期刊文献+
共找到909篇文章
< 1 2 46 >
每页显示 20 50 100
An Ultra-Low Quiescent Current CMOS Low-Dropout Regulator with Small Output Voltage Variations 被引量:2
1
作者 Xin Cheng Yizhong Yang +2 位作者 Longjie Du Yang Chen Guangjun Xie 《Journal of Power and Energy Engineering》 2014年第4期477-482,共6页
An ultra-low quiescent current low-dropout regulator with small output voltage variations and improved load regulation is presented in this paper. It makes use of dynamically-biased shunt feedback as the buffer stage ... An ultra-low quiescent current low-dropout regulator with small output voltage variations and improved load regulation is presented in this paper. It makes use of dynamically-biased shunt feedback as the buffer stage and the LDO regulator can be stable for all load conditions. The proposed structure also employs a momentarily current-boosting circuit to reduce the output voltage to the normal value when output is switched from full load to no load. The whole circuit is designed in a 0.18 μm CMOS technology with a quiescent current of 550 nA. The maximum output voltage variation is less than 20 mV when used with 1 μF external capacitor. 展开更多
关键词 Ultra-Low Quiescent current Low-Dropout REGULATOR SMALL output VARIATIONS
在线阅读 下载PDF
Development of Surface Grating Distributed Feedback Quantum Cascade Laser for High Output Power and Low Threshold Current Density
2
作者 刘颖慧 张锦川 +3 位作者 江建民 孙素娟 李沛旭 刘峰奇 《Chinese Physics Letters》 SCIE CAS CSCD 2015年第2期60-62,共3页
We report on the room-temperature cascade laser (QCL) at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback (DFB) quantum optimization are used to decrease the thre... We report on the room-temperature cascade laser (QCL) at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback (DFB) quantum optimization are used to decrease the threshold current density and to increase the output power. For a high-reflectivity-coated 13-μm-wide and 4- mm-long laser, high wall-plug efficiency of 6% is obtained at 20℃ from a single facet producing over I W of ew output power. The threshold current density of DFB QCL is as low as 1.13kA/cm^2 at 10℃ and 1.34kA/cm2 at 30℃ in cw mode. Stable single-mode emission with a side-mode suppression ratio of about 30 dB is observed in tile working temperature range of 20-50℃. 展开更多
关键词 DFB QCL Development of Surface Grating Distributed Feedback Quantum Cascade Laser for High output Power and Low Threshold current Density
原文传递
开槽盘式磁力耦合器转矩特性分析
3
作者 杨超君 王凯旋 +1 位作者 郭亚飞 朱志成 《机械传动》 北大核心 2026年第1期1-8,共8页
【目的】开槽盘式磁力耦合器导体盘为开槽结构,使其在运动过程中产生的磁路变得更加复杂多变,增加了电磁转矩的计算难度。为此,建立一种较为可靠的开槽盘式磁力耦合器电磁转矩预测模型,研究其转矩特性。【方法】以一台18极16槽的盘式磁... 【目的】开槽盘式磁力耦合器导体盘为开槽结构,使其在运动过程中产生的磁路变得更加复杂多变,增加了电磁转矩的计算难度。为此,建立一种较为可靠的开槽盘式磁力耦合器电磁转矩预测模型,研究其转矩特性。【方法】以一台18极16槽的盘式磁力耦合器为研究对象开展相关分析。首先,运用等效磁路法,将相邻磁路及自身磁路共同作用产生的感应涡流作为一条支路,引入到新的等效磁路模型中;考虑三维端部效应并结合安培定律和基尔霍夫定律,推导了磁力耦合器的气隙磁通和输出转矩表达式;其次,运用有限元仿真软件对开槽盘式磁力耦合器进行模拟分析,得到气隙磁场和感应涡流的分布规律,以及受相邻涡流影响下输出转矩随气隙厚度、转速差的变化规律;最后,搭建相应的试验平台,对理论计算及有限元仿真结果进行了验证。【结果】结果表明,理论计算、有限元仿真与试验的结果基本一致。提出的理论模型具有较高的准确性,能够为开槽盘式磁力耦合器的转矩性能研究提供较为准确的预测模型。 展开更多
关键词 开槽盘式磁力耦合器 等效磁路法 输出转矩 相邻涡流 气隙磁场
在线阅读 下载PDF
海流对半潜型浮式风力发电机运动响应及发电功率的影响
4
作者 刘江 曹越 +2 位作者 华涛 翁培奋 王明勇 《热力发电》 北大核心 2026年第1期73-84,共12页
海上浮式风机在海洋环境中会受到多种因素的影响,这些海洋环境会显著改变浮式风机的运动状态,进而使风机的发电性能发生改变。研究了不同风浪条件下海流对半潜型浮式风力发电机运动响应的影响,并比较分析了海流对风力机发电功率的影响... 海上浮式风机在海洋环境中会受到多种因素的影响,这些海洋环境会显著改变浮式风机的运动状态,进而使风机的发电性能发生改变。研究了不同风浪条件下海流对半潜型浮式风力发电机运动响应的影响,并比较分析了海流对风力机发电功率的影响。选取半潜型浮式平台和5 MW风力机作为研究对象,采用OpenFAST、FAST to AQWA(F2A)和AQWA软件进行仿真。首先,在稳态风规则波、稳态风不规则波和湍流风不规则波3种环境条件下,分别计算了浮式平台的纵荡、垂荡、纵摇运动响应以及发电功率;然后,计算添加海流因素之后上述海况下的运动响应和发电功率。结果表明:海流主要对纵荡运动产生较大影响,最大差异达到13%,但对垂荡运动和纵摇运动的影响相对较小;在3种环境条件下的发电功率计算中,海流对风力发电机的平均发电功率和最大发电功率没有影响,工况间的差异小于1%,但在较复杂的工况下,发电功率的标准偏差差异较小,海流不会对发电功率的变化震荡程度产生影响。 展开更多
关键词 浮式风机 半潜式 海流 发电功率
在线阅读 下载PDF
Input-parallel output-parallel configuration of boost half bridge DC-DC converter with control strategy
5
作者 SOOMRO Amir Mahmood KHAHRO Shahnawaz Farhan +2 位作者 KHASKHELI Murad Ali 廖晓钟 FARHAN Manzoor 《Journal of Beijing Institute of Technology》 EI CAS 2014年第1期47-52,共6页
The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel (IPOP) converter consists of multiple boost ... The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel (IPOP) converter consists of multiple boost half bridge (BHB) DC-DC converter modules which are connected in par- allel at the input and output side. This kind of converter is an attractive solution for high power ap- plications. The correlation between input current sharing (ICS) and output current sharing (OCS) of the IPOP converter basic modules is described. Two loop control strategies, consisting of input cur- rent loop and output voltage loop, have been developed to achieve equal ICS and OCS in this present work. The control strategy for the IPOP configuration of boost haft bridge DC-DC converter has been verified for different load conditions (half load and full load), The IPOP system proposed here is comprising of two modules but it can be extended to three or more. The performance of the pro- posed system along with the control strategy is verified by simulation in MATLAB using Simpower tool. Finally the satisfactory simulation results are obtained. 展开更多
关键词 boost half bridge BHB input current sharing ICS input-parallel output-parallel(IPOP) output current sharing (OCS)
在线阅读 下载PDF
DOCCII-based electronically tunable current-mode biquadratic filters
6
作者 WangWeidong 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2005年第1期37-41,共5页
A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable c... A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable current gain factors of the DOCCII. Based on the principles upon which the general biquadratic filter was constructed, a universal electronically tunable current-mode filter is proposed which implements the low-pass, high-pass, band-pass, band-suppress and all-pass second order transfer functions simultaneously. The PSPICE simulations of frequency responses of second-order filter of are also given. 展开更多
关键词 current-mode biquadratic filters duo-output current conveyor operational transconductance amplifiers.
在线阅读 下载PDF
一种多量程轨到轨高压输出DAC设计
7
作者 肖博兮 蒋玉贺 《微处理机》 2026年第1期59-64,共6页
在0.18μm 60 V BCD工艺下,设计并实现了一种高压轨到轨输出的数模转换器电路(DAC)。该电路在12位分辨率下展现出良好的单调性。基于折叠共源共栅结构,提出了一种新型高压轨到轨输出运算放大器。其第一级采用增益自举技术,显著提升了运... 在0.18μm 60 V BCD工艺下,设计并实现了一种高压轨到轨输出的数模转换器电路(DAC)。该电路在12位分辨率下展现出良好的单调性。基于折叠共源共栅结构,提出了一种新型高压轨到轨输出运算放大器。其第一级采用增益自举技术,显著提升了运算放大器的速度与增益;第二级则运用Class AB架构,实现了轨到轨输出功能。通过灵活配置输出模式,用户可自由选择40、20、10 V三个输出量程范围。DAC输出级具备驱动±30 mA电流的能力,有效减少了对外挂运放的依赖。对DAC电路进行了全面的仿真与验证,仿真结果表明:DAC的积分非线性(INL)小于|0.3|LSB,微分非线性(DNL)小于|0.3|LSB,建立时间不超过1μs。在输入1 MHz正弦波信号时,信噪失真比(SNDR)达到72.54 dB,总谐波失真(THD)低至-80.45 dB,有效位数(ENOB)高达11.76 bit。 展开更多
关键词 BCD工艺 高压数模转换器 R-2R电阻阵列 轨到轨输出
在线阅读 下载PDF
一种大电流低压差线性稳压器
8
作者 文传瑶 钟琼丽 +1 位作者 马奎 杨发顺 《半导体技术》 北大核心 2026年第1期45-56,76,共13页
基于40 V双极型工艺设计了一种输出电压可调的大电流、低压差线性稳压器(LDO)。在带隙基准源电路中引入二极管修调技术,有效减小了工艺波动的影响;采用达林顿结构的横向pnp功率晶体管作为输出调整管,确保大电流条件下LDO具有较低的输入... 基于40 V双极型工艺设计了一种输出电压可调的大电流、低压差线性稳压器(LDO)。在带隙基准源电路中引入二极管修调技术,有效减小了工艺波动的影响;采用达林顿结构的横向pnp功率晶体管作为输出调整管,确保大电流条件下LDO具有较低的输入-输出电压差;设计了过温、限流、过压以及防反接4种保护电路,保证电路的稳定运行。基于Cadence Spectre进行电路设计和仿真,后仿结果表明电路可在输入电压为5.4~26 V、温度为-55~125℃下正常运行;实现5~20 V的可调输出电压;当输出电压为5 V、输出电流为1 A时,输入-输出电压差低至375 mV;线性调整率及负载调整率分别为0.375 mV/V和4.02 mV/A。 展开更多
关键词 低压差线性稳压器(LDO) 大电流 达林顿调整管 二极管修调 输出电压可调
原文传递
Laser Driver for Optic Fiber Gyro with 4 mA to 200 mA Drive Current
9
作者 Fei-Xiang Chen Zong-Min Wang +1 位作者 Ying Kong Xin-Mang Peng 《Journal of Electronic Science and Technology》 CAS 2013年第3期277-280,共4页
Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive ... Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive current is expected to be as wide as possible to be applied to different kinds of lasers. In this paper, a high current laser driver for the superluminescent light emitting diode (SLED) is presented, which is used in the optic fiber gyro embedded by a 0.35 μm bipolar complementary metal-oxide-semiconductor transistor (BiCMOS) process. The laser driver provides automatic power control and certain value of current determined by the external resister. The system is based on the optic-electric feedback theory and uses the closed-loop control technique to maintain the drive current stable. The system is capable of producing stable current ranges from 4 mA to 200 mA when the value of external resister changes. 展开更多
关键词 Index Terms---Average power control calibratedreference current high current output laser driver.
在线阅读 下载PDF
A High Power Factor Rectifier Based on Buck Converter Operating in Discontinuous Inductor Current Mode
10
作者 Jianbo Yang Weiping Zhang +1 位作者 Faris Al-Naemi Xiaoping Chen 《Energy and Power Engineering》 2013年第4期842-849,共8页
By adding a suitable LC filter to the input of a Buck converter, a high-power-factor buck converter is proposed. The converter can operate in the discontinuous-output-current mode operation. A Buck converter in this o... By adding a suitable LC filter to the input of a Buck converter, a high-power-factor buck converter is proposed. The converter can operate in the discontinuous-output-current mode operation. A Buck converter in this operation mode features simple control as the constant duty cycle PWM used. The operation condition of the converter is studied. The validity of analysis is verified by Simulation and Experimental results. 展开更多
关键词 Discontinuous-output-current BUCK Converter Power Factor Correction
在线阅读 下载PDF
Influence of Additional Device on Performance of the Marine Current Turbine
11
作者 Baoling Cui Zhiwei Song +2 位作者 Yuliang Zhang Yingzi Jin Yonggang Lin 《Open Journal of Fluid Dynamics》 2012年第4期305-310,共6页
To investigate the influence of additional device on the flow in marine current turbine, two additional devices for ma- rine current turbine including short diffuser and long diffuser types are studied based on the te... To investigate the influence of additional device on the flow in marine current turbine, two additional devices for ma- rine current turbine including short diffuser and long diffuser types are studied based on the test data of original marine current turbine. The results of numerical simulation show that the additional device with flange structure, compared to marine current turbine without additional device, can obtain more output power. However, it brings the inhomogeneity of additional device force as the increasing of effective output power. At same time, due to existence of the flange, two karman vortices are found behind the flange. The low pressure region produced by additional device and flange struc- ture can speed up the flow around the marine current turbine, so as to improve the output power. 展开更多
关键词 MARINE current TURBINE Additional DEVICE output Power Karman VORTEX
暂未订购
全超导托卡马克核聚变发电装置快控电源的改进灰色预测滑模电流控制
12
作者 黄海宏 陈昭 王海欣 《电工技术学报》 北大核心 2025年第16期5317-5329,共13页
全超导托卡马克核聚变发电装置(EAST)快控电源是实现可控核聚变中等离子体垂直位移控制的重要装置。EAST快控电源采用多个H桥逆变支路并联工作模式,电源的总输出电流对参考电流的快速跟踪控制直接影响等离子体的平衡控制,而各个并联支... 全超导托卡马克核聚变发电装置(EAST)快控电源是实现可控核聚变中等离子体垂直位移控制的重要装置。EAST快控电源采用多个H桥逆变支路并联工作模式,电源的总输出电流对参考电流的快速跟踪控制直接影响等离子体的平衡控制,而各个并联支路的输出电流一致性对支路稳定工作十分重要。为加快EAST快控电源输出电流动态响应速度和保证各个支路电流平衡,该文提出一种改进灰色预测新型快速变幂次趋近率滑模控制方法,实现EAST快控电源输出电流的良好控制。为加快输出电流响应速度,在总输出电流反馈环节加入改进灰色预测,根据输出电流的凹凸性和积分思想对灰色预测背景值进行重构,将预测值加入到原始序列替换旧信息以实现滚动预测,可以有效提高输出电流的预测精度。设计以总电流跟踪参考电流和支路电流均衡为控制目的滑模面,提出一种新型快速变幂次趋近率以加快滑模系统的收敛速度。仿真和实验验证了提出的控制方法对比其他传统控制方法具有更好的支路电流一致性和更快的输出电流响应速度。 展开更多
关键词 全超导托卡马克核聚变发电装置(EAST)快控电源 输出电流 灰色预测 滑模控制
在线阅读 下载PDF
Very Low Power,Low Voltage,High Accuracy,and High Performance Current Mirror
13
作者 Hassan Faraji Baghtash Khalil Monfaredi Ahmad Ayatollahi 《Journal of Electronic Science and Technology》 CAS 2011年第3期211-215,共5页
A novel low power and low voltage current mirror with a very low current copy error is presented and the principle of its operation is discussed. In this circuit, the gain boosting regulated cascode scheme is used to ... A novel low power and low voltage current mirror with a very low current copy error is presented and the principle of its operation is discussed. In this circuit, the gain boosting regulated cascode scheme is used to improve the output resistance, while using inverter as an amplifier. The simulation results with HSPICE in TSMC 0.18 μm CMOS technology are given, which verify the high performance of the proposed structure. Simulation results show an input resistance of 0.014 Ω and an output resistance of 3 GΩ. The current copy error is favorable as low as 0.002% together with an input (the minimum input voltage of Vin,min- 0.24 V) and an output (the minimum output voltage of Vout,min~ 0.16 V) compliances while working with the 1 V power supply and the 50 μA input current. The current copy error is near zero at the input current of 27 μA. It consumes only 76μW and introduces a very low output offset current of 50 pA. 展开更多
关键词 Index Terms--current mirror/source high accurate high output resistance low power low voltage.
在线阅读 下载PDF
速调管放大器输出腔的匹配理论
14
作者 何琥 雷禄容 李士锋 《强激光与粒子束》 北大核心 2025年第2期102-107,共6页
基于输出波导与腔体耦合的等效电路模型,对于任意的输出波导与腔体的耦合和任意的腔体和电子束参数,建立了速调管放大器输出腔的匹配理论即最大输出功率理论。建立了带有互感和感应电流等参数的输出腔等效电路模型,研究了输出微波功率... 基于输出波导与腔体耦合的等效电路模型,对于任意的输出波导与腔体的耦合和任意的腔体和电子束参数,建立了速调管放大器输出腔的匹配理论即最大输出功率理论。建立了带有互感和感应电流等参数的输出腔等效电路模型,研究了输出微波功率和反射功率,其中在研究反射功率时讨论了复耦合系数不等于1和等于1这两种情况下反射功率的表达式,推导了输出波导与带有电子束的输出腔任意的耦合和完全匹配这两种情形时输出微波功率和间隙电压关系的公式。推导了完全匹配时输出腔谐振频率与输出腔有载品质因数的表达式。匹配情形时从含有互感的等效电路模型推出的输出功率的计算结果与经典理论的计算结果近似相等。 展开更多
关键词 输出腔匹配理论 互感 感应电流 有载品质因数 复耦合系数
在线阅读 下载PDF
基于多分支MIMO深度学习的LCC-HVDC换流器阀电流波形反演研究
15
作者 陈仕龙 彭程 +2 位作者 魏荣智 杨毅 毕贵红 《电力科学与工程》 2025年第7期10-20,共11页
为使对换流阀工作状态的控制更加精确、抑制换相失败,提出了一种基于多分支多输入多输出(Multiple input multiple output,MIMO)深度学习的高压直流输电(Line commutated converter high voltage direct current,LCC-HVDC)换流器阀电流... 为使对换流阀工作状态的控制更加精确、抑制换相失败,提出了一种基于多分支多输入多输出(Multiple input multiple output,MIMO)深度学习的高压直流输电(Line commutated converter high voltage direct current,LCC-HVDC)换流器阀电流波形反演方案。对现行实际工程中常用的基于差流换相失败的检测方案进行仿真分析,发现检测结果存在滞后性。阀电流波形的反演模型,其输入特征量为三相交流电流、输出量为6个阀电流,属于MIMO的场景。为提取更多特征信息,基于Inception-ResNet结构、采用多种不同尺寸的卷积,设计多分支MIMO深度学习的换流器阀电流反演模型,并以三相电流作为模型输入,6个阀电流作为输出量,对多分支MIMO模型进行训练。最后,对阀电流的波形进行预测反演。仿真结果表明,多分支MIMO模型对阀电流波形的反演具有较好的适用性,反演结果的相关系数在0.9836以上、平均绝对误差在0.1284以下、且均方误差在0.0286以内,误差变化程度较低。 展开更多
关键词 多输入多输出 深度学习 换流器 阀电流 波形反演
在线阅读 下载PDF
Dual Mode-Multiple Output SEPIC Converter Integrated with Passive Ripple Cancelling Circuit for Standalone PV Energy Harvesting System
16
作者 Sharmin Sobhan Md. Ashraful Hoque +2 位作者 Golam Sarowar Tanvir Ahmad Abdul Mannan Farhan 《Journal of Power and Energy Engineering》 2016年第11期1-18,共18页
This document addresses an exhaustive standalone Photovoltaic (PV) energy harvesting system considering two crucial issues: system efficiency and cost effectiveness. It contributes a compact resolution with a combined... This document addresses an exhaustive standalone Photovoltaic (PV) energy harvesting system considering two crucial issues: system efficiency and cost effectiveness. It contributes a compact resolution with a combined feature of Dual Mode-Multiple Output (DMMO) associated with input ripple reduction technique. Control strategy incorporates with aspect of Maximum Power Point Tracking (MPPT) and output voltage levels regulation. A theoretical analysis is conducted to evaluate the effect of ripple current on PV power. Proposed dual mode converter achieves efficiency of 98.36% and 97.76% respectively for mode-1 and mode-2 operation. However, simulation is performed applying MATLAB/SIMULINK tools to analyze the feasibility of the recommended system. 展开更多
关键词 Photovoltaic Cell current Ripple Reduction Dual Mode Converter Multiple outputs Efficiency
在线阅读 下载PDF
适用于IIDG接入的配网电流保护改进方案研究
17
作者 戴志辉 刘钧溢 +1 位作者 柳梅元 宁志恒 《太阳能学报》 北大核心 2025年第6期367-375,共9页
分布式电源的接入改变了配电网结构、运行特性和故障特征,传统的配网电流保护方案由于未计及分布式电源的助增效应和新能源的出力波动特性,导致保护的灵敏度下降并且可能使保护失去选择性。为解决此类问题,提出计及逆变型分布式电源(II... 分布式电源的接入改变了配电网结构、运行特性和故障特征,传统的配网电流保护方案由于未计及分布式电源的助增效应和新能源的出力波动特性,导致保护的灵敏度下降并且可能使保护失去选择性。为解决此类问题,提出计及逆变型分布式电源(IIDG)出力波动的配网电流保护改进方案。该方案结合短路电流的迭代计算结果,在线调整上级线路Ⅱ、Ⅲ段以及下级线路I段定值,并提出修正后定值适用的IIDG出力波动范围求解方法,保证下游线路在IIDG出力波动时正确动作。最后在PSCAD/EMTDC平台搭建仿真模型并结合Matlab编程,验证该方案能有效提高上游保护Ⅱ、Ⅲ段灵敏度以及保证下游保护I段选择性,提升传统三段式电流保护的性能。 展开更多
关键词 故障电流 迭代法 储能 电流保护改进方案 出力波动
原文传递
单相全桥逆变器输出滤波器设计方法研究 被引量:1
18
作者 陈济民 王孙清 +5 位作者 谢仁和 招聪 李彬彬 潘琼文 徐纪伟 彭晗 《船电技术》 2025年第7期21-27,共7页
基于LC输出滤波器的单相全桥逆变器大量应用于船舶微电网以及不间断电源等场景中,将直流电转换为交流电供给单相交流负载。目前LC滤波器设计方法未兼顾单次和总谐波含量;且缺少综合考虑多方面性能指标的解析设计方法。本文基于输出电压... 基于LC输出滤波器的单相全桥逆变器大量应用于船舶微电网以及不间断电源等场景中,将直流电转换为交流电供给单相交流负载。目前LC滤波器设计方法未兼顾单次和总谐波含量;且缺少综合考虑多方面性能指标的解析设计方法。本文基于输出电压幅值、谐波畸变率、电流纹波和空载损耗等要求,提出非线性优化设计过程。随后针对一个实例开展设计,并搭建电路仿真模型,对设计结果进行验证,确认所提设计方法的有效性。 展开更多
关键词 单相全桥逆变器 输出滤波器 基波幅值 谐波畸变 电流纹波
在线阅读 下载PDF
BiCMOS工艺PWM主控器总剂量效应研究
19
作者 雷雨涵 王锦春 +4 位作者 周东 张丹 文林 郭旗 李豫东 《微电子学》 北大核心 2025年第6期1089-1094,共6页
针对UCC2800型PWM主控器开展总剂量辐射损伤效应研究,分析了PWM主控器输出脉冲和占空比的变化规律,探讨了PWM主控器单元模块构成的DC-DC电源转换器在不同负载电流条件下的输出电压退化规律,揭示了升压型DC-DC电源转换器辐射损伤退化机... 针对UCC2800型PWM主控器开展总剂量辐射损伤效应研究,分析了PWM主控器输出脉冲和占空比的变化规律,探讨了PWM主控器单元模块构成的DC-DC电源转换器在不同负载电流条件下的输出电压退化规律,揭示了升压型DC-DC电源转换器辐射损伤退化机理。研究结果表明,PWM主控器中的误差放大器退化会导致PWM主控器输出波形变化,输出波形的变化会导致占空比变大,占空比的变化导致功率开关管MOSFET导通时间变大,进而导致DC-DC电源转换器输出电压退化;负载电流越大,PWM主控器输出占空比越大,DC-DC电源转换器输出电压退化越严重。 展开更多
关键词 总剂量效应 PWM主控器 占空比 负载电流 输出电压
原文传递
电动汽车无线充电系统补偿网络输出特性研究
20
作者 王嘉辉 吝伶艳 +2 位作者 张文杰 田嘉琛 秦伟 《电测与仪表》 北大核心 2025年第8期133-141,共9页
通常无线充电系统需要在传输线圈两侧连接补偿网络来满足恒流/恒压充电的要求。许多补偿拓扑都可以实现恒流/恒压输出,但不同补偿拓扑的恒流/恒压输出特性不同。为了给工程应用和系统优化提供依据,基于当前的研究水平,分别对串-串(serie... 通常无线充电系统需要在传输线圈两侧连接补偿网络来满足恒流/恒压充电的要求。许多补偿拓扑都可以实现恒流/恒压输出,但不同补偿拓扑的恒流/恒压输出特性不同。为了给工程应用和系统优化提供依据,基于当前的研究水平,分别对串-串(series-series,SS)与双LCC补偿拓扑的恒流输出特性和S-LCC与LCC-S补偿拓扑的恒压输出特性展开分析。根据电流控制电压源表示的电路模型,分析了这几种补偿拓扑的工作原理和参数条件。研究了寄生阻抗对输出电流(电压)输出特性的影响,发现了互感和补偿参数对输出电流(电压)随负载电阻的变化率的影响规律,并且分析了不同补偿网络各自适合使用的场景。最后,在实验平台验证了理论分析的正确性。 展开更多
关键词 无线充电系统 补偿拓扑 恒流输出 恒压输出 寄生阻抗 互感偏移
在线阅读 下载PDF
上一页 1 2 46 下一页 到第
使用帮助 返回顶部