From 10 to 15 April 2025,China experienced a rare persistent extreme wind-dust compound disaster that swept from north to south.Based on observational data,historical disaster records,and situations of various exposed...From 10 to 15 April 2025,China experienced a rare persistent extreme wind-dust compound disaster that swept from north to south.Based on observational data,historical disaster records,and situations of various exposed elements,this study analyzed the formation mechanisms and evolution of this extreme event and conducted a rapid assessment of the associated loss and damage.The results indicate that the direct cause of this extreme wind-dust compound disaster was a strong cold vortex system generated in Mongolia,which moved eastward and southward,combined with the amplification effects of topography and urban structures,and the downward transmission of momentum from higher troposphere.The analysis revealed that approximately 697.47 million people were exposed to strong winds,while about 1,374.54 million people were exposed to high concentrations of PM10.The strong winds also caused varying degrees of damage to buildings,transportation networks,agricultural greenhouses,and forests.Based on vulnerability curves for wind-related loss and damage,it was estimated that the number of victims affected by this extreme wind-dust compound disaster ranged from 0.209 to 1.044 million,with casualties between 5 and 13 individuals.The number of damaged buildings was estimated to be between 2115 and 4607,and the area of affected crops was between 229 and 783 km2.The direct economic losses could reach as high as RMB 0.076–3.501 billion yuan.This study revealed the causes of this extreme wind-dust compound disaster and quantified the disaster loss and impact,providing new insights for the prevention of associated disasters.展开更多
The western coast of Hainan Island exhibits a savanna landscape. Many types of sand dunes, including transverse dune ridges, longitudinal dune ridges, elliptical dunes, coppice dunes, and climbing dunes, are widely di...The western coast of Hainan Island exhibits a savanna landscape. Many types of sand dunes, including transverse dune ridges, longitudinal dune ridges, elliptical dunes, coppice dunes, and climbing dunes, are widely distributed in the coastal zone. In winter, high-frequency and high-energy NE winds （dominant winds） are prevalent, with a resultant drift direction （RDD） of S35.6°W. In spring, low-frequency and low-energy SW secondary winds prevail, with a RDD of N25.1°E. Wind tunnel simulations revealed that the airflow over the dune surface is the main factor controlling the erosion and deposition patterns of dune surfaces and the morphological development of dunes. In the region＇s bidirectional wind environment, with two seasonally distinct energy levels, the airflow over the surface of elliptical dunes, barchan dunes, and transverse dune ridges will exhibit a transverse pattern, whereas the airflow over longitudinal dunes ridges exhibits a lateral pattern and that over climbing dunes exhibits a climbing-circumfluent pattern. These patterns represent different dynamic processes. The coastal dunes on the western coast of Hainan Island are influenced by factors such as onshore winds, sand sources, coastal slopes, rivers, and forest shelter belts. The source of the sand that supplements these dunes particularly influences the development pattern： when there is more sand, the pattern shows positive equilibrium deposition between dune ridges and dunes; otherwise, it shows negative equilibrium deposition. The presence or absence of forest shelter belts also influences deposition and dune development patterns and transformation of dune forms. Coastal dunes and inland desert dunes experience similar dynamic processes, but the former have more diversified shapes and more complex formation mechanisms.展开更多
In the process of composite prepreg tape winding,the compaction force could influence the quality of winding products.According to the analysis and experiments,during the winding process of a rocket motor nozzle aft e...In the process of composite prepreg tape winding,the compaction force could influence the quality of winding products.According to the analysis and experiments,during the winding process of a rocket motor nozzle aft exit cone with a winding angle,there would be an error between the deposition speed of tape layers and the feeding speed of the compaction roller,which could influence the compaction force.Both a lack of compaction and overcompaction related to the feeding of the compaction roller could result in defects of winding nozzles.Thus,a flexible winding system has been developed for rocket motor nozzle winding.In the system,feeding of the compaction roller could be adjusted in real time to achieve an invariable compaction force.According to experiments,the force deformation model of the winding tape is a time-varying system.Thus,a forgetting factor recursive least square based parameter estimation proportional-integral-differential（PID）controller has been developed,which could estimate the time-varying parameter and control the compaction force by adjusting the feeding of the compaction roller during the winding process.According to the experimental results,a winding nozzle with fewer voids and a smooth surface could be wounded by the invariable compaction force in the flexible winding system.展开更多
As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels,compressed natural gas(CNG)vehicles are explored as an alternative to the conventional gasoline powered vehic...As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels,compressed natural gas(CNG)vehicles are explored as an alternative to the conventional gasoline powered vehicles.Because of the limited space available for the car,the composite pressure vessel(TypeⅡ)has been applied to the CNG vehicles to reach large capacity and weight lightening vehicles.High pressure vessel(TypeⅡ)is composed of a composite layer and a metal liner.The metal liner is formed by the deep drawing and ironing(D.D.I.)process,which is a complex process of deep drawing and ironing.The cylinder part is reinforced by composite layer wrapped through the filament winding process and is bonded to the liner by the curing process.In this study,an integrated design method was presented by establishing the techniques for FE analysis of entire processes(D.D.I.,filament winding and curing processes)to manufacture the CNG composite pressure vessel(TypeⅡ).Dimensions of the dies and the punches of the 1 st(cup drawing),2 nd(redrawing-ironing 1-ironing 2)and 3 rd(redrawing-ironing)stages were calculated theoretically,and shape of tractrix die to be satisfied with the minimum forming load was suggested for life improvement and manufacturing costs in the D.D.I.process.Thickness of the composite material was determined in the filament winding process,finally,conditions of the curing process(number of heating stage,curing temperature,heating rate and time)were proposed to reinforce adhesive strength between the composite layers.展开更多
Gearbox in offshore wind turbines is a component with the highest failure rates during operation. Analysis of gearbox repair policy that includes economic considerations is important for the effective operation of off...Gearbox in offshore wind turbines is a component with the highest failure rates during operation. Analysis of gearbox repair policy that includes economic considerations is important for the effective operation of offshore wind farms. From their initial perfect working states, gearboxes degrade with time, which leads to decreased working efficiency. Thus, offshore wind turbine gearboxes can be considered to be multi-state systems with the various levels of productivity for different working states. To efficiently compute the time-dependent distribution of this multi-state system and analyze its reliability, application of the nonhomogeneous continuous-time Markov process(NHCTMP) is appropriate for this type of object. To determine the relationship between operation time and maintenance cost, many factors must be taken into account, including maintenance processes and vessel requirements. Finally, an optimal repair policy can be formulated based on this relationship.展开更多
The simulation of wind power time series is a key process in renewable power allocation planning,operation mode calculation,and safety assessment.Traditional single-point modeling methods discretely generate wind powe...The simulation of wind power time series is a key process in renewable power allocation planning,operation mode calculation,and safety assessment.Traditional single-point modeling methods discretely generate wind power at each moment;however,they ignore the daily output characteristics and are unable to consider both modeling accuracy and efficiency.To resolve this problem,a wind power time series simulation model based on typical daily output processes and Markov algorithm is proposed.First,a typical daily output process classification method based on time series similarity and modified K-means clustering algorithm is presented.Second,considering the typical daily output processes as status variables,a wind power time series simulation model based on Markov algorithm is constructed.Finally,a case is analyzed based on the measured data of a wind farm in China.The proposed model is then compared with traditional methods to verify its effectiveness and applicability.The comparison results indicate that the statistical characteristics,probability distributions,and autocorrelation characteristics of the wind power time series generated by the proposed model are better than those of the traditional methods.Moreover,modeling efficiency considerably improves.展开更多
Wind energy is one of the widely applied renewable energies in the world. Wind turbine as the main wind energy converter at present has very complex technical system containing a huge number of components,actuators an...Wind energy is one of the widely applied renewable energies in the world. Wind turbine as the main wind energy converter at present has very complex technical system containing a huge number of components,actuators and sensors. However, despite of the hardware redundancy, sensor faults have often affected the wind turbine normal operation and thus caused energy generation loss. In this paper, aiming at the wind turbine hydraulic pitch system, data-driven design of process monitoring(PM) and diagnosis has been realized in the wind turbine benchmark. Fault tolerant control(FTC) strategies focused on sensor faults have also been presented here, where with the implementation of soft sensor the sensor fault can be handled and the performance of the system is improved. The performance of this method is demonstrated with the wind turbine benchmark provided by Math Works.展开更多
Samples from the Horqin sandy land were exposed to a series of wind velocities,and sink particles were collected at the end of the diffusion section of a wind tunnel.Grain sizes of collected samples show great variati...Samples from the Horqin sandy land were exposed to a series of wind velocities,and sink particles were collected at the end of the diffusion section of a wind tunnel.Grain sizes of collected samples show great variation because of the granularity difference of the surface samples.The original samples show lower average content of SiO_(2) and higher average content of Al _(2)O_(3),Fe_(2)O_(3),MgO,CaO,Na_(2)O,and K_(2)O than collected samples.Compared with other dust source areas in China,the Horqin sandy land had higher content of Zr,Ba,SiO_(2),Al_(2)O_(3) and K_(2)O.Compared with the average upper continental crust(UCC)composition,surface samples were rich in the content of Y,Zr,Nb,Ba,La,Nd.Geochemistry characteristics of fine grain components of the Horqin sandy land differ from those from other dust source regions,because fine-grained particles in the Horqin sandy land were mostly derived from various local deposits formed in its unique depositional environments influenced by several tectonic activities.展开更多
Stochastic simulation is an important means of acquiring fluctuating wind pressures for wind induced response analyses in structural engineering. The wind pressure acting on a large-span space structure can be charact...Stochastic simulation is an important means of acquiring fluctuating wind pressures for wind induced response analyses in structural engineering. The wind pressure acting on a large-span space structure can be characterized as a stationary non-Gaussian field. This paper reviews several simulation algorithms related to the Spectral Representation Method （SRM） and the Static Transformation Method （STM）. Polynomial and Exponential transformation functions （PSTM and ESTM） are discussed. Deficiencies in current algorithms, with respect to accuracy, stability and efficiency, are analyzed, and the algorithms are improved for better practical application. In order to verify the improved algorithm, wind pressure fields on a large-span roof are simulated and compared with wind tunnel data. The simulation results fit well with the wind tunnel data, and the algorithm accuracy, stability and efficiency are shown to be better than those of current algorithms.展开更多
In this paper further mathematical analysis on 'correlation transfer technique' by Polge el al. is carried out, the tenable conditions and the extent of suitability for the said method are proved as well. In c...In this paper further mathematical analysis on 'correlation transfer technique' by Polge el al. is carried out, the tenable conditions and the extent of suitability for the said method are proved as well. In consideration of the influence of skewness of the sea surface elevation on spectral shape, a 'quasi-correlation transfer techique' is developed by the modification of the simulated target spectrum. Meanwhile, the numerical simulation of the non-Gaussian process of wind waves is carried out in view of the two conditions of the surface elevation probability distribution and the spectrum. By using its simulated results, the influence of skewness of the sea surface elevation on two parameters in the distribution of wave heights (which had been fitted by using the Weibull distribution) is analysed. The 'quasi- correlation tranfer technique' is verified and compared with the selection wave data observed in the Jiaozhou Bay in the period of 1980 to 1981. Results make clear (hat, as far as the statistical distribution of the wave heights and the distribution of the maximum (minimum) values of the sea surface elevation are concerned, the said method is obviously superior to the conventional mothed of the linear wave superposition, and that the simulated results are closer to the observation data.展开更多
在中小型永磁同步风力发电机中,桥式整流+DC/DC变换器拓扑具有结构简单的优点,其中DC/DC电路有Boost和Buck两种拓扑,探究两者的最大功率点跟踪(Maximum Power Point Tracking,MPPT)控制性能区别是对其优化设计的关键,测控系统是性能分...在中小型永磁同步风力发电机中,桥式整流+DC/DC变换器拓扑具有结构简单的优点,其中DC/DC电路有Boost和Buck两种拓扑,探究两者的最大功率点跟踪(Maximum Power Point Tracking,MPPT)控制性能区别是对其优化设计的关键,测控系统是性能分析的重要手段。通过系统总体方案设计,确认了系统参数及指标;分析了四桥臂DC/DC拓扑,并基于高端电流采样和隔离采样技术实现了系统电压、电流、功率和频率的采集,设计了功率驱动及单片机控制电路;探讨了适合单片机的MPPT爬坡搜索法软件;给出了基于LabVIEW的上位机操控系统的软件设计实现;搭建了测控系统,进行了MPPT和两种拓扑测控结果对比实验。实验结果表明测控系统达到了设计目标。展开更多
针对风力发电机组频发的火灾事故,首先从人-机-环-管角度出发,通过统计分析近20年来全球81起风力发电机组火灾事故案例,得到了21项风力发电机组火灾事故的影响因素;然后通过事故树分析(fault tree analysis,FTA)法演绎推理得到了风力发...针对风力发电机组频发的火灾事故,首先从人-机-环-管角度出发,通过统计分析近20年来全球81起风力发电机组火灾事故案例,得到了21项风力发电机组火灾事故的影响因素;然后通过事故树分析(fault tree analysis,FTA)法演绎推理得到了风力发电机组火灾事故各基本事件的逻辑关系,并根据结构重要度进行了火灾事故致因的定性分析;接着采用模糊层次分析(fuzzy analytic hierarchy process,FAHP)法,将事故树的基本事件从人、机、环、管4个方面整合,构建出风力发电机组火灾事故致因评价指标体系,并以结构重要度系数的顺序为模糊判断矩阵的赋值依据,进行了火灾事故致因的定量分析;最后,根据综合分析结果提出了风力发电机组火灾事故的对策措施。结果表明:机和环境的不安全因素是引发火灾事故的主要致因;电气设备故障和雷击是最主要因素。该研究成果可为风力发电机组的火灾防治提供理论参考。展开更多
基金supported by the National Natural Science Foundation of China(Grant No.42330502)the Central Government Guided Local Science and Technology Development Fund of Qinghai Province—Science and Technology Innovation Base Construction Project(Grant No.2025ZY017)。
文摘From 10 to 15 April 2025,China experienced a rare persistent extreme wind-dust compound disaster that swept from north to south.Based on observational data,historical disaster records,and situations of various exposed elements,this study analyzed the formation mechanisms and evolution of this extreme event and conducted a rapid assessment of the associated loss and damage.The results indicate that the direct cause of this extreme wind-dust compound disaster was a strong cold vortex system generated in Mongolia,which moved eastward and southward,combined with the amplification effects of topography and urban structures,and the downward transmission of momentum from higher troposphere.The analysis revealed that approximately 697.47 million people were exposed to strong winds,while about 1,374.54 million people were exposed to high concentrations of PM10.The strong winds also caused varying degrees of damage to buildings,transportation networks,agricultural greenhouses,and forests.Based on vulnerability curves for wind-related loss and damage,it was estimated that the number of victims affected by this extreme wind-dust compound disaster ranged from 0.209 to 1.044 million,with casualties between 5 and 13 individuals.The number of damaged buildings was estimated to be between 2115 and 4607,and the area of affected crops was between 229 and 783 km2.The direct economic losses could reach as high as RMB 0.076–3.501 billion yuan.This study revealed the causes of this extreme wind-dust compound disaster and quantified the disaster loss and impact,providing new insights for the prevention of associated disasters.
基金National Natural Science Foundation of China, No.40671186 No.40271012
文摘The western coast of Hainan Island exhibits a savanna landscape. Many types of sand dunes, including transverse dune ridges, longitudinal dune ridges, elliptical dunes, coppice dunes, and climbing dunes, are widely distributed in the coastal zone. In winter, high-frequency and high-energy NE winds （dominant winds） are prevalent, with a resultant drift direction （RDD） of S35.6°W. In spring, low-frequency and low-energy SW secondary winds prevail, with a RDD of N25.1°E. Wind tunnel simulations revealed that the airflow over the dune surface is the main factor controlling the erosion and deposition patterns of dune surfaces and the morphological development of dunes. In the region＇s bidirectional wind environment, with two seasonally distinct energy levels, the airflow over the surface of elliptical dunes, barchan dunes, and transverse dune ridges will exhibit a transverse pattern, whereas the airflow over longitudinal dunes ridges exhibits a lateral pattern and that over climbing dunes exhibits a climbing-circumfluent pattern. These patterns represent different dynamic processes. The coastal dunes on the western coast of Hainan Island are influenced by factors such as onshore winds, sand sources, coastal slopes, rivers, and forest shelter belts. The source of the sand that supplements these dunes particularly influences the development pattern： when there is more sand, the pattern shows positive equilibrium deposition between dune ridges and dunes; otherwise, it shows negative equilibrium deposition. The presence or absence of forest shelter belts also influences deposition and dune development patterns and transformation of dune forms. Coastal dunes and inland desert dunes experience similar dynamic processes, but the former have more diversified shapes and more complex formation mechanisms.
基金supported by the National Natural Science Foundation of China(No.51375394)
文摘In the process of composite prepreg tape winding,the compaction force could influence the quality of winding products.According to the analysis and experiments,during the winding process of a rocket motor nozzle aft exit cone with a winding angle,there would be an error between the deposition speed of tape layers and the feeding speed of the compaction roller,which could influence the compaction force.Both a lack of compaction and overcompaction related to the feeding of the compaction roller could result in defects of winding nozzles.Thus,a flexible winding system has been developed for rocket motor nozzle winding.In the system,feeding of the compaction roller could be adjusted in real time to achieve an invariable compaction force.According to experiments,the force deformation model of the winding tape is a time-varying system.Thus,a forgetting factor recursive least square based parameter estimation proportional-integral-differential（PID）controller has been developed,which could estimate the time-varying parameter and control the compaction force by adjusting the feeding of the compaction roller during the winding process.According to the experimental results,a winding nozzle with fewer voids and a smooth surface could be wounded by the invariable compaction force in the flexible winding system.
基金Supported by National Research Foundation of Korea(NRF)Korea Government(MSIT)(Grant No.2019R1F1A1058521)
文摘As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels,compressed natural gas(CNG)vehicles are explored as an alternative to the conventional gasoline powered vehicles.Because of the limited space available for the car,the composite pressure vessel(TypeⅡ)has been applied to the CNG vehicles to reach large capacity and weight lightening vehicles.High pressure vessel(TypeⅡ)is composed of a composite layer and a metal liner.The metal liner is formed by the deep drawing and ironing(D.D.I.)process,which is a complex process of deep drawing and ironing.The cylinder part is reinforced by composite layer wrapped through the filament winding process and is bonded to the liner by the curing process.In this study,an integrated design method was presented by establishing the techniques for FE analysis of entire processes(D.D.I.,filament winding and curing processes)to manufacture the CNG composite pressure vessel(TypeⅡ).Dimensions of the dies and the punches of the 1 st(cup drawing),2 nd(redrawing-ironing 1-ironing 2)and 3 rd(redrawing-ironing)stages were calculated theoretically,and shape of tractrix die to be satisfied with the minimum forming load was suggested for life improvement and manufacturing costs in the D.D.I.process.Thickness of the composite material was determined in the filament winding process,finally,conditions of the curing process(number of heating stage,curing temperature,heating rate and time)were proposed to reinforce adhesive strength between the composite layers.
文摘Gearbox in offshore wind turbines is a component with the highest failure rates during operation. Analysis of gearbox repair policy that includes economic considerations is important for the effective operation of offshore wind farms. From their initial perfect working states, gearboxes degrade with time, which leads to decreased working efficiency. Thus, offshore wind turbine gearboxes can be considered to be multi-state systems with the various levels of productivity for different working states. To efficiently compute the time-dependent distribution of this multi-state system and analyze its reliability, application of the nonhomogeneous continuous-time Markov process(NHCTMP) is appropriate for this type of object. To determine the relationship between operation time and maintenance cost, many factors must be taken into account, including maintenance processes and vessel requirements. Finally, an optimal repair policy can be formulated based on this relationship.
基金supported by the China Datang Corporation project“Study on the performance improvement scheme of in-service wind farms”,the Fundamental Research Funds for the Central Universities(2020MS021)the Foundation of State Key Laboratory“Real-time prediction of offshore wind power and load reduction control method”(LAPS2020-07).
文摘The simulation of wind power time series is a key process in renewable power allocation planning,operation mode calculation,and safety assessment.Traditional single-point modeling methods discretely generate wind power at each moment;however,they ignore the daily output characteristics and are unable to consider both modeling accuracy and efficiency.To resolve this problem,a wind power time series simulation model based on typical daily output processes and Markov algorithm is proposed.First,a typical daily output process classification method based on time series similarity and modified K-means clustering algorithm is presented.Second,considering the typical daily output processes as status variables,a wind power time series simulation model based on Markov algorithm is constructed.Finally,a case is analyzed based on the measured data of a wind farm in China.The proposed model is then compared with traditional methods to verify its effectiveness and applicability.The comparison results indicate that the statistical characteristics,probability distributions,and autocorrelation characteristics of the wind power time series generated by the proposed model are better than those of the traditional methods.Moreover,modeling efficiency considerably improves.
基金the National Natural Science Foundation of China(No.51205018)the Fundamental Research Funds for the Central Universities of China(No.FRF-TP-14-121A2)the Research Project of State Key Laboratory of Mechanical System and Vibration(No.MSV-2014-09)
文摘Wind energy is one of the widely applied renewable energies in the world. Wind turbine as the main wind energy converter at present has very complex technical system containing a huge number of components,actuators and sensors. However, despite of the hardware redundancy, sensor faults have often affected the wind turbine normal operation and thus caused energy generation loss. In this paper, aiming at the wind turbine hydraulic pitch system, data-driven design of process monitoring(PM) and diagnosis has been realized in the wind turbine benchmark. Fault tolerant control(FTC) strategies focused on sensor faults have also been presented here, where with the implementation of soft sensor the sensor fault can be handled and the performance of the system is improved. The performance of this method is demonstrated with the wind turbine benchmark provided by Math Works.
基金This research was supported by the National Key R&D Program of China(No.2020YFA0608404)a grant from the National Nature Science Foundation of China(41101006)and the Project of the Key Laboratory of Desert and Desertification,Chinese Academy of Sciences(KLDD-2019-008).
文摘Samples from the Horqin sandy land were exposed to a series of wind velocities,and sink particles were collected at the end of the diffusion section of a wind tunnel.Grain sizes of collected samples show great variation because of the granularity difference of the surface samples.The original samples show lower average content of SiO_(2) and higher average content of Al _(2)O_(3),Fe_(2)O_(3),MgO,CaO,Na_(2)O,and K_(2)O than collected samples.Compared with other dust source areas in China,the Horqin sandy land had higher content of Zr,Ba,SiO_(2),Al_(2)O_(3) and K_(2)O.Compared with the average upper continental crust(UCC)composition,surface samples were rich in the content of Y,Zr,Nb,Ba,La,Nd.Geochemistry characteristics of fine grain components of the Horqin sandy land differ from those from other dust source regions,because fine-grained particles in the Horqin sandy land were mostly derived from various local deposits formed in its unique depositional environments influenced by several tectonic activities.
基金National Natural Science Foundation of China under Grant Nos.51278160,51478155,51378147
文摘Stochastic simulation is an important means of acquiring fluctuating wind pressures for wind induced response analyses in structural engineering. The wind pressure acting on a large-span space structure can be characterized as a stationary non-Gaussian field. This paper reviews several simulation algorithms related to the Spectral Representation Method （SRM） and the Static Transformation Method （STM）. Polynomial and Exponential transformation functions （PSTM and ESTM） are discussed. Deficiencies in current algorithms, with respect to accuracy, stability and efficiency, are analyzed, and the algorithms are improved for better practical application. In order to verify the improved algorithm, wind pressure fields on a large-span roof are simulated and compared with wind tunnel data. The simulation results fit well with the wind tunnel data, and the algorithm accuracy, stability and efficiency are shown to be better than those of current algorithms.
文摘In this paper further mathematical analysis on 'correlation transfer technique' by Polge el al. is carried out, the tenable conditions and the extent of suitability for the said method are proved as well. In consideration of the influence of skewness of the sea surface elevation on spectral shape, a 'quasi-correlation transfer techique' is developed by the modification of the simulated target spectrum. Meanwhile, the numerical simulation of the non-Gaussian process of wind waves is carried out in view of the two conditions of the surface elevation probability distribution and the spectrum. By using its simulated results, the influence of skewness of the sea surface elevation on two parameters in the distribution of wave heights (which had been fitted by using the Weibull distribution) is analysed. The 'quasi- correlation tranfer technique' is verified and compared with the selection wave data observed in the Jiaozhou Bay in the period of 1980 to 1981. Results make clear (hat, as far as the statistical distribution of the wave heights and the distribution of the maximum (minimum) values of the sea surface elevation are concerned, the said method is obviously superior to the conventional mothed of the linear wave superposition, and that the simulated results are closer to the observation data.
文摘在中小型永磁同步风力发电机中,桥式整流+DC/DC变换器拓扑具有结构简单的优点,其中DC/DC电路有Boost和Buck两种拓扑,探究两者的最大功率点跟踪(Maximum Power Point Tracking,MPPT)控制性能区别是对其优化设计的关键,测控系统是性能分析的重要手段。通过系统总体方案设计,确认了系统参数及指标;分析了四桥臂DC/DC拓扑,并基于高端电流采样和隔离采样技术实现了系统电压、电流、功率和频率的采集,设计了功率驱动及单片机控制电路;探讨了适合单片机的MPPT爬坡搜索法软件;给出了基于LabVIEW的上位机操控系统的软件设计实现;搭建了测控系统,进行了MPPT和两种拓扑测控结果对比实验。实验结果表明测控系统达到了设计目标。
