Based on the polynomial interpolation, a new finite difference （FD） method in solving the full-vectorial guidedmodes for step-index optical waveguides is proposed. The discontinuities of the normal components of the...Based on the polynomial interpolation, a new finite difference （FD） method in solving the full-vectorial guidedmodes for step-index optical waveguides is proposed. The discontinuities of the normal components of the electric field across abrupt dielectric interfaces are considered in the absence of the limitations of scalar and semivectorial approximation, and the present PD scheme can be applied to both uniform and non-uniform mesh grids. The modal propagation constants and field distributions for buried rectangular waveguides and optical rib waveguides are presented. The hybrid nature of the vectorial modes is demonstrated and the singular behaviours of the minor field components in the corners are observed. Moreover, solutions are in good agreement with those published early, which tests the validity of the present approach.展开更多
A Lithium niobate （LiNbO3） based integrated optical E-field sensor with an optical waveguide Mach-Zehnder interferometer （MZI） and a tapered antenna has been designed and fabricated for the measurement of the puls...A Lithium niobate （LiNbO3） based integrated optical E-field sensor with an optical waveguide Mach-Zehnder interferometer （MZI） and a tapered antenna has been designed and fabricated for the measurement of the pulsed electric field. The minimum detectable E-field of the sensor was 10kV/m. The sensor showed a good linear characteristic while the input E-fields varied from 10kV/m to 370kV/m. Furthermore, the maximum detectable E-field of the sensor, which could be calculated from the sensor input/output characteristic, was approximately equal to 1000kV/m. All these results suggest that such sensor can be used for the measurement of the lighting impulse electric field.展开更多
We propose and fabricate a vertically integrated thermo-optic waveguide switch. It controls the optical path between two vertically stacked waveguides using the thermo-optic effect of optical polymer. The measured cro...We propose and fabricate a vertically integrated thermo-optic waveguide switch. It controls the optical path between two vertically stacked waveguides using the thermo-optic effect of optical polymer. The measured crosstalk is less than -10 dB.展开更多
We report experimental realization of Raman spectra enhancement of copper phthalocyanine, using an on-chip metallic planar waveguide of the sub-millimeter scale. The oscillating ultrahigh order modes excited by the di...We report experimental realization of Raman spectra enhancement of copper phthalocyanine, using an on-chip metallic planar waveguide of the sub-millimeter scale. The oscillating ultrahigh order modes excited by the direct coupling method yield high optical intensity at resonance, which is different from the conventional strategy to create localized ＂hot spots.＂ The observed excitation efficiency of the Raman signal is significantly enhanced,owing to the high Q factor of the resonant cavity. Furthermore, effective modulation of the Raman intensity is available by adjusting the polymethyl methacrylate（PMMA） thickness in the guiding layer, i.e., by tuning the light–matter interaction length. A large modulation depth is verified through the fact that 10 times variation in the enhancement factor is observed in the experiment as the PMMA thickness varies from 7 to 23 μm.展开更多
Efficient coupling from the silicon waveguide to the GeSi layer is the key to success in the GeSi electro-absorption （EA） modulator based on evanescent coupling. A lateral taper in the upper GeSi layer has room for ...Efficient coupling from the silicon waveguide to the GeSi layer is the key to success in the GeSi electro-absorption （EA） modulator based on evanescent coupling. A lateral taper in the upper GeSi layer has room for increasing the modulating efficiency and alleviating the sensitivity of the extinction ratio （ER） and insertion loss （IL） to the length of the active region. The light behavior and the effect of the taper are explored in detail using the beam propagation method （BPM）. After optimization, the light can nearly be totally confined in the GeSi layer without any oscillation. The modulator with the designed taper can achieve low IL and high ER.展开更多
With progress in fabrication technology, integrated photonics plays an increasingly important role in high-speed optical communications, from monolithic transmitters and receivers for advanced optical modulation forma...With progress in fabrication technology, integrated photonics plays an increasingly important role in high-speed optical communications, from monolithic transmitters and receivers for advanced optical modulation formats to on-chip subsystems for optical signal processing. We review our recent work on the highly tailorable physical properties of silicon waveguides for communication and signal processing applications, using slot structures. Controllable chromatic dispersion, nonlinearity, and polarization properties of the waveguides are presented, and the enabled wideband wavelength conversion, optical tunable delay, and signal processing of polarization-multiplexing data channels are discussed.展开更多
With the development of manufacturing technology,the propagation loss of the planar waveguide is getting lower and lower,and the shot-noise-limited sensitivity of an HOG will be greatly improved.When the propagation l...With the development of manufacturing technology,the propagation loss of the planar waveguide is getting lower and lower,and the shot-noise-limited sensitivity of an HOG will be greatly improved.When the propagation loss is getting lower,improper coupling-out waveguide in the waveguide coil may lead to non-ignorable bending loss and crosstalk because of the small radius of curvature and X-junction.In this paper,different couplingout waveguides have been designed.After calculation and optimization by the beam propagation method,we found the proper coupling-out waveguide having relatively low propagation loss,which can improve the sensitivity of the HOG.展开更多
文摘Based on the polynomial interpolation, a new finite difference （FD） method in solving the full-vectorial guidedmodes for step-index optical waveguides is proposed. The discontinuities of the normal components of the electric field across abrupt dielectric interfaces are considered in the absence of the limitations of scalar and semivectorial approximation, and the present PD scheme can be applied to both uniform and non-uniform mesh grids. The modal propagation constants and field distributions for buried rectangular waveguides and optical rib waveguides are presented. The hybrid nature of the vectorial modes is demonstrated and the singular behaviours of the minor field components in the corners are observed. Moreover, solutions are in good agreement with those published early, which tests the validity of the present approach.
文摘A Lithium niobate （LiNbO3） based integrated optical E-field sensor with an optical waveguide Mach-Zehnder interferometer （MZI） and a tapered antenna has been designed and fabricated for the measurement of the pulsed electric field. The minimum detectable E-field of the sensor was 10kV/m. The sensor showed a good linear characteristic while the input E-fields varied from 10kV/m to 370kV/m. Furthermore, the maximum detectable E-field of the sensor, which could be calculated from the sensor input/output characteristic, was approximately equal to 1000kV/m. All these results suggest that such sensor can be used for the measurement of the lighting impulse electric field.
文摘We propose and fabricate a vertically integrated thermo-optic waveguide switch. It controls the optical path between two vertically stacked waveguides using the thermo-optic effect of optical polymer. The measured crosstalk is less than -10 dB.
基金supported by the Natural Science Foundation of Jiangsu Province(Nos.BK20140246 and BK20160417)the National Natural Science Foundation of China(No.61371057,61601251,11404092,and61701261)+1 种基金the China Postdoctoral Science Foundation Funded Project(No.2016M601586)the Fundamental Research Funds for the Central Universities(No.2017B14914)
文摘We report experimental realization of Raman spectra enhancement of copper phthalocyanine, using an on-chip metallic planar waveguide of the sub-millimeter scale. The oscillating ultrahigh order modes excited by the direct coupling method yield high optical intensity at resonance, which is different from the conventional strategy to create localized ＂hot spots.＂ The observed excitation efficiency of the Raman signal is significantly enhanced,owing to the high Q factor of the resonant cavity. Furthermore, effective modulation of the Raman intensity is available by adjusting the polymethyl methacrylate（PMMA） thickness in the guiding layer, i.e., by tuning the light–matter interaction length. A large modulation depth is verified through the fact that 10 times variation in the enhancement factor is observed in the experiment as the PMMA thickness varies from 7 to 23 μm.
文摘Efficient coupling from the silicon waveguide to the GeSi layer is the key to success in the GeSi electro-absorption （EA） modulator based on evanescent coupling. A lateral taper in the upper GeSi layer has room for increasing the modulating efficiency and alleviating the sensitivity of the extinction ratio （ER） and insertion loss （IL） to the length of the active region. The light behavior and the effect of the taper are explored in detail using the beam propagation method （BPM）. After optimization, the light can nearly be totally confined in the GeSi layer without any oscillation. The modulator with the designed taper can achieve low IL and high ER.
基金research work sponsored by DARPA (under contract number HR0011-09-C-0124)and HP Laboratories
文摘With progress in fabrication technology, integrated photonics plays an increasingly important role in high-speed optical communications, from monolithic transmitters and receivers for advanced optical modulation formats to on-chip subsystems for optical signal processing. We review our recent work on the highly tailorable physical properties of silicon waveguides for communication and signal processing applications, using slot structures. Controllable chromatic dispersion, nonlinearity, and polarization properties of the waveguides are presented, and the enabled wideband wavelength conversion, optical tunable delay, and signal processing of polarization-multiplexing data channels are discussed.
基金Project supported by the National Natural Science Foundation of China(Nos.61274066,61504138,61474115)the National Key Research and Development Program of China(No.2016YFA02005003)
文摘With the development of manufacturing technology,the propagation loss of the planar waveguide is getting lower and lower,and the shot-noise-limited sensitivity of an HOG will be greatly improved.When the propagation loss is getting lower,improper coupling-out waveguide in the waveguide coil may lead to non-ignorable bending loss and crosstalk because of the small radius of curvature and X-junction.In this paper,different couplingout waveguides have been designed.After calculation and optimization by the beam propagation method,we found the proper coupling-out waveguide having relatively low propagation loss,which can improve the sensitivity of the HOG.
