Oil-soluble MoS2 nanoparticles with narrow size distribution have been synthesized by a facile composite-surfactants-aided-solvothermal process.The as-prepared nanoparticles can be directly used as hydrogenation nanoc...Oil-soluble MoS2 nanoparticles with narrow size distribution have been synthesized by a facile composite-surfactants-aided-solvothermal process.The as-prepared nanoparticles can be directly used as hydrogenation nanocatalysts or as precursors to achieve efficient supported nanocatalysts.The surfaces of these nanoparticles are proposed to be encapsulated within a layer of organic modifiers,which are responsible for the enhancement of their solubility in organic solvents.The activated-carbon supported MoS2 nanocatalysts exhibit higher activity than the unsupported ones towards hydrogenation reactions of naphthalene,owing to the synergistic effects between nanoparticles and supports.The advantages of the present nanocatalysts,such as removal of conventional presulfiding requirements and reduction of nanoparticle aggregations,make them become promising applications in related petroleum chemical industry.展开更多
Aiming at the problems of insufficient activity and selectivity of Cu-based catalysts in CO_(2)hydrogenation to methanol,Al_(2)O_(3),ZrO_(2)and CeO_(2)modified Cu-ZnO catalysts by the co-precipitation method were prep...Aiming at the problems of insufficient activity and selectivity of Cu-based catalysts in CO_(2)hydrogenation to methanol,Al_(2)O_(3),ZrO_(2)and CeO_(2)modified Cu-ZnO catalysts by the co-precipitation method were prepared,and the influence mechanism of additives on the structure-performance relationship of the catalysts was systematically explored.Through a variety of characterization methods such as XRD,N2 physical adsorption-desorption,TEM,H_(2)-TPR,CO_(2)-TPD and XPS,combined with catalytic performance evaluation experiments,the correlation between the microstructure of catalysts and the reaction performance of CO_(2)hydrogenation to methanol was analyzed in depth.The results show that metal additives significantly improve the performance of catalysts.After the introduction of additives,the specific surface area and pore volume of the catalysts increase,the grain size of Cu decreases,and its dispersion improves.The Ce-modified CZC catalyst exhibited the best performance,with the grain size of CuO as small as 11.41 nm,and the surface oxygen vacancy concentration(OⅡ/OⅠ=3.15)was significantly higher than that of other samples.The reaction performance test shows that under the conditions of 2.8 MPa,8000 h−1 and 280℃,the CO_(2)conversion of the CZC catalyst reached 18.83%,the methanol selectivity was 68.40%,and the methanol yield was 12.88%,all of which are superior to other catalysts.Its excellent performance can be attributed to the fact that CeO_(2)enhances the metal-support interaction,increases the surface basicity,promotes the adsorption and activation of CO_(2),and simultaneously inhibits the reverse water-gas shift side reaction.This study clarifies the structure-activity regulation mechanism of additive modification on Cu-ZnO catalysts,providing a theoretical basis and technical reference for the development of efficient catalysts for CO_(2)hydrogenation to methanol.展开更多
Under the backdrop of“Carbon Peak and Carbon Neutrality”(dual carbon)goal in China,the methane-carbon dioxide reforming reaction has attracted considerable attention due to its environmental benefits of converting t...Under the backdrop of“Carbon Peak and Carbon Neutrality”(dual carbon)goal in China,the methane-carbon dioxide reforming reaction has attracted considerable attention due to its environmental benefits of converting two greenhouse gases(methane and carbon dioxide)into syngas and its promising industrial applications.Nickel(Ni)-based catalysts,with high catalytic activity,low cost,and abundant resources,are considered ideal candidates for industrial applications.In this article,three reaction kinetic models were briefly introduced,namely the Power-Law(PL)model,the Eley-Rideal(ER)model,and the Langmuir-Hinshelwood-Hougen-Watson(LHHW)model.Based on the LHHW model,the reaction kinetics and mechanisms of different catalytic systems were systematically discussed,including the properties of supports,the doping of noble metals and transition metals,the role of promoters,and the influence of the geometric and electronic structures of Ni on the reaction mechanism.Furthermore,the kinetics of carbon deposition and elimination on various catalysts were analyzed.Based on the reaction rate expressions for carbon elimination,the reasons for the high activity of transition metal iron(Fe)-doped catalysts and core-shell structured catalysts in carbon elimination were explained.Based on the detailed collation and comparative analysis of the reaction mechanisms and kinetic characteristics across diverse Ni-based catalytic systems,a theoretical guidance for the designing of high-performance catalysts was provided in this work.展开更多
Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen e...Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.展开更多
To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content ...To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.展开更多
Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon...Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.展开更多
Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catal...Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catalysts,but which substantially involve multi-step,tedious,and difficult synthesis.Herein,this study reports an intriguing approach to construct multi-nuclear catalysts for the milestoneα-diimine nickel catalysts using an oligomeric strategy.A polymerizable norbornene unit is incorporated into theα-diimine ligand backbone,leading to the formation of the monomeric nickel catalyst Ni_(1)and its corresponding oligomeric nickel catalysts(Ni_(3)and Ni_(5))with varying degrees of polymerization(DP=3 and 5).Notably,the oligomeric catalyst Ni_(5)was facilely scaled up(50 g-level),showed enhanced thermal stability,exhibited 4.6 times higher activity,and yielded polyethylene elastomer with a 379%increased molecular weight in ethylene polymerization,compared to the monomeric catalyst Ni_(1).Catalytic performance enhancements of oligomeric catalysts were found to be DP-dependent.The kilogram-scale polyethylene,produced using Ni_(5)in a 20 L reactor,presented a highly branched all-hydrocarbon structure,which demonstrated typical elastic properties(tensile strength:4 MPa,elastic recovery:SR=72%)along with great processability(MFI=3.0 g/10 min),insulating characteristics(volume resistivity=2×10^(16)Ω/m),and hydrophobicity(water vapor permeability:0.03 g/m^(2)/day),suggesting potentially practical applications.展开更多
Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction...Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.展开更多
Lithium-sulfur(Li-S)batteries boast a theoretical energy density as high as 2600 Wh·kg^(−1),positioning them as a highly attractive option for future advanced energy storage systems.Challenges such as slow transf...Lithium-sulfur(Li-S)batteries boast a theoretical energy density as high as 2600 Wh·kg^(−1),positioning them as a highly attractive option for future advanced energy storage systems.Challenges such as slow transformation kinetics and shuttle effects associated with lithium polysulfides(LiPSs)have seriously hindered their practical applications.In this paper,we present a new method for the synthesis of hollow carbon-sphere-supported Co monatomic catalysts(Co-N-C).This new synthesis method achieves pyrolytic coordination using a precursor rich in imide(-RC=N-)polymers.This synthesis method not only improves the adsorbability and catalytic activity of LiPS but also significantly weakens the shuttle effect and generates Co-N-C with superior conductivity,abundant hollow structures,and a high specific surface area,thus efficiently capturing and restricting the movement of LiPS intermediates.The dispersed Co monoatomic catalysts(Co SACs)were anchored to a highly conductive nitrogen-doped carbon framework and exhibited symmetric N-coordination active sites(Co-N_(4))to ensure fast redox kinetics of LiPS and Li_(2)S_(2)/Li_(2)S solid-state products.The lithium-sulfur battery with Co-N-C as the sulfur carrier showed excellent discharging capacity of 1146.6 mAh·g^(−1) at a discharge rate of 0.5 C and maintained excellent performance at a high discharge rate of 2 C.The capacity decay rate in 500 cycles was only 0.086%per cycle,reflecting excellent long-term cycle stability.This study highlights the key role of the synergistic effect between single-atom cobalt catalysts and hollow carbon spheres in enhancing the efficiency of lithium-sulfur(Li-S)batteries.It also provides valuable insights into the construction and fabrication of highly active monatomic catalysts.The catalytic conversion efficiency of lithium polysulfides is significantly enhanced when embedded in hollow carbon architectures,which serves as a critical strategy for optimizing the electrochemical behavior of next-generation Li-S batteries.展开更多
High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environm...High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environments,tunable electronic structures,abundant unsaturated active sites,and dynamic structural reassembly—collectively enhance electrochemical activity and durability under operating conditions.This review summarizes recent advances in HEACs for hydrogen evolution,oxygen evolution,and overall water splitting,highlighting their disorder-driven advantages over crystalline counterparts.Catalytic performance benchmarks are presented,and mechanistic insights are discussed,focusing on how multimetallic synergy,amorphization effect,and in‐situ reconstruction cooperatively regulate reaction pathways.These insights provide guidance for the rational design of next‐generation amorphous high‐entropy electrocatalysts with improved efficiency and durability.展开更多
Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespr...Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespread attention for CO_(2)RR due to their high catalytic activity,selectivity,excellent stability,and low cost.However,they still need to be further improved to meet the needs of industrial applications.This review article comprehensively summarizes the recent advances in regulation strategies of Bi-based catalysts and can be divided into six categories:(1)defect engineering,(2)atomic doping engineering,(3)organic framework engineering,(4)inorganic heterojunction engineering,(5)crystal face engineering,and(6)alloying and polarization engineering.Meanwhile,the corresponding catalytic mechanisms of each regulation strategy will also be discussed in detail,aiming to enable researchers to understand the structure-property relationship of the improved Bibased catalysts fundamentally.Finally,the challenges and future opportunities of the Bi-based catalysts in the photoelectrocatalytic CO_(2)RR application field will also be featured from the perspectives of the(1)combination or synergy of multiple regulatory strategies,(2)revealing formation mechanism and realizing controllable synthesis,and(3)in situ multiscale investigation of activation pathways and uncovering the catalytic mechanisms.On the one hand,through the comparative analysis and mechanism explanation of the six major regulatory strategies,a multidimensional knowledge framework of the structure-activity relationship of Bi-based catalysts can be constructed for researchers,which not only deepens the atomic-level understanding of catalytic active sites,charge transport paths,and the adsorption behavior of intermediate products,but also provides theoretical guiding principles for the controllable design of new catalysts;on the other hand,the promising collaborative regulation strategies,controllable synthetic paths,and the in situ multiscale characterization techniques presented in this work provides a paradigm reference for shortening the research and development cycle of high-performance catalysts,conducive to facilitating the transition of photoelectrocatalytic CO_(2)RR technology from the laboratory routes to industrial application.展开更多
To reduce the viscosity of highly-viscous oil of the Tahe oilfield （Xinjiang,China）,an oilsoluble polybasic copolymer viscosity reducer for heavy oil was synthesized using the orthogonal method.The optimum reaction ...To reduce the viscosity of highly-viscous oil of the Tahe oilfield （Xinjiang,China）,an oilsoluble polybasic copolymer viscosity reducer for heavy oil was synthesized using the orthogonal method.The optimum reaction conditions are obtained as follows：under the protection of nitrogen,a reaction time of 9 h,monomer mole ratio of reaction materials of 3：2：2 （The monomers are 2-propenoic acid,docosyl ester,maleic anhydride and styrene,respectively）,initiator amount of 0.8% （mass percent of the sum of all the monomers） and reaction temperature of 80 oC.This synthesized viscosity reducer is more effective than commercial viscosity reducers.The rate of viscosity reduction reached 95.5% at 50 oC.Infrared spectra （IR） and interfacial tensions of heavy oil with and without viscosity reducer were investigated to understand the viscosity reduction mechanism.When viscosity reducer is added,the molecules of the viscosity reducer are inserted amongst the molecules of crude oil,altering the original intermolecular structure of crude oil and weakening its ability to form hydrogen bonds with hydroxyl or carboxyl groups,so the viscosity of crude oil is reduced.Field tests of the newly developed oil-soluble viscosity reducer was carried out in the Tahe Oilfield,and the results showed that 44.5% less light oil was needed to dilute the heavy oil to achieve the needed viscosity.展开更多
A four-ball machine was employed to investigate the tribological performances and the synergetic function of organo-molybdenum compounds (molybdenum dialkyl-dithiophosphate and molybdenum dithiophosphate, coded as MoD...A four-ball machine was employed to investigate the tribological performances and the synergetic function of organo-molybdenum compounds (molybdenum dialkyl-dithiophosphate and molybdenum dithiophosphate, coded as MoDDP and MoDTP, respectively) as additives in liquid paraffin. The morphologies of the worn surfaces and elemental distributions were observed and determined by means of scanning electron microscopy and energy dispersive spectrometry. The chemical states of some typical elements on the worn surface were analyzed on X-ray photoelectron spectroscope. The results show that MoDDP and MoDTP additives in liquid paraffin have excellent antiwear and friction-reduction properties, which are attributed to the reaction film composed of MoS2, FeS and MoO2, and the deposited film composed of phosphate on the worn surface. Moreover, these two additives have synergetic friction-reducing and antiwear effect, which is closely related to the chemical states of S on the worn surface.展开更多
The solubility of initiator determines its distribution and the roles played in emulsion polymerization as well as the final products, but this is still lack of systematic investigation. The present work focuses on th...The solubility of initiator determines its distribution and the roles played in emulsion polymerization as well as the final products, but this is still lack of systematic investigation. The present work focuses on this issue by comparing the kinetic behaviors and product properties of styrene emulsion polymerization initiated by 2,2-azoisobutyronitrile(AIBN) and potassium persulphate(KPS).Compared to KPS-initiated emulsion polymerization, the AIBN-initiated polymerization was found to be insensitive to the type of emulsifier, and have high polymerization rate as well as narrow molecular weight distribution and particle size distribution. This result indicates the effective free radicals are generated in micelles or colloids, which could decrease the proportion of homogeneous nucleation and make the process and product more controllable. As a consequence, there is a linear relationship between molecular weight of product and AIBN concentration in lg-lg coordinate. It provided a reference for the preparation of latexes with specified molecular weight and supported the possibility of the coexistence of multiple free radicals in one micelle or colloid when using oil-soluble initiator.展开更多
Fast phase-transferring was adopted in ethanol solution at the condition of n (oil-soluble tea pol-yphenol): N (As3﹢) = 2:1, 4:1, 6:1, pH = 4.0, temperature 40°C - 45°C, action period of 15 h to compo...Fast phase-transferring was adopted in ethanol solution at the condition of n (oil-soluble tea pol-yphenol): N (As3﹢) = 2:1, 4:1, 6:1, pH = 4.0, temperature 40°C - 45°C, action period of 15 h to compose the target, of which the productivity was 59%, UV was 267.50, 218.00, 220.50 nm, FTIR was 6291, 34158.6, 2850.2, 1708.2;1457.3;1370.4, 1224.2, 1144.0, 760.5 cm﹣1, fluorescence value λmax = 257, 591.1, 593.7, 590.3, 591.0, 591.5, XRD λ/nm is 3.6974, 4.186, 12.0762, 15.4747, 1H-NMRδ = 0.782, 1.193, 1.483 - 1.586, 1.959 - 2.184, 2.479, 3.116, 3.970 - 3.981, 5.231 - 5.753, 6.537 - 7.300. Finally it was ascertained through XRD as double-coordinated polycrystal compound.展开更多
S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB...S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.展开更多
Green hydrogen from water splitting has emerged as a critical energy vector with the potential to spearhead the global transition to a fossil fuel-independent society.The field of catalysis has been revolutionized by ...Green hydrogen from water splitting has emerged as a critical energy vector with the potential to spearhead the global transition to a fossil fuel-independent society.The field of catalysis has been revolutionized by single-atom catalysts(SACs),which exhibit unique and intricate interactions between atomically dispersed metal atoms and their supports.Recently,bimetallic SACs(bimSACs)have garnered significant attention for leveraging the synergistic functions of two metal ions coordinated on appropriately designed supports.BimSACs offer an avenue for rich metal–metal and metal–support cooperativity,potentially addressing current limitations of SACs in effectively furnishing transformations which involve synchronous proton–electron exchanges,substrate activation with reversible redox cycles,simultaneous multi-electron transfer,regulation of spin states,tuning of electronic properties,and cyclic transition states with low activation energies.This review aims to encapsulate the growing advancements in bimSACs,with an emphasis on their pivotal role in hydrogen generation via water splitting.We subsequently delve into advanced experimental methodologies for the elaborate characterization of SACs,elucidate their electronic properties,and discuss their local coordination environment.Overall,we present comprehensive discussion on the deployment of bimSACs in both hydrogen evolution reaction and oxygen evolution reaction,the two half-reactions of the water electrolysis process.展开更多
In this study, the azo red dyes derived from p-n-alkyl aniline by the introduction of different alkyl groups having high solubility in dodecane were synthesized. Results indicated that the elementary properties of red...In this study, the azo red dyes derived from p-n-alkyl aniline by the introduction of different alkyl groups having high solubility in dodecane were synthesized. Results indicated that the elementary properties of red oil inks were 1) non-polarity;2) low viscosity (<3.0 cps);3) specified surface tension (<30 mN/m);4) intensity of visible absorption covering 480 - 540 nm;5) hue close to standard red (CIE(x, y) = 0.67, 0.33). We can conclude that these azo red dyes are applicable for electrowetting displays.展开更多
The pursuit of alternative fuel generation technologies has gained momentum due to the diminishing reserves of fossil fuels and global warming from increased CO_(2)emission.Among the proposed methods,the hydrogenation...The pursuit of alternative fuel generation technologies has gained momentum due to the diminishing reserves of fossil fuels and global warming from increased CO_(2)emission.Among the proposed methods,the hydrogenation of CO_(2)to produce marketable carbon-based products like methanol and ethanol is a practical approach that offers great potential to reduce CO_(2)emissions.Although significant volumes of methanol are currently produced from CO_(2),developing highly efficient and stable catalysts is crucial for further enhancing conversion and selectivity,thereby reducing process costs.An in-depth examination of the differences and similarities in the reaction pathways for methanol and ethanol production highlights the key factors that drive C-C coupling.Identifying these factors guides us toward developing more effective catalysts for ethanol synthesis.In this paper,we explore how different catalysts,through the production of various intermediates,can initiate the synthesis of methanol or ethanol.The catalytic mechanisms proposed by spectroscopic techniques and theoretical calculations,including operando X-ray methods,FTIR analysis,and DFT calculations,are summarized and presented.The following discussion explores the structural properties and composition of catalysts that influence C-C coupling and optimize the conversion rate of CO_(2)into ethanol.Lastly,the review examines recent catalysts employed for selective methanol and ethanol production,focusing on single-atom catalysts.展开更多
With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Ni...With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.展开更多
基金supported by the Shandong Provincial Natural Science Foundation(ZR2009BQ008)the Fundamental Research Funds for the Central Universities(10CX03008A)
文摘Oil-soluble MoS2 nanoparticles with narrow size distribution have been synthesized by a facile composite-surfactants-aided-solvothermal process.The as-prepared nanoparticles can be directly used as hydrogenation nanocatalysts or as precursors to achieve efficient supported nanocatalysts.The surfaces of these nanoparticles are proposed to be encapsulated within a layer of organic modifiers,which are responsible for the enhancement of their solubility in organic solvents.The activated-carbon supported MoS2 nanocatalysts exhibit higher activity than the unsupported ones towards hydrogenation reactions of naphthalene,owing to the synergistic effects between nanoparticles and supports.The advantages of the present nanocatalysts,such as removal of conventional presulfiding requirements and reduction of nanoparticle aggregations,make them become promising applications in related petroleum chemical industry.
基金Supported by National Key R&D Program of China(2022YFA1503400)。
文摘Aiming at the problems of insufficient activity and selectivity of Cu-based catalysts in CO_(2)hydrogenation to methanol,Al_(2)O_(3),ZrO_(2)and CeO_(2)modified Cu-ZnO catalysts by the co-precipitation method were prepared,and the influence mechanism of additives on the structure-performance relationship of the catalysts was systematically explored.Through a variety of characterization methods such as XRD,N2 physical adsorption-desorption,TEM,H_(2)-TPR,CO_(2)-TPD and XPS,combined with catalytic performance evaluation experiments,the correlation between the microstructure of catalysts and the reaction performance of CO_(2)hydrogenation to methanol was analyzed in depth.The results show that metal additives significantly improve the performance of catalysts.After the introduction of additives,the specific surface area and pore volume of the catalysts increase,the grain size of Cu decreases,and its dispersion improves.The Ce-modified CZC catalyst exhibited the best performance,with the grain size of CuO as small as 11.41 nm,and the surface oxygen vacancy concentration(OⅡ/OⅠ=3.15)was significantly higher than that of other samples.The reaction performance test shows that under the conditions of 2.8 MPa,8000 h−1 and 280℃,the CO_(2)conversion of the CZC catalyst reached 18.83%,the methanol selectivity was 68.40%,and the methanol yield was 12.88%,all of which are superior to other catalysts.Its excellent performance can be attributed to the fact that CeO_(2)enhances the metal-support interaction,increases the surface basicity,promotes the adsorption and activation of CO_(2),and simultaneously inhibits the reverse water-gas shift side reaction.This study clarifies the structure-activity regulation mechanism of additive modification on Cu-ZnO catalysts,providing a theoretical basis and technical reference for the development of efficient catalysts for CO_(2)hydrogenation to methanol.
基金Supported by Innovation Capability Support Program of Shaanxi(2024RS-CXTD-53,2024ZC-KJXX-096)the Key R&D Program of Shaanxi Province(2022QCY-LL-69)Xi’an Science and Technology Project(24GXFW0089)。
文摘Under the backdrop of“Carbon Peak and Carbon Neutrality”(dual carbon)goal in China,the methane-carbon dioxide reforming reaction has attracted considerable attention due to its environmental benefits of converting two greenhouse gases(methane and carbon dioxide)into syngas and its promising industrial applications.Nickel(Ni)-based catalysts,with high catalytic activity,low cost,and abundant resources,are considered ideal candidates for industrial applications.In this article,three reaction kinetic models were briefly introduced,namely the Power-Law(PL)model,the Eley-Rideal(ER)model,and the Langmuir-Hinshelwood-Hougen-Watson(LHHW)model.Based on the LHHW model,the reaction kinetics and mechanisms of different catalytic systems were systematically discussed,including the properties of supports,the doping of noble metals and transition metals,the role of promoters,and the influence of the geometric and electronic structures of Ni on the reaction mechanism.Furthermore,the kinetics of carbon deposition and elimination on various catalysts were analyzed.Based on the reaction rate expressions for carbon elimination,the reasons for the high activity of transition metal iron(Fe)-doped catalysts and core-shell structured catalysts in carbon elimination were explained.Based on the detailed collation and comparative analysis of the reaction mechanisms and kinetic characteristics across diverse Ni-based catalytic systems,a theoretical guidance for the designing of high-performance catalysts was provided in this work.
基金Supported by the National Natural Science Foundation of China(No.52273056)the Science and Technology Development Program of Jilin Province,China(No.YDZJ202501ZYTS305)。
文摘Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.
基金Supported by the Science and Technology Cooperation and Exchange special project of Cooperation of Shanxi Province(202404041101014)the Fundamental Research Program of Shanxi Province(202403021212333)+3 种基金the Joint Funds of the National Natural Science Foundation of China(U24A20555)the Lvliang Key R&D of University-Local Cooperation(2023XDHZ10)the Initiation Fund for Doctoral Research of Taiyuan University of Science and Technology(20242026)the Outstanding Doctor Funding Award of Shanxi Province(20242080).
文摘To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.
基金Supported by the National Key Research and Development Program of China(2023YFB4104500,2023YFB4104502)the National Natural Science Foundation of China(22138013)the Taishan Scholar Project(ts201712020).
文摘Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.
基金financial support from the National Natural Science Foundation of China(Nos.22401274,U23B6011)the Jilin Provincial Science and Technology Department Program(No.20250102070JC)。
文摘Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catalysts,but which substantially involve multi-step,tedious,and difficult synthesis.Herein,this study reports an intriguing approach to construct multi-nuclear catalysts for the milestoneα-diimine nickel catalysts using an oligomeric strategy.A polymerizable norbornene unit is incorporated into theα-diimine ligand backbone,leading to the formation of the monomeric nickel catalyst Ni_(1)and its corresponding oligomeric nickel catalysts(Ni_(3)and Ni_(5))with varying degrees of polymerization(DP=3 and 5).Notably,the oligomeric catalyst Ni_(5)was facilely scaled up(50 g-level),showed enhanced thermal stability,exhibited 4.6 times higher activity,and yielded polyethylene elastomer with a 379%increased molecular weight in ethylene polymerization,compared to the monomeric catalyst Ni_(1).Catalytic performance enhancements of oligomeric catalysts were found to be DP-dependent.The kilogram-scale polyethylene,produced using Ni_(5)in a 20 L reactor,presented a highly branched all-hydrocarbon structure,which demonstrated typical elastic properties(tensile strength:4 MPa,elastic recovery:SR=72%)along with great processability(MFI=3.0 g/10 min),insulating characteristics(volume resistivity=2×10^(16)Ω/m),and hydrophobicity(water vapor permeability:0.03 g/m^(2)/day),suggesting potentially practical applications.
基金funded by the Innovative Research Group Project of the National Natural Science Foundation of China(52121004)the Research Development Fund(No.RDF-21-02-060)by Xi’an Jiaotong-Liverpool University+1 种基金support received from the Suzhou Industrial Park High Quality Innovation Platform of Functional Molecular Materials and Devices(YZCXPT2023105)the XJTLU Advanced Materials Research Center(AMRC).
文摘Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.
基金supported by the National Natural Science Foundation of China(No.52064035)the Key Research and Development Program of Gansu Province,China(No.25YFGA024)the Natural Science Foundation of Zhejiang Province,China(No.LGG22E020003).
文摘Lithium-sulfur(Li-S)batteries boast a theoretical energy density as high as 2600 Wh·kg^(−1),positioning them as a highly attractive option for future advanced energy storage systems.Challenges such as slow transformation kinetics and shuttle effects associated with lithium polysulfides(LiPSs)have seriously hindered their practical applications.In this paper,we present a new method for the synthesis of hollow carbon-sphere-supported Co monatomic catalysts(Co-N-C).This new synthesis method achieves pyrolytic coordination using a precursor rich in imide(-RC=N-)polymers.This synthesis method not only improves the adsorbability and catalytic activity of LiPS but also significantly weakens the shuttle effect and generates Co-N-C with superior conductivity,abundant hollow structures,and a high specific surface area,thus efficiently capturing and restricting the movement of LiPS intermediates.The dispersed Co monoatomic catalysts(Co SACs)were anchored to a highly conductive nitrogen-doped carbon framework and exhibited symmetric N-coordination active sites(Co-N_(4))to ensure fast redox kinetics of LiPS and Li_(2)S_(2)/Li_(2)S solid-state products.The lithium-sulfur battery with Co-N-C as the sulfur carrier showed excellent discharging capacity of 1146.6 mAh·g^(−1) at a discharge rate of 0.5 C and maintained excellent performance at a high discharge rate of 2 C.The capacity decay rate in 500 cycles was only 0.086%per cycle,reflecting excellent long-term cycle stability.This study highlights the key role of the synergistic effect between single-atom cobalt catalysts and hollow carbon spheres in enhancing the efficiency of lithium-sulfur(Li-S)batteries.It also provides valuable insights into the construction and fabrication of highly active monatomic catalysts.The catalytic conversion efficiency of lithium polysulfides is significantly enhanced when embedded in hollow carbon architectures,which serves as a critical strategy for optimizing the electrochemical behavior of next-generation Li-S batteries.
基金supported by the Australian Research Council(ARC)Projects(DP220101139,DP220101142,and LP240100542).
文摘High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environments,tunable electronic structures,abundant unsaturated active sites,and dynamic structural reassembly—collectively enhance electrochemical activity and durability under operating conditions.This review summarizes recent advances in HEACs for hydrogen evolution,oxygen evolution,and overall water splitting,highlighting their disorder-driven advantages over crystalline counterparts.Catalytic performance benchmarks are presented,and mechanistic insights are discussed,focusing on how multimetallic synergy,amorphization effect,and in‐situ reconstruction cooperatively regulate reaction pathways.These insights provide guidance for the rational design of next‐generation amorphous high‐entropy electrocatalysts with improved efficiency and durability.
基金supports from the National Natural Science Foundation of China(Grant Nos.12305372 and 22376217)the National Key Research&Development Program of China(Grant Nos.2022YFA1603802 and 2022YFB3504100)+1 种基金the projects of the key laboratory of advanced energy materials chemistry,ministry of education(Nankai University)key laboratory of Jiangxi Province for persistent pollutants prevention control and resource reuse(2023SSY02061)are gratefully acknowledged.
文摘Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespread attention for CO_(2)RR due to their high catalytic activity,selectivity,excellent stability,and low cost.However,they still need to be further improved to meet the needs of industrial applications.This review article comprehensively summarizes the recent advances in regulation strategies of Bi-based catalysts and can be divided into six categories:(1)defect engineering,(2)atomic doping engineering,(3)organic framework engineering,(4)inorganic heterojunction engineering,(5)crystal face engineering,and(6)alloying and polarization engineering.Meanwhile,the corresponding catalytic mechanisms of each regulation strategy will also be discussed in detail,aiming to enable researchers to understand the structure-property relationship of the improved Bibased catalysts fundamentally.Finally,the challenges and future opportunities of the Bi-based catalysts in the photoelectrocatalytic CO_(2)RR application field will also be featured from the perspectives of the(1)combination or synergy of multiple regulatory strategies,(2)revealing formation mechanism and realizing controllable synthesis,and(3)in situ multiscale investigation of activation pathways and uncovering the catalytic mechanisms.On the one hand,through the comparative analysis and mechanism explanation of the six major regulatory strategies,a multidimensional knowledge framework of the structure-activity relationship of Bi-based catalysts can be constructed for researchers,which not only deepens the atomic-level understanding of catalytic active sites,charge transport paths,and the adsorption behavior of intermediate products,but also provides theoretical guiding principles for the controllable design of new catalysts;on the other hand,the promising collaborative regulation strategies,controllable synthetic paths,and the in situ multiscale characterization techniques presented in this work provides a paradigm reference for shortening the research and development cycle of high-performance catalysts,conducive to facilitating the transition of photoelectrocatalytic CO_(2)RR technology from the laboratory routes to industrial application.
文摘To reduce the viscosity of highly-viscous oil of the Tahe oilfield （Xinjiang,China）,an oilsoluble polybasic copolymer viscosity reducer for heavy oil was synthesized using the orthogonal method.The optimum reaction conditions are obtained as follows：under the protection of nitrogen,a reaction time of 9 h,monomer mole ratio of reaction materials of 3：2：2 （The monomers are 2-propenoic acid,docosyl ester,maleic anhydride and styrene,respectively）,initiator amount of 0.8% （mass percent of the sum of all the monomers） and reaction temperature of 80 oC.This synthesized viscosity reducer is more effective than commercial viscosity reducers.The rate of viscosity reduction reached 95.5% at 50 oC.Infrared spectra （IR） and interfacial tensions of heavy oil with and without viscosity reducer were investigated to understand the viscosity reduction mechanism.When viscosity reducer is added,the molecules of the viscosity reducer are inserted amongst the molecules of crude oil,altering the original intermolecular structure of crude oil and weakening its ability to form hydrogen bonds with hydroxyl or carboxyl groups,so the viscosity of crude oil is reduced.Field tests of the newly developed oil-soluble viscosity reducer was carried out in the Tahe Oilfield,and the results showed that 44.5% less light oil was needed to dilute the heavy oil to achieve the needed viscosity.
基金Project(50235030)supported by the National Natural Science Foundation of China project(G1999065009)supported by the National Basic Research Program of China
文摘A four-ball machine was employed to investigate the tribological performances and the synergetic function of organo-molybdenum compounds (molybdenum dialkyl-dithiophosphate and molybdenum dithiophosphate, coded as MoDDP and MoDTP, respectively) as additives in liquid paraffin. The morphologies of the worn surfaces and elemental distributions were observed and determined by means of scanning electron microscopy and energy dispersive spectrometry. The chemical states of some typical elements on the worn surface were analyzed on X-ray photoelectron spectroscope. The results show that MoDDP and MoDTP additives in liquid paraffin have excellent antiwear and friction-reduction properties, which are attributed to the reaction film composed of MoS2, FeS and MoO2, and the deposited film composed of phosphate on the worn surface. Moreover, these two additives have synergetic friction-reducing and antiwear effect, which is closely related to the chemical states of S on the worn surface.
基金the financial support of the National Natural Science Foundation of China(Nos.21422603 and U1662120)
文摘The solubility of initiator determines its distribution and the roles played in emulsion polymerization as well as the final products, but this is still lack of systematic investigation. The present work focuses on this issue by comparing the kinetic behaviors and product properties of styrene emulsion polymerization initiated by 2,2-azoisobutyronitrile(AIBN) and potassium persulphate(KPS).Compared to KPS-initiated emulsion polymerization, the AIBN-initiated polymerization was found to be insensitive to the type of emulsifier, and have high polymerization rate as well as narrow molecular weight distribution and particle size distribution. This result indicates the effective free radicals are generated in micelles or colloids, which could decrease the proportion of homogeneous nucleation and make the process and product more controllable. As a consequence, there is a linear relationship between molecular weight of product and AIBN concentration in lg-lg coordinate. It provided a reference for the preparation of latexes with specified molecular weight and supported the possibility of the coexistence of multiple free radicals in one micelle or colloid when using oil-soluble initiator.
文摘Fast phase-transferring was adopted in ethanol solution at the condition of n (oil-soluble tea pol-yphenol): N (As3﹢) = 2:1, 4:1, 6:1, pH = 4.0, temperature 40°C - 45°C, action period of 15 h to compose the target, of which the productivity was 59%, UV was 267.50, 218.00, 220.50 nm, FTIR was 6291, 34158.6, 2850.2, 1708.2;1457.3;1370.4, 1224.2, 1144.0, 760.5 cm﹣1, fluorescence value λmax = 257, 591.1, 593.7, 590.3, 591.0, 591.5, XRD λ/nm is 3.6974, 4.186, 12.0762, 15.4747, 1H-NMRδ = 0.782, 1.193, 1.483 - 1.586, 1.959 - 2.184, 2.479, 3.116, 3.970 - 3.981, 5.231 - 5.753, 6.537 - 7.300. Finally it was ascertained through XRD as double-coordinated polycrystal compound.
基金financially supported by the National Natural Science Foundation of China(Nos.51602018 and 51902018)the Natural Science Foundation of Beijing Municipality(No.2154052)+3 种基金the China Postdoctoral Science Foundation(No.2014M560044)the Fundamental Research Funds for the Central Universities(No.FRF-MP-20-22)USTB Research Center for International People-to-people Exchange in Science,Technology and Civilization(No.2022KFYB007)Education and Teaching Reform Foundation at University of Science and Technology Beijing(Nos.2023JGC027,KC2022QYW06,and KC2022TS09)。
文摘S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.
基金support from the Czech Science Foundation,project EXPRO,No 19-27454Xsupport by the European Union under the REFRESH—Research Excellence For Region Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition from the Ministry of the Environment of the Czech Republic+1 种基金Horizon Europe project EIC Pathfinder Open 2023,“GlaS-A-Fuels”(No.101130717)supported from ERDF/ESF,project TECHSCALE No.CZ.02.01.01/00/22_008/0004587).
文摘Green hydrogen from water splitting has emerged as a critical energy vector with the potential to spearhead the global transition to a fossil fuel-independent society.The field of catalysis has been revolutionized by single-atom catalysts(SACs),which exhibit unique and intricate interactions between atomically dispersed metal atoms and their supports.Recently,bimetallic SACs(bimSACs)have garnered significant attention for leveraging the synergistic functions of two metal ions coordinated on appropriately designed supports.BimSACs offer an avenue for rich metal–metal and metal–support cooperativity,potentially addressing current limitations of SACs in effectively furnishing transformations which involve synchronous proton–electron exchanges,substrate activation with reversible redox cycles,simultaneous multi-electron transfer,regulation of spin states,tuning of electronic properties,and cyclic transition states with low activation energies.This review aims to encapsulate the growing advancements in bimSACs,with an emphasis on their pivotal role in hydrogen generation via water splitting.We subsequently delve into advanced experimental methodologies for the elaborate characterization of SACs,elucidate their electronic properties,and discuss their local coordination environment.Overall,we present comprehensive discussion on the deployment of bimSACs in both hydrogen evolution reaction and oxygen evolution reaction,the two half-reactions of the water electrolysis process.
文摘In this study, the azo red dyes derived from p-n-alkyl aniline by the introduction of different alkyl groups having high solubility in dodecane were synthesized. Results indicated that the elementary properties of red oil inks were 1) non-polarity;2) low viscosity (<3.0 cps);3) specified surface tension (<30 mN/m);4) intensity of visible absorption covering 480 - 540 nm;5) hue close to standard red (CIE(x, y) = 0.67, 0.33). We can conclude that these azo red dyes are applicable for electrowetting displays.
基金the Canadian NRCan OERD Energy Innovation Programthe Natural Sciences and Engineering Research Council of Canada,and the Carbon Solution Program for their financial support.
文摘The pursuit of alternative fuel generation technologies has gained momentum due to the diminishing reserves of fossil fuels and global warming from increased CO_(2)emission.Among the proposed methods,the hydrogenation of CO_(2)to produce marketable carbon-based products like methanol and ethanol is a practical approach that offers great potential to reduce CO_(2)emissions.Although significant volumes of methanol are currently produced from CO_(2),developing highly efficient and stable catalysts is crucial for further enhancing conversion and selectivity,thereby reducing process costs.An in-depth examination of the differences and similarities in the reaction pathways for methanol and ethanol production highlights the key factors that drive C-C coupling.Identifying these factors guides us toward developing more effective catalysts for ethanol synthesis.In this paper,we explore how different catalysts,through the production of various intermediates,can initiate the synthesis of methanol or ethanol.The catalytic mechanisms proposed by spectroscopic techniques and theoretical calculations,including operando X-ray methods,FTIR analysis,and DFT calculations,are summarized and presented.The following discussion explores the structural properties and composition of catalysts that influence C-C coupling and optimize the conversion rate of CO_(2)into ethanol.Lastly,the review examines recent catalysts employed for selective methanol and ethanol production,focusing on single-atom catalysts.
基金supported by the Natural Science Foundation of Shanxi Province(202203021221155)the Foundation of National Key Laboratory of High Efficiency and Low Carbon Utilization of Coal(J23-24-902)。
文摘With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.
