This paper carries out the analysis of mechanics of a grip system of three-key-board hydraulic tongs developed for offshore oil pipe lines which has been successfully used in oil fields in China. The main improvement ...This paper carries out the analysis of mechanics of a grip system of three-key-board hydraulic tongs developed for offshore oil pipe lines which has been successfully used in oil fields in China. The main improvement of this system is that a lever frame structure is used in the structural design, which reduces greatly the stresses of the major components of the oil pipe tongs. Theoretical analysis and numerical calculation based on thirteen basic equations developed Show that the teeth board of the tongs is not easy to slip as frequently happens to other systems and is of higher reliability.展开更多
The flow stress behavior of grade G-105 steel （API standard） for oil drill pipe in hot compressive deformation was studied by isothermal compression tests on Gleeble- 1500 thermal-mechanical machine. Referring to es...The flow stress behavior of grade G-105 steel （API standard） for oil drill pipe in hot compressive deformation was studied by isothermal compression tests on Gleeble- 1500 thermal-mechanical machine. Referring to established empirical formulas, the constitutive equation of the flow stress for G-105 steel was obtained. For the grade G- 105 oil drill pipe （φ114.3× 10.92 mm）, through proper design of the die and applying suitable process parameters, and using coupled rigid viscoplastic thermo-mechanical finite element method, the forming process of making upset on oil drill pipe was numerically simulated. The simulation results show that the internal transition section of the oil drill pipe is not only continuous and smooth but also long （up to about 220-250 mm）.展开更多
This study presents the methodology to eliminate oil residual in copper pipe due to rolling process for manufacturing coil used in air conditioner. The pressure caused by Nitrogen flow rate was applied starting from 0...This study presents the methodology to eliminate oil residual in copper pipe due to rolling process for manufacturing coil used in air conditioner. The pressure caused by Nitrogen flow rate was applied starting from 0, 5, 10, and 15 bar, respectively which was depending on time delay and pipe length. The developed system was divided into 2 modules: Parallel pressure ladder module (PPLM) [1] and Serial pressure ladder module (SPLM) which were experimented with 2 sizes of copper pipe: diameter 7.29 mm, thickness 0.25 mm, and length 10 km, and diameter 8 mm, thickness 0.25 mm, and length 10 km. From experiment, it can be noted that PPLM would perform better in elimination of oil residual compared to SPLM. About 97.44% (0.04 mg/m) and 97.59% (0.05 mg/m) of oil residual can be respectively eliminated from diameter 7.29 mm pipe and diameter 8 mm pipe which exceeded the standard allowance of 30% or 0.1 mg/m. Moreover, the cost of Nitrogen can be reduced by 6.25% per month.展开更多
The oil steel pipe in the petroleum industry is very important for its high price, large consumption volume and great effect on the development of petroleum industry. The oil steel pipe mainly includes oil well pipe (...The oil steel pipe in the petroleum industry is very important for its high price, large consumption volume and great effect on the development of petroleum industry. The oil steel pipe mainly includes oil well pipe (drill pipe, drill collar, casing and tubing etc.) and oil-gas transportation pipe. This paper is an attempt to make a comprehensive review on the current situation and prospect of the oil steel pipe in China, presenting the past , today and future of the China oil pipe. The first section is a historical review of the China oil pipe. The developing course and progress of the oil steel pipe products are presented. The second section is about the current situation of the China oil pipe. The general situation of the China’s steel pipe corporation and their products types, capability, etc. is introduced. The third section is about the prospect of the China oil pipe. This part mainly describes the new product research and development in China steel pipe corporations, which are facing more and more strict technical requirements of the petroleum industry in oil pipe, and reveals the prosperity of China’s steel pipe corporations.展开更多
Since the development of offshore oil and gas, increased submarine oil and gas pipelines were installed. All the early steel pipes of submarine pipelines depended on importing because of the strict requirements of com...Since the development of offshore oil and gas, increased submarine oil and gas pipelines were installed. All the early steel pipes of submarine pipelines depended on importing because of the strict requirements of comprehensive properties, such as, anti-corrosion, resistance to pressure and so on. To research and develop domes- tic steel pipes used for the submarine pipeline, the Longitudinal-seam Submerged Arc Welded （LSAW） pipes were made of steel plates cut from leveled hot rolled coils by both the JCOE and UOE （the forming process in which the plate like the letter “J”, “C”, “0” or “U” shape, then expansion） forming processes. Furthermore, the mechanical properties of the pipe base metal and weld metal were tested, and the results were in accordance with the corresponding pipe specification API SPEC 5L or DNV- OS-FI01, which showed that domestic LSAW pipes could be used for submarine oil and gas pipelines.展开更多
The interfacial electrification properties play an important role in the electrochemical corrosion reaction which leads the electrostatic charge to generate and accumulate on the metal surface when the insulating oil ...The interfacial electrification properties play an important role in the electrochemical corrosion reaction which leads the electrostatic charge to generate and accumulate on the metal surface when the insulating oil flows through a metal pipe. In this paper, the interfacial electrification properties resulted by the oil flow rate and the action of electric charge trapper are investigated by measuring the current and potential on the surface of the test metal pipe. The measured results showed that the current and potential between the metal pipe and the earth increased with the rise of flow rate; and as the flow rate increased, the growth trends of the current and potential difference between two close flow rates increased and decreased, respectively, while there was an electric charge trapper set in the radial direction of the pipe, the measured current and potential decreased compared with that of without electric charge trapper, which was because it captured and caught part of charge in the oil flow bulk to neutralize the opposite charge on the surface of the metal pipe.展开更多
文摘This paper carries out the analysis of mechanics of a grip system of three-key-board hydraulic tongs developed for offshore oil pipe lines which has been successfully used in oil fields in China. The main improvement of this system is that a lever frame structure is used in the structural design, which reduces greatly the stresses of the major components of the oil pipe tongs. Theoretical analysis and numerical calculation based on thirteen basic equations developed Show that the teeth board of the tongs is not easy to slip as frequently happens to other systems and is of higher reliability.
文摘The flow stress behavior of grade G-105 steel （API standard） for oil drill pipe in hot compressive deformation was studied by isothermal compression tests on Gleeble- 1500 thermal-mechanical machine. Referring to established empirical formulas, the constitutive equation of the flow stress for G-105 steel was obtained. For the grade G- 105 oil drill pipe （φ114.3× 10.92 mm）, through proper design of the die and applying suitable process parameters, and using coupled rigid viscoplastic thermo-mechanical finite element method, the forming process of making upset on oil drill pipe was numerically simulated. The simulation results show that the internal transition section of the oil drill pipe is not only continuous and smooth but also long （up to about 220-250 mm）.
文摘This study presents the methodology to eliminate oil residual in copper pipe due to rolling process for manufacturing coil used in air conditioner. The pressure caused by Nitrogen flow rate was applied starting from 0, 5, 10, and 15 bar, respectively which was depending on time delay and pipe length. The developed system was divided into 2 modules: Parallel pressure ladder module (PPLM) [1] and Serial pressure ladder module (SPLM) which were experimented with 2 sizes of copper pipe: diameter 7.29 mm, thickness 0.25 mm, and length 10 km, and diameter 8 mm, thickness 0.25 mm, and length 10 km. From experiment, it can be noted that PPLM would perform better in elimination of oil residual compared to SPLM. About 97.44% (0.04 mg/m) and 97.59% (0.05 mg/m) of oil residual can be respectively eliminated from diameter 7.29 mm pipe and diameter 8 mm pipe which exceeded the standard allowance of 30% or 0.1 mg/m. Moreover, the cost of Nitrogen can be reduced by 6.25% per month.
文摘The oil steel pipe in the petroleum industry is very important for its high price, large consumption volume and great effect on the development of petroleum industry. The oil steel pipe mainly includes oil well pipe (drill pipe, drill collar, casing and tubing etc.) and oil-gas transportation pipe. This paper is an attempt to make a comprehensive review on the current situation and prospect of the oil steel pipe in China, presenting the past , today and future of the China oil pipe. The first section is a historical review of the China oil pipe. The developing course and progress of the oil steel pipe products are presented. The second section is about the current situation of the China oil pipe. The general situation of the China’s steel pipe corporation and their products types, capability, etc. is introduced. The third section is about the prospect of the China oil pipe. This part mainly describes the new product research and development in China steel pipe corporations, which are facing more and more strict technical requirements of the petroleum industry in oil pipe, and reveals the prosperity of China’s steel pipe corporations.
文摘Since the development of offshore oil and gas, increased submarine oil and gas pipelines were installed. All the early steel pipes of submarine pipelines depended on importing because of the strict requirements of comprehensive properties, such as, anti-corrosion, resistance to pressure and so on. To research and develop domes- tic steel pipes used for the submarine pipeline, the Longitudinal-seam Submerged Arc Welded （LSAW） pipes were made of steel plates cut from leveled hot rolled coils by both the JCOE and UOE （the forming process in which the plate like the letter “J”, “C”, “0” or “U” shape, then expansion） forming processes. Furthermore, the mechanical properties of the pipe base metal and weld metal were tested, and the results were in accordance with the corresponding pipe specification API SPEC 5L or DNV- OS-FI01, which showed that domestic LSAW pipes could be used for submarine oil and gas pipelines.
文摘The interfacial electrification properties play an important role in the electrochemical corrosion reaction which leads the electrostatic charge to generate and accumulate on the metal surface when the insulating oil flows through a metal pipe. In this paper, the interfacial electrification properties resulted by the oil flow rate and the action of electric charge trapper are investigated by measuring the current and potential on the surface of the test metal pipe. The measured results showed that the current and potential between the metal pipe and the earth increased with the rise of flow rate; and as the flow rate increased, the growth trends of the current and potential difference between two close flow rates increased and decreased, respectively, while there was an electric charge trapper set in the radial direction of the pipe, the measured current and potential decreased compared with that of without electric charge trapper, which was because it captured and caught part of charge in the oil flow bulk to neutralize the opposite charge on the surface of the metal pipe.
