The controllable optical mirror is experimentally accomplished in a A-type three-level atomic system coupled with standing wave. It is shown that the reflection of probe light results from electromagnetically-induced-...The controllable optical mirror is experimentally accomplished in a A-type three-level atomic system coupled with standing wave. It is shown that the reflection of probe light results from electromagnetically-induced-transparency-based four-wave mixing, therefore the reflection efficiency is highly dependent on the angle for phase matching condition between the probe and coupling fields. The measured reflection spectra show good agreement with dispersion compensation theory.展开更多
The large aperture optical mirror for space is processed and tested in the gravity environment on the ground. After entering space, gravity disappears due to the change of environment, and the mirror surface that has ...The large aperture optical mirror for space is processed and tested in the gravity environment on the ground. After entering space, gravity disappears due to the change of environment, and the mirror surface that has met the engineering requirements on the ground will change, seriously affecting the imaging quality. In order to eliminate the influence of gravity and to ensure the consistency of space and ground, gravity unloading must be performed. In order to meet the requirements of processing and testing for the large aperture space mirror in the state of vertical optical axis, a universal gravity unloading device was proposed. It was an active support and used air cylinders to provide accurate unloading force. First, the design flow of gravity unloading was introduced;then the detailed design of the mechanical structure and control system was given;then the performance parameters of the two types of cylinders were tested and compared, including the force-pressure relationship curve and the force-position relationship curve;finally, the experimental verification of the gravity unloading device was carried out;for a mirror with an aperture of ?2100 mm, the gravity unloading device was designed and a vertical detection optical path was built. The test results showed that by using this gravity unloading device, the actual processing surface accuracy of the mirror was better than 1/50λ-RMS, which met the application requirement of the optical system. Thus, it can be seen that using this gravity unloading device can effectively unload the gravity of the mirror and realize the accurate processing and measurement of the mirror surface. .展开更多
A new structure for efficient and cost-effective L-band amplified spontaneous emission (ASE) generation was experimentally investigated and demonstrated using a C/L-band coupler, an optical mirror, and a fiber Bragg g...A new structure for efficient and cost-effective L-band amplified spontaneous emission (ASE) generation was experimentally investigated and demonstrated using a C/L-band coupler, an optical mirror, and a fiber Bragg grating (FBG). The proposed structure has about 1.5 dB increase of the power around 1570 nm compared with conventional one. Various structures for power enhancement were also considered.展开更多
We report on a wide-band and stable mode-locked all-polarization-maintaining fiber laser configuration using a nonlinear optical loop mirror. The central wavelength of the laser is 1080.14nm and the 3dB bandwidth is 2...We report on a wide-band and stable mode-locked all-polarization-maintaining fiber laser configuration using a nonlinear optical loop mirror. The central wavelength of the laser is 1080.14nm and the 3dB bandwidth is 20.29nm. The repetition rate of the pulse is 3.28 MHz and the pulse width is 848ps. By tuning the pump power, which is centered at 980nrn, from 300mW to 380mW, we obtain a linearly changed output power from 6row to 7.12roW. The all-polarization-mMntaining fiber configuration is fundamental to the stability of the output power.展开更多
The time delay（TD） of femtoseeond pulses is studied for the first time, which generated from the nonlinear optical loop mirror composed of dispersion decreasing fiber（DDF-NOLM）. The results show that the higher-or...The time delay（TD） of femtoseeond pulses is studied for the first time, which generated from the nonlinear optical loop mirror composed of dispersion decreasing fiber（DDF-NOLM）. The results show that the higher-order dispersion and high order nonlinearities such as Raman frequency shift play a key role in producing TD, and that the time delay ean be suppressed by the third-order dispersion（TOD） in DDF-NOLM. The mechanism of the time delay suppression is also discussed in detail.展开更多
We experimentally discussed the output characteristics of a passively mode-locked erbium-doped fiber laser using a single-mode fiber(SMF)structure as a saturable absorber(SA)based on nonlinear optic loop mirror(NOLM)....We experimentally discussed the output characteristics of a passively mode-locked erbium-doped fiber laser using a single-mode fiber(SMF)structure as a saturable absorber(SA)based on nonlinear optic loop mirror(NOLM).The NOLM acting as an SA has properties of controllable pulse interval and pulse width.Four different types of NOLMs are experimentally discussed and the results show that fine adjustment to the coupler ratio together with optimization of the SMF length inside the NOLM can simultaneously implement high pulse energy and pulse internal tunability.The laser configuration provides a method to generate well-performing mode-locked lasing,and the investigations of the effects of changing some parameters of the laser also provide some help for the development of mode-locked fiber laser based on NOLM.展开更多
We report a Tm-doped noise-like mode-locked(NLML)pulsed fiber laser with a compact linear cavity which consists of dual nonlinear optical loop mirrors(NOLMs).The design of dual-NOLM shows both exceptional compactness ...We report a Tm-doped noise-like mode-locked(NLML)pulsed fiber laser with a compact linear cavity which consists of dual nonlinear optical loop mirrors(NOLMs).The design of dual-NOLM shows both exceptional compactness in construction and distinct flexibility.In this laser,mode-locking can be realized through the nonlinear optical loop mirror technique.Stable noise-like mode-locked pulses with spectral bandwidth of 29.18 nm and pulse energy of 46 nJ are generated at a central wavelength of 1999.7 nm.Our results indicate that such a simple and inexpensive structure can pave the way for the development of generating supercontinuum with desirable performance.展开更多
We study the feasibility of endoscopic optical Doppler tomography with a micro-electro-mechanical system(MEMS) mirror based probe. The additional phase shifts introduced by the probe are tracked and formulated.The sup...We study the feasibility of endoscopic optical Doppler tomography with a micro-electro-mechanical system(MEMS) mirror based probe. The additional phase shifts introduced by the probe are tracked and formulated.The suppression method of the probe phase shifts is proposed and validated by fluid flow detection experiments.In vivo blood flow detection is also implemented on a hairless mouse. The velocities of the blood flow in two directions are obtained to be-8.1 mm/s and 6.6 mm/s, respectively.展开更多
We report on the performance improvement of long-wave infrared quantum cascade lasers(LWIR QCLs)by studying and optimizing the anti-reflection(AR)optical facet coating.Compared to the Al2O3 AR coat⁃ing,the Y_(2)O_(3)A...We report on the performance improvement of long-wave infrared quantum cascade lasers(LWIR QCLs)by studying and optimizing the anti-reflection(AR)optical facet coating.Compared to the Al2O3 AR coat⁃ing,the Y_(2)O_(3)AR coating exhibits higher catastrophic optical mirror damage(COMD)level,and the optical facet coatings of both material systems have no beam steering effect.A 3-mm-long,9.5-μm-wide buried-heterostruc⁃ture(BH)LWIR QCL ofλ~8.5μm with Y_(2)O_(3)metallic high-reflection(HR)and AR of~0.2%reflectivity coating demonstrates a maximum pulsed peak power of 2.19 W at 298 K,which is 149%higher than that of the uncoated device.For continuous-wave(CW)operation,by optimizing the reflectivity of the Y_(2)O_(3)AR coating,the maximum output power reaches 0.73 W,which is 91%higher than that of the uncoated device.展开更多
A numerical model is presented to simulate the influence function of de- formable mirror actuators. The numerical model is formed by Bessel Fourier orthog- onal functions, which are constituted of Bessel orthogonal fu...A numerical model is presented to simulate the influence function of de- formable mirror actuators. The numerical model is formed by Bessel Fourier orthog- onal functions, which are constituted of Bessel orthogonal functions and a Fourier basis. A detailed comparison is presented between the new Bessel Fourier model, the Zernike model, the Gaussian influence function and the modified Gaussian influence function. Numerical experiments indicate that the new numerical model is easy to use and more accurate compared with other numerical models. The new numerical model can be used for describing deformable mirror performances and numerical simulations of adaptive optics systems.展开更多
A magnetic fluid based deformable mirror(MFDM) that could produce a large stroke more than 100 μm is designed and demonstrated experimentally with respect to the characteristics of the aberration of the liquid telesc...A magnetic fluid based deformable mirror(MFDM) that could produce a large stroke more than 100 μm is designed and demonstrated experimentally with respect to the characteristics of the aberration of the liquid telescope. Its aberration correction performance is verified by the co-simulation using COMSOL and MATLAB. Furthermore, the stroke performance of the MFDM and the decentralized linear quadratic Gaussian(LQG) mirror surface control approach are experimentally evaluated with a prototype of MFDM in an adaptive optics system to show its potential application for the large aberration correction of liquid telescopes.展开更多
In this Letter, we report on a novel architecture for a self-starting mode-locked figure-eight erbium-doped fiber laser using a loss-imbalanced nonlinear optical loop mirror(NOLM) with a bidirectional output coupler. ...In this Letter, we report on a novel architecture for a self-starting mode-locked figure-eight erbium-doped fiber laser using a loss-imbalanced nonlinear optical loop mirror(NOLM) with a bidirectional output coupler. An allpolarization-maintaining structure is adopted. A 2 × 2 optical coupler with a splitting ratio of 50:50 is used at the junction to form an NOLM. Another coupler with a splitting ratio of 10:90 is introduced at one end of the fiber loop. The 10:90 coupler plays two roles: power attenuator and bidirectional output coupler. This architecture can achieve both large modulation depth and good self-starting ability simultaneously. With this architecture,the self-starting mode-locking operation is achieved easily with pump power above the threshold. The clockwise and counter-clockwise mode-locked output powers are 10.1 and 10.3 mW, respectively, with the repetition rate of 3.63 MHz. The spectral bandwidths of the clockwise and counter-clockwise mode-locked output pulses are 7.4 and 2.9 nm, and the corresponding pulse widths of the direct outputs are 530.6 fs and 1.55 ps, respectively.展开更多
Since laser intensity plays an important role in laser plasma interactions,a method of increasing laser intensity- focusing of an intense laser via a parabolic plasma concave surface- is proposed and investigated by t...Since laser intensity plays an important role in laser plasma interactions,a method of increasing laser intensity- focusing of an intense laser via a parabolic plasma concave surface- is proposed and investigated by three-dimensional particle-in-cell simulations.The geometric focusing via a parabolic concave surface and the temporal compression of high harmonics increased the peak intensity of the laser pulse by about two orders of magnitude.Compared with the improvement via laser optics approaches,this scheme is much more economic and appropriate for most femtosecond laser facilities.展开更多
A bimorph deformable mirror （DM） with a large stroke of more than 30 μm using 35 actuators is presented and characterized for an adaptive optics （AO） confocal scanning laser ophthalmoscope application. Facilitate...A bimorph deformable mirror （DM） with a large stroke of more than 30 μm using 35 actuators is presented and characterized for an adaptive optics （AO） confocal scanning laser ophthalmoscope application. Facilitated with a Shack-Hartmann wavefront sensor, the bimorph DM-based AO operates closed-loop AO corrections for hu- man eyes and reduces wavefront aberrations in most eyes to below 0.1 μm rms. Results from living eyes, including one exhibiting ~5D of myopia and ~2D of astigmatism along with notable high-order aberrations, reveal a prac- tical efficient aberration correction and demonstrate a great benefit for retina imaging, including improving resolution, increasing brightness, and enhancing the contrast of images.展开更多
In this Letter,we propose an on-line inspection method based on a plenoptic camera to detect and locate flaws of optics.Specifically,due to the extended depth of field of the plenoptic camera,a series of optics can be...In this Letter,we propose an on-line inspection method based on a plenoptic camera to detect and locate flaws of optics.Specifically,due to the extended depth of field of the plenoptic camera,a series of optics can be inspected efficiently and simultaneously.Moreover,the depth estimation capability of the plenoptic camera allows for locating flaws while detecting them.Besides,the detection and location can be implemented with a single snapshot of the plenoptic camera.Consequently,this method provides us with the opportunity to reduce the cost of time and labor of inspection and remove the flaw optics,which may lead to performance degradation of optical systems.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.61308121 and 11274210)the National Basic Research Program of China(Grant Nos.2010CB923102 and 2011CB922203)
文摘The controllable optical mirror is experimentally accomplished in a A-type three-level atomic system coupled with standing wave. It is shown that the reflection of probe light results from electromagnetically-induced-transparency-based four-wave mixing, therefore the reflection efficiency is highly dependent on the angle for phase matching condition between the probe and coupling fields. The measured reflection spectra show good agreement with dispersion compensation theory.
文摘The large aperture optical mirror for space is processed and tested in the gravity environment on the ground. After entering space, gravity disappears due to the change of environment, and the mirror surface that has met the engineering requirements on the ground will change, seriously affecting the imaging quality. In order to eliminate the influence of gravity and to ensure the consistency of space and ground, gravity unloading must be performed. In order to meet the requirements of processing and testing for the large aperture space mirror in the state of vertical optical axis, a universal gravity unloading device was proposed. It was an active support and used air cylinders to provide accurate unloading force. First, the design flow of gravity unloading was introduced;then the detailed design of the mechanical structure and control system was given;then the performance parameters of the two types of cylinders were tested and compared, including the force-pressure relationship curve and the force-position relationship curve;finally, the experimental verification of the gravity unloading device was carried out;for a mirror with an aperture of ?2100 mm, the gravity unloading device was designed and a vertical detection optical path was built. The test results showed that by using this gravity unloading device, the actual processing surface accuracy of the mirror was better than 1/50λ-RMS, which met the application requirement of the optical system. Thus, it can be seen that using this gravity unloading device can effectively unload the gravity of the mirror and realize the accurate processing and measurement of the mirror surface. .
文摘A new structure for efficient and cost-effective L-band amplified spontaneous emission (ASE) generation was experimentally investigated and demonstrated using a C/L-band coupler, an optical mirror, and a fiber Bragg grating (FBG). The proposed structure has about 1.5 dB increase of the power around 1570 nm compared with conventional one. Various structures for power enhancement were also considered.
文摘We report on a wide-band and stable mode-locked all-polarization-maintaining fiber laser configuration using a nonlinear optical loop mirror. The central wavelength of the laser is 1080.14nm and the 3dB bandwidth is 20.29nm. The repetition rate of the pulse is 3.28 MHz and the pulse width is 848ps. By tuning the pump power, which is centered at 980nrn, from 300mW to 380mW, we obtain a linearly changed output power from 6row to 7.12roW. The all-polarization-mMntaining fiber configuration is fundamental to the stability of the output power.
文摘The time delay（TD） of femtoseeond pulses is studied for the first time, which generated from the nonlinear optical loop mirror composed of dispersion decreasing fiber（DDF-NOLM）. The results show that the higher-order dispersion and high order nonlinearities such as Raman frequency shift play a key role in producing TD, and that the time delay ean be suppressed by the third-order dispersion（TOD） in DDF-NOLM. The mechanism of the time delay suppression is also discussed in detail.
基金supported in part by the Zhejiang Province Science and Technology Plan Projects(No.LGG19F050001)the National Natural Science Foundation of China(No.601705055)the Zhejiang Provincial Natural Science Foundation of China(No.LY17F050012)。
文摘We experimentally discussed the output characteristics of a passively mode-locked erbium-doped fiber laser using a single-mode fiber(SMF)structure as a saturable absorber(SA)based on nonlinear optic loop mirror(NOLM).The NOLM acting as an SA has properties of controllable pulse interval and pulse width.Four different types of NOLMs are experimentally discussed and the results show that fine adjustment to the coupler ratio together with optimization of the SMF length inside the NOLM can simultaneously implement high pulse energy and pulse internal tunability.The laser configuration provides a method to generate well-performing mode-locked lasing,and the investigations of the effects of changing some parameters of the laser also provide some help for the development of mode-locked fiber laser based on NOLM.
基金supported by the Nature Science Foundation of Chongqing(No.cstc2018jcyjAX0585)。
文摘We report a Tm-doped noise-like mode-locked(NLML)pulsed fiber laser with a compact linear cavity which consists of dual nonlinear optical loop mirrors(NOLMs).The design of dual-NOLM shows both exceptional compactness in construction and distinct flexibility.In this laser,mode-locking can be realized through the nonlinear optical loop mirror technique.Stable noise-like mode-locked pulses with spectral bandwidth of 29.18 nm and pulse energy of 46 nJ are generated at a central wavelength of 1999.7 nm.Our results indicate that such a simple and inexpensive structure can pave the way for the development of generating supercontinuum with desirable performance.
基金Supported by the National Natural Science Foundation of China under Grant No 61705199the Natural Science Foundation of Henan Province under Grant No 162300410317+2 种基金the Henan Science and Technology Project under Grant Nos 162102310576and 172102210542the Zhengzhou Science and Technology Project under Grant No 153PKJGG125the US National Science Foundation under Grant No 1002209
文摘We study the feasibility of endoscopic optical Doppler tomography with a micro-electro-mechanical system(MEMS) mirror based probe. The additional phase shifts introduced by the probe are tracked and formulated.The suppression method of the probe phase shifts is proposed and validated by fluid flow detection experiments.In vivo blood flow detection is also implemented on a hairless mouse. The velocities of the blood flow in two directions are obtained to be-8.1 mm/s and 6.6 mm/s, respectively.
基金Supported by the National Natural Science Foundation of China(12393830)。
文摘We report on the performance improvement of long-wave infrared quantum cascade lasers(LWIR QCLs)by studying and optimizing the anti-reflection(AR)optical facet coating.Compared to the Al2O3 AR coat⁃ing,the Y_(2)O_(3)AR coating exhibits higher catastrophic optical mirror damage(COMD)level,and the optical facet coatings of both material systems have no beam steering effect.A 3-mm-long,9.5-μm-wide buried-heterostruc⁃ture(BH)LWIR QCL ofλ~8.5μm with Y_(2)O_(3)metallic high-reflection(HR)and AR of~0.2%reflectivity coating demonstrates a maximum pulsed peak power of 2.19 W at 298 K,which is 149%higher than that of the uncoated device.For continuous-wave(CW)operation,by optimizing the reflectivity of the Y_(2)O_(3)AR coating,the maximum output power reaches 0.73 W,which is 91%higher than that of the uncoated device.
基金supported by the Opening Project of the Key Laboratory of Astronomical Optics and Technology, Nanjing Institute of Astronomical Optics and Technology, Chinese Academy of Sciences (No. CAS-KLAOT-KF201206)
文摘A numerical model is presented to simulate the influence function of de- formable mirror actuators. The numerical model is formed by Bessel Fourier orthog- onal functions, which are constituted of Bessel orthogonal functions and a Fourier basis. A detailed comparison is presented between the new Bessel Fourier model, the Zernike model, the Gaussian influence function and the modified Gaussian influence function. Numerical experiments indicate that the new numerical model is easy to use and more accurate compared with other numerical models. The new numerical model can be used for describing deformable mirror performances and numerical simulations of adaptive optics systems.
基金supported by the National Natural Science Foundation of China(No.51675321)the Shanghai Municipal Natural Science Foundation(No.15ZR1415800)the Innovation Program of Shanghai Municipal Education Commission(No.14ZZ092)
文摘A magnetic fluid based deformable mirror(MFDM) that could produce a large stroke more than 100 μm is designed and demonstrated experimentally with respect to the characteristics of the aberration of the liquid telescope. Its aberration correction performance is verified by the co-simulation using COMSOL and MATLAB. Furthermore, the stroke performance of the MFDM and the decentralized linear quadratic Gaussian(LQG) mirror surface control approach are experimentally evaluated with a prototype of MFDM in an adaptive optics system to show its potential application for the large aberration correction of liquid telescopes.
基金supported by the Key Project of Bureau of International Cooperation,Chinese Academy of Sciences(No.181811KYSB20160029)the Key Research Project of Bureau of Frontier Sciences and Education,Chinese Academy of Sciences(No.QYZDY-SSWJSC008)
文摘In this Letter, we report on a novel architecture for a self-starting mode-locked figure-eight erbium-doped fiber laser using a loss-imbalanced nonlinear optical loop mirror(NOLM) with a bidirectional output coupler. An allpolarization-maintaining structure is adopted. A 2 × 2 optical coupler with a splitting ratio of 50:50 is used at the junction to form an NOLM. Another coupler with a splitting ratio of 10:90 is introduced at one end of the fiber loop. The 10:90 coupler plays two roles: power attenuator and bidirectional output coupler. This architecture can achieve both large modulation depth and good self-starting ability simultaneously. With this architecture,the self-starting mode-locking operation is achieved easily with pump power above the threshold. The clockwise and counter-clockwise mode-locked output powers are 10.1 and 10.3 mW, respectively, with the repetition rate of 3.63 MHz. The spectral bandwidths of the clockwise and counter-clockwise mode-locked output pulses are 7.4 and 2.9 nm, and the corresponding pulse widths of the direct outputs are 530.6 fs and 1.55 ps, respectively.
基金supported by National Natural Science Foundation of China(Nos.11174259,11175165)the Dual Hundred Foundation of China Academy of Engineering Physics
文摘Since laser intensity plays an important role in laser plasma interactions,a method of increasing laser intensity- focusing of an intense laser via a parabolic plasma concave surface- is proposed and investigated by three-dimensional particle-in-cell simulations.The geometric focusing via a parabolic concave surface and the temporal compression of high harmonics increased the peak intensity of the laser pulse by about two orders of magnitude.Compared with the improvement via laser optics approaches,this scheme is much more economic and appropriate for most femtosecond laser facilities.
基金supported by the National Science Foundation of China(No.61605210)the National Instrumentation Program(NIP)(No.2012YQ120080)+4 种基金the National Key Research and Development Program of China(No.2016YFC0102500)the Jiangsu Province Science Fund for Distinguished Young Scholars(No.BK20060010)the Frontier Science Research Project of the Chinese Academy of Sciences(No.QYZDB-SSWJSC03)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB02060000)the Zhejiang Province Technology Program(No.2013C33170)
文摘A bimorph deformable mirror （DM） with a large stroke of more than 30 μm using 35 actuators is presented and characterized for an adaptive optics （AO） confocal scanning laser ophthalmoscope application. Facilitated with a Shack-Hartmann wavefront sensor, the bimorph DM-based AO operates closed-loop AO corrections for hu- man eyes and reduces wavefront aberrations in most eyes to below 0.1 μm rms. Results from living eyes, including one exhibiting ~5D of myopia and ~2D of astigmatism along with notable high-order aberrations, reveal a prac- tical efficient aberration correction and demonstrate a great benefit for retina imaging, including improving resolution, increasing brightness, and enhancing the contrast of images.
基金supported by the Key Scientific Equipment Develop Project of China(No.ZDYZ20132)the National“863”Program of China(Nos.G158603 and G158201)
文摘In this Letter,we propose an on-line inspection method based on a plenoptic camera to detect and locate flaws of optics.Specifically,due to the extended depth of field of the plenoptic camera,a series of optics can be inspected efficiently and simultaneously.Moreover,the depth estimation capability of the plenoptic camera allows for locating flaws while detecting them.Besides,the detection and location can be implemented with a single snapshot of the plenoptic camera.Consequently,this method provides us with the opportunity to reduce the cost of time and labor of inspection and remove the flaw optics,which may lead to performance degradation of optical systems.
