The glass curtain wall is widely favored by the owners for its good appearance modeling efthct. In using process, however, excessive energy consumption, low level indoor eomtort and other problems of glass curtain wal...The glass curtain wall is widely favored by the owners for its good appearance modeling efthct. In using process, however, excessive energy consumption, low level indoor eomtort and other problems of glass curtain wall are often exposed. Aiming at office buildings in hot Summer and cold Winter zone, taking the optimization of thermal comfort of double glass curtain wall in the summer and the reduetion of building energy consumption throughout the year as the breakthrough point, using the method of energy simulation analysis, through changing the size of internal shading component in the simulated room, this paper analyzes and summarizes the variation law of its energy consumption value, to explore the relatively reasonable design plan of shading systems of the building with glass curtain wall.展开更多
A new concentration transducer for the measurement of gas/solid two-phase flow in the profile of pipeline was studied. The design of grid electrode was employed, and hence the distribute of electric field in the space...A new concentration transducer for the measurement of gas/solid two-phase flow in the profile of pipeline was studied. The design of grid electrode was employed, and hence the distribute of electric field in the space was homogeneous effectively. The variance of measurement value for the influence of flow regime variations has greatly reduced, and the precision of measurement was improved. Meanwhile, optimization of axial property in the grid electrode increases the ability of tracing and measuring of the concentration signal in real-time.展开更多
In response to the deficiencies of commonly used optimization methods for assembly lines,a production demand-oriented optimization method for assembly lines is proposed.Taking a certain compressor assembly line as an ...In response to the deficiencies of commonly used optimization methods for assembly lines,a production demand-oriented optimization method for assembly lines is proposed.Taking a certain compressor assembly line as an example,the production rhythm and the number of workstations are calculated based on production requirements and working systems.With assembly rhythm and smoothing index as optimization goals,an improved particle swarm optimization algorithm is employed for process allocation.Subsequently,Flexsim simulation is used to analyze the assembly line.The final results show that after optimization using the improved particle swarm algorithm,the assembly line balance rate increased from 71.1%to 85.9%,and the assembly line smoothing index decreased from 47.4 to 29.8,significantly enhancing assembly efficiency.This demonstrates the effectiveness of the proposed optimization method for the assembly line and provides a reference for other products in the same industry.展开更多
Network-based manufacturing is a kind of distributed system, which enables manufacturers to finish production tasks as well as to grasp the opportunities in the market, even if manufacturing resources are insufficient...Network-based manufacturing is a kind of distributed system, which enables manufacturers to finish production tasks as well as to grasp the opportunities in the market, even if manufacturing resources are insufficient. One of the main problems in network-based manufacturing is the allocation of resources and the assignment of tasks rationally, according to flexible resource distribution. The mapping rules and relations between production techniques and resources are proposed, followed by the definition of the resource unit. Ultimately, the genetic programming method for the optimization of the manufacturing system is put forward. A set of software for the optimization system of simulation process using genetic programming techniques has been developed, and the problems of manufacturing resource planning in network-based manufacturing are solved with the simulation of optimizing methods by genetic programming. The optimum proposal of hardware planning, selection of company and scheduling will be obtained in theory to help company managers in scientific decision-making.展开更多
We present a novel system productivity simulation and optimization modeling framework in which equipment availability is a variable in the expected productivity function of the system. The framework is used for alloca...We present a novel system productivity simulation and optimization modeling framework in which equipment availability is a variable in the expected productivity function of the system. The framework is used for allocating trucks by route according to their operating performances in a truck-shovel system of an open-pit mine, so as to maximize the overall productivity of the fleet. We implement the framework in an originally designed and specifically developed simulator-optimizer software tool. We make an application on a real open-pit mine case study taking into account the stochasticity of the equipment behavior and environment. The total system production values obtained with and without considering the equipment reliability, availability and maintainability (RAM) characteristics are compared. We show that by taking into account the truck and shovel RAM aspects, we can maximize the total production of the system and obtain specific information on the production availability and productivity of its components.展开更多
With the aim of visualizing the real-time simulation calculation of water delivery system (WDS), a structural drawing-oriented (SDO) simulation technique was presented, and applied to Zhangjiuhe Diversion Project, whi...With the aim of visualizing the real-time simulation calculation of water delivery system (WDS), a structural drawing-oriented (SDO) simulation technique was presented, and applied to Zhangjiuhe Diversion Project, which is a long-distance water delivery system constructed for draw- ing water from the Zhangjiuhe River to Kunming city. Taking SIMULINK software as simulating plat-form, the technique established a visual dynamic simulation model for the system. The simulation procedure of the system was simplified,and the efficiency of modeling was also enhanced according to the modularization and reutilization of the simulation program. Furthermore, a self-optimization model was presented. Based on the digital simulation models, the on line controlled optimization link was added, and the input data can be continually optimized according to the feedback information of simulating output. The system was thus optimized automatically. Built upon MATLAB software, simulation optimization of the Zhangjiuhe Diversion Project was achieved, which provides a new way for the research of optimal operation of WDS.展开更多
Finite element（FE） is a powerful tool and has been applied by investigators to real-time hybrid simulations（RTHSs）. This study focuses on the computational efficiency, including the computational time and accuracy...Finite element（FE） is a powerful tool and has been applied by investigators to real-time hybrid simulations（RTHSs）. This study focuses on the computational efficiency, including the computational time and accuracy, of numerical integrations in solving FE numerical substructure in RTHSs. First, sparse matrix storage schemes are adopted to decrease the computational time of FE numerical substructure. In this way, the task execution time（TET） decreases such that the scale of the numerical substructure model increases. Subsequently, several commonly used explicit numerical integration algorithms, including the central difference method（CDM）, the Newmark explicit method, the Chang method and the Gui-λ method, are comprehensively compared to evaluate their computational time in solving FE numerical substructure. CDM is better than the other explicit integration algorithms when the damping matrix is diagonal, while the Gui-λ（λ = 4） method is advantageous when the damping matrix is non-diagonal. Finally, the effect of time delay on the computational accuracy of RTHSs is investigated by simulating structure-foundation systems. Simulation results show that the influences of time delay on the displacement response become obvious with the mass ratio increasing, and delay compensation methods may reduce the relative error of the displacement peak value to less than 5% even under the large time-step and large time delay.展开更多
Optimizing train movement has a great significance for railway traffic. In this paper, based on the optimal velocity car-following model, we propose a new simulation model for optimizing train movement in railway traf...Optimizing train movement has a great significance for railway traffic. In this paper, based on the optimal velocity car-following model, we propose a new simulation model for optimizing train movement in railway traffic. Here a kind of single-track railway is considered. Our aim is to reduce the energy consumption of train movement and ensure the train being on time by controlling the velocity curve of train movement. The simulation results indicate that the proposed model is effective for optimizing train movement. In addition, some major characteristics of train movement can be well captured. This method provides a new way to optimize train movement in railway traffic.展开更多
In order to solve the complex optimization problem dealing with uncertain phenomenon effectively, this paper presents a probability simulation optimization approach using orthogonal genetic algorithm. This approach sy...In order to solve the complex optimization problem dealing with uncertain phenomenon effectively, this paper presents a probability simulation optimization approach using orthogonal genetic algorithm. This approach synthesizes the computer simulation technology, orthogonal genetic algorithm and statistical test method faultlessly, which can solve complex optimization problem effectively. In this paper, the author gives the correlative conception of probability simulation optimization and describes the probability simulation optimization approach using orthogonal genetic algorithm in detail. Theoretically speaking, it has a strong rationality and maneuverability that can apply probability method in solving the complex optimization problems with uncertain phenomenon. In demonstration, the optimization performance of this method is better than other traditional methods. Simulation resuh suggests that the approach referred to this paper is feasible, correct and valid.展开更多
A new vapor distributor based on the Coanda effect is added to the Dividing Wall column(DWC),and the multiphase flow simulation is performed using ANSYS Fluent by this model.The results show that with the addition of ...A new vapor distributor based on the Coanda effect is added to the Dividing Wall column(DWC),and the multiphase flow simulation is performed using ANSYS Fluent by this model.The results show that with the addition of the liquid phase,the new vapor distributor still follows the Coanda effect.Hereby,the vapor is ejected from the slits of the distributor to take away the surrounding vapor,and a negative pressure is formed under the distributor,so as to achieve the purpose of regulating Rv.Analogously to the working principle of vapor distributor,a certain amount of vapor is drawn out from a position of prefractionator,which is equivalent to the vapor ejected by the distributor.The same amount of vapor is fed into the main column,which corresponds to the gas phase at the inlet of the distributor.The Rv is adjusted by changing the speed of the input or output vapor.Simulation results show that adding this control mechanism on the basis of temperature or concentration control structure can better achieve the effect of vapor distribution.展开更多
As the take-off of China’s macro economy,as well as the rapid development of infrastructure construction,real estate industry,and highway logistics transportation industry,the demand for heavy vehicles is increasing ...As the take-off of China’s macro economy,as well as the rapid development of infrastructure construction,real estate industry,and highway logistics transportation industry,the demand for heavy vehicles is increasing rapidly,the competition is becoming increasingly fierce,and the digital transformation of the production line is imminent.As one of themost important components of heavy vehicles,the transmission front andmiddle case assembly lines have a high degree of automation,which can be used as a pilot for the digital transformation of production.To ensure the visualization of digital twins(DT),consistent control logic,and real-time data interaction,this paper proposes an experimental digital twin modeling method for the transmission front and middle case assembly line.Firstly,theDT-based systemarchitecture is designed,and theDT model is created by constructing the visualization model,logic model,and data model of the assembly line.Then,a simulation experiment is carried out in a virtual space to analyze the existing problems in the current assembly line.Eventually,some improvement strategies are proposed and the effectiveness is verified by a new simulation experiment.展开更多
Predictive control has recently received much attention from researchers. However a challenging problem to be solved is how to tune the parameters of the predictive controller. So far, only few guidelines related to t...Predictive control has recently received much attention from researchers. However a challenging problem to be solved is how to tune the parameters of the predictive controller. So far, only few guidelines related to tuning of the parameters of predictive controllers have been provided in literature. In practice, these parameters are generally off-line determined by the designers' experience. From the point of view of process control, it is difficult to find out the optimal parameters for the control system based on a single quadratic performance index, which is used in the standard predictive control algorithm. The fuzzy decision-making function is investigated in this paper. Firstly, M control actions are achieved by unconstrained predictive control algorithm, and fuzzy goals and fuzzy constraints are then calculated and the global satisfaction degree is obtained by fuzzy inference. Moreover, the weighting coefficient λ in the cost function is tuned using simulation optimization according to the fuzzy criteria.展开更多
Boiling heat transfer and the controllability of the thermal load of the cylinder head were studied.The thermodynamic phase change characteristics of the cylinder head coolant were considered and the mass,momentumand ...Boiling heat transfer and the controllability of the thermal load of the cylinder head were studied.The thermodynamic phase change characteristics of the cylinder head coolant were considered and the mass,momentumand energy transfers between two phases were calculated with the interface transfer submodels by using the computational fluid dynamics software CFX. Results showed that compared with the single-phase flow without considering the boiling heat transfer,the sub-cooled boiling heat transfer of the cylinder head was greatly increased. According to the results of the numerical simulation,an optimized structure of the water jacket was proposed. Finally,temperature and velocity of coolant,diameter of flow passage and mean bubble diameter that influences sub-cooled boiling were studied using the orthogonal experiment method.展开更多
Constructing impermeable curtains to contain contaminant in aquifers is a costly and complex process that can impact the structure integrity of aquifer systems.Are impermeable curtains necessary for a groundwater cont...Constructing impermeable curtains to contain contaminant in aquifers is a costly and complex process that can impact the structure integrity of aquifer systems.Are impermeable curtains necessary for a groundwater contaminant remediation project?This study evaluates the necessity of impermeable curtains for groundwater contaminant remediation projects.Specifically,it considers remediation efforts based on the Pump and Treat(PAT)technique under various hydrogeological conditions and contaminant properties,comparing the total remediation cost and effectiveness.To further investigate,a multi-objective simulation and optimization model,utilizing the Multi-Objective Fast Harmony Search(MOFHS)algorithm,was employed to identify optimal groundwater remediation system designs that without impermeable curtains.Both a two-dimensional(2-D)hypothetical example and a three-dimensional(3-D)field example were used to assess the necessity of constructing impermeable curtains.The 2-D hypothetical example demonstrated that the installation of impermeable curtain is justified only when the dispersivity(αL)of the contaminant reaches 100 meters.In most cases,particularly at sites with porosity(n)under 0.3,alternative,more cost-effective,and efficient remediation strategies may be available,making impermeable barriers unnecessary.The optimization results of the 3-D field example further corroborate the conclusions derived from the 2-D hypothetical example.These findings provide valuable guidance for more scientifically informed,reasonable,and cost-effective groundwater contaminant remediation projects.展开更多
Climate change significantly affects vegetation dynamics.Thus,understanding interactions between vegetation and climatic factors is essential for ecological management.This study used kernel Normalized Difference Vege...Climate change significantly affects vegetation dynamics.Thus,understanding interactions between vegetation and climatic factors is essential for ecological management.This study used kernel Normalized Difference Vegetation Index(kNDVI)and climatic data(temperature,precipitation,humidity,and vapor pressure deficit(VPD))of China from 2000 to 2022,integrating Geographic Convergent Cross Mapping(GCCM)causal modeling,Extreme Gradient Boosting-Shapley Additive Explanations(XGBoost-SHAP)nonlinear threshold identification,and Geographical Simulation and Optimization Systems-Future Land Use Simulation(GeoSOS-FLUS)spatial prediction modeling to investigate vegetation spatiotemporal characteristics,driving mechanisms,nonlinear thresholds,and future spatial patterns.Results indicated that from 2000 to 2022,China's kNDVI showed an overall increasing trend(annual average ranging from 0.29 to 0.33 with distinct spatial differentiation:52.77%of areas locating in agricultural and ecological restoration regions in the central-eastern plain)experienced vegetation improvement,whereas 2.68%of areas locating in the southeastern coastal urbanized regions and the Yangtze River Delta experience vegetation degradation.The coefficient of variation(CV)of kNDVI at 0.30–0.40(accounting for 10.61%)was significantly higher than that of NDVI(accounting for 1.80%).Climate-driven mechanisms exhibited notable library length(L)dependence.At short-term scales(L<50),vegetation-driven transpiration regulated local microclimate,with a causal strength from kNDVI to temperature of 0.04–0.15;at long-term scales(L>100),cumulative temperature effects dominated vegetation dynamics,with a causal strength from temperature to kNDVI of 0.33.Humidity and kNDVI formed bidirectional positive feedback at long-term scales(L=210,causal strength>0.70),whereas the long-term suppressive effect of VPD was particularly pronounced(causal strength=0.21)in arid areas.The optimal threshold intervals identified were temperature at–12.18℃–0.67℃,precipitation at 24.00–159.74 mm,humidity of lower than 22.00%,and VPD of<0.07,0.17–0.24,and>0.30 kPa;notably,the lower precipitation threshold(24.00 mm)represented the minimum water requirements for vegetation recovery in arid areas.Future kNDVI spatial patterns are projected to continue the trend of"southeastern optimization and northwestern delay"from 2025 to 2040:the area proportion of high kNDVI value(>0.50)will rise from 40.43%to 41.85%,concentrated in the Sichuan Basin and the southern hills;meanwhile,the proportion of low-value areas of kNDVI(0.00–0.10)in the arid northwestern areas will decline by only 1.25%,constrained by sustained temperature and VPD stress.This study provides a scientific basis for vegetation dynamic regulation and sustainable development under climate change.展开更多
As the most important cultural practices for ramie （Boehmeria nivea） production, the single effects of plant density and nitrogen （N）, phosphorus （P）, potassium （K） fertilization on yield are well documented. ...As the most important cultural practices for ramie （Boehmeria nivea） production, the single effects of plant density and nitrogen （N）, phosphorus （P）, potassium （K） fertilization on yield are well documented. To achieve the high yield and quality of ramie fiber, it is principal to quantify the fertilizer dosage for ramie sustainable production. A central composite design （CCD） was adopted with three replications, for a two-year field experiment （2008-2009） in the Yangtze River Valley of China. The aim was to evaluate both the individual and combined effects of plant density and N, P, and K fertilization on yield and fiber quality. The effects of the four factors on yield and quality of ramie cultivar Huazhu 4 were tested. Then mathematical models of the relationship among the four factors affecting ramie production and quality were established and analyzed to optimize the four factors, and used to establish optimum cultivation methods for the elite cultivar suitable to this area of the Yangtze River Valley. Supplements of N （X2）, P 0（3） and K 0（4）, and the density （X0 with N （X2） interaction significantly influenced strength in tests of mature ramie. The influence on fiber yield in the two year tests by the four factors ranked as follows： X3〉X4〉X~〉X2. We established the optimization technique attaining yield of 2 600 kg ha-~ in the tests as following： density of 28 350-31 650 plants ha-1, and supplements of N, P and K of 363-387, 98.58-105.48 and 280.20- 319.8 kg ha-1, respectively. It was concluded that nitrogen mostly improved plant growth and fiber yield while potassium had discernible effects on fiber quality.展开更多
The current Whale Optimization Algorithm(WOA)has several drawbacks,such as slow convergence,low solution accuracy and easy to fall into the local optimal solution.To overcome these drawbacks,an improved Whale Optimiza...The current Whale Optimization Algorithm(WOA)has several drawbacks,such as slow convergence,low solution accuracy and easy to fall into the local optimal solution.To overcome these drawbacks,an improved Whale Optimization Algorithm(IWOA)is proposed in this study.IWOA can enhance the global search capability by two measures.First,the crossover and mutation operations in Differential Evolutionary algorithm(DE)are combined with the whale optimization algorithm.Second,the cloud adaptive inertia weight is introduced in the position update phase of WOA to divide the population into two subgroups,so as to balance the global search ability and local development ability.ANSYS and Matlab are used to establish the structure model.To demonstrate the application of the IWOA,truss structural optimizations on 52-bar plane truss and 25-bar space truss were performed,and the results were are compared with that obtained by other optimization algorithm.It is verified that,compared with WOA,the IWOA has higher efficiency,fast convergence speed,better solution accuracy and stability.So IWOA can be used in the optimization design of large truss structures.展开更多
To optimize industrial Fischer-Tropsch （IT） synthesis with the slurry bubble column reactor （SBCR） and iron- based catalyst, a comprehensive process model for IT synthesis that includes a detailed SBCR model, gas ...To optimize industrial Fischer-Tropsch （IT） synthesis with the slurry bubble column reactor （SBCR） and iron- based catalyst, a comprehensive process model for IT synthesis that includes a detailed SBCR model, gas liquid separation model, simplified CO2 removal model and tail gas cycle model was developed. An effective iteration algorithm was proposed to solve this process model, and the model was validated by industrial demonstration experiments data （SBCR with 5.8 m diameter and 30 m height）, with a maximum relative error 〈 10% for predicting the SBCR performances. Subsequently, the proposed model was adopted to optimize the industrial SBCR performances simultaneously considering process and reactor parameters variations. The results show that C5＋yield increases as catalyst loading increases within 10-70 ton and syngas H2/CO value decreases within 1.3-1.6, but it doesn＇t increase obviously when the catalyst loading exceeds 45 ton （about 15 wt% concentration）. Higher catalyst loading will result in higher difficulty for wax/catalyst separation and higher catalyst cost. There- fore, the catalyst loading （45 ton） is recommended for the industrial demonstration SBCR operation at syngas H2/ CO = 1.3, and the C5 ＋ yield is about 402 ton＂ per day, which has an about 16% increase than the industrial dem- onstration run result.展开更多
A new heuristic algorithm is proposed for the problem of finding the minimummakespan in the job-shop scheduling problem. The new algorithm is based on the principles ofparticle swarm optimization (PSO). PSO employs a ...A new heuristic algorithm is proposed for the problem of finding the minimummakespan in the job-shop scheduling problem. The new algorithm is based on the principles ofparticle swarm optimization (PSO). PSO employs a collaborative population-based search, which isinspired by the social behavior of bird flocking. It combines local search (by self experience) andglobal search (by neighboring experience), possessing high search efficiency. Simulated annealing(SA) employs certain probability to avoid becoming trapped in a local optimum and the search processcan be controlled by the cooling schedule. By reasonably combining these two different searchalgorithms, a general, fast and easily implemented hybrid optimization algorithm, named HPSO, isdeveloped. The effectiveness and efficiency of the proposed PSO-based algorithm are demonstrated byapplying it to some benchmark job-shop scheduling problems and comparing results with otheralgorithms in literature. Comparing results indicate that PSO-based algorithm is a viable andeffective approach for the job-shop scheduling problem.展开更多
In a low energy moon return mission, due to the weak stability of the orbit, it is necessary to implement an accurate orbital maneuver to guarantee a successful return. During the process of getting the optimal thrust...In a low energy moon return mission, due to the weak stability of the orbit, it is necessary to implement an accurate orbital maneuver to guarantee a successful return. During the process of getting the optimal thrust control with these two kinds of methods, it is hard to guess the initial value of the co-states in the indirect method while a large amount of calculation is needed to insure the precision in the direct method. To solve the problem, in this paper a combined method is given which has the merit of both direct and indirect methods. In this method, the virtual satellite method(VSM) and the Gauss pseudo-spectral method(GPM)are applied, while the fuel optimal control strategy is computed with GPM to carry out a soft rendezvous between the spacecraft and a hypothetical virtual satellite running on the nominal low energy return orbit so that the spacecraft will enter the return orbit accurately. Compared with the direct and indirect methods, this combined method can avoid guessing the initial value of the co-states and the complexity of calculation is acceptable. According to the simulation results, the spacecraft is inserted to the target return orbit with a high accuracy and also the optimization is very effective.展开更多
文摘The glass curtain wall is widely favored by the owners for its good appearance modeling efthct. In using process, however, excessive energy consumption, low level indoor eomtort and other problems of glass curtain wall are often exposed. Aiming at office buildings in hot Summer and cold Winter zone, taking the optimization of thermal comfort of double glass curtain wall in the summer and the reduetion of building energy consumption throughout the year as the breakthrough point, using the method of energy simulation analysis, through changing the size of internal shading component in the simulated room, this paper analyzes and summarizes the variation law of its energy consumption value, to explore the relatively reasonable design plan of shading systems of the building with glass curtain wall.
文摘A new concentration transducer for the measurement of gas/solid two-phase flow in the profile of pipeline was studied. The design of grid electrode was employed, and hence the distribute of electric field in the space was homogeneous effectively. The variance of measurement value for the influence of flow regime variations has greatly reduced, and the precision of measurement was improved. Meanwhile, optimization of axial property in the grid electrode increases the ability of tracing and measuring of the concentration signal in real-time.
文摘In response to the deficiencies of commonly used optimization methods for assembly lines,a production demand-oriented optimization method for assembly lines is proposed.Taking a certain compressor assembly line as an example,the production rhythm and the number of workstations are calculated based on production requirements and working systems.With assembly rhythm and smoothing index as optimization goals,an improved particle swarm optimization algorithm is employed for process allocation.Subsequently,Flexsim simulation is used to analyze the assembly line.The final results show that after optimization using the improved particle swarm algorithm,the assembly line balance rate increased from 71.1%to 85.9%,and the assembly line smoothing index decreased from 47.4 to 29.8,significantly enhancing assembly efficiency.This demonstrates the effectiveness of the proposed optimization method for the assembly line and provides a reference for other products in the same industry.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2002AA411030)National Defense Foundation Scientific Research of China (Grant No. d2520061124)
文摘Network-based manufacturing is a kind of distributed system, which enables manufacturers to finish production tasks as well as to grasp the opportunities in the market, even if manufacturing resources are insufficient. One of the main problems in network-based manufacturing is the allocation of resources and the assignment of tasks rationally, according to flexible resource distribution. The mapping rules and relations between production techniques and resources are proposed, followed by the definition of the resource unit. Ultimately, the genetic programming method for the optimization of the manufacturing system is put forward. A set of software for the optimization system of simulation process using genetic programming techniques has been developed, and the problems of manufacturing resource planning in network-based manufacturing are solved with the simulation of optimizing methods by genetic programming. The optimum proposal of hardware planning, selection of company and scheduling will be obtained in theory to help company managers in scientific decision-making.
文摘We present a novel system productivity simulation and optimization modeling framework in which equipment availability is a variable in the expected productivity function of the system. The framework is used for allocating trucks by route according to their operating performances in a truck-shovel system of an open-pit mine, so as to maximize the overall productivity of the fleet. We implement the framework in an originally designed and specifically developed simulator-optimizer software tool. We make an application on a real open-pit mine case study taking into account the stochasticity of the equipment behavior and environment. The total system production values obtained with and without considering the equipment reliability, availability and maintainability (RAM) characteristics are compared. We show that by taking into account the truck and shovel RAM aspects, we can maximize the total production of the system and obtain specific information on the production availability and productivity of its components.
基金National Natural Science Foundation of China(No.50179032)Natural Science Foundation of Tianjin(No.000345)
文摘With the aim of visualizing the real-time simulation calculation of water delivery system (WDS), a structural drawing-oriented (SDO) simulation technique was presented, and applied to Zhangjiuhe Diversion Project, which is a long-distance water delivery system constructed for draw- ing water from the Zhangjiuhe River to Kunming city. Taking SIMULINK software as simulating plat-form, the technique established a visual dynamic simulation model for the system. The simulation procedure of the system was simplified,and the efficiency of modeling was also enhanced according to the modularization and reutilization of the simulation program. Furthermore, a self-optimization model was presented. Based on the digital simulation models, the on line controlled optimization link was added, and the input data can be continually optimized according to the feedback information of simulating output. The system was thus optimized automatically. Built upon MATLAB software, simulation optimization of the Zhangjiuhe Diversion Project was achieved, which provides a new way for the research of optimal operation of WDS.
基金National Natural Science Foundation of China under Grant Nos.51639006 and 51725901
文摘Finite element（FE） is a powerful tool and has been applied by investigators to real-time hybrid simulations（RTHSs）. This study focuses on the computational efficiency, including the computational time and accuracy, of numerical integrations in solving FE numerical substructure in RTHSs. First, sparse matrix storage schemes are adopted to decrease the computational time of FE numerical substructure. In this way, the task execution time（TET） decreases such that the scale of the numerical substructure model increases. Subsequently, several commonly used explicit numerical integration algorithms, including the central difference method（CDM）, the Newmark explicit method, the Chang method and the Gui-λ method, are comprehensively compared to evaluate their computational time in solving FE numerical substructure. CDM is better than the other explicit integration algorithms when the damping matrix is diagonal, while the Gui-λ（λ = 4） method is advantageous when the damping matrix is non-diagonal. Finally, the effect of time delay on the computational accuracy of RTHSs is investigated by simulating structure-foundation systems. Simulation results show that the influences of time delay on the displacement response become obvious with the mass ratio increasing, and delay compensation methods may reduce the relative error of the displacement peak value to less than 5% even under the large time-step and large time delay.
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2011AA110502)the National Natural Science Foundation of China (Grant No. 71271022)
文摘Optimizing train movement has a great significance for railway traffic. In this paper, based on the optimal velocity car-following model, we propose a new simulation model for optimizing train movement in railway traffic. Here a kind of single-track railway is considered. Our aim is to reduce the energy consumption of train movement and ensure the train being on time by controlling the velocity curve of train movement. The simulation results indicate that the proposed model is effective for optimizing train movement. In addition, some major characteristics of train movement can be well captured. This method provides a new way to optimize train movement in railway traffic.
基金Supported by the National Natural Science Foundation of China(70272002) .
文摘In order to solve the complex optimization problem dealing with uncertain phenomenon effectively, this paper presents a probability simulation optimization approach using orthogonal genetic algorithm. This approach synthesizes the computer simulation technology, orthogonal genetic algorithm and statistical test method faultlessly, which can solve complex optimization problem effectively. In this paper, the author gives the correlative conception of probability simulation optimization and describes the probability simulation optimization approach using orthogonal genetic algorithm in detail. Theoretically speaking, it has a strong rationality and maneuverability that can apply probability method in solving the complex optimization problems with uncertain phenomenon. In demonstration, the optimization performance of this method is better than other traditional methods. Simulation resuh suggests that the approach referred to this paper is feasible, correct and valid.
基金This work was supported by the National Natural Science Foundation of China(21878066).
文摘A new vapor distributor based on the Coanda effect is added to the Dividing Wall column(DWC),and the multiphase flow simulation is performed using ANSYS Fluent by this model.The results show that with the addition of the liquid phase,the new vapor distributor still follows the Coanda effect.Hereby,the vapor is ejected from the slits of the distributor to take away the surrounding vapor,and a negative pressure is formed under the distributor,so as to achieve the purpose of regulating Rv.Analogously to the working principle of vapor distributor,a certain amount of vapor is drawn out from a position of prefractionator,which is equivalent to the vapor ejected by the distributor.The same amount of vapor is fed into the main column,which corresponds to the gas phase at the inlet of the distributor.The Rv is adjusted by changing the speed of the input or output vapor.Simulation results show that adding this control mechanism on the basis of temperature or concentration control structure can better achieve the effect of vapor distribution.
基金supported by China National Heavy Duty Truck Group Co.,Ltd.(Grant No.YF03221048P)the Shanghai Municipal Bureau of Market Supervision and Administration(Grant No.2022-35)New Young TeachersResearch Start-Up Foundation of Shanghai Jiao Tong University(Grant No.22X010503668).
文摘As the take-off of China’s macro economy,as well as the rapid development of infrastructure construction,real estate industry,and highway logistics transportation industry,the demand for heavy vehicles is increasing rapidly,the competition is becoming increasingly fierce,and the digital transformation of the production line is imminent.As one of themost important components of heavy vehicles,the transmission front andmiddle case assembly lines have a high degree of automation,which can be used as a pilot for the digital transformation of production.To ensure the visualization of digital twins(DT),consistent control logic,and real-time data interaction,this paper proposes an experimental digital twin modeling method for the transmission front and middle case assembly line.Firstly,theDT-based systemarchitecture is designed,and theDT model is created by constructing the visualization model,logic model,and data model of the assembly line.Then,a simulation experiment is carried out in a virtual space to analyze the existing problems in the current assembly line.Eventually,some improvement strategies are proposed and the effectiveness is verified by a new simulation experiment.
文摘Predictive control has recently received much attention from researchers. However a challenging problem to be solved is how to tune the parameters of the predictive controller. So far, only few guidelines related to tuning of the parameters of predictive controllers have been provided in literature. In practice, these parameters are generally off-line determined by the designers' experience. From the point of view of process control, it is difficult to find out the optimal parameters for the control system based on a single quadratic performance index, which is used in the standard predictive control algorithm. The fuzzy decision-making function is investigated in this paper. Firstly, M control actions are achieved by unconstrained predictive control algorithm, and fuzzy goals and fuzzy constraints are then calculated and the global satisfaction degree is obtained by fuzzy inference. Moreover, the weighting coefficient λ in the cost function is tuned using simulation optimization according to the fuzzy criteria.
基金Supported by the National Key Basic Research Program of China(1030021210710)
文摘Boiling heat transfer and the controllability of the thermal load of the cylinder head were studied.The thermodynamic phase change characteristics of the cylinder head coolant were considered and the mass,momentumand energy transfers between two phases were calculated with the interface transfer submodels by using the computational fluid dynamics software CFX. Results showed that compared with the single-phase flow without considering the boiling heat transfer,the sub-cooled boiling heat transfer of the cylinder head was greatly increased. According to the results of the numerical simulation,an optimized structure of the water jacket was proposed. Finally,temperature and velocity of coolant,diameter of flow passage and mean bubble diameter that influences sub-cooled boiling were studied using the orthogonal experiment method.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC3702200)the National Natural Science Foundation of China(Grant Nos.42372279 and U2267218)the Natural Science Foundation of Anhui Province(Grant No.JZ2022AKZR0451).
文摘Constructing impermeable curtains to contain contaminant in aquifers is a costly and complex process that can impact the structure integrity of aquifer systems.Are impermeable curtains necessary for a groundwater contaminant remediation project?This study evaluates the necessity of impermeable curtains for groundwater contaminant remediation projects.Specifically,it considers remediation efforts based on the Pump and Treat(PAT)technique under various hydrogeological conditions and contaminant properties,comparing the total remediation cost and effectiveness.To further investigate,a multi-objective simulation and optimization model,utilizing the Multi-Objective Fast Harmony Search(MOFHS)algorithm,was employed to identify optimal groundwater remediation system designs that without impermeable curtains.Both a two-dimensional(2-D)hypothetical example and a three-dimensional(3-D)field example were used to assess the necessity of constructing impermeable curtains.The 2-D hypothetical example demonstrated that the installation of impermeable curtain is justified only when the dispersivity(αL)of the contaminant reaches 100 meters.In most cases,particularly at sites with porosity(n)under 0.3,alternative,more cost-effective,and efficient remediation strategies may be available,making impermeable barriers unnecessary.The optimization results of the 3-D field example further corroborate the conclusions derived from the 2-D hypothetical example.These findings provide valuable guidance for more scientifically informed,reasonable,and cost-effective groundwater contaminant remediation projects.
基金funded by the Key Science and Technology Research Projects of Henan Province(252102320172).
文摘Climate change significantly affects vegetation dynamics.Thus,understanding interactions between vegetation and climatic factors is essential for ecological management.This study used kernel Normalized Difference Vegetation Index(kNDVI)and climatic data(temperature,precipitation,humidity,and vapor pressure deficit(VPD))of China from 2000 to 2022,integrating Geographic Convergent Cross Mapping(GCCM)causal modeling,Extreme Gradient Boosting-Shapley Additive Explanations(XGBoost-SHAP)nonlinear threshold identification,and Geographical Simulation and Optimization Systems-Future Land Use Simulation(GeoSOS-FLUS)spatial prediction modeling to investigate vegetation spatiotemporal characteristics,driving mechanisms,nonlinear thresholds,and future spatial patterns.Results indicated that from 2000 to 2022,China's kNDVI showed an overall increasing trend(annual average ranging from 0.29 to 0.33 with distinct spatial differentiation:52.77%of areas locating in agricultural and ecological restoration regions in the central-eastern plain)experienced vegetation improvement,whereas 2.68%of areas locating in the southeastern coastal urbanized regions and the Yangtze River Delta experience vegetation degradation.The coefficient of variation(CV)of kNDVI at 0.30–0.40(accounting for 10.61%)was significantly higher than that of NDVI(accounting for 1.80%).Climate-driven mechanisms exhibited notable library length(L)dependence.At short-term scales(L<50),vegetation-driven transpiration regulated local microclimate,with a causal strength from kNDVI to temperature of 0.04–0.15;at long-term scales(L>100),cumulative temperature effects dominated vegetation dynamics,with a causal strength from temperature to kNDVI of 0.33.Humidity and kNDVI formed bidirectional positive feedback at long-term scales(L=210,causal strength>0.70),whereas the long-term suppressive effect of VPD was particularly pronounced(causal strength=0.21)in arid areas.The optimal threshold intervals identified were temperature at–12.18℃–0.67℃,precipitation at 24.00–159.74 mm,humidity of lower than 22.00%,and VPD of<0.07,0.17–0.24,and>0.30 kPa;notably,the lower precipitation threshold(24.00 mm)represented the minimum water requirements for vegetation recovery in arid areas.Future kNDVI spatial patterns are projected to continue the trend of"southeastern optimization and northwestern delay"from 2025 to 2040:the area proportion of high kNDVI value(>0.50)will rise from 40.43%to 41.85%,concentrated in the Sichuan Basin and the southern hills;meanwhile,the proportion of low-value areas of kNDVI(0.00–0.10)in the arid northwestern areas will decline by only 1.25%,constrained by sustained temperature and VPD stress.This study provides a scientific basis for vegetation dynamic regulation and sustainable development under climate change.
基金the National Natural Science Foundation of China (31000731)China Agriculture Research System (CARS-19-E12)
文摘As the most important cultural practices for ramie （Boehmeria nivea） production, the single effects of plant density and nitrogen （N）, phosphorus （P）, potassium （K） fertilization on yield are well documented. To achieve the high yield and quality of ramie fiber, it is principal to quantify the fertilizer dosage for ramie sustainable production. A central composite design （CCD） was adopted with three replications, for a two-year field experiment （2008-2009） in the Yangtze River Valley of China. The aim was to evaluate both the individual and combined effects of plant density and N, P, and K fertilization on yield and fiber quality. The effects of the four factors on yield and quality of ramie cultivar Huazhu 4 were tested. Then mathematical models of the relationship among the four factors affecting ramie production and quality were established and analyzed to optimize the four factors, and used to establish optimum cultivation methods for the elite cultivar suitable to this area of the Yangtze River Valley. Supplements of N （X2）, P 0（3） and K 0（4）, and the density （X0 with N （X2） interaction significantly influenced strength in tests of mature ramie. The influence on fiber yield in the two year tests by the four factors ranked as follows： X3〉X4〉X~〉X2. We established the optimization technique attaining yield of 2 600 kg ha-~ in the tests as following： density of 28 350-31 650 plants ha-1, and supplements of N, P and K of 363-387, 98.58-105.48 and 280.20- 319.8 kg ha-1, respectively. It was concluded that nitrogen mostly improved plant growth and fiber yield while potassium had discernible effects on fiber quality.
基金This work was supported by the National Natural Science Foundation of China(Grant No.11872157 and 11532013)the graduate innovative research project of Heilongjiang University of Science and Technology(Grant No.YJSCX2020-214HKD).
文摘The current Whale Optimization Algorithm(WOA)has several drawbacks,such as slow convergence,low solution accuracy and easy to fall into the local optimal solution.To overcome these drawbacks,an improved Whale Optimization Algorithm(IWOA)is proposed in this study.IWOA can enhance the global search capability by two measures.First,the crossover and mutation operations in Differential Evolutionary algorithm(DE)are combined with the whale optimization algorithm.Second,the cloud adaptive inertia weight is introduced in the position update phase of WOA to divide the population into two subgroups,so as to balance the global search ability and local development ability.ANSYS and Matlab are used to establish the structure model.To demonstrate the application of the IWOA,truss structural optimizations on 52-bar plane truss and 25-bar space truss were performed,and the results were are compared with that obtained by other optimization algorithm.It is verified that,compared with WOA,the IWOA has higher efficiency,fast convergence speed,better solution accuracy and stability.So IWOA can be used in the optimization design of large truss structures.
基金Supported by the National Key R&D Program of China(2017YFB0602500)
文摘To optimize industrial Fischer-Tropsch （IT） synthesis with the slurry bubble column reactor （SBCR） and iron- based catalyst, a comprehensive process model for IT synthesis that includes a detailed SBCR model, gas liquid separation model, simplified CO2 removal model and tail gas cycle model was developed. An effective iteration algorithm was proposed to solve this process model, and the model was validated by industrial demonstration experiments data （SBCR with 5.8 m diameter and 30 m height）, with a maximum relative error 〈 10% for predicting the SBCR performances. Subsequently, the proposed model was adopted to optimize the industrial SBCR performances simultaneously considering process and reactor parameters variations. The results show that C5＋yield increases as catalyst loading increases within 10-70 ton and syngas H2/CO value decreases within 1.3-1.6, but it doesn＇t increase obviously when the catalyst loading exceeds 45 ton （about 15 wt% concentration）. Higher catalyst loading will result in higher difficulty for wax/catalyst separation and higher catalyst cost. There- fore, the catalyst loading （45 ton） is recommended for the industrial demonstration SBCR operation at syngas H2/ CO = 1.3, and the C5 ＋ yield is about 402 ton＂ per day, which has an about 16% increase than the industrial dem- onstration run result.
基金This project is supported by National Natural Science Foundation of China (No.70071017).
文摘A new heuristic algorithm is proposed for the problem of finding the minimummakespan in the job-shop scheduling problem. The new algorithm is based on the principles ofparticle swarm optimization (PSO). PSO employs a collaborative population-based search, which isinspired by the social behavior of bird flocking. It combines local search (by self experience) andglobal search (by neighboring experience), possessing high search efficiency. Simulated annealing(SA) employs certain probability to avoid becoming trapped in a local optimum and the search processcan be controlled by the cooling schedule. By reasonably combining these two different searchalgorithms, a general, fast and easily implemented hybrid optimization algorithm, named HPSO, isdeveloped. The effectiveness and efficiency of the proposed PSO-based algorithm are demonstrated byapplying it to some benchmark job-shop scheduling problems and comparing results with otheralgorithms in literature. Comparing results indicate that PSO-based algorithm is a viable andeffective approach for the job-shop scheduling problem.
基金supported by National Natural Science Foundation of China(No.11172077)Autonomous Space System laboratory(ASSL) of Harbin Institute of Technology
文摘In a low energy moon return mission, due to the weak stability of the orbit, it is necessary to implement an accurate orbital maneuver to guarantee a successful return. During the process of getting the optimal thrust control with these two kinds of methods, it is hard to guess the initial value of the co-states in the indirect method while a large amount of calculation is needed to insure the precision in the direct method. To solve the problem, in this paper a combined method is given which has the merit of both direct and indirect methods. In this method, the virtual satellite method(VSM) and the Gauss pseudo-spectral method(GPM)are applied, while the fuel optimal control strategy is computed with GPM to carry out a soft rendezvous between the spacecraft and a hypothetical virtual satellite running on the nominal low energy return orbit so that the spacecraft will enter the return orbit accurately. Compared with the direct and indirect methods, this combined method can avoid guessing the initial value of the co-states and the complexity of calculation is acceptable. According to the simulation results, the spacecraft is inserted to the target return orbit with a high accuracy and also the optimization is very effective.
