A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a n...A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.展开更多
In this paper, the control laws based on the Lyapunov stability theorem are designed for a two-level open quantum system to prepare the Hadamard gate, which is an important basic gate for the quantum computers. First,...In this paper, the control laws based on the Lyapunov stability theorem are designed for a two-level open quantum system to prepare the Hadamard gate, which is an important basic gate for the quantum computers. First, the density matrix interested in quantum system is transferred to vector formation.Then, in order to obtain a controller with higher accuracy and faster convergence rate, a Lyapunov function based on the matrix logarithm function is designed. After that, a procedure for the controller design is derived based on the Lyapunov stability theorem. Finally, the numerical simulation experiments for an amplitude damping Markovian open quantum system are performed to prepare the desired quantum gate. The simulation results show that the preparation of Hadamard gate based on the proposed control laws can achieve the fidelity up to 0.9985 for the different coupling strengths.展开更多
Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the tr...Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the transient flow,it is necessary to establish a transient hydraulic-thermal simulation model in order to determine the venting time.In this paper,based on two kinds of venting scenarios in which there is only one venting point in the venting system of a gas trunk pipeline segment—namely,where the venting point is either at one of the two ends or at the junction of two gas trunk pipeline segments—transient hydraulic-thermal simulation models are established.The models consist of gas flow governing equations,the gas state equation,gas physical property equations,initial conditions,and appropriate boundary conditions.The implicit central difference method is used to discretize the gas flow partial differential equations,and the trust-region-dogleg algorithm is used to solve the equations corresponding to each time step,in order to dynamically simulate the whole venting process.The judgment condition for the end of the venting process is that the average pressure of gas trunk pipeline segment is less than 0.11 MPa(actual pressure).Comparing the simulation results of the proposed model with those of the OLGA software and real operational data,we find that the venting time error is less than 10%.On this basis,a venting valve opening control principle is proposed,which prevents the venting noise from exceeded the specified noise value(85 d B)in the venting design of domestic gas pipeline projects.The established calculation model for venting time(dynamic simulation model)for a gas trunk pipeline segment and the proposed opening control principle of venting valve provide reference for the optimal operation of gas pipeline venting systems.展开更多
This paper presents a numerical analysis of a material test program investigating the crack opening properties of fibre reinforced concrete （FRC） round determinate panels （RDP）. The objective of this research is t...This paper presents a numerical analysis of a material test program investigating the crack opening properties of fibre reinforced concrete （FRC） round determinate panels （RDP）. The objective of this research is to set up a modified RDP test method to improve the current ASTM C1550 test method for FRC and fibre reinforced shotcrete （FRS） composite. By this test method, light small-diameter panels are applied and more crack information can be obtained by a new rotation angle measuring technique. It is shown that this modified test method can be used to effectively evaluate the crack opening resistance of FRC. The finite element analysis was then performed to clarify the crack propaga- tions and failure mode of FRC RDP panels. It helps establish a reasonable theoretical method to predict the structural response of RDP. combining with this modified testing technioue.展开更多
An improved analytical method to determine the content of 52 major, minor and trace elements in marine geological samples, using a HF-HCl-HNO_3 acid system with a high-pressure closed digestion method（HPCD）, is stud...An improved analytical method to determine the content of 52 major, minor and trace elements in marine geological samples, using a HF-HCl-HNO_3 acid system with a high-pressure closed digestion method（HPCD）, is studied by an inductively coupled plasma optical emission spectrometry（ICP-OES） and an inductively coupled plasma mass spectrometry（ICP-MS）. The operating parameters of the instruments are optimized, and the optimal analytical parameters are determined. The influences of optical spectrum and mass spectrum interferences, digestion methods and acid systems on the analytical results are investigated. The optimal spectral lines and isotopes are chosen, and internal standard element of rhodium is selected to compensate for matrix effects and analytical signals drifting. Compared with the methods of an electric heating plate digestion and a microwave digestion, a high-pressure closed digestion method is optimized with less acid, complete digestion,less damage for digestion process. The marine geological samples are dissolved completely by a HF-HCl-HNO_3 system, the relative error（RE） for the analytical results are all less than 6.0%. The method detection limits are 2–40μg/g by the ICP-OES, and 6–80 ng/g by ICP-MS. The methods are used to determine the marine sediment reference materials（GBW07309, GBW07311, GBW07313）, rock reference materials（GBW07103, GBW07104,GBW07105）, and cobalt-rich crust reference materials（GBW07337, GBW07338, GBW07339）, the obtained analytical results are in agreement with the certified values, and both of the relative standard deviation（RSD） and the relative error（RE） are less than 6.0%. The analytical method meets the requirements for determining 52 elements contents of bulk marine geological samples.展开更多
OBJECTIVE:To objectively evaluate the clinically curative effect of sidong wubu method on closed fracture of upper limbs.METHODS:A single-blind randomized controlled trial was used to divide 654 patients with closed f...OBJECTIVE:To objectively evaluate the clinically curative effect of sidong wubu method on closed fracture of upper limbs.METHODS:A single-blind randomized controlled trial was used to divide 654 patients with closed fracture of upper limbs at early stage into two groups.298 patients in the surgical group were treated with open reduction and internal fixation and 356 patients in the treatment group with sidong wubu method for 6 months as a course of treatment.RESULTS:As for short-term curative effect(after 6 courses of treatment),the total effective rate was 97.7% in the treatment group and 92.9% in the control group,and the excellent and good rate was 83.7% and 76.5% respectively.Fracture-healing time,treatment cost,function-recovering time,scores of symptoms and signs obviously declined in both groups with remarkable difference between the two groups.As to long-term curative effect(after follow-up visit for one year to 5 years and 2 months),there was still noticeable difference(χ 2 = 7.536,P<0.05) in total curative effect and in excellent and good rate between the two groups.CONCLUSION:With low cost,short treatment course,good function and other advantages,sidong wubu method can be first used to treat closed fracture of upper limbs.展开更多
This paper is concerned with the free vibration analysis of open circular cylindrical shells with either the two straight edges or the two curved edges simply supported and the remaining two edges supported by arbitra...This paper is concerned with the free vibration analysis of open circular cylindrical shells with either the two straight edges or the two curved edges simply supported and the remaining two edges supported by arbitrary classical boundary conditions. Based on the Donnell-Mushtari-Vlasov thin shell theory, an analytical solution of the traveling wave form along the simply supported edges and the modal wave form along the remaining two edges is obtained. With such a unidirectional traveling wave form solution, the method of the reverberation-ray matrix is introduced to derive the equation of natural frequencies of the shell with different classical boundary conditions. The exact solutions for natural frequencies of the open circular cylindrical shell are obtained with the employment of a golden section search algorithm. The calculation results are compared with those obtained by the finite element method and the methods in the available literature. The influence of length, thickness, radius, included angle, and the boundary conditions of the open circular cylindrical shell on the natural frequencies is investigated. The exact calculation results can be used as benchmark values for researchers to check their numerical methods and for engineers to design structures with thin shell components.展开更多
<b><span style="font-family:Verdana;">Background:</span></b><span style="font-family:Verdana;"></span><b> </b><span style="font-family:Verdan...<b><span style="font-family:Verdana;">Background:</span></b><span style="font-family:Verdana;"></span><b> </b><span style="font-family:Verdana;">Chronic anal fissure is a benign disorder which is associated with considerable discomfort. </span><span style="font-family:Verdana;"><b></b></span><b><b><span style="font-family:Verdana;">Aim of the Work:</span></b><span style="font-family:;" "=""><span style="font-family:Verdana;"></span></span></b><b> </b><span style="font-family:;" "=""><span style="font-family:Verdana;">The aim of this study was to compare the post-operative results of open and closed internal lateral sphincterotomies in the short and medium term.</span><b> </b></span><span style="font-family:Verdana;"><b></b></span><b><b><span style="font-family:Verdana;">Patient and Methods:</span></b><span style="font-family:;" "=""><span style="font-family:Verdana;"></span></span></b><b> </b><span style="font-family:Verdana;">We carried out a prospective randomized comparative study in the digestive and visceral surgery departments of Central Hospital of Yaounde over a period of 15</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">months. Patients were evaluated for each technique by several variables, including duration of surgery, post-operative pain, recurrence, surgical wound infection, gas and/or stool incontinence, and healing time with follow-up up to 12</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">months postoperatively.</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;"><b></b></span><b><b><span style="font-family:Verdana;">Results:</span></b><span style="font-family:;" "=""><span style="font-family:Verdana;"></span></span></b><b> </b><span style="font-family:Verdana;">A total of 63 patients underwent surgery within them we had 32 open lateral internal sphincterotom</span><span style="font-family:Verdana;">ies</span><span style="font-family:Verdana;"> (group 1) and 31 closed lateral internal sphincterotom</span><span style="font-family:Verdana;">ies</span><span style="font-family:Verdana;"> (group 2). There were 35 men and 28 women with a sex ratio of 1.25. The mean age was 35.36 ± 10.16 years with extremes ranging from 19 to 62 years. The typical presentation was pain on defecation. The majority of fissures were located at the posterior commissure. The average duration of the procedure was longer in patients in group 1 (15.34 minutes) compared to 5.22 minutes in patients in group 2. We found 3.12% of surgical wound infections in patients in group 1 and neither patient in group 2. Gas incontinence was 6.45% in group 2 patients and 28.12% in group 1.</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">The mean intensity of pain at 24 hours post-operative was between</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">4 and 6 on </span><span style="font-family:Verdana;">the </span><span style="font-family:Verdana;">visual analogue scale in patients in group 2 and between 7 and 10 in group 1. Wound healing time was 8.9 days in group </span><span style="font-family:Verdana;">1</span><span style="font-family:Verdana;"> and 4 days in group 2 patients. The hospital stay was 24 hours for both groups of patients. No recurrence was noted during the 6-month</span><span style="font-family:;" "=""> </span><span style="font-family:;" "=""><span style="font-family:Verdana;">follow-up period.</span><b> </b></span><span style="font-family:;" "=""><span style="font-family:Verdana;"><b></b></span><b><b><span style="font-family:Verdana;">Conclusion:</span></b><span style="font-family:Verdana;"></span></b></span><b> </b><span style="font-family:Verdana;">Closed lateral internal anal sphincterotomy is the treatment of choice for chronic anal fissures because it is effective and associated with </span><span style="font-family:Verdana;">a </span><span style="font-family:Verdana;">lower complication rate than the open sphincterotomy technique.</span>展开更多
Open source intelligence is one of the most important public data sources for strategic information analysis. One of the primary and core issues of strategic information research is information perception,so this pape...Open source intelligence is one of the most important public data sources for strategic information analysis. One of the primary and core issues of strategic information research is information perception,so this paper mainly expounds the perception method for strategic information perception in the open source intelligence environment as well as the framework and basic process of information perception. This paper argues that in order to match the information perception result with the information depiction result,it conducts practical exploration for the results of information acquisition,perception,depiction and analysis. This paper introduces and develops a monitoring platform for information perception. The results show that the method proposed in this paper is feasible.展开更多
The Contra-Rotating Open Rotor(CROR)design confronts significant noise challenges despite being one of the possible options for future green aeroengines.To efficiently estimate the noise emitted from a CROR,a three-di...The Contra-Rotating Open Rotor(CROR)design confronts significant noise challenges despite being one of the possible options for future green aeroengines.To efficiently estimate the noise emitted from a CROR,a three-dimensional unsteady prediction model based on the meshless method is presented.The unsteady wake flow and the aerodynamic load fluctuations on the blade are solved through the viscous vortex particle method,the blade element momentum theory and vortex lattice method.Then,the acoustic field is obtained through the Farassat’s formulation 1A.Validation of this method is conducted on a CROR,and a mesh-based method,e.g.,Nonlinear Harmonic(NLH)method,is also employed for comparison.It is found that the presented method is three times faster than NLH method while maintaining a comparable precision.A thorough parametric analysis is also carried out to illustrate the effects of rotational speed,rotor-rotor spacing and rear rotor diameter on the noise level.The rotor speed is found to be the most influencing factor,and by optimizing the speed difference between the front and rear rotors,a notable noise reduction can be expected.The current findings not only contribute to a deeper comprehension of the CROR’s aeroacoustic properties but also offer an effective tool for engineering applications.展开更多
An open-plus-closed-loop （OPCL） control problem for the chaotic motion of a 3D rigid pendulum subjected to a constant gravitationM force is studied. The 3D rigid pendulum is assumed to be consist of a rigid body sup...An open-plus-closed-loop （OPCL） control problem for the chaotic motion of a 3D rigid pendulum subjected to a constant gravitationM force is studied. The 3D rigid pendulum is assumed to be consist of a rigid body supported by a fixed and frictionless pivot with three rotational degrees. In order to avoid the singular phenomenon of Euler＇s angular velocity equation, the quaternion kinematic equation is used to describe the motion of the 3D rigid pendulum. An OPCL controller for chaotic motion of a 3D rigid pendulum at equilibrium position is designed. This OPCL controller contains two parts： the open-loop part to construct an ideal trajectory and the closed-loop part to stabilize the 3D rigid pendulum. Simulation results show that the controller is effective and efficient.展开更多
In this paper ,we introduce a class of generalized mapping called transfer open orclosed valued mapping to generalize the KKM theorem on H-space.Then asapplications,using our H-KKM theorem,we prove some coincidence th...In this paper ,we introduce a class of generalized mapping called transfer open orclosed valued mapping to generalize the KKM theorem on H-space.Then asapplications,using our H-KKM theorem,we prove some coincidence theorems.matching theorems and vector valued minimax inequalities which generalize slightly thecorresponding results in[1,2,4,5,6,7].展开更多
This paper presents the analysis of open microstrip structures by using diakoptic method of lines (ML) combined with periodic boundary conditions (PBC). The parameters of microstrip patch are obtained from patch curre...This paper presents the analysis of open microstrip structures by using diakoptic method of lines (ML) combined with periodic boundary conditions (PBC). The parameters of microstrip patch are obtained from patch current excited by plane wave. Impedance matrix elements are computed by using fast Fourier transform(FFT), and reduced equation is solved by using diakoptic technique. Consequently, the computing time is reduced significantly. The convergence property of simulating open structure by using PBC and the comparison of the computer time between using PBC and usual absorbing boundary condition (ABC) show the validity of the method proposed in this paper. Finally, the resonant frequency of a microstrip patch is computed. The numerical results obtained are in good agreement with those published.展开更多
We prove that the interior stresses within both a non-parabolic open inhomogeneity and another interacting non-elliptical closed inhomogeneity can still remain constant when the matrix is simultaneously under the acti...We prove that the interior stresses within both a non-parabolic open inhomogeneity and another interacting non-elliptical closed inhomogeneity can still remain constant when the matrix is simultaneously under the action of a screw dislocation and uniform remote anti-plane stresses.The constancy of interior stresses is realized through the construction of a conformal mapping function for the doubly connected domain occupied by the surrounding matrix.The mapping function is endowed with the information describing the screw dislocation via the incorporation of two specifically defined logarithmic terms.The constant interior stress fields are observed to be independent of the specific open and closed shapes of the two inhomogeneities and the existence of the screw dislocation.In contrast,the existence of the neighboring screw dislocation significantly affects the open and closed shapes of the two inhomogeneities.展开更多
In order to optimize and transform closed mature apple orchards with standard rootstocks and improve the quality of fruit,taking a closed Red Fuji apple orchard as the test object,the effects of different density-redu...In order to optimize and transform closed mature apple orchards with standard rootstocks and improve the quality of fruit,taking a closed Red Fuji apple orchard as the test object,the effects of different density-reducing methods(deinterlacing,removing every other plant in each row,removing every other plant every other row)on the canopy microenvironment,tree structure,leaf photosynthesis and fruit quality were studied.The results showed that different density-reducing methods significantly reduced the orchard coverage and increased the crown transmittance.Among them,the deinterlacing treatment was the best in improving the population structure of the closed orchard,as it reduced the orchard coverage rate by 55.68 percentage points and the canopy transmittance by 82.38 percentage points,compared with the control(CK).Different density-reducing methods all could significantly reduce the branch amount in the closed orchard and optimized the branch composition.The three density-reducing methods decreased the number of branches per plant by 18.96%,12.41%and 19.58%,respectively,compared with the CK.And compared with the CK,the proportion of short branches and leafy branches to the total branches was increased by 17.13%,14.27%and 7.37%,respectively,and the proportion of long branches and developmental branches to the total branches was decreased by 24.47%,18.04%and 10.79%,respectively.The effects of the different density-reducing methods on the temperature,relative light intensity,SPAD and leaf photosynthetic rate in canopies all followed an order of deinterlacing>removing every other plant in each row>removing every other plant every other row>CK,while those on the relative humidity showed an order of deinterlacing>removing every other plant in each row>removing every other plant every other row>CK,while those on the relative humidity showed an order of deinterlacing<removing every other plant in each row<removing every other plant every other row<CK.The average single fruit weight(238.3 g),coloring index(89.2),smoothness index(83.2),soluble solid content(15.1%)and high quality fruit rate(82.4%)of the deinterlacing treatment were higher than those of other treatments,and the values were 18.2%,11.4%,5.85%,26.9%and 25.2%higher than the CK,respectively.The use of dein￣terlacing to reduce density is the best for improving the microenvironment of closed apple orchards and improving the photosynthetic efficiency and fruit quality.展开更多
When the geological environment of rock masses is disturbed,numerous non-persisting open joints can appear within it.It is crucial to investigate the effect of open joints on the mechanical properties of rock mass.How...When the geological environment of rock masses is disturbed,numerous non-persisting open joints can appear within it.It is crucial to investigate the effect of open joints on the mechanical properties of rock mass.However,it has been challenging to generate realistic open joints in traditional experimental tests and numerical simulations.This paper presents a novel solution to solve the problem.By utilizing the stochastic distribution of joints and an enhanced-fractal interpolation system(IFS)method,rough curves with any orientation can be generated.The Douglas-Peucker algorithm is then applied to simplify these curves by removing unnecessary points while preserving their fundamental shape.Subsequently,open joints are created by connecting points that move to both sides of rough curves based on the aperture distribution.Mesh modeling is performed to construct the final mesh model.Finally,the RB-DEM method is applied to transform the mesh model into a discrete element model containing geometric information about these open joints.Furthermore,this study explores the impacts of rough open joint orientation,aperture,and number on rock fracture mechanics.This method provides a realistic and effective approach for modeling and simulating these non-persisting open joints.展开更多
A brief introduction is made for the Numerical Manifold Method and its analysing process in rock mechanics. Some aspects of the manifold method are improved in implementing process according to the practice of excavat...A brief introduction is made for the Numerical Manifold Method and its analysing process in rock mechanics. Some aspects of the manifold method are improved in implementing process according to the practice of excavating underground openings. Corresponding formulas are given and a computer program of the Numerical Manifold Method has been completed in this paper.展开更多
The paper presents the mining method for the close quarter coal seams with thin rock sheet, that is mining the low coal seam, recovering the top coal seam after putting down the roof rock of the low coal seam. Practic...The paper presents the mining method for the close quarter coal seams with thin rock sheet, that is mining the low coal seam, recovering the top coal seam after putting down the roof rock of the low coal seam. Practice has proved that in recovering the top coal outside the face width after the rock between seams falls naturally or is demolished, the technology is simple, easy to operate and does not make a great demand for technical equipment. In the process of recovering the top coal, the low seam support could not be affected seriously, and two seams mining could be coordinated. Compared with the individual mining method, this mining method can produce a better economic benefit.展开更多
基金Project(24A0006)supported by the Key Project of Scientific Research Fund of Hunan Provincial Department of Education,ChinaProject(2024JJ5430)supported by the Natural Science Foundation of Hunan Province,ChinaProjects(2024JK2045,2023RC3061)supported by the Science and Technology Innovation Program of Hunan Province,China。
文摘A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.
基金supported by National Natural Science Foundation of China(61573330)Chinese Academy of Sciences(CAS)the World Academy of Sciences(TWAS)
文摘In this paper, the control laws based on the Lyapunov stability theorem are designed for a two-level open quantum system to prepare the Hadamard gate, which is an important basic gate for the quantum computers. First, the density matrix interested in quantum system is transferred to vector formation.Then, in order to obtain a controller with higher accuracy and faster convergence rate, a Lyapunov function based on the matrix logarithm function is designed. After that, a procedure for the controller design is derived based on the Lyapunov stability theorem. Finally, the numerical simulation experiments for an amplitude damping Markovian open quantum system are performed to prepare the desired quantum gate. The simulation results show that the preparation of Hadamard gate based on the proposed control laws can achieve the fidelity up to 0.9985 for the different coupling strengths.
基金supported by the National Natural Science Foundation of China(Grant No.52174064)
文摘Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the transient flow,it is necessary to establish a transient hydraulic-thermal simulation model in order to determine the venting time.In this paper,based on two kinds of venting scenarios in which there is only one venting point in the venting system of a gas trunk pipeline segment—namely,where the venting point is either at one of the two ends or at the junction of two gas trunk pipeline segments—transient hydraulic-thermal simulation models are established.The models consist of gas flow governing equations,the gas state equation,gas physical property equations,initial conditions,and appropriate boundary conditions.The implicit central difference method is used to discretize the gas flow partial differential equations,and the trust-region-dogleg algorithm is used to solve the equations corresponding to each time step,in order to dynamically simulate the whole venting process.The judgment condition for the end of the venting process is that the average pressure of gas trunk pipeline segment is less than 0.11 MPa(actual pressure).Comparing the simulation results of the proposed model with those of the OLGA software and real operational data,we find that the venting time error is less than 10%.On this basis,a venting valve opening control principle is proposed,which prevents the venting noise from exceeded the specified noise value(85 d B)in the venting design of domestic gas pipeline projects.The established calculation model for venting time(dynamic simulation model)for a gas trunk pipeline segment and the proposed opening control principle of venting valve provide reference for the optimal operation of gas pipeline venting systems.
基金Supported by the National Natural Science Foundation of China (50708084)Wuhan Chenguang Science and Technology Project for Young Experts (20035002016-30)
文摘This paper presents a numerical analysis of a material test program investigating the crack opening properties of fibre reinforced concrete （FRC） round determinate panels （RDP）. The objective of this research is to set up a modified RDP test method to improve the current ASTM C1550 test method for FRC and fibre reinforced shotcrete （FRS） composite. By this test method, light small-diameter panels are applied and more crack information can be obtained by a new rotation angle measuring technique. It is shown that this modified test method can be used to effectively evaluate the crack opening resistance of FRC. The finite element analysis was then performed to clarify the crack propaga- tions and failure mode of FRC RDP panels. It helps establish a reasonable theoretical method to predict the structural response of RDP. combining with this modified testing technioue.
基金The China Ocean Mineral Resources Research and Development Association Research Program of the State Oceanic Administration of China under contract No.DY125-13-R-07the National Natural Science Foundation of China under contract Nos 41322036 and 41230960+1 种基金the Shandong Provincial Natural Science Foundation of China under contract No.ZR2014DP009the Special Basic Research Funds for Central Public Research Institutes for The First Institute of Oceanography,State Oceanic Administration of China under contract Nos GY0213G06 and GY02-2012G35
文摘An improved analytical method to determine the content of 52 major, minor and trace elements in marine geological samples, using a HF-HCl-HNO_3 acid system with a high-pressure closed digestion method（HPCD）, is studied by an inductively coupled plasma optical emission spectrometry（ICP-OES） and an inductively coupled plasma mass spectrometry（ICP-MS）. The operating parameters of the instruments are optimized, and the optimal analytical parameters are determined. The influences of optical spectrum and mass spectrum interferences, digestion methods and acid systems on the analytical results are investigated. The optimal spectral lines and isotopes are chosen, and internal standard element of rhodium is selected to compensate for matrix effects and analytical signals drifting. Compared with the methods of an electric heating plate digestion and a microwave digestion, a high-pressure closed digestion method is optimized with less acid, complete digestion,less damage for digestion process. The marine geological samples are dissolved completely by a HF-HCl-HNO_3 system, the relative error（RE） for the analytical results are all less than 6.0%. The method detection limits are 2–40μg/g by the ICP-OES, and 6–80 ng/g by ICP-MS. The methods are used to determine the marine sediment reference materials（GBW07309, GBW07311, GBW07313）, rock reference materials（GBW07103, GBW07104,GBW07105）, and cobalt-rich crust reference materials（GBW07337, GBW07338, GBW07339）, the obtained analytical results are in agreement with the certified values, and both of the relative standard deviation（RSD） and the relative error（RE） are less than 6.0%. The analytical method meets the requirements for determining 52 elements contents of bulk marine geological samples.
基金Supported by key disciplines of Shaanxi provincial educational departmentspecial fund for national clinical key specialties of Health Ministry
文摘OBJECTIVE:To objectively evaluate the clinically curative effect of sidong wubu method on closed fracture of upper limbs.METHODS:A single-blind randomized controlled trial was used to divide 654 patients with closed fracture of upper limbs at early stage into two groups.298 patients in the surgical group were treated with open reduction and internal fixation and 356 patients in the treatment group with sidong wubu method for 6 months as a course of treatment.RESULTS:As for short-term curative effect(after 6 courses of treatment),the total effective rate was 97.7% in the treatment group and 92.9% in the control group,and the excellent and good rate was 83.7% and 76.5% respectively.Fracture-healing time,treatment cost,function-recovering time,scores of symptoms and signs obviously declined in both groups with remarkable difference between the two groups.As to long-term curative effect(after follow-up visit for one year to 5 years and 2 months),there was still noticeable difference(χ 2 = 7.536,P<0.05) in total curative effect and in excellent and good rate between the two groups.CONCLUSION:With low cost,short treatment course,good function and other advantages,sidong wubu method can be first used to treat closed fracture of upper limbs.
基金Project supported by the National Natural Science Foundation of China （Nos. 51209052, 51279038, and 51479041）, the Natural Sci- ence Foundation of Heilongjiang Province （No. QC2011C013）, and the Opening Funds of State Key Laboratory of Ocean Engineering of Shanghai Jiao Tong University （No. 1307）, China
文摘This paper is concerned with the free vibration analysis of open circular cylindrical shells with either the two straight edges or the two curved edges simply supported and the remaining two edges supported by arbitrary classical boundary conditions. Based on the Donnell-Mushtari-Vlasov thin shell theory, an analytical solution of the traveling wave form along the simply supported edges and the modal wave form along the remaining two edges is obtained. With such a unidirectional traveling wave form solution, the method of the reverberation-ray matrix is introduced to derive the equation of natural frequencies of the shell with different classical boundary conditions. The exact solutions for natural frequencies of the open circular cylindrical shell are obtained with the employment of a golden section search algorithm. The calculation results are compared with those obtained by the finite element method and the methods in the available literature. The influence of length, thickness, radius, included angle, and the boundary conditions of the open circular cylindrical shell on the natural frequencies is investigated. The exact calculation results can be used as benchmark values for researchers to check their numerical methods and for engineers to design structures with thin shell components.
文摘<b><span style="font-family:Verdana;">Background:</span></b><span style="font-family:Verdana;"></span><b> </b><span style="font-family:Verdana;">Chronic anal fissure is a benign disorder which is associated with considerable discomfort. </span><span style="font-family:Verdana;"><b></b></span><b><b><span style="font-family:Verdana;">Aim of the Work:</span></b><span style="font-family:;" "=""><span style="font-family:Verdana;"></span></span></b><b> </b><span style="font-family:;" "=""><span style="font-family:Verdana;">The aim of this study was to compare the post-operative results of open and closed internal lateral sphincterotomies in the short and medium term.</span><b> </b></span><span style="font-family:Verdana;"><b></b></span><b><b><span style="font-family:Verdana;">Patient and Methods:</span></b><span style="font-family:;" "=""><span style="font-family:Verdana;"></span></span></b><b> </b><span style="font-family:Verdana;">We carried out a prospective randomized comparative study in the digestive and visceral surgery departments of Central Hospital of Yaounde over a period of 15</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">months. Patients were evaluated for each technique by several variables, including duration of surgery, post-operative pain, recurrence, surgical wound infection, gas and/or stool incontinence, and healing time with follow-up up to 12</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">months postoperatively.</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;"><b></b></span><b><b><span style="font-family:Verdana;">Results:</span></b><span style="font-family:;" "=""><span style="font-family:Verdana;"></span></span></b><b> </b><span style="font-family:Verdana;">A total of 63 patients underwent surgery within them we had 32 open lateral internal sphincterotom</span><span style="font-family:Verdana;">ies</span><span style="font-family:Verdana;"> (group 1) and 31 closed lateral internal sphincterotom</span><span style="font-family:Verdana;">ies</span><span style="font-family:Verdana;"> (group 2). There were 35 men and 28 women with a sex ratio of 1.25. The mean age was 35.36 ± 10.16 years with extremes ranging from 19 to 62 years. The typical presentation was pain on defecation. The majority of fissures were located at the posterior commissure. The average duration of the procedure was longer in patients in group 1 (15.34 minutes) compared to 5.22 minutes in patients in group 2. We found 3.12% of surgical wound infections in patients in group 1 and neither patient in group 2. Gas incontinence was 6.45% in group 2 patients and 28.12% in group 1.</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">The mean intensity of pain at 24 hours post-operative was between</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">4 and 6 on </span><span style="font-family:Verdana;">the </span><span style="font-family:Verdana;">visual analogue scale in patients in group 2 and between 7 and 10 in group 1. Wound healing time was 8.9 days in group </span><span style="font-family:Verdana;">1</span><span style="font-family:Verdana;"> and 4 days in group 2 patients. The hospital stay was 24 hours for both groups of patients. No recurrence was noted during the 6-month</span><span style="font-family:;" "=""> </span><span style="font-family:;" "=""><span style="font-family:Verdana;">follow-up period.</span><b> </b></span><span style="font-family:;" "=""><span style="font-family:Verdana;"><b></b></span><b><b><span style="font-family:Verdana;">Conclusion:</span></b><span style="font-family:Verdana;"></span></b></span><b> </b><span style="font-family:Verdana;">Closed lateral internal anal sphincterotomy is the treatment of choice for chronic anal fissures because it is effective and associated with </span><span style="font-family:Verdana;">a </span><span style="font-family:Verdana;">lower complication rate than the open sphincterotomy technique.</span>
基金Supported by the National Social Science Fund Project(No.18BTQ054)
文摘Open source intelligence is one of the most important public data sources for strategic information analysis. One of the primary and core issues of strategic information research is information perception,so this paper mainly expounds the perception method for strategic information perception in the open source intelligence environment as well as the framework and basic process of information perception. This paper argues that in order to match the information perception result with the information depiction result,it conducts practical exploration for the results of information acquisition,perception,depiction and analysis. This paper introduces and develops a monitoring platform for information perception. The results show that the method proposed in this paper is feasible.
基金the financial support from the National Natural Science Foundation of China(Nos.52276045 and 52206062)the Fundamental Research Funds for the Central Universities,China(Nos.3122019171,3122021087 and 3122022QD06).
文摘The Contra-Rotating Open Rotor(CROR)design confronts significant noise challenges despite being one of the possible options for future green aeroengines.To efficiently estimate the noise emitted from a CROR,a three-dimensional unsteady prediction model based on the meshless method is presented.The unsteady wake flow and the aerodynamic load fluctuations on the blade are solved through the viscous vortex particle method,the blade element momentum theory and vortex lattice method.Then,the acoustic field is obtained through the Farassat’s formulation 1A.Validation of this method is conducted on a CROR,and a mesh-based method,e.g.,Nonlinear Harmonic(NLH)method,is also employed for comparison.It is found that the presented method is three times faster than NLH method while maintaining a comparable precision.A thorough parametric analysis is also carried out to illustrate the effects of rotational speed,rotor-rotor spacing and rear rotor diameter on the noise level.The rotor speed is found to be the most influencing factor,and by optimizing the speed difference between the front and rear rotors,a notable noise reduction can be expected.The current findings not only contribute to a deeper comprehension of the CROR’s aeroacoustic properties but also offer an effective tool for engineering applications.
基金supported by the National Natural Science Foundation of China(No.11072038)the Municipal Key Programs of Natural Science Foundation of Beijing(No.KZ201110772039)
文摘An open-plus-closed-loop （OPCL） control problem for the chaotic motion of a 3D rigid pendulum subjected to a constant gravitationM force is studied. The 3D rigid pendulum is assumed to be consist of a rigid body supported by a fixed and frictionless pivot with three rotational degrees. In order to avoid the singular phenomenon of Euler＇s angular velocity equation, the quaternion kinematic equation is used to describe the motion of the 3D rigid pendulum. An OPCL controller for chaotic motion of a 3D rigid pendulum at equilibrium position is designed. This OPCL controller contains two parts： the open-loop part to construct an ideal trajectory and the closed-loop part to stabilize the 3D rigid pendulum. Simulation results show that the controller is effective and efficient.
文摘In this paper ,we introduce a class of generalized mapping called transfer open orclosed valued mapping to generalize the KKM theorem on H-space.Then asapplications,using our H-KKM theorem,we prove some coincidence theorems.matching theorems and vector valued minimax inequalities which generalize slightly thecorresponding results in[1,2,4,5,6,7].
基金Supported by the National Natural Science Foundation of China
文摘This paper presents the analysis of open microstrip structures by using diakoptic method of lines (ML) combined with periodic boundary conditions (PBC). The parameters of microstrip patch are obtained from patch current excited by plane wave. Impedance matrix elements are computed by using fast Fourier transform(FFT), and reduced equation is solved by using diakoptic technique. Consequently, the computing time is reduced significantly. The convergence property of simulating open structure by using PBC and the comparison of the computer time between using PBC and usual absorbing boundary condition (ABC) show the validity of the method proposed in this paper. Finally, the resonant frequency of a microstrip patch is computed. The numerical results obtained are in good agreement with those published.
基金Project supported by the National Natural Science Foundation of China(No.11272121)the Natural Sciences and Engineering Research Council of Canada(No.RGPIN-2017-03716115112).
文摘We prove that the interior stresses within both a non-parabolic open inhomogeneity and another interacting non-elliptical closed inhomogeneity can still remain constant when the matrix is simultaneously under the action of a screw dislocation and uniform remote anti-plane stresses.The constancy of interior stresses is realized through the construction of a conformal mapping function for the doubly connected domain occupied by the surrounding matrix.The mapping function is endowed with the information describing the screw dislocation via the incorporation of two specifically defined logarithmic terms.The constant interior stress fields are observed to be independent of the specific open and closed shapes of the two inhomogeneities and the existence of the screw dislocation.In contrast,the existence of the neighboring screw dislocation significantly affects the open and closed shapes of the two inhomogeneities.
基金Supported by Key Research and Development Program of Shandong Province(2017CXGC0210)Agricultural Science and Technology Innovation Project of Shandong Academy of Agricultural Sciences(CXGC2017D01)+3 种基金National Key R&D Program of China(2016YFD0201100)National Natural Science Foundation of China(31600021)Modern Agricultural Industry Technology System of China for Apple(CARS-27)Dongying Science and Technology Program(2015GG0104)
文摘In order to optimize and transform closed mature apple orchards with standard rootstocks and improve the quality of fruit,taking a closed Red Fuji apple orchard as the test object,the effects of different density-reducing methods(deinterlacing,removing every other plant in each row,removing every other plant every other row)on the canopy microenvironment,tree structure,leaf photosynthesis and fruit quality were studied.The results showed that different density-reducing methods significantly reduced the orchard coverage and increased the crown transmittance.Among them,the deinterlacing treatment was the best in improving the population structure of the closed orchard,as it reduced the orchard coverage rate by 55.68 percentage points and the canopy transmittance by 82.38 percentage points,compared with the control(CK).Different density-reducing methods all could significantly reduce the branch amount in the closed orchard and optimized the branch composition.The three density-reducing methods decreased the number of branches per plant by 18.96%,12.41%and 19.58%,respectively,compared with the CK.And compared with the CK,the proportion of short branches and leafy branches to the total branches was increased by 17.13%,14.27%and 7.37%,respectively,and the proportion of long branches and developmental branches to the total branches was decreased by 24.47%,18.04%and 10.79%,respectively.The effects of the different density-reducing methods on the temperature,relative light intensity,SPAD and leaf photosynthetic rate in canopies all followed an order of deinterlacing>removing every other plant in each row>removing every other plant every other row>CK,while those on the relative humidity showed an order of deinterlacing>removing every other plant in each row>removing every other plant every other row>CK,while those on the relative humidity showed an order of deinterlacing<removing every other plant in each row<removing every other plant every other row<CK.The average single fruit weight(238.3 g),coloring index(89.2),smoothness index(83.2),soluble solid content(15.1%)and high quality fruit rate(82.4%)of the deinterlacing treatment were higher than those of other treatments,and the values were 18.2%,11.4%,5.85%,26.9%and 25.2%higher than the CK,respectively.The use of dein￣terlacing to reduce density is the best for improving the microenvironment of closed apple orchards and improving the photosynthetic efficiency and fruit quality.
基金supported by the National Key R&D Program of China (2018YFC0407004)the Fundamental Research Funds for the Central Universities (Nos.B200201059,2021FZZX001-14)the National Natural Science Foundation of China (Grant No.51709089)and 111 Project.
文摘When the geological environment of rock masses is disturbed,numerous non-persisting open joints can appear within it.It is crucial to investigate the effect of open joints on the mechanical properties of rock mass.However,it has been challenging to generate realistic open joints in traditional experimental tests and numerical simulations.This paper presents a novel solution to solve the problem.By utilizing the stochastic distribution of joints and an enhanced-fractal interpolation system(IFS)method,rough curves with any orientation can be generated.The Douglas-Peucker algorithm is then applied to simplify these curves by removing unnecessary points while preserving their fundamental shape.Subsequently,open joints are created by connecting points that move to both sides of rough curves based on the aperture distribution.Mesh modeling is performed to construct the final mesh model.Finally,the RB-DEM method is applied to transform the mesh model into a discrete element model containing geometric information about these open joints.Furthermore,this study explores the impacts of rough open joint orientation,aperture,and number on rock fracture mechanics.This method provides a realistic and effective approach for modeling and simulating these non-persisting open joints.
文摘A brief introduction is made for the Numerical Manifold Method and its analysing process in rock mechanics. Some aspects of the manifold method are improved in implementing process according to the practice of excavating underground openings. Corresponding formulas are given and a computer program of the Numerical Manifold Method has been completed in this paper.
文摘The paper presents the mining method for the close quarter coal seams with thin rock sheet, that is mining the low coal seam, recovering the top coal seam after putting down the roof rock of the low coal seam. Practice has proved that in recovering the top coal outside the face width after the rock between seams falls naturally or is demolished, the technology is simple, easy to operate and does not make a great demand for technical equipment. In the process of recovering the top coal, the low seam support could not be affected seriously, and two seams mining could be coordinated. Compared with the individual mining method, this mining method can produce a better economic benefit.
