At the late stage of solidification with ultrasonic treatment （UST） in Al-Si alloys, a part of semisolid overflows and climbs along the probe. The interesting phenomenon and its influence on the solidification micro...At the late stage of solidification with ultrasonic treatment （UST） in Al-Si alloys, a part of semisolid overflows and climbs along the probe. The interesting phenomenon and its influence on the solidification microstructure were investigated in order to better study the mechanism of UST. It is considered that the overflowing phenomenon occurs due to the changes of vibration and flow in the remaining semisolid. Because the overflowed portion comes from the region with intense UST effect and vibrates with the probe during solidification, great modification of primary and euteetic Si （about 10 pm in length） and refinement of primary a（Al） （about 70 μm in size） are observed in this portion.展开更多
This paper proposes a channel allocation scheme for multimedia wireless networks,in which a twolayer macro-cell or micro-cell architecture is considered.Macro-cells are used to access high-mobility services;while micr...This paper proposes a channel allocation scheme for multimedia wireless networks,in which a twolayer macro-cell or micro-cell architecture is considered.Macro-cells are used to access high-mobility services;while micro-cells,which are overlaid by the macro-cells,are used to cater low-mobility services.To analyze the scheme,a multidimensional Markov traffic model is firstly developed,in which traffic characteristic of two special periods of time is considered.And then,a pre-emptive channel-borrowing scheme combined with trafficoverflowing strategy for multimedia(voice,video or data) networks is proposed,in which handoff requests can not only borrow channels from adjacent homogenous cells,but also be overflowed to heterogeneous cells.Priority strategies are also dedicated to high-mobility services for they can pre-empt channels being used by low-mobility services in macro-cells.To meet the high quality of service(QoS) requirements of video services and increase the channel utilization ratio,video services can be transformed between real-time services and non-real-time services as necessary.Simulation results show that our schemes can decrease the blocking probabilities and improve the channel utilization.展开更多
Emerging contaminants(ECs)have raised global concern due to their adverse effect on ecosystems and human health.However,the occurrence and transport of ECs in stormwater remain unclear.The impact of ECs from stormwate...Emerging contaminants(ECs)have raised global concern due to their adverse effect on ecosystems and human health.However,the occurrence and transport of ECs in stormwater remain unclear.The impact of ECs from stormwater on surface water quality and ecosystem health is also poorly documented.In this review,we examined the variations in EC concentrations in surface water resulting from stormwater.During the wet weather,the concentrations of most investigated ECs,e.g.,microplastics,per-and polyfluoroalkyl substances,and vehicle-related compounds,significantly increase in surface water,indicating that stormwater may be a critical source of these contaminants.Furthermore,the potential pathways of ECs from stormwater enter surface water are outlined.Studies demonstrate that surface runoff and combined sewer overflows are important pathways for ECs,with discharges comparable to or exceeding those from wastewater treatment plants.Illicit connection also plays an important part in elevated EC concentrations in surface water.Overall,our findings underscore the importance of stormwater as a source for ECs in surface waters,and urge for increased emphasis on,and reinforcement of,stormwater monitoring and control measures to minimize the transport of ECs into receiving water bodies.展开更多
The author affiliation and the funding information in the Acknowledgement section of the online version of the original article was revised.One affiliation(the 8th affiliation)of the first author is added.The Acknowle...The author affiliation and the funding information in the Acknowledgement section of the online version of the original article was revised.One affiliation(the 8th affiliation)of the first author is added.The Acknowledgement section of the original article has been revised to:Acknowledgments:This research was funded by the National University of Mongolia under grant agreement P2023(grant number P2023-4578)and supported by the Chey Institute for Advanced Studies“International Scholarship Exchange Fellowship for the academic year of 2024-2025”,Republic of Korea,and the National University of Mongolia.We would like to acknowledge the National University of Mongolia and Soumik Das from the Center for the Study of Regional Development,Jawaharlal Nehru University,New Delhi-110067,for his valuable assistance in preparing the geological maps.展开更多
Climate change is accelerating globally,raising significant concerns regarding the environmental risks associated with combined sewer overflows(CSOs).These rainfall events lead to the excessive discharge of multiple p...Climate change is accelerating globally,raising significant concerns regarding the environmental risks associated with combined sewer overflows(CSOs).These rainfall events lead to the excessive discharge of multiple pollutants into natural waters.However,greenhouse gas(GHG)emissions from CSOs,which are crucial for carbon neutrality in urban water systems,remain fragmented.Using the life-cycle assess-ment method expansion approach,this study breaks down the formation and discharge processes of CSOs and uncovers the underlying mechanisms driving GHG emissions during each period.Given the complex-ity and uncertainty in the spatial distribution of GHG emissions from CSOs,the development of standard monitoring and estimation methods is vital.This study identifies the factors influencing GHG emissions within the urban drainage system(UDS)and defines the interactive GHG emission boundaries and accounting framework related to CSOs.This framework is expanded to consider the hybrid nature of urban engineering and hydraulic interactions during the CSO events.Advanced modeling technologies have emerged as essential tools for predicting and managing GHG emissions from CSOs.This review pro-motes comprehensive data-driven methods for predicting GHG emissions from CSOs,fully considering the inherent heterogeneity of CSOs and the impact of multi-source contaminants discharged into aquatic environments.It emphasizes refining emission boundary definitions,novel accounting practices adapting data-driven methods,and comprehensive management strategies in line with the move toward carbon neutrality in the UDS.It advocates the adoption of solutions including advanced technologies and artifi-cial intelligent methods to mitigate CSO-related GHG emissions,stressing the significance of integrating low-carbon solutions and a comprehensive data-driven management framework in future research directions.展开更多
In the winter of 2017,southern France was hit by the most severe freeze in a decade,and yet the southern city of Gaiaque,with a population of just 10,000,had 250,000 visitors in town.What attracted them to brave the c...In the winter of 2017,southern France was hit by the most severe freeze in a decade,and yet the southern city of Gaiaque,with a population of just 10,000,had 250,000 visitors in town.What attracted them to brave the cold and rain to visit the small city?A Chinese lantern festival,the first kind of it in France.The lantern festival,jointly展开更多
During long-term operation,the performance of obstacles would be changed due to the material accumulating upslope the obstacle.However,the effects of retained material on impact,overflow and landing dynamics of granul...During long-term operation,the performance of obstacles would be changed due to the material accumulating upslope the obstacle.However,the effects of retained material on impact,overflow and landing dynamics of granular flow have not yet been elucidated.To address this gap,physical flume tests and discrete element simulations are conducted considering a range of normalized deposition height h0/H from 0 to 1,where h0 and H represent the deposition height and obstacle height,respectively.An analytical model is modified to evaluate the flow velocity and flow depth after interacting with the retained materials,which further serve to calculate the peak impact force on the obstacle.Notably,the computed impact forces successfully predict the experimental results when a≥25°.In addition,the results indicate that a higher h0/H leads to a lower dynamic impact force,a greater landing distance L,and a larger landing coefficient Cr,where Cr is the ratio of slope-parallel component of landing velocity to flow velocity just before landing.Compared to the existing overflow model,the measured landing distance L is underestimated by up to 30%,and therefore it is insufficient for obstacle design when there is retained material.Moreover,the recommended Cr in current design practice is found to be nonconservative for estimating the landing velocity of geophysical flow.This study provides insightful scientific basis for designing obstacles with deposition.展开更多
Currently,deep drilling operates under extreme conditions of high temperature and high pressure,demanding more from subterranean power motors.The all-metal positive displacement motor,known for its robust performance,...Currently,deep drilling operates under extreme conditions of high temperature and high pressure,demanding more from subterranean power motors.The all-metal positive displacement motor,known for its robust performance,is a critical choice for such drilling.The dimensions of the PDM are crucial for its performance output.To enhance this,optimization of the motor's profile using a genetic algorithm has been undertaken.The design process begins with the computation of the initial stator and rotor curves based on the equations for a screw cycloid.These curves are then refined using the least squares method for a precise fit.Following this,the PDM's mathematical model is optimized,and motor friction is assessed.The genetic algorithm process involves encoding variations and managing crossovers to optimize objective functions,including the isometric radius coefficient,eccentricity distance parameter,overflow area,and maximum slip speed.This optimization yields the ideal profile parameters that enhance the motor's output.Comparative analyses of the initial and optimized output characteristics were conducted,focusing on the effects of the isometric radius coefficient and overflow area on the motor's performance.Results indicate that the optimized motor's overflow area increased by 6.9%,while its rotational speed reduced by 6.58%.The torque,as tested by Infocus,saw substantial improvements of38.8%.This optimization provides a theoretical foundation for improving the output characteristics of allmetal PDMs and supports the ongoing development and research of PDM technology.展开更多
In the context of global climate change,the impact of group-occurring ocean dynamic disasters on China's offshore areas is becoming more and more intense.The study of the effect of existing ocean dynamic disasters...In the context of global climate change,the impact of group-occurring ocean dynamic disasters on China's offshore areas is becoming more and more intense.The study of the effect of existing ocean dynamic disasters on offshore hazard-bearing bodies mostly focuses on the effect of single disaster-causing factors,and it is still insufficient to study storm surge and dynamic wave coupling&reinforcement effects as well as the process of the dynamic response of such hazard-bearing bodies as seawalls.This study firstly realized the synchronous process of water level and wave through continuous tide generation and wave generation by the wave maker and tide generating device,so as to realize the dynamic coupling simulation of storm surge and wave in the laboratory.Then the physical model test of the typical seawall section was carried out under the dynamic coupling of storm surge and wave as well as at a conventional fixed water level respectively.In the process of test wave overtopping discharge and the damage process of the levee crown and backwall of seawalls were observed and compared,and their damage mechanism was also studied.展开更多
Storm surge inundation is a major concern in marine hazard risk assessment during extreme weather conditions.In this study,a high-resolution coupled model(the ADVanced CIRCulation model+the Simulating WAves Nearshore ...Storm surge inundation is a major concern in marine hazard risk assessment during extreme weather conditions.In this study,a high-resolution coupled model(the ADVanced CIRCulation model+the Simulating WAves Nearshore model)was used to investigate the storm surge inundation in the southwestern Hangzhou Bay region during Typhoon Chan-hom in 2015.The simulated hydrodynamic processes(sea surface wave and storm tide)were validated with measured data from wave buoys and tide gauges,indicating that the overall performance of the model was satisfactory.The storm surge inundation in the coastal area was simulated for several idealized control experiments,including different wave effects(wave-enhanced wind stress,wave-enhanced bottom stress,and wave radiation stress).Dike overflowing cases with different dike heights and dike breaking cases with different dike breach lengths were considered in the simulation.The results highlight the necessity of incorporating wave effects in the accurate simulation of storm surge inundation.Dike height significantly influences the magnitude and phase of the maximum inundation area in the dike overflowing cases,and dike breach length is an important factor impacting the magnitude of the maximum inundation area in the dike breaking cases.This study may serve as a useful reference for accurate coastal inundation simulation and risk assessment.展开更多
A new variable time step method,which is called the backwards calculating time step method,is presented in this paper.It allows numerical simulation of soil freezing and thawing while avoiding "phase change missi...A new variable time step method,which is called the backwards calculating time step method,is presented in this paper.It allows numerical simulation of soil freezing and thawing while avoiding "phase change missing and overflowing".A sensitive heat capacity model is introduced through which the calculation errors are analyzed.Then the equation using the self-adjusted time step is presented and solved using finite differences.Through this equation,the time needed for a space cell to reach the phase change point temperature is calculated.Using this time allows the time step to be adjusted so that errors caused by "phase change missing and overflowing" are successfully eliminated.Above all,the obvious features of this method are an accelerated rate for adjusting the time step and simplifing the computations.An actual example proves that this method can accurately calculate the temperature fields during soil freezing and thawing.It is an improvement over traditional methods and can be widely used on complicated multi-dimensional phase change problems.展开更多
The simulation of hydrodynamic deep drawing by means of FEM is an efficient method that can relieve experimental burden and find the optimum process parameters. Some problems such as mathematical description of cavity...The simulation of hydrodynamic deep drawing by means of FEM is an efficient method that can relieve experimental burden and find the optimum process parameters. Some problems such as mathematical description of cavity liquid flow pressure must be solved firstly. A math formula about hydrodynamic flow pressure that can be applied in general FEM software was proposed, and good results were gained. It was proved that the theoretical results keep coincident with experimental results.[展开更多
A channel allocation scheme for hierarchical wireless networks was proposed in terms of the connection-level quality of service. The channel allocation scheme was analyzed using both horizontal channel borrowing and v...A channel allocation scheme for hierarchical wireless networks was proposed in terms of the connection-level quality of service. The channel allocation scheme was analyzed using both horizontal channel borrowing and vertical traffic overflowing. Pre-emptive priority strategies are used to classify real-time services and non-real-time services, real-time service is given higher priority for it is allowed to pre-empt channels used by non-real-time service. Some channel borrowing thresholds and acceptance ratios are used to avoid channel locking or dynamic power control, which can also be dynamically adjusted according to network load. Simulation results show that the proposed schemes can improve the system performance.展开更多
A simplified integer overflow detection method based on path relaxation is described for avoiding buffer overflow triggered by integer overflow. When the integer overflow refers to the size of the buffer allocated dyn...A simplified integer overflow detection method based on path relaxation is described for avoiding buffer overflow triggered by integer overflow. When the integer overflow refers to the size of the buffer allocated dynamically, this kind of integer overflow is most likely to trigger buffer overflow. Based on this discovery, through lightly static program analysis, the solution traces the key variables referring to the size of a buffer allocated dynamically and it maintains the upper bound and lower bound of these variables. After the constraint information of these traced variables is inserted into the original program, this method tests the program with test cases through path relaxation, which means that it not only reports the errors revealed by the current runtime value of traced variables contained in the test case, but it also examines the errors possibly occurring under the same execution path with all the possible values of the traced variables. The effectiveness of this method is demonstrated in a case study. Compared with the traditional buffer overflow detection methods, this method reduces the burden of detection and improves efficiency.展开更多
基金Project(50874022)supported by the National Natural Science Foundation of China
文摘At the late stage of solidification with ultrasonic treatment （UST） in Al-Si alloys, a part of semisolid overflows and climbs along the probe. The interesting phenomenon and its influence on the solidification microstructure were investigated in order to better study the mechanism of UST. It is considered that the overflowing phenomenon occurs due to the changes of vibration and flow in the remaining semisolid. Because the overflowed portion comes from the region with intense UST effect and vibrates with the probe during solidification, great modification of primary and euteetic Si （about 10 pm in length） and refinement of primary a（Al） （about 70 μm in size） are observed in this portion.
基金the National Natural Science Foundation of China (No.60802058)the Leading Academic Discipline Project of Shanghai Municipal Education Commission (No.J51801)
文摘This paper proposes a channel allocation scheme for multimedia wireless networks,in which a twolayer macro-cell or micro-cell architecture is considered.Macro-cells are used to access high-mobility services;while micro-cells,which are overlaid by the macro-cells,are used to cater low-mobility services.To analyze the scheme,a multidimensional Markov traffic model is firstly developed,in which traffic characteristic of two special periods of time is considered.And then,a pre-emptive channel-borrowing scheme combined with trafficoverflowing strategy for multimedia(voice,video or data) networks is proposed,in which handoff requests can not only borrow channels from adjacent homogenous cells,but also be overflowed to heterogeneous cells.Priority strategies are also dedicated to high-mobility services for they can pre-empt channels being used by low-mobility services in macro-cells.To meet the high quality of service(QoS) requirements of video services and increase the channel utilization ratio,video services can be transformed between real-time services and non-real-time services as necessary.Simulation results show that our schemes can decrease the blocking probabilities and improve the channel utilization.
基金supported by the National Natural Science Foundation of China(Nos.52325001 and 52170009)the National Key Research and Development Program of China(No.2021YFC3200700)the Programof Shanghai Academic Research Leader,China(No.21XD1424000).
文摘Emerging contaminants(ECs)have raised global concern due to their adverse effect on ecosystems and human health.However,the occurrence and transport of ECs in stormwater remain unclear.The impact of ECs from stormwater on surface water quality and ecosystem health is also poorly documented.In this review,we examined the variations in EC concentrations in surface water resulting from stormwater.During the wet weather,the concentrations of most investigated ECs,e.g.,microplastics,per-and polyfluoroalkyl substances,and vehicle-related compounds,significantly increase in surface water,indicating that stormwater may be a critical source of these contaminants.Furthermore,the potential pathways of ECs from stormwater enter surface water are outlined.Studies demonstrate that surface runoff and combined sewer overflows are important pathways for ECs,with discharges comparable to or exceeding those from wastewater treatment plants.Illicit connection also plays an important part in elevated EC concentrations in surface water.Overall,our findings underscore the importance of stormwater as a source for ECs in surface waters,and urge for increased emphasis on,and reinforcement of,stormwater monitoring and control measures to minimize the transport of ECs into receiving water bodies.
文摘The author affiliation and the funding information in the Acknowledgement section of the online version of the original article was revised.One affiliation(the 8th affiliation)of the first author is added.The Acknowledgement section of the original article has been revised to:Acknowledgments:This research was funded by the National University of Mongolia under grant agreement P2023(grant number P2023-4578)and supported by the Chey Institute for Advanced Studies“International Scholarship Exchange Fellowship for the academic year of 2024-2025”,Republic of Korea,and the National University of Mongolia.We would like to acknowledge the National University of Mongolia and Soumik Das from the Center for the Study of Regional Development,Jawaharlal Nehru University,New Delhi-110067,for his valuable assistance in preparing the geological maps.
基金supported by the National Natural Science Foun-dation of China(52325001,52170009,and 52400114)the National Key Research and Development Program of China(2021YFC3200700 and 2021YFC3200702)+1 种基金the Program of Shanghai Academic Research Leader,China(21XD1424000)the Fundamental Research Funds for the Central Universities.
文摘Climate change is accelerating globally,raising significant concerns regarding the environmental risks associated with combined sewer overflows(CSOs).These rainfall events lead to the excessive discharge of multiple pollutants into natural waters.However,greenhouse gas(GHG)emissions from CSOs,which are crucial for carbon neutrality in urban water systems,remain fragmented.Using the life-cycle assess-ment method expansion approach,this study breaks down the formation and discharge processes of CSOs and uncovers the underlying mechanisms driving GHG emissions during each period.Given the complex-ity and uncertainty in the spatial distribution of GHG emissions from CSOs,the development of standard monitoring and estimation methods is vital.This study identifies the factors influencing GHG emissions within the urban drainage system(UDS)and defines the interactive GHG emission boundaries and accounting framework related to CSOs.This framework is expanded to consider the hybrid nature of urban engineering and hydraulic interactions during the CSO events.Advanced modeling technologies have emerged as essential tools for predicting and managing GHG emissions from CSOs.This review pro-motes comprehensive data-driven methods for predicting GHG emissions from CSOs,fully considering the inherent heterogeneity of CSOs and the impact of multi-source contaminants discharged into aquatic environments.It emphasizes refining emission boundary definitions,novel accounting practices adapting data-driven methods,and comprehensive management strategies in line with the move toward carbon neutrality in the UDS.It advocates the adoption of solutions including advanced technologies and artifi-cial intelligent methods to mitigate CSO-related GHG emissions,stressing the significance of integrating low-carbon solutions and a comprehensive data-driven management framework in future research directions.
文摘In the winter of 2017,southern France was hit by the most severe freeze in a decade,and yet the southern city of Gaiaque,with a population of just 10,000,had 250,000 visitors in town.What attracted them to brave the cold and rain to visit the small city?A Chinese lantern festival,the first kind of it in France.The lantern festival,jointly
基金funded by the National Natural Science Foundation of China(Grant Nos.42120104002,41941019)the Research Grants Council of the Hong Kong Special Administrative Region,China(Grant No.AoE/E-603/18).
文摘During long-term operation,the performance of obstacles would be changed due to the material accumulating upslope the obstacle.However,the effects of retained material on impact,overflow and landing dynamics of granular flow have not yet been elucidated.To address this gap,physical flume tests and discrete element simulations are conducted considering a range of normalized deposition height h0/H from 0 to 1,where h0 and H represent the deposition height and obstacle height,respectively.An analytical model is modified to evaluate the flow velocity and flow depth after interacting with the retained materials,which further serve to calculate the peak impact force on the obstacle.Notably,the computed impact forces successfully predict the experimental results when a≥25°.In addition,the results indicate that a higher h0/H leads to a lower dynamic impact force,a greater landing distance L,and a larger landing coefficient Cr,where Cr is the ratio of slope-parallel component of landing velocity to flow velocity just before landing.Compared to the existing overflow model,the measured landing distance L is underestimated by up to 30%,and therefore it is insufficient for obstacle design when there is retained material.Moreover,the recommended Cr in current design practice is found to be nonconservative for estimating the landing velocity of geophysical flow.This study provides insightful scientific basis for designing obstacles with deposition.
基金supported by the National Natural Science Foundation of China (No.42172343)。
文摘Currently,deep drilling operates under extreme conditions of high temperature and high pressure,demanding more from subterranean power motors.The all-metal positive displacement motor,known for its robust performance,is a critical choice for such drilling.The dimensions of the PDM are crucial for its performance output.To enhance this,optimization of the motor's profile using a genetic algorithm has been undertaken.The design process begins with the computation of the initial stator and rotor curves based on the equations for a screw cycloid.These curves are then refined using the least squares method for a precise fit.Following this,the PDM's mathematical model is optimized,and motor friction is assessed.The genetic algorithm process involves encoding variations and managing crossovers to optimize objective functions,including the isometric radius coefficient,eccentricity distance parameter,overflow area,and maximum slip speed.This optimization yields the ideal profile parameters that enhance the motor's output.Comparative analyses of the initial and optimized output characteristics were conducted,focusing on the effects of the isometric radius coefficient and overflow area on the motor's performance.Results indicate that the optimized motor's overflow area increased by 6.9%,while its rotational speed reduced by 6.58%.The torque,as tested by Infocus,saw substantial improvements of38.8%.This optimization provides a theoretical foundation for improving the output characteristics of allmetal PDMs and supports the ongoing development and research of PDM technology.
基金Supported by the National Key R&D Program of China(No.2016YFC1402002)the Fifteenth Session Program between China and Bulgaria Scientific and Technological Cooperation Committee(No.15-13)the Major Project of Nanjing Hydraulic Research Institute Funds(Nos.Y218005,Y218006)
文摘In the context of global climate change,the impact of group-occurring ocean dynamic disasters on China's offshore areas is becoming more and more intense.The study of the effect of existing ocean dynamic disasters on offshore hazard-bearing bodies mostly focuses on the effect of single disaster-causing factors,and it is still insufficient to study storm surge and dynamic wave coupling&reinforcement effects as well as the process of the dynamic response of such hazard-bearing bodies as seawalls.This study firstly realized the synchronous process of water level and wave through continuous tide generation and wave generation by the wave maker and tide generating device,so as to realize the dynamic coupling simulation of storm surge and wave in the laboratory.Then the physical model test of the typical seawall section was carried out under the dynamic coupling of storm surge and wave as well as at a conventional fixed water level respectively.In the process of test wave overtopping discharge and the damage process of the levee crown and backwall of seawalls were observed and compared,and their damage mechanism was also studied.
基金supported by the National Key Research and Development Program of China(Nos.2016YFC140 2000,2016YFC1401002,and 2018YFC1407003)the National Natural Science Foundation of China(NSFC)(NosU1706216,41606024,and 41506023)+3 种基金the CAS(Chinese Academy of Sciences)Strategic Priority Project(No.XDA 19060202)the CAS Innovative Foundation(No.CXJJ-16M111)the NSFC Innovative Group(No.41421005)the NSFC-Shandong Joint Fund for Marine Science Research Centers(No.U1406402)
文摘Storm surge inundation is a major concern in marine hazard risk assessment during extreme weather conditions.In this study,a high-resolution coupled model(the ADVanced CIRCulation model+the Simulating WAves Nearshore model)was used to investigate the storm surge inundation in the southwestern Hangzhou Bay region during Typhoon Chan-hom in 2015.The simulated hydrodynamic processes(sea surface wave and storm tide)were validated with measured data from wave buoys and tide gauges,indicating that the overall performance of the model was satisfactory.The storm surge inundation in the coastal area was simulated for several idealized control experiments,including different wave effects(wave-enhanced wind stress,wave-enhanced bottom stress,and wave radiation stress).Dike overflowing cases with different dike heights and dike breaking cases with different dike breach lengths were considered in the simulation.The results highlight the necessity of incorporating wave effects in the accurate simulation of storm surge inundation.Dike height significantly influences the magnitude and phase of the maximum inundation area in the dike overflowing cases,and dike breach length is an important factor impacting the magnitude of the maximum inundation area in the dike breaking cases.This study may serve as a useful reference for accurate coastal inundation simulation and risk assessment.
基金Project 2006G1662-00 supported by the Key Science and Technology Project of Heilongjiang Province
文摘A new variable time step method,which is called the backwards calculating time step method,is presented in this paper.It allows numerical simulation of soil freezing and thawing while avoiding "phase change missing and overflowing".A sensitive heat capacity model is introduced through which the calculation errors are analyzed.Then the equation using the self-adjusted time step is presented and solved using finite differences.Through this equation,the time needed for a space cell to reach the phase change point temperature is calculated.Using this time allows the time step to be adjusted so that errors caused by "phase change missing and overflowing" are successfully eliminated.Above all,the obvious features of this method are an accelerated rate for adjusting the time step and simplifing the computations.An actual example proves that this method can accurately calculate the temperature fields during soil freezing and thawing.It is an improvement over traditional methods and can be widely used on complicated multi-dimensional phase change problems.
文摘The simulation of hydrodynamic deep drawing by means of FEM is an efficient method that can relieve experimental burden and find the optimum process parameters. Some problems such as mathematical description of cavity liquid flow pressure must be solved firstly. A math formula about hydrodynamic flow pressure that can be applied in general FEM software was proposed, and good results were gained. It was proved that the theoretical results keep coincident with experimental results.[
基金The National Natural Science Foundation of China (No. 60372076)
文摘A channel allocation scheme for hierarchical wireless networks was proposed in terms of the connection-level quality of service. The channel allocation scheme was analyzed using both horizontal channel borrowing and vertical traffic overflowing. Pre-emptive priority strategies are used to classify real-time services and non-real-time services, real-time service is given higher priority for it is allowed to pre-empt channels used by non-real-time service. Some channel borrowing thresholds and acceptance ratios are used to avoid channel locking or dynamic power control, which can also be dynamically adjusted according to network load. Simulation results show that the proposed schemes can improve the system performance.
基金The National Natural Science Foundation of China (No.60873050,60703086)the Opening Foundation of State Key Laboratory of Software Engineering in Wuhan University (No.SKLSE20080717)
文摘A simplified integer overflow detection method based on path relaxation is described for avoiding buffer overflow triggered by integer overflow. When the integer overflow refers to the size of the buffer allocated dynamically, this kind of integer overflow is most likely to trigger buffer overflow. Based on this discovery, through lightly static program analysis, the solution traces the key variables referring to the size of a buffer allocated dynamically and it maintains the upper bound and lower bound of these variables. After the constraint information of these traced variables is inserted into the original program, this method tests the program with test cases through path relaxation, which means that it not only reports the errors revealed by the current runtime value of traced variables contained in the test case, but it also examines the errors possibly occurring under the same execution path with all the possible values of the traced variables. The effectiveness of this method is demonstrated in a case study. Compared with the traditional buffer overflow detection methods, this method reduces the burden of detection and improves efficiency.
