升降轨PSInSAR时序分析获得的同一地区2组监测结果分别为升轨和降轨下的地表形变速率与累积变形量。针对研究区地面以下沉为主,水平方向变形极为微小的特点,将视线向(line of sight,LOS)变形转换为垂向的下沉值,以此进行升降轨模式下2...升降轨PSInSAR时序分析获得的同一地区2组监测结果分别为升轨和降轨下的地表形变速率与累积变形量。针对研究区地面以下沉为主,水平方向变形极为微小的特点,将视线向(line of sight,LOS)变形转换为垂向的下沉值,以此进行升降轨模式下2组观测值的比较与精度检验。在此基础上,将相干目标的2组观测序列数据融合以实现加密观测。研究结果表明:升降轨模式下沉降速率观测值的互检验精度优于2 mm;2组观测序列数据的融合结果进一步揭示了相干目标在时域上的非线性沉降特征。展开更多
Beam-based BPM offset calibration was carried out for Injector II at the C-ADS demonstration facility at the Institute of Modern Physics （IMP）, Chinese Academy of Science （CAS）. By using the steering coils integra...Beam-based BPM offset calibration was carried out for Injector II at the C-ADS demonstration facility at the Institute of Modern Physics （IMP）, Chinese Academy of Science （CAS）. By using the steering coils integrated in the quadrupoles, the beam orbit can be effectively adjusted and BPM positions recorded at the Medium Energy Beam Transport of the Injector II Linac. The studies were done with a 2 mA, 2.1 MeV proton beam in pulsed mode. During the studies, the ＂null comparison method＂ was applied for the calibration. This method is less sensitive to errors compared with the traditional transmission matrix method. In addition, the quadrupole magnet＇s center can also be calibrated with this method.展开更多
文摘升降轨PSInSAR时序分析获得的同一地区2组监测结果分别为升轨和降轨下的地表形变速率与累积变形量。针对研究区地面以下沉为主,水平方向变形极为微小的特点,将视线向(line of sight,LOS)变形转换为垂向的下沉值,以此进行升降轨模式下2组观测值的比较与精度检验。在此基础上,将相干目标的2组观测序列数据融合以实现加密观测。研究结果表明:升降轨模式下沉降速率观测值的互检验精度优于2 mm;2组观测序列数据的融合结果进一步揭示了相干目标在时域上的非线性沉降特征。
基金Supported by National Natural Science Foundation of China(91426303,11525523)
文摘Beam-based BPM offset calibration was carried out for Injector II at the C-ADS demonstration facility at the Institute of Modern Physics （IMP）, Chinese Academy of Science （CAS）. By using the steering coils integrated in the quadrupoles, the beam orbit can be effectively adjusted and BPM positions recorded at the Medium Energy Beam Transport of the Injector II Linac. The studies were done with a 2 mA, 2.1 MeV proton beam in pulsed mode. During the studies, the ＂null comparison method＂ was applied for the calibration. This method is less sensitive to errors compared with the traditional transmission matrix method. In addition, the quadrupole magnet＇s center can also be calibrated with this method.
