Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive ...Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive current is expected to be as wide as possible to be applied to different kinds of lasers. In this paper, a high current laser driver for the superluminescent light emitting diode （SLED） is presented, which is used in the optic fiber gyro embedded by a 0.35 μm bipolar complementary metal-oxide-semiconductor transistor （BiCMOS） process. The laser driver provides automatic power control and certain value of current determined by the external resister. The system is based on the optic-electric feedback theory and uses the closed-loop control technique to maintain the drive current stable. The system is capable of producing stable current ranges from 4 mA to 200 mA when the value of external resister changes.展开更多
An integrated single-inductor dual-output （SIDO） switching DC-DC converter is presented. The outputs are specified with 1.2 V/400 mA and 1.8 V/200 mA. A decoupling small signal model is proposed to analyze the multi...An integrated single-inductor dual-output （SIDO） switching DC-DC converter is presented. The outputs are specified with 1.2 V/400 mA and 1.8 V/200 mA. A decoupling small signal model is proposed to analyze the multi-loop system and to design the on-chip compensators. An average current control mode is introduced with lossless, continuous current detection. The converter has been fabricated in a 0.25μm 2P4M CMOS process. The power efficiency is 86% at a total output power of 840 mW while the output ripples are about 40 mV at an oscillator frequency of 600 kHz.展开更多
针对电动汽车800 V高压平台的多电机驱动系统逆变器开关器件数量较多、控制策略复杂等问题,提出1种十五开关三电平双输出逆变器,通过器件复用简化了逆变器拓扑结构、降低了逆变器成本。首先,对所提逆变器拓扑结构及工作原理进行了详细...针对电动汽车800 V高压平台的多电机驱动系统逆变器开关器件数量较多、控制策略复杂等问题,提出1种十五开关三电平双输出逆变器,通过器件复用简化了逆变器拓扑结构、降低了逆变器成本。首先,对所提逆变器拓扑结构及工作原理进行了详细的分析研究,总结了该逆变器的结构特点,给出了有效开关状态及最大电压应力分析,为开关器件选型及系统设计提供了理论基础。然后,提出了1种单桥臂独立模型预测电流控制策略,建立了单桥臂双输出端口电流的预测模型,在实现三桥臂独立预测控制与单桥臂双输出电流综合最优控制前提下,有效降低了预测运算量。最后,通过Typhoon HIL 402平台对所提逆变器及其控制策略的正确性及有效性进行实验验证。展开更多
文摘Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive current is expected to be as wide as possible to be applied to different kinds of lasers. In this paper, a high current laser driver for the superluminescent light emitting diode （SLED） is presented, which is used in the optic fiber gyro embedded by a 0.35 μm bipolar complementary metal-oxide-semiconductor transistor （BiCMOS） process. The laser driver provides automatic power control and certain value of current determined by the external resister. The system is based on the optic-electric feedback theory and uses the closed-loop control technique to maintain the drive current stable. The system is capable of producing stable current ranges from 4 mA to 200 mA when the value of external resister changes.
文摘An integrated single-inductor dual-output （SIDO） switching DC-DC converter is presented. The outputs are specified with 1.2 V/400 mA and 1.8 V/200 mA. A decoupling small signal model is proposed to analyze the multi-loop system and to design the on-chip compensators. An average current control mode is introduced with lossless, continuous current detection. The converter has been fabricated in a 0.25μm 2P4M CMOS process. The power efficiency is 86% at a total output power of 840 mW while the output ripples are about 40 mV at an oscillator frequency of 600 kHz.
文摘针对电动汽车800 V高压平台的多电机驱动系统逆变器开关器件数量较多、控制策略复杂等问题,提出1种十五开关三电平双输出逆变器,通过器件复用简化了逆变器拓扑结构、降低了逆变器成本。首先,对所提逆变器拓扑结构及工作原理进行了详细的分析研究,总结了该逆变器的结构特点,给出了有效开关状态及最大电压应力分析,为开关器件选型及系统设计提供了理论基础。然后,提出了1种单桥臂独立模型预测电流控制策略,建立了单桥臂双输出端口电流的预测模型,在实现三桥臂独立预测控制与单桥臂双输出电流综合最优控制前提下,有效降低了预测运算量。最后,通过Typhoon HIL 402平台对所提逆变器及其控制策略的正确性及有效性进行实验验证。
