A symmetrical one-dimensional(1D)photonic crystal structure with a Dirac-emimetal-defected layer is proposed.The material properties of the Dirac semimetal are governed by three key parameters:Fermi level,Fermi veloci...A symmetrical one-dimensional(1D)photonic crystal structure with a Dirac-emimetal-defected layer is proposed.The material properties of the Dirac semimetal are governed by three key parameters:Fermi level,Fermi velocity,and degeneracy factor.Simulation results demonstrate that the proposed structure generates multiple photonic bandgaps within the THz frequency range.In the low-THz region,pronounced resonant transmission peaks emerge,enabling near-perfect filtering performance.The positions of these defect modes can be dynamically tuned by adjusting the Fermi level and degeneracy factor.In mid-and high-THz frequency bands,the Dirac semimetal begins to exhibit metallic behavior,leading to attenuation of the transmission peaks and the appearance of absorption.The elevation of the Fermi level delays the critical threshold for the transition from the dielectric state to the metallic state,while an increase in Fermi velocity suppresses metallic behavior.Therefore,enhancing both the Fermi level and Fermi velocity contributes to strengthening the defect peak intensity.Conversely,increasing the degeneracy factor strengthens the metallic characteristics,thereby disrupting the high-frequency photonic bandgap.Notably,the defect layer thickness and incident angle exert significant influence on the transmission behavior:a larger incident angle causes the defect peak to shift toward higher frequencies and reduces its intensity,whereas a thicker defect layer shifts the defect peak toward lower frequencies.The modulation effects of both parameters become more pronounced as frequency increases.Compared with conventional photonic crystals,our work can provide a tunable structure over transmission properties,offering novel strategies for designing tunable filters and optical sensors.展开更多
为提高零中频接收机中正交(in-phase quadrature,IQ)失配信号校正的收敛速度与鲁棒性,本文将Kalman滤波算法与盲源分离结构结合,提出了一种基于双通道Kalman滤波的校正算法。该算法通过状态空间建模与协方差自适应更新,能够在动态环境...为提高零中频接收机中正交(in-phase quadrature,IQ)失配信号校正的收敛速度与鲁棒性,本文将Kalman滤波算法与盲源分离结构结合,提出了一种基于双通道Kalman滤波的校正算法。该算法通过状态空间建模与协方差自适应更新,能够在动态环境下实现更高效、稳定的参数估计,从而实现对IQ失配信号的有效补偿。将本文算法与最小均方算法(least mean square,LMS)、归一化最小均方算法(normalized least mean square,NLMS)和仿射投影算法(affine projection algorithm,APA)进行对比仿真,结果显示,校正后信号的镜像抑制比(image rejection ratio,IRR)均达到约45 dB,但双通道Kalman滤波算法对应的IRR曲面图更加平滑,同时,16QAM和16PSK调制方式下该算法的误符号率最低,表明本文算法能够有效实现IQ失配校正,具有较好的稳定性。本文算法迭代约50次时,均方误差收敛趋近于0,而LMS、NLMS和APA算法则分别需要迭代约500次、400次和200次才能够收敛,表明该算法具有较好的收敛性。通过参数的敏感性仿真分析,在较大的参数范围内本文算法达到的IRR差别甚微,具有良好的鲁棒性。展开更多
In sub nanometer carbon nanotubes,water exhibits unique dynamic characteristics,and in the high-frequency region of the infrared spectrum,where the stretching vibrations of the internal oxygen-hydrogen(O-H)bonds are c...In sub nanometer carbon nanotubes,water exhibits unique dynamic characteristics,and in the high-frequency region of the infrared spectrum,where the stretching vibrations of the internal oxygen-hydrogen(O-H)bonds are closely related to the hydrogen bonds(H-bonds)network between water molecules.Therefore,it is crucial to analyze the relationship between these two aspects.In this paper,the infrared spectrum and motion characteristics of the stretching vibrations of the O-H bonds in one-dimensional confined water(1DCW)and bulk water(BW)in(6,6)single-walled carbon nanotubes(SWNT)are studied by molecular dynamics simulations.The results show that the stretching vibrations of the two O-H bonds in 1DCW exhibit different frequencies in the infrared spectrum,while the O-H bonds in BW display two identical main frequency peaks.Further analysis using the spring oscillator model reveals that the difference in the stretching amplitude of the O-H bonds is the main factor causing the change in vibration frequency,where an increase in stretching amplitude leads to a decrease in spring stiffness and,consequently,a lower vibration frequency.A more in-depth study found that the interaction of H-bonds between water molecules is the fundamental cause of the increased stretching amplitude and decreased vibration frequency of the O-H bonds.Finally,by analyzing the motion trajectory of the H atoms,the dynamic differences between 1DCW and BW are clearly revealed.These findings provide a new perspective for understanding the behavior of water molecules at the nanoscale and are of significant importance in advancing the development of infrared spectroscopy detection technology.展开更多
Using the Bose-Fermi mapping method,we obtain the exact ground state wavefunction of one-dimensional(1D)Bose gas with the zero-range dipolar interaction in the strongly repulsive contact interaction limit.Its ground s...Using the Bose-Fermi mapping method,we obtain the exact ground state wavefunction of one-dimensional(1D)Bose gas with the zero-range dipolar interaction in the strongly repulsive contact interaction limit.Its ground state density distributions for both repulsive and attractive dipole interactions are exhibited.It is shown that in the case of the finite dipole interaction the density profiles do not change obviously with the increase of dipole interaction and display the typical shell structure of Tonks-Girardeau gases.As the repulsive dipole interaction is greatly strong,the density decreases at the center of the trap and displays a sunken valley.As the attractive dipole interaction increases,the density displays more oscillations and sharp peaks appear in the strong attraction limit,which mainly originate from the atoms occupying the low single particle levels.展开更多
Two-dimensional(2D)transition metal sulfides(TMDs)are emerging and highly well received 2D materials,which are considered as an ideal 2D platform for studying various electronic properties and potential applications d...Two-dimensional(2D)transition metal sulfides(TMDs)are emerging and highly well received 2D materials,which are considered as an ideal 2D platform for studying various electronic properties and potential applications due to their chemical diversity.Converting 2D TMDs into one-dimensional(1D)TMDs nanotubes can not only retain some advantages of 2D nanosheets but also providing a unique direction to explore the novel properties of TMDs materials in the 1D limit.However,the controllable preparation of high-quality nanotubes remains a major challenge.It is very necessary to review the advanced development of one-dimensional transition metal dichalcogenide nanotubes from preparation to application.Here,we first summarize a series of bottom-up synthesis methods of 1D TMDs,such as template growth and metal catalyzed method.Then,top-down synthesis methods are summarized,which included selfcuring and stacking of TMDs nanosheets.In addition,we discuss some key applications that utilize the properties of 1D-TMDs nanotubes in the areas of catalyst preparation,energy storage,and electronic devices.Last but not least,we prospect the preparation methods of high-quality 1D-TMDs nanotubes,which will lay a foundation for the synthesis of high-performance optoelectronic devices,catalysts,and energy storage components.展开更多
Adjustable or programmable metamaterials offer versatile functions,while the complex multi-dimensional regulation increases workload,and hinders their applications in practical scenarios.To address these challenges,we...Adjustable or programmable metamaterials offer versatile functions,while the complex multi-dimensional regulation increases workload,and hinders their applications in practical scenarios.To address these challenges,we present a mechanically programmable acoustic metamaterial for real-time focal tuning via one-dimensional phase-gradient modulation in this paper.The device integrates a phase gradient structure with concave cavity channels and an x-shaped telescopic mechanical framework,enabling dynamic adjustment of inter-unit spacing(1 mm-3 mm)through a microcontroller-driven motor.By modulating the spacing between adjacent channels,the phase gradient is precisely controlled,allowing continuous focal shift from 50 mm to 300 mm along the x-axis at 7500 Hz.Broadband focusing is also discussed in the range6800 Hz-8100 Hz,with transmission coefficients exceeding 0.5,ensuring high efficiency and robust performance.Experimental results align closely with simulations,validating the design's effectiveness and adaptability.Unlike conventional programmable metamaterials requiring multi-dimensional parameter optimization,this approach simplifies real-time control through single-axis mechanical adjustment,significantly reducing operational complexity.Due to the advantages of broadband focusing,simple control mode,real-time monitoring,and so on,the device may have extensive applications in the fields of acoustic imaging,nondestructive testing,ultrasound medical treatment,etc.展开更多
The oxygen evolution reaction(OER),a critical half-reaction in water electrolysis,has garnered significant attention.However,sluggish OER kinetics has emerged as a major impediment to efficient electrochemical energy c...The oxygen evolution reaction(OER),a critical half-reaction in water electrolysis,has garnered significant attention.However,sluggish OER kinetics has emerged as a major impediment to efficient electrochemical energy conversion.There is an urgent need to design novel electrocatalysts with optimized OER kinetics and enhanced intrinsic activity to improve overall OER performance.Herein,one-dimensional(1D)nanocomposites with high electrocatalytic activity were developed through the deposition of CoFePBA nanocubes onto the surface of MnO_(2) nanowires.The electronic structure of the nanocomposite surface was modified,and the synergistic effects between transition metals were leveraged to enhance catalytic activity through the deposition of Prussian blue analog(PBA)nanocubes on manganese dioxide nanowires.Specifically,CoFePBA featured an open crystal structure that offiered numerous electrochemical active sites and efficient charge transfer pathways.Additionally,the synergistic interactions between Co and Fe significantly reduced the OER overpotential.Additionally,the 1D rigid MnO_(2) acted as protective armor,ensuring the stability of active sites within CoFePBA during the OER.The synthesized MnO_(2)@CoFePBA achieved an overpotential of 1.614 V at 10 mA/cm^(2) and a small Tafel slope of 94 mV/dec and demonstrated stable performance for over 200 h.This work offers new insights into the rational design of various PBA-based nanocomposites with high activity and stability.展开更多
We study the thermodynamic properties of the classical one-dimensional generalized nonlinear Klein-Gordon lattice model(n≥2)by using the cluster variation method with linear response theory.The results of this method...We study the thermodynamic properties of the classical one-dimensional generalized nonlinear Klein-Gordon lattice model(n≥2)by using the cluster variation method with linear response theory.The results of this method are exact in the thermodynamic limit.We present the single-site reduced densityρ^((1))(z),averages such as(z^(2)),<|z^(n)|>,and<(z_(1)-z_(2))^(2)>,the specific heat C_(v),and the static correlation functions.We analyze the scaling behavior of these quantities and obtain the exact scaling powers at the low and high temperatures.Using these results,we gauge the accuracy of the projective truncation approximation for theφ^(4)lattice model.展开更多
One-dimensional nano-grating standard(ODNGS)is widely recognized as a crucial nanometric standard for metrological technology.However,achieving the ultratiny size of ODNGS with high consistent uniformity and low rough...One-dimensional nano-grating standard(ODNGS)is widely recognized as a crucial nanometric standard for metrological technology.However,achieving the ultratiny size of ODNGS with high consistent uniformity and low roughness by conventional processes such as the inductively coupled plasma(ICP)etching methodpresents a significant challenge in obtaining accurate calibration values.In this work,a 50-nm ODNGS with a conformal buffer layer(Al_(2)O_(3))is successfully obtained,indicating outstanding stability and abrasion resistance.Remarkably,the introduction of hydrogen silsesquioxane(HSQ)and amorphous Al_(2)O_(3)simultaneously guarantees an incredibly small expanded uncertainty(0.5 nm)and repeatability of the standard uniformity(less than 0.3 nm)in the grating dimensions.TheⅠ-Ⅴcurves of ODNGS with an Al_(2)O_(3)buffer layer at room temperature(RT)and200℃are depicted respectively to showcase the sustained favorable insulation properties.Notably,the nanostructure fluctuation,line edge roughness(LER)and line width roughness(LWR)of the standard can be decreased obviously by 64.1%,63%and 70%,respectively.Our results suggest that the ODNGS with Al_(2)O_(3)exhibits exceptional precision and robust calibration reliability for calibrating nanoscale measuring instruments.It holds tremendous potential for manufacturing high-precision nanostructures and grating arrays with precisely controllable dimensions,which will play a pivotal role in the fabrication of microfluidics chips,metasurface and photodetectors in the future.展开更多
Controlling charge polarity in the semiconducting single-walled carbon nanotubes(CNTs) by substitutional doping is a difficult work due to their extremely strong C–C bonding. In this work, an inner doping strategy is...Controlling charge polarity in the semiconducting single-walled carbon nanotubes(CNTs) by substitutional doping is a difficult work due to their extremely strong C–C bonding. In this work, an inner doping strategy is explored by filling CNTs with one-dimensional(1D)-TM_(6)Te_(6) nanowires to form TM_(6)Te_(6)@CNT-(16,0) 1D van der Waals heterostructures(1D-vd WHs). The systematic first-principles studies on the electronic properties of 1D-vd WHs show that N-type doping CNTs can be formed by charge transfer from TM_(6)Te_(6) nanowires to CNTs, without introducing additional carrier scattering.Particularly, contribution from both T M(e.g., Sc and Y) and Te atoms strengthens the charge transfer. The outside CNTs further confine the dispersion of Te-p orbitals in nanowires that deforms the C-π states at the bottom of the conduction band to quasi sp^(3) hybridization. Our study provides an inner doping strategy that can effectively confine the charge polarity of CNTs and further broaden its applications in some novel nano-devices.展开更多
In this paper,the mechanical response of a one-dimensional(1D)hexagonal piezoelectric quasicrystal(PQC)thin film is analyzed under electric and temperature loads.Based on the Euler-Bernoulli beam theory,a theoretical ...In this paper,the mechanical response of a one-dimensional(1D)hexagonal piezoelectric quasicrystal(PQC)thin film is analyzed under electric and temperature loads.Based on the Euler-Bernoulli beam theory,a theoretical model is proposed,resulting in coupled governing integral equations that account for interfacial normal and shear stresses.To numerically solve these integral equations,an expansion method using orthogonal Chebyshev polynomials is employed.The results provide insights into the interfacial stresses,axial force,as well as axial and vertical deformations of the PQC film.Additionally,fracture criteria,including stress intensity factors,mode angles,and the J-integral,are evaluated.The solution is compared with the membrane theory,neglecting the normal stress and bending deformation.Finally,the effects of stiffness and aspect ratio on the PQC film are thoroughly discussed.This study serves as a valuable guide for controlling the mechanical response and conducting safety assessments of PQC film systems.展开更多
Accurate estimation of the State of Charge(SOC),State of Health(SOH),and Terminal Resistance(TR)is crucial for the effective operation of Battery Management Systems(BMS)in lithium-ion batteries.This study conducts a c...Accurate estimation of the State of Charge(SOC),State of Health(SOH),and Terminal Resistance(TR)is crucial for the effective operation of Battery Management Systems(BMS)in lithium-ion batteries.This study conducts a comprehensive comparative analysis of four Kalman filter variants Extended Kalman Filter(EKF),Extended Kalman-Bucy Filter(EKBF),Unscented Kalman Filter(UKF),and Unscented Kalman-Bucy Filter(UKBF)under varying battery parameter conditions.These include temperature fluctuation,self-discharge,current direction,cell capacity,process noise,and measurement noise.Our findings reveal significant variations in the performance of SOC and SOH predictions across filters,emphasizing that UKF demonstrates superior robustness to noise,while EKF performs better under accurate system dynamics.The study underscores the need for adaptive filtering strategies that can dynamically adjust to evolving battery parameters,thereby enhancing BMS reliability and extending battery lifespan.展开更多
In this paper,we investigate the interfacial behavior of a thin,penny-shaped,one-dimensional(1D)hexagonal functionally graded(FG)piezoelectric quasicrystal(PQC)film bonded on a temperature-dependent elastic substrate ...In this paper,we investigate the interfacial behavior of a thin,penny-shaped,one-dimensional(1D)hexagonal functionally graded(FG)piezoelectric quasicrystal(PQC)film bonded on a temperature-dependent elastic substrate under thermal and electrical loads.The problem is modeled as axisymmetric based on the membrane theory,with the peeling stress and bending moment being disregarded.A potential theory method,combined with the Hankel transform technique,is utilized to derive the displacement field on the substrate surface.With perfect interfacial bonding assumption,an integral equation governing the phonon interfacial shear stress is formulated and numerically solved by the Chebyshev polynomials.Explicit expressions are derived for the interfacial shear stress,the internal stresses within the PQC film and the substrate,the axial strain,and the stress intensity factors(SIFs).Numerical simulations are conducted to investigate the effects of the film's aspect ratio,material inhomogeneity,material mismatch,and temperature-dependent material properties on its mechanical response.The results provide insights for the functional design and reliability assessment of FG PQC film/substrate systems.展开更多
[目的/意义]针对温室温湿度预测中多传感器数据融合可靠性低、传统模型忽略温湿度动态耦合,以及参数调优依赖人工经验等问题。[方法]首先,对传统卡尔曼(Kalman)滤波算法实施改进,通过动态调整过程噪声协方差和观测噪声协方差,结合新息...[目的/意义]针对温室温湿度预测中多传感器数据融合可靠性低、传统模型忽略温湿度动态耦合,以及参数调优依赖人工经验等问题。[方法]首先,对传统卡尔曼(Kalman)滤波算法实施改进,通过动态调整过程噪声协方差和观测噪声协方差,结合新息方差动态分配多传感器权重。其次,针对温湿度的强耦合性及其协同控制的需求,构建多输出长短期记忆-注意力机制(Long Short-Term Memory-Attention,LSTM-Attention)模型,以温湿度协同预测为目标,引入注意力机制自适应加权关键环境因子,并采用灰狼优化算法(Grey Wolf Optimizer,GWO)自动对超参数进行寻优。[结果和讨论]提出的自适应卡尔曼滤波算法在多点温湿度融合中的平均绝对偏差分别为1.59℃和8.64%,比传统卡尔曼滤波算法分别降低1.24%、8.57%。以该算法融合结果作为模型训练集,模型在温湿度预测中决定系数R2分别达到98.2%和99.3%,比传统Kalman提升4.7%和4.3%。GWO-LSTM-Atten⁃tion模型的温湿度预测均方根误差分别为0.7768℃和2.0564%,比LSTM、LSTM-Attention时间序列预测模型分别降低15.6%、6.6%,湿度分别降低29.2%、5.7%。[结论]提出的自适应卡尔曼融合算法能够有效抑制异常值影响,可在非平稳环境变化下实现多传感器数据可靠融合。在温室多环境因子预测中,GWO-LSTM-Attention模型温湿度预测值在未来可作为控制温室环境的重要参考,进而实现对温室环境的实时调控。展开更多
The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters we...The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters were firstly served as the chemical plating templates via a polyol-process.Then,one-dimensional（1D） Au-Ag porous nanostructures with tailored structural features could be prepared by controlling the individual steps involved in this process,such as nanowire growth,surface modification,thermal diffusion,and dealloying.Structural characterizations reveal these Au-Ag porous nanotubes,non-porous nanotubes and porous nanowires possess novel nano-architectures with multimodal open porosity and excellent structural continuity and integrity,which make them particularly desirable as novel 1D nanocarriers for biomedical,drug delivery and sensing applications.展开更多
This article reviews the recent developments in the controlled growth of one-dimensional （1D） oxide nanomaterials, including ZnO, SnO2, In203, Ga203, SiOx, MgO, and Al203. The growth of 2D oxide nanomaterials was ca...This article reviews the recent developments in the controlled growth of one-dimensional （1D） oxide nanomaterials, including ZnO, SnO2, In203, Ga203, SiOx, MgO, and Al203. The growth of 2D oxide nanomaterials was carried out in a simple chemical vapor transport and condensation system. This article will begin with a survey of nanotechnology and 1D nanomaterials achieved by many researchers, and then mainly discuss on the controlled growth of ID oxide nanomaterials with their morphologies, sizes, compositions, and microstructures controlled by altering experimental parameters, such as the temperature at the source material and the substrate, temperature gradient in the tube furnace, the total reaction time, the heating rate of the furnace, the gas flow rate, and the starting material. Their roles in the formation of various morphologies are analyzed and discussed. Finally, this review will be concluded with personal perspectives on the future research directions of this area.展开更多
文摘A symmetrical one-dimensional(1D)photonic crystal structure with a Dirac-emimetal-defected layer is proposed.The material properties of the Dirac semimetal are governed by three key parameters:Fermi level,Fermi velocity,and degeneracy factor.Simulation results demonstrate that the proposed structure generates multiple photonic bandgaps within the THz frequency range.In the low-THz region,pronounced resonant transmission peaks emerge,enabling near-perfect filtering performance.The positions of these defect modes can be dynamically tuned by adjusting the Fermi level and degeneracy factor.In mid-and high-THz frequency bands,the Dirac semimetal begins to exhibit metallic behavior,leading to attenuation of the transmission peaks and the appearance of absorption.The elevation of the Fermi level delays the critical threshold for the transition from the dielectric state to the metallic state,while an increase in Fermi velocity suppresses metallic behavior.Therefore,enhancing both the Fermi level and Fermi velocity contributes to strengthening the defect peak intensity.Conversely,increasing the degeneracy factor strengthens the metallic characteristics,thereby disrupting the high-frequency photonic bandgap.Notably,the defect layer thickness and incident angle exert significant influence on the transmission behavior:a larger incident angle causes the defect peak to shift toward higher frequencies and reduces its intensity,whereas a thicker defect layer shifts the defect peak toward lower frequencies.The modulation effects of both parameters become more pronounced as frequency increases.Compared with conventional photonic crystals,our work can provide a tunable structure over transmission properties,offering novel strategies for designing tunable filters and optical sensors.
文摘为提高零中频接收机中正交(in-phase quadrature,IQ)失配信号校正的收敛速度与鲁棒性,本文将Kalman滤波算法与盲源分离结构结合,提出了一种基于双通道Kalman滤波的校正算法。该算法通过状态空间建模与协方差自适应更新,能够在动态环境下实现更高效、稳定的参数估计,从而实现对IQ失配信号的有效补偿。将本文算法与最小均方算法(least mean square,LMS)、归一化最小均方算法(normalized least mean square,NLMS)和仿射投影算法(affine projection algorithm,APA)进行对比仿真,结果显示,校正后信号的镜像抑制比(image rejection ratio,IRR)均达到约45 dB,但双通道Kalman滤波算法对应的IRR曲面图更加平滑,同时,16QAM和16PSK调制方式下该算法的误符号率最低,表明本文算法能够有效实现IQ失配校正,具有较好的稳定性。本文算法迭代约50次时,均方误差收敛趋近于0,而LMS、NLMS和APA算法则分别需要迭代约500次、400次和200次才能够收敛,表明该算法具有较好的收敛性。通过参数的敏感性仿真分析,在较大的参数范围内本文算法达到的IRR差别甚微,具有良好的鲁棒性。
基金Supported by the Natural Science Foundation of China(51705326,52075339)。
文摘In sub nanometer carbon nanotubes,water exhibits unique dynamic characteristics,and in the high-frequency region of the infrared spectrum,where the stretching vibrations of the internal oxygen-hydrogen(O-H)bonds are closely related to the hydrogen bonds(H-bonds)network between water molecules.Therefore,it is crucial to analyze the relationship between these two aspects.In this paper,the infrared spectrum and motion characteristics of the stretching vibrations of the O-H bonds in one-dimensional confined water(1DCW)and bulk water(BW)in(6,6)single-walled carbon nanotubes(SWNT)are studied by molecular dynamics simulations.The results show that the stretching vibrations of the two O-H bonds in 1DCW exhibit different frequencies in the infrared spectrum,while the O-H bonds in BW display two identical main frequency peaks.Further analysis using the spring oscillator model reveals that the difference in the stretching amplitude of the O-H bonds is the main factor causing the change in vibration frequency,where an increase in stretching amplitude leads to a decrease in spring stiffness and,consequently,a lower vibration frequency.A more in-depth study found that the interaction of H-bonds between water molecules is the fundamental cause of the increased stretching amplitude and decreased vibration frequency of the O-H bonds.Finally,by analyzing the motion trajectory of the H atoms,the dynamic differences between 1DCW and BW are clearly revealed.These findings provide a new perspective for understanding the behavior of water molecules at the nanoscale and are of significant importance in advancing the development of infrared spectroscopy detection technology.
基金Project supported by the National Natural Science Foundation of China(Grant No.11174026)。
文摘Using the Bose-Fermi mapping method,we obtain the exact ground state wavefunction of one-dimensional(1D)Bose gas with the zero-range dipolar interaction in the strongly repulsive contact interaction limit.Its ground state density distributions for both repulsive and attractive dipole interactions are exhibited.It is shown that in the case of the finite dipole interaction the density profiles do not change obviously with the increase of dipole interaction and display the typical shell structure of Tonks-Girardeau gases.As the repulsive dipole interaction is greatly strong,the density decreases at the center of the trap and displays a sunken valley.As the attractive dipole interaction increases,the density displays more oscillations and sharp peaks appear in the strong attraction limit,which mainly originate from the atoms occupying the low single particle levels.
基金supported by the National Natural Science Foundation of China(No.22202065).
文摘Two-dimensional(2D)transition metal sulfides(TMDs)are emerging and highly well received 2D materials,which are considered as an ideal 2D platform for studying various electronic properties and potential applications due to their chemical diversity.Converting 2D TMDs into one-dimensional(1D)TMDs nanotubes can not only retain some advantages of 2D nanosheets but also providing a unique direction to explore the novel properties of TMDs materials in the 1D limit.However,the controllable preparation of high-quality nanotubes remains a major challenge.It is very necessary to review the advanced development of one-dimensional transition metal dichalcogenide nanotubes from preparation to application.Here,we first summarize a series of bottom-up synthesis methods of 1D TMDs,such as template growth and metal catalyzed method.Then,top-down synthesis methods are summarized,which included selfcuring and stacking of TMDs nanosheets.In addition,we discuss some key applications that utilize the properties of 1D-TMDs nanotubes in the areas of catalyst preparation,energy storage,and electronic devices.Last but not least,we prospect the preparation methods of high-quality 1D-TMDs nanotubes,which will lay a foundation for the synthesis of high-performance optoelectronic devices,catalysts,and energy storage components.
基金supported by the National Natural Science Foundation of China(Grant No.12374416)。
文摘Adjustable or programmable metamaterials offer versatile functions,while the complex multi-dimensional regulation increases workload,and hinders their applications in practical scenarios.To address these challenges,we present a mechanically programmable acoustic metamaterial for real-time focal tuning via one-dimensional phase-gradient modulation in this paper.The device integrates a phase gradient structure with concave cavity channels and an x-shaped telescopic mechanical framework,enabling dynamic adjustment of inter-unit spacing(1 mm-3 mm)through a microcontroller-driven motor.By modulating the spacing between adjacent channels,the phase gradient is precisely controlled,allowing continuous focal shift from 50 mm to 300 mm along the x-axis at 7500 Hz.Broadband focusing is also discussed in the range6800 Hz-8100 Hz,with transmission coefficients exceeding 0.5,ensuring high efficiency and robust performance.Experimental results align closely with simulations,validating the design's effectiveness and adaptability.Unlike conventional programmable metamaterials requiring multi-dimensional parameter optimization,this approach simplifies real-time control through single-axis mechanical adjustment,significantly reducing operational complexity.Due to the advantages of broadband focusing,simple control mode,real-time monitoring,and so on,the device may have extensive applications in the fields of acoustic imaging,nondestructive testing,ultrasound medical treatment,etc.
基金supported by the National Natural Science Foundation of China(No.52371240)the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘The oxygen evolution reaction(OER),a critical half-reaction in water electrolysis,has garnered significant attention.However,sluggish OER kinetics has emerged as a major impediment to efficient electrochemical energy conversion.There is an urgent need to design novel electrocatalysts with optimized OER kinetics and enhanced intrinsic activity to improve overall OER performance.Herein,one-dimensional(1D)nanocomposites with high electrocatalytic activity were developed through the deposition of CoFePBA nanocubes onto the surface of MnO_(2) nanowires.The electronic structure of the nanocomposite surface was modified,and the synergistic effects between transition metals were leveraged to enhance catalytic activity through the deposition of Prussian blue analog(PBA)nanocubes on manganese dioxide nanowires.Specifically,CoFePBA featured an open crystal structure that offiered numerous electrochemical active sites and efficient charge transfer pathways.Additionally,the synergistic interactions between Co and Fe significantly reduced the OER overpotential.Additionally,the 1D rigid MnO_(2) acted as protective armor,ensuring the stability of active sites within CoFePBA during the OER.The synthesized MnO_(2)@CoFePBA achieved an overpotential of 1.614 V at 10 mA/cm^(2) and a small Tafel slope of 94 mV/dec and demonstrated stable performance for over 200 h.This work offers new insights into the rational design of various PBA-based nanocomposites with high activity and stability.
基金supported by the National Natural Science Foundation of China(Grant No.11974420).
文摘We study the thermodynamic properties of the classical one-dimensional generalized nonlinear Klein-Gordon lattice model(n≥2)by using the cluster variation method with linear response theory.The results of this method are exact in the thermodynamic limit.We present the single-site reduced densityρ^((1))(z),averages such as(z^(2)),<|z^(n)|>,and<(z_(1)-z_(2))^(2)>,the specific heat C_(v),and the static correlation functions.We analyze the scaling behavior of these quantities and obtain the exact scaling powers at the low and high temperatures.Using these results,we gauge the accuracy of the projective truncation approximation for theφ^(4)lattice model.
基金financially supported by the National Natural Science Foundation of China(No.52175434)the National Key Research and Development Program of China(No.2022YFB3204801)
文摘One-dimensional nano-grating standard(ODNGS)is widely recognized as a crucial nanometric standard for metrological technology.However,achieving the ultratiny size of ODNGS with high consistent uniformity and low roughness by conventional processes such as the inductively coupled plasma(ICP)etching methodpresents a significant challenge in obtaining accurate calibration values.In this work,a 50-nm ODNGS with a conformal buffer layer(Al_(2)O_(3))is successfully obtained,indicating outstanding stability and abrasion resistance.Remarkably,the introduction of hydrogen silsesquioxane(HSQ)and amorphous Al_(2)O_(3)simultaneously guarantees an incredibly small expanded uncertainty(0.5 nm)and repeatability of the standard uniformity(less than 0.3 nm)in the grating dimensions.TheⅠ-Ⅴcurves of ODNGS with an Al_(2)O_(3)buffer layer at room temperature(RT)and200℃are depicted respectively to showcase the sustained favorable insulation properties.Notably,the nanostructure fluctuation,line edge roughness(LER)and line width roughness(LWR)of the standard can be decreased obviously by 64.1%,63%and 70%,respectively.Our results suggest that the ODNGS with Al_(2)O_(3)exhibits exceptional precision and robust calibration reliability for calibrating nanoscale measuring instruments.It holds tremendous potential for manufacturing high-precision nanostructures and grating arrays with precisely controllable dimensions,which will play a pivotal role in the fabrication of microfluidics chips,metasurface and photodetectors in the future.
基金Project supported by the National Natural Science Foundation of China (Grant No. 92477205)。
文摘Controlling charge polarity in the semiconducting single-walled carbon nanotubes(CNTs) by substitutional doping is a difficult work due to their extremely strong C–C bonding. In this work, an inner doping strategy is explored by filling CNTs with one-dimensional(1D)-TM_(6)Te_(6) nanowires to form TM_(6)Te_(6)@CNT-(16,0) 1D van der Waals heterostructures(1D-vd WHs). The systematic first-principles studies on the electronic properties of 1D-vd WHs show that N-type doping CNTs can be formed by charge transfer from TM_(6)Te_(6) nanowires to CNTs, without introducing additional carrier scattering.Particularly, contribution from both T M(e.g., Sc and Y) and Te atoms strengthens the charge transfer. The outside CNTs further confine the dispersion of Te-p orbitals in nanowires that deforms the C-π states at the bottom of the conduction band to quasi sp^(3) hybridization. Our study provides an inner doping strategy that can effectively confine the charge polarity of CNTs and further broaden its applications in some novel nano-devices.
基金Supported by the National Natural Science Foundation of China (Nos. 11902293 and 12272353)。
文摘In this paper,the mechanical response of a one-dimensional(1D)hexagonal piezoelectric quasicrystal(PQC)thin film is analyzed under electric and temperature loads.Based on the Euler-Bernoulli beam theory,a theoretical model is proposed,resulting in coupled governing integral equations that account for interfacial normal and shear stresses.To numerically solve these integral equations,an expansion method using orthogonal Chebyshev polynomials is employed.The results provide insights into the interfacial stresses,axial force,as well as axial and vertical deformations of the PQC film.Additionally,fracture criteria,including stress intensity factors,mode angles,and the J-integral,are evaluated.The solution is compared with the membrane theory,neglecting the normal stress and bending deformation.Finally,the effects of stiffness and aspect ratio on the PQC film are thoroughly discussed.This study serves as a valuable guide for controlling the mechanical response and conducting safety assessments of PQC film systems.
基金supported by the Royal Academy of Engineering,UK,in the scheme of Distinguished International Associate(DIA-2424-5-134).
文摘Accurate estimation of the State of Charge(SOC),State of Health(SOH),and Terminal Resistance(TR)is crucial for the effective operation of Battery Management Systems(BMS)in lithium-ion batteries.This study conducts a comprehensive comparative analysis of four Kalman filter variants Extended Kalman Filter(EKF),Extended Kalman-Bucy Filter(EKBF),Unscented Kalman Filter(UKF),and Unscented Kalman-Bucy Filter(UKBF)under varying battery parameter conditions.These include temperature fluctuation,self-discharge,current direction,cell capacity,process noise,and measurement noise.Our findings reveal significant variations in the performance of SOC and SOH predictions across filters,emphasizing that UKF demonstrates superior robustness to noise,while EKF performs better under accurate system dynamics.The study underscores the need for adaptive filtering strategies that can dynamically adjust to evolving battery parameters,thereby enhancing BMS reliability and extending battery lifespan.
基金Project supported by the National Natural Science Foundation of China(Nos.11902293 and 12272353)。
文摘In this paper,we investigate the interfacial behavior of a thin,penny-shaped,one-dimensional(1D)hexagonal functionally graded(FG)piezoelectric quasicrystal(PQC)film bonded on a temperature-dependent elastic substrate under thermal and electrical loads.The problem is modeled as axisymmetric based on the membrane theory,with the peeling stress and bending moment being disregarded.A potential theory method,combined with the Hankel transform technique,is utilized to derive the displacement field on the substrate surface.With perfect interfacial bonding assumption,an integral equation governing the phonon interfacial shear stress is formulated and numerically solved by the Chebyshev polynomials.Explicit expressions are derived for the interfacial shear stress,the internal stresses within the PQC film and the substrate,the axial strain,and the stress intensity factors(SIFs).Numerical simulations are conducted to investigate the effects of the film's aspect ratio,material inhomogeneity,material mismatch,and temperature-dependent material properties on its mechanical response.The results provide insights for the functional design and reliability assessment of FG PQC film/substrate systems.
文摘[目的/意义]针对温室温湿度预测中多传感器数据融合可靠性低、传统模型忽略温湿度动态耦合,以及参数调优依赖人工经验等问题。[方法]首先,对传统卡尔曼(Kalman)滤波算法实施改进,通过动态调整过程噪声协方差和观测噪声协方差,结合新息方差动态分配多传感器权重。其次,针对温湿度的强耦合性及其协同控制的需求,构建多输出长短期记忆-注意力机制(Long Short-Term Memory-Attention,LSTM-Attention)模型,以温湿度协同预测为目标,引入注意力机制自适应加权关键环境因子,并采用灰狼优化算法(Grey Wolf Optimizer,GWO)自动对超参数进行寻优。[结果和讨论]提出的自适应卡尔曼滤波算法在多点温湿度融合中的平均绝对偏差分别为1.59℃和8.64%,比传统卡尔曼滤波算法分别降低1.24%、8.57%。以该算法融合结果作为模型训练集,模型在温湿度预测中决定系数R2分别达到98.2%和99.3%,比传统Kalman提升4.7%和4.3%。GWO-LSTM-Atten⁃tion模型的温湿度预测均方根误差分别为0.7768℃和2.0564%,比LSTM、LSTM-Attention时间序列预测模型分别降低15.6%、6.6%,湿度分别降低29.2%、5.7%。[结论]提出的自适应卡尔曼融合算法能够有效抑制异常值影响,可在非平稳环境变化下实现多传感器数据可靠融合。在温室多环境因子预测中,GWO-LSTM-Attention模型温湿度预测值在未来可作为控制温室环境的重要参考,进而实现对温室环境的实时调控。
基金Project (2012CB932800) supported by the National Basic Research Program of ChinaProject (2012M521330) supported by China Postdoctoral Science Foundation
文摘The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters were firstly served as the chemical plating templates via a polyol-process.Then,one-dimensional（1D） Au-Ag porous nanostructures with tailored structural features could be prepared by controlling the individual steps involved in this process,such as nanowire growth,surface modification,thermal diffusion,and dealloying.Structural characterizations reveal these Au-Ag porous nanotubes,non-porous nanotubes and porous nanowires possess novel nano-architectures with multimodal open porosity and excellent structural continuity and integrity,which make them particularly desirable as novel 1D nanocarriers for biomedical,drug delivery and sensing applications.
基金The authors acknowledge the support from the National Major Project of Fundamental Research:Nanomaterials and Nanostructures(Grant No.2005CB623603)the National Natural Science Foundation of China(Grant No.10304018,10574131)the Special Fund for President Scholarship,Chinese Academy of Sciences.We also thank Dr.Liang LI,Prof.Changhui YE,Dr.Yufeng HA0,Dr.Xinsheng PENG,Dr.Shuhui SUN,Dr.Changhao LIANG,Mr.Peng YAN,Prof.Guowen MENG,and Prof.Guanghui LI for their helps in the preparation of this manuscript.
文摘This article reviews the recent developments in the controlled growth of one-dimensional （1D） oxide nanomaterials, including ZnO, SnO2, In203, Ga203, SiOx, MgO, and Al203. The growth of 2D oxide nanomaterials was carried out in a simple chemical vapor transport and condensation system. This article will begin with a survey of nanotechnology and 1D nanomaterials achieved by many researchers, and then mainly discuss on the controlled growth of ID oxide nanomaterials with their morphologies, sizes, compositions, and microstructures controlled by altering experimental parameters, such as the temperature at the source material and the substrate, temperature gradient in the tube furnace, the total reaction time, the heating rate of the furnace, the gas flow rate, and the starting material. Their roles in the formation of various morphologies are analyzed and discussed. Finally, this review will be concluded with personal perspectives on the future research directions of this area.
