We study the effects of gas adsorption on the dynamics and stability of nanobubbles at the solid–liquid interface. The phase diagram and dynamic evolution of surface nanobubbles were analyzed under varying equilibriu...We study the effects of gas adsorption on the dynamics and stability of nanobubbles at the solid–liquid interface. The phase diagram and dynamic evolution of surface nanobubbles were analyzed under varying equilibrium adsorption constant.Four distinct dynamic behaviors appear in the phase diagram: shrinking to dissolution, expanding to bursting, shrinking to stability, and expanding to stability. Special boundary states are identified in phase diagram, where the continuous growth of nanobubbles can take place even under very weak gas–surface interaction or with very small initial bubble size. Surface adsorption plays a critical role in the stability, lifetime, radius, and contact angle of nanobubbles, thereby demonstrating that pinning is not a prerequisite for stabilization. Furthermore, stable equilibrium nanobubbles exhibit a characteristic range of footprint radius, a limited height, and a small contact angle, consistent with experimental observations.展开更多
The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can ...The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can cause reduced fertil-ity and reproductive disorders in mammals.Nevertheless,the local impact of elevated stress hormones on the ovi-duct epithelium has received limited attention to date,except for a few reports on polyovulatory species like mice and pigs.In this study,we focused on the effects of chronic maternal stress on cattle,given its association with infertil-ity issues in this monoovulatory species.Bovine oviduct epithelial cells(BOEC)differentiated at the air–liquid interface(ALI)were stimulated with 250 nmol/L cortisol for 1 or 3 weeks.Subsequently,they were assessed for morphology,bioelectrical properties,and gene expression related to oviduct function,glucocorticoid pathway,cortisol metabo-lism,inflammation,and apoptosis.Results revealed adverse effects of cortisol on epithelium structure,featured by deciliation,vacuole formation,and multilayering.Additionally,cortisol exposure led to an increase in transepithelial potential difference,downregulated mRNA expression of the major glucocorticoid receptor(NR3C1),upregulated the expression of cortisol-responsive genes(FKBP5,TSC22D3),and significant downregulation of oviductal glycopro-tein 1(OVGP1)and steroid receptors PGR and ESR1.The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells,indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine.The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2,an enzyme controlling the cellular capacity to metabolise cortisol.These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress.展开更多
The large-scale commercialization of proton exchange membrane fuel cells(PEMFCs)has been hindered by the high demand of platinum(Pt)in the cathode due to the sluggish kinetics of the oxygen reduction reaction.Reducing...The large-scale commercialization of proton exchange membrane fuel cells(PEMFCs)has been hindered by the high demand of platinum(Pt)in the cathode due to the sluggish kinetics of the oxygen reduction reaction.Reducing the amount of Pt would worsen the problems caused by the adsorption of perfluorinated sulfonic acid(PFSA)ionomers to Pt via the side chains,namely,blocking the active sites of Pt and inducing densely packed layers of fluorocarbon backbones on Pt surface to obstruct local O_(2)transport at the Pt/PFSA interfaces.This work aims at optimizing the Pt/ionomer interface to mitigate the sulfonate adsorption and in the meantime to reduce the local O_(2)transport resistance(R_(local)),by using a porous composite of 1-butyl-3-methylimidazolium hydrogen sulfate ionic liquid(IL)modified MOF-808(BMImHSO_(4)@MOF-808)as additive in cathodic catalyst layer(CCL).Through detailed physical,spectroscopic and electrochemical characterizations,we demonstrate a three-fold optimization mechanism of Pt/ionomer interface structure by BMImHSO_(4)@MOF-808:the unsaturated metal sites in MOF-808 effectively inhibit the sulfonate adsorption on Pt through coordination with the sulfonates of PFSA,thereby improving catalyst utilization;the pores in MOF-808 establish efficient transport channels for gaseous oxygen,significantly reducing R_(local);the IL modification layers facilitate the formation of continuous proton transport networks,increasing proton conductivity.The incorporation of BMImHSO_(4)@MOF-808 in a low-Pt CCL(0.1 mg_(Pt)cm^(-2))yields a peak power density of 1.9 W cm^(-2)for PEMFC under H_(2)-O_(2)condition,and ca.20%increase of power density under H_(2)-air condition as compared with conventional CCL,indicating the prospect of IL-MOF composites as an efficient additive to enhance the performance of PEMFCs.展开更多
The morphological instability of solid/liquid(S/L)interface during solidification will result in different patterns of microstructure.In this study,two dimension(2 D)and three dimension(3 D)in-situ observation of soli...The morphological instability of solid/liquid(S/L)interface during solidification will result in different patterns of microstructure.In this study,two dimension(2 D)and three dimension(3 D)in-situ observation of solid/liquid interfacial morphology transition in Al-Zn alloy during directional solidification were performed via X-ray imaging.Under a condition of increasing temperature gradient(G),the interface transition from dendritic pattern to cellular pattern,and then to planar growth with perturbation was captured.The effect of solidification parameter(the ratio of temperature gradient and growth velocity(v),G/v)on morphological instabilities was investigated and the experimental results were compared to classical"constitutional supercooling"theory.The results indicate that 2 D and 3 D evolution process of S/L interface morphology under the same thermal condition are different.It seems that the S/L interface in 2 D observation is easier to achieve planar growth than that in 3 D,implying higher S/L interface stability in 2 D thin plate samples.This can be explained as the restricted liquid flow under 2 D solidification which is beneficial to S/L interface stability.The in-situ observation in present study can provide coherent dataset for microstructural formation investigation and related model validation during solidification.展开更多
Cu/Al clad strips are prepared using solid?liquid cast-rolling bonding(SLCRB)technique with a d160mm×150mm twin-roll experimental caster.The extent of interfacial reactions,composition of the reaction products,an...Cu/Al clad strips are prepared using solid?liquid cast-rolling bonding(SLCRB)technique with a d160mm×150mm twin-roll experimental caster.The extent of interfacial reactions,composition of the reaction products,and their micro-morphology evolution in the SLCRB process are investigated with scanning electron microscope(SEM),energy dispersive spectrometer(EDS),and X-ray diffraction(XRD).In the casting pool,initial aluminized coating is first generated on the copper strip surface,with the diffusion layer mainly consisting ofα(Al)+CuAl2and growing at high temperatures,with the maximum thickness of10μm.After sequent rolling below the kiss point,the diffusion layer is broken by severe elongation,which leads to an additional crack bond process with a fresh interface of virgin base metal.The average thickness is reduced from10to5μm.The reaction products,CuAl2,CuAl,and Cu9Al4,are dispersed along the rolling direction.Peeling and bending test results indicate that the fracture occurs in the aluminum substrate,and the morphology is a dimple pattern.No crack or separation is found at the bonding interface after90°-180°bending.The presented method provides an economical way to fabricate Cu/Al clad strip directly.展开更多
A modified Bridgman directional solidification technique was used to prepare Fe-Al-Ta eutectic in situ composites at different growth rates ranging from 6 to 80 μm/s. The directionally solidified FeAl-Ta eutectic com...A modified Bridgman directional solidification technique was used to prepare Fe-Al-Ta eutectic in situ composites at different growth rates ranging from 6 to 80 μm/s. The directionally solidified FeAl-Ta eutectic composites are composed of two phases: Fe（Al,Ta） matrix phase, and Fe2 Ta（Al） Laves phase. Solidification microstructure is affected by solidification rate. Microstructure of the Fe-Al-Ta eutectic alloy grown at 6.0 μm/s is broken-lamellar eutectic. Eutectic colonies are formed with the increase of the solidification rate. Microstructures are mainly composed of the lamellar or fibrous eutectic at the center of the colony and coarse lamellar eutectic zone at the boundary. Meanwhile, the inter-lamellar spacing（or the inter-rod spacing） is decreased. The spacing adjustments are also observed in Fe-Al-Ta eutectic alloy. The solid/liquid interface evolves from planar interface to shallow cellular interface, then to deep cellular, and finally to shallow cellular planar with the increase of the solidification rate.展开更多
Interfacial defects and energy barrier would result in serious interfacial non-radiative recombination losses.In addition,the quality of perovskite films is highly dependent on deposition substrates.Consequently,there...Interfacial defects and energy barrier would result in serious interfacial non-radiative recombination losses.In addition,the quality of perovskite films is highly dependent on deposition substrates.Consequently,there is an urgent desire to develop multifunctional interface modulators to manage the interface between electron transport layer and perovskite layer.Here,we report a multifunctional buried interface modulation strategy that 4-fluoro-phenylammonium tetrafluoroborate (FBABF_(4)) consisting of simultaneously fluorinated anion and cation is inserted between SnO_(2)layer and perovskite layer.It is uncovered by time-of-flight secondary ion mass spectroscopy that the anion and cation in modifier are mainly located at this interface,which is put down to coordination bond of the fluorine atom on BF_(4)^(-) with SnO_(2),and the hydrogen bond of the fluorine atom on FBA^(+) with formamidinium.This suggests that simultaneous fluorination of anion and cation in the ionic liquid molecule is of crucial importance to ameliorate interfacial contact through chemical linker.The interface modification approach enables the realization of interfacial defect passivation,interfacial energy band alignment modulation,and perovskite crystallization manipulation,which are translated into enhanced efficiency and stability as well as significantly suppressed hysteresis.The multiple functions of FBABF_(4) endow the modified solar cells excellent photovoltaic performance with an efficiency exceeding 23%along with appealing long-term stability.This work highlights the critical role of fluorination strategy in engineering multifunctional organic salt modulators for improving interfacial contact.展开更多
How to completely remove the water from ionic liquids(ILs)is difficult for researchers because of the hygroscopicity of ILs.In order to study the hygroscopicity of ILs,two kinds of ILs,1-Butyl-3-methylimidazolium hexa...How to completely remove the water from ionic liquids(ILs)is difficult for researchers because of the hygroscopicity of ILs.In order to study the hygroscopicity of ILs,two kinds of ILs,1-Butyl-3-methylimidazolium hexafluorophosphate([Bmim][PF6])and 1-Butyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)([Bmim][NTf_(2)])were investigated by molecular dynamics simulations.Although[Bmim][PF6]and[Bmim][NTf_(2)]are hydrophobic,both of the ILs could absorb water molecules from the vapor.In this work,the process of absorbing water from the vapor phase was studied,and the water molecules could disperse into the IL.Aggregation was observed with increasing the water concentration.Although the absorbed water increases obviously,the amount of free water and small cluster in the ILs does not change significantly and always stays at a certain level.The amount of free water and small cluster in[Bmim][PF6]is more than that in[Bmim][NTf_(2)],which is consistent with their hydrophobicity.In addition,the liquid-vacuum and liquid–liquid interfaces of the ILs were simulated and analyzed in detail.The number density distribution and angle distribution indicated that[Bmim]+cations arrangement regularly at the IL-vacuum interface.The butyl chain point to the vacuum,while the imidazlium ring is close to the IL phase region and perpendicular to the interface.While at the IL-water interface,the cations and anions are disordered.展开更多
The liquid/solid(L/S)interface of dissimilar metals is critical to the microstructure,mechanical strength,and structural integrity of interconnects in many important applications such as electronics,automotive,aeronau...The liquid/solid(L/S)interface of dissimilar metals is critical to the microstructure,mechanical strength,and structural integrity of interconnects in many important applications such as electronics,automotive,aeronautics,and astronautics,and therefore has drawn increasing research interests.To design preferential microstructure and optimize mechanical properties of the interconnects,it is crucial to understand the formation and growth mechanisms of diversified structures at the L/S interface during interconnecting.In situ synchrotron radiation or tube-generated X-ray radiography and tomography technologies make it possible to observe the evolution of the L/S interface directly and therefore have greatly propelled the research in this field.Here,we review the recent progress in understanding the L/S interface behaviors using advanced in situ X-ray imaging techniques with a particular focus on the following two issues:(1)interface behaviors in the solder joints for microelectronic packaging including the intermetallic compounds(IMCs)during refl ow,Sn dendrites,and IMCs during solidification and refl ow porosities and(2)growth characteristics and morphological transition of IMCs in the interconnect of dissimilar metals at high temperature.Furthermore,the main achievements and future research perspectives in terms of metallurgical bonding mechanisms under complex conditions with improved X-ray sources and detectors are remarked and discussed.展开更多
The effect of the pulsed magnetic field on the grain refinement of superalloy K4169 has been studied in directional solidification.In the presence of the solid-liquid interface condition,the distributions of the elect...The effect of the pulsed magnetic field on the grain refinement of superalloy K4169 has been studied in directional solidification.In the presence of the solid-liquid interface condition,the distributions of the electromagnetic force,flow field,temperature field,and Joule heat in front of the solid-liquid interface in directional solidification with the pulsed magnetic field are simulated.The calculation results show that the largest electromagnetic force in the melt appears near the solid-liquid interface,and the electromagnetic force is distributed in a gradient.There are intensive electromagnetic vibrations in front of the solid-liquid interface.The forced melt convection is mainly concentrated in front of the solid-liquid interface,accompanied by a larger flow velocity.The simulation results indicate that the grain refinement is attributed to that the electromagnetic vibration and forced convection increase the nucleation rate and the probability of dendrite fragments survival,for making dendrite easily fragmented,homogenizing the melt temperature,and increasing the undercooling in front of the solid-liquid interface.展开更多
Amphiphilic molecules adsorbed at the interface could control the orientation of liquid crystals(LCs)while LCs in turn could influence the distributions of amphiphilic molecules.The studies on the interactions between...Amphiphilic molecules adsorbed at the interface could control the orientation of liquid crystals(LCs)while LCs in turn could influence the distributions of amphiphilic molecules.The studies on the interactions between liquid crystals and amphiphilic molecules at the interface are important for the development of molecular sensors.In this paper,we demonstrate that the development of smectic LC ordering from isotropic at the LC/water interface could induce local high-density distributions of amphiphilic phospholipids.Mixtures of liquid crystals and phospholipids in chloroform are first emulsified in water.By fluorescently labeling the phospholipids adsorbed at the interface,their distributions are visualized under fluorescent confocal microscope.Interestingly,local high-density distributions of phospholipids showing a high fluorescent intensity are observed on the surface of LC droplets.Investigations on the correlation between phospholipid density,surface tension and smectic LC ordering suggest that when domains of smectic LC layers nucleate and grow from isotropic at the LC/water interface as chloroform slowly evaporates at room temperature,phospholipids transition from liquid-expanded to liquid-condensed phases in response to the smectic ordering,which induces a higher surface tension at the interface.The results will provide an important insight into the interactions between liquid crystals and amphiphilic molecules at the interface.展开更多
The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacen...The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacent organic phase was investigated for the first time by thin layer method. The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase. However, the rate constant of electron transfer （ket） increased monotonically as the SDBS concentrations increased from 0 to 200 p, moFL. The experimental results showed that SDBS formed patches on the interface and influenced the structure of electrical double layer. 2009 Xiao Quan Lu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
Electrochemical transfer behavior of V ⅤW 11 -V Ⅴ 3W 9 heteropoly anions on the water/nitrobenzene interface was investigated by means of cyclic voltammetry. The effect of the solution acidity on the transfe...Electrochemical transfer behavior of V ⅤW 11 -V Ⅴ 3W 9 heteropoly anions on the water/nitrobenzene interface was investigated by means of cyclic voltammetry. The effect of the solution acidity on the transfer behavior and the stable pH range for the heteropoly anions were studied. The stability of mixed tungstovanadate decreases with increasing the number of vanadium atoms. The main transfer species within the potential window have the negative charges of 4 and the transfer process is diffusion controlled. The apparent transfer potential Δ w o Ψ 0 and the free energy Δ G 0 w→o tr for the heteropoly anions can be obtained from the experimental data. For the different anions, the Δ w o Ψ 1/2 pH relationship can be expressed as: Δ w o Ψ 1/2 =constant-53pH.展开更多
Although surface-enhanced Raman spectroscopy(SERS)has been applied for gathering fingerprint information,even in single molecule analysis,the decayed Raman signals in aqueous solutions largely obstruct the on-site ins...Although surface-enhanced Raman spectroscopy(SERS)has been applied for gathering fingerprint information,even in single molecule analysis,the decayed Raman signals in aqueous solutions largely obstruct the on-site insight reaction process.In this study,large-scaled semiconductor films with multi-walled(TiO_(2)/WO_(3)/TiO_(2))nanopore distribution are fabricated by combining electrochemical anodization and sputtering technique,and then employed as the SERS substrates for detection of molecules at the solid/liquid interfaces.Given the remarkably improved electrochromic property of the multi-walled film,such SERS substrates were endowed with tunable oxygen vacancy(VO)density and distribution via simply applying electrochemical bias voltage,which enabled one to achieve an enhanced charge transfer efficiency and thus a remarkably increased Raman signal even in solution.The VO-rich SERS substrate is highly repeatable,thus providing a reliable platform for in-situ monitoring of the target molecules or intermediates at the solid/liquid interfaces.展开更多
The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy（SFG-VS）. We clarified that the average til...The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy（SFG-VS）. We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.展开更多
Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrol...Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrolyte/electrode interfaces is essential for developing advanced renewable energy technologies.However,the direct probing of real-time interfacial changes,i.e.,the surface intermediates,chemical environment,and electronic structure,under operating conditions is challenging and necessitates the use of in situ methods.Herein,we present a new lab-based instrument commissioned to perform in situ chemical analysis at liquid/solid interfaces using ambient pressure X-ray photoelectron spectroscopy(APXPS).This setup takes advantage of a chromium source of tender X-rays and is designed to study liquid/solid interfaces by the“dip and pull”method.Each of the main components was carefully described,and the results of performance tests are presented.Using a three-electrode setup,the system can probe the intermediate species and potential shifts across the liquid electrolyte/solid electrode interface.In addition,we demonstrate how this system allows the study of interfacial changes at gas/solid interfaces using a case study:a sodium–oxygen model battery.However,the use of APXPS in electrochemical studies is still in the early stages,so we summarize the current challenges and some developmental frontiers.Despite the challenges,we expect that joint efforts to improve instruments and the electrochemical setup will enable us to obtain a better understanding of the composition–reactivity relationship at electrochemical interfaces under realistic reaction conditions.展开更多
The watermiscible room temperature ionic liquid 1butyl3methylimidazolium tetrafluorob orate （[bmim] [BF4]） is a model system for studying the interactions between ionic liquid and water molecules. In this work the o...The watermiscible room temperature ionic liquid 1butyl3methylimidazolium tetrafluorob orate （[bmim] [BF4]） is a model system for studying the interactions between ionic liquid and water molecules. In this work the orientational structure of the low concentrated aqueous solution of [bmim] [BF4] at the air/liquid interface was investigated by sum frequency gener ation vibrational spectroscopy. It has been found that at very low concentrations, the butyl chain exhibited a significant gauche defect, indicating a disordered conformation; and the cation ring oriented with a fairly small tilting angle at the surface. When the concentration increased, the cation ring tended to lie flat at the surface, and the gauche defects of the butyl chain decreased due to the intermolecular chainchain interactions and the consequent more ordered interfacial molecular arrangement. Additionally, the antisymmetric stretching mode in the PPP and SPS spectra exhibited a peak shift, showing that there exists more than one kind of orientation or chemical environment for the butyl CH3 group. These results may shed new light on understanding the surface behavior of watermiscible ionic liquids as well as the imidazolium based surfactants.展开更多
In the past few decades, various surface analysis techniques find wide applications in studies of interfacial phenomena ranging from fundamental surface science,catalysis, environmental science and energy materials.Wi...In the past few decades, various surface analysis techniques find wide applications in studies of interfacial phenomena ranging from fundamental surface science,catalysis, environmental science and energy materials.With the help of bright synchrotron sources, many of these techniques have been further advanced into novel in-situ/operando tools at synchrotron user facilities, providing molecular level understanding of chemical/electrochemical processes in-situ at gas–solid and liquid–solid interfaces.Designing a proper endstation for a dedicated beamline is one of the challenges in utilizing these techniques efficiently for a variety of user's requests. Many factors,including pressure differential, geometry and energy of the photon source, sample and analyzer, need to be optimized for the system of interest. In this paper, we discuss the design and performance of a new endstation at beamline02 B at the Shanghai Synchrotron Radiation Facility for ambient pressure X-ray photoelectron spectroscopy studies.This system, equipped with the newly developed hightransmission HiPP-3 analyzer, is demonstrated to be capable of efficiently collecting photoelectrons up to 1500 eV from ultrahigh vacuum to ambient pressure of 20 mbar.The spectromicroscopy mode of HiPP-3 analyzer also enables detection of photoelectron spatial distribution with resolution of 2.8 ± 0.3 lm in one dimension. In addition,the designing strategies of systems that allow investigations in phenomena at gas–solid interface and liquid–solid interface will be highlighted through our discussion.展开更多
The detailed understanding of various underlying processes at liquid/solid interfaces requires the development of interface-sensitive and high-resolution experimental techniques with atomic precision.In this perspecti...The detailed understanding of various underlying processes at liquid/solid interfaces requires the development of interface-sensitive and high-resolution experimental techniques with atomic precision.In this perspective,we review the recent advances in studying the liquid/solid interfaces at atomic level by electrochemical scanning tunneling microscope(EC-STM),non-contact atomic force microscopy(NC-AFM),and surface-sensitive vibrational spectroscopies.Different from the ultrahigh vacuum and cryogenic experiments,these techniques are all operated in situ under ambient condition,making the measurements close to the native state of the liquid/solid interface.In the end,we present some perspectives on emerging techniques,which can defeat the limitation of existing imaging and spectroscopic methods in the characterization of liquid/solid interfaces.展开更多
Real-time laser holographic interferometry was applied to measure liquid concentrations of CO2 in the vicinity of gas-liquid free interface under the conditions of cocurrent gas-liquid flow for absorption of CO2 by et...Real-time laser holographic interferometry was applied to measure liquid concentrations of CO2 in the vicinity of gas-liquid free interface under the conditions of cocurrent gas-liquid flow for absorption of CO2 by ethanol. The influences of the Reynolds number on the measurable interface concentration and on the film thickness were discussed. The results show that CO2 concentration decreases exponentially along the mass transfer direction,and the concentration gradient increases as Reynolds number of either liquid or gas increases. CO2 concentrations fluctuate slightly along the direction of flow; on the whole, there is an increase in CO2 concentration. The investigation also demonstrated that film thickness decreases with the increase of Reynolds number of either of the two phases. Sherwood number representing the mass transfer coefficient was finally correlated as a function of the hydrodynamic parameters and the physical properties.展开更多
基金Project supported by the Natural Science Foundation of Guangxi Zhuang Autonomous Region, China (Grant No. 2022GXNSFAA035487)the National Natural Science Foundation of China (Grant Nos. 12272100, 11474285, and 12074382)+2 种基金the Graduate Education Innovation Project of Guangxi Zhuang Autonomous Region, China (Grant No. XJCY2022012)the Guangxi Normal University Ideological and Political Demonstration Course Construction Project (Grant Nos. 2022kcsz15 and 2023kcsz29)the Innovation Project of Graduate Education of Guangxi Zhuang Autonomous Region, China (Grant No. YCBZ2024087)。
文摘We study the effects of gas adsorption on the dynamics and stability of nanobubbles at the solid–liquid interface. The phase diagram and dynamic evolution of surface nanobubbles were analyzed under varying equilibrium adsorption constant.Four distinct dynamic behaviors appear in the phase diagram: shrinking to dissolution, expanding to bursting, shrinking to stability, and expanding to stability. Special boundary states are identified in phase diagram, where the continuous growth of nanobubbles can take place even under very weak gas–surface interaction or with very small initial bubble size. Surface adsorption plays a critical role in the stability, lifetime, radius, and contact angle of nanobubbles, thereby demonstrating that pinning is not a prerequisite for stabilization. Furthermore, stable equilibrium nanobubbles exhibit a characteristic range of footprint radius, a limited height, and a small contact angle, consistent with experimental observations.
基金German research Foundation(DFG,grant numbers:CH2321/1–1 and SCHO1231/7–1)JH has received a scholarship from the Chinese Scholarship Council(CSC No.:201908350115).
文摘The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can cause reduced fertil-ity and reproductive disorders in mammals.Nevertheless,the local impact of elevated stress hormones on the ovi-duct epithelium has received limited attention to date,except for a few reports on polyovulatory species like mice and pigs.In this study,we focused on the effects of chronic maternal stress on cattle,given its association with infertil-ity issues in this monoovulatory species.Bovine oviduct epithelial cells(BOEC)differentiated at the air–liquid interface(ALI)were stimulated with 250 nmol/L cortisol for 1 or 3 weeks.Subsequently,they were assessed for morphology,bioelectrical properties,and gene expression related to oviduct function,glucocorticoid pathway,cortisol metabo-lism,inflammation,and apoptosis.Results revealed adverse effects of cortisol on epithelium structure,featured by deciliation,vacuole formation,and multilayering.Additionally,cortisol exposure led to an increase in transepithelial potential difference,downregulated mRNA expression of the major glucocorticoid receptor(NR3C1),upregulated the expression of cortisol-responsive genes(FKBP5,TSC22D3),and significant downregulation of oviductal glycopro-tein 1(OVGP1)and steroid receptors PGR and ESR1.The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells,indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine.The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2,an enzyme controlling the cellular capacity to metabolise cortisol.These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress.
文摘The large-scale commercialization of proton exchange membrane fuel cells(PEMFCs)has been hindered by the high demand of platinum(Pt)in the cathode due to the sluggish kinetics of the oxygen reduction reaction.Reducing the amount of Pt would worsen the problems caused by the adsorption of perfluorinated sulfonic acid(PFSA)ionomers to Pt via the side chains,namely,blocking the active sites of Pt and inducing densely packed layers of fluorocarbon backbones on Pt surface to obstruct local O_(2)transport at the Pt/PFSA interfaces.This work aims at optimizing the Pt/ionomer interface to mitigate the sulfonate adsorption and in the meantime to reduce the local O_(2)transport resistance(R_(local)),by using a porous composite of 1-butyl-3-methylimidazolium hydrogen sulfate ionic liquid(IL)modified MOF-808(BMImHSO_(4)@MOF-808)as additive in cathodic catalyst layer(CCL).Through detailed physical,spectroscopic and electrochemical characterizations,we demonstrate a three-fold optimization mechanism of Pt/ionomer interface structure by BMImHSO_(4)@MOF-808:the unsaturated metal sites in MOF-808 effectively inhibit the sulfonate adsorption on Pt through coordination with the sulfonates of PFSA,thereby improving catalyst utilization;the pores in MOF-808 establish efficient transport channels for gaseous oxygen,significantly reducing R_(local);the IL modification layers facilitate the formation of continuous proton transport networks,increasing proton conductivity.The incorporation of BMImHSO_(4)@MOF-808 in a low-Pt CCL(0.1 mg_(Pt)cm^(-2))yields a peak power density of 1.9 W cm^(-2)for PEMFC under H_(2)-O_(2)condition,and ca.20%increase of power density under H_(2)-air condition as compared with conventional CCL,indicating the prospect of IL-MOF composites as an efficient additive to enhance the performance of PEMFCs.
基金financially supported by National Natural Science Foundation of China(Grants 51690162,51604171 and 51701112)Shanghai Municipal Science and Technology Commission(No.17JC1400602)Shanghai Sailing Program(19YF1415900).
文摘The morphological instability of solid/liquid(S/L)interface during solidification will result in different patterns of microstructure.In this study,two dimension(2 D)and three dimension(3 D)in-situ observation of solid/liquid interfacial morphology transition in Al-Zn alloy during directional solidification were performed via X-ray imaging.Under a condition of increasing temperature gradient(G),the interface transition from dendritic pattern to cellular pattern,and then to planar growth with perturbation was captured.The effect of solidification parameter(the ratio of temperature gradient and growth velocity(v),G/v)on morphological instabilities was investigated and the experimental results were compared to classical"constitutional supercooling"theory.The results indicate that 2 D and 3 D evolution process of S/L interface morphology under the same thermal condition are different.It seems that the S/L interface in 2 D observation is easier to achieve planar growth than that in 3 D,implying higher S/L interface stability in 2 D thin plate samples.This can be explained as the restricted liquid flow under 2 D solidification which is beneficial to S/L interface stability.The in-situ observation in present study can provide coherent dataset for microstructural formation investigation and related model validation during solidification.
基金Project(51474189)supported by the National Natural Science Foundation of ChinaProject(QN2015214)supported by the Educational Commission of Hebei Province,China
文摘Cu/Al clad strips are prepared using solid?liquid cast-rolling bonding(SLCRB)technique with a d160mm×150mm twin-roll experimental caster.The extent of interfacial reactions,composition of the reaction products,and their micro-morphology evolution in the SLCRB process are investigated with scanning electron microscope(SEM),energy dispersive spectrometer(EDS),and X-ray diffraction(XRD).In the casting pool,initial aluminized coating is first generated on the copper strip surface,with the diffusion layer mainly consisting ofα(Al)+CuAl2and growing at high temperatures,with the maximum thickness of10μm.After sequent rolling below the kiss point,the diffusion layer is broken by severe elongation,which leads to an additional crack bond process with a fresh interface of virgin base metal.The average thickness is reduced from10to5μm.The reaction products,CuAl2,CuAl,and Cu9Al4,are dispersed along the rolling direction.Peeling and bending test results indicate that the fracture occurs in the aluminum substrate,and the morphology is a dimple pattern.No crack or separation is found at the bonding interface after90°-180°bending.The presented method provides an economical way to fabricate Cu/Al clad strip directly.
基金Funded by the National Natural Science Foundation of China(No.51201121)2015 Science and Technology Foundation for Selected Overseas Chinese Scholars of Shaanxi Province,Key Industry Innovation Chain(group)Project of Shaanxi Province(No.2019ZDLGY 04-04)International Science+1 种基金Technology Cooperation and Exchange Program of Shaanxi Province(No.2016KW-055)Research Project of Shaanxi Engineering Technology Research Center for Wear-resisting Materials(No.2016NMZX03)
文摘A modified Bridgman directional solidification technique was used to prepare Fe-Al-Ta eutectic in situ composites at different growth rates ranging from 6 to 80 μm/s. The directionally solidified FeAl-Ta eutectic composites are composed of two phases: Fe（Al,Ta） matrix phase, and Fe2 Ta（Al） Laves phase. Solidification microstructure is affected by solidification rate. Microstructure of the Fe-Al-Ta eutectic alloy grown at 6.0 μm/s is broken-lamellar eutectic. Eutectic colonies are formed with the increase of the solidification rate. Microstructures are mainly composed of the lamellar or fibrous eutectic at the center of the colony and coarse lamellar eutectic zone at the boundary. Meanwhile, the inter-lamellar spacing（or the inter-rod spacing） is decreased. The spacing adjustments are also observed in Fe-Al-Ta eutectic alloy. The solid/liquid interface evolves from planar interface to shallow cellular interface, then to deep cellular, and finally to shallow cellular planar with the increase of the solidification rate.
基金supported by the National Natural Science Foundation of China (Grant Nos. 62004058, U21A2076, 21701041, 52071048)the Nature Science Foundation of Hebei Province (Grant No. F2020202022)+4 种基金the Open Fund of the State Key Laboratory of Integrated Optoelectronics (Grant No. IOSKL2020KF09)the State Key Laboratory of Reliability and Intelligence of Electrical Equipment (Grant No. EERI_PI20200005)supported by the Support plan for Overseas Students to Return to China for Entrepreneurship and Innovation (Grant No. cx2020003)the Fundamental Research Funds for the Central Universities (Grant No. 2020CDJ-LHZZ-074)the Natural Science Foundation of Chongqing (Grant No. cstc2020jcyjmsxmX0629)。
文摘Interfacial defects and energy barrier would result in serious interfacial non-radiative recombination losses.In addition,the quality of perovskite films is highly dependent on deposition substrates.Consequently,there is an urgent desire to develop multifunctional interface modulators to manage the interface between electron transport layer and perovskite layer.Here,we report a multifunctional buried interface modulation strategy that 4-fluoro-phenylammonium tetrafluoroborate (FBABF_(4)) consisting of simultaneously fluorinated anion and cation is inserted between SnO_(2)layer and perovskite layer.It is uncovered by time-of-flight secondary ion mass spectroscopy that the anion and cation in modifier are mainly located at this interface,which is put down to coordination bond of the fluorine atom on BF_(4)^(-) with SnO_(2),and the hydrogen bond of the fluorine atom on FBA^(+) with formamidinium.This suggests that simultaneous fluorination of anion and cation in the ionic liquid molecule is of crucial importance to ameliorate interfacial contact through chemical linker.The interface modification approach enables the realization of interfacial defect passivation,interfacial energy band alignment modulation,and perovskite crystallization manipulation,which are translated into enhanced efficiency and stability as well as significantly suppressed hysteresis.The multiple functions of FBABF_(4) endow the modified solar cells excellent photovoltaic performance with an efficiency exceeding 23%along with appealing long-term stability.This work highlights the critical role of fluorination strategy in engineering multifunctional organic salt modulators for improving interfacial contact.
基金financial support from the National Science Fund for Excellent Young Scholars(21722610)Taishan Scholars Program of Shandong Province(tsqn201909091)。
文摘How to completely remove the water from ionic liquids(ILs)is difficult for researchers because of the hygroscopicity of ILs.In order to study the hygroscopicity of ILs,two kinds of ILs,1-Butyl-3-methylimidazolium hexafluorophosphate([Bmim][PF6])and 1-Butyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)([Bmim][NTf_(2)])were investigated by molecular dynamics simulations.Although[Bmim][PF6]and[Bmim][NTf_(2)]are hydrophobic,both of the ILs could absorb water molecules from the vapor.In this work,the process of absorbing water from the vapor phase was studied,and the water molecules could disperse into the IL.Aggregation was observed with increasing the water concentration.Although the absorbed water increases obviously,the amount of free water and small cluster in the ILs does not change significantly and always stays at a certain level.The amount of free water and small cluster in[Bmim][PF6]is more than that in[Bmim][NTf_(2)],which is consistent with their hydrophobicity.In addition,the liquid-vacuum and liquid–liquid interfaces of the ILs were simulated and analyzed in detail.The number density distribution and angle distribution indicated that[Bmim]+cations arrangement regularly at the IL-vacuum interface.The butyl chain point to the vacuum,while the imidazlium ring is close to the IL phase region and perpendicular to the interface.While at the IL-water interface,the cations and anions are disordered.
基金supported by the National Key Research and Development Program(Nos.2017YFA0403800 and 2017YFB0305301)the National Natural Science Foundation of ChinaExcellent Young Scholars(No.51922068)+1 种基金the National Natural Science Foundation of China(Nos.51727802,51821001 and 51904187)funded by China Postdoctoral Science Foundation(No.2019M661500)。
文摘The liquid/solid(L/S)interface of dissimilar metals is critical to the microstructure,mechanical strength,and structural integrity of interconnects in many important applications such as electronics,automotive,aeronautics,and astronautics,and therefore has drawn increasing research interests.To design preferential microstructure and optimize mechanical properties of the interconnects,it is crucial to understand the formation and growth mechanisms of diversified structures at the L/S interface during interconnecting.In situ synchrotron radiation or tube-generated X-ray radiography and tomography technologies make it possible to observe the evolution of the L/S interface directly and therefore have greatly propelled the research in this field.Here,we review the recent progress in understanding the L/S interface behaviors using advanced in situ X-ray imaging techniques with a particular focus on the following two issues:(1)interface behaviors in the solder joints for microelectronic packaging including the intermetallic compounds(IMCs)during refl ow,Sn dendrites,and IMCs during solidification and refl ow porosities and(2)growth characteristics and morphological transition of IMCs in the interconnect of dissimilar metals at high temperature.Furthermore,the main achievements and future research perspectives in terms of metallurgical bonding mechanisms under complex conditions with improved X-ray sources and detectors are remarked and discussed.
基金financially supported by the National Natural Science Foundation of China (No. 51674236)the Key Research and Development Program of Liaoning Province (No.2019JH2/10100009)+1 种基金the National Science and Technology Major Project (No.2017-Ⅵ-0003-0073)the National Key Research and Development Program (No.2018Y-FA0702900)。
文摘The effect of the pulsed magnetic field on the grain refinement of superalloy K4169 has been studied in directional solidification.In the presence of the solid-liquid interface condition,the distributions of the electromagnetic force,flow field,temperature field,and Joule heat in front of the solid-liquid interface in directional solidification with the pulsed magnetic field are simulated.The calculation results show that the largest electromagnetic force in the melt appears near the solid-liquid interface,and the electromagnetic force is distributed in a gradient.There are intensive electromagnetic vibrations in front of the solid-liquid interface.The forced melt convection is mainly concentrated in front of the solid-liquid interface,accompanied by a larger flow velocity.The simulation results indicate that the grain refinement is attributed to that the electromagnetic vibration and forced convection increase the nucleation rate and the probability of dendrite fragments survival,for making dendrite easily fragmented,homogenizing the melt temperature,and increasing the undercooling in front of the solid-liquid interface.
基金supported by Zhejiang Provincial Natural Science Foundation of China(No.LY20B060027)National Natural Science Foundation of China(No.21878258)+2 种基金the Spanish Ministry of Economy MINECO for a Juan de la Cierva-Incorporacion Fellowship(No.IJCI-2014-22461)supported by the National Science Foundation(No.DMR1310266)the Harvard Materials Research Science and Engineering Center(No.DMR-1420570)。
文摘Amphiphilic molecules adsorbed at the interface could control the orientation of liquid crystals(LCs)while LCs in turn could influence the distributions of amphiphilic molecules.The studies on the interactions between liquid crystals and amphiphilic molecules at the interface are important for the development of molecular sensors.In this paper,we demonstrate that the development of smectic LC ordering from isotropic at the LC/water interface could induce local high-density distributions of amphiphilic phospholipids.Mixtures of liquid crystals and phospholipids in chloroform are first emulsified in water.By fluorescently labeling the phospholipids adsorbed at the interface,their distributions are visualized under fluorescent confocal microscope.Interestingly,local high-density distributions of phospholipids showing a high fluorescent intensity are observed on the surface of LC droplets.Investigations on the correlation between phospholipid density,surface tension and smectic LC ordering suggest that when domains of smectic LC layers nucleate and grow from isotropic at the LC/water interface as chloroform slowly evaporates at room temperature,phospholipids transition from liquid-expanded to liquid-condensed phases in response to the smectic ordering,which induces a higher surface tension at the interface.The results will provide an important insight into the interactions between liquid crystals and amphiphilic molecules at the interface.
基金supported by the National Science Foundation of China(No.20775060 and No.20875077)the National Science Foundation of Gansu(No.0701RJZA109 and No.0803RJZA105)and the Key Laboratory of Polymer Materials of Gansu Province
文摘The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacent organic phase was investigated for the first time by thin layer method. The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase. However, the rate constant of electron transfer （ket） increased monotonically as the SDBS concentrations increased from 0 to 200 p, moFL. The experimental results showed that SDBS formed patches on the interface and influenced the structure of electrical double layer. 2009 Xiao Quan Lu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金Supported by the NaturalScienceFoundation of China( No.2 0 2 75 0 31) ,the Teaching and Research Award Programfor Outstanding Young Techers in High Education of MOE of China and KJCX- 0 1of Northwest Normal University
文摘Electrochemical transfer behavior of V ⅤW 11 -V Ⅴ 3W 9 heteropoly anions on the water/nitrobenzene interface was investigated by means of cyclic voltammetry. The effect of the solution acidity on the transfer behavior and the stable pH range for the heteropoly anions were studied. The stability of mixed tungstovanadate decreases with increasing the number of vanadium atoms. The main transfer species within the potential window have the negative charges of 4 and the transfer process is diffusion controlled. The apparent transfer potential Δ w o Ψ 0 and the free energy Δ G 0 w→o tr for the heteropoly anions can be obtained from the experimental data. For the different anions, the Δ w o Ψ 1/2 pH relationship can be expressed as: Δ w o Ψ 1/2 =constant-53pH.
基金supported by National Natural Science Foundation of China(Nos.21874013,22074013 and 22073030)the Fundamental Research Funds for the Central Universities(Nos.N2105018 and N2005027)+1 种基金the China Postdoctoral Science Foundation(No.2019M661109)supported by the Supercomputer Centre of East China Normal University(ECNU Public Platform for Innovation No.001).
文摘Although surface-enhanced Raman spectroscopy(SERS)has been applied for gathering fingerprint information,even in single molecule analysis,the decayed Raman signals in aqueous solutions largely obstruct the on-site insight reaction process.In this study,large-scaled semiconductor films with multi-walled(TiO_(2)/WO_(3)/TiO_(2))nanopore distribution are fabricated by combining electrochemical anodization and sputtering technique,and then employed as the SERS substrates for detection of molecules at the solid/liquid interfaces.Given the remarkably improved electrochromic property of the multi-walled film,such SERS substrates were endowed with tunable oxygen vacancy(VO)density and distribution via simply applying electrochemical bias voltage,which enabled one to achieve an enhanced charge transfer efficiency and thus a remarkably increased Raman signal even in solution.The VO-rich SERS substrate is highly repeatable,thus providing a reliable platform for in-situ monitoring of the target molecules or intermediates at the solid/liquid interfaces.
基金supported by the National Natural Science Foundation of China (Nos. 21227802, 21303216 and 21473217)
文摘The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy（SFG-VS）. We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.
文摘Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrolyte/electrode interfaces is essential for developing advanced renewable energy technologies.However,the direct probing of real-time interfacial changes,i.e.,the surface intermediates,chemical environment,and electronic structure,under operating conditions is challenging and necessitates the use of in situ methods.Herein,we present a new lab-based instrument commissioned to perform in situ chemical analysis at liquid/solid interfaces using ambient pressure X-ray photoelectron spectroscopy(APXPS).This setup takes advantage of a chromium source of tender X-rays and is designed to study liquid/solid interfaces by the“dip and pull”method.Each of the main components was carefully described,and the results of performance tests are presented.Using a three-electrode setup,the system can probe the intermediate species and potential shifts across the liquid electrolyte/solid electrode interface.In addition,we demonstrate how this system allows the study of interfacial changes at gas/solid interfaces using a case study:a sodium–oxygen model battery.However,the use of APXPS in electrochemical studies is still in the early stages,so we summarize the current challenges and some developmental frontiers.Despite the challenges,we expect that joint efforts to improve instruments and the electrochemical setup will enable us to obtain a better understanding of the composition–reactivity relationship at electrochemical interfaces under realistic reaction conditions.
文摘The watermiscible room temperature ionic liquid 1butyl3methylimidazolium tetrafluorob orate （[bmim] [BF4]） is a model system for studying the interactions between ionic liquid and water molecules. In this work the orientational structure of the low concentrated aqueous solution of [bmim] [BF4] at the air/liquid interface was investigated by sum frequency gener ation vibrational spectroscopy. It has been found that at very low concentrations, the butyl chain exhibited a significant gauche defect, indicating a disordered conformation; and the cation ring oriented with a fairly small tilting angle at the surface. When the concentration increased, the cation ring tended to lie flat at the surface, and the gauche defects of the butyl chain decreased due to the intermolecular chainchain interactions and the consequent more ordered interfacial molecular arrangement. Additionally, the antisymmetric stretching mode in the PPP and SPS spectra exhibited a peak shift, showing that there exists more than one kind of orientation or chemical environment for the butyl CH3 group. These results may shed new light on understanding the surface behavior of watermiscible ionic liquids as well as the imidazolium based surfactants.
基金supported by the National Natural Science Foundation of China(No.11227902)part of NSFC ME~2 beamline project and Science and Technology Commission of Shanghai Municipality(No.14520722100)supported by National Natural Science Foundation of China(Nos.21802096,21832004,and11805255)
文摘In the past few decades, various surface analysis techniques find wide applications in studies of interfacial phenomena ranging from fundamental surface science,catalysis, environmental science and energy materials.With the help of bright synchrotron sources, many of these techniques have been further advanced into novel in-situ/operando tools at synchrotron user facilities, providing molecular level understanding of chemical/electrochemical processes in-situ at gas–solid and liquid–solid interfaces.Designing a proper endstation for a dedicated beamline is one of the challenges in utilizing these techniques efficiently for a variety of user's requests. Many factors,including pressure differential, geometry and energy of the photon source, sample and analyzer, need to be optimized for the system of interest. In this paper, we discuss the design and performance of a new endstation at beamline02 B at the Shanghai Synchrotron Radiation Facility for ambient pressure X-ray photoelectron spectroscopy studies.This system, equipped with the newly developed hightransmission HiPP-3 analyzer, is demonstrated to be capable of efficiently collecting photoelectrons up to 1500 eV from ultrahigh vacuum to ambient pressure of 20 mbar.The spectromicroscopy mode of HiPP-3 analyzer also enables detection of photoelectron spatial distribution with resolution of 2.8 ± 0.3 lm in one dimension. In addition,the designing strategies of systems that allow investigations in phenomena at gas–solid interface and liquid–solid interface will be highlighted through our discussion.
文摘The detailed understanding of various underlying processes at liquid/solid interfaces requires the development of interface-sensitive and high-resolution experimental techniques with atomic precision.In this perspective,we review the recent advances in studying the liquid/solid interfaces at atomic level by electrochemical scanning tunneling microscope(EC-STM),non-contact atomic force microscopy(NC-AFM),and surface-sensitive vibrational spectroscopies.Different from the ultrahigh vacuum and cryogenic experiments,these techniques are all operated in situ under ambient condition,making the measurements close to the native state of the liquid/solid interface.In the end,we present some perspectives on emerging techniques,which can defeat the limitation of existing imaging and spectroscopic methods in the characterization of liquid/solid interfaces.
基金Supported by the National Natural Science Foundation of China (No.20476072).
文摘Real-time laser holographic interferometry was applied to measure liquid concentrations of CO2 in the vicinity of gas-liquid free interface under the conditions of cocurrent gas-liquid flow for absorption of CO2 by ethanol. The influences of the Reynolds number on the measurable interface concentration and on the film thickness were discussed. The results show that CO2 concentration decreases exponentially along the mass transfer direction,and the concentration gradient increases as Reynolds number of either liquid or gas increases. CO2 concentrations fluctuate slightly along the direction of flow; on the whole, there is an increase in CO2 concentration. The investigation also demonstrated that film thickness decreases with the increase of Reynolds number of either of the two phases. Sherwood number representing the mass transfer coefficient was finally correlated as a function of the hydrodynamic parameters and the physical properties.
