Optimal parameterization of specified segment on the algebraic curves is a hot issue in CAGD and CG. Take the optimal approximation of arc-length parameterization as the criterion of optimal parameterization, and the ...Optimal parameterization of specified segment on the algebraic curves is a hot issue in CAGD and CG. Take the optimal approximation of arc-length parameterization as the criterion of optimal parameterization, and the optimal or close to optimal rational parameterization formula of any specified segment on the conic curves is obtained. The new method proposed in this paper has ad- vantage in quantity of calculation and has strong self-adaptability. Finally, a experimental comparison of the results obtained by this method and by the traditional parametric algorithm is conducted.展开更多
In this paper, we rewrote the equation of algebraic curve segmentswith the geometric informationonboth ends. The optimal or nearly optimal rationalparametric equation is determinedbythe principle that parametricspeeds...In this paper, we rewrote the equation of algebraic curve segmentswith the geometric informationonboth ends. The optimal or nearly optimal rationalparametric equation is determinedbythe principle that parametricspeedsat both endsareequal. Comparing withotherliteratures, the methodofthis paper has advantage in efficiency andiseasy to realize. The equation of optimal rational parameterization can be obtained directly by the information of both ends. Large numbers ofexperimental data show that our method hasbeen given withmore self-adaptability and accuracy than that ofotherliteratures, and if the parametricspeedat any end reaches its maximum or minimum value, the parameterization is optimal; otherwise itis close tooptimal rational parameterization.展开更多
In the typhoon adaptive observation based on conditional nonlinear optimal perturbation (CNOP), the ‘on-off’ switch caused by moist physical parameterization in prediction models prevents the conventional adjoint me...In the typhoon adaptive observation based on conditional nonlinear optimal perturbation (CNOP), the ‘on-off’ switch caused by moist physical parameterization in prediction models prevents the conventional adjoint method from providing correct gradient during the optimization process. To address this problem, the capture of CNOP, when the "on-off" switches are included in models, is treated as non-smooth optimization in this study, and the genetic algorithm (GA) is introduced. After detailed algorithm procedures are formulated using an idealized model with parameterization "on-off" switches in the forcing term, the impacts of "on-off" switches on the capture of CNOP are analyzed, and three numerical experiments are conducted to check the effectiveness of GA in capturing CNOP and to analyze the impacts of different initial populations on the optimization result. The result shows that GA is competent for the capture of CNOP in the context of the idealized model with parameterization ‘on-off’ switches in this study. Finally, the advantages and disadvantages of GA in capturing CNOP are analyzed in detail.展开更多
The adjustable parameters in the popular conductor-like screening model for real solvents(COSMO-RS)within the Amsterdam density functional(ADF)framework have been re-optimized to fit for the systems containing ionic l...The adjustable parameters in the popular conductor-like screening model for real solvents(COSMO-RS)within the Amsterdam density functional(ADF)framework have been re-optimized to fit for the systems containing ionic liquids(ILs).To get the optimal values of misfit energy constant a^0,hydrogen bond coefficient c_(hb)and effective contact surface area of a segment a_(eff),2283 activity coefficient data points at infinite dilution and 1433 CO_2 solubility data points exhaustively collected from references were used as training set.The average relative deviations(ARDs)of activity coefficients at infinite dilution and CO_2 solubility between experimental data and predicted values are 32.22%and17.61%,respectively,both of which are significantly lower than the original COSMO-RS versions.Predictions for other activity coefficients of solutes in ILs,solubility data of CO_2 in pure ILs and the binary mixtures of ILs at either high or low temperatures,and vapor–liquid equilibrium(VLE)for binary systems involving ILs have also been performed to demonstrate the validity of the parameterization of COSMO-RS model for ILs.The results showed that the predicted results by COSMO-RS model with the new optimized parameters are in much better agreement with experimental data than those by the original versions over a wide temperature and pressure range.The COSMO-RS model for ILs presented in this work improves the prediction accuracy of thermodynamic properties for the systems containing ILs,which is always highly desirable for general chemical engineers.展开更多
In order to assess the effects of calibration data series length on the performance and optimal parameter values of a hydrological model in ungauged or data-limited catchments （data are non-continuous and fragmental ...In order to assess the effects of calibration data series length on the performance and optimal parameter values of a hydrological model in ungauged or data-limited catchments （data are non-continuous and fragmental in some catchments）, we used non-continuous calibration periods for more independent streamflow data for SIMHYD （simple hydrology） model calibration. Nash-Sutcliffe efficiency and percentage water balance error were used as performance measures. The particle swarm optimization （PSO） method was used to calibrate the rainfall-runoff models. Different lengths of data series ranging from one year to ten years, randomly sampled, were used to study the impact of calibration data series length. Fifty-five relatively unimpaired catchments located all over Australia with daily precipitation, potential evapotranspiration, and streamflow data were tested to obtain more general conclusions. The results show that longer calibration data series do not necessarily result in better model performance. In general, eight years of data are sufficient to obtain steady estimates of model performance and parameters for the SIMHYD model. It is also shown that most humid catchments require fewer calibration data to obtain a good performance and stable parameter values. The model performs better in humid and semi-humid catchments than in arid catchments. Our results may have useful and interesting implications for the efficiency of using limited observation data for hydrological model calibration in different climates.展开更多
An extension of the conditional nonlinear optimal parameter perturbation （CNOP-P） method is applied to the parameter optimization of the Common Land Model （CoLM） for the North China Plain with the differential evo...An extension of the conditional nonlinear optimal parameter perturbation （CNOP-P） method is applied to the parameter optimization of the Common Land Model （CoLM） for the North China Plain with the differential evolution （DE） method. Using National Meteorological Center （NMC） Reanalysis 6-hourly surface flux data and National Center for Environmental Prediction/Department of Energy （NCEP/DOE） Atmospheric Model Intercomparison Project II （AMIP-II） 6-hourly Reanalysis Gaussian Grid data, two experiments （I and II） were designed to investigate the impact of the percentages of sand and clay in the shallow soil in CoLM on its ability to simulate shallow soil moisture. A third experiment （III） was designed to study the shallow soil moisture and latent heat flux simultaneously. In all the three experiments, after the optimization stage, the percentages of sand and clay of the shallow soil were used to predict the shallow soil moisture in the following month. The results show that the optimal parameters can enable CoLM to better simulate shallow soil moisture, with the simulation results of CoLM after the double-parameter optimal ex- periment being better than the single-parameter optimal experiment in the optimization slot. Purthermore, the optimal parameters were able to significantly improve the prediction results of CoLM at the prediction stage. In addition, whether or not the atmospheric forcing and observational data are accurate can seriously affect the results of optimization, and the more accurate the data are, the more significant the results of optimization may be.展开更多
Among the available clustering algorithms in data mining, the CLOPE algorithm attracts much more attention with its high speed and good performance. However, the proper choice of some parameters in the CLOPE algorithm...Among the available clustering algorithms in data mining, the CLOPE algorithm attracts much more attention with its high speed and good performance. However, the proper choice of some parameters in the CLOPE algorithm directly affects the validity of the clustering results, which is still an open issue. For this purpose, this paper proposes a fuzzy CLOPE algorithm, and presents a method for the optimal parameter choice by defining a modified partition fuzzy degree as a clustering validity function. The experimental results with real data set illustrate the effectiveness of the proposed fuzzy CLOPE algorithm and optimal parameter choice method based on the modified partition fuzzy degree.展开更多
In recent years,progressive developments have been observed in recent technologies and the production cost has been continuously decreasing.In such scenario,Internet of Things(IoT)network which is comprised of a set o...In recent years,progressive developments have been observed in recent technologies and the production cost has been continuously decreasing.In such scenario,Internet of Things(IoT)network which is comprised of a set of Unmanned Aerial Vehicles(UAV),has received more attention from civilian tomilitary applications.But network security poses a serious challenge to UAV networks whereas the intrusion detection system(IDS)is found to be an effective process to secure the UAV networks.Classical IDSs are not adequate to handle the latest computer networks that possess maximumbandwidth and data traffic.In order to improve the detection performance and reduce the false alarms generated by IDS,several researchers have employed Machine Learning(ML)and Deep Learning(DL)algorithms to address the intrusion detection problem.In this view,the current research article presents a deep reinforcement learning technique,optimized by BlackWidow Optimization(DRL-BWO)algorithm,for UAV networks.In addition,DRL involves an improved reinforcement learning-based Deep Belief Network(DBN)for intrusion detection.For parameter optimization of DRL technique,BWO algorithm is applied.It helps in improving the intrusion detection performance of UAV networks.An extensive set of experimental analysis was performed to highlight the supremacy of the proposed model.From the simulation values,it is evident that the proposed method is appropriate as it attained high precision,recall,F-measure,and accuracy values such as 0.985,0.993,0.988,and 0.989 respectively.展开更多
How to accelerate the convergence speed and avoid computing the inversion of a Jacobian matrix is important in the solution of nonlinear algebraic equations(NAEs).This paper develops an approach with a splitting-linea...How to accelerate the convergence speed and avoid computing the inversion of a Jacobian matrix is important in the solution of nonlinear algebraic equations(NAEs).This paper develops an approach with a splitting-linearizing technique based on the nonlinear term to reduce the effect of the nonlinear terms.We decompose the nonlinear terms in the NAEs through a splitting parameter and then linearize the NAEs around the values at the previous step to a linear system.Through the maximal orthogonal projection concept,to minimize a merit function within a selected interval of splitting parameters,the optimal parameters can be quickly determined.In each step,a linear system is solved by the Gaussian elimination method,and the whole iteration procedure is convergent very fast.Several numerical tests show the high performance of the optimal split-linearization iterative method(OSLIM).展开更多
Spectrum sensing is an important part of cognitive radio systems to find spectrum hole for transmission which enables cognitive radio systems coexist with the authorized radio systems without harmful interference.In t...Spectrum sensing is an important part of cognitive radio systems to find spectrum hole for transmission which enables cognitive radio systems coexist with the authorized radio systems without harmful interference.In this paper,an improved cyclostationary feature detection method is proposed to reduce computational complexity without loss of good performance based on the optimal parameter selection strategy for choosing detection parameters of cyclic frequency and lag.Taking binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK) signals as examples,the theoretical analyses are presented for choosing the optimal parameters.Simulation results are given to certify the correctness of the proposed parameter selection strategy and show the performance of the proposed method.展开更多
The aim of the study is to determine the optimal structural parameters for a plastic centrifugal pump inducer within the framework of an orthogonal experimental method.For this purpose,a numerical study of the related...The aim of the study is to determine the optimal structural parameters for a plastic centrifugal pump inducer within the framework of an orthogonal experimental method.For this purpose,a numerical study of the related flow field is performed using CFX.The shaft power and the head of the pump are taken as the evaluation indicators.Accordingly,the examined variables are the thickness(S),the blade cascade degree(t),the blade rim angle(β1),the blade hub angle(β2)and the hub length(L).The impact of each structural parameter on each evaluation index is examined and special attention is paid to the following combinations:S2 mm,t 2,β1235°,β2360°and L 140 mm(corresponding to a maximum head of 98.15 m);S 5 mm,t 1.6,β1252°,β2350°and L 140 mm(corresponding to a minimum shaft power of 63.06 KW).Moreover,using least squares and fish swarm algorithms,the pump shaft power and head are further optimized,yielding the following optimal combination:S 5 mm,t 1.9,β1252°,β2360°and L 145 mm(corresponding to the maximum head of 91.90 m,and a minimum shaft power of 64.83 KW).展开更多
A new mothod was presented to find the optimal location and parameter setting of Thyristor Controlled Series Compensator (TCSC) to maxmize the transfer capability.Firstly the sensitivity of the transfer capability wit...A new mothod was presented to find the optimal location and parameter setting of Thyristor Controlled Series Compensator (TCSC) to maxmize the transfer capability.Firstly the sensitivity of the transfer capability with respect was described to the line's reactance was described to find the more sensitive lines for installing TCSC,however,the line which has the most sesitivity value is always not the best line for installing TCSC.For solving this problem,the more sensitive m lines were selected as the alternative line group of installing TCSC,and then modified particle swarm optimization (MPSO) was used to find out the optimal location and the optimal parameter settings of TCSC.Particle swarm optimization (PSO) algorithm can results premature convergence.For solving this problem,population entropy and cellular automata were introduced to it.Simulation results of IEEE 30-bus system proved the effectiveness of the method and its application values.展开更多
By using the weight function method,the matching parameters of the half discrete Hilbert type multiple integral inequality with a non-homogeneous kernel K(n,||x||ρ,m)=G(nλ1||x||ρmλ,2)are discussed,some equivalent ...By using the weight function method,the matching parameters of the half discrete Hilbert type multiple integral inequality with a non-homogeneous kernel K(n,||x||ρ,m)=G(nλ1||x||ρmλ,2)are discussed,some equivalent conditions of the optimal matching parameter are established,and the expression of the optimal constant factor is obtained.Finally,their applications in operator theory are considered.展开更多
Medical image classification becomes a vital part of the design of computer aided diagnosis(CAD)models.The conventional CAD models are majorly dependent upon the shapes,colors,and/or textures that are problem oriented...Medical image classification becomes a vital part of the design of computer aided diagnosis(CAD)models.The conventional CAD models are majorly dependent upon the shapes,colors,and/or textures that are problem oriented and exhibited complementary in medical images.The recently developed deep learning(DL)approaches pave an efficient method of constructing dedicated models for classification problems.But the maximum resolution of medical images and small datasets,DL models are facing the issues of increased computation cost.In this aspect,this paper presents a deep convolutional neural network with hierarchical spiking neural network(DCNN-HSNN)for medical image classification.The proposed DCNN-HSNN technique aims to detect and classify the existence of diseases using medical images.In addition,region growing segmentation technique is involved to determine the infected regions in the medical image.Moreover,NADAM optimizer with DCNN based Capsule Network(CapsNet)approach is used for feature extraction and derived a collection of feature vectors.Furthermore,the shark smell optimization algorithm(SSA)based HSNN approach is utilized for classification process.In order to validate the better performance of the DCNN-HSNN technique,a wide range of simulations take place against HIS2828 and ISIC2017 datasets.The experimental results highlighted the effectiveness of the DCNN-HSNN technique over the recent techniques interms of different measures.Please type your abstract here.展开更多
The primary factor contributing to frequency instability in microgrids is the inherent intermittency of renewable energy sources.This paper introduces novel dual-backup controllers utilizing advanced fractional order ...The primary factor contributing to frequency instability in microgrids is the inherent intermittency of renewable energy sources.This paper introduces novel dual-backup controllers utilizing advanced fractional order proportional integral derivative(FOPID)controllers to enhance frequency and tie-line power stability in microgrids amid increasing renewable energy integration.To improve load frequency control,the proposed controllers are applied to a two-area interconnectedmicrogrid system incorporating diverse energy sources,such as wind turbines,photovoltaic cells,diesel generators,and various storage technologies.A novelmeta-heuristic algorithm is adopted to select the optimal parameters of the proposed controllers.The efficacy of the advanced FOPID controllers is demonstrated through comparative analyses against traditional proportional integral derivative(PID)and FOPID controllers,showcasing superior performance inmanaging systemfluctuations.The optimization algorithm is also evaluated against other artificial intelligent methods for parameter optimization,affirming the proposed solution’s efficiency.The robustness of the intelligent controllers against system uncertainties is further validated under extensive power disturbances,proving their capability to maintain grid stability.The dual-controller configuration ensures redundancy,allowing them to operate as mutual backups,enhancing system reliability.This research underlines the importance of sophisticated control strategies for future-proofing microgrid operations against the backdrop of evolving energy landscapes.展开更多
Mathematical models for phenomena in the physical sciences are typically parameter-dependent, and the estimation of parameters that optimally model the trends suggested by experimental observation depends on how model...Mathematical models for phenomena in the physical sciences are typically parameter-dependent, and the estimation of parameters that optimally model the trends suggested by experimental observation depends on how model-observation discrepancies are quantified. Commonly used parameter estimation techniques based on least-squares minimization of the model-observation discrepancies assume that the discrepancies are quantified with the L<sup>2</sup>-norm applied to a discrepancy function. While techniques based on such an assumption work well for many applications, other applications are better suited for least-squared minimization approaches that are based on other norm or inner-product induced topologies. Motivated by an application in the material sciences, the new alternative least-squares approach is defined and an insightful analytical comparison with a baseline least-squares approach is provided.展开更多
The conventional honey production is dominated by fragmented,small-scale individual farming models.The traditional approach of honey-harvesting involving manual beehive frames extraction,beeswax layer excision and cen...The conventional honey production is dominated by fragmented,small-scale individual farming models.The traditional approach of honey-harvesting involving manual beehive frames extraction,beeswax layer excision and centrifugal honey separation,expose beekeepers to potential bee stings and frequently compromise honeycomb integrity.To address these limitations,we designed an automated honey-harvesting robot capable of autonomous frame extraction and beeswax removal.The robot mainly consists of a mobile mechanism equipped with image recognition for beehive localization,a magnetic adsorption-based beehive frame handling device(60.8 N maximum suction)coupled with a cross-slide mechanism for precise frame manipulation,and a thermal beeswax layer-melting apparatus,with optimal melting parameters(15 m/s airflow at 90℃ for 30 seconds)determined through rigorous thermal flow simulations utilizing FLUENT/Mechanical software.Field experiments demonstrated beehive frames handling success rate exceeding 85%,beeswax layer removal efficacy over 80% and damage of honeycombs below 30%.The experiment results validate the robot's operational reliability and its capacity to automate critical harvesting procedures.This study significantly reduces the labor intensity for beekeepers,effectively eliminates the risk of direct human-bee contact and improves the removal of beeswax layer,thereby catalyzing the modernization of the beekeeping industry.展开更多
Rocking the drillstring at the surface during slide drilling is a common method for reducing drag when drilling horizontal wells.However,the current methods for determining the parameters for rocking are insufficient,...Rocking the drillstring at the surface during slide drilling is a common method for reducing drag when drilling horizontal wells.However,the current methods for determining the parameters for rocking are insufficient,limiting the widespread use of this technology.In this study,the influence of rocking parameters on the friction-reduction effect was investigated using an axialetorsional dynamic model of the drillstring and an experimental apparatus for rocking-assisted slide drilling in a simulated horizontal well.The research shows that increasing the rocking speed is beneficial improving the friction-reduction effect,but there is a diminishing marginal effect.A method was proposed to optimize the rocking speed using the equivalent axial drag coefficienterocking speed curve.Under the influence of rocking,the downhole weight on bit(WOB)exhibits a sinusoidal-like variation,with the predominant frequency being twice the rocking frequency.The fluctuation amplitude of the WOB in the horizontal section has a linear relationship with the rocking-affected depth.Based on this,a method was proposed to estimate the rockingaffected depth using the fluctuation amplitude of the standpipe pressure difference.Application of this method in the drilling field has improved the rate of penetration and toolface stability,demonstrating the reliability and effectiveness of the methods proposed in this paper.展开更多
Web pillars enduring complex coupled loads are critical for stability in high-wall mining.This study develops a dynamic failure criterion for web pillars under non-uniform loading using catastrophe theory.Through the ...Web pillars enduring complex coupled loads are critical for stability in high-wall mining.This study develops a dynamic failure criterion for web pillars under non-uniform loading using catastrophe theory.Through the analysis of the web pillar-overburden system’s dynamic stress and deformation,a total potential energy function and dynamic failure criterion were established for web pillars.An optimizing method for web pillar parameters was developed in highwall mining.The dynamic criterion established was used to evaluate the dynamic failure and stability of web pillars under static and dynamic loading.Key findings reveal that vertical displacements exhibit exponential-trigonometric variation under static loads and multi-variable power-law behavior under dynamic blasting.Instability risks arise when the roof’s tensile strength-to-stress ratio drops below 1.Using catastrophe theory,the bifurcation setΔ<0 signals sudden instability.The criterion defines failure as when the unstable web pillar section length l1 exceeds the roof’s critical collapse distance l2.Case studies and simulations determine an optimal web pillar width of 4.6 m.This research enhances safety and resource recovery,providing a theoretical framework for advancing highwall mining technology.展开更多
This work proposes an optimization method for gas storage operation parameters under multi-factor coupled constraints to improve the peak-shaving capacity of gas storage reservoirs while ensuring operational safety.Pr...This work proposes an optimization method for gas storage operation parameters under multi-factor coupled constraints to improve the peak-shaving capacity of gas storage reservoirs while ensuring operational safety.Previous research primarily focused on integrating reservoir,wellbore,and surface facility constraints,often resulting in broad constraint ranges and slow model convergence.To solve this problem,the present study introduces additional constraints on maximum withdrawal rates by combining binomial deliverability equations with material balance equations for closed gas reservoirs,while considering extreme peak-shaving demands.This approach effectively narrows the constraint range.Subsequently,a collaborative optimization model with maximum gas production as the objective function is established,and the model employs a joint solution strategy combining genetic algorithms and numerical simulation techniques.Finally,this methodology was applied to optimize operational parameters for Gas Storage T.The results demonstrate:(1)The convergence of the model was achieved after 6 iterations,which significantly improved the convergence speed of the model;(2)The maximum working gas volume reached 11.605×10^(8) m^(3),which increased by 13.78%compared with the traditional optimization method;(3)This method greatly improves the operation safety and the ultimate peak load balancing capability.The research provides important technical support for the intelligent decision of injection and production parameters of gas storage and improving peak load balancing ability.展开更多
文摘Optimal parameterization of specified segment on the algebraic curves is a hot issue in CAGD and CG. Take the optimal approximation of arc-length parameterization as the criterion of optimal parameterization, and the optimal or close to optimal rational parameterization formula of any specified segment on the conic curves is obtained. The new method proposed in this paper has ad- vantage in quantity of calculation and has strong self-adaptability. Finally, a experimental comparison of the results obtained by this method and by the traditional parametric algorithm is conducted.
文摘In this paper, we rewrote the equation of algebraic curve segmentswith the geometric informationonboth ends. The optimal or nearly optimal rationalparametric equation is determinedbythe principle that parametricspeedsat both endsareequal. Comparing withotherliteratures, the methodofthis paper has advantage in efficiency andiseasy to realize. The equation of optimal rational parameterization can be obtained directly by the information of both ends. Large numbers ofexperimental data show that our method hasbeen given withmore self-adaptability and accuracy than that ofotherliteratures, and if the parametricspeedat any end reaches its maximum or minimum value, the parameterization is optimal; otherwise itis close tooptimal rational parameterization.
基金Application investigation of conditional nonlinear optimal perturbation in typhoon adaptive observation (40830955)
文摘In the typhoon adaptive observation based on conditional nonlinear optimal perturbation (CNOP), the ‘on-off’ switch caused by moist physical parameterization in prediction models prevents the conventional adjoint method from providing correct gradient during the optimization process. To address this problem, the capture of CNOP, when the "on-off" switches are included in models, is treated as non-smooth optimization in this study, and the genetic algorithm (GA) is introduced. After detailed algorithm procedures are formulated using an idealized model with parameterization "on-off" switches in the forcing term, the impacts of "on-off" switches on the capture of CNOP are analyzed, and three numerical experiments are conducted to check the effectiveness of GA in capturing CNOP and to analyze the impacts of different initial populations on the optimization result. The result shows that GA is competent for the capture of CNOP in the context of the idealized model with parameterization ‘on-off’ switches in this study. Finally, the advantages and disadvantages of GA in capturing CNOP are analyzed in detail.
基金financially supported by the National Natural Science Foundation of China under Grants (Nos. 21476009, 21406007 and U1462104)
文摘The adjustable parameters in the popular conductor-like screening model for real solvents(COSMO-RS)within the Amsterdam density functional(ADF)framework have been re-optimized to fit for the systems containing ionic liquids(ILs).To get the optimal values of misfit energy constant a^0,hydrogen bond coefficient c_(hb)and effective contact surface area of a segment a_(eff),2283 activity coefficient data points at infinite dilution and 1433 CO_2 solubility data points exhaustively collected from references were used as training set.The average relative deviations(ARDs)of activity coefficients at infinite dilution and CO_2 solubility between experimental data and predicted values are 32.22%and17.61%,respectively,both of which are significantly lower than the original COSMO-RS versions.Predictions for other activity coefficients of solutes in ILs,solubility data of CO_2 in pure ILs and the binary mixtures of ILs at either high or low temperatures,and vapor–liquid equilibrium(VLE)for binary systems involving ILs have also been performed to demonstrate the validity of the parameterization of COSMO-RS model for ILs.The results showed that the predicted results by COSMO-RS model with the new optimized parameters are in much better agreement with experimental data than those by the original versions over a wide temperature and pressure range.The COSMO-RS model for ILs presented in this work improves the prediction accuracy of thermodynamic properties for the systems containing ILs,which is always highly desirable for general chemical engineers.
基金supported by the National Basic Research Program of China (the 973 Program,Grant No.2010CB951102)the National Supporting Plan Program of China (Grants No.2007BAB28B01 and 2008BAB42B03)the National Natural Science Foundation of China (Grant No. 50709042),and the Regional Water Theme in the Water for a Healthy Country Flagship
文摘In order to assess the effects of calibration data series length on the performance and optimal parameter values of a hydrological model in ungauged or data-limited catchments （data are non-continuous and fragmental in some catchments）, we used non-continuous calibration periods for more independent streamflow data for SIMHYD （simple hydrology） model calibration. Nash-Sutcliffe efficiency and percentage water balance error were used as performance measures. The particle swarm optimization （PSO） method was used to calibrate the rainfall-runoff models. Different lengths of data series ranging from one year to ten years, randomly sampled, were used to study the impact of calibration data series length. Fifty-five relatively unimpaired catchments located all over Australia with daily precipitation, potential evapotranspiration, and streamflow data were tested to obtain more general conclusions. The results show that longer calibration data series do not necessarily result in better model performance. In general, eight years of data are sufficient to obtain steady estimates of model performance and parameters for the SIMHYD model. It is also shown that most humid catchments require fewer calibration data to obtain a good performance and stable parameter values. The model performs better in humid and semi-humid catchments than in arid catchments. Our results may have useful and interesting implications for the efficiency of using limited observation data for hydrological model calibration in different climates.
基金supported by the National Natural Science Foundations of China (Grant Nos. 40805020 and 10901047)the Natural Science Foundation of Henan Province (Grant No. 112300410054)
文摘An extension of the conditional nonlinear optimal parameter perturbation （CNOP-P） method is applied to the parameter optimization of the Common Land Model （CoLM） for the North China Plain with the differential evolution （DE） method. Using National Meteorological Center （NMC） Reanalysis 6-hourly surface flux data and National Center for Environmental Prediction/Department of Energy （NCEP/DOE） Atmospheric Model Intercomparison Project II （AMIP-II） 6-hourly Reanalysis Gaussian Grid data, two experiments （I and II） were designed to investigate the impact of the percentages of sand and clay in the shallow soil in CoLM on its ability to simulate shallow soil moisture. A third experiment （III） was designed to study the shallow soil moisture and latent heat flux simultaneously. In all the three experiments, after the optimization stage, the percentages of sand and clay of the shallow soil were used to predict the shallow soil moisture in the following month. The results show that the optimal parameters can enable CoLM to better simulate shallow soil moisture, with the simulation results of CoLM after the double-parameter optimal ex- periment being better than the single-parameter optimal experiment in the optimization slot. Purthermore, the optimal parameters were able to significantly improve the prediction results of CoLM at the prediction stage. In addition, whether or not the atmospheric forcing and observational data are accurate can seriously affect the results of optimization, and the more accurate the data are, the more significant the results of optimization may be.
基金Supported by the National Natural Science Foundation of China (No.60202004).
文摘Among the available clustering algorithms in data mining, the CLOPE algorithm attracts much more attention with its high speed and good performance. However, the proper choice of some parameters in the CLOPE algorithm directly affects the validity of the clustering results, which is still an open issue. For this purpose, this paper proposes a fuzzy CLOPE algorithm, and presents a method for the optimal parameter choice by defining a modified partition fuzzy degree as a clustering validity function. The experimental results with real data set illustrate the effectiveness of the proposed fuzzy CLOPE algorithm and optimal parameter choice method based on the modified partition fuzzy degree.
基金This work is also supported by the Faculty of Computer Science and Information Technology,University of Malaya under Postgraduate Research Grant(PG035-2016A).
文摘In recent years,progressive developments have been observed in recent technologies and the production cost has been continuously decreasing.In such scenario,Internet of Things(IoT)network which is comprised of a set of Unmanned Aerial Vehicles(UAV),has received more attention from civilian tomilitary applications.But network security poses a serious challenge to UAV networks whereas the intrusion detection system(IDS)is found to be an effective process to secure the UAV networks.Classical IDSs are not adequate to handle the latest computer networks that possess maximumbandwidth and data traffic.In order to improve the detection performance and reduce the false alarms generated by IDS,several researchers have employed Machine Learning(ML)and Deep Learning(DL)algorithms to address the intrusion detection problem.In this view,the current research article presents a deep reinforcement learning technique,optimized by BlackWidow Optimization(DRL-BWO)algorithm,for UAV networks.In addition,DRL involves an improved reinforcement learning-based Deep Belief Network(DBN)for intrusion detection.For parameter optimization of DRL technique,BWO algorithm is applied.It helps in improving the intrusion detection performance of UAV networks.An extensive set of experimental analysis was performed to highlight the supremacy of the proposed model.From the simulation values,it is evident that the proposed method is appropriate as it attained high precision,recall,F-measure,and accuracy values such as 0.985,0.993,0.988,and 0.989 respectively.
基金support provided by the Ministry of Science and Technology,Taiwan,ROC under Contract No.MOST 110-2221-E-019-044.
文摘How to accelerate the convergence speed and avoid computing the inversion of a Jacobian matrix is important in the solution of nonlinear algebraic equations(NAEs).This paper develops an approach with a splitting-linearizing technique based on the nonlinear term to reduce the effect of the nonlinear terms.We decompose the nonlinear terms in the NAEs through a splitting parameter and then linearize the NAEs around the values at the previous step to a linear system.Through the maximal orthogonal projection concept,to minimize a merit function within a selected interval of splitting parameters,the optimal parameters can be quickly determined.In each step,a linear system is solved by the Gaussian elimination method,and the whole iteration procedure is convergent very fast.Several numerical tests show the high performance of the optimal split-linearization iterative method(OSLIM).
基金the National Natural Science Founda-tion of China (Nos. 60802058 and 60832009)the SMC Young Teacher Sponsorship of Shanghai JiaotongUniversity
文摘Spectrum sensing is an important part of cognitive radio systems to find spectrum hole for transmission which enables cognitive radio systems coexist with the authorized radio systems without harmful interference.In this paper,an improved cyclostationary feature detection method is proposed to reduce computational complexity without loss of good performance based on the optimal parameter selection strategy for choosing detection parameters of cyclic frequency and lag.Taking binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK) signals as examples,the theoretical analyses are presented for choosing the optimal parameters.Simulation results are given to certify the correctness of the proposed parameter selection strategy and show the performance of the proposed method.
基金project of the“The University Synergy Innovation Program of Anhui Province(GXXT-2019-004)”,“Natural Science Research Project of Anhui Universities(KJ2021ZD0144)”,“Wuhu Key R&D Project:Research and Industrialization of Intelligent Control Method of Engine Energy-Feeding Hydraulic Semi-Active Mount”.
文摘The aim of the study is to determine the optimal structural parameters for a plastic centrifugal pump inducer within the framework of an orthogonal experimental method.For this purpose,a numerical study of the related flow field is performed using CFX.The shaft power and the head of the pump are taken as the evaluation indicators.Accordingly,the examined variables are the thickness(S),the blade cascade degree(t),the blade rim angle(β1),the blade hub angle(β2)and the hub length(L).The impact of each structural parameter on each evaluation index is examined and special attention is paid to the following combinations:S2 mm,t 2,β1235°,β2360°and L 140 mm(corresponding to a maximum head of 98.15 m);S 5 mm,t 1.6,β1252°,β2350°and L 140 mm(corresponding to a minimum shaft power of 63.06 KW).Moreover,using least squares and fish swarm algorithms,the pump shaft power and head are further optimized,yielding the following optimal combination:S 5 mm,t 1.9,β1252°,β2360°and L 145 mm(corresponding to the maximum head of 91.90 m,and a minimum shaft power of 64.83 KW).
基金Sponsored by the Specialized Research Fund for the Doctoral Program of Higher Education(Grant No. 20050213006)
文摘A new mothod was presented to find the optimal location and parameter setting of Thyristor Controlled Series Compensator (TCSC) to maxmize the transfer capability.Firstly the sensitivity of the transfer capability with respect was described to the line's reactance was described to find the more sensitive lines for installing TCSC,however,the line which has the most sesitivity value is always not the best line for installing TCSC.For solving this problem,the more sensitive m lines were selected as the alternative line group of installing TCSC,and then modified particle swarm optimization (MPSO) was used to find out the optimal location and the optimal parameter settings of TCSC.Particle swarm optimization (PSO) algorithm can results premature convergence.For solving this problem,population entropy and cellular automata were introduced to it.Simulation results of IEEE 30-bus system proved the effectiveness of the method and its application values.
基金Supported by National Natural Science Foundation of China(Grant No.12071491)Guangzhou Science and Technology Plan Project(Grant No.202102080177).
文摘By using the weight function method,the matching parameters of the half discrete Hilbert type multiple integral inequality with a non-homogeneous kernel K(n,||x||ρ,m)=G(nλ1||x||ρmλ,2)are discussed,some equivalent conditions of the optimal matching parameter are established,and the expression of the optimal constant factor is obtained.Finally,their applications in operator theory are considered.
文摘Medical image classification becomes a vital part of the design of computer aided diagnosis(CAD)models.The conventional CAD models are majorly dependent upon the shapes,colors,and/or textures that are problem oriented and exhibited complementary in medical images.The recently developed deep learning(DL)approaches pave an efficient method of constructing dedicated models for classification problems.But the maximum resolution of medical images and small datasets,DL models are facing the issues of increased computation cost.In this aspect,this paper presents a deep convolutional neural network with hierarchical spiking neural network(DCNN-HSNN)for medical image classification.The proposed DCNN-HSNN technique aims to detect and classify the existence of diseases using medical images.In addition,region growing segmentation technique is involved to determine the infected regions in the medical image.Moreover,NADAM optimizer with DCNN based Capsule Network(CapsNet)approach is used for feature extraction and derived a collection of feature vectors.Furthermore,the shark smell optimization algorithm(SSA)based HSNN approach is utilized for classification process.In order to validate the better performance of the DCNN-HSNN technique,a wide range of simulations take place against HIS2828 and ISIC2017 datasets.The experimental results highlighted the effectiveness of the DCNN-HSNN technique over the recent techniques interms of different measures.Please type your abstract here.
文摘The primary factor contributing to frequency instability in microgrids is the inherent intermittency of renewable energy sources.This paper introduces novel dual-backup controllers utilizing advanced fractional order proportional integral derivative(FOPID)controllers to enhance frequency and tie-line power stability in microgrids amid increasing renewable energy integration.To improve load frequency control,the proposed controllers are applied to a two-area interconnectedmicrogrid system incorporating diverse energy sources,such as wind turbines,photovoltaic cells,diesel generators,and various storage technologies.A novelmeta-heuristic algorithm is adopted to select the optimal parameters of the proposed controllers.The efficacy of the advanced FOPID controllers is demonstrated through comparative analyses against traditional proportional integral derivative(PID)and FOPID controllers,showcasing superior performance inmanaging systemfluctuations.The optimization algorithm is also evaluated against other artificial intelligent methods for parameter optimization,affirming the proposed solution’s efficiency.The robustness of the intelligent controllers against system uncertainties is further validated under extensive power disturbances,proving their capability to maintain grid stability.The dual-controller configuration ensures redundancy,allowing them to operate as mutual backups,enhancing system reliability.This research underlines the importance of sophisticated control strategies for future-proofing microgrid operations against the backdrop of evolving energy landscapes.
文摘Mathematical models for phenomena in the physical sciences are typically parameter-dependent, and the estimation of parameters that optimally model the trends suggested by experimental observation depends on how model-observation discrepancies are quantified. Commonly used parameter estimation techniques based on least-squares minimization of the model-observation discrepancies assume that the discrepancies are quantified with the L<sup>2</sup>-norm applied to a discrepancy function. While techniques based on such an assumption work well for many applications, other applications are better suited for least-squared minimization approaches that are based on other norm or inner-product induced topologies. Motivated by an application in the material sciences, the new alternative least-squares approach is defined and an insightful analytical comparison with a baseline least-squares approach is provided.
基金National Natural Science Foundation of China(31700644)Shandong Province Postdoctoral Innovation Project(SDCX-ZG-202400195)。
文摘The conventional honey production is dominated by fragmented,small-scale individual farming models.The traditional approach of honey-harvesting involving manual beehive frames extraction,beeswax layer excision and centrifugal honey separation,expose beekeepers to potential bee stings and frequently compromise honeycomb integrity.To address these limitations,we designed an automated honey-harvesting robot capable of autonomous frame extraction and beeswax removal.The robot mainly consists of a mobile mechanism equipped with image recognition for beehive localization,a magnetic adsorption-based beehive frame handling device(60.8 N maximum suction)coupled with a cross-slide mechanism for precise frame manipulation,and a thermal beeswax layer-melting apparatus,with optimal melting parameters(15 m/s airflow at 90℃ for 30 seconds)determined through rigorous thermal flow simulations utilizing FLUENT/Mechanical software.Field experiments demonstrated beehive frames handling success rate exceeding 85%,beeswax layer removal efficacy over 80% and damage of honeycombs below 30%.The experiment results validate the robot's operational reliability and its capacity to automate critical harvesting procedures.This study significantly reduces the labor intensity for beekeepers,effectively eliminates the risk of direct human-bee contact and improves the removal of beeswax layer,thereby catalyzing the modernization of the beekeeping industry.
基金sponsored by the National Natural Science Foundation of China,China(No.52304002).
文摘Rocking the drillstring at the surface during slide drilling is a common method for reducing drag when drilling horizontal wells.However,the current methods for determining the parameters for rocking are insufficient,limiting the widespread use of this technology.In this study,the influence of rocking parameters on the friction-reduction effect was investigated using an axialetorsional dynamic model of the drillstring and an experimental apparatus for rocking-assisted slide drilling in a simulated horizontal well.The research shows that increasing the rocking speed is beneficial improving the friction-reduction effect,but there is a diminishing marginal effect.A method was proposed to optimize the rocking speed using the equivalent axial drag coefficienterocking speed curve.Under the influence of rocking,the downhole weight on bit(WOB)exhibits a sinusoidal-like variation,with the predominant frequency being twice the rocking frequency.The fluctuation amplitude of the WOB in the horizontal section has a linear relationship with the rocking-affected depth.Based on this,a method was proposed to estimate the rockingaffected depth using the fluctuation amplitude of the standpipe pressure difference.Application of this method in the drilling field has improved the rate of penetration and toolface stability,demonstrating the reliability and effectiveness of the methods proposed in this paper.
基金supported by the National Natural Science Foundation of China(Nos.52204136,52474100,and 52204092).
文摘Web pillars enduring complex coupled loads are critical for stability in high-wall mining.This study develops a dynamic failure criterion for web pillars under non-uniform loading using catastrophe theory.Through the analysis of the web pillar-overburden system’s dynamic stress and deformation,a total potential energy function and dynamic failure criterion were established for web pillars.An optimizing method for web pillar parameters was developed in highwall mining.The dynamic criterion established was used to evaluate the dynamic failure and stability of web pillars under static and dynamic loading.Key findings reveal that vertical displacements exhibit exponential-trigonometric variation under static loads and multi-variable power-law behavior under dynamic blasting.Instability risks arise when the roof’s tensile strength-to-stress ratio drops below 1.Using catastrophe theory,the bifurcation setΔ<0 signals sudden instability.The criterion defines failure as when the unstable web pillar section length l1 exceeds the roof’s critical collapse distance l2.Case studies and simulations determine an optimal web pillar width of 4.6 m.This research enhances safety and resource recovery,providing a theoretical framework for advancing highwall mining technology.
基金supported by the Science and Technology Research Program of Chongqing Municipal Education Commission(KJQN202401501,KJZD-M202401501).
文摘This work proposes an optimization method for gas storage operation parameters under multi-factor coupled constraints to improve the peak-shaving capacity of gas storage reservoirs while ensuring operational safety.Previous research primarily focused on integrating reservoir,wellbore,and surface facility constraints,often resulting in broad constraint ranges and slow model convergence.To solve this problem,the present study introduces additional constraints on maximum withdrawal rates by combining binomial deliverability equations with material balance equations for closed gas reservoirs,while considering extreme peak-shaving demands.This approach effectively narrows the constraint range.Subsequently,a collaborative optimization model with maximum gas production as the objective function is established,and the model employs a joint solution strategy combining genetic algorithms and numerical simulation techniques.Finally,this methodology was applied to optimize operational parameters for Gas Storage T.The results demonstrate:(1)The convergence of the model was achieved after 6 iterations,which significantly improved the convergence speed of the model;(2)The maximum working gas volume reached 11.605×10^(8) m^(3),which increased by 13.78%compared with the traditional optimization method;(3)This method greatly improves the operation safety and the ultimate peak load balancing capability.The research provides important technical support for the intelligent decision of injection and production parameters of gas storage and improving peak load balancing ability.
