A new stress-based multi-scale failure criterion is proposed based on a series of off-axis tension tests, and their corresponding fiber failure modes and matrix failure modes are determined at the microscopic level. I...A new stress-based multi-scale failure criterion is proposed based on a series of off-axis tension tests, and their corresponding fiber failure modes and matrix failure modes are determined at the microscopic level. It is a physical mechanism based, three-dimensional damage analysis criterion which takes into consideration the constituent properties on the macroscopic failure behavior of the composite laminates. A complete set of stress transformation, damage determination and evolution methods are established to realize the application of the multi-scale method in failure analysis. Open-hole tension（OHT） specimens of three material systems（CCF300/5228, CCF300/5428 and T700/5428） are tested according to ASTM standard D5766, and good agreements are found between the experimental results and the numerical predictions. It is found that fiber strength is a key factor influencing the ultimate strength of the laminates, while matrix failure alleviates the stress concentration around the hole. Different matchings of fiber and matrix result in different failure modes as well as ultimate strengths.展开更多
Objective The lack of clarity regarding the application performance of a hybrid operating room(HOR)and the uncertainty of surgical scheduling often lead to its inefficient application.This study aimed to review the cl...Objective The lack of clarity regarding the application performance of a hybrid operating room(HOR)and the uncertainty of surgical scheduling often lead to its inefficient application.This study aimed to review the clinical application of our neurosurgical HOR and propose a scale to score cases clearly.Methods We reviewed the operating procedures and duration of stay in 1865 HOR cases.The actual procedures of each case were summarized into 5 application types,and numerical assignment was used to distinguish the dependence of each type on our HOR:surgical procedures combined with interventional procedures(4 points,the highest dependence),surgical procedures combined with imaging procedures(3 points),interventional procedures(2 points),imaging procedures(1 point),and surgical procedures(0 points,the lowest dependence).Results A novel scale that could score 1865 cases into those 5 grades was developed.The percentages by grade were as follows:4 points,4.24%;3 points,4.88%;2 points,20.75%;1 point,69.38%;and 0 points,0.75%.The cumulative usage time was 4241.9 h,the duration of which was as follows:4 points,16.17%;3 points,15.50%;2 points,31.32%;1 point,35.62%;and 0 points,1.39%.Conclusions The HOR serves as a multifunctional room to treat neurosurgical diseases.The scale helps to quickly prioritize cases that rely more on HOR,providing guidelines for surgical scheduling.Although our HOR is unsuitable for emergency cases,it clearly shows the application performance of our HOR to provide a reference for promoting its efficient application.展开更多
The dropping scales is an important parameter for comber noil and combing quality. Because the rocking of the nipper shaft makes the nippers move backward and forward through a series of links, the original position o...The dropping scales is an important parameter for comber noil and combing quality. Because the rocking of the nipper shaft makes the nippers move backward and forward through a series of links, the original position of nipper frame is altered when changing the dropping scales, the other parameters of combing are changed accordingly. In this paper, the timing of opening-closing on nipper, the timing of cylinder’s combing, the timing of detaching-lapping and variation of nip pressure are calculated and their effects on combing are analyzed in different dropping scales on E7/6 comber.展开更多
The turbulence statistics parameters （variables） of natural airflow within a large Open Top Chamber （OTC）, 4 m in high height and 3 m in diameter, were measured with a three-dimensional ultrasonic anemometer/therm...The turbulence statistics parameters （variables） of natural airflow within a large Open Top Chamber （OTC）, 4 m in high height and 3 m in diameter, were measured with a three-dimensional ultrasonic anemometer/thermometer at Research Station of Changbai Mountain Forest Ecosystems Jilin Province, China in May 2004, for improving the field application of OTP. Results showed that because of the physical limitation, turbulence within OTC exhibited unique map compared with that of natural environments. There were clear daily pat- terns for most parameters. Turbulence here seemed to be isotropic and closely linked at all directions. Shape of eddies looked like a ＇cylinder＇ which was very similar to the shape of OTC. Continuous airflow was always interpreted by large scale eddies from top of OTC and showed high interactive intermittence at all directions.展开更多
The Upper Triassic Xujiahe （须家河） Formation in the Sichuan （四川） Basin, Southwest China is distinctive for the basin-scale sand deposition. This relatively rare sedimentary phenomenon has not been well interpre...The Upper Triassic Xujiahe （须家河） Formation in the Sichuan （四川） Basin, Southwest China is distinctive for the basin-scale sand deposition. This relatively rare sedimentary phenomenon has not been well interpreted. Here we addressed this issue by discussing sedimentary framework and conceptual model. Analysis of sedimentary setting implied that the basin received transgression during the deposition. It had multiple provenance supplies and river networks, as being surrounded by old- lands in multiple directions including the north, east and south. Thus, the basin was generally charac-terized by coastal and widely open and shallow lacustrine deposition during the Late Triassic Xujiahe period. This is similar to the modern well-known Poyang （鄱阳） Lake. Therefore, we investigated the framework and conceptual model of the Sichuan Basin during the Xujiahe period with an analogue to the Poyang Lake. Results show that the conceptual model of the deposition can be divided into transgressive and regressive stages. The first, third and fifth mem- bers of the formation are in transgressive stage and the deposits are dominated by shore and shallow lacustrine mud. In contrast, the deposition is mainly of braided river channel sand deposits during the regressive stage, mainly including the second, fourth and sixth members of the formation. The sand deposited in almost the entire basin because of the lateral migration and forward moving of the cross networks of the braided rivers. The multiple alternations of short and rapid transgression and relatively long regression are beneficial to the basin-scale sand deposition. Thus, the main channel of the braided river and its extensional areas are favorable for the development of hydrocarbon reservoir. This provides practical significance to the reservoir evaluation and exploration. In addition, the results also justify the relatively distinctive sedimentary phenomenon in the study area and may also have im- plications for understanding the large-scale sand deposition elsewhere.展开更多
基金the National Basic Research and Development Program of China: Basic Scientific Research of Advanced Composites in Aeronautic and Astronautic Application Technology (No. 2010CB631103)
文摘A new stress-based multi-scale failure criterion is proposed based on a series of off-axis tension tests, and their corresponding fiber failure modes and matrix failure modes are determined at the microscopic level. It is a physical mechanism based, three-dimensional damage analysis criterion which takes into consideration the constituent properties on the macroscopic failure behavior of the composite laminates. A complete set of stress transformation, damage determination and evolution methods are established to realize the application of the multi-scale method in failure analysis. Open-hole tension（OHT） specimens of three material systems（CCF300/5228, CCF300/5428 and T700/5428） are tested according to ASTM standard D5766, and good agreements are found between the experimental results and the numerical predictions. It is found that fiber strength is a key factor influencing the ultimate strength of the laminates, while matrix failure alleviates the stress concentration around the hole. Different matchings of fiber and matrix result in different failure modes as well as ultimate strengths.
基金supported by the Technology Innovation Special Major Project of Hubei Province(grant number 2022BCA003).
文摘Objective The lack of clarity regarding the application performance of a hybrid operating room(HOR)and the uncertainty of surgical scheduling often lead to its inefficient application.This study aimed to review the clinical application of our neurosurgical HOR and propose a scale to score cases clearly.Methods We reviewed the operating procedures and duration of stay in 1865 HOR cases.The actual procedures of each case were summarized into 5 application types,and numerical assignment was used to distinguish the dependence of each type on our HOR:surgical procedures combined with interventional procedures(4 points,the highest dependence),surgical procedures combined with imaging procedures(3 points),interventional procedures(2 points),imaging procedures(1 point),and surgical procedures(0 points,the lowest dependence).Results A novel scale that could score 1865 cases into those 5 grades was developed.The percentages by grade were as follows:4 points,4.24%;3 points,4.88%;2 points,20.75%;1 point,69.38%;and 0 points,0.75%.The cumulative usage time was 4241.9 h,the duration of which was as follows:4 points,16.17%;3 points,15.50%;2 points,31.32%;1 point,35.62%;and 0 points,1.39%.Conclusions The HOR serves as a multifunctional room to treat neurosurgical diseases.The scale helps to quickly prioritize cases that rely more on HOR,providing guidelines for surgical scheduling.Although our HOR is unsuitable for emergency cases,it clearly shows the application performance of our HOR to provide a reference for promoting its efficient application.
文摘The dropping scales is an important parameter for comber noil and combing quality. Because the rocking of the nipper shaft makes the nippers move backward and forward through a series of links, the original position of nipper frame is altered when changing the dropping scales, the other parameters of combing are changed accordingly. In this paper, the timing of opening-closing on nipper, the timing of cylinder’s combing, the timing of detaching-lapping and variation of nip pressure are calculated and their effects on combing are analyzed in different dropping scales on E7/6 comber.
基金This research was supported by Project 0f Key program of the National Natural Science Foundation of China （90411020） and National Basic Research Program of China （2002CB412502）.
文摘The turbulence statistics parameters （variables） of natural airflow within a large Open Top Chamber （OTC）, 4 m in high height and 3 m in diameter, were measured with a three-dimensional ultrasonic anemometer/thermometer at Research Station of Changbai Mountain Forest Ecosystems Jilin Province, China in May 2004, for improving the field application of OTP. Results showed that because of the physical limitation, turbulence within OTC exhibited unique map compared with that of natural environments. There were clear daily pat- terns for most parameters. Turbulence here seemed to be isotropic and closely linked at all directions. Shape of eddies looked like a ＇cylinder＇ which was very similar to the shape of OTC. Continuous airflow was always interpreted by large scale eddies from top of OTC and showed high interactive intermittence at all directions.
基金supported by the Major State Basic Research Development Program(No.2012CB 214803)the China's National Science & Technology Special Project (No.2011ZX05004-005-03)+1 种基金the PetroChina Youth Innovation Foundation(No.2011D-5006-0105)the Key Subject Construction Project of Sichuan Province,China(No.SZD0414)
文摘The Upper Triassic Xujiahe （须家河） Formation in the Sichuan （四川） Basin, Southwest China is distinctive for the basin-scale sand deposition. This relatively rare sedimentary phenomenon has not been well interpreted. Here we addressed this issue by discussing sedimentary framework and conceptual model. Analysis of sedimentary setting implied that the basin received transgression during the deposition. It had multiple provenance supplies and river networks, as being surrounded by old- lands in multiple directions including the north, east and south. Thus, the basin was generally charac-terized by coastal and widely open and shallow lacustrine deposition during the Late Triassic Xujiahe period. This is similar to the modern well-known Poyang （鄱阳） Lake. Therefore, we investigated the framework and conceptual model of the Sichuan Basin during the Xujiahe period with an analogue to the Poyang Lake. Results show that the conceptual model of the deposition can be divided into transgressive and regressive stages. The first, third and fifth mem- bers of the formation are in transgressive stage and the deposits are dominated by shore and shallow lacustrine mud. In contrast, the deposition is mainly of braided river channel sand deposits during the regressive stage, mainly including the second, fourth and sixth members of the formation. The sand deposited in almost the entire basin because of the lateral migration and forward moving of the cross networks of the braided rivers. The multiple alternations of short and rapid transgression and relatively long regression are beneficial to the basin-scale sand deposition. Thus, the main channel of the braided river and its extensional areas are favorable for the development of hydrocarbon reservoir. This provides practical significance to the reservoir evaluation and exploration. In addition, the results also justify the relatively distinctive sedimentary phenomenon in the study area and may also have im- plications for understanding the large-scale sand deposition elsewhere.
