An effort to model the dynamic optimal advertising was made with the uncertainty of sales responses in consideration. The problem of dynamic advertising was depicted as a Markov decision process with two state variabl...An effort to model the dynamic optimal advertising was made with the uncertainty of sales responses in consideration. The problem of dynamic advertising was depicted as a Markov decision process with two state variables. When a firm launches an advertising campaign, it may predict the probability that the campaign will obtain the sales réponse. This probability was chosen as one state variable. Cumulative sales volume was chosen as another state variable which varies randomly with advertising. The only decision variable was advertising expenditure. With these variables, a multi-stage Markov decision process model was formulat ed. On the basis of some propositions the model was analyzed. Some analytical results about the optimal strategy have been derived, and their practical implications have been explained.展开更多
This research focuses on using BIM modeling optimization to control construction-period risks in the pre-construction stage of industrial factory buildings.It analyzes common risk factors and limitations of traditiona...This research focuses on using BIM modeling optimization to control construction-period risks in the pre-construction stage of industrial factory buildings.It analyzes common risk factors and limitations of traditional approaches.BIM-based methods like collision detection,4D simulation,multi-dimensional data integration,etc.,can effectively mitigate risks.Stakeholder collaboration,digital twin testing,and lean BIM integration is also crucial.Case studies show BIM can reduce risks by 32-41%,with a three phase roadmap provided.展开更多
Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the ...Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.展开更多
High-dimensional data causes difficulties in machine learning due to high time consumption and large memory requirements.In particular,in amulti-label environment,higher complexity is required asmuch as the number of ...High-dimensional data causes difficulties in machine learning due to high time consumption and large memory requirements.In particular,in amulti-label environment,higher complexity is required asmuch as the number of labels.Moreover,an optimization problem that fully considers all dependencies between features and labels is difficult to solve.In this study,we propose a novel regression-basedmulti-label feature selectionmethod that integrates mutual information to better exploit the underlying data structure.By incorporating mutual information into the regression formulation,the model captures not only linear relationships but also complex non-linear dependencies.The proposed objective function simultaneously considers three types of relationships:(1)feature redundancy,(2)featurelabel relevance,and(3)inter-label dependency.These three quantities are computed usingmutual information,allowing the proposed formulation to capture nonlinear dependencies among variables.These three types of relationships are key factors in multi-label feature selection,and our method expresses them within a unified formulation,enabling efficient optimization while simultaneously accounting for all of them.To efficiently solve the proposed optimization problem under non-negativity constraints,we develop a gradient-based optimization algorithm with fast convergence.Theexperimental results on sevenmulti-label datasets show that the proposed method outperforms existingmulti-label feature selection techniques.展开更多
Oil product pipelines have features such as transporting multiple materials, ever-changing operating conditions, and synchronism between the oil input plan and the oil offloading plan. In this paper, an optimal model ...Oil product pipelines have features such as transporting multiple materials, ever-changing operating conditions, and synchronism between the oil input plan and the oil offloading plan. In this paper, an optimal model was established for a single-source multi-distribution oil pro- duct pipeline, and scheduling plans were made based on supply. In the model, time node constraints, oil offloading plan constraints, and migration of batch constraints were taken into consideration. The minimum deviation between the demanded oil volumes and the actual offloading volumes was chosen as the objective function, and a linear programming model was established on the basis of known time nodes＇ sequence. The ant colony optimization algo- rithm and simplex method were used to solve the model. The model was applied to a real pipeline and it performed well.展开更多
Groundwater resources occur in a multi aquifer system in the alluvial coastal plain near Beihai, China. The aquifers receive recharge from precipitation, canal and reservoir infiltration, and discharge through subter...Groundwater resources occur in a multi aquifer system in the alluvial coastal plain near Beihai, China. The aquifers receive recharge from precipitation, canal and reservoir infiltration, and discharge through subterranean drainage into the sea and through artificial pumping. A quasi three dimensional finite element model has been used to simulate the spatial and temporal distribution of groundwater levels in the aquifers. Various input parameters were considered in the simulation model. A linear optimization model has been developed for groundwater development within the coastal aquifers. The objective function of the model is to maximize the total groundwater pumpage from the confined aquifer. The control of sea water intrusion is examined by the restriction of the water levels at points along the coast and of the pumping rates in coastal management cells. The response matrix used in the optimization model was generated from the simulation model by forecasting drawdown produced by pumping at a unit impulse discharge. Groundwater development can be primarily optimized by the alteration of the pumping rates of the existing wells.展开更多
Platform planning is one of the important problems in the command and control(C2) field. Hereto, we analyze the platform planning problem and present nonlinear optimal model aiming at maximizing the task completion qu...Platform planning is one of the important problems in the command and control(C2) field. Hereto, we analyze the platform planning problem and present nonlinear optimal model aiming at maximizing the task completion qualities. Firstly, we take into account the relation among tasks and build the single task nonlinear optimal model with a set of platform constraints. The Lagrange relaxation method and the pruning strategy are used to solve the model. Secondly, this paper presents optimization-based planning algorithms for efficiently allocating platforms to multiple tasks. To achieve the balance of the resource assignments among tasks, the m-best assignment algorithm and the pair-wise exchange(PWE)method are used to maximize multiple tasks completion qualities.Finally, a series of experiments are designed to verify the superiority and effectiveness of the proposed model and algorithms.展开更多
In this letter, an improved optimal velocity model was proposed that assumes the effect of relative velocity deceases with the increment of gap between successive cars. Numerical simuation was carried out to test whet...In this letter, an improved optimal velocity model was proposed that assumes the effect of relative velocity deceases with the increment of gap between successive cars. Numerical simuation was carried out to test whether this model could depict the braking process correctly. The simuation results show good agreement with observed data.展开更多
Pervious concrete is recommended,which is of great benefit to the ecological environment and human living environment.In this paper,the influences of five water-cement ratios and four fly ash contents to replace the c...Pervious concrete is recommended,which is of great benefit to the ecological environment and human living environment.In this paper,the influences of five water-cement ratios and four fly ash contents to replace the cement by mass with a water-cement ratio of 0.30 on the properties of Recycled Aggregate Pervious Concrete(RAPC)were studied.Following this,based on the Grey relational-Technique for Order Preference by Similarity to an Ideal Solution(TOPSIS)optimization method,the strength,permeability,abrasion loss rate,and material costs of RAPC were adopted as evaluation indices to establish a mix proportion optimization model.The results show that the increase of water-cement ratio and fly ash replacement level of RAPC leads to decreased compres-sive strength while an increase in the permeability and abrasion loss rate.According to test results based on the optimal model 0.30 was identified as the best mix proportion.In addition,ecological-economic analysis of RAPC raw materials was carried out by comparing different natural aggregates.The results of EE(embodied energy)and ECO 2e(embodied CO_(2) emission)pointed out that the combination of recycled aggregate and fly ash leads to sig-nificant ecological and economic benefits.展开更多
Although industrial processes often perform perfectly under design conditions, they may deviate from the optimal operating point owing to parameters drift, environmental disturbances, etc. Thus, it is necessary to dev...Although industrial processes often perform perfectly under design conditions, they may deviate from the optimal operating point owing to parameters drift, environmental disturbances, etc. Thus, it is necessary to develop efficacious strategies or procedure to assess the process performance online. In this paper, we explore the issue of operating optimality assessment for complex industrial processes based on performance-similarity considering nonlinearities and outliers simultaneously, and a general enforced online performance assessment framework is proposed. In the offline part, a new and modified total robust kernel projection to latent structures algorithm,T-KPRM, is proposed and used to evaluate the complex nonlinear industrial process, which can effectively extract the optimal-index-related process variation information from process data and establish assessment models for each performance grades overcoming the effects of outlier. In the online part, the online assessment results can be obtained by calculating the similarity between the online data from a sliding window and each of the performance grades. Furthermore, in order to improve the accuracy of online assessment, we propose an online assessment strategy taking account of the effects of noise and process uncertainties. The Euclidean distance between the sliding data window and the optimal evaluation level is employed to measure the contribution rates of variables, which indicate the possible reason for the non-optimal operating performance. The proposed framework is tested on a real industrial case: dense medium coal preparation process, and the results shows the efficiency of the proposed method comparing to the existing method.展开更多
Applications of process systems engineering(PSE)in plants and enterprises are boosting industrial reform from automation to digitization and intelligence.For ethylene thermal cracking,knowledge expression,numerical mo...Applications of process systems engineering(PSE)in plants and enterprises are boosting industrial reform from automation to digitization and intelligence.For ethylene thermal cracking,knowledge expression,numerical modeling and intelligent optimization are key steps for intelligent manufacturing.This paper provides an overview of progress and contributions to the PSE-aided production of thermal cracking;introduces the frameworks,methods and algorithms that have been proposed over the past10 years and discusses the advantages,limitations and applications in industrial practice.An entire set of molecular-level modeling approaches from feedstocks to products,including feedstock molecular reconstruction,reaction-network auto-generation and cracking unit simulation are described.Multilevel control and optimization methods are exhibited,including at the operational,cycle,plant and enterprise level.Relevant software packages are introduced.Finally,an outlook in terms of future directions is presented.展开更多
In order to resolve the coordination and optimization of the power network planning effectively, on the basis of introducing the concept of power intelligence center (PIC), the key factor power flow, line investment a...In order to resolve the coordination and optimization of the power network planning effectively, on the basis of introducing the concept of power intelligence center (PIC), the key factor power flow, line investment and load that impact generation sector, transmission sector and dispatching center in PIC were analyzed and a multi-objective coordination optimal model for new power intelligence center (NPIC) was established. To ensure the reliability and coordination of power grid and reduce investment cost, two aspects were optimized. The evolutionary algorithm was introduced to solve optimal power flow problem and the fitness function was improved to ensure the minimum cost of power generation. The gray particle swarm optimization (GPSO) algorithm was used to forecast load accurately, which can ensure the network with high reliability. On this basis, the multi-objective coordination optimal model which was more practical and in line with the need of the electricity market was proposed, then the coordination model was effectively solved through the improved particle swarm optimization algorithm, and the corresponding algorithm was obtained. The optimization of IEEE30 node system shows that the evolutionary algorithm can effectively solve the problem of optimal power flow. The average load forecasting of GPSO is 26.97 MW, which has an error of 0.34 MW compared with the actual load. The algorithm has higher forecasting accuracy. The multi-objective coordination optimal model for NPIC can effectively process the coordination and optimization problem of power network.展开更多
In this article,we present an application of Adaptive Genetic Algorithm Energy Demand Estimation(AGAEDE) optimal model to improve the efficiency of energy demand prediction.The coefficients of the two forms of the mod...In this article,we present an application of Adaptive Genetic Algorithm Energy Demand Estimation(AGAEDE) optimal model to improve the efficiency of energy demand prediction.The coefficients of the two forms of the model(both linear and quadratic) are optimized by AGA using factors,such as GDP,population,urbanization rate,and R&D inputs together with energy consumption structure,that affect demand.Since the spurious regression phenomenon occurs for a wide range of time series analysis in econometrics,we also discuss this problem for the current artificial intelligence model.The simulation results show that the proposed model is more accurate and reliable compared with other existing methods and the China's energy demand will be 5.23 billion TCE in 2020 according to the average results of the AGAEDE optimal model.Further discussion illustrates that there will be great pressure for China to fulfill the planned goal of controlling energy demand set in the National Energy Demand Project(2014—2020).展开更多
In this paper, the velocity anticipation in the optimal velocity model （OVM） is investigated. The driver adjusts the velocity of his vehicle by the desired headway, which depends on both instantaneous headway and re...In this paper, the velocity anticipation in the optimal velocity model （OVM） is investigated. The driver adjusts the velocity of his vehicle by the desired headway, which depends on both instantaneous headway and relative velocity. The effect of relative velocity is measured by a sensitivity function. A specific form of the sensitivity function is supposed and the involved parameters are determined by the both numerical simulation and empirical data. It is shown that inclusion of velocity anticipation enhances the stability of traffic flow. Numerical simulations show a good agreement with empirical data. This model provides a better description of real traffic, including the acceleration process from standing states and the deceleration process approaching a stopped car.展开更多
As the large-scale development of wind farms(WFs)progresses,the connection ofWFs to the regional power grid is evolving from the conventional receiving power grid to the sending power grid with a high proportion of wi...As the large-scale development of wind farms(WFs)progresses,the connection ofWFs to the regional power grid is evolving from the conventional receiving power grid to the sending power grid with a high proportion of wind power(WP).Due to the randomness of WP output,higher requirements are put forward for the voltage stability of each node of the regional power grid,and various reactive power compensation devices(RPCDs)need to be rationally configured to meet the stable operation requirements of the system.This paper proposes an optimal configuration method for multi-type RPCDs in regional power grids with a high proportion of WP.The RPCDs are located according to the proposed static voltage stability index(VSI)and dynamicVSI based on dynamic voltage drop area,and the optimal configuration model of RPCDs is constructed with the lowest construction cost as the objective function to determine the installed capacity of various RPCDs.Finally,the corresponding regional power grid model for intensive access to WFs is constructed on the simulation platform to verify the effectiveness of the proposed method.展开更多
The mixed model of improved exponential and power function and unequal interval gray GM(1,1)model have poor accuracy in predicting the maximum pull-out load of anchor bolts.An optimal combination model was derived usi...The mixed model of improved exponential and power function and unequal interval gray GM(1,1)model have poor accuracy in predicting the maximum pull-out load of anchor bolts.An optimal combination model was derived using the optimally weighted combination theory and the minimum sum of logarithmic squared errors as the objective function.Two typical anchor bolt pull-out engineering cases were selected to compare the performance of the proposed model with those of existing ones.Results showed that the optimal combination model was suitable not only for the slow P-s curve but also for the steep P-s curve.Its accuracy and stable reliability,as well as its prediction capability classification,were better than those of the other prediction models.Therefore,the optimal combination model is an effective processing method for predicting the maximum pull-out load of anchor bolts according to measured data.展开更多
In this study, a linear model predictive control(MPC) approach with optimal filters is proposed for handling unmeasured disturbances with arbitrary statistics. Two types of optimal filters are introduced into the fram...In this study, a linear model predictive control(MPC) approach with optimal filters is proposed for handling unmeasured disturbances with arbitrary statistics. Two types of optimal filters are introduced into the framework of MPC to relax the assumption of integrated white noise model in existing approaches. The introduced filters are globally optimal for linear systems with unmeasured disturbances that have unknown statistics. This enables the proposed MPC to better handle disturbances without access to disturbance statistics. As a result, the effort required for disturbance modeling can be alleviated. The proposed MPC can achieve offset-free control in the presence of asymptotically constant unmeasured disturbances. Simulation results demonstrate that the proposed approach can provide an improved disturbance ?rejection performance over conventional approaches when applied to the control of systems with unmeasured disturbances that have arbitrary statistics.展开更多
The class of bi-directional optimal velocity models can describe the bi-directional looking effect that usually exists in the reality and is even enhanced with the development of the connected vehicle technologies. It...The class of bi-directional optimal velocity models can describe the bi-directional looking effect that usually exists in the reality and is even enhanced with the development of the connected vehicle technologies. Its combined string stability condition can be obtained through the method of the ring-road based string stability analysis. However, the partial string stability about traffic fluctuation propagated backward or forward was neglected, which will be analyzed in detail in this work by the method of transfer function and its H∞ norm from the viewpoint of control theory. Then, through comparing the conditions of combined and partial string stabilities, their relationships can make traffic flow be divided into three distinguishable regions, displaying various combined and partial string stability performance. Finally, the numerical experiments verify the theoretical results and find that the final displaying string stability or instability performance results from the accumulated and offset effects of traffic fluctuations propagated from different directions.展开更多
Background： Forest fertilization offers a means to increase the production of renewable resources.Nitrogen is the most common fertilizer in boreal upland forests.There is plenty of research on the effect of nitrogen ...Background： Forest fertilization offers a means to increase the production of renewable resources.Nitrogen is the most common fertilizer in boreal upland forests.There is plenty of research on the effect of nitrogen fertilization on volume growth, but less research on the optimal timing of fertilization and optimal management of fertilized stands.Methods： This study used simulation and optimization to analyze the profitability of fertilization, optimal management of fertilized stands and the effects of fertilization on cash flows and timber yields.The management of 100 stands representing the most common growing sites of Scots pine and Norway spruce was optimized.Results： Fertilization improved profitability in most of the analyzed stands.Profitability improved most in spruce stands growing on mesic site.Improving stem quality increased the economic benefit of fertilization.The timber yields of medium-aged conifer stands can be increased by almost 1 m^3·ha^（-1）·a^（-1）（15%） in sub-xeric pine and mesic spruce sites and about 0.5 m^3·ha^（-1）·a^（-1）（5%） in mesic pine and herb-rich spruce sites when the recommended nitrogen dose（150kg·ha^（-1）） is applied once in 30 years.Conclusions： Nitrogen fertilization of boreal conifer forest should be used mainly in spruce-dominated stands growing on medium sites.The gains are the highest in stands where the mean tree diameter is 16–20 cm and stand basal area is 14–20 m^2·ha^（-1）.展开更多
Low pressure chemical vapor deposition(LPCVD) is one of the most important processes during semiconductor manufacturing.However,the spatial distribution of internal temperature and extremely few samples makes it hard ...Low pressure chemical vapor deposition(LPCVD) is one of the most important processes during semiconductor manufacturing.However,the spatial distribution of internal temperature and extremely few samples makes it hard to build a good-quality model of this batch process.Besides,due to the properties of this process,the reliability of the model must be taken into consideration when optimizing the MVs.In this work,an optimal design strategy based on the self-learning Gaussian process model(GPM) is proposed to control this kind of spatial batch process.The GPM is utilized as the internal model to predict the thicknesses of thin films on all spatial-distributed wafers using the limited data.Unlike the conventional model based design,the uncertainties of predictions provided by GPM are taken into consideration to guide the optimal design of manipulated variables so that the designing can be more prudent Besides,the GPM is also actively enhanced using as little data as possible based on the predictive uncertainties.The effectiveness of the proposed strategy is successfully demonstrated in an LPCVD process.展开更多
基金This work was supported by the National Natural Science Foundation(No.70271021).
文摘An effort to model the dynamic optimal advertising was made with the uncertainty of sales responses in consideration. The problem of dynamic advertising was depicted as a Markov decision process with two state variables. When a firm launches an advertising campaign, it may predict the probability that the campaign will obtain the sales réponse. This probability was chosen as one state variable. Cumulative sales volume was chosen as another state variable which varies randomly with advertising. The only decision variable was advertising expenditure. With these variables, a multi-stage Markov decision process model was formulat ed. On the basis of some propositions the model was analyzed. Some analytical results about the optimal strategy have been derived, and their practical implications have been explained.
文摘This research focuses on using BIM modeling optimization to control construction-period risks in the pre-construction stage of industrial factory buildings.It analyzes common risk factors and limitations of traditional approaches.BIM-based methods like collision detection,4D simulation,multi-dimensional data integration,etc.,can effectively mitigate risks.Stakeholder collaboration,digital twin testing,and lean BIM integration is also crucial.Case studies show BIM can reduce risks by 32-41%,with a three phase roadmap provided.
文摘Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.
基金supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(RS-2020-NR049579).
文摘High-dimensional data causes difficulties in machine learning due to high time consumption and large memory requirements.In particular,in amulti-label environment,higher complexity is required asmuch as the number of labels.Moreover,an optimization problem that fully considers all dependencies between features and labels is difficult to solve.In this study,we propose a novel regression-basedmulti-label feature selectionmethod that integrates mutual information to better exploit the underlying data structure.By incorporating mutual information into the regression formulation,the model captures not only linear relationships but also complex non-linear dependencies.The proposed objective function simultaneously considers three types of relationships:(1)feature redundancy,(2)featurelabel relevance,and(3)inter-label dependency.These three quantities are computed usingmutual information,allowing the proposed formulation to capture nonlinear dependencies among variables.These three types of relationships are key factors in multi-label feature selection,and our method expresses them within a unified formulation,enabling efficient optimization while simultaneously accounting for all of them.To efficiently solve the proposed optimization problem under non-negativity constraints,we develop a gradient-based optimization algorithm with fast convergence.Theexperimental results on sevenmulti-label datasets show that the proposed method outperforms existingmulti-label feature selection techniques.
基金part of the Program of"Study on the mechanism of complex heat and mass transfer during batch transport process in products pipelines"funded under the National Natural Science Foundation of China(grant number 51474228)
文摘Oil product pipelines have features such as transporting multiple materials, ever-changing operating conditions, and synchronism between the oil input plan and the oil offloading plan. In this paper, an optimal model was established for a single-source multi-distribution oil pro- duct pipeline, and scheduling plans were made based on supply. In the model, time node constraints, oil offloading plan constraints, and migration of batch constraints were taken into consideration. The minimum deviation between the demanded oil volumes and the actual offloading volumes was chosen as the objective function, and a linear programming model was established on the basis of known time nodes＇ sequence. The ant colony optimization algo- rithm and simplex method were used to solve the model. The model was applied to a real pipeline and it performed well.
基金This paper is partially supported by the Fund for Young Geologists in the Ministry of Geology and Mineral Resources of China(
文摘Groundwater resources occur in a multi aquifer system in the alluvial coastal plain near Beihai, China. The aquifers receive recharge from precipitation, canal and reservoir infiltration, and discharge through subterranean drainage into the sea and through artificial pumping. A quasi three dimensional finite element model has been used to simulate the spatial and temporal distribution of groundwater levels in the aquifers. Various input parameters were considered in the simulation model. A linear optimization model has been developed for groundwater development within the coastal aquifers. The objective function of the model is to maximize the total groundwater pumpage from the confined aquifer. The control of sea water intrusion is examined by the restriction of the water levels at points along the coast and of the pumping rates in coastal management cells. The response matrix used in the optimization model was generated from the simulation model by forecasting drawdown produced by pumping at a unit impulse discharge. Groundwater development can be primarily optimized by the alteration of the pumping rates of the existing wells.
基金supported by the National Natural Science Foundation of China(61573017 61703425)+2 种基金the Aeronautical Science Fund(20175796014)the Shaanxi Province Natural Science Foundation Research Project(2016JQ6062 2017JM6062)
文摘Platform planning is one of the important problems in the command and control(C2) field. Hereto, we analyze the platform planning problem and present nonlinear optimal model aiming at maximizing the task completion qualities. Firstly, we take into account the relation among tasks and build the single task nonlinear optimal model with a set of platform constraints. The Lagrange relaxation method and the pruning strategy are used to solve the model. Secondly, this paper presents optimization-based planning algorithms for efficiently allocating platforms to multiple tasks. To achieve the balance of the resource assignments among tasks, the m-best assignment algorithm and the pair-wise exchange(PWE)method are used to maximize multiple tasks completion qualities.Finally, a series of experiments are designed to verify the superiority and effectiveness of the proposed model and algorithms.
文摘In this letter, an improved optimal velocity model was proposed that assumes the effect of relative velocity deceases with the increment of gap between successive cars. Numerical simuation was carried out to test whether this model could depict the braking process correctly. The simuation results show good agreement with observed data.
基金This work was supported by the National Natural Science Foundation of China(No.52009045)National Key Research and Development Program of China(No.2018YFC0406902).
文摘Pervious concrete is recommended,which is of great benefit to the ecological environment and human living environment.In this paper,the influences of five water-cement ratios and four fly ash contents to replace the cement by mass with a water-cement ratio of 0.30 on the properties of Recycled Aggregate Pervious Concrete(RAPC)were studied.Following this,based on the Grey relational-Technique for Order Preference by Similarity to an Ideal Solution(TOPSIS)optimization method,the strength,permeability,abrasion loss rate,and material costs of RAPC were adopted as evaluation indices to establish a mix proportion optimization model.The results show that the increase of water-cement ratio and fly ash replacement level of RAPC leads to decreased compres-sive strength while an increase in the permeability and abrasion loss rate.According to test results based on the optimal model 0.30 was identified as the best mix proportion.In addition,ecological-economic analysis of RAPC raw materials was carried out by comparing different natural aggregates.The results of EE(embodied energy)and ECO 2e(embodied CO_(2) emission)pointed out that the combination of recycled aggregate and fly ash leads to sig-nificant ecological and economic benefits.
基金Supported by the National Natural Science Foundation of China(61503384,61603393)Natural Science Foundation of Jiangsu(BK20150199,BK20160275)+1 种基金the Foundation Research Funds for the Central Universities(2015QNA65)the Postdoctoral Foundation of Jiangsu Province(1501081B)
文摘Although industrial processes often perform perfectly under design conditions, they may deviate from the optimal operating point owing to parameters drift, environmental disturbances, etc. Thus, it is necessary to develop efficacious strategies or procedure to assess the process performance online. In this paper, we explore the issue of operating optimality assessment for complex industrial processes based on performance-similarity considering nonlinearities and outliers simultaneously, and a general enforced online performance assessment framework is proposed. In the offline part, a new and modified total robust kernel projection to latent structures algorithm,T-KPRM, is proposed and used to evaluate the complex nonlinear industrial process, which can effectively extract the optimal-index-related process variation information from process data and establish assessment models for each performance grades overcoming the effects of outlier. In the online part, the online assessment results can be obtained by calculating the similarity between the online data from a sliding window and each of the performance grades. Furthermore, in order to improve the accuracy of online assessment, we propose an online assessment strategy taking account of the effects of noise and process uncertainties. The Euclidean distance between the sliding data window and the optimal evaluation level is employed to measure the contribution rates of variables, which indicate the possible reason for the non-optimal operating performance. The proposed framework is tested on a real industrial case: dense medium coal preparation process, and the results shows the efficiency of the proposed method comparing to the existing method.
基金The authors gratefully acknowledge the National Natural Science Foundation of China for its financial support(U1462206).
文摘Applications of process systems engineering(PSE)in plants and enterprises are boosting industrial reform from automation to digitization and intelligence.For ethylene thermal cracking,knowledge expression,numerical modeling and intelligent optimization are key steps for intelligent manufacturing.This paper provides an overview of progress and contributions to the PSE-aided production of thermal cracking;introduces the frameworks,methods and algorithms that have been proposed over the past10 years and discusses the advantages,limitations and applications in industrial practice.An entire set of molecular-level modeling approaches from feedstocks to products,including feedstock molecular reconstruction,reaction-network auto-generation and cracking unit simulation are described.Multilevel control and optimization methods are exhibited,including at the operational,cycle,plant and enterprise level.Relevant software packages are introduced.Finally,an outlook in terms of future directions is presented.
基金Project (70671039) supported by the National Natural Science Foundation of China
文摘In order to resolve the coordination and optimization of the power network planning effectively, on the basis of introducing the concept of power intelligence center (PIC), the key factor power flow, line investment and load that impact generation sector, transmission sector and dispatching center in PIC were analyzed and a multi-objective coordination optimal model for new power intelligence center (NPIC) was established. To ensure the reliability and coordination of power grid and reduce investment cost, two aspects were optimized. The evolutionary algorithm was introduced to solve optimal power flow problem and the fitness function was improved to ensure the minimum cost of power generation. The gray particle swarm optimization (GPSO) algorithm was used to forecast load accurately, which can ensure the network with high reliability. On this basis, the multi-objective coordination optimal model which was more practical and in line with the need of the electricity market was proposed, then the coordination model was effectively solved through the improved particle swarm optimization algorithm, and the corresponding algorithm was obtained. The optimization of IEEE30 node system shows that the evolutionary algorithm can effectively solve the problem of optimal power flow. The average load forecasting of GPSO is 26.97 MW, which has an error of 0.34 MW compared with the actual load. The algorithm has higher forecasting accuracy. The multi-objective coordination optimal model for NPIC can effectively process the coordination and optimization problem of power network.
基金supported by the Fundamental Research Funds for the Central Universities[Grant No.JBK1507159]
文摘In this article,we present an application of Adaptive Genetic Algorithm Energy Demand Estimation(AGAEDE) optimal model to improve the efficiency of energy demand prediction.The coefficients of the two forms of the model(both linear and quadratic) are optimized by AGA using factors,such as GDP,population,urbanization rate,and R&D inputs together with energy consumption structure,that affect demand.Since the spurious regression phenomenon occurs for a wide range of time series analysis in econometrics,we also discuss this problem for the current artificial intelligence model.The simulation results show that the proposed model is more accurate and reliable compared with other existing methods and the China's energy demand will be 5.23 billion TCE in 2020 according to the average results of the AGAEDE optimal model.Further discussion illustrates that there will be great pressure for China to fulfill the planned goal of controlling energy demand set in the National Energy Demand Project(2014—2020).
基金supported by the National Basic Research Program of China (Grant No.2006CB705500)the National Natural Science Foundation of China (Grant Nos.10532060, 10672098)
文摘In this paper, the velocity anticipation in the optimal velocity model （OVM） is investigated. The driver adjusts the velocity of his vehicle by the desired headway, which depends on both instantaneous headway and relative velocity. The effect of relative velocity is measured by a sensitivity function. A specific form of the sensitivity function is supposed and the involved parameters are determined by the both numerical simulation and empirical data. It is shown that inclusion of velocity anticipation enhances the stability of traffic flow. Numerical simulations show a good agreement with empirical data. This model provides a better description of real traffic, including the acceleration process from standing states and the deceleration process approaching a stopped car.
基金supported by the Science and Technology Project of State Grid Corporation Headquarters(No.5100-202323008A-1-1-ZN).
文摘As the large-scale development of wind farms(WFs)progresses,the connection ofWFs to the regional power grid is evolving from the conventional receiving power grid to the sending power grid with a high proportion of wind power(WP).Due to the randomness of WP output,higher requirements are put forward for the voltage stability of each node of the regional power grid,and various reactive power compensation devices(RPCDs)need to be rationally configured to meet the stable operation requirements of the system.This paper proposes an optimal configuration method for multi-type RPCDs in regional power grids with a high proportion of WP.The RPCDs are located according to the proposed static voltage stability index(VSI)and dynamicVSI based on dynamic voltage drop area,and the optimal configuration model of RPCDs is constructed with the lowest construction cost as the objective function to determine the installed capacity of various RPCDs.Finally,the corresponding regional power grid model for intensive access to WFs is constructed on the simulation platform to verify the effectiveness of the proposed method.
基金The National Natural Science Foundation of China(No.51778485).
文摘The mixed model of improved exponential and power function and unequal interval gray GM(1,1)model have poor accuracy in predicting the maximum pull-out load of anchor bolts.An optimal combination model was derived using the optimally weighted combination theory and the minimum sum of logarithmic squared errors as the objective function.Two typical anchor bolt pull-out engineering cases were selected to compare the performance of the proposed model with those of existing ones.Results showed that the optimal combination model was suitable not only for the slow P-s curve but also for the steep P-s curve.Its accuracy and stable reliability,as well as its prediction capability classification,were better than those of the other prediction models.Therefore,the optimal combination model is an effective processing method for predicting the maximum pull-out load of anchor bolts according to measured data.
基金Supported by the Startup Foundation of Hangzhou Dianzi University(ZX150204302002/009)the Open Project Program of the State Key Laboratory of Industrial Control Technology(Zhejiang University)National Natural Science Foundation of China(No.61374142,61273145,and 61273146)
文摘In this study, a linear model predictive control(MPC) approach with optimal filters is proposed for handling unmeasured disturbances with arbitrary statistics. Two types of optimal filters are introduced into the framework of MPC to relax the assumption of integrated white noise model in existing approaches. The introduced filters are globally optimal for linear systems with unmeasured disturbances that have unknown statistics. This enables the proposed MPC to better handle disturbances without access to disturbance statistics. As a result, the effort required for disturbance modeling can be alleviated. The proposed MPC can achieve offset-free control in the presence of asymptotically constant unmeasured disturbances. Simulation results demonstrate that the proposed approach can provide an improved disturbance ?rejection performance over conventional approaches when applied to the control of systems with unmeasured disturbances that have arbitrary statistics.
基金Projects(51108465,71371192)supported by the National Natural Science Foundation of ChinaProject(2014M552165)supported by China Postdoctoral Science FoundationProject(20113187851460)supported by Technology Project of the Ministry of Transport of China
文摘The class of bi-directional optimal velocity models can describe the bi-directional looking effect that usually exists in the reality and is even enhanced with the development of the connected vehicle technologies. Its combined string stability condition can be obtained through the method of the ring-road based string stability analysis. However, the partial string stability about traffic fluctuation propagated backward or forward was neglected, which will be analyzed in detail in this work by the method of transfer function and its H∞ norm from the viewpoint of control theory. Then, through comparing the conditions of combined and partial string stabilities, their relationships can make traffic flow be divided into three distinguishable regions, displaying various combined and partial string stability performance. Finally, the numerical experiments verify the theoretical results and find that the final displaying string stability or instability performance results from the accumulated and offset effects of traffic fluctuations propagated from different directions.
文摘Background： Forest fertilization offers a means to increase the production of renewable resources.Nitrogen is the most common fertilizer in boreal upland forests.There is plenty of research on the effect of nitrogen fertilization on volume growth, but less research on the optimal timing of fertilization and optimal management of fertilized stands.Methods： This study used simulation and optimization to analyze the profitability of fertilization, optimal management of fertilized stands and the effects of fertilization on cash flows and timber yields.The management of 100 stands representing the most common growing sites of Scots pine and Norway spruce was optimized.Results： Fertilization improved profitability in most of the analyzed stands.Profitability improved most in spruce stands growing on mesic site.Improving stem quality increased the economic benefit of fertilization.The timber yields of medium-aged conifer stands can be increased by almost 1 m^3·ha^（-1）·a^（-1）（15%） in sub-xeric pine and mesic spruce sites and about 0.5 m^3·ha^（-1）·a^（-1）（5%） in mesic pine and herb-rich spruce sites when the recommended nitrogen dose（150kg·ha^（-1）） is applied once in 30 years.Conclusions： Nitrogen fertilization of boreal conifer forest should be used mainly in spruce-dominated stands growing on medium sites.The gains are the highest in stands where the mean tree diameter is 16–20 cm and stand basal area is 14–20 m^2·ha^（-1）.
基金Supported by the National High Technology Research and Development Program of China(2014AA041803)the National Natural Science Foundation of China(61320106009)
文摘Low pressure chemical vapor deposition(LPCVD) is one of the most important processes during semiconductor manufacturing.However,the spatial distribution of internal temperature and extremely few samples makes it hard to build a good-quality model of this batch process.Besides,due to the properties of this process,the reliability of the model must be taken into consideration when optimizing the MVs.In this work,an optimal design strategy based on the self-learning Gaussian process model(GPM) is proposed to control this kind of spatial batch process.The GPM is utilized as the internal model to predict the thicknesses of thin films on all spatial-distributed wafers using the limited data.Unlike the conventional model based design,the uncertainties of predictions provided by GPM are taken into consideration to guide the optimal design of manipulated variables so that the designing can be more prudent Besides,the GPM is also actively enhanced using as little data as possible based on the predictive uncertainties.The effectiveness of the proposed strategy is successfully demonstrated in an LPCVD process.
