Restructuring of power market not only introduces competition but also brings complexity which increases overloading of Transmission Lines(TL).To obviate this complexity,this paper aims to mitigate the overloading and...Restructuring of power market not only introduces competition but also brings complexity which increases overloading of Transmission Lines(TL).To obviate this complexity,this paper aims to mitigate the overloading and estimate the optimal location of Static Synchronous Compensator(STATCOM) by reducing congestion for a deregulated power system.The proposed method is based on the use of Locational Marginal Price(LMP) difference technique and congestion cost.LMPs are obtained as a by-product of Optimal Power Flow(OPF),whereas Congestion Cost(CC) is a function of difference in LMP and power flows.The effiectiveness of this approach is demonstrated by reducing the CC and solution space which can identify the TLs more suitable for placement of STATCOM.Importantly,total real power loss,reactive power loss and total CC are the three main objective functions in this optimization process.The process is implemented by developing an IEEE-69 bus test system which verifies and validates the effectiveness of proposed optimization technique.Additionally,a comparative analysis is enumerated by implementing two optimization techniques:Flower Pollination Algorithm(FPA) and Particle Swarm Optimization(PSO).The comparative analysis is sufficient to demonstrate the superiority of FPA technique over PSO technique in estimating an optimal placement of a STATCOM.The results from the load-flow analysis illustrate the reduction in CC,total real and reactive power loss using FPA technique compared to PSO technique.Overall,satisfactory results are obtained without using complex calculations which verify the effectiveness of optimization techniques.展开更多
Hybrid renewable energy systems(HRES)offer cost-effectiveness,low-emission power solutions,and reduced dependence on fossil fuels.However,the renewable energy allocation problem remains challenging due to complex syst...Hybrid renewable energy systems(HRES)offer cost-effectiveness,low-emission power solutions,and reduced dependence on fossil fuels.However,the renewable energy allocation problem remains challenging due to complex system interactions and multiple operational constraints.This study develops a novel Multi-Neighborhood Enhanced Harris Hawks Optimization(MNEHHO)algorithm to address the allocation of HRES components.The proposed approach integrates key technical parameters,including charge-discharge efficiency,storage device configurations,and renewable energy fraction.We formulate a comprehensive mathematical model that simultaneously minimizes levelized energy costs and pollutant emissions while maintaining system reliability.The MNEHHO algorithm employs multiple neighborhood structures to enhance solution diversity and exploration capabilities.The model’s effectiveness is validated through case studies across four distinct institutional energy demand profiles.Results demonstrate that our approach successfully generates practically feasible HRES configurations while achieving significant reductions in costs and emissions compared to conventional methods.The enhanced search mechanisms of MNEHHO show superior performance in avoiding local optima and achieving consistent solutions.Experimental results demonstrate concrete improvements in solution quality(up to 46% improvement in objective value)and computational efficiency(average coefficient of variance of 24%-27%)across diverse institutional settings.This confirms the robustness and scalability of our method under various operational scenarios,providing a reliable framework for solving renewable energy allocation problems.展开更多
This paper presents a solution for energy storage system capacity configuration and renewable energy integration in smart grids using a multi-disciplinary optimization method.The solution involves a hybrid prediction ...This paper presents a solution for energy storage system capacity configuration and renewable energy integration in smart grids using a multi-disciplinary optimization method.The solution involves a hybrid prediction framework based on an improved grey regression neural network(IGRNN),which combines grey prediction,an improved BP neural network,and multiple linear regression with a dynamic weight allocation mechanism to enhance prediction accuracy.Additionally,an improved cuckoo search(ICS)algorithm is designed to empower the neural network model,incorporating a gamma distribution disturbance factor and adaptive inertia weight to balance global exploration and local exploitation,achieving a 40%faster convergence rate.A multi-objective snake optimization algorithm is also developed to optimize economic cost,grid stability,and energy utilization efficiency using energy storage capacity as the decision variable.The experimental results,based on a 937-day load dataset from a chemical park in Jiangsu Province,show that the IGRNN model has better prediction accuracy than traditional models,with an RMSE of 11.1361,an MAE of 8.264,and an R^(2) of 96.90%.The optimized energy storage system stabilizes the daily load curve at 800 kW,reduces the peak-valley difference by 62%,and decreases grid regulation pressure by 58.3%.This research provides theoretical and practical support for energy storage planning in high renewable energy proportion grids.Future work will focus on integrating weather data and dynamic optimization strategies under policy constraints to improve system applicability in real-world scenarios.展开更多
In recent years, particle swarm optimization (PSO) has received widespread attention in feature selection due to its simplicity and potential for global search. However, in traditional PSO, particles primarily update ...In recent years, particle swarm optimization (PSO) has received widespread attention in feature selection due to its simplicity and potential for global search. However, in traditional PSO, particles primarily update based on two extreme values: personal best and global best, which limits the diversity of information. Ideally, particles should learn from multiple advantageous particles to enhance interactivity and optimization efficiency. Accordingly, this paper proposes a PSO that simulates the evolutionary dynamics of species survival in mountain peak ecology (PEPSO) for feature selection. Based on the pyramid topology, the algorithm simulates the features of mountain peak ecology in nature and the competitive-cooperative strategies among species. According to the principles of the algorithm, the population is first adaptively divided into many subgroups based on the fitness level of particles. Then, particles within each subgroup are divided into three different types based on their evolutionary levels, employing different adaptive inertia weight rules and dynamic learning mechanisms to define distinct learning modes. Consequently, all particles play their respective roles in promoting the global optimization performance of the algorithm, similar to different species in the ecological pattern of mountain peaks. Experimental validation of the PEPSO performance was conducted on 18 public datasets. The experimental results demonstrate that the PEPSO outperforms other PSO variant-based feature selection methods and mainstream feature selection methods based on intelligent optimization algorithms in terms of overall performance in global search capability, classification accuracy, and reduction of feature space dimensions. Wilcoxon signed-rank test also confirms the excellent performance of the PEPSO.展开更多
Accurate identification of unknown internal parameters in photovoltaic(PV)cells is crucial and significantly affects the subsequent system-performance analysis and control.However,noise,insufficient data acquisition,a...Accurate identification of unknown internal parameters in photovoltaic(PV)cells is crucial and significantly affects the subsequent system-performance analysis and control.However,noise,insufficient data acquisition,and loss of recorded data can deteriorate the extraction accuracy of unknown parameters.Hence,this study proposes an intelligent parameter-identification strategy that integrates artificial ecosystem optimization(AEO)and a Bayesian neural network(BNN)for PV cell parameter extraction.A BNN is used for data preprocessing,including data denoising and prediction.Furthermore,the AEO algorithm is utilized to identify unknown parameters in the single-diode model(SDM),double-diode model(DDM),and three-diode model(TDM).Nine other metaheuristic algorithms(MhAs)are adopted for an unbiased and comprehensive validation.Simulation results show that BNN-based data preprocessing com-bined with effective MhAs significantly improve the parameter-extraction accuracy and stability compared with methods without data preprocessing.For instance,under denoised data,the accuracies of the SDM,DDM,and TDM increase by 99.69%,99.70%,and 99.69%,respectively,whereas their accuracy improvements increase by 66.71%,59.65%,and 70.36%,respectively.展开更多
Accurate quantification of carbon and water fluxes dynamics in arid and semi-arid ecosystems is a critical scientific challenge for regional carbon neutrality assessments and sustainable water resource management.In t...Accurate quantification of carbon and water fluxes dynamics in arid and semi-arid ecosystems is a critical scientific challenge for regional carbon neutrality assessments and sustainable water resource management.In this study,we developed a multi-flux global sensitivity discriminant index(D_(sen))by integrating the Biome-BGCMuSo model with eddy covariance flux observations.This index was combined with a Bayesian optimization algorithm to conduct parameter optimization.The results demonstrated that:(1)Sensitivity analysis identified 13 highly sensitive parameters affecting carbon and water fluxes.Among these,the canopy light extinction coefficient(k)and the fraction of leaf N in Rubisco(FLNR)exhibited significantly higher sensitivity to carbon fluxes(GPP,NEE,Reco;D_(sen)>10%)compared to water flux(ET).This highlights the strong dependence of carbon cycle simulations on vegetation physiological parameters.(2)The Bayesian optimization framework efficiently converged 30 parameter spaces within 50 iterations,markedly improving carbon fluxes simulation accuracy.The Kling-Gupta efficiency(KGE)values for Gross Primary Production(GPP),Net Ecosystem Exchange(NEE),and Total Respiration(Reco)increased by 44.94%,69.23%and 123%,respectively.The optimization prioritized highly sensitive parameters,underscoring the necessity of parameter sensitivity stratification.(3)The optimized model effectively reproduced carbon sink characteristics in mountain meadows during the growing season(cumulative NEE=-375 g C/m^(2)).It revealed synergistic carbon-water fluxes interactions governed by coupled photosynthesis-stomatal pathways and identified substrate supply limitations on heterotrophic respiration.This study proposes a novel multi-flux sensitivity index and an efficient optimization framework,elucidating the coupling mechanisms between vegetation physiological regulation(k,FLNR)and environmental stressors(VPD,SWD)in carbonwater cycles.The methodology offers a practical approach for arid ecosystem model optimization and provides theoretical insights for grassland management through canopy structure regulation and water-use efficiency enhancement.展开更多
Exploring optimal operational schemes for synergistic development is crucial for sustainable management in river basins.This study introduces a multi-objective synergistic optimization framework aimed at analyzing the...Exploring optimal operational schemes for synergistic development is crucial for sustainable management in river basins.This study introduces a multi-objective synergistic optimization framework aimed at analyzing the interplay among flood control,ecological integrity,and desilting objectives under varying watersediment conditions.The framework encompasses multi-objective reservoir optimal operation,scheme decision,and trade-off analysis among competing objectives.To address the optimization model,an elite mutation-based multiobjective particle swarm optimization(MOPSO)algorithm that integrates genetic algorithms(GA)is developed.The coupling coordination degree is employed for optimal scheme decision-making,allowing for the adjustment of weight ratios to investigate the trade-offs between objectives.This research focuses on the Sanmenxia and Xiaolangdi cascade reservoirs in the Yellow River,utilizing three representative hydrological years:1967,1969,and 2002.The findings reveal that:(1)the proposed model effectively generates Pareto fronts for multi-objective operations,facilitating the recommendation of optimal schemes based on coupling coordination degrees;(2)as water-sediment conditions shift from flooding to drought,competition intensifies between the flood control and desilting objectives.While flood control and ecological objectives compete during flood and dry years,they demonstrate synergies in normal years(r=0.22);conversely,ecological and desilting objectives are consistently competitive across all three typical years,with the strongest competition observed in the normal year(r=-0.95);(3)the advantages conferred to ecological objectives increase as water-sediment conditions shift from flooding to drought.However,the promotion of the desilting objective requires more complex trade-offs.This study provides a model and methodological approach for the multi-objective optimization of flood control,sediment management,and ecological considerations in reservoir clusters.Moreover,the methodologies presented herein can be extended to other water resource systems for multi-objective optimization and decision-making.展开更多
In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the op...In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.展开更多
The Wuding River Basin,situated in the Loess Plateau of northern China,is an ecologically fragile region facing severe soil erosion and imbalanced ecosystem service(ES)functions.However,the mechanisms driving the spat...The Wuding River Basin,situated in the Loess Plateau of northern China,is an ecologically fragile region facing severe soil erosion and imbalanced ecosystem service(ES)functions.However,the mechanisms driving the spatiotemporal evolution of ES functions,as well as the trade-offs and synergies among these functions,remain poorly understood,constraining effective watershed-scale management.To address this challenge,this study quantified four ES functions,i.e.,water yield(WY),carbon storage(CS),habitat quality(HQ),and soil conservation(SC)in the Wuding River Basin from 1990 to 2020 using the Integrated Valuation of Ecosystem Services and Tradeoff(InVEST)model,and proposed an innovative integration of InVEST with a Bayesian Belief Network(BBN)to nonlinearly identify trade-off and synergy relationships among ES functions through probabilistic inference.A trade-off and synergy index(TSI)was developed to assess the spatial interaction intensity among ES functions,while sensitivity and scenario analyses were employed to determine key driving factors,followed by spatial optimization to delineate functional zones.Results revealed distinct spatiotemporal variations:WY increased from 98.69 to 120.52 mm;SC rose to an average of 3.05×10^(4) t/hm^(2);CS remained relatively stable(about 15.50 t/km^(2));and HQ averaged 0.51 with localized declines.The BBN achieved a high accuracy of 81.9%and effectively identified strong synergies between WY and SC,as well as between CS and HQ,while clear trade-offs were observed between WY and SC versus CS and HQ.Sensitivity analysis indicated precipitation(variance reduction of 9.4%),land use(9.8%),and vegetation cover(9.1%)as key driving factors.Spatial optimization further showed that core supply and ecological regulation zones are concentrated in the central-southern and southeastern basin,while ecological strengthening and optimization core zones dominate the central-northern and southeastern margins,highlighting strong spatial heterogeneity.Overall,this study advances ES research by combining process-based quantification with probabilistic modeling,offering a robust framework for studying nonlinear interactions,driving mechanisms,and optimization strategies,and providing a transferable paradigm for watershed-scale ES management and ecological planning in arid and semi-arid areas.展开更多
The ecological costs of open pit metal mining are quantified, which include lost value of direct eco-services, lost value of indirect eco-services, prevention and restoration costs, and cost of carbon emission from en...The ecological costs of open pit metal mining are quantified, which include lost value of direct eco-services, lost value of indirect eco-services, prevention and restoration costs, and cost of carbon emission from energy consumption. These ecological costs are incorporated in an iterative ultimate pit optimization algorithm. A case study is presented to demonstrate the influence of ecological costs on pit design outcome. The results show that it is possible to internalize ecological costs in mine designs. The pit optimization outcome shifts considerably to the conservative side and the profitability decreases substantially when ecological costs are accounted for.展开更多
The manufacturing cost is a significant factor that must be considered in the structural design of a composite wing. A multi-objective optimization method for the tradeoff between manufacturing cost and weight of comp...The manufacturing cost is a significant factor that must be considered in the structural design of a composite wing. A multi-objective optimization method for the tradeoff between manufacturing cost and weight of composite wing structure is de- veloped by integrating the manufacturing cost model into the traditional wing structural optimization. A two-level optimization method is proposed to carry out the tradeoff between manufacturing cost and weight, in which the design variables include both structural layout and dimensions and a cost model is incorporated into structural optimization. The manufacturing cost model for a composite wing and the detail procedure for solving this tradeoff problem are presented. The application of the method to the composite wing structural design of an unmanned aerial vehicle is illustrated to verify the method. The application indicates that the method is able to find the Pareto optimal set of minimum structural weight and manufacturing cost. Based on the Pareto optimal set, one can conduct the tradeoff between manufacturing cost and weight of wing structures.展开更多
A particle swarm optimization (PSO) algorithm improved by immunity algorithm (IA) was presented. Memory and self-regulation mechanisms of IA were used to avoid PSO plunging into local optima. Vaccination and immune se...A particle swarm optimization (PSO) algorithm improved by immunity algorithm (IA) was presented. Memory and self-regulation mechanisms of IA were used to avoid PSO plunging into local optima. Vaccination and immune selection mechanisms were used to prevent the undulate phenomenon during the evolutionary process. The algorithm was introduced through an application in the direct maintenance cost (DMC) estimation of aircraft components. Experiments results show that the algorithm can compute simply and run quickly. It resolves the combinatorial optimization problem of component DMC estimation with simple and available parameters. And it has higher accuracy than individual methods, such as PLS, BP and v-SVM, and also has better performance than other combined methods, such as basic PSO and BP neural network.展开更多
OBJECTIVE: To investigate the optimal dosage ratio of chlorogenic acid and gardenia glycosides in treating the rates with fatty liver disease induced by high-fat feed.METHODS: A rat model of non-alcoholic fatty liver ...OBJECTIVE: To investigate the optimal dosage ratio of chlorogenic acid and gardenia glycosides in treating the rates with fatty liver disease induced by high-fat feed.METHODS: A rat model of non-alcoholic fatty liver disease(NAFLD) was established by using a high-fat diet. According to mathematical model "uniform design", varying doses of chlorogenic acid and gardenia glycosides have been combined to form 6 medications for the treatment of NAFLD.Samples were then taken to observe pathological changes of the liver tissue(HE staining); changes in the fat metabolism pathway e.g. triglyceride(TG)and free fatty acid(FFA) content; alterations in liver function, i.e. serum alanine aminotransferase(ALT)and aspartate aminotransferase(AST) activity; and differences in Malondialdehyde(MDA) and superoxide dismutase(SOD) content in the liver tissue. Multiple regression analysis was conducted to test the optimal dosage ratio of chlorogenic acid and gardenia glycosides.RESULTS: Fatty degeneration and vacuole-like changes of different degrees occurred in hepatic cells of the model group. Markers for fat metabolism, serum ALT and AST activities, and expression of MDA in liver tissue significantly increased, while SOD decreased. Combination of 90 mg chlorogenic acid and 90 mg Gardenia glycosides was the optimal dosage ratio of chlorogenic acid and gardenia glycosides in the treatment of rats with fatty liver induced by high-fat diet.CONCLUSION: Chlorogenic acid of 90 mg plus gardenia glycosides of 90 mg was the best combination in the treatment of fatty liver disease in rats induced by high-fat feed.展开更多
Prestressed wire winded framework （PWWF） is an advanced structure and the most expensive part in the large-scale equip- ment. The traditional design of PWWF is complicated, highly iterative and cost uncontrolable, b...Prestressed wire winded framework （PWWF） is an advanced structure and the most expensive part in the large-scale equip- ment. The traditional design of PWWF is complicated, highly iterative and cost uncontrolable, because PWWF is a variable stiffness multi-agent structure, with non-linear loading and deformation coordination. In this paper, cost optimization method of large-scale PWWF by multiple-island genetic algorithm （MIGA） is presented. Optimization design flow and optimization model are proposed based on variable-tension wire winding theory. An example of the PWWF cost optimization of isostatic equipment with axial load 6 000 kN is given. The optimization cost is reduced by 21.6% compared with traditional design. It has also been verified by the finite-element analysis and successfully applied to an actual PWWF design of isostatic press. The results show that this method is efficient and reliable. This method can also provide a guide for optimal design for ultra-large dimension muti-frame structure of 546 MN and 907 MN isostatic press equipment.展开更多
In drilling operation, a large saving in time and money would be achieved by reducing the drilling time, since some of the costs are time-dependent. Drilling time could be minimized by raising the penetration rate. In...In drilling operation, a large saving in time and money would be achieved by reducing the drilling time, since some of the costs are time-dependent. Drilling time could be minimized by raising the penetration rate. In the comparative optimization method, by using the records of the first drilled wells and comparing the criteria like penetration rate, cost per foot and specific energy, the drilling parameters of the next wells being drilled can be optimized in each depth interval. In the mathematical optimization technique, some numerical equations to model the penetration rate, bit wear rate and hydraulics would be used to minimize the drilling cost and time as much as possible and improve the results of the primary comparative optimization. In this research, as a case study the Iranian Khangiran gas field has been evaluated to optimize the drilling costs. A combination of the mentioned optimization techniques resulted in an optimal well which reduced the drilling time and cost considerably in comparison with the wells already drilled.展开更多
This paper considers a project scheduling problem with the objective of minimizing resource availability costs appealed to finish al activities before the deadline. There are finish-start type precedence relations amo...This paper considers a project scheduling problem with the objective of minimizing resource availability costs appealed to finish al activities before the deadline. There are finish-start type precedence relations among the activities which require some kinds of renewable resources. We predigest the process of sol-ving the resource availability cost problem （RACP） by using start time of each activity to code the schedule. Then, a novel heuris-tic algorithm is proposed to make the process of looking for the best solution efficiently. And then pseudo particle swarm optimiza-tion （PPSO） combined with PSO and path relinking procedure is presented to solve the RACP. Final y, comparative computational experiments are designed and the computational results show that the proposed method is very effective to solve RACP.展开更多
In terms of tandem cold mill productivity and product quality, a multi-objective optimization model of rolling schedule based on cost fimction was proposed to determine the stand reductions, inter-stand tensions and r...In terms of tandem cold mill productivity and product quality, a multi-objective optimization model of rolling schedule based on cost fimction was proposed to determine the stand reductions, inter-stand tensions and rolling speeds for a specified product. The proposed schedule optimization model consists of several single cost fi.mctions, which take rolling force, motor power, inter-stand tension and stand reduction into consideration. The cost function, which can evaluate how far the rolling parameters are from the ideal values, was minimized using the Nelder-Mead simplex method. The proposed rolling schedule optimization method has been applied successfully to the 5-stand tandem cold mill in Tangsteel, and the results from a case study show that the proposed method is superior to those based on empirical formulae.展开更多
The objective of this study is to develop a model that determines the optimal points for investment in green management by defining a mathematical relationship between carbon trading profits and investments in green m...The objective of this study is to develop a model that determines the optimal points for investment in green management by defining a mathematical relationship between carbon trading profits and investments in green management using a company’s supply chain information. To formulate this model, we first define and analyze a green supply chain in a multi-dimensional and quantitative manner. The green investment alternatives considering in our model are as follows: 1) purchasing eco-friendly raw materials that cost more than conventional raw materials but whose use in production results in lower CO2 emissions;2) replacing current facilities with new eco-friendly facilities that have the capability to reduce CO2 emissions;and 3) changing modes of transport from less eco-friendly to more eco-friendly modes. We propose a green investment cost optimization (GICO) model that enables us to determine the optimal investment points. The proposed GICO model can support decision-making processes in green supply chain management environments.展开更多
Series of experiments were performed to simulate the invasion of formation sand into and the plugging process of gravel-pack at different viscosities and flowing rates of fluid.Two types of formation sands with the me...Series of experiments were performed to simulate the invasion of formation sand into and the plugging process of gravel-pack at different viscosities and flowing rates of fluid.Two types of formation sands with the medium size of 0.10 mm and 0.16 mm and the quartz sand and ceramsite of 0.6-1.2 mm were used in the experiments.A new viscosity-velocity index(the product of fluid viscosity and velocity)was put forward to characterize the influencing mechanism and law of physical property and flow condition of formation fluid on gravel-pack plugging,and a new method to optimize the production rate of wells controlling sand production with gravel-packing was proposed.The results show that the permeability of formation sand invaded zone and final permeability of plugged gravel-pack have negative correlations with viscosity and flow velocity of fluid,the higher the flow velocity and viscosity,the lower the permeability of formation sand invaded zone and final permeability of plugged gravel-pack will be.The flow velocity and viscosity of fluid are key factors affecting plugging degree of the gravel zone.The viscosity-velocity index(v-v index)can reflect the flow characteristics of fluid very well and make it easier to analyze the plugging mechanism of gravel zone.For different combinations of fluid viscosity and flow velocity,if the v-v index is the same or close,their impact on the final gravel permeability would be the same or close.With the increase of the v-v index,the permeability of plugged gravel zone decreases first,then the reduction rate slows down till the permeability stabilizes.By optimizing production and increasing production step by step,the optimal working scheme for sand-control well can reduce the damage to gravel-pack zone permeability caused by sand-carrying fluid effectively,and increase well productivity and extend the sand control life.展开更多
The objective of this work was to determine the optimum size and amount of raw materials which influence the viscosity of ceramic paste using the experimental design for the production of tubular support by the extrus...The objective of this work was to determine the optimum size and amount of raw materials which influence the viscosity of ceramic paste using the experimental design for the production of tubular support by the extrusion technique and its application in microfiltration. The Box Behnken design was used to optimize the viscosity of the ceramic paste. ANOVA was used to model the system represented by independent parameters and dependent output response and to optimize the system by estimating the statistical parameters. A three-factor and three-level design was used generating thus 15 experiments. The independent factors were the amount of porogen, size of porogen and amount of binder and dependent factor the viscosity of the ceramic paste. The minimum (−1), intermediate (0) and maximum (+1) level of the amount of porogen, size of porogen and amount of binder used were 20 g, 30 g and 40 g, 50 μm, 100 μm and 150 μm, and 2 g, 3.5 g and 5 g respectively. The statistical analyses showed that the values of the answers would adapt to a second degree polynomial model. The R-square value obtained was greater than 95%, the Biais factor was equal to the unit and the Absolute Average Deviation (AAD) equal to the zero thus validating the model. The optimal size of raw material was found to be 100 μm for an amount of clay of 66 g, amount of porogen of 30 g and amount of binder of 4 g. The optimum viscosity of the ceramic paste was found to be 26.7 Pa∙s which is close to the viscosity of the clay paste only found to be 28.5 Pa∙s, thus good for shaping by the extrusion technique. The ceramic paste showed a pseudo-plastic behavior. The tubular porous support was sintered at 950°C and the dimensions, such as outer and inner diameters and length of the tube were 4 cm, 2 cm, and 19 cm, respectively. The sintered membrane possesses a porosity of 43.5%, water permeability of 244.9 L/h∙m2 bar, an average pore size of 2.4 μm and mechanical strength of 9.2 MPa with very good corrosion resistance in acidic and basic conditions. The membrane was subjected to microfiltration of synthetic clay suspension at various combinations of applied pressures (0.5 - 2 bar) with a feed concentration of 100 NTU. An increase in the applied pressure leads to an increase in the flow rate and retention rate. The flow rate decreases steadily with time. The highest retention was obtained at 2 bar with permeability of 184.69 L/h∙m2 bar and a retention of 96% decreasing the turbidity to about 3.5 NTU which is below the acceptable value of 5 NTU.展开更多
文摘Restructuring of power market not only introduces competition but also brings complexity which increases overloading of Transmission Lines(TL).To obviate this complexity,this paper aims to mitigate the overloading and estimate the optimal location of Static Synchronous Compensator(STATCOM) by reducing congestion for a deregulated power system.The proposed method is based on the use of Locational Marginal Price(LMP) difference technique and congestion cost.LMPs are obtained as a by-product of Optimal Power Flow(OPF),whereas Congestion Cost(CC) is a function of difference in LMP and power flows.The effiectiveness of this approach is demonstrated by reducing the CC and solution space which can identify the TLs more suitable for placement of STATCOM.Importantly,total real power loss,reactive power loss and total CC are the three main objective functions in this optimization process.The process is implemented by developing an IEEE-69 bus test system which verifies and validates the effectiveness of proposed optimization technique.Additionally,a comparative analysis is enumerated by implementing two optimization techniques:Flower Pollination Algorithm(FPA) and Particle Swarm Optimization(PSO).The comparative analysis is sufficient to demonstrate the superiority of FPA technique over PSO technique in estimating an optimal placement of a STATCOM.The results from the load-flow analysis illustrate the reduction in CC,total real and reactive power loss using FPA technique compared to PSO technique.Overall,satisfactory results are obtained without using complex calculations which verify the effectiveness of optimization techniques.
文摘Hybrid renewable energy systems(HRES)offer cost-effectiveness,low-emission power solutions,and reduced dependence on fossil fuels.However,the renewable energy allocation problem remains challenging due to complex system interactions and multiple operational constraints.This study develops a novel Multi-Neighborhood Enhanced Harris Hawks Optimization(MNEHHO)algorithm to address the allocation of HRES components.The proposed approach integrates key technical parameters,including charge-discharge efficiency,storage device configurations,and renewable energy fraction.We formulate a comprehensive mathematical model that simultaneously minimizes levelized energy costs and pollutant emissions while maintaining system reliability.The MNEHHO algorithm employs multiple neighborhood structures to enhance solution diversity and exploration capabilities.The model’s effectiveness is validated through case studies across four distinct institutional energy demand profiles.Results demonstrate that our approach successfully generates practically feasible HRES configurations while achieving significant reductions in costs and emissions compared to conventional methods.The enhanced search mechanisms of MNEHHO show superior performance in avoiding local optima and achieving consistent solutions.Experimental results demonstrate concrete improvements in solution quality(up to 46% improvement in objective value)and computational efficiency(average coefficient of variance of 24%-27%)across diverse institutional settings.This confirms the robustness and scalability of our method under various operational scenarios,providing a reliable framework for solving renewable energy allocation problems.
基金funded by Huaian Hongeng Group Co.,Ltd.Relying on theproject“Researchon Key Technologies of Integrated Photovoltaic and Energy Storage Electric Vehicle Charging Stations”(Project Number:SGTYHT/23-JS-001).
文摘This paper presents a solution for energy storage system capacity configuration and renewable energy integration in smart grids using a multi-disciplinary optimization method.The solution involves a hybrid prediction framework based on an improved grey regression neural network(IGRNN),which combines grey prediction,an improved BP neural network,and multiple linear regression with a dynamic weight allocation mechanism to enhance prediction accuracy.Additionally,an improved cuckoo search(ICS)algorithm is designed to empower the neural network model,incorporating a gamma distribution disturbance factor and adaptive inertia weight to balance global exploration and local exploitation,achieving a 40%faster convergence rate.A multi-objective snake optimization algorithm is also developed to optimize economic cost,grid stability,and energy utilization efficiency using energy storage capacity as the decision variable.The experimental results,based on a 937-day load dataset from a chemical park in Jiangsu Province,show that the IGRNN model has better prediction accuracy than traditional models,with an RMSE of 11.1361,an MAE of 8.264,and an R^(2) of 96.90%.The optimized energy storage system stabilizes the daily load curve at 800 kW,reduces the peak-valley difference by 62%,and decreases grid regulation pressure by 58.3%.This research provides theoretical and practical support for energy storage planning in high renewable energy proportion grids.Future work will focus on integrating weather data and dynamic optimization strategies under policy constraints to improve system applicability in real-world scenarios.
文摘In recent years, particle swarm optimization (PSO) has received widespread attention in feature selection due to its simplicity and potential for global search. However, in traditional PSO, particles primarily update based on two extreme values: personal best and global best, which limits the diversity of information. Ideally, particles should learn from multiple advantageous particles to enhance interactivity and optimization efficiency. Accordingly, this paper proposes a PSO that simulates the evolutionary dynamics of species survival in mountain peak ecology (PEPSO) for feature selection. Based on the pyramid topology, the algorithm simulates the features of mountain peak ecology in nature and the competitive-cooperative strategies among species. According to the principles of the algorithm, the population is first adaptively divided into many subgroups based on the fitness level of particles. Then, particles within each subgroup are divided into three different types based on their evolutionary levels, employing different adaptive inertia weight rules and dynamic learning mechanisms to define distinct learning modes. Consequently, all particles play their respective roles in promoting the global optimization performance of the algorithm, similar to different species in the ecological pattern of mountain peaks. Experimental validation of the PEPSO performance was conducted on 18 public datasets. The experimental results demonstrate that the PEPSO outperforms other PSO variant-based feature selection methods and mainstream feature selection methods based on intelligent optimization algorithms in terms of overall performance in global search capability, classification accuracy, and reduction of feature space dimensions. Wilcoxon signed-rank test also confirms the excellent performance of the PEPSO.
基金supported by the National Natural Science Foundation of China(62263014)the Yunnan Provincial Basic Research Project(202301AT070443,202401AT070344).
文摘Accurate identification of unknown internal parameters in photovoltaic(PV)cells is crucial and significantly affects the subsequent system-performance analysis and control.However,noise,insufficient data acquisition,and loss of recorded data can deteriorate the extraction accuracy of unknown parameters.Hence,this study proposes an intelligent parameter-identification strategy that integrates artificial ecosystem optimization(AEO)and a Bayesian neural network(BNN)for PV cell parameter extraction.A BNN is used for data preprocessing,including data denoising and prediction.Furthermore,the AEO algorithm is utilized to identify unknown parameters in the single-diode model(SDM),double-diode model(DDM),and three-diode model(TDM).Nine other metaheuristic algorithms(MhAs)are adopted for an unbiased and comprehensive validation.Simulation results show that BNN-based data preprocessing com-bined with effective MhAs significantly improve the parameter-extraction accuracy and stability compared with methods without data preprocessing.For instance,under denoised data,the accuracies of the SDM,DDM,and TDM increase by 99.69%,99.70%,and 99.69%,respectively,whereas their accuracy improvements increase by 66.71%,59.65%,and 70.36%,respectively.
基金jointly funded by the National Natural Science Foundation of China(Grant No.42161024)the Central Financial Forestry and Grassland Science and Technology Extension Demonstration Project(2025)(Grant No.Xin[2025]TG 09)。
文摘Accurate quantification of carbon and water fluxes dynamics in arid and semi-arid ecosystems is a critical scientific challenge for regional carbon neutrality assessments and sustainable water resource management.In this study,we developed a multi-flux global sensitivity discriminant index(D_(sen))by integrating the Biome-BGCMuSo model with eddy covariance flux observations.This index was combined with a Bayesian optimization algorithm to conduct parameter optimization.The results demonstrated that:(1)Sensitivity analysis identified 13 highly sensitive parameters affecting carbon and water fluxes.Among these,the canopy light extinction coefficient(k)and the fraction of leaf N in Rubisco(FLNR)exhibited significantly higher sensitivity to carbon fluxes(GPP,NEE,Reco;D_(sen)>10%)compared to water flux(ET).This highlights the strong dependence of carbon cycle simulations on vegetation physiological parameters.(2)The Bayesian optimization framework efficiently converged 30 parameter spaces within 50 iterations,markedly improving carbon fluxes simulation accuracy.The Kling-Gupta efficiency(KGE)values for Gross Primary Production(GPP),Net Ecosystem Exchange(NEE),and Total Respiration(Reco)increased by 44.94%,69.23%and 123%,respectively.The optimization prioritized highly sensitive parameters,underscoring the necessity of parameter sensitivity stratification.(3)The optimized model effectively reproduced carbon sink characteristics in mountain meadows during the growing season(cumulative NEE=-375 g C/m^(2)).It revealed synergistic carbon-water fluxes interactions governed by coupled photosynthesis-stomatal pathways and identified substrate supply limitations on heterotrophic respiration.This study proposes a novel multi-flux sensitivity index and an efficient optimization framework,elucidating the coupling mechanisms between vegetation physiological regulation(k,FLNR)and environmental stressors(VPD,SWD)in carbonwater cycles.The methodology offers a practical approach for arid ecosystem model optimization and provides theoretical insights for grassland management through canopy structure regulation and water-use efficiency enhancement.
基金National Natural Science Foundation of China,Grant/Award Number:U2243228The Belt and Road Special Foundation of the National Key Laboratory of Water Disaster Prevention,Grant/Award Number:2022nkms04+1 种基金MOE(Ministry of Education in China)Liberal Arts and Social Sciences Foundation,Grant/Award Number:23YJCZH332Natural Science Foundation of Anhui Province,Grant/Award Numbers:2208085US03,2308085US13。
文摘Exploring optimal operational schemes for synergistic development is crucial for sustainable management in river basins.This study introduces a multi-objective synergistic optimization framework aimed at analyzing the interplay among flood control,ecological integrity,and desilting objectives under varying watersediment conditions.The framework encompasses multi-objective reservoir optimal operation,scheme decision,and trade-off analysis among competing objectives.To address the optimization model,an elite mutation-based multiobjective particle swarm optimization(MOPSO)algorithm that integrates genetic algorithms(GA)is developed.The coupling coordination degree is employed for optimal scheme decision-making,allowing for the adjustment of weight ratios to investigate the trade-offs between objectives.This research focuses on the Sanmenxia and Xiaolangdi cascade reservoirs in the Yellow River,utilizing three representative hydrological years:1967,1969,and 2002.The findings reveal that:(1)the proposed model effectively generates Pareto fronts for multi-objective operations,facilitating the recommendation of optimal schemes based on coupling coordination degrees;(2)as water-sediment conditions shift from flooding to drought,competition intensifies between the flood control and desilting objectives.While flood control and ecological objectives compete during flood and dry years,they demonstrate synergies in normal years(r=0.22);conversely,ecological and desilting objectives are consistently competitive across all three typical years,with the strongest competition observed in the normal year(r=-0.95);(3)the advantages conferred to ecological objectives increase as water-sediment conditions shift from flooding to drought.However,the promotion of the desilting objective requires more complex trade-offs.This study provides a model and methodological approach for the multi-objective optimization of flood control,sediment management,and ecological considerations in reservoir clusters.Moreover,the methodologies presented herein can be extended to other water resource systems for multi-objective optimization and decision-making.
基金Supported by the National Natural Science Foundation of China(12071133)Natural Science Foundation of Henan Province(252300421993)Key Scientific Research Project of Higher Education Institutions in Henan Province(25B110005)。
文摘In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.
基金supported by the Science and Technology Project of Shaanxi Province Water Conservancy,China(2025slkj-10)the Natural Science Basic Research Program of Shaanxi Province,China(S2025-JC-QN-2416).
文摘The Wuding River Basin,situated in the Loess Plateau of northern China,is an ecologically fragile region facing severe soil erosion and imbalanced ecosystem service(ES)functions.However,the mechanisms driving the spatiotemporal evolution of ES functions,as well as the trade-offs and synergies among these functions,remain poorly understood,constraining effective watershed-scale management.To address this challenge,this study quantified four ES functions,i.e.,water yield(WY),carbon storage(CS),habitat quality(HQ),and soil conservation(SC)in the Wuding River Basin from 1990 to 2020 using the Integrated Valuation of Ecosystem Services and Tradeoff(InVEST)model,and proposed an innovative integration of InVEST with a Bayesian Belief Network(BBN)to nonlinearly identify trade-off and synergy relationships among ES functions through probabilistic inference.A trade-off and synergy index(TSI)was developed to assess the spatial interaction intensity among ES functions,while sensitivity and scenario analyses were employed to determine key driving factors,followed by spatial optimization to delineate functional zones.Results revealed distinct spatiotemporal variations:WY increased from 98.69 to 120.52 mm;SC rose to an average of 3.05×10^(4) t/hm^(2);CS remained relatively stable(about 15.50 t/km^(2));and HQ averaged 0.51 with localized declines.The BBN achieved a high accuracy of 81.9%and effectively identified strong synergies between WY and SC,as well as between CS and HQ,while clear trade-offs were observed between WY and SC versus CS and HQ.Sensitivity analysis indicated precipitation(variance reduction of 9.4%),land use(9.8%),and vegetation cover(9.1%)as key driving factors.Spatial optimization further showed that core supply and ecological regulation zones are concentrated in the central-southern and southeastern basin,while ecological strengthening and optimization core zones dominate the central-northern and southeastern margins,highlighting strong spatial heterogeneity.Overall,this study advances ES research by combining process-based quantification with probabilistic modeling,offering a robust framework for studying nonlinear interactions,driving mechanisms,and optimization strategies,and providing a transferable paradigm for watershed-scale ES management and ecological planning in arid and semi-arid areas.
基金Project(50974041)supported by the National Natural Science Foundation of ChinaProject(NCET-11-0073)supported by Program for New Century Excellent Talents in University of Ministry of Education of China+1 种基金Project(201102065)supported by the Natural Science Foundation of Liaoning Province,ChinaProject(2012921075)supported by the Ten Million Talent Project of Liaoning Province,China
文摘The ecological costs of open pit metal mining are quantified, which include lost value of direct eco-services, lost value of indirect eco-services, prevention and restoration costs, and cost of carbon emission from energy consumption. These ecological costs are incorporated in an iterative ultimate pit optimization algorithm. A case study is presented to demonstrate the influence of ecological costs on pit design outcome. The results show that it is possible to internalize ecological costs in mine designs. The pit optimization outcome shifts considerably to the conservative side and the profitability decreases substantially when ecological costs are accounted for.
文摘The manufacturing cost is a significant factor that must be considered in the structural design of a composite wing. A multi-objective optimization method for the tradeoff between manufacturing cost and weight of composite wing structure is de- veloped by integrating the manufacturing cost model into the traditional wing structural optimization. A two-level optimization method is proposed to carry out the tradeoff between manufacturing cost and weight, in which the design variables include both structural layout and dimensions and a cost model is incorporated into structural optimization. The manufacturing cost model for a composite wing and the detail procedure for solving this tradeoff problem are presented. The application of the method to the composite wing structural design of an unmanned aerial vehicle is illustrated to verify the method. The application indicates that the method is able to find the Pareto optimal set of minimum structural weight and manufacturing cost. Based on the Pareto optimal set, one can conduct the tradeoff between manufacturing cost and weight of wing structures.
文摘A particle swarm optimization (PSO) algorithm improved by immunity algorithm (IA) was presented. Memory and self-regulation mechanisms of IA were used to avoid PSO plunging into local optima. Vaccination and immune selection mechanisms were used to prevent the undulate phenomenon during the evolutionary process. The algorithm was introduced through an application in the direct maintenance cost (DMC) estimation of aircraft components. Experiments results show that the algorithm can compute simply and run quickly. It resolves the combinatorial optimization problem of component DMC estimation with simple and available parameters. And it has higher accuracy than individual methods, such as PLS, BP and v-SVM, and also has better performance than other combined methods, such as basic PSO and BP neural network.
基金Supported by the General Project of National Natural Science Foundation of China,Research of the Ratio Optimization between Chlorogenic Acid and Geniposide for Non-alcoholic Fatty Liver Disease,the Mechanism of Action for Epithelial-Mesenchymal Transition(No.81274155),Mechanism of Chlorogenic Acid and Geniposide for NASH by Regulating Kupffer Cells Polarization Based on Gut-liver Axis(No.81673660),the Youth Project of National Natural Science Foundation of China,Research on the mechanism of compound prescription of Chinese traditional medicine regulating endocannabinoid system in non-alcoholic steatohepatitis(No.81503529),Mechanism of treatment of nonalcoholic fatty liver disease by"HJJB"compound of Chinese traditional medicine based on insulin transduction(No.81503404)the Pilot Project of Science and Technology of Fujian Province,Study of Compound Prescription of Chinese Traditional Medicine on Fibrosis Based on Endocannabinoid System(No.2016D012)+1 种基金the TCM Project of Fujian Health Department,Clinic Research of Chinese Traditional Medicine for Nonalcoholic Fatty Liver(No.wzpw201308)the General Project of Xiamen Science and Technology Program Grant,Research of Chinese Traditional Medicine with IFNαTreatment on CHB(No.3502Z20134020)
文摘OBJECTIVE: To investigate the optimal dosage ratio of chlorogenic acid and gardenia glycosides in treating the rates with fatty liver disease induced by high-fat feed.METHODS: A rat model of non-alcoholic fatty liver disease(NAFLD) was established by using a high-fat diet. According to mathematical model "uniform design", varying doses of chlorogenic acid and gardenia glycosides have been combined to form 6 medications for the treatment of NAFLD.Samples were then taken to observe pathological changes of the liver tissue(HE staining); changes in the fat metabolism pathway e.g. triglyceride(TG)and free fatty acid(FFA) content; alterations in liver function, i.e. serum alanine aminotransferase(ALT)and aspartate aminotransferase(AST) activity; and differences in Malondialdehyde(MDA) and superoxide dismutase(SOD) content in the liver tissue. Multiple regression analysis was conducted to test the optimal dosage ratio of chlorogenic acid and gardenia glycosides.RESULTS: Fatty degeneration and vacuole-like changes of different degrees occurred in hepatic cells of the model group. Markers for fat metabolism, serum ALT and AST activities, and expression of MDA in liver tissue significantly increased, while SOD decreased. Combination of 90 mg chlorogenic acid and 90 mg Gardenia glycosides was the optimal dosage ratio of chlorogenic acid and gardenia glycosides in the treatment of rats with fatty liver induced by high-fat diet.CONCLUSION: Chlorogenic acid of 90 mg plus gardenia glycosides of 90 mg was the best combination in the treatment of fatty liver disease in rats induced by high-fat feed.
文摘Prestressed wire winded framework （PWWF） is an advanced structure and the most expensive part in the large-scale equip- ment. The traditional design of PWWF is complicated, highly iterative and cost uncontrolable, because PWWF is a variable stiffness multi-agent structure, with non-linear loading and deformation coordination. In this paper, cost optimization method of large-scale PWWF by multiple-island genetic algorithm （MIGA） is presented. Optimization design flow and optimization model are proposed based on variable-tension wire winding theory. An example of the PWWF cost optimization of isostatic equipment with axial load 6 000 kN is given. The optimization cost is reduced by 21.6% compared with traditional design. It has also been verified by the finite-element analysis and successfully applied to an actual PWWF design of isostatic press. The results show that this method is efficient and reliable. This method can also provide a guide for optimal design for ultra-large dimension muti-frame structure of 546 MN and 907 MN isostatic press equipment.
文摘In drilling operation, a large saving in time and money would be achieved by reducing the drilling time, since some of the costs are time-dependent. Drilling time could be minimized by raising the penetration rate. In the comparative optimization method, by using the records of the first drilled wells and comparing the criteria like penetration rate, cost per foot and specific energy, the drilling parameters of the next wells being drilled can be optimized in each depth interval. In the mathematical optimization technique, some numerical equations to model the penetration rate, bit wear rate and hydraulics would be used to minimize the drilling cost and time as much as possible and improve the results of the primary comparative optimization. In this research, as a case study the Iranian Khangiran gas field has been evaluated to optimize the drilling costs. A combination of the mentioned optimization techniques resulted in an optimal well which reduced the drilling time and cost considerably in comparison with the wells already drilled.
基金supported by the National Natural Science Foundation of China(7120116671201170)
文摘This paper considers a project scheduling problem with the objective of minimizing resource availability costs appealed to finish al activities before the deadline. There are finish-start type precedence relations among the activities which require some kinds of renewable resources. We predigest the process of sol-ving the resource availability cost problem （RACP） by using start time of each activity to code the schedule. Then, a novel heuris-tic algorithm is proposed to make the process of looking for the best solution efficiently. And then pseudo particle swarm optimiza-tion （PPSO） combined with PSO and path relinking procedure is presented to solve the RACP. Final y, comparative computational experiments are designed and the computational results show that the proposed method is very effective to solve RACP.
基金Project(51074051)supported by the National Natural Science Foundation of ChinaProject(N110307001)supported by the Fundamental Research Funds for the Central Universities,China
文摘In terms of tandem cold mill productivity and product quality, a multi-objective optimization model of rolling schedule based on cost fimction was proposed to determine the stand reductions, inter-stand tensions and rolling speeds for a specified product. The proposed schedule optimization model consists of several single cost fi.mctions, which take rolling force, motor power, inter-stand tension and stand reduction into consideration. The cost function, which can evaluate how far the rolling parameters are from the ideal values, was minimized using the Nelder-Mead simplex method. The proposed rolling schedule optimization method has been applied successfully to the 5-stand tandem cold mill in Tangsteel, and the results from a case study show that the proposed method is superior to those based on empirical formulae.
文摘The objective of this study is to develop a model that determines the optimal points for investment in green management by defining a mathematical relationship between carbon trading profits and investments in green management using a company’s supply chain information. To formulate this model, we first define and analyze a green supply chain in a multi-dimensional and quantitative manner. The green investment alternatives considering in our model are as follows: 1) purchasing eco-friendly raw materials that cost more than conventional raw materials but whose use in production results in lower CO2 emissions;2) replacing current facilities with new eco-friendly facilities that have the capability to reduce CO2 emissions;and 3) changing modes of transport from less eco-friendly to more eco-friendly modes. We propose a green investment cost optimization (GICO) model that enables us to determine the optimal investment points. The proposed GICO model can support decision-making processes in green supply chain management environments.
基金Supported by the National Natural Science Foundation of China(51774307).
文摘Series of experiments were performed to simulate the invasion of formation sand into and the plugging process of gravel-pack at different viscosities and flowing rates of fluid.Two types of formation sands with the medium size of 0.10 mm and 0.16 mm and the quartz sand and ceramsite of 0.6-1.2 mm were used in the experiments.A new viscosity-velocity index(the product of fluid viscosity and velocity)was put forward to characterize the influencing mechanism and law of physical property and flow condition of formation fluid on gravel-pack plugging,and a new method to optimize the production rate of wells controlling sand production with gravel-packing was proposed.The results show that the permeability of formation sand invaded zone and final permeability of plugged gravel-pack have negative correlations with viscosity and flow velocity of fluid,the higher the flow velocity and viscosity,the lower the permeability of formation sand invaded zone and final permeability of plugged gravel-pack will be.The flow velocity and viscosity of fluid are key factors affecting plugging degree of the gravel zone.The viscosity-velocity index(v-v index)can reflect the flow characteristics of fluid very well and make it easier to analyze the plugging mechanism of gravel zone.For different combinations of fluid viscosity and flow velocity,if the v-v index is the same or close,their impact on the final gravel permeability would be the same or close.With the increase of the v-v index,the permeability of plugged gravel zone decreases first,then the reduction rate slows down till the permeability stabilizes.By optimizing production and increasing production step by step,the optimal working scheme for sand-control well can reduce the damage to gravel-pack zone permeability caused by sand-carrying fluid effectively,and increase well productivity and extend the sand control life.
文摘The objective of this work was to determine the optimum size and amount of raw materials which influence the viscosity of ceramic paste using the experimental design for the production of tubular support by the extrusion technique and its application in microfiltration. The Box Behnken design was used to optimize the viscosity of the ceramic paste. ANOVA was used to model the system represented by independent parameters and dependent output response and to optimize the system by estimating the statistical parameters. A three-factor and three-level design was used generating thus 15 experiments. The independent factors were the amount of porogen, size of porogen and amount of binder and dependent factor the viscosity of the ceramic paste. The minimum (−1), intermediate (0) and maximum (+1) level of the amount of porogen, size of porogen and amount of binder used were 20 g, 30 g and 40 g, 50 μm, 100 μm and 150 μm, and 2 g, 3.5 g and 5 g respectively. The statistical analyses showed that the values of the answers would adapt to a second degree polynomial model. The R-square value obtained was greater than 95%, the Biais factor was equal to the unit and the Absolute Average Deviation (AAD) equal to the zero thus validating the model. The optimal size of raw material was found to be 100 μm for an amount of clay of 66 g, amount of porogen of 30 g and amount of binder of 4 g. The optimum viscosity of the ceramic paste was found to be 26.7 Pa∙s which is close to the viscosity of the clay paste only found to be 28.5 Pa∙s, thus good for shaping by the extrusion technique. The ceramic paste showed a pseudo-plastic behavior. The tubular porous support was sintered at 950°C and the dimensions, such as outer and inner diameters and length of the tube were 4 cm, 2 cm, and 19 cm, respectively. The sintered membrane possesses a porosity of 43.5%, water permeability of 244.9 L/h∙m2 bar, an average pore size of 2.4 μm and mechanical strength of 9.2 MPa with very good corrosion resistance in acidic and basic conditions. The membrane was subjected to microfiltration of synthetic clay suspension at various combinations of applied pressures (0.5 - 2 bar) with a feed concentration of 100 NTU. An increase in the applied pressure leads to an increase in the flow rate and retention rate. The flow rate decreases steadily with time. The highest retention was obtained at 2 bar with permeability of 184.69 L/h∙m2 bar and a retention of 96% decreasing the turbidity to about 3.5 NTU which is below the acceptable value of 5 NTU.
