As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing pl...As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing planetary habitability and the search for extraterrestrial life.The integrated measurement of N_(2)and argon(Ar)isotopes by using noble gas mass spectrometry represents a state-of-the-art technique for such investigations.To support the growing demands of planetary science research in China,we have developed a high-efficiency,high-precision method for the integrated analysis of N_(2)and Ar isotopes.This was achieved by enhancing gas extraction and purification systems and integrating them with a static noble gas mass spectrometer.This method enables integrated N_(2)-Ar isotope measurements on submilligram samples,significantly improving sample utilization and reducing the impact of sample heterogeneity on volatile analysis.The system integrates CO_(2)laser heating,a modular two-stage Zr-Al getter pump,and a CuO furnace-based purification process,effectively reducing background levels(N_(2)blank as low as 0.35×10^(−6)cubic centimeters at standard temperature and pressure[ccSTP]).Analytical precision is ensured through calibration with atmospheric air and CO corrections.To validate the reliability of the method,we performed N_(2)-Ar isotope analyses on the Allende carbonaceous chondrite,one of the most extensively studied meteorites internationally.The measured N_(2)concentrations range from 19.2 to 29.8 ppm,withδ15N values between−44.8‰and−33.0‰.Concentrations of 40Ar,36Ar,and 38Ar are(12.5-21.1)×10^(−6)ccSTP/g,(90.9-150.3)×10^(−9)ccSTP/g,and(19.2-30.7)×10^(−9)ccSTP/g,respectively.These values correspond to cosmic-ray exposure ages of 4.5-5.7 Ma,consistent with previous reports.Step-heating experiments further reveal distinct release patterns of N and Ar isotopes,as well as their associations with specific mineral phases in the meteorite.In summary,the combined N_(2)-Ar isotopic system offers significant advantages for tracing volatile sources in extraterrestrial materials and will provide essential analytical support for upcoming Chinese planetary missions,such as Tianwen-2.展开更多
Grid-connected current control is one.of the important control schemes in distributed generation systems.A lot of control methods have been developed,such as hysteresis control,dead-beat control,one-cycle control,etc....Grid-connected current control is one.of the important control schemes in distributed generation systems.A lot of control methods have been developed,such as hysteresis control,dead-beat control,one-cycle control,etc.Hysteresis current control has the advantages of simplicity,robustness and good large-signal response.Unfortunately,the switching frequency of the converter using hysteresis current control varies according to the parameters of the bus voltage,the filter inductor and the bandwidth.Increasing the hysteresis bandwidth and the filter inductance can reduce the switching frequency.展开更多
Organophosphate esters（OPEs）, used as flame retardants and plasticizers, are widely present in environmental waters. Development of accurate determination methods for trace OPEs in water is urgent for understanding ...Organophosphate esters（OPEs）, used as flame retardants and plasticizers, are widely present in environmental waters. Development of accurate determination methods for trace OPEs in water is urgent for understanding the fate and risk of this class of emerging pollutants. However, the wide use of OPEs in experimental materials results in blank interference, which influences the accuracy of analytical results. In the present work, blank contamination and recovery of pretreatment procedures for analysis of OPEs in water samples were systematically examined for the first time. Blank contaminations were observed in filtration membranes, glass bottles, solid phase extraction cartridges, and nitrogen blowing instruments. These contaminations could be as high as 6.4–64 ng/L per treatment. Different kinds of membranes were compared in terms of contamination levels left after common glassware cleaning, and a special wash procedure was proposed to eliminate the contamination from membranes. Meanwhile, adsorption of highly hydrophobic OPEs on the inside wall of glass bottles was found to be 42.4%–86.1%, which was the primary cause of low recoveries and was significantly reduced by an additional washing step with acetonitrile. This work is expected to provide guidelines for the establishment of analysis methods for OPEs in aqueous samples.展开更多
Objective To develop methods for determining a suitable sample size for bioequivalence assessment of generic topical ophthalmic drugs using crossover design with serial sampling schemes.Methods The power functions of ...Objective To develop methods for determining a suitable sample size for bioequivalence assessment of generic topical ophthalmic drugs using crossover design with serial sampling schemes.Methods The power functions of the Fieller-type confidence interval and the asymptotic confidence interval in crossover designs with serial-sampling data are here derived.Simulation studies were conducted to evaluate the derived power functions.Results Simulation studies show that two power functions can provide precise power estimates when normality assumptions are satisfied and yield conservative estimates of power in cases when data are log-normally distributed.The intra-correlation showed a positive correlation with the power of the bioequivalence test.When the expected ratio of the AUCs was less than or equal to 1, the power of the Fieller-type confidence interval was larger than the asymptotic confidence interval.If the expected ratio of the AUCs was larger than 1, the asymptotic confidence interval had greater power.Sample size can be calculated through numerical iteration with the derived power functions.Conclusion The Fieller-type power function and the asymptotic power function can be used to determine sample sizes of crossover trials for bioequivalence assessment of topical ophthalmic drugs.展开更多
Steganography techniques,such as audio steganography,have been widely used in covert communication.However,the deep neural network,especially the convolutional neural network(CNN),has greatly threatened the security o...Steganography techniques,such as audio steganography,have been widely used in covert communication.However,the deep neural network,especially the convolutional neural network(CNN),has greatly threatened the security of audio steganography.Besides,existing adversarial attacks-based countermeasures cannot provide general perturbation,and the trans-ferability against unknown steganography detection methods is weak.This paper proposes a cover enhancement method for audio steganography based on universal adversarial perturbations with sample diversification to address these issues.Universal adversarial perturbation is constructed by iteratively optimizing adversarial perturbation,which applies adversarial attack tech-niques,such as Deepfool.Moreover,the sample diversification strategy is designed to improve the transferability of adversarial perturbations in black-box attack scenarios,where two types of common audio-processing operations are considered,including noise addition and moving picture experts group audio layer III(MP3)compression.Furthermore,the perturbation ensemble method is applied to further improve the attacks’transferability by integrating perturbations of different detection networks with heterogeneous architec-tures.Consequently,the single universal adversarial perturbation can enhance different cover audios against a CNN-based detection network.Extensive experiments have been conducted,and the results demonstrate that the average missed-detection probabilities of the proposed method are higher than those of the state-of-the-art methods by 7.3%and 16.6%for known and unknown detection networks,respectively.It verifies the efficiency and transferability of the proposed methods for the cover enhancement of audio steganography.展开更多
Kernel size-related traits,including kernel length,kernel width,and kernel thickness,are critical components in determining yield and kernel quality in maize(Zea mays L.).Dissecting the phenotypic characteristics of t...Kernel size-related traits,including kernel length,kernel width,and kernel thickness,are critical components in determining yield and kernel quality in maize(Zea mays L.).Dissecting the phenotypic characteristics of these traits,and discovering the candidate chromosomal regions for these traits,are of potential importance for maize yield and quality improvement.In this study,a total of 139 F2:3 family lines derived from EHel and B73,a distinct line with extremely low ear height(EHel),was used for phenotyping and QTL mapping of three kernel sizerelated traits,including 10-kernel length(KL),10-kernel width(KWid),and 10-kernel thickness(KT).The results showed that only one QTL for KWid,i.e.,qKWid9 on Chr9,with a phenotypic variation explained(PVE)of 13.4%was detected between SNPs of AX-86298371 and AX-86298372,while no QTLs were detected for KL and KT across all 10 chromosomes.Four bulked groups of family lines,i.e.,Groups I to IV,were constructed with F2:3 family lines according to the phenotypic comparisons of KWid between EHel and B73.Among these four groups,Group I possessed a significantly lower KWid than EHel(P=0.0455),Group II was similar to EHel(P=0.34),while both Group III and Group IV were statistically higher than EHel(P<0.05).Besides,except Group IV exhibited a similar KWid to B73(P=0.11),KWid of Groups I to III were statistically lower than B73(P<0.00).By comparing the bulked genotypes of the four groups to EHel and B73,a stable chromosomal region on Chr9 between SNPs of AX-86298372 to AX-86263154,entirely covered by qKWid9,was identified to link KWid with the positive allele of increasing phenotypic effect to KWid from B73,similar to that of qKWid9.A large amount of enzyme activity and macromolecule binding-related genes were annotated within this chromosomal region,suggesting qKWid9 as a potential QTL for KWid in maize.展开更多
Industrial data mining usually deals with data from different sources.These heterogeneous datasets describe the same object in different views.However,samples from some of the datasets may be lost.Then the remaining s...Industrial data mining usually deals with data from different sources.These heterogeneous datasets describe the same object in different views.However,samples from some of the datasets may be lost.Then the remaining samples do not correspond one-to-one correctly.Mismatched datasets caused by missing samples make the industrial data unavailable for further machine learning.In order to align the mismatched samples,this article presents a cooperative iteration matching method(CIMM)based on the modified dynamic time warping(DTW).The proposed method regards the sequentially accumulated industrial data as the time series.Mismatched samples are aligned by the DTW.In addition,dynamic constraints are applied to the warping distance of the DTW process to make the alignment more efficient.Then a series of models are trained with the cumulated samples iteratively.Several groups of numerical experiments on different missing patterns and missing locations are designed and analyzed to prove the effectiveness and the applicability of the proposed method.展开更多
Marine gas hydrates are highly sensitive to temperature and pressure fluctuations,and deviations from in-situ conditions may cause irreversible changes in phase state,microstructure,and mechanical properties.However,c...Marine gas hydrates are highly sensitive to temperature and pressure fluctuations,and deviations from in-situ conditions may cause irreversible changes in phase state,microstructure,and mechanical properties.However,conventional samplers often fail to maintain sealing and thermal stability,resulting in low sampling success rates.To address these challenges,an in-situ temperature-and pressure-preserved sampler for marine applications has been developed.The experimental results indicate that the selfdeveloped magnetically controlled pressure-preserved controller reliably achieves autonomous triggering and self-sealing,provides an initial sealing force of 83 N,and is capable of maintaining pressures up to 40 MPa.Additionally,a custom-designed intelligent temperature control chip and high-precision sensors were integrated into the sampler.Through the design of an optimized heat transfer structure,a temperature-preserved system was developed,achieving no more than a 0.3℃ rise in temperature within 2 h.The performance evaluation and sampling operations of the sampler were conducted at the Haima Cold Seep in the South China Sea,resulting in the successful recovery of hydrate maintained under in-situ pressure of 13.8 MPa and a temperature of 6.5℃.This advancement enables the acquisition of high-fidelity hydrate samples,providing critical support for the safe exploitation and scientific analysis of marine gas hydrate resources.展开更多
As an emerging microscopic detection tool,quantum microscopes based on the principle of quantum precision measurement have attracted widespread attention in recent years.Compared with the imaging of classical light,qu...As an emerging microscopic detection tool,quantum microscopes based on the principle of quantum precision measurement have attracted widespread attention in recent years.Compared with the imaging of classical light,quantum-enhanced imaging can achieve ultra-high resolution,ultra-sensitive detection,and anti-interference imaging.Here,we introduce a quantum-enhanced scanning microscope under illumination of an entangled NOON state in polarization.For the phase imager with NOON states,we propose a simple four-basis projection method to replace the four-step phase-shifting method.We have achieved the phase imaging of micrometer-sized birefringent samples and biological cell specimens,with sensitivity close to the Heisenberg limit.The visibility of transmittance-based imaging shows a great enhancement for NOON states.Besides,we also demonstrate that the scanning imaging with NOON states enables the spatial resolution enhancement of√N compared with classical measurement.Our imaging method may provide some reference for the practical application of quantum imaging and is expected to promote the development of microscopic detection.展开更多
An intelligent diagnosis method based on self-adaptiveWasserstein dual generative adversarial networks and feature fusion is proposed due to problems such as insufficient sample size and incomplete fault feature extra...An intelligent diagnosis method based on self-adaptiveWasserstein dual generative adversarial networks and feature fusion is proposed due to problems such as insufficient sample size and incomplete fault feature extraction,which are commonly faced by rolling bearings and lead to low diagnostic accuracy.Initially,dual models of the Wasserstein deep convolutional generative adversarial network incorporating gradient penalty(1D-2DWDCGAN)are constructed to augment the original dataset.A self-adaptive loss threshold control training strategy is introduced,and establishing a self-adaptive balancing mechanism for stable model training.Subsequently,a diagnostic model based on multidimensional feature fusion is designed,wherein complex features from various dimensions are extracted,merging the original signal waveform features,structured features,and time-frequency features into a deep composite feature representation that encompasses multiple dimensions and scales;thus,efficient and accurate small sample fault diagnosis is facilitated.Finally,an experiment between the bearing fault dataset of CaseWestern ReserveUniversity and the fault simulation experimental platformdataset of this research group shows that this method effectively supplements the dataset and remarkably improves the diagnostic accuracy.The diagnostic accuracy after data augmentation reached 99.94%and 99.87%in two different experimental environments,respectively.In addition,robustness analysis is conducted on the diagnostic accuracy of the proposed method under different noise backgrounds,verifying its good generalization performance.展开更多
Flow cytometry(FCM),characterized by its simplicity,rapid processing,multiparameter analysis,and high sen-sitivity,is widely used in the diagnosis,treatment,and prognosis of hematological malignancies.FCM testing of t...Flow cytometry(FCM),characterized by its simplicity,rapid processing,multiparameter analysis,and high sen-sitivity,is widely used in the diagnosis,treatment,and prognosis of hematological malignancies.FCM testing of tissue samples not only aids in diagnosing and classifying hematological cancers,but also enables the detection of solid tumors.Its ability to detect numerous marker parameters from small samples is particularly useful when dealing with limited cell quantities,such as in fine-needle biopsy samples.This attribute not only addresses the challenge posed by small sample sizes,but also boosts the sensitivity of tumor cell detection.The significance of FCM in clinical and pathological applications continues to grow.To standardize the use of FCM in detecting hematological malignant cells in tissue samples and to improve quality control during the detection process,experts from the Cell Analysis Professional Committee of the Chinese Society of Biotechnology jointly drafted and agreed upon this consensus.This consensus was formulated based on current literature and clinical practices of all experts across clinical,laboratory,and pathological fields in China.It outlines a comprehensive workflow of FCM-based assay for the detection of hematological malignancies in tissue samples,including report content,interpretation,quality control,and key considerations.Additionally,it provides recommendations on antibody panel designs and analytical approaches to enhancing FCM tests,particularly in cases with limited sample sizes.展开更多
In the task of Facial Expression Recognition(FER),data uncertainty has been a critical factor affecting performance,typically arising from the ambiguity of facial expressions,low-quality images,and the subjectivity of...In the task of Facial Expression Recognition(FER),data uncertainty has been a critical factor affecting performance,typically arising from the ambiguity of facial expressions,low-quality images,and the subjectivity of annotators.Tracking the training history reveals that misclassified samples often exhibit high confidence and excessive uncertainty in the early stages of training.To address this issue,we propose an uncertainty-based robust sample selection strategy,which combines confidence error with RandAugment to improve image diversity,effectively reducing overfitting caused by uncertain samples during deep learning model training.To validate the effectiveness of the proposed method,extensive experiments were conducted on FER public benchmarks.The accuracy obtained were 89.08%on RAF-DB,63.12%on AffectNet,and 88.73%on FERPlus.展开更多
Continuous control protocols are extensively utilized in traditional MASs,in which information needs to be transmitted among agents consecutively,therefore resulting in excessive consumption of limited resources.To de...Continuous control protocols are extensively utilized in traditional MASs,in which information needs to be transmitted among agents consecutively,therefore resulting in excessive consumption of limited resources.To decrease the control cost,based on ISC,several LFC problems are investigated for second-order MASs without and with time delay,respectively.Firstly,an intermittent sampled controller is designed,and a sufficient and necessary condition is derived,under which state errors between the leader and all the followers approach zero asymptotically.Considering that time delay is inevitable,a new protocol is proposed to deal with the time-delay situation.The error system’s stability is analyzed using the Schur stability theorem,and sufficient and necessary conditions for LFC are obtained,which are closely associated with the coupling gain,the system parameters,and the network structure.Furthermore,for the case where the current position and velocity information are not available,a distributed protocol is designed that depends only on the sampled position information.The sufficient and necessary conditions for LFC are also given.The results show that second-order MASs can achieve the LFC if and only if the system parameters satisfy the inequalities proposed in the paper.Finally,the correctness of the obtained results is verified by numerical simulations.展开更多
Quantum photonic processors are emerging as promising platforms to prove preliminary evidence of quantum computational advantage toward the realization of universal quantum computers.In the context of nonuniversal noi...Quantum photonic processors are emerging as promising platforms to prove preliminary evidence of quantum computational advantage toward the realization of universal quantum computers.In the context of nonuniversal noisy intermediate quantum devices,photonic-based sampling machines solving the Gaussian boson sampling(GBS)problem currently play a central role in the experimental demonstration of quantum computational advantage.A relevant issue is the validation of the sampling process in the presence of experimental noise,such as photon losses,which could undermine the hardness of simulating the experiment.We test the capability of a validation protocol that exploits the connection between GBS and graph perfect match counting to perform such an assessment in a noisy scenario.In particular,we use as a test bench the recently developed machine Borealis,a large-scale sampling machine that has been made available online for external users,and address its operation in the presence of noise.The employed approach to validation is also shown to provide connections with the open question on the effective advantage of using noisy GBS devices for graph similarity and isomorphism problems and thus provides an effective method for certification of quantum hardware.展开更多
In this paper,an image processing algorithm which is able to synthesize material textures of arbitrary shapes is proposed.The presented approach uses an arbitrary image to construct a structure layer of the material.T...In this paper,an image processing algorithm which is able to synthesize material textures of arbitrary shapes is proposed.The presented approach uses an arbitrary image to construct a structure layer of the material.The resulting structure layer is then used to constrain the material texture synthesis.The field of second-moment matrices is used to represent the structure layer.Many tests with various constraint images are conducted to ensure that the proposed approach accurately reproduces the visual aspects of the input material sample.The results demonstrate that the proposed algorithm is able to accurately synthesize arbitrary-shaped material textures while respecting the local characteristics of the exemplar.This paves the way toward the synthesis of 3D material textures of arbitrary shapes from 2D material samples,which has a wide application range in virtual material design and materials characterization.展开更多
In this paper, we use sample average approximation with adaptive multiple importance sampling to explore moderate deviations for the optimal values. Utilizing the moderate deviation principle for martingale difference...In this paper, we use sample average approximation with adaptive multiple importance sampling to explore moderate deviations for the optimal values. Utilizing the moderate deviation principle for martingale differences and an appropriate Delta method, we establish a moderate deviation principle for the optimal value. Moreover, for a functional form of stochastic programming, we obtain a functional moderate deviation principle for its optimal value.展开更多
Large amounts of labeled data are usually needed for training deep neural networks in medical image studies,particularly in medical image classification.However,in the field of semi-supervised medical image analysis,l...Large amounts of labeled data are usually needed for training deep neural networks in medical image studies,particularly in medical image classification.However,in the field of semi-supervised medical image analysis,labeled data is very scarce due to patient privacy concerns.For researchers,obtaining high-quality labeled images is exceedingly challenging because it involves manual annotation and clinical understanding.In addition,skin datasets are highly suitable for medical image classification studies due to the inter-class relationships and the inter-class similarities of skin lesions.In this paper,we propose a model called Coalition Sample Relation Consistency(CSRC),a consistency-based method that leverages Canonical Correlation Analysis(CCA)to capture the intrinsic relationships between samples.Considering that traditional consistency-based models only focus on the consistency of prediction,we additionally explore the similarity between features by using CCA.We enforce feature relation consistency based on traditional models,encouraging the model to learn more meaningful information from unlabeled data.Finally,considering that cross-entropy loss is not as suitable as the supervised loss when studying with imbalanced datasets(i.e.,ISIC 2017 and ISIC 2018),we improve the supervised loss to achieve better classification accuracy.Our study shows that this model performs better than many semi-supervised methods.展开更多
Geological samples often contain significant amounts of iron,which,although not typically the target element,can substantially interfere with the analysis of other elements of interest.To mitigate these interferences,...Geological samples often contain significant amounts of iron,which,although not typically the target element,can substantially interfere with the analysis of other elements of interest.To mitigate these interferences,amidoximebased radiation grafted adsorbents have been identified as effective for iron removal.In this study,an amidoximefunctionalized,radiation-grafted adsorbent synthesized from polypropylene waste(PPw-g-AO-10)was employed to remove iron from leached geological samples.The adsorption process was systematically optimized by investigating the effects of pH,contact time,adsorbent dosage,and initial ferric ion concentration.Under optimal conditions-pH1.4,a contact time of 90 min,and an initial ferric ion concentration of 4500 mg/L-the adsorbent exhibited a maximum iron adsorption capacity of 269.02 mg/g.After optimizing the critical adsorption parameters,the adsorbent was applied to the leached geological samples,achieving a 91%removal of the iron content.The adsorbent was regenerated through two consecutive cycles using 0.2 N HNO_(3),achieving a regeneration efficiency of 65%.These findings confirm the efficacy of the synthesized PPw-g-AO-10 as a cost-effective and eco-friendly adsorbent for successfully removing iron from leached geological matrices while maintaining a reasonable degree of reusability.展开更多
The electromagnetic pulse valve,as a key component in baghouse dust removal systems,plays a crucial role in the performance of the system.However,despite the promising results of intelligent fault diagnosis methods ba...The electromagnetic pulse valve,as a key component in baghouse dust removal systems,plays a crucial role in the performance of the system.However,despite the promising results of intelligent fault diagnosis methods based on extensive data in diagnosing electromagnetic valves,real-world diagnostic scenarios still face numerous challenges.Collecting fault data for electromagnetic pulse valves is not only time-consuming but also costly,making it difficult to obtain sufficient fault data in advance,which poses challenges for small sample fault diagnosis.To address this issue,this paper proposes a fault diagnosis method for electromagnetic pulse valves based on deep transfer learning and simulated data.This method achieves effective transfer from simulated data to real data through four parameter transfer strategies,which combine parameter freezing and fine-tuning operations.Furthermore,this paper identifies a parameter transfer strategy that simultaneously fine-tunes the feature extractor and classifier,and introduces an attention mechanism to integrate fault features,thereby enhancing the correlation and information complementarity among multi-sensor data.The effectiveness of the proposed method is evaluated through two fault diagnosis cases under different operating conditions.In this study,small sample data accounted for 7.9%and 8.2%of the total dataset,and the experimental results showed transfer accuracies of 93.5%and 94.2%,respectively,validating the reliability and effectiveness of the method under small sample conditions.展开更多
A lifespan prediction model was developed based on a few samples to provide decision-making information for operation and maintenance,as well as improve the economy and safety of nuclear power plant(NPP)operations.Thi...A lifespan prediction model was developed based on a few samples to provide decision-making information for operation and maintenance,as well as improve the economy and safety of nuclear power plant(NPP)operations.This paper applies a Weibull model to forecast the lifespan of electronic cards with a few samples in NPPs.Relationship between the lifespan prediction of electronic cards and the ambient temperature is revealed using the Arrhenius equation.Censored samples are used to compensate for the lack of fault electronic card data.Scale parameter and shape parameter of the Weibull model are optimized by adjusting the weight ratio between the censored data and the fault data.Characteristic life is then obtained using the rank regression fitting equation.Parameters of the Arrhenius equation can be calculated by dividing the samples into groups according to the ambient temperature.A case study of the intermediate range high-voltage electric card of ex-core neutron detectors demonstrates that the lifespan prediction of electronic cards in NPPs can be successfully predicted with a few samples by combining the Weibull model and the Arrhenius model.This can help provide preventive maintenance recommendations for electronic cards.Finally,operation suggestions for the electronic card’s ambient temperature can be made by utilizing the temperature-life model.展开更多
基金supported by the Bureau of Frontier Sciences and Basic Research,Chinese Academy of Sciences(Grant No.QYJ-2025-0103)the National Natural Science Foundation of China(Grant Nos.42441834,42241105,42441825,and 42203048)the Key Research Program of the Institute of Geology and Geophysics,Chinese Academy of Sciences(Grant No.IGGCAS-202401).
文摘As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing planetary habitability and the search for extraterrestrial life.The integrated measurement of N_(2)and argon(Ar)isotopes by using noble gas mass spectrometry represents a state-of-the-art technique for such investigations.To support the growing demands of planetary science research in China,we have developed a high-efficiency,high-precision method for the integrated analysis of N_(2)and Ar isotopes.This was achieved by enhancing gas extraction and purification systems and integrating them with a static noble gas mass spectrometer.This method enables integrated N_(2)-Ar isotope measurements on submilligram samples,significantly improving sample utilization and reducing the impact of sample heterogeneity on volatile analysis.The system integrates CO_(2)laser heating,a modular two-stage Zr-Al getter pump,and a CuO furnace-based purification process,effectively reducing background levels(N_(2)blank as low as 0.35×10^(−6)cubic centimeters at standard temperature and pressure[ccSTP]).Analytical precision is ensured through calibration with atmospheric air and CO corrections.To validate the reliability of the method,we performed N_(2)-Ar isotope analyses on the Allende carbonaceous chondrite,one of the most extensively studied meteorites internationally.The measured N_(2)concentrations range from 19.2 to 29.8 ppm,withδ15N values between−44.8‰and−33.0‰.Concentrations of 40Ar,36Ar,and 38Ar are(12.5-21.1)×10^(−6)ccSTP/g,(90.9-150.3)×10^(−9)ccSTP/g,and(19.2-30.7)×10^(−9)ccSTP/g,respectively.These values correspond to cosmic-ray exposure ages of 4.5-5.7 Ma,consistent with previous reports.Step-heating experiments further reveal distinct release patterns of N and Ar isotopes,as well as their associations with specific mineral phases in the meteorite.In summary,the combined N_(2)-Ar isotopic system offers significant advantages for tracing volatile sources in extraterrestrial materials and will provide essential analytical support for upcoming Chinese planetary missions,such as Tianwen-2.
文摘Grid-connected current control is one.of the important control schemes in distributed generation systems.A lot of control methods have been developed,such as hysteresis control,dead-beat control,one-cycle control,etc.Hysteresis current control has the advantages of simplicity,robustness and good large-signal response.Unfortunately,the switching frequency of the converter using hysteresis current control varies according to the parameters of the bus voltage,the filter inductor and the bandwidth.Increasing the hysteresis bandwidth and the filter inductance can reduce the switching frequency.
基金financially supported by the National High Technology Research and Development Program of China (No.2013AA065201)Chinese Academy of Sciences (Nos.XDB14020101, YSW2013A01, YSW2013B01)
文摘Organophosphate esters（OPEs）, used as flame retardants and plasticizers, are widely present in environmental waters. Development of accurate determination methods for trace OPEs in water is urgent for understanding the fate and risk of this class of emerging pollutants. However, the wide use of OPEs in experimental materials results in blank interference, which influences the accuracy of analytical results. In the present work, blank contamination and recovery of pretreatment procedures for analysis of OPEs in water samples were systematically examined for the first time. Blank contaminations were observed in filtration membranes, glass bottles, solid phase extraction cartridges, and nitrogen blowing instruments. These contaminations could be as high as 6.4–64 ng/L per treatment. Different kinds of membranes were compared in terms of contamination levels left after common glassware cleaning, and a special wash procedure was proposed to eliminate the contamination from membranes. Meanwhile, adsorption of highly hydrophobic OPEs on the inside wall of glass bottles was found to be 42.4%–86.1%, which was the primary cause of low recoveries and was significantly reduced by an additional washing step with acetonitrile. This work is expected to provide guidelines for the establishment of analysis methods for OPEs in aqueous samples.
基金supported by sub-project of National Major Scientific and Technological Special Project of China for ‘Significant New Drugs Development’[2015ZX09501008-004]
文摘Objective To develop methods for determining a suitable sample size for bioequivalence assessment of generic topical ophthalmic drugs using crossover design with serial sampling schemes.Methods The power functions of the Fieller-type confidence interval and the asymptotic confidence interval in crossover designs with serial-sampling data are here derived.Simulation studies were conducted to evaluate the derived power functions.Results Simulation studies show that two power functions can provide precise power estimates when normality assumptions are satisfied and yield conservative estimates of power in cases when data are log-normally distributed.The intra-correlation showed a positive correlation with the power of the bioequivalence test.When the expected ratio of the AUCs was less than or equal to 1, the power of the Fieller-type confidence interval was larger than the asymptotic confidence interval.If the expected ratio of the AUCs was larger than 1, the asymptotic confidence interval had greater power.Sample size can be calculated through numerical iteration with the derived power functions.Conclusion The Fieller-type power function and the asymptotic power function can be used to determine sample sizes of crossover trials for bioequivalence assessment of topical ophthalmic drugs.
基金supported by the National Natural Science Foundation of China(61902263)the National Key Research and Development Program of China(2018YFB0804103).
文摘Steganography techniques,such as audio steganography,have been widely used in covert communication.However,the deep neural network,especially the convolutional neural network(CNN),has greatly threatened the security of audio steganography.Besides,existing adversarial attacks-based countermeasures cannot provide general perturbation,and the trans-ferability against unknown steganography detection methods is weak.This paper proposes a cover enhancement method for audio steganography based on universal adversarial perturbations with sample diversification to address these issues.Universal adversarial perturbation is constructed by iteratively optimizing adversarial perturbation,which applies adversarial attack tech-niques,such as Deepfool.Moreover,the sample diversification strategy is designed to improve the transferability of adversarial perturbations in black-box attack scenarios,where two types of common audio-processing operations are considered,including noise addition and moving picture experts group audio layer III(MP3)compression.Furthermore,the perturbation ensemble method is applied to further improve the attacks’transferability by integrating perturbations of different detection networks with heterogeneous architec-tures.Consequently,the single universal adversarial perturbation can enhance different cover audios against a CNN-based detection network.Extensive experiments have been conducted,and the results demonstrate that the average missed-detection probabilities of the proposed method are higher than those of the state-of-the-art methods by 7.3%and 16.6%for known and unknown detection networks,respectively.It verifies the efficiency and transferability of the proposed methods for the cover enhancement of audio steganography.
基金the Natural Science Foundation of Chongqing(cstc2021jcyj-msxmX0583)Maize Germplasm Resources Protection Project,and Fundamental Research Funds for the Central Universities of Southwest University(SWU118087,XDJK2017C031,XDJK2017D072)。
文摘Kernel size-related traits,including kernel length,kernel width,and kernel thickness,are critical components in determining yield and kernel quality in maize(Zea mays L.).Dissecting the phenotypic characteristics of these traits,and discovering the candidate chromosomal regions for these traits,are of potential importance for maize yield and quality improvement.In this study,a total of 139 F2:3 family lines derived from EHel and B73,a distinct line with extremely low ear height(EHel),was used for phenotyping and QTL mapping of three kernel sizerelated traits,including 10-kernel length(KL),10-kernel width(KWid),and 10-kernel thickness(KT).The results showed that only one QTL for KWid,i.e.,qKWid9 on Chr9,with a phenotypic variation explained(PVE)of 13.4%was detected between SNPs of AX-86298371 and AX-86298372,while no QTLs were detected for KL and KT across all 10 chromosomes.Four bulked groups of family lines,i.e.,Groups I to IV,were constructed with F2:3 family lines according to the phenotypic comparisons of KWid between EHel and B73.Among these four groups,Group I possessed a significantly lower KWid than EHel(P=0.0455),Group II was similar to EHel(P=0.34),while both Group III and Group IV were statistically higher than EHel(P<0.05).Besides,except Group IV exhibited a similar KWid to B73(P=0.11),KWid of Groups I to III were statistically lower than B73(P<0.00).By comparing the bulked genotypes of the four groups to EHel and B73,a stable chromosomal region on Chr9 between SNPs of AX-86298372 to AX-86263154,entirely covered by qKWid9,was identified to link KWid with the positive allele of increasing phenotypic effect to KWid from B73,similar to that of qKWid9.A large amount of enzyme activity and macromolecule binding-related genes were annotated within this chromosomal region,suggesting qKWid9 as a potential QTL for KWid in maize.
基金the Key National Natural Science Foundation of China(No.U1864211)the National Natural Science Foundation of China(No.11772191)the Natural Science Foundation of Shanghai(No.21ZR1431500)。
文摘Industrial data mining usually deals with data from different sources.These heterogeneous datasets describe the same object in different views.However,samples from some of the datasets may be lost.Then the remaining samples do not correspond one-to-one correctly.Mismatched datasets caused by missing samples make the industrial data unavailable for further machine learning.In order to align the mismatched samples,this article presents a cooperative iteration matching method(CIMM)based on the modified dynamic time warping(DTW).The proposed method regards the sequentially accumulated industrial data as the time series.Mismatched samples are aligned by the DTW.In addition,dynamic constraints are applied to the warping distance of the DTW process to make the alignment more efficient.Then a series of models are trained with the cumulated samples iteratively.Several groups of numerical experiments on different missing patterns and missing locations are designed and analyzed to prove the effectiveness and the applicability of the proposed method.
基金financially supported by Shenzhen Science and Technology Program(Nos.JSGG20220831105002005 and KJZD20231025152759002)Support from the National Natural Science Foundation of China(Nos.52374357 and 523B2101)funded by the Shared Voyages Project for Deep-sea and Abyss Scientific Research and Equipment Sea Trials of Hainan Deep-Sea Technology Innovation Center(No.DSTIC-GXHC-2022002)。
文摘Marine gas hydrates are highly sensitive to temperature and pressure fluctuations,and deviations from in-situ conditions may cause irreversible changes in phase state,microstructure,and mechanical properties.However,conventional samplers often fail to maintain sealing and thermal stability,resulting in low sampling success rates.To address these challenges,an in-situ temperature-and pressure-preserved sampler for marine applications has been developed.The experimental results indicate that the selfdeveloped magnetically controlled pressure-preserved controller reliably achieves autonomous triggering and self-sealing,provides an initial sealing force of 83 N,and is capable of maintaining pressures up to 40 MPa.Additionally,a custom-designed intelligent temperature control chip and high-precision sensors were integrated into the sampler.Through the design of an optimized heat transfer structure,a temperature-preserved system was developed,achieving no more than a 0.3℃ rise in temperature within 2 h.The performance evaluation and sampling operations of the sampler were conducted at the Haima Cold Seep in the South China Sea,resulting in the successful recovery of hydrate maintained under in-situ pressure of 13.8 MPa and a temperature of 6.5℃.This advancement enables the acquisition of high-fidelity hydrate samples,providing critical support for the safe exploitation and scientific analysis of marine gas hydrate resources.
基金supported by he National Natural Science Foundation of China(Grant Nos.12304359,12304398,12404382,12234009,12274215,and 12427808)the China Postdoctoral Science Foundation(Grant No.2023M731611)+4 种基金the Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2023ZB717)Innovation Program for Quantum Science and Technology(Grant No.2021ZD0301400)Key R&D Program of Jiangsu Province(Grant No.BE2023002)Natural Science Foundation of Jiangsu Province(Grant Nos.BK20220759 and BK20233001)Program for Innovative Talents and Entrepreneurs in Jiangsu,and Key R&D Program of Guangdong Province(Grant No.2020B0303010001).
文摘As an emerging microscopic detection tool,quantum microscopes based on the principle of quantum precision measurement have attracted widespread attention in recent years.Compared with the imaging of classical light,quantum-enhanced imaging can achieve ultra-high resolution,ultra-sensitive detection,and anti-interference imaging.Here,we introduce a quantum-enhanced scanning microscope under illumination of an entangled NOON state in polarization.For the phase imager with NOON states,we propose a simple four-basis projection method to replace the four-step phase-shifting method.We have achieved the phase imaging of micrometer-sized birefringent samples and biological cell specimens,with sensitivity close to the Heisenberg limit.The visibility of transmittance-based imaging shows a great enhancement for NOON states.Besides,we also demonstrate that the scanning imaging with NOON states enables the spatial resolution enhancement of√N compared with classical measurement.Our imaging method may provide some reference for the practical application of quantum imaging and is expected to promote the development of microscopic detection.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272259 and 52005148).
文摘An intelligent diagnosis method based on self-adaptiveWasserstein dual generative adversarial networks and feature fusion is proposed due to problems such as insufficient sample size and incomplete fault feature extraction,which are commonly faced by rolling bearings and lead to low diagnostic accuracy.Initially,dual models of the Wasserstein deep convolutional generative adversarial network incorporating gradient penalty(1D-2DWDCGAN)are constructed to augment the original dataset.A self-adaptive loss threshold control training strategy is introduced,and establishing a self-adaptive balancing mechanism for stable model training.Subsequently,a diagnostic model based on multidimensional feature fusion is designed,wherein complex features from various dimensions are extracted,merging the original signal waveform features,structured features,and time-frequency features into a deep composite feature representation that encompasses multiple dimensions and scales;thus,efficient and accurate small sample fault diagnosis is facilitated.Finally,an experiment between the bearing fault dataset of CaseWestern ReserveUniversity and the fault simulation experimental platformdataset of this research group shows that this method effectively supplements the dataset and remarkably improves the diagnostic accuracy.The diagnostic accuracy after data augmentation reached 99.94%and 99.87%in two different experimental environments,respectively.In addition,robustness analysis is conducted on the diagnostic accuracy of the proposed method under different noise backgrounds,verifying its good generalization performance.
基金supported by grants from the National Natural Science Foundation of China(grant numbers:82370195,82270203,81770211)the Fundamental Research Funds for the Central Univer-sities(grant number:2022CDJYGRH-001)Chongqing Technology Innovation and Application Development Special Key Project(grant number:CSTB2024TIAD-KPX0031).
文摘Flow cytometry(FCM),characterized by its simplicity,rapid processing,multiparameter analysis,and high sen-sitivity,is widely used in the diagnosis,treatment,and prognosis of hematological malignancies.FCM testing of tissue samples not only aids in diagnosing and classifying hematological cancers,but also enables the detection of solid tumors.Its ability to detect numerous marker parameters from small samples is particularly useful when dealing with limited cell quantities,such as in fine-needle biopsy samples.This attribute not only addresses the challenge posed by small sample sizes,but also boosts the sensitivity of tumor cell detection.The significance of FCM in clinical and pathological applications continues to grow.To standardize the use of FCM in detecting hematological malignant cells in tissue samples and to improve quality control during the detection process,experts from the Cell Analysis Professional Committee of the Chinese Society of Biotechnology jointly drafted and agreed upon this consensus.This consensus was formulated based on current literature and clinical practices of all experts across clinical,laboratory,and pathological fields in China.It outlines a comprehensive workflow of FCM-based assay for the detection of hematological malignancies in tissue samples,including report content,interpretation,quality control,and key considerations.Additionally,it provides recommendations on antibody panel designs and analytical approaches to enhancing FCM tests,particularly in cases with limited sample sizes.
文摘In the task of Facial Expression Recognition(FER),data uncertainty has been a critical factor affecting performance,typically arising from the ambiguity of facial expressions,low-quality images,and the subjectivity of annotators.Tracking the training history reveals that misclassified samples often exhibit high confidence and excessive uncertainty in the early stages of training.To address this issue,we propose an uncertainty-based robust sample selection strategy,which combines confidence error with RandAugment to improve image diversity,effectively reducing overfitting caused by uncertain samples during deep learning model training.To validate the effectiveness of the proposed method,extensive experiments were conducted on FER public benchmarks.The accuracy obtained were 89.08%on RAF-DB,63.12%on AffectNet,and 88.73%on FERPlus.
基金supported by the National Natural Science Foundation of China under Grants 62476138 and 42375016.
文摘Continuous control protocols are extensively utilized in traditional MASs,in which information needs to be transmitted among agents consecutively,therefore resulting in excessive consumption of limited resources.To decrease the control cost,based on ISC,several LFC problems are investigated for second-order MASs without and with time delay,respectively.Firstly,an intermittent sampled controller is designed,and a sufficient and necessary condition is derived,under which state errors between the leader and all the followers approach zero asymptotically.Considering that time delay is inevitable,a new protocol is proposed to deal with the time-delay situation.The error system’s stability is analyzed using the Schur stability theorem,and sufficient and necessary conditions for LFC are obtained,which are closely associated with the coupling gain,the system parameters,and the network structure.Furthermore,for the case where the current position and velocity information are not available,a distributed protocol is designed that depends only on the sampled position information.The sufficient and necessary conditions for LFC are also given.The results show that second-order MASs can achieve the LFC if and only if the system parameters satisfy the inequalities proposed in the paper.Finally,the correctness of the obtained results is verified by numerical simulations.
基金supported by the ERC Advanced Grant QU-BOSS(QUantum advantage via nonlinear BOSon Sampling,Grant No.884676)by ICSC-Centro Nazionale di Ricerca in High Performance Computing,Big Data,and Quantum Computing,funded by the European Union-NextGenerationEU.D.S.acknowledges Thales Alenia Space Italia for supporting the PhD fellowship.N.S.acknowledges funding from Sapienza Universitàdi Roma via Bando Ricerca 2020:Progetti di Ricerca Piccoli,Project No.RP120172B8A36B37.
文摘Quantum photonic processors are emerging as promising platforms to prove preliminary evidence of quantum computational advantage toward the realization of universal quantum computers.In the context of nonuniversal noisy intermediate quantum devices,photonic-based sampling machines solving the Gaussian boson sampling(GBS)problem currently play a central role in the experimental demonstration of quantum computational advantage.A relevant issue is the validation of the sampling process in the presence of experimental noise,such as photon losses,which could undermine the hardness of simulating the experiment.We test the capability of a validation protocol that exploits the connection between GBS and graph perfect match counting to perform such an assessment in a noisy scenario.In particular,we use as a test bench the recently developed machine Borealis,a large-scale sampling machine that has been made available online for external users,and address its operation in the presence of noise.The employed approach to validation is also shown to provide connections with the open question on the effective advantage of using noisy GBS devices for graph similarity and isomorphism problems and thus provides an effective method for certification of quantum hardware.
文摘In this paper,an image processing algorithm which is able to synthesize material textures of arbitrary shapes is proposed.The presented approach uses an arbitrary image to construct a structure layer of the material.The resulting structure layer is then used to constrain the material texture synthesis.The field of second-moment matrices is used to represent the structure layer.Many tests with various constraint images are conducted to ensure that the proposed approach accurately reproduces the visual aspects of the input material sample.The results demonstrate that the proposed algorithm is able to accurately synthesize arbitrary-shaped material textures while respecting the local characteristics of the exemplar.This paves the way toward the synthesis of 3D material textures of arbitrary shapes from 2D material samples,which has a wide application range in virtual material design and materials characterization.
基金Supported by the National Natural Science Foundation of China(Grant No.12071175)。
文摘In this paper, we use sample average approximation with adaptive multiple importance sampling to explore moderate deviations for the optimal values. Utilizing the moderate deviation principle for martingale differences and an appropriate Delta method, we establish a moderate deviation principle for the optimal value. Moreover, for a functional form of stochastic programming, we obtain a functional moderate deviation principle for its optimal value.
基金sponsored by the National Natural Science Foundation of China Grant No.62271302the Shanghai Municipal Natural Science Foundation Grant 20ZR1423500.
文摘Large amounts of labeled data are usually needed for training deep neural networks in medical image studies,particularly in medical image classification.However,in the field of semi-supervised medical image analysis,labeled data is very scarce due to patient privacy concerns.For researchers,obtaining high-quality labeled images is exceedingly challenging because it involves manual annotation and clinical understanding.In addition,skin datasets are highly suitable for medical image classification studies due to the inter-class relationships and the inter-class similarities of skin lesions.In this paper,we propose a model called Coalition Sample Relation Consistency(CSRC),a consistency-based method that leverages Canonical Correlation Analysis(CCA)to capture the intrinsic relationships between samples.Considering that traditional consistency-based models only focus on the consistency of prediction,we additionally explore the similarity between features by using CCA.We enforce feature relation consistency based on traditional models,encouraging the model to learn more meaningful information from unlabeled data.Finally,considering that cross-entropy loss is not as suitable as the supervised loss when studying with imbalanced datasets(i.e.,ISIC 2017 and ISIC 2018),we improve the supervised loss to achieve better classification accuracy.Our study shows that this model performs better than many semi-supervised methods.
文摘Geological samples often contain significant amounts of iron,which,although not typically the target element,can substantially interfere with the analysis of other elements of interest.To mitigate these interferences,amidoximebased radiation grafted adsorbents have been identified as effective for iron removal.In this study,an amidoximefunctionalized,radiation-grafted adsorbent synthesized from polypropylene waste(PPw-g-AO-10)was employed to remove iron from leached geological samples.The adsorption process was systematically optimized by investigating the effects of pH,contact time,adsorbent dosage,and initial ferric ion concentration.Under optimal conditions-pH1.4,a contact time of 90 min,and an initial ferric ion concentration of 4500 mg/L-the adsorbent exhibited a maximum iron adsorption capacity of 269.02 mg/g.After optimizing the critical adsorption parameters,the adsorbent was applied to the leached geological samples,achieving a 91%removal of the iron content.The adsorbent was regenerated through two consecutive cycles using 0.2 N HNO_(3),achieving a regeneration efficiency of 65%.These findings confirm the efficacy of the synthesized PPw-g-AO-10 as a cost-effective and eco-friendly adsorbent for successfully removing iron from leached geological matrices while maintaining a reasonable degree of reusability.
基金Supported by National Natural Science Foundation of China(Grant No.51675040)。
文摘The electromagnetic pulse valve,as a key component in baghouse dust removal systems,plays a crucial role in the performance of the system.However,despite the promising results of intelligent fault diagnosis methods based on extensive data in diagnosing electromagnetic valves,real-world diagnostic scenarios still face numerous challenges.Collecting fault data for electromagnetic pulse valves is not only time-consuming but also costly,making it difficult to obtain sufficient fault data in advance,which poses challenges for small sample fault diagnosis.To address this issue,this paper proposes a fault diagnosis method for electromagnetic pulse valves based on deep transfer learning and simulated data.This method achieves effective transfer from simulated data to real data through four parameter transfer strategies,which combine parameter freezing and fine-tuning operations.Furthermore,this paper identifies a parameter transfer strategy that simultaneously fine-tunes the feature extractor and classifier,and introduces an attention mechanism to integrate fault features,thereby enhancing the correlation and information complementarity among multi-sensor data.The effectiveness of the proposed method is evaluated through two fault diagnosis cases under different operating conditions.In this study,small sample data accounted for 7.9%and 8.2%of the total dataset,and the experimental results showed transfer accuracies of 93.5%and 94.2%,respectively,validating the reliability and effectiveness of the method under small sample conditions.
基金the Major Scientific Instrument Research of National Natural Science Foundation of China(No.61627810)the National Science and Technology Major Program of China(No.2018YFB1305003)。
文摘A lifespan prediction model was developed based on a few samples to provide decision-making information for operation and maintenance,as well as improve the economy and safety of nuclear power plant(NPP)operations.This paper applies a Weibull model to forecast the lifespan of electronic cards with a few samples in NPPs.Relationship between the lifespan prediction of electronic cards and the ambient temperature is revealed using the Arrhenius equation.Censored samples are used to compensate for the lack of fault electronic card data.Scale parameter and shape parameter of the Weibull model are optimized by adjusting the weight ratio between the censored data and the fault data.Characteristic life is then obtained using the rank regression fitting equation.Parameters of the Arrhenius equation can be calculated by dividing the samples into groups according to the ambient temperature.A case study of the intermediate range high-voltage electric card of ex-core neutron detectors demonstrates that the lifespan prediction of electronic cards in NPPs can be successfully predicted with a few samples by combining the Weibull model and the Arrhenius model.This can help provide preventive maintenance recommendations for electronic cards.Finally,operation suggestions for the electronic card’s ambient temperature can be made by utilizing the temperature-life model.
