This paper presents introduction for a QoS verification of on-chip interconnection based on the new progress of the industry, which combined with an AMD processor chip design for big data. Some verification experience...This paper presents introduction for a QoS verification of on-chip interconnection based on the new progress of the industry, which combined with an AMD processor chip design for big data. Some verification experience in architectural modeling and simulation of on-chip interconnection is also introduced in this paper.展开更多
A channel-selectable optical link based on a silicon microring resonator is proposed and demonstrated.This optical link consists of the wavelength-tunable microring modulators and the filters,defined on a silicon-on-i...A channel-selectable optical link based on a silicon microring resonator is proposed and demonstrated.This optical link consists of the wavelength-tunable microring modulators and the filters,defined on a silicon-on-insulator(SOI)platform.With a p–i–n junction embedded in the microring modulator,light at the resonant wavelength of the ring resonator is modulated.The 2^(nd)-order microring add-drop filter routes the modulated light.The channel selectivity is demonstrated by heating the microrings.With a thermal tuning efficiency of 5.9 mW/nm,the filter drop port response was successfully tuned with 0.8 nm channel spacing.We also show that modulation can be achieved in these channels.This device aims to offer flexibility and increase the bandwidth usage efficiency in optical interconnection.展开更多
The IUGG Associations for Atmosphere,Oceans and Cryosphere—IAMAS,IAPSO and IACS—held a Joint Scientific Assembly in Busan,South Korea,from 20 to 25 July 2025.This was the first joint assembly of all three associatio...The IUGG Associations for Atmosphere,Oceans and Cryosphere—IAMAS,IAPSO and IACS—held a Joint Scientific Assembly in Busan,South Korea,from 20 to 25 July 2025.This was the first joint assembly of all three associations since 2009,when they met in Montreal,Canada.It was the first time any of the associations had been hosted in Korea,and it had been two decades since any of them had met in Asia.The choice of Busan as the venue supported high levels of participation and smooth conference operations.The Local Organizing Committee,chaired by Prof.Kyung-Ja Ha of Pusan National University,oversaw the successful organization of the event.The assembly brought together 1725 participants in total,including 1282 researchers and 443 invited participants and individuals involved in side events,exhibitions,media coverage,and volunteer work.Participants came from 46 countries across Asia,Europe,North America,South America,Africa,and Oceania.IAMAS had 736 participants,IAPSO 321,and IACS 225.Survey data from 951 respondents revealed that Early Career Scientists,defined as those within 10 years of receiving their PhD,accounted for approximately 25%of participants.The demographic profile skewed young,with 66%of attendees in their 20s and 30s.The scientific program was organized by Prof.Seon-Ki Park(Chair),the Secretaries General from all three Associations,and the Local Organizing Committee.Reflecting the theme“Our Interconnected Earth,”the scientific program emphasized integrated approaches to climate systems,addressing climate change and environmental challenges through collaborative,transdisciplinary research.展开更多
The brain's functions are governed by molecular metabolic networks.However,due to the sophisticated spatial organization and diverse activities of the brain,characterizing both the minute and large-scale metabolic...The brain's functions are governed by molecular metabolic networks.However,due to the sophisticated spatial organization and diverse activities of the brain,characterizing both the minute and large-scale metabolic activity across the entire brain and its numerous micro-regions remains incredibly challenging.Here,we offer a high-definition spatially resolved metabolomics technique to better understand the metabolic specialization and interconnection throughout the mouse brain using improved ambient mass spectrometry imaging.This method allows for the simultaneous mapping of thousands of metabolites at a 30 μm spatial resolution across the mouse brain,ranging from structural lipids to functional neurotransmitters.This approach effectively reveals the distribution patterns of delicate microregions and their distinctive metabolic characteristics.Using an integrated database,we annotated 259 metabolites,demonstrating that the metabolome and metabolic pathways are unique to each brain microregion.The distribution of metabolites,closely linked to functionally connected brain regions and their interactions,offers profound insights into the complexity of chemical processes and their roles in brain function.An initial dataset for future metabolomics research might be obtained from the high-definition mouse brain's spatial metabolome atlas.展开更多
As circuit feature sizes approach the nanoscale,traditional Copper(Cu)interconnects face significant hurdles posed by rising resistance-capacitance(RC)delay,electromigration,and high power dissipation.These limitation...As circuit feature sizes approach the nanoscale,traditional Copper(Cu)interconnects face significant hurdles posed by rising resistance-capacitance(RC)delay,electromigration,and high power dissipation.These limitations impose constraints on the scalability and reliability of future semiconductor technologies.Our paper describes the new Vertical multilayer Aluminium Boron Nitride Nanoribbon(AlBN)interconnect structure,integrated with Density functional theory(DFT)using first-principles calculations.This study explores AlBN-based nanostructures with doping of 1Cu,2Cu,1Fe(Iron),and 2Fe for the application of Very Large Scale Integration(VLSI)interconnects.The AlBN structure utilized the advantages of vertical multilayer interconnects to both reduce the RC delay while enhancing signal integrity.Key parameters like Fermi energy,bandgap,binding energy,conduction channels,quantum resistance,and RC delay were analyzed.Through modeling and large-scale simulation,the structural,electronic,and stability attributes of the AlBN interconnects are analyzed,and the results illustrate considerable improvements in signal propagation against Cu interconnect structures.These findings confirm the tunable,high-performance nature of AlBN-2Fe,making it a promising candidate for future high-speed,low-power VLSI interconnect technologies.We demonstrated an advanced energy-efficient interconnect that can be easily scaled for future nanoscale VLSI circuit design and gives rise to a next generation of viable interconnect technology for high-capacity,high-speed,reliable semiconductor technology.展开更多
This paper presents an optimal operation method for embedded DC interconnections based on low-voltage AC/DC distribution areas(EDC-LVDA)under three-phase unbalanced compensation conditions.It can optimally determine t...This paper presents an optimal operation method for embedded DC interconnections based on low-voltage AC/DC distribution areas(EDC-LVDA)under three-phase unbalanced compensation conditions.It can optimally determine the transmission power of the DC and AC paths to simultaneously improve voltage quality and reduce losses.First,considering the embedded interconnected,unbalanced power structure of the distribution area,a power flow calculation method for EDC-LVDA that accounts for three-phase unbalanced compensation is introduced.This method accurately describes the power flow distribution characteristics under both AC and DC power allocation scenarios.Second,an optimization scheduling model for EDC-LVDA under three-phase unbalanced conditions is developed,incorporating network losses,voltage quality,DC link losses,and unbalance levels.The proposed model employs an improved particle swarm optimization(IPSO)two-layer algorithm to autonomously select different power allocation coefficients for the DC link and AC section under various operating conditions.This enables embedded economic optimization scheduling while maintaining compensation for unbalanced conditions.Finally,a case study based on the IEEE 13-node system for EDC-LVDA is conducted and tested.The results show that the proposed optimal operation method achieves a 100%voltage compliance rate and reduces network losses by 13.8%,while ensuring three-phase power balance compensation.This provides a practical solution for the modernization and upgrading of low-voltage power grids.展开更多
This study develops an event-triggered control strategy utilizing the fully actuated system approach for nonlinear interconnected large-scale systems containing actuator failures.First,to reduce the complexity of the ...This study develops an event-triggered control strategy utilizing the fully actuated system approach for nonlinear interconnected large-scale systems containing actuator failures.First,to reduce the complexity of the design process,we transform the studied system into the form of a fully actuated system through a state transformation.Then,to address the unknown nonlinear functions and actuator fault parameters,we employ neural networks and adaptive estimation techniques,respectively.Moreover,to reduce the control cost and improve the control efficiency,we introduce event-triggered inputs into the control strategy.It is proved by the Lyapunov stability analysis that all signals of the closed-loop system are bounded and the output of system eventually converge to a bounded region.The efficacy of the control approach is ultimately demonstrated via the simulation of an actual machine feeding system.展开更多
We propose a unidirectional emission silicon/ III-V laser, which comprises an III-V quantum wells microdisk connected to an output waveguide and a siliconon-insulator （SOI） waveguide. Characteristics of the III-V mi...We propose a unidirectional emission silicon/ III-V laser, which comprises an III-V quantum wells microdisk connected to an output waveguide and a siliconon-insulator （SOI） waveguide. Characteristics of the III-V microdisk with an output waveguide and mode coupling between the III-V output waveguide and the SO1 waveguide are investigated by three-dimensional （3D） finite-difference time-domain （FDTD） method. Simulation results show that the Q factor of a coupled mode for a 7.5 μm diameter microdisk connected to a 0.5 μm wide output waveguide is about 8.5×10^4. And the coupling efficiency between the III-V output waveguide and the SO1 waveguide is over 96% when the III-V waveguide width is 0.5 μm, the SO1 waveguide width is 0.565 μm and the vertical gap between those two waveguides is 0.1μm. The proposed hybrid laser would be of valuable applications for on-chip interconnects.展开更多
The silicon microring resonator plays an important role in large-scale,high-integrability modern switching matrixes and optical networks,as silicon photonics enables ring resonators of an unprecedented compact size.Bu...The silicon microring resonator plays an important role in large-scale,high-integrability modern switching matrixes and optical networks,as silicon photonics enables ring resonators of an unprecedented compact size.But as the nature of resonators is their sensitivity to temperature,their performances are vulnerable to being affected by thermal effect.In this paper,we analyze the dominant thermal effects to the application of silicon microring optical switch.On the one hand we theoretically analyze and experimentally measure the thermal crosstalk among adjacent microring optical switches with different distances,and give possible solutions to minimize the affect of thermal crosstalk.On the other hand we analyze and measure the thermooptic dynamic response of microring switch;the experiment shows for the thermal-tuning that the rising edge is around 2/is,and the falling edge is around 35 μs.We give the explanation of the asymmetric rise-time and fall-time.展开更多
A single mode hybrid Ⅲ-Ⅴ/silicon on-chip laser based on the flip-chip bonding technology for on-chip optical interconnection is demonstrated. A single mode Fabry-Perot laser structure with micro-structures on an InP...A single mode hybrid Ⅲ-Ⅴ/silicon on-chip laser based on the flip-chip bonding technology for on-chip optical interconnection is demonstrated. A single mode Fabry-Perot laser structure with micro-structures on an InP ridge waveguide is designed and fabricated on an InP/AIGaInAs multiple quantum well epitaxial layer structure wafer by using i-line lithography. Then, a silicon waveguide platform including a laser mounting stage is designed and fabricated on a silicon-on-insulator substrate. The single mode laser is flip-chip bonded on the laser mounting stage. The lasing light is butt-coupling to the silicon waveguide. The laser power output from a silicon waveguide is 1.3roW, and the threshold is 37mA at room temperature and continuous wave operation.展开更多
We propose a novel bias circuit, which can help a promising current-mode signaling （CMS） scheme （CMS-bias） enhance the robustness against process variation but consume less energy than the original bias circuit in...We propose a novel bias circuit, which can help a promising current-mode signaling （CMS） scheme （CMS-bias） enhance the robustness against process variation but consume less energy than the original bias circuit in this scheme. Monte Carlo and process corner analysis are carried out using HSPICE in the Global Foundry 0.18 μm process. Monte Carlo analysis shows that the CMS-bias with proposed bias circuit （CMS-proposed） and the CMS-bias with original circuit （CMS-original） have the same robustness against the variation, but the former offer a 9% reduction in power consumption. The process corner analysis shows that the average power and delay of the CMS-proposed don＇t change much in different process corners, especially in FS and SF corner. In addition, parameter sensitivity analysis shows that the process variation in long wires has little influence on the delay of the CMS scheme, but the variation in the effective length of MOSFETs influences the performance of the CMS scheme very much.展开更多
In this paper, on-chip interconnects are modeled as distributed parameter RLCG transmission lines, based on which the matrix ABCD of interconnects is deduced. With help of the ABCD matrix, a voltage transfer function ...In this paper, on-chip interconnects are modeled as distributed parameter RLCG transmission lines, based on which the matrix ABCD of interconnects is deduced. With help of the ABCD matrix, a voltage transfer function of an interconnect system, consisting of a driver, interconnect line and load, is obtained analytically in the form of a transcendental function, and it is reduced to a finite order system based on high order Pade approximation. With the reduced-order transfer function, response waveforms with step input can be obtained, and signal delay can be calculated consequently. Two numerical experiments are conducted to demonstrate its efficiency.展开更多
The single-walled carbon nanotube （SWCNT） is a promising nanostructure in the design of future high- frequency system-on-chip, especially in network-on-chip, where the quality of communication between intellectual p...The single-walled carbon nanotube （SWCNT） is a promising nanostructure in the design of future high- frequency system-on-chip, especially in network-on-chip, where the quality of communication between intellectual property （IP） modules is a major concern. Shrinking dimensions of circuits and systems have restricted the use of high-frequency signal characteristics for frequencies up to 1000 GHz. Four key electrical parameters, impedance, propagation constant, current density, and signal delay time, which are crucial in the design of a high-quality interconnect, are derived for different structural configurations of SWCNT. Each of these parameters exhibits strong dependence on the frequency range over which the interconnect is designed to operate, as well as on the configuration of SWCNT. The novelty of the proposed model for solving next-generation high-speed integrated circuit （IC） interconnect challenges is illustrated, compared with existing theoretical and experimental results in the literature.展开更多
Microbatteries(MBs)are crucial to power miniaturized devices for the Internet of Things.In the evolutionary journey of MBs,fabrication technology emerges as the cornerstone,guiding the intricacies of their configurati...Microbatteries(MBs)are crucial to power miniaturized devices for the Internet of Things.In the evolutionary journey of MBs,fabrication technology emerges as the cornerstone,guiding the intricacies of their configuration designs,ensuring precision,and facilitating scalability for mass production.Photolithography stands out as an ideal technology,leveraging its unparalleled resolution,exceptional design flexibility,and entrenched position within the mature semiconductor industry.However,comprehensive reviews on its application in MB development remain scarce.This review aims to bridge that gap by thoroughly assessing the recent status and promising prospects of photolithographic microfabrication for MBs.Firstly,we delve into the fundamental principles and step-by-step procedures of photolithography,offering a nuanced understanding of its operational mechanisms and the criteria for photoresist selection.Subsequently,we highlighted the specific roles of photolithography in the fabrication of MBs,including its utilization as a template for creating miniaturized micropatterns,a protective layer during the etching process,a mold for soft lithography,a constituent of MB active component,and a sacrificial layer in the construction of micro-Swiss-roll structure.Finally,the review concludes with a summary of the key challenges and future perspectives of MBs fabricated by photolithography,providing comprehensive insights and sparking research inspiration in this field.展开更多
Propelled by the rise of artificial intelligence,cloud services,and data center applications,next-generation,low-power,local-oscillator-less,digital signal processing(DSP)-free,and short-reach coherent optical communi...Propelled by the rise of artificial intelligence,cloud services,and data center applications,next-generation,low-power,local-oscillator-less,digital signal processing(DSP)-free,and short-reach coherent optical communication has evolved into an increasingly prominent area of research in recent years.Here,we demonstrate DSP-free coherent optical transmission by analog signal processing in frequency synchronous optical network(FSON)architecture,which supports polarization multiplexing and higher-order modulation formats.The FSON architecture that allows the numerous laser sources of optical transceivers within a data center can be quasi-synchronized by means of a tree-distributed homology architecture.In conjunction with our proposed pilot-tone assisted Costas loop for an analog coherent receiver,we achieve a record dual-polarization 224-Gb/s 16-QAM 5-km mismatch transmission with reset-free carrier phase recovery in the optical domain.Our proposed DSP-free analog coherent detection system based on the FSON makes it a promising solution for next-generation,low-power,and high-capacity coherent data center interconnects.展开更多
Coupled-waveguide devices are essential in photonic integrated circuits for coupling,polarization handling,and mode manipulation.However,the performance of these devices usually suffers from high wavelength and struct...Coupled-waveguide devices are essential in photonic integrated circuits for coupling,polarization handling,and mode manipulation.However,the performance of these devices usually suffers from high wavelength and structure sensitivity,which makes it challenging to realize broadband and reliable on-chip optical functions.Recently,topological pumping of edge states has emerged as a promising solution for implementing robust optical couplings.In this paper,we propose and experimentally demonstrate broadband on-chip mode manipulation with very large fabrication tolerance based on the Rice–Mele modeled silicon waveguide arrays.The Thouless pumping mechanism is employed in the design to implement broadband and robust mode conversion and multiplexing.The experimental results prove that various mode-order conversions with low insertion losses and intermodal crosstalk can be achieved over a broad bandwidth of 80 nm ranging from 1500 to 1580 nm.Thanks to such a topological design,the device has a remarkable fabrication tolerance of±70 nm for the structural deviations in waveguide width and gap distance,which is,to the best of our knowledge,the highest among the coupled-waveguide mode-handling devices reported so far.As a proof-of-concept experiment,we cascade the topological mode-order converters to form a four-channel mode-division multiplexer and demonstrate the transmission of a 200-Gb/s 16-quadrature amplitude modulation signal for each mode channel,with the bit error rates below the 7%forward error correction threshold of 3.8×10^(-3).We reveal the possibility of developing new classes of broadband and fabrication-tolerant coupled-waveguide devices with topological photonic approaches,which may find applications in many fields,including optical interconnects,quantum communications,and optical computing.展开更多
Industrial intelligence and secure interconnection serve as the foundational platform and critical information infrastructure for new industrialization,carrying significant strategic importance.They not only function ...Industrial intelligence and secure interconnection serve as the foundational platform and critical information infrastructure for new industrialization,carrying significant strategic importance.They not only function as the core engine driving the transformation and upgrading of the manufacturing sector and ensuring stable socioeconomic operation but are also vital to enhancing national technological competitiveness and safeguarding industrial security.展开更多
With the rapid development of network technologies,a large number of deployed edge devices and information systems generate massive amounts of data which provide good support for the advancement of data-driven intelli...With the rapid development of network technologies,a large number of deployed edge devices and information systems generate massive amounts of data which provide good support for the advancement of data-driven intelligent models.However,these data often contain sensitive information of users.Federated learning(FL),as a privacy preservation machine learning setting,allows users to obtain a well-trained model without sending the privacy-sensitive local data to the central server.Despite the promising prospect of FL,several significant research challenges need to be addressed before widespread deployment,including network resource allocation,model security,model convergence,etc.In this paper,we first provide a brief survey on some of these works that have been done on FL and discuss the motivations of the Communication Networks(CNs)and FL to mutually enable each other.We analyze the support of network technologies for FL,which requires frequent communication and emphasizes security,as well as the studies on the intelligence of many network scenarios and the improvement of network performance and security by the methods based on FL.At last,some challenges and broader perspectives are explored.展开更多
A new on-chip light source configuration has been proposed,which utilizes the interaction between a microwave or laser and a dielectric nanopillar array to generate a periodic electromagnetic near-field and applies pe...A new on-chip light source configuration has been proposed,which utilizes the interaction between a microwave or laser and a dielectric nanopillar array to generate a periodic electromagnetic near-field and applies periodic transverse acceleration to relativistic electrons to generate high-energy photon radiation.The dielectric nanopillar array interacting with the driving field acts as an electron undulator,in which the near-field drives electrons to oscillate.When an electron beam propagates through this nanopillar array in this light source configuration,it is subjected to a periodic transverse near-field force and will radiate X-ray or evenγ-ray high-energy photons after a relativistic frequency up-conversion.Compared with the undulator which is based on the interaction between strong lasers and nanostructures to generate a plasmonic near-field,this configuration is less prone to damage during operation.展开更多
Nano-twinned copper(nt-Cu),with a preferred orientation,is highly promising as interconnect materials in high-density advanced packaging due to its considerable mechanical strength,excellent electrical conductivity,an...Nano-twinned copper(nt-Cu),with a preferred orientation,is highly promising as interconnect materials in high-density advanced packaging due to its considerable mechanical strength,excellent electrical conductivity,and resistance to thermal migration.However,its application is impeded by sulfur-containing byproducts from the electroplating process,exacerbating the formation of Kirkendall voids within solder joints during thermal aging.Herein,through the incorporation of Zinc(Zn)into the nt-Cu layer,we develop a nt-Cu/Zn composite structure.Our findings provide the first definitive confirmation of the mechanism by which sulfur atoms migrate to the Cu_(3)Sn/nt-Cu interface through interstitial diffusion,thereby reducing the activation energy for vacancy formation.We further demonstrate that Zn effectively an-choring sulfur atoms,forming ZnS within the nt-Cu layer during heat treatment,which increases the vacancy formation energy and inhibits the development of Kirkendall voids.Remarkably,no Kirkendall voids are observed in the modified interconnects even after prolonged aging at 150℃ for 1000 h.The nt-Cu/Zn composite metallization layers significantly decrease the growth rate of interfacial intermetallic compounds by 33.6% and enhance the shear strength of solder interconnections to 228.9%.This research underscores the potential of nt-Cu in advanced electronic packaging,offering new pathways for improving the power density and reliability of electronic devices.展开更多
文摘This paper presents introduction for a QoS verification of on-chip interconnection based on the new progress of the industry, which combined with an AMD processor chip design for big data. Some verification experience in architectural modeling and simulation of on-chip interconnection is also introduced in this paper.
基金Supported by the National Natural Science Foundation of China under Grant No 60977043the National High-Technology Research and Development Program of China under Grant No 2012AA012203,and Tang Zhongyin Fund.
文摘A channel-selectable optical link based on a silicon microring resonator is proposed and demonstrated.This optical link consists of the wavelength-tunable microring modulators and the filters,defined on a silicon-on-insulator(SOI)platform.With a p–i–n junction embedded in the microring modulator,light at the resonant wavelength of the ring resonator is modulated.The 2^(nd)-order microring add-drop filter routes the modulated light.The channel selectivity is demonstrated by heating the microrings.With a thermal tuning efficiency of 5.9 mW/nm,the filter drop port response was successfully tuned with 0.8 nm channel spacing.We also show that modulation can be achieved in these channels.This device aims to offer flexibility and increase the bandwidth usage efficiency in optical interconnection.
基金support from USA NSF(Grant No.OPP2213875)NASA(Grant No.80NSSC22K1707).
文摘The IUGG Associations for Atmosphere,Oceans and Cryosphere—IAMAS,IAPSO and IACS—held a Joint Scientific Assembly in Busan,South Korea,from 20 to 25 July 2025.This was the first joint assembly of all three associations since 2009,when they met in Montreal,Canada.It was the first time any of the associations had been hosted in Korea,and it had been two decades since any of them had met in Asia.The choice of Busan as the venue supported high levels of participation and smooth conference operations.The Local Organizing Committee,chaired by Prof.Kyung-Ja Ha of Pusan National University,oversaw the successful organization of the event.The assembly brought together 1725 participants in total,including 1282 researchers and 443 invited participants and individuals involved in side events,exhibitions,media coverage,and volunteer work.Participants came from 46 countries across Asia,Europe,North America,South America,Africa,and Oceania.IAMAS had 736 participants,IAPSO 321,and IACS 225.Survey data from 951 respondents revealed that Early Career Scientists,defined as those within 10 years of receiving their PhD,accounted for approximately 25%of participants.The demographic profile skewed young,with 66%of attendees in their 20s and 30s.The scientific program was organized by Prof.Seon-Ki Park(Chair),the Secretaries General from all three Associations,and the Local Organizing Committee.Reflecting the theme“Our Interconnected Earth,”the scientific program emphasized integrated approaches to climate systems,addressing climate change and environmental challenges through collaborative,transdisciplinary research.
基金financial support from the National Natural Science Foundation of China (Nos.82473887 and 21927808)the Scientific and Technological Innovation Program of Shanghai (No.23DZ2202500)the CAMS Innovation Fund for Medical Sciences (No.2021-1-I2M-026)。
文摘The brain's functions are governed by molecular metabolic networks.However,due to the sophisticated spatial organization and diverse activities of the brain,characterizing both the minute and large-scale metabolic activity across the entire brain and its numerous micro-regions remains incredibly challenging.Here,we offer a high-definition spatially resolved metabolomics technique to better understand the metabolic specialization and interconnection throughout the mouse brain using improved ambient mass spectrometry imaging.This method allows for the simultaneous mapping of thousands of metabolites at a 30 μm spatial resolution across the mouse brain,ranging from structural lipids to functional neurotransmitters.This approach effectively reveals the distribution patterns of delicate microregions and their distinctive metabolic characteristics.Using an integrated database,we annotated 259 metabolites,demonstrating that the metabolome and metabolic pathways are unique to each brain microregion.The distribution of metabolites,closely linked to functionally connected brain regions and their interactions,offers profound insights into the complexity of chemical processes and their roles in brain function.An initial dataset for future metabolomics research might be obtained from the high-definition mouse brain's spatial metabolome atlas.
文摘As circuit feature sizes approach the nanoscale,traditional Copper(Cu)interconnects face significant hurdles posed by rising resistance-capacitance(RC)delay,electromigration,and high power dissipation.These limitations impose constraints on the scalability and reliability of future semiconductor technologies.Our paper describes the new Vertical multilayer Aluminium Boron Nitride Nanoribbon(AlBN)interconnect structure,integrated with Density functional theory(DFT)using first-principles calculations.This study explores AlBN-based nanostructures with doping of 1Cu,2Cu,1Fe(Iron),and 2Fe for the application of Very Large Scale Integration(VLSI)interconnects.The AlBN structure utilized the advantages of vertical multilayer interconnects to both reduce the RC delay while enhancing signal integrity.Key parameters like Fermi energy,bandgap,binding energy,conduction channels,quantum resistance,and RC delay were analyzed.Through modeling and large-scale simulation,the structural,electronic,and stability attributes of the AlBN interconnects are analyzed,and the results illustrate considerable improvements in signal propagation against Cu interconnect structures.These findings confirm the tunable,high-performance nature of AlBN-2Fe,making it a promising candidate for future high-speed,low-power VLSI interconnect technologies.We demonstrated an advanced energy-efficient interconnect that can be easily scaled for future nanoscale VLSI circuit design and gives rise to a next generation of viable interconnect technology for high-capacity,high-speed,reliable semiconductor technology.
基金supported by the key technology project of China Southern Power Grid Corporation(GZKJXM20220041)partly by the National Key Research and Development Plan(2022YFE0205300).
文摘This paper presents an optimal operation method for embedded DC interconnections based on low-voltage AC/DC distribution areas(EDC-LVDA)under three-phase unbalanced compensation conditions.It can optimally determine the transmission power of the DC and AC paths to simultaneously improve voltage quality and reduce losses.First,considering the embedded interconnected,unbalanced power structure of the distribution area,a power flow calculation method for EDC-LVDA that accounts for three-phase unbalanced compensation is introduced.This method accurately describes the power flow distribution characteristics under both AC and DC power allocation scenarios.Second,an optimization scheduling model for EDC-LVDA under three-phase unbalanced conditions is developed,incorporating network losses,voltage quality,DC link losses,and unbalance levels.The proposed model employs an improved particle swarm optimization(IPSO)two-layer algorithm to autonomously select different power allocation coefficients for the DC link and AC section under various operating conditions.This enables embedded economic optimization scheduling while maintaining compensation for unbalanced conditions.Finally,a case study based on the IEEE 13-node system for EDC-LVDA is conducted and tested.The results show that the proposed optimal operation method achieves a 100%voltage compliance rate and reduces network losses by 13.8%,while ensuring three-phase power balance compensation.This provides a practical solution for the modernization and upgrading of low-voltage power grids.
基金supported by the Science Center Program of National Natural Science Foundation of China under Grant 62188101the National Natural Science Foundation of China under Grant 62573265.
文摘This study develops an event-triggered control strategy utilizing the fully actuated system approach for nonlinear interconnected large-scale systems containing actuator failures.First,to reduce the complexity of the design process,we transform the studied system into the form of a fully actuated system through a state transformation.Then,to address the unknown nonlinear functions and actuator fault parameters,we employ neural networks and adaptive estimation techniques,respectively.Moreover,to reduce the control cost and improve the control efficiency,we introduce event-triggered inputs into the control strategy.It is proved by the Lyapunov stability analysis that all signals of the closed-loop system are bounded and the output of system eventually converge to a bounded region.The efficacy of the control approach is ultimately demonstrated via the simulation of an actual machine feeding system.
文摘We propose a unidirectional emission silicon/ III-V laser, which comprises an III-V quantum wells microdisk connected to an output waveguide and a siliconon-insulator （SOI） waveguide. Characteristics of the III-V microdisk with an output waveguide and mode coupling between the III-V output waveguide and the SO1 waveguide are investigated by three-dimensional （3D） finite-difference time-domain （FDTD） method. Simulation results show that the Q factor of a coupled mode for a 7.5 μm diameter microdisk connected to a 0.5 μm wide output waveguide is about 8.5×10^4. And the coupling efficiency between the III-V output waveguide and the SO1 waveguide is over 96% when the III-V waveguide width is 0.5 μm, the SO1 waveguide width is 0.565 μm and the vertical gap between those two waveguides is 0.1μm. The proposed hybrid laser would be of valuable applications for on-chip interconnects.
基金supported by the Natural National Science Foundation of China(Nos.61235001,61575187,61535002)
文摘The silicon microring resonator plays an important role in large-scale,high-integrability modern switching matrixes and optical networks,as silicon photonics enables ring resonators of an unprecedented compact size.But as the nature of resonators is their sensitivity to temperature,their performances are vulnerable to being affected by thermal effect.In this paper,we analyze the dominant thermal effects to the application of silicon microring optical switch.On the one hand we theoretically analyze and experimentally measure the thermal crosstalk among adjacent microring optical switches with different distances,and give possible solutions to minimize the affect of thermal crosstalk.On the other hand we analyze and measure the thermooptic dynamic response of microring switch;the experiment shows for the thermal-tuning that the rising edge is around 2/is,and the falling edge is around 35 μs.We give the explanation of the asymmetric rise-time and fall-time.
基金Supported by the National Basic Research Program of China under Grant No 2012CB933501the National Natural Science Foundation of China under Grant Nos 61307033,61274070,61137003 and 61321063
文摘A single mode hybrid Ⅲ-Ⅴ/silicon on-chip laser based on the flip-chip bonding technology for on-chip optical interconnection is demonstrated. A single mode Fabry-Perot laser structure with micro-structures on an InP ridge waveguide is designed and fabricated on an InP/AIGaInAs multiple quantum well epitaxial layer structure wafer by using i-line lithography. Then, a silicon waveguide platform including a laser mounting stage is designed and fabricated on a silicon-on-insulator substrate. The single mode laser is flip-chip bonded on the laser mounting stage. The lasing light is butt-coupling to the silicon waveguide. The laser power output from a silicon waveguide is 1.3roW, and the threshold is 37mA at room temperature and continuous wave operation.
文摘We propose a novel bias circuit, which can help a promising current-mode signaling （CMS） scheme （CMS-bias） enhance the robustness against process variation but consume less energy than the original bias circuit in this scheme. Monte Carlo and process corner analysis are carried out using HSPICE in the Global Foundry 0.18 μm process. Monte Carlo analysis shows that the CMS-bias with proposed bias circuit （CMS-proposed） and the CMS-bias with original circuit （CMS-original） have the same robustness against the variation, but the former offer a 9% reduction in power consumption. The process corner analysis shows that the average power and delay of the CMS-proposed don＇t change much in different process corners, especially in FS and SF corner. In addition, parameter sensitivity analysis shows that the process variation in long wires has little influence on the delay of the CMS scheme, but the variation in the effective length of MOSFETs influences the performance of the CMS scheme very much.
基金supported by the National Natural Science Foundation of China (No.60574082)
文摘In this paper, on-chip interconnects are modeled as distributed parameter RLCG transmission lines, based on which the matrix ABCD of interconnects is deduced. With help of the ABCD matrix, a voltage transfer function of an interconnect system, consisting of a driver, interconnect line and load, is obtained analytically in the form of a transcendental function, and it is reduced to a finite order system based on high order Pade approximation. With the reduced-order transfer function, response waveforms with step input can be obtained, and signal delay can be calculated consequently. Two numerical experiments are conducted to demonstrate its efficiency.
文摘The single-walled carbon nanotube （SWCNT） is a promising nanostructure in the design of future high- frequency system-on-chip, especially in network-on-chip, where the quality of communication between intellectual property （IP） modules is a major concern. Shrinking dimensions of circuits and systems have restricted the use of high-frequency signal characteristics for frequencies up to 1000 GHz. Four key electrical parameters, impedance, propagation constant, current density, and signal delay time, which are crucial in the design of a high-quality interconnect, are derived for different structural configurations of SWCNT. Each of these parameters exhibits strong dependence on the frequency range over which the interconnect is designed to operate, as well as on the configuration of SWCNT. The novelty of the proposed model for solving next-generation high-speed integrated circuit （IC） interconnect challenges is illustrated, compared with existing theoretical and experimental results in the literature.
基金supported by the National Natural Science Foundation of China(22125903,22439003,22209175)the National Key R&D Program of China(Grant 2022YFA1504100,2023YFB4005204)+1 种基金the Energy Revolution S&T Program of Yulin Innovation Institute of Clean Energy(Grant E412010508)the State Key Laboratory of Catalysis(No:2024SKL-A-001)。
文摘Microbatteries(MBs)are crucial to power miniaturized devices for the Internet of Things.In the evolutionary journey of MBs,fabrication technology emerges as the cornerstone,guiding the intricacies of their configuration designs,ensuring precision,and facilitating scalability for mass production.Photolithography stands out as an ideal technology,leveraging its unparalleled resolution,exceptional design flexibility,and entrenched position within the mature semiconductor industry.However,comprehensive reviews on its application in MB development remain scarce.This review aims to bridge that gap by thoroughly assessing the recent status and promising prospects of photolithographic microfabrication for MBs.Firstly,we delve into the fundamental principles and step-by-step procedures of photolithography,offering a nuanced understanding of its operational mechanisms and the criteria for photoresist selection.Subsequently,we highlighted the specific roles of photolithography in the fabrication of MBs,including its utilization as a template for creating miniaturized micropatterns,a protective layer during the etching process,a mold for soft lithography,a constituent of MB active component,and a sacrificial layer in the construction of micro-Swiss-roll structure.Finally,the review concludes with a summary of the key challenges and future perspectives of MBs fabricated by photolithography,providing comprehensive insights and sparking research inspiration in this field.
基金supported by the National Natural Science Foundation of China(Grant Nos.62405250 and 62471404)the China Postdoctoral Science Foundation(Grant No.2024M762955)+1 种基金the Key Project of Westlake Institute for Optoelectronics(Grant No.2023GD003)the Optical Com-munication and Sensing Laboratory,School of Engineering,Westlake University.
文摘Propelled by the rise of artificial intelligence,cloud services,and data center applications,next-generation,low-power,local-oscillator-less,digital signal processing(DSP)-free,and short-reach coherent optical communication has evolved into an increasingly prominent area of research in recent years.Here,we demonstrate DSP-free coherent optical transmission by analog signal processing in frequency synchronous optical network(FSON)architecture,which supports polarization multiplexing and higher-order modulation formats.The FSON architecture that allows the numerous laser sources of optical transceivers within a data center can be quasi-synchronized by means of a tree-distributed homology architecture.In conjunction with our proposed pilot-tone assisted Costas loop for an analog coherent receiver,we achieve a record dual-polarization 224-Gb/s 16-QAM 5-km mismatch transmission with reset-free carrier phase recovery in the optical domain.Our proposed DSP-free analog coherent detection system based on the FSON makes it a promising solution for next-generation,low-power,and high-capacity coherent data center interconnects.
基金supported by the National Key R&D Program of China(Grant No.2023YFB2905503)the National Natural Science Foundation of China(Grant Nos.62035016,62105200,62475146,and 62341508).
文摘Coupled-waveguide devices are essential in photonic integrated circuits for coupling,polarization handling,and mode manipulation.However,the performance of these devices usually suffers from high wavelength and structure sensitivity,which makes it challenging to realize broadband and reliable on-chip optical functions.Recently,topological pumping of edge states has emerged as a promising solution for implementing robust optical couplings.In this paper,we propose and experimentally demonstrate broadband on-chip mode manipulation with very large fabrication tolerance based on the Rice–Mele modeled silicon waveguide arrays.The Thouless pumping mechanism is employed in the design to implement broadband and robust mode conversion and multiplexing.The experimental results prove that various mode-order conversions with low insertion losses and intermodal crosstalk can be achieved over a broad bandwidth of 80 nm ranging from 1500 to 1580 nm.Thanks to such a topological design,the device has a remarkable fabrication tolerance of±70 nm for the structural deviations in waveguide width and gap distance,which is,to the best of our knowledge,the highest among the coupled-waveguide mode-handling devices reported so far.As a proof-of-concept experiment,we cascade the topological mode-order converters to form a four-channel mode-division multiplexer and demonstrate the transmission of a 200-Gb/s 16-quadrature amplitude modulation signal for each mode channel,with the bit error rates below the 7%forward error correction threshold of 3.8×10^(-3).We reveal the possibility of developing new classes of broadband and fabrication-tolerant coupled-waveguide devices with topological photonic approaches,which may find applications in many fields,including optical interconnects,quantum communications,and optical computing.
文摘Industrial intelligence and secure interconnection serve as the foundational platform and critical information infrastructure for new industrialization,carrying significant strategic importance.They not only function as the core engine driving the transformation and upgrading of the manufacturing sector and ensuring stable socioeconomic operation but are also vital to enhancing national technological competitiveness and safeguarding industrial security.
基金supported by National Key Research and Development Program of China(No.2023YFB2704200)Beijing Natural Science Foundation(No.4254064).
文摘With the rapid development of network technologies,a large number of deployed edge devices and information systems generate massive amounts of data which provide good support for the advancement of data-driven intelligent models.However,these data often contain sensitive information of users.Federated learning(FL),as a privacy preservation machine learning setting,allows users to obtain a well-trained model without sending the privacy-sensitive local data to the central server.Despite the promising prospect of FL,several significant research challenges need to be addressed before widespread deployment,including network resource allocation,model security,model convergence,etc.In this paper,we first provide a brief survey on some of these works that have been done on FL and discuss the motivations of the Communication Networks(CNs)and FL to mutually enable each other.We analyze the support of network technologies for FL,which requires frequent communication and emphasizes security,as well as the studies on the intelligence of many network scenarios and the improvement of network performance and security by the methods based on FL.At last,some challenges and broader perspectives are explored.
基金pported by the National Natural Science Foundation of China(Grant Nos.12325409,12388102,12074398,and U2267204)the CAS Project for Young Scientists in Basic Research(Grant No.YSBR-060)the Shanghai Pilot Program for Basic Research,Chinese Academy of Sciences Shanghai Branch。
文摘A new on-chip light source configuration has been proposed,which utilizes the interaction between a microwave or laser and a dielectric nanopillar array to generate a periodic electromagnetic near-field and applies periodic transverse acceleration to relativistic electrons to generate high-energy photon radiation.The dielectric nanopillar array interacting with the driving field acts as an electron undulator,in which the near-field drives electrons to oscillate.When an electron beam propagates through this nanopillar array in this light source configuration,it is subjected to a periodic transverse near-field force and will radiate X-ray or evenγ-ray high-energy photons after a relativistic frequency up-conversion.Compared with the undulator which is based on the interaction between strong lasers and nanostructures to generate a plasmonic near-field,this configuration is less prone to damage during operation.
基金financially supported by National Natural Science Foundation of China(No.U2241223)Pre-Research Foundation of China(No.909010203-202).
文摘Nano-twinned copper(nt-Cu),with a preferred orientation,is highly promising as interconnect materials in high-density advanced packaging due to its considerable mechanical strength,excellent electrical conductivity,and resistance to thermal migration.However,its application is impeded by sulfur-containing byproducts from the electroplating process,exacerbating the formation of Kirkendall voids within solder joints during thermal aging.Herein,through the incorporation of Zinc(Zn)into the nt-Cu layer,we develop a nt-Cu/Zn composite structure.Our findings provide the first definitive confirmation of the mechanism by which sulfur atoms migrate to the Cu_(3)Sn/nt-Cu interface through interstitial diffusion,thereby reducing the activation energy for vacancy formation.We further demonstrate that Zn effectively an-choring sulfur atoms,forming ZnS within the nt-Cu layer during heat treatment,which increases the vacancy formation energy and inhibits the development of Kirkendall voids.Remarkably,no Kirkendall voids are observed in the modified interconnects even after prolonged aging at 150℃ for 1000 h.The nt-Cu/Zn composite metallization layers significantly decrease the growth rate of interfacial intermetallic compounds by 33.6% and enhance the shear strength of solder interconnections to 228.9%.This research underscores the potential of nt-Cu in advanced electronic packaging,offering new pathways for improving the power density and reliability of electronic devices.
