9Ni0.1O3-δ （BSFN） and Ce0.8Sm0.2O2-δ （SDC） were investigated as possible cathode materials for intermediate-temperature solid oxide fuel cell （IT-SOFC）. B...New cobalt-free composites consisting of Ba0.5Sr0.5Fe0.9Ni0.1O3-δ （BSFN） and Ce0.8Sm0.2O2-δ （SDC） were investigated as possible cathode materials for intermediate-temperature solid oxide fuel cell （IT-SOFC）. BSFN, which was synthesized by auto ignition process, was chemically compatible with SDC up to 1100 ℃ as indicated by X-ray diffraction analysis. The electrical conductivity of BSFN reached the maximum value of 57 S.cm-1 at 450 ℃. The thermal expansion coefficient （TEC） value of BSFN was 30.9×10-6 K-1, much higher than that of typical electrolytes. The electrochemical behavior of the composites was analyzed via electrochemical impedance spectroscopy with symmetrical cells BSFN-SDC/SDC/BSFN-SDC. The area specific interracial polarization resistance （ASR） decreased with increasing SDC content of the composite. The area specific interracial polarization resistance （ASR） at 700 ℃ is only 0.49, 0.34 and 0.31 Ω.cm2 when 30, 40, and 50 wt% SDC was cooperated to BSFN, respectively. These results suggest that BSFN-SDC is a possible candidate for IT-SOFC cathode.展开更多
基金supported by the Chinese Agriculture Research System(No.CARS-35-06B)111 Project(No.B17030)the Sichuan Science and Technology Program(No.2021ZDZX0012).
文摘Due to its high efficiency,Fe(Ⅱ)-based catalytic oxidation has been one of the most popular types of technology for treating growing organic pollutants.A lot of chemical Fe sludge alongwith various refractory pollutantswas concomitantly produced,whichmay cause secondary environmental problemswithout proper disposal.We here innovatively proposed an effective method of achieving zero Fe sludge,reusing Fe resources(Fe recovery=100%)and advancing organics removal(final TOC removal>70%)simultaneously,based on the in situ formation of magnetic Ca-Fe layered double hydroxide(Fe_(3)O_(4)@CaFe-LDH)nano-material.Cations(Ca^(2+)and Fe^(3+))concentration(≥30 mmol/L)and their molar ratio(Ca:Fe≥1.75)were crucial to the success of the method.Extrinsic nano Fe_(3)O_(4)was designed to be involved in the Fe(Ⅱ)-catalytic wastewater treatment process,and was modified by oxidation intermediates/products(especially those with COO-structure),which promoted the co-precipitation of Ca^(2+)(originated from Ca(OH)_(2)added after oxidation process)and byproduced Fe^(3+)cations on its surface to in situ generate core-shell Fe_(3)O_(4)@CaFe-LDH.The oxidation products were further removed during Fe_(3)O_(4)@CaFe-LDH material formation via intercalation and adsorption.Thismethodwas applicable to many kinds of organicwastewater,such as bisphenol A,methyl orange,humics,and biogas slurry.The prepared magnetic and hierarchical CaFe-LDH nanocomposite material showed comparable application performance to the recently reported CaFe-LDHs.This work provides a new strategy for efficiently enhancing the efficiency and economy of Fe(Ⅱ)-catalyzed oxidative wastewater treatment by producing high value-added LDHs materials.
基金supported by the National Natural Science Foundation of China (21373138)Shanghai Sci. & Tech. Committee (12JC1407200)Program for Changjiang Scholars and Innovative Research Team in University (IRT1269)
文摘An electrochemical biosensing platform was developed based on glucose oxidase(GOx)/Fe3O4-reduced graphene oxide(Fe3O4-RGO) nanosheets loaded on the magnetic glassy carbon electrode(MGCE).With the advantages of the magnetism, conductivity and biocompatibility of the Fe3O4-RGO nanosheets, the nanocomposites could be facilely adhered to the electrode surface by magnetically controllable assembling and beneficial to achieve the direct redox reactions and electrocatalytic behaviors of GOx immobilized into the nanocomposites. The biosensor exhibited good electrocatalytic activity, high sensitivity and stability. The current response is linear over glucose concentration ranging from 0.05 to 1.5 m M with a low detection limit of0.15 μM. Meanwhile, validation of the applicability of the biosensor was carried out by determining glucose in serum samples. The proposed protocol is simple, inexpensive and convenient, which shows great potential in biosensing application.
基金supported by the Beijing Municipal Science and Technology Project (No. Z181100005518007)the National Key Research and Development Program of China (No. 2017YFC0505303)+1 种基金the National Natural Science Foundation of China (Nos. 51978054 and 51678053)Beijing Municipal Education Commission through the Innovative Transdisciplinary Program ‘Ecological Restoration Engineering’ (No. GJJXK210102)。
文摘Bimetallic oxides composites have received an increasing attention as promising adsorbents for aqueous phosphate (P) removal in recent years. In this study, a novel magnetic composite MZLCO was prepared by hybridizing amorphous Zr-La (carbonate) oxides (ZLCO) with nano-FeOthrough a one-pot solvothermal method for efficient phosphate adsorption. Our optimum sample of MZLCO-45 exhibited a high Langmuir maximum adsorption capacity of 96.16 mg P/g and performed well even at low phosphate concentration. The phosphate adsorption kinetics by MZLCO-45 fitted well with the pseudo-second-order model, and the adsorption capacity could reach 79% of the ultimate value within the first 60 min. The phosphate adsorption process was highly p H-dependent, and MZLCO-45 performed well over a wide p H range of 2.0-8.0. Moreover, MZLCO-45 showed a strong selectivity to phosphate in the presence of competing ions (Cl^(-), NO_(3)^(-), SO_(4)^(2-), HCO_(3)^(-), Ca^(2+), and Mg^(2+)) and a good reusability using the eluent of Na OH/Na Cl mixture, then 64% adsorption capacity remained after ten recycles. The initial 2.0 mg P/L in municipal wastewater and surface water could be efficiently reduced to below 0.1mg P/L by 0.07 g/L MZLCO-45, and the phosphate removal efficiencies were 95.7% and 96.21%, respectively. Phosphate adsorption mechanisms by MZLCO-45 could be attributed to electrostatic attraction and the inner-sphere complexation via ligand exchange forming Zr/La-O-P, -OH and CO_(3)^(2-)groups on MZLCO-45 surface played important roles in the ligand exchange process. The existence of oxygen vacancies could accelerate the phosphate absorption rate of the MZLCO-45 composites.
基金supported by the National Basic Research Program of China(Grant Nos.2011CB932700 and 2011CB932703)the National Natural Science Foundation of China(Grant Nos.61335006,61378073,and 61077044)+1 种基金the Beijing Natural Science Foundation,China(Grant No.4132031)the Fundamental Research Funds for the Central Universities of Beijing Jiaotong University,China(Grant No.2014YJS136)
文摘In order to investigate the impedance matching properties of microwave absorbers,the ternary nanocomposites of GO/PANI/Fe3O4（GPF） are prepared via a two-step method,GO/PANI composites are synthesized by dilute polymerization in the presence of aniline monomer and GO,and GO/PANI/Fe3O4 is prepared via a co-precipitation method.The obtained nanocomposites are characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD）,and Fourier transform infrared spectroscopy（FTIR）,respectively.The microwave absorbability reveals enhanced microwave absorption properties compared with GO,PANI,and GO/PANI.The maximum reflection loss of GO/PANI/Fe3O4 is up to-27 dB at 14 GHz with its thickness being 2 mm,and its absorption bandwidths exceeding-10 dB are more than 11.2 GHz with its thickness values being in the range from 1.5 mm-4 mm.It provides that GO/PANI/Fe3O4 can be used as an attractive candidate for microwave absorbers.
文摘We describes a controllable synthesis procedure for growing a-Ee2O3 and Ee3O4 nanowires. High magnetic hematite a-Fe2O3 nanowires are successfully grown on Fe0.5Ni0.5 alloy substrates via an oxide assisted vapor-solid process. Experimental results also indicate that previous immersion of the substrates in a solution of oxalic acid causes the grown nanowires to convert gradually into magnetite （Fe3O4） nanowires. Additionally, the saturated state of Fe3O4 nanowires is achieved as the oxalic acid concentration reaches 0.75 mol/L. The average diameter and length of nanowires expands with an increasing operation temperature and the growth density of nanowires accumulates with an increasing gas flux in the vapor-solid process. The growth mechanism of a-Fe2O3 and Fe3O4 nanowires is also discussed. The results demonstrate that the entire synthesis of nanowires can be completed within 2 h.
基金supported by a grant from the Fundamental R&D Program for Core Technology of Materials (No.10051006)funded by the Ministry of Knowledge Economy, Republic of Koreasupported by the New & Renewable Energy Core Technology Program of the Korea Institute of Energy Technology Evaluation and Planning (KETEP), granted financial resource from the Ministry of Trade, Industry & Energy, Republic of Korea (No. 20113020030050)
文摘LaNi（0.6）Fe（0.4）O（3-δ） （LNF） powders were synthesized by the glycine-nitrate process and LNF-gadolinium-doped ceria （GDC） nanocomposite cathodes for solid oxide fuel cells （SOFCs） were fabricated by infiltration from LNF porous backbones. Electrochemical properties and Cr-poisoning behavior of LNF-GDC cathodes were studied. Single phase perovskite LNF could be obtained at the glycine to nitrate molar ratio of 1：1. The polarization resistance of the LNF-GDC nanocomposite cathode was significantly decreased in comparison with the LNF. This phenomenon was associated with enhanced catalytic activity and enlarged triple-phase boundary （TPB） length by GDC nano particles. In addition, the nanocomposite cathode showed good Cr tolerance under open circuit condition. The LNF-GDC nanocomposite cathodes were expected for use as a potential cathode in intermediate- temperature solid oxide fuel cells （IT-SOFC）.
基金supported by the Fundamental Research Funds for the Central Universities(FRF-SD-12-007A)the National Natural Science Foundation of China(No.21276023)
文摘Reduced graphene oxide-Fe3O4（rGO—Fe3O4） composite has been prepared via a facile and effective hydrothermal method by synthesizing Fe3O4 nanospheres on the planes of reduced graphene oxide（rGO）.Characterizations suggest the successful attachment of Fe3O4 nanospheres to rGO sheets.The rGO—Fe3O4composite（66.7 wt%of Fe3O4 in the composite） exhibits a stable capacity of 668 mAh g-1 without noticeable fading for up to 200 cycles in the voltage range of 0.001—3.0 V,and the superior performance of rGO-Fe3O4 is clearly established by comparison of the results with those from bare Fe3O4 nanospheres（capacity declined to 117 mAh g-1 only at the 200 th cycle）.The excellent electrochemical performance of rGO—Fe3O4 composite can be attributed to the fact that the uniform dispersion of the Fe3O4 nanospheres growing on the rGO sheets avoids aggregation during Li uptake-release cycling,which is desired for cycle stability.Meanwhile,the rGO sheets afford not only elastic buffer to alleviate the volume variations of Fe3O4nanospheres,but also good ionic and electronic transport medium in the electrode.
文摘Ferromagnetic Fe3O4 nanoparticles were synthesized using water as the solvent through the sol-gel method, which was selected for its cost-effectiveness, simplicity, and eco-friendly nature. The synthesized nanoparticles were characterized using a variety of techniques, including Fourier Transform Infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA), and Vibrating Sample Magnetometer (VSM). These characterizations confirmed the successful formation of Fe3O4 nanoparticles. The FTIR spectra identified characteristic peaks corresponding to the functional groups present, and XRD analysis, using Scherer’s equation, determined an average crystalline size of 1.2 nm for the Fe3O4 nanoparticles. TGA results demonstrated the thermal stability of the nanoparticles, SEM imaging revealed distinct honeycomb-like structures for the nanoparticles synthesized with water as the solvent, while the VSM analysis was used to determine the magnetic behavior of the nanoparticles.
文摘Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）, laser Raman spectroscopy, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR） and X-ray absorption fine structure （XAFS） spectroscopy. Both XRD and Raman spectroscopy only detect the existence of Co3O4 crystallites in all catalysts. However, XPS results indicate that excess Co2＋ ions are present on the surface of Co3O4 in Co3O4（200）/Si02 as compared with bulk Co3O4. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co3O4 in Co3O4（200）/SiO2, and XAFS results demonstrate that Co3O4 in Co3O4（200）/SIO2 contains excess Co2＋. Increasing calcination temperature results in oxidation of excess Co2＋ and the decrease of the concentration of surface oxygen vacancies, consequently the for- mation of stoichiometric Co3O4 on supported catalysts. Among all Co3O4/SiO2 catalysts, Co3O4（200）/SiO2 exhibits the best catalytic performance towards CO oxidation, demonstrating that excess Co2＋ and surface oxygen vacancies can enhance the catalytic activity of Co3O4 towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silicasupported Co3O4 catalysts and highlight the important role of surface oxygen vacancies on Co3O4.
基金This work was supported by the National Natural Science Foundation of China （Nos. 90406023 and 60571031）；National Important Science Research Program of China （Nos. 2006CB933206 and 2006CB705606）.
文摘Peroxidase-like catalytic properties of Fe3O4 nanoparficles （NPs） with three different sizes, synthesized by chemical coprecipitation and sol-gel methods, were investigated by UV-vis spectrum analysis. By comparing Fe3O4 NPs with average diameters of 11, 20, and 150 nm, we found that the catalytic activity increases with the reduced nanoparticle size. The electrochemical method to characterize the catalytic activity of Fe3O4 NPs using the response currents of the reaction product and substrate was also developed.
基金supported by the National Natural Science Foundation of China(51572253,21771171)Scientific Research Grant of Hefei Science Center of CAS(2015SRG-HSC048)+1 种基金cooperation between NSFC and Netherlands Organization for Scientific Research(51561135011)CAS-TWAS Scholarship Program~~
文摘We prepared the Fe3O4/g‐C3N4nanoparticles(NPs)through a simple electrostatic self‐assembly method with a3:97weight ratio to investigate their Fenton,photo‐Fenton and oxidative functionalities besides photocatalytic functionality.We observed an improvement of the Fenton and photo‐Fenton activities of the Fe3O4/g‐C3N4nanocomposites.This improvement was attributed to efficient charge transfer between Fe3O4and g‐C3N4at the heterojunctions,inhibition of electron‐hole recombination,a high surface area,and stabilization of Fe3O4against leaching by the hydrophobic g‐C3N4.The obtained NPs showed a higher degradation potential for rhodamine B(RhB)dye than those of Fe3O4and g‐C3N4.As compared to photocatalysis,the efficiency of RhB degradation in the Fenton and photo‐Fenton reactions was increased by20%and90%,respectively.Additionally,the horseradish peroxidase(HRP)activity of the prepared nanomaterials was studied with3,3,5,5‐tetramethylbenzidinedihydrochloride(TMB)as a substrate.Dopamine oxidation was also examined.Results indicate that Fe3O4/g‐C3N4nanocomposites offers more efficient degradation of RhB dye in a photo‐Fenton system compared with regular photocatalytic degradation,which requires a long time.Our study also confirmed that Fe3O4/g‐C3N4nanocomposites can be used as a potential material for mimicking HRP owing to its high affinity for TMB.These findings suggest good potential for applications in biosensing and as a catalyst in oxidation reactions.
基金supported by the National Key R&D Program of China(2016YFB0600305)~~
文摘A series of Co3O4-CeO2 binary oxides with various Co/(Ce+Co)molar ratios were synthesized using a citric acid method,and their catalytic properties toward the total oxidation of propane were examined.The activities of the catalysts decrease in the order CoCeOx-70>CoCeOx-90>Co3O4>CoCeOx-50>CoCeOx-20>CeO2.CoCeOx-70(Co/(Ce+Co)=70% molar ratio)exhibits the highest catalytic activity toward the total oxidation of propane,of which the T90 is 310℃(GHSV=120000 mL h^-1 g^-1],which is 25℃ lower than that of pure Co3 O4.The enhancement of the catalytic performance of CoCeOx-70 is attributed to the strong interaction between CeO2 and Co3O4,the improvement of the low-temperature reducibility,and the increase in the number of active oxygen species.In-situ DRIFTS and reaction kinetics measurement reveal that Ce addition does not change the reaction mechanism,but promotes the adsorption and activation of propane on the catalyst surface.The addition of water vapor and CO2 in reactant gas has a negative effect on the propane conversion,and the catalyst is more sensitive to water vapor than to CO2.In addition,CoCeOx-70 exhibits excellent stability and reusability in water vapor and CO2 atmosphere.
基金Project(2007CB613604) supported by the Major State Basic Research Development Program of ChinaProject(50674104) supported by the National Natural Science Foundation of ChinaProject(GJJ08279) supported by the Department of Education of Jiangxi Province
文摘The leaching kinetics of low grade zinc oxide ore in NH3-NH4Cl-H2O system was studied. The effects of ore particle size, reaction temperature and the sum concentration of ammonium ion and ammonia on the leaching efficiency of zinc were examined. The leaching kinetics of low-grade zinc oxide ore in NH3-NH4Cl-H2O system follows the kinetic law of shrinking-core model. The results show that diffusion through the inert particle pores is the leaching kinetics rate controlling step. The calculated apparent activation energy of the process is about 7.057 kJ/mol. The leaching efficiency of zinc is 92.1% under the conditions of ore particle size of 69 μm, holding at 80 ℃ for 60 min, sum ammonia concentration of 7.5 mol/L, the molar ratio of ammonium to ammonia being 2-1, and the ratio (g/mL) of solid to liquid being 1-10.
基金Item Sponsored by National Natural Science Foundation of China(51604069,U1508213,51404059)China Postdoctoral Science Foundation(2016M591445)+1 种基金Postdoctoral Science Foundation of NEU China(20160302)Fundamental Research Funds for Central Universities of China(N140204009)
文摘Induration process of oxidized pellets involves the oxidation of Fe3O4 and re-crystallization of Fe2O3.The oxidation process of Fe3O4 is significant for pellets to obtain better ambient strength.Thus,the effect of MgO on oxidation process of Fe3O4 was investigated.The unreacted core model was applied to analyze the oxidizing induration process of pellets.The experimental results show that MgO plays a negative role in the oxidation process of Fe3O4.The oxidation rate of Fe3O4 in MgO-fluxed pellets（95.0% Fe3O4 ＋5.0% MgO）is slower than that in standard acid pellets（100% Fe3O4）.The relation between oxidation ratio of Fe3O4 and time was calculated based on the unreacted core model for both MgO-fluxed pellets and standard acid pellets.According to verification experiments,the values calculated by model coincide well with the experimental values.Therefore,the unreacted core model could be applied to describe the oxidizing induration process of pellets.
基金supported by National Natural Science Foundation of China(21263015,21203088)Education Department of Jiangxi Province(GJJ12045)
文摘A series of CO3O4 spinel catalysts modified by Sm were prepared by co-precipitation method and tested for CH4 and CO oxidation. The addition of a small amount of Sm into Co3O4 led to an improvement in the catalytic activity for both reactions. Co0.98Sm0. 02 and Co0.95Sm0.05, the two samples with Co/Sm molar ratio of 0.98/0.02 and 0.95/0.05 in sequence, showed the similar and the highest activity for CH4 oxidation, with CH4 complete conversion at 450 ℃. In contrast, Coo.90Smo l0 was the most active sample for CO oxidation, with CO complete conversion at 120 ℃. The catalysts were characterized by techniques of N2 adsor- tion-desorption with Brunauer-Emmett-Teller technique （N2-BET）, X-ray powder diffraction （XRD）, thermal gravity analy- sis-differential scanning calorimetry （TGA-DSC）, Hz temperature programmed reduction （H2-TPR） and X-ray photoelectron spec- troscopy analysis （XPS）. Compared with pure Co3O4, for CO1-xSmx catalysts with 0.02≤x≤0.10, the addition of a small amount of Sm resulted in the formation of spinel Co3O4 and amorphous SmCoO3, hence increasing the number of Co3＋ and the active surface oxygen species, which was responsible for the improvement of the activity. C00.95Sm0.05 catalyst showed not only high thermal stability and activity but also good reaction durability in the presence of 5% water vapor for CH4 oxidation.
文摘Fe（NO3）3-9H2O/Fe（HSO4）3 was used as an efficient reagent system for the oxidation of alcohols to their corresponding carbonyl compounds. All reactions were performed in the absence of solvent in good to high yields. Under the same reaction conditions, thiols and sulfides were also converted to their corresponding disulfides and sulfoxides, respectively. 2007 Farhad Shirini. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金financial supports from the National Natural Science Foundation of China(No.51373137)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2017JQ2002)+3 种基金the International Cooperation Project of Shaanxi Province(No.2016KW-053)the Fundamental Research Funds for the Central Universities(No.3102018zy047)the Graduate Starting Seed Fund of Northwestern Polytechnical University(No.ZZ2018195)Shanghai space science and technology innovation fund。
文摘Advanced oxidation processes are widely applied to removal of persistent toxic substances from wastewater by hydroxyl radicals(·OH),which is generated from hydrogen peroxide(H2O2)decomposition.However,their practical applications have been hampered by many strict conditions,such as iron sludge,rigid pH condition,large doses of hydrogen peroxide and Fe^2+,etc.Herein,a magnetically recyclable Fe3O4@polydopamine(Fe3O4@PDA)coreshell nanocomposite was fabricated.As an excellent reducing agent,it can convert Fe^3+to Fe^2+.Combined with the coordination of polydopamine and ferric ions,the production of iron sludge is inhibited.The minimum concentration of hydrogen peroxide(0.2 mmol/L and Fe^2+(0.18 mmol/L))is 150-fold and 100-fold lower than that of previous reports,respectively.It also exhibits excellent degradation performance over a wide pH range from 3.0 to 9.0.Even after the tenth recycling,it still achieves over 99%degradation efficiency with the total organic carbon degradation rate of 80%,which is environmentally benign and has a large economic advantage.This discovery paves a way for extensive practical application of advanced oxidation processes,especially in environmental remediation.
基金Foundation item： Project supported by National Natural Science Foundation of China （50801002）, Beijing Municipal Natural Science Foundation （2112007） and the Education Department of Henan Province Science and Technology Research Projects （13B430895）
文摘The Ba-, La- and Ag-doped polycrystalline Ca2.9M0.1Co4O9 （M=Ca, Ba, La, Ag） thermoelectric bulk samples were pre- pared via citrate acid sol-gel synthesis method followed by spark plasma sintering technique. The bulk samples were characterized and analyzed with regard to their phase compositions, grain orientations as well as microstructures. The high temperature thermoelec- tric transport properties of the bulk samples were studied in detail. All bulk samples were found to be single-phased with modified body texture. The electrical resistivity was modulated as a result of carrier concentration modification, however the carrier transport process was not influenced; the Seebeck coefficient was deteriorated simultaneously. The total thermal conductivity was remarkably reduced, on account of the decreasing of phonon thermal conductivity. The thermoelectric properties of the Ba-, La-, and Ag-doped bulk samples were optimized, and the Ba-doped Ca2.9Ba0.1Co4O9 system was found to have the highest dimensionless figure of merit ZT0.20 at 973 K, which was remarkably higher than that of the un-doped sample.
文摘New cobalt-free composites consisting of Ba0.5Sr0.5Fe0.9Ni0.1O3-δ （BSFN） and Ce0.8Sm0.2O2-δ （SDC） were investigated as possible cathode materials for intermediate-temperature solid oxide fuel cell （IT-SOFC）. BSFN, which was synthesized by auto ignition process, was chemically compatible with SDC up to 1100 ℃ as indicated by X-ray diffraction analysis. The electrical conductivity of BSFN reached the maximum value of 57 S.cm-1 at 450 ℃. The thermal expansion coefficient （TEC） value of BSFN was 30.9×10-6 K-1, much higher than that of typical electrolytes. The electrochemical behavior of the composites was analyzed via electrochemical impedance spectroscopy with symmetrical cells BSFN-SDC/SDC/BSFN-SDC. The area specific interracial polarization resistance （ASR） decreased with increasing SDC content of the composite. The area specific interracial polarization resistance （ASR） at 700 ℃ is only 0.49, 0.34 and 0.31 Ω.cm2 when 30, 40, and 50 wt% SDC was cooperated to BSFN, respectively. These results suggest that BSFN-SDC is a possible candidate for IT-SOFC cathode.
