Our concern is to investigate controlled remote implementation of partially unknown operations with multiple layers.We first propose a scheme to realize the remote implementation of singlequbit operations belonging to...Our concern is to investigate controlled remote implementation of partially unknown operations with multiple layers.We first propose a scheme to realize the remote implementation of singlequbit operations belonging to the restricted sets.Then,the proposed scheme is extended to the case of single-qudit operations.As long as the controller and the higher-layer senders consent,the receiver can restore the desired state remotely operated by the sender.It is worth mentioning that the recovery operation is deduced by general formulas which clearly reveal the relationship with the measurement outcomes.For the sake of clarity,two specific examples with two levels are given respectively.In addition,we discuss the influence of amplitude-damping noise and utilize weak measurement and measurement reversal to effectively resist noise.展开更多
We consider the microgrid operation control technology including design of microgrid operation control system,MG control device and control strategy.We pay much attention on microgrid operation control device which is...We consider the microgrid operation control technology including design of microgrid operation control system,MG control device and control strategy.We pay much attention on microgrid operation control device which is core control device.In order to solve the contradiction of quick speed about microgrid operation mode shift and slow speed about the management system,threelayers control architecture based on IEC61850 is designed and adaptive control strategy is used on MG operation control system.The system has been applied in a distributed generation/energy storage power station.The actual operation shows that the system can be effectively and flexibly connected to distribution network.展开更多
Based on analyzing the thermal process of a CDQ （coke dry quenching）-Boiler system, the mathematical model for opti-mized operation and control in the CDQ-Boiler system was developed. It includes a mathematical mode...Based on analyzing the thermal process of a CDQ （coke dry quenching）-Boiler system, the mathematical model for opti-mized operation and control in the CDQ-Boiler system was developed. It includes a mathematical model for heat transferring process in the CDQ unit, a mathematical model for heat transferring process in the boiler and a combustion model for circulating gas in the CDQ-Boiler system. The model was verified by field data, then a series of simulations under several typical operating conditions of CDQ-Boiler were carried on, and in turn, the online relation formulas between the productivity and the optimal circulating gas, and the one between the productivity and the optimal second air, were achieved respectively. These relation equations have been success- fully used in a CDQ-Boiler computer control system in the Baosteel, to realize online optimized guide and control, and meanwhile high efficiency in the CDQ-Boiler system has been achieved.展开更多
This paper describes the control software together with the operational hardware, which successfully realizes the operation of a new fully programmable imaging system with high spatial and temporal resolutions on the ...This paper describes the control software together with the operational hardware, which successfully realizes the operation of a new fully programmable imaging system with high spatial and temporal resolutions on the KT5D magnetic torus, for observing the visible l ight emission from the plasma discharge.展开更多
The contradiction between the increasing material demand and resource,is the country has faced problems,to better solve the material demand and the contradiction between the environment and resources,is applied to the...The contradiction between the increasing material demand and resource,is the country has faced problems,to better solve the material demand and the contradiction between the environment and resources,is applied to the development of new energy,new energy,not only can alleviate people and resources,environment and resources,the contradiction between people and the environment,also can promote the sustainable development of world economy,HVAC technology has emerged a new generation of energysaving technology,HVAC has the characteristics of low consumption,low pollution,is a development of technology,to be promoted for environmentfriendly,resource-conserving society has an important role in promoting.This paper focuses on the HVAC technology,water source heat pump system operation control and energy consumption optimization,for the relevant personnel reference.展开更多
At the beginning of 1990s, Shougang blast furnaces （BFs） No. 2, No. 4, No. 3 and No. 1 were rebuilt se quently for new technological modernization in succession. The campaign life of BFs No. 1, No. 3 and No. 4 reach...At the beginning of 1990s, Shougang blast furnaces （BFs） No. 2, No. 4, No. 3 and No. 1 were rebuilt se quently for new technological modernization in succession. The campaign life of BFs No. 1, No. 3 and No. 4 reaches 16.4, 17.6 and 15.6 years, respectively, and the hot metal output of one campaign reaches 33.8, 35.48 and 26.37 Mt, respectively; the hot metal output of BF effective volume of one campaign reaches 13328, 13991 and 12560 t/m^3, respectively, which reaches the international advanced level of BF high efficiency and long campaign life. In BF desig-ning, several advanced BF long campaign technologies were adopted. BF proper inner profile was optimized, reasona- ble inner profile was adopted, and closed circulating soften water cooling technology was applied in 4 BFs. Double row cooling pipe high efficiency cooling stave was developed which could prolong the service life of bosh, belly and stack. Hot pressed carbon brick and ceramic cup hearth lining structure were applied and optimized. BF operation was improved continuously to ensure stable and smooth operation of BF. Hearth working condition control was strengthened, burden distribution control technology was applied to achieve reasonable distribution of gas flow, and heat load monitoring was strengthened to maintain BF reasonable working inner profile. Proper maintenance at the end of BF campaign was enhanced. Hearth and bottom service life was prolonged by adding titaniferous material and enhancing hearth cooling. Gunning of lining was carried out periodically for the area above tuyere zone.展开更多
A dual isolation problem for rotating machines consists of isolation of housing structures from the machine vibrations and protection of machines during an earthquake to maintain their functionality. Desirable charact...A dual isolation problem for rotating machines consists of isolation of housing structures from the machine vibrations and protection of machines during an earthquake to maintain their functionality. Desirable characteristics of machine mounts for the above two purposes can differ significantly due to difference in nature of the excitation and performance criteria in the two situations. In this paper, relevant response quantities are identified that may be used to quantify performance and simplified models of rotating machines are presented using which these relevant response quantities may be calculated. Using random vibration approach with a stationary excitation, it is shown that significant improvement in seismic performance is achievable by proper mount design. Results of shaking table experiments performed with a realistic setup using a centrifugal pump are presented. It is concluded that a solution to this dual isolation problem lies in a semi-active mount capable switching its properties from ‘operation-optimum’ to ‘seismic-optimum’ at the onset of a seismic event.展开更多
Cold storage technology is useful to alleviate the mismatch between the cold energy demand and supply.The integration of cold energy storage in cooling system is an effective approach to improve the system reliability...Cold storage technology is useful to alleviate the mismatch between the cold energy demand and supply.The integration of cold energy storage in cooling system is an effective approach to improve the system reliability and performance.This review provides an overview and recent advances of the cold thermal energy storage(CTES)in refrigeration cooling systems and discusses the operation control for system optimization.Firstly,the composition and principles of cooling systems coupled with CTES are presented.Special attention was paid to cold storage medium of phase change material(PCM)with high energy density and stable phase change temperature.Then,based on the classification of driven energy,the different applications of passive or active cooling systems with CTES are classified,including building cooling,cold chain logistics,and other refrigeration systems.Most importantly,the operation control which is necessary to performance optimization is presented,including operational control strategies,cold load predictions,and economic evaluation methods.Three types of operational control strategies are summarised using water storage and cooling system as an example.Two types of cold load predictions,parametric regression and artificial neural network method,are introduced.Three aspects of economic costs are summarized in terms of initial equipment investment cost,operational cost,and life-cycle cost are summarized.Finally,an outlook on the development of cooling systems using CTES is given.展开更多
A novel operation control method for relay protection in flexible DC distribution networks with distributed power supply is proposed to address the issue of inaccurate fault location during relay protection,leading to...A novel operation control method for relay protection in flexible DC distribution networks with distributed power supply is proposed to address the issue of inaccurate fault location during relay protection,leading to poor performance.The method combines a fault-tolerant fault location method based on long-term and short-term memory networks to accurately locate the fault section.Then,an operation control method for relay protection based on adaptive weight and whale optimization algorithm(WOA)is used to construct an objective function considering the shortest relay protection action time and the smallest impulse current.The adaptive weight and WOA are employed to obtain the optimal strategy for relay protection operation control,reducing the action time and impulse current.Experimental results demonstrate the effectiveness of the proposed method in accurately locating faults and improving relay protection performance.The longest operation time is reduced by 4.7023 s,and the maximum impulse current is limited to 0.3 A,effectively controlling the impact of large impulse currents and enhancing control efficiency.展开更多
A series-parallel hydraulic hybrid system applied to public buses is put torwaro, ano parameters of key components are analyzed and determined. Energy management strategy based on logic thresh- old is designed which i...A series-parallel hydraulic hybrid system applied to public buses is put torwaro, ano parameters of key components are analyzed and determined. Energy management strategy based on logic thresh- old is designed which is aimed at efficient operation of the overall system considering the operational characteristic of the components and taking the curves of engine, hydraulic pump/motor and hydrau- lic pump as the main design basis; regenerative control strategy which makes regenerative brake sys- tem and frictional brake system work harmoniously is designed to raise recovery rate of regenerative brake energy. System dynamic modeling and simulation results show that the energy control strategy designed here is able to adapt system to changes of working condition and switch the operating mode reasonably. The regenerative braking control strategy is effective in raising the utilization of energy and improving fuel economy.展开更多
The controlled volume method of operation is especially suitable for large-scale water delivery canal system with complex operation requirements. An operating simulation model based on the storage volume control metho...The controlled volume method of operation is especially suitable for large-scale water delivery canal system with complex operation requirements. An operating simulation model based on the storage volume control method for multi-reach canal system in series was established. In allusion to the deficiency of existing controlled volume algorithm, the improved controlled volume algorithm of the whole canal pools was proposed, and the simulation results indicated that the storage volume and water level of each canal pool could be accurately controlled after the improved algorithm had been adopted. However, for some typical discharge demand operating conditions, if the previously mentioned algorithm was adopted, then it certainly would cause some unnecessary gate adjustments, and consequently the disturbed canal pools would be increased. Therefore, the idea of controlled volume operation method of continuous canal pools was proposed, and corresponding algorithm was designed. Through simulating practical project, the results indicated that the new controlled volume algorithm proposed for typical operating conditions could comparatively and obviously reduce the number of regulated check gates and disturb canal pools for some typical discharge demand operating conditions, thus the control efficiency of canal system could be improved.展开更多
In this work,the dynamics and operation of the totally reboiled reactive distillation columns are visualized in terms of transfer function based process models.This kind of processes is found to be characterized by un...In this work,the dynamics and operation of the totally reboiled reactive distillation columns are visualized in terms of transfer function based process models.This kind of processes is found to be characterized by underdamped step responses due to the special topological configuration and the intricate interplay between the reaction operation and the separation operation involved.The under-dampness can be substantially alleviated through the tight inventory control of bottom reboiler and this presents beneficial effects to process dynamics and operation.Two totally reboiled reactive distillation columns,separating,respectively,a hypothetical synthesis reaction from reactants A and B to product C,and a real decomposition reaction from 1,4-butanediol to tetrahydrofuran and water,are employed to demonstrate these uncommon behaviors.The results obtained give full support to the above qualitative interpretation.Despite the strong influences of reaction kinetics and thermodynamic properties of the reacting mixtures,the totally reboiled reactive distillation columns are generally considered to present such unique behaviors and require tight inventory control of bottom reboiler to facilitate their control system development.展开更多
In recent years, in the process of low-carbon economy construction in China, the original power generation mode has been changed, and photovoltaic power generation technology has been adopted, which has promoted the r...In recent years, in the process of low-carbon economy construction in China, the original power generation mode has been changed, and photovoltaic power generation technology has been adopted, which has promoted the rapid development of related industries. When constructing a new generation mode, there are high requirements for the application of various equipments. Among them, the generator set belongs to special equipment, which needs to be managed in order to realize the scientific utilization of energy and the protection of surrounding environment. At present, China has gradually expanded the construction scale of related industries, and at the same time introduced more advanced technology, and carried out all-round control on the power generation mode. This paper analyzes and discusses the operation control technology of distributed photovoltaic power generation.展开更多
With the continuous improvement of social and economic level, in order to meet the needs of different production and life at present, chemical processing technology has been applied to all aspects of industrial produc...With the continuous improvement of social and economic level, in order to meet the needs of different production and life at present, chemical processing technology has been applied to all aspects of industrial production. Methanol, as a commonly used material in chemical processing, has a certain history of development in China, but there is still a big gap between it and the world's advanced level. Therefore, from the actual point of view, this paper fully explores the problems existing in the synthesis process and operation technology of methanol, and then puts forward the corresponding solutions.展开更多
In recent years, with the rapid development of society, the demand for electric energy in the production field and life field is increasing, and the power supply quality is directly related to the performance of centr...In recent years, with the rapid development of society, the demand for electric energy in the production field and life field is increasing, and the power supply quality is directly related to the performance of centralized control operation steam turbine in power plant. Once there is an operation problem, it will lead to the reduction of smooth power supply, poor quality, and even affect the production and life of society, damage to the benefits of the power plant. Based on this, the author studies and discusses the centralized control operation of steam turbine, analyzes the existing shortcomings, and puts forward relevant operation optimization measures, in order to lay a solid foundation for improving the power generation quality and production efficiency of power plant.展开更多
One of the key tasks of centralized control operation of thermal power plant is to pre-control dangerous points, which ensures the safety of the whole thermal power plant. Therefore, it is necessary to understand the ...One of the key tasks of centralized control operation of thermal power plant is to pre-control dangerous points, which ensures the safety of the whole thermal power plant. Therefore, it is necessary to understand the main dangerous points and causes of centralized control operation, so as to take effective solutions, implementing preventive pre-control, and ensuring the safety of thermal power plant.展开更多
To promote the high-quality development of public hospitals, to implement standardized and refined management of public hospitals and to achieve quality improvement and efficiency enhancement, operation management and...To promote the high-quality development of public hospitals, to implement standardized and refined management of public hospitals and to achieve quality improvement and efficiency enhancement, operation management and internal control management are the keys. In view of the operation management and internal control management of public hospitals, the state has issued relevant policies and regulations, which set up a high-quality development policy framework and method path for the hospitals. This paper selects three perspectives to think and put forward arguments on how to implement the policies according to the public hospitals' own conditions. Firstly, from the perspective of the relationship between operation and internal control, it discusses how to balance the implementation of operation and internal control, and clarifies that both operation and internal control should be carried out simultaneously;The second is to put forward some opinions on how to carry out the operation and internal control of small public hospitals which are facing more difficulties and challenges in the process of high-quality development, pointing out that they should pay attention to practice and effectiveness;The third is to discuss the relationship between financial management and internal control management of operation management, pointing out that financial management is closely related to both but different from each other. Strengthening financial management can help operation and internal control;At the same time, the difference between operation and internal control and finance should be emphasized so as to pay more attention to and carry out operation and internal control more effectively and provide a stronger impetus for the high-quality development of public hospitals.展开更多
In this paper,a novel train positioning method considering satellite raw observation data was proposed,which aims to promote train positioning performance from an innovative perspective of the train satellite-based po...In this paper,a novel train positioning method considering satellite raw observation data was proposed,which aims to promote train positioning performance from an innovative perspective of the train satellite-based positioning error sources.The method focused on overcoming the abnormal observations in satellite observation data caused by railway environment rather than the positioning results.Specifically,the relative positioning experimental platform was built and the zero-baseline method was firstly employed to evaluate the carrier phase data quality,and then,GNSS combined observation models were adopted to construct the detection values,which were applied to judge abnormal-data through the dual-frequency observations.Further,ambiguity fixing optimization was investigated based on observation data selection in partly-blocked environments.The results show that the proposed method can effectively detect and address abnormal observations and improve positioning stability.Cycle slips and gross errors can be detected and identified based on dual-frequency global navigation satellite system data.After adopting the data selection strategy,the ambiguity fixing percentage was improved by 29.2%,and the standard deviation in the East,North,and Up components was enhanced by 12.7%,7.4%,and 12.5%,respectively.The proposed method can provide references for train positioning performance optimization in railway environments from the perspective of positioning error sources.展开更多
The most prospective method for certain structural failures and damages that cannot employ redundancy is self-repairing techniques, to ensure especially the maximum flight safety. Based on the characters of self-repai...The most prospective method for certain structural failures and damages that cannot employ redundancy is self-repairing techniques, to ensure especially the maximum flight safety. Based on the characters of self-repairing aircraft, this paper states some basic assumptions of the self-repairing aircraft, and puts forward some special new conceptions concerning the self-repairing aircraft: control input, operating input, command input, repair input and operating and control factor as well as their relationships. Thus it provides a simple and reliable mathematical model structure for the research on the self-repairing control of the aircraft.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.62172341,12071132)the Natural Science Foundation of Henan Province of China(Grant No.242300420276)the Joint Fund of Henan Province Science and Technology R&D Program(Grant No.225200810032)。
文摘Our concern is to investigate controlled remote implementation of partially unknown operations with multiple layers.We first propose a scheme to realize the remote implementation of singlequbit operations belonging to the restricted sets.Then,the proposed scheme is extended to the case of single-qudit operations.As long as the controller and the higher-layer senders consent,the receiver can restore the desired state remotely operated by the sender.It is worth mentioning that the recovery operation is deduced by general formulas which clearly reveal the relationship with the measurement outcomes.For the sake of clarity,two specific examples with two levels are given respectively.In addition,we discuss the influence of amplitude-damping noise and utilize weak measurement and measurement reversal to effectively resist noise.
基金This work is supported by National High Technology Research and Development Program of China(863 Program)(No.2011AA05A117).
文摘We consider the microgrid operation control technology including design of microgrid operation control system,MG control device and control strategy.We pay much attention on microgrid operation control device which is core control device.In order to solve the contradiction of quick speed about microgrid operation mode shift and slow speed about the management system,threelayers control architecture based on IEC61850 is designed and adaptive control strategy is used on MG operation control system.The system has been applied in a distributed generation/energy storage power station.The actual operation shows that the system can be effectively and flexibly connected to distribution network.
文摘Based on analyzing the thermal process of a CDQ （coke dry quenching）-Boiler system, the mathematical model for opti-mized operation and control in the CDQ-Boiler system was developed. It includes a mathematical model for heat transferring process in the CDQ unit, a mathematical model for heat transferring process in the boiler and a combustion model for circulating gas in the CDQ-Boiler system. The model was verified by field data, then a series of simulations under several typical operating conditions of CDQ-Boiler were carried on, and in turn, the online relation formulas between the productivity and the optimal circulating gas, and the one between the productivity and the optimal second air, were achieved respectively. These relation equations have been success- fully used in a CDQ-Boiler computer control system in the Baosteel, to realize online optimized guide and control, and meanwhile high efficiency in the CDQ-Boiler system has been achieved.
基金The project supported by Chinese National Science Foundation (Nos. 10335060, 10235010) and Creative Project Grants of ChineseAcademy of Science
文摘This paper describes the control software together with the operational hardware, which successfully realizes the operation of a new fully programmable imaging system with high spatial and temporal resolutions on the KT5D magnetic torus, for observing the visible l ight emission from the plasma discharge.
文摘The contradiction between the increasing material demand and resource,is the country has faced problems,to better solve the material demand and the contradiction between the environment and resources,is applied to the development of new energy,new energy,not only can alleviate people and resources,environment and resources,the contradiction between people and the environment,also can promote the sustainable development of world economy,HVAC technology has emerged a new generation of energysaving technology,HVAC has the characteristics of low consumption,low pollution,is a development of technology,to be promoted for environmentfriendly,resource-conserving society has an important role in promoting.This paper focuses on the HVAC technology,water source heat pump system operation control and energy consumption optimization,for the relevant personnel reference.
文摘At the beginning of 1990s, Shougang blast furnaces （BFs） No. 2, No. 4, No. 3 and No. 1 were rebuilt se quently for new technological modernization in succession. The campaign life of BFs No. 1, No. 3 and No. 4 reaches 16.4, 17.6 and 15.6 years, respectively, and the hot metal output of one campaign reaches 33.8, 35.48 and 26.37 Mt, respectively; the hot metal output of BF effective volume of one campaign reaches 13328, 13991 and 12560 t/m^3, respectively, which reaches the international advanced level of BF high efficiency and long campaign life. In BF desig-ning, several advanced BF long campaign technologies were adopted. BF proper inner profile was optimized, reasona- ble inner profile was adopted, and closed circulating soften water cooling technology was applied in 4 BFs. Double row cooling pipe high efficiency cooling stave was developed which could prolong the service life of bosh, belly and stack. Hot pressed carbon brick and ceramic cup hearth lining structure were applied and optimized. BF operation was improved continuously to ensure stable and smooth operation of BF. Hearth working condition control was strengthened, burden distribution control technology was applied to achieve reasonable distribution of gas flow, and heat load monitoring was strengthened to maintain BF reasonable working inner profile. Proper maintenance at the end of BF campaign was enhanced. Hearth and bottom service life was prolonged by adding titaniferous material and enhancing hearth cooling. Gunning of lining was carried out periodically for the area above tuyere zone.
基金the Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY
文摘A dual isolation problem for rotating machines consists of isolation of housing structures from the machine vibrations and protection of machines during an earthquake to maintain their functionality. Desirable characteristics of machine mounts for the above two purposes can differ significantly due to difference in nature of the excitation and performance criteria in the two situations. In this paper, relevant response quantities are identified that may be used to quantify performance and simplified models of rotating machines are presented using which these relevant response quantities may be calculated. Using random vibration approach with a stationary excitation, it is shown that significant improvement in seismic performance is achievable by proper mount design. Results of shaking table experiments performed with a realistic setup using a centrifugal pump are presented. It is concluded that a solution to this dual isolation problem lies in a semi-active mount capable switching its properties from ‘operation-optimum’ to ‘seismic-optimum’ at the onset of a seismic event.
基金supported by the National Natural Science Foundation of China,China(52274252)the Key Research and Development Program of Hunan Province,China(2022GK2048,2023NK2032)+2 种基金the Special Fund for the Construction of Innovative Province in Hunan Province,China(2022WK4004)the Changsha City Fund for Distinguished and Innovative Young Scholars,China(kq1802007)the Postgraduate Scientific Research Innovation Project in Hunan Province(QL20230217).
文摘Cold storage technology is useful to alleviate the mismatch between the cold energy demand and supply.The integration of cold energy storage in cooling system is an effective approach to improve the system reliability and performance.This review provides an overview and recent advances of the cold thermal energy storage(CTES)in refrigeration cooling systems and discusses the operation control for system optimization.Firstly,the composition and principles of cooling systems coupled with CTES are presented.Special attention was paid to cold storage medium of phase change material(PCM)with high energy density and stable phase change temperature.Then,based on the classification of driven energy,the different applications of passive or active cooling systems with CTES are classified,including building cooling,cold chain logistics,and other refrigeration systems.Most importantly,the operation control which is necessary to performance optimization is presented,including operational control strategies,cold load predictions,and economic evaluation methods.Three types of operational control strategies are summarised using water storage and cooling system as an example.Two types of cold load predictions,parametric regression and artificial neural network method,are introduced.Three aspects of economic costs are summarized in terms of initial equipment investment cost,operational cost,and life-cycle cost are summarized.Finally,an outlook on the development of cooling systems using CTES is given.
文摘A novel operation control method for relay protection in flexible DC distribution networks with distributed power supply is proposed to address the issue of inaccurate fault location during relay protection,leading to poor performance.The method combines a fault-tolerant fault location method based on long-term and short-term memory networks to accurately locate the fault section.Then,an operation control method for relay protection based on adaptive weight and whale optimization algorithm(WOA)is used to construct an objective function considering the shortest relay protection action time and the smallest impulse current.The adaptive weight and WOA are employed to obtain the optimal strategy for relay protection operation control,reducing the action time and impulse current.Experimental results demonstrate the effectiveness of the proposed method in accurately locating faults and improving relay protection performance.The longest operation time is reduced by 4.7023 s,and the maximum impulse current is limited to 0.3 A,effectively controlling the impact of large impulse currents and enhancing control efficiency.
基金Supported by the National Natural Science Foundation of China(No.50875054)Weihai Science and Technology Development Plan Project(No.2012DXGJ13)
文摘A series-parallel hydraulic hybrid system applied to public buses is put torwaro, ano parameters of key components are analyzed and determined. Energy management strategy based on logic thresh- old is designed which is aimed at efficient operation of the overall system considering the operational characteristic of the components and taking the curves of engine, hydraulic pump/motor and hydrau- lic pump as the main design basis; regenerative control strategy which makes regenerative brake sys- tem and frictional brake system work harmoniously is designed to raise recovery rate of regenerative brake energy. System dynamic modeling and simulation results show that the energy control strategy designed here is able to adapt system to changes of working condition and switch the operating mode reasonably. The regenerative braking control strategy is effective in raising the utilization of energy and improving fuel economy.
基金Supported by the Governmental Public Industry Research Special Funds for Projects of MWR (200901002,200901003,200901006)Key Projects in the National Science & Technology Pillar Program During the 11th Five-year Plan Period of China (2006BAB04A12)
文摘The controlled volume method of operation is especially suitable for large-scale water delivery canal system with complex operation requirements. An operating simulation model based on the storage volume control method for multi-reach canal system in series was established. In allusion to the deficiency of existing controlled volume algorithm, the improved controlled volume algorithm of the whole canal pools was proposed, and the simulation results indicated that the storage volume and water level of each canal pool could be accurately controlled after the improved algorithm had been adopted. However, for some typical discharge demand operating conditions, if the previously mentioned algorithm was adopted, then it certainly would cause some unnecessary gate adjustments, and consequently the disturbed canal pools would be increased. Therefore, the idea of controlled volume operation method of continuous canal pools was proposed, and corresponding algorithm was designed. Through simulating practical project, the results indicated that the new controlled volume algorithm proposed for typical operating conditions could comparatively and obviously reduce the number of regulated check gates and disturb canal pools for some typical discharge demand operating conditions, thus the control efficiency of canal system could be improved.
基金Supported by The National Natural Science Foundation of China(21076015,21376018,and 21576014)The Fundamental Research Funds for the Central Universities(ZY1503)
文摘In this work,the dynamics and operation of the totally reboiled reactive distillation columns are visualized in terms of transfer function based process models.This kind of processes is found to be characterized by underdamped step responses due to the special topological configuration and the intricate interplay between the reaction operation and the separation operation involved.The under-dampness can be substantially alleviated through the tight inventory control of bottom reboiler and this presents beneficial effects to process dynamics and operation.Two totally reboiled reactive distillation columns,separating,respectively,a hypothetical synthesis reaction from reactants A and B to product C,and a real decomposition reaction from 1,4-butanediol to tetrahydrofuran and water,are employed to demonstrate these uncommon behaviors.The results obtained give full support to the above qualitative interpretation.Despite the strong influences of reaction kinetics and thermodynamic properties of the reacting mixtures,the totally reboiled reactive distillation columns are generally considered to present such unique behaviors and require tight inventory control of bottom reboiler to facilitate their control system development.
文摘In recent years, in the process of low-carbon economy construction in China, the original power generation mode has been changed, and photovoltaic power generation technology has been adopted, which has promoted the rapid development of related industries. When constructing a new generation mode, there are high requirements for the application of various equipments. Among them, the generator set belongs to special equipment, which needs to be managed in order to realize the scientific utilization of energy and the protection of surrounding environment. At present, China has gradually expanded the construction scale of related industries, and at the same time introduced more advanced technology, and carried out all-round control on the power generation mode. This paper analyzes and discusses the operation control technology of distributed photovoltaic power generation.
文摘With the continuous improvement of social and economic level, in order to meet the needs of different production and life at present, chemical processing technology has been applied to all aspects of industrial production. Methanol, as a commonly used material in chemical processing, has a certain history of development in China, but there is still a big gap between it and the world's advanced level. Therefore, from the actual point of view, this paper fully explores the problems existing in the synthesis process and operation technology of methanol, and then puts forward the corresponding solutions.
文摘In recent years, with the rapid development of society, the demand for electric energy in the production field and life field is increasing, and the power supply quality is directly related to the performance of centralized control operation steam turbine in power plant. Once there is an operation problem, it will lead to the reduction of smooth power supply, poor quality, and even affect the production and life of society, damage to the benefits of the power plant. Based on this, the author studies and discusses the centralized control operation of steam turbine, analyzes the existing shortcomings, and puts forward relevant operation optimization measures, in order to lay a solid foundation for improving the power generation quality and production efficiency of power plant.
文摘One of the key tasks of centralized control operation of thermal power plant is to pre-control dangerous points, which ensures the safety of the whole thermal power plant. Therefore, it is necessary to understand the main dangerous points and causes of centralized control operation, so as to take effective solutions, implementing preventive pre-control, and ensuring the safety of thermal power plant.
文摘To promote the high-quality development of public hospitals, to implement standardized and refined management of public hospitals and to achieve quality improvement and efficiency enhancement, operation management and internal control management are the keys. In view of the operation management and internal control management of public hospitals, the state has issued relevant policies and regulations, which set up a high-quality development policy framework and method path for the hospitals. This paper selects three perspectives to think and put forward arguments on how to implement the policies according to the public hospitals' own conditions. Firstly, from the perspective of the relationship between operation and internal control, it discusses how to balance the implementation of operation and internal control, and clarifies that both operation and internal control should be carried out simultaneously;The second is to put forward some opinions on how to carry out the operation and internal control of small public hospitals which are facing more difficulties and challenges in the process of high-quality development, pointing out that they should pay attention to practice and effectiveness;The third is to discuss the relationship between financial management and internal control management of operation management, pointing out that financial management is closely related to both but different from each other. Strengthening financial management can help operation and internal control;At the same time, the difference between operation and internal control and finance should be emphasized so as to pay more attention to and carry out operation and internal control more effectively and provide a stronger impetus for the high-quality development of public hospitals.
基金Project(52272339)supported by the National Natural Science Foundation of ChinaProject(2023YFB390730303)supported by the National Key Research and Development Program of China+2 种基金Project(L2023G004)supported by the Science and Technology Research and Development Program of China State Railway Group Co.,Ltd.Project(QZKFKT2023-005)supported by the State Key Laboratory of Heavy-duty and Express High-power Electric Locomotive,ChinaProject(2022JZZ05)supported by the Open Foundation of MOE Key Laboratory of Engineering Structures of Heavy Haul Railway(Central South University),China。
文摘In this paper,a novel train positioning method considering satellite raw observation data was proposed,which aims to promote train positioning performance from an innovative perspective of the train satellite-based positioning error sources.The method focused on overcoming the abnormal observations in satellite observation data caused by railway environment rather than the positioning results.Specifically,the relative positioning experimental platform was built and the zero-baseline method was firstly employed to evaluate the carrier phase data quality,and then,GNSS combined observation models were adopted to construct the detection values,which were applied to judge abnormal-data through the dual-frequency observations.Further,ambiguity fixing optimization was investigated based on observation data selection in partly-blocked environments.The results show that the proposed method can effectively detect and address abnormal observations and improve positioning stability.Cycle slips and gross errors can be detected and identified based on dual-frequency global navigation satellite system data.After adopting the data selection strategy,the ambiguity fixing percentage was improved by 29.2%,and the standard deviation in the East,North,and Up components was enhanced by 12.7%,7.4%,and 12.5%,respectively.The proposed method can provide references for train positioning performance optimization in railway environments from the perspective of positioning error sources.
文摘The most prospective method for certain structural failures and damages that cannot employ redundancy is self-repairing techniques, to ensure especially the maximum flight safety. Based on the characters of self-repairing aircraft, this paper states some basic assumptions of the self-repairing aircraft, and puts forward some special new conceptions concerning the self-repairing aircraft: control input, operating input, command input, repair input and operating and control factor as well as their relationships. Thus it provides a simple and reliable mathematical model structure for the research on the self-repairing control of the aircraft.
