期刊文献+
共找到8,822篇文章
< 1 2 250 >
每页显示 20 50 100
Research on conduction band offset of CZTSSe solar cell with double absorber layers 被引量:1
1
作者 HU Xiaofeng XUE Yuming +3 位作者 DAI Hongli WANG Luoxin NI Meng BAI Xin 《Optoelectronics Letters》 2025年第7期391-396,共6页
Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)is considered to be the most potential light-absorbing material to replace CuInGaSe_(2)(CIGS),but the actual photoelectric conversion efficiency of such cells is much lower than that of CIG... Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)is considered to be the most potential light-absorbing material to replace CuInGaSe_(2)(CIGS),but the actual photoelectric conversion efficiency of such cells is much lower than that of CIGS.One of the reasons is the high recombination rate of carriers at the interface.In this paper,in order to reduce the carrier recombination,a new solar cell structure with double absorber layers of Al-doped ZnO(AZO)/intrinsic(i)-ZnO/CdS/CZTS_(x1)Se_(1−x1)(CZTSSe_(1))/CZTS_(x2)Se_(1−x2)(CZTSSe_(2))/Mo was proposed,and the optimal conduction band offsets(CBOs)of CdS/CZTSSe_(1) interface and CZTSSe_(1)/CZTSSe_(2) interface were determined by changing the S ratio in CZTSSe_(1) and CZTSSe_(2),and the effect of thickness of CZTSSe_(1) on the performance of the cell was studied.The efficiencies of the optimized single and double absorber layers reached 17.97%and 23.4%,respectively.Compared with the single absorber layer structure,the proposed structure with double absorber layers has better cell performance. 展开更多
关键词 EFFICIENCY carrier recombination double absorber layers conduction band offset solar cell CZTSSe solar cell
原文传递
Comparison of asymmetric offset versus pupil centered ablation in refractive surgery
2
作者 Hassan Hashemi Mojgan Pakbin +2 位作者 Alireza Hashemi Mohammadreza Aghamirsalim Mehdi Khabazkhoob 《International Journal of Ophthalmology(English edition)》 2025年第8期1537-1543,共7页
AIM:To compare the visual and optical outcomes following femtosecond laser in situ keratomileusis(FS-LASIK)using an aberration neutral profile with asymmetric offset(AO)and pupil center(PC)treatments.METHODS:In this r... AIM:To compare the visual and optical outcomes following femtosecond laser in situ keratomileusis(FS-LASIK)using an aberration neutral profile with asymmetric offset(AO)and pupil center(PC)treatments.METHODS:In this randomized double-blind clinical trial study,48(24 cases)and 38 eyes(19 cases)underwent myopic astigmatism and hyperopic astigmatism LASIK.One eye of each individual was randomly assigned to AO centration and the fellow eye underwent the PC-centered method.The clinical outcomes including uncorrected visual acuity(UCVA),best-corrected visual acuity(BCVA),safety and efficacy indexes,subjective spherical equivalent(SE)and corneal high-order aberrations(HOAs)were measured at baseline and 6mo postoperatively.RESULTS:In the myopic group,the mean preoperative SE and astigmatism were-4.12±0.87(-2.88 to-6.00)diopter(D)and-0.88±0.79(0 to-2.75)D,respectively.In the hyperopic group,the mean preoperative SE and astigmatism were 0.93±0.59(-0.25 to 2.25)D and-0.73±1.00(0 to-4.25)D,respectively.At 6mo postoperatively,the safety and efficacy indexes were similar for centration in myopic and hyperopic LASIK groups.In the myopic group,significant changes were found in horizontal trefoil(P=0.041)and oblique trefoil(P=0.031)in favor of AO centration treatment.CONCLUSION:Femtosecond-LASIK is a safe and efficacious procedure for treatment of myopic and hyperopic astigmatism.AO-centered and PC-centered approaches provide similar visual and refractive outcomes.Myopic astigmatism LASIK with AO centration leads to slightly better corneal aberration outcomes. 展开更多
关键词 femtosecond laser in situ keratomileusis asymmetric offset pupil center
原文传递
快速成型系统中OFFSET型填充算法 被引量:24
3
作者 刘斌 张征 +1 位作者 孙延明 张世俊 《华南理工大学学报(自然科学版)》 EI CAS CSCD 北大核心 2001年第3期64-66,共3页
在SW 2 50 1快速成型系统中 ,零件的制作是靠热喷头喷出热熔丝逐层堆积成型的 ,在逐层堆积过程中 ,热喷头要做大量的填充扫描 ,填充方法直接影响零件的成型质量 .文中介绍了一种基于截面轮廓的OFFSET型填充路径的生成算法 ,该算法快速可... 在SW 2 50 1快速成型系统中 ,零件的制作是靠热喷头喷出热熔丝逐层堆积成型的 ,在逐层堆积过程中 ,热喷头要做大量的填充扫描 ,填充方法直接影响零件的成型质量 .文中介绍了一种基于截面轮廓的OFFSET型填充路径的生成算法 ,该算法快速可靠 ,能得到比较光滑、平整的成型截面 . 展开更多
关键词 快速成型 offset型填充算法 填充路径 填充速度 截面轮廓 填充扫描
在线阅读 下载PDF
基于Capon的CSB sin-FDA稳健波束形成 被引量:6
4
作者 王博 谢军伟 +1 位作者 张晶 赵敏 《北京理工大学学报》 EI CAS CSCD 北大核心 2020年第1期53-61,共9页
针对抑制与目标位置接近的干扰过程中,MVDR波束形成器在阵元数较大、导向矢量失配情况下出现的主瓣畸变问题展开分析.在CSB sin-FDA接收阵列结构代替ULA-FDA接收阵列的基础上,通过RCB算法对存在误差的估计导向矢量进行修正,计算修正后... 针对抑制与目标位置接近的干扰过程中,MVDR波束形成器在阵元数较大、导向矢量失配情况下出现的主瓣畸变问题展开分析.在CSB sin-FDA接收阵列结构代替ULA-FDA接收阵列的基础上,通过RCB算法对存在误差的估计导向矢量进行修正,计算修正后的最优权矢量.仿真验证了本文方法与基于PA的MVDR波束形成器,基于FDA-BFF的MVDR波束形成器相比,在导向矢量失配时的性能优势. 展开更多
关键词 MVDR波束形成器 csb sin-FDA 导向矢量 RCB算法
在线阅读 下载PDF
稻瘟菌糖蛋白激发子CSBⅠ纯化过程的优化 被引量:4
5
作者 纪春艳 李云锋 王振中 《华中农业大学学报》 CAS CSCD 北大核心 2007年第1期37-40,共4页
利用蛋白纯化系统AKTA Purifier 100对来源于稻瘟菌(Magnaporthe grisea)ZC13菌株97-151a菌丝细胞壁的糖蛋白激发子CSBⅠ进行纯化过程的优化。离子交换层析条件的选择结果表明:弱阴离子柱DE-AE-Sepharose FF和Tris-HCl缓冲体系的洗脱效... 利用蛋白纯化系统AKTA Purifier 100对来源于稻瘟菌(Magnaporthe grisea)ZC13菌株97-151a菌丝细胞壁的糖蛋白激发子CSBⅠ进行纯化过程的优化。离子交换层析条件的选择结果表明:弱阴离子柱DE-AE-Sepharose FF和Tris-HCl缓冲体系的洗脱效果较好。新的步骤是:选用YM30膜超滤,省略ConA-Sepha-rose 4B亲和层析,粗激发子过凝胶柱Sephacryl S-100,阴离子柱DEAE-Sepharose FF,获得的活性峰D3,即为纯化的CSBⅠ。随着激发子的逐步纯化,其诱导不同水稻品系叶片中的POD比活相应显著升高(P<0.01),CSBⅠ的诱导活性最高。该纯化方法简便,重现性稳定,提高了纯化效率。 展开更多
关键词 稻瘟菌 激发子csb 纯化
在线阅读 下载PDF
基于控制顶点扰动的平面Offset曲线的NURBS逼近 被引量:4
6
作者 汪国平 陈玉健 孙家广 《计算机学报》 EI CSCD 北大核心 1999年第12期1259-1266,共8页
平面曲线的offset曲线具有丰富的几何结构,它在曲面造型、NC加工等领域具有广泛应用,但除直线、圆弧或速端曲线等少数几种曲线外,有理多项式参数曲线的offset曲线不能保证仍是有理多项式曲线形式.因此,实际应用中常... 平面曲线的offset曲线具有丰富的几何结构,它在曲面造型、NC加工等领域具有广泛应用,但除直线、圆弧或速端曲线等少数几种曲线外,有理多项式参数曲线的offset曲线不能保证仍是有理多项式曲线形式.因此,实际应用中常用逼近方法表示offset曲线,以保证造型系统中数据结构和几何算法的统一表示.作者针对平面NURBS曲线的特点,提出两种逼近表示方法,一种是基于曲线分割的控制顶点扰动法,另一种是整体控制顶点偏移法.两种方法都可以任意控制offset曲线的逼近精度.所给出的算法简单直观,便于系统实现.经实例验证,算法稳定可靠.并在自主开发的商品化三维造型系统Gem s5.0 展开更多
关键词 几何造型 逼近 NURBS曲线 NURBS offset曲线
在线阅读 下载PDF
平面NURBS曲线及其Offset的双圆弧逼近 被引量:13
7
作者 汪国平 孙家广 《软件学报》 EI CSCD 北大核心 2000年第10期1368-1374,共7页
除直线、圆弧、速端曲线等少数几种曲线外 ,平面参数曲线的 offset曲线通常不能表示成有理参数形式 ,因此在实际应用中 ,为了方便造型系统中数据结构和几何算法的统一表示 ,offset曲线通常用低次曲线逼近来表示 .通过用双圆弧逼近表示 N... 除直线、圆弧、速端曲线等少数几种曲线外 ,平面参数曲线的 offset曲线通常不能表示成有理参数形式 ,因此在实际应用中 ,为了方便造型系统中数据结构和几何算法的统一表示 ,offset曲线通常用低次曲线逼近来表示 .通过用双圆弧逼近表示 NURBS( non- uniform rational B- spline)曲线及其 offset,并利用双圆弧逼近的特有性质 ,把 offset的双圆弧逼近转化为原曲线的双圆弧逼近 ,简化了问题的求解 .同时考虑了双圆弧逼近算法中分割点的选取、公切点的确定以及误差估计等主要问题 .具体算法在自主开发的 Gems5.0中实现 .经实例表明 ,算法稳定。 展开更多
关键词 NURBS曲线 offset 双圆弧逼近 CAD 工业设计
在线阅读 下载PDF
二维Offset平面波有限差分法叠前时间偏移 被引量:8
8
作者 王华忠 冯波 任浩然 《石油物探》 EI CSCD 北大核心 2009年第1期11-19,共9页
在岩性油气藏勘探中,保振幅或保波形成像是进行储层特征分析和参数估计的基础。由于Kirchhoff积分叠前时间偏移、F-K域波动方程叠前时间偏移不适应弱横向变速介质情形,因此,基于偏移距(Offset)域平面波偏移思想,提出了Offset平面波有限... 在岩性油气藏勘探中,保振幅或保波形成像是进行储层特征分析和参数估计的基础。由于Kirchhoff积分叠前时间偏移、F-K域波动方程叠前时间偏移不适应弱横向变速介质情形,因此,基于偏移距(Offset)域平面波偏移思想,提出了Offset平面波有限差分法叠前时间偏移方法。讨论了CMP道集平面波分解原理,推导了Off- set平面波方程及其有限差分解法,给出了角度道集生成方法。利用大庆油田的一个横向缓变的速度模型,对Offset平面波有限差分法叠前时间偏移方法的有效性进行了验证。结果表明,该方法适应缓横向变速介质情形,波场外推算子保幅,计算效率高,可以为AVP/AVA分析提供较好的基础数据。 展开更多
关键词 offset平面波 有限差分偏移 叠前时间偏移 横向缓变介质
在线阅读 下载PDF
多边形OFFSET中无效环的去除算法 被引量:6
9
作者 赵吉宾 刘伟军 王越超 《工程图学学报》 CSCD 北大核心 2005年第3期44-49,共6页
对于多边形OFFSET后产生的自交环现象,提出一种求解自交点的基于单调链的平面扫描算法,并对环的判别提出了一种简便而有效的方法。最后,对算法的时间复杂度进行了分析。实验表明,该算法高效而稳定地处理多边形OFFSET后产生的自交环。
关键词 计算机应用 多边形offset 无效环 单调链
在线阅读 下载PDF
椭圆型Offset曲线及其应用 被引量:3
10
作者 汪国平 孙家广 《计算机学报》 EI CSCD 北大核心 2000年第5期531-536,共6页
针对 Sweep曲面中形变控制的需要 ,提出了一种椭圆型 offset曲线 ,并讨论了它的性质 .为了便于造型系统的一致性表示 ,给出了椭圆型 offset曲线的 NURBS逼近表示算法 .最后给出了它的应用实例 ,并在自主开发的几何造型系统 GEMS 5 .0中... 针对 Sweep曲面中形变控制的需要 ,提出了一种椭圆型 offset曲线 ,并讨论了它的性质 .为了便于造型系统的一致性表示 ,给出了椭圆型 offset曲线的 NURBS逼近表示算法 .最后给出了它的应用实例 ,并在自主开发的几何造型系统 GEMS 5 .0中实现 . 展开更多
关键词 offset曲线 椭圆型offset曲线 几何造型 CAD
在线阅读 下载PDF
A Ventral Diverterless High Offset S-shaped Inlet at Transonic Speeds 被引量:6
11
作者 谢文忠 郭荣伟 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2008年第3期207-214,共8页
An investigation on the ventral diverterless high offset S-shaped inlet is carried out at Mach numbers from 0.600 to 1.534, angles of attack from -4° to 9.4°, and yaw angles from 0° to 8°. Results ... An investigation on the ventral diverterless high offset S-shaped inlet is carried out at Mach numbers from 0.600 to 1.534, angles of attack from -4° to 9.4°, and yaw angles from 0° to 8°. Results indicate: (1) a large region of low total pressure exists at the lower part of the inlet exit caused by the counter-rotating vortices in the S-shaped duct; (2) the performances of the inlet at Mach number 1.000 reach almost the highest, so the propulsion system could work efficiently in terms of aerodynamics; (3) the total pressure recovery increases slowly at first and then remains unvaried as the Mach number rises from 0.6 to 1.0, however, it does in an opposite manner in the conventional diverter-equipped S-shaped inlet; (4) the performances of the inlet are generally insensitive to angles of attack from -4° to 9.4° and yaw angles from 0° to 8° at Mach number 0.850, and angles of attack from -2° to 6° and yaw angles from 0° to 5° at Mach number 1.534. 展开更多
关键词 aerospace propulsion system diverterless inlet high offset transonic inlet S-shaped inlet experimental investigation
在线阅读 下载PDF
A Novel Offset-Cancellation Technique for Low Voltage CMOS Differential Amplifiers 被引量:3
12
作者 韩书光 池保勇 王志华 《Journal of Semiconductors》 EI CAS CSCD 北大核心 2006年第5期778-782,共5页
Based on a physical understanding of nonlinearity and mismatch, a novel offset-cancellation technique for low voltage CMOS differential amplifiers is proposed. The technique transfers the offset voltage from the outpu... Based on a physical understanding of nonlinearity and mismatch, a novel offset-cancellation technique for low voltage CMOS differential amplifiers is proposed. The technique transfers the offset voltage from the output to other parts of the differential amplifier and can greatly reduce the input-referred offset voltage without extra power consumption. A 1.8V CMOS differential amplifier is implemented in 0.18μm CMOS process using the proposed technique. The simulation results show that the technique could reduce the input-referred offset voltage of the amplifier by 40% with a 20% load transistor mismatch and a 10% input differential transistor mismatch. Moreover, the proposed technique consumes the least power and achieves the highest integration among various offset-cancellation techniques. 展开更多
关键词 CMOS input-referred offset voltage offset voltage calibration low offset voltage
在线阅读 下载PDF
可持久化CSB+-树索引技术研究 被引量:1
13
作者 王胜 秦小麟 +2 位作者 沈尧 李博涵 史文浩 《计算机科学与探索》 CSCD 北大核心 2015年第2期182-192,共11页
现有主存索引方案为实现重用功能仅将更新操作存储到硬盘中,根据操作序列进行索引恢复,实时性和重用性均较差。为进一步提升重用性和实时性,提出了一种可持久化的CSB+-树(cache sensitive B+-tree)索引方案。该方案基于内存映射技术,完... 现有主存索引方案为实现重用功能仅将更新操作存储到硬盘中,根据操作序列进行索引恢复,实时性和重用性均较差。为进一步提升重用性和实时性,提出了一种可持久化的CSB+-树(cache sensitive B+-tree)索引方案。该方案基于内存映射技术,完整而高效地将索引结构保存到外存中,导入时无需重复创建索引,可节省大量计算资源。针对索引更新过程中出现大量内存碎片问题,采用一种分类内存管理机制进行管理和监视,当内存碎片过多而无法利用时,基于有序键值对进行索引重构以完全消除内存碎片。实验结果表明,所提方案与现有方案相比具有更好的实时性和重用性,同时具有高效的查询处理能力。 展开更多
关键词 主存索引 持久化 csb+-树 内存映射 索引头
在线阅读 下载PDF
低快拍下基于RBF的CSB sin-FDA稳健波束形成 被引量:2
14
作者 王博 谢军伟 +1 位作者 张晶 葛佳昂 《振动与冲击》 EI CSCD 北大核心 2020年第6期117-124,共8页
针对抑制与目标位置接近的平台外随队干扰的过程中,MVDR波束形成器在阵元数较大、快拍数不足时的主瓣畸变问题展开分析。以CSB sin-FDA接收阵列结构代替ULA-FDA接收阵列。快拍数不足时,将修正后的协方差矩阵导入模糊RBF神经网络计算最... 针对抑制与目标位置接近的平台外随队干扰的过程中,MVDR波束形成器在阵元数较大、快拍数不足时的主瓣畸变问题展开分析。以CSB sin-FDA接收阵列结构代替ULA-FDA接收阵列。快拍数不足时,将修正后的协方差矩阵导入模糊RBF神经网络计算最优权矢量,避免了矩阵求逆运算。与基于PA及FDA-BFF的MVDR波束形成器相比,在低快拍情况下,该方法在干扰位置处形成有效零陷的同时,主瓣指向能够保持在目标位置。且方向图仅在目标位置处形成单一主瓣峰值,这也为后续关于目标参数估计的一系列分析中的模糊消除奠定了重要基础。数值仿真验证了该方法的有效性。 展开更多
关键词 MVDR波束形成器 csb sin-FDA 协方差矩阵 模糊RBF神经网络
在线阅读 下载PDF
CsB3O5晶体高效三倍频产生28.3W 355nm激光 被引量:3
15
作者 谢仕永 鲁远甫 +4 位作者 张小富 乐小云 杨程亮 王保山 许祖彦 《物理学报》 SCIE EI CAS CSCD 北大核心 2016年第18期266-272,共7页
利用CsB_3O_5(CBO)晶体对Nd:YAG声光调Q准连续1064 nm激光的高效三倍频效应获得高功率355 nm激光输出.1064 nm激光采用大功率脉冲式半导体激光(LD)列阵侧面抽运Nd:YAG晶体的主振荡-功率放大(MOPA)系统实现210 W的调Q准连续输出,激光以1 ... 利用CsB_3O_5(CBO)晶体对Nd:YAG声光调Q准连续1064 nm激光的高效三倍频效应获得高功率355 nm激光输出.1064 nm激光采用大功率脉冲式半导体激光(LD)列阵侧面抽运Nd:YAG晶体的主振荡-功率放大(MOPA)系统实现210 W的调Q准连续输出,激光以1 kHz脉冲串方试运转,每个脉冲串包含5个调Q脉冲,单脉冲宽度为40 ns.经I类LiB_3O_5(LBO)晶体倍频产生98 W 532 nm绿光.通过30 mm长的II类CBO晶体对1064 nm与532 nm光和频获得28.3 W的355 nm紫外光,相应的三倍频转换效率为13.5%,比相同条件下II类LBO晶体高28.6%.研究了CBO三倍频产生355 nm光的温度敏感特性,得到其温度带宽为25?C,远大于LBO晶体的4?C.实验证明,CBO晶体在三倍频产生355 nm的转换效率和温度不敏感性方面均优于LBO晶体. 展开更多
关键词 355 nm激光 csb3O5晶体 三倍频 温度带宽
在线阅读 下载PDF
Topographic effects on long offset transient electromagnetic response 被引量:5
16
作者 唐新功 胡文宝 严良俊 《Applied Geophysics》 SCIE CSCD 2011年第4期277-284,370,共9页
The forward modeling procedure used in this article is formulated with the volume integral equation based on the tensor Green's function. The electromagnetic components responses are first calculated in the frequency... The forward modeling procedure used in this article is formulated with the volume integral equation based on the tensor Green's function. The electromagnetic components responses are first calculated in the frequency domain and then transformed to the time domain by digital filtering. The valley and hill topography with a layered earth is stimulated by a horizontal electric dipole (HED) transmitter, which is common in field surveys, and the TEM responses are calculated at the transmitter and receivers. The topography effects on the long offset electromagnetic transient (LOTEM) responses are discussed in detail. The results show that both valley and hill topography has significant effect on the LOTEM measurement. If the HED is located in the bottom of a valley, the distortion of the observed anomalous field at distance is severe. A valley at the receiver locations show a strong effect but are localized in space and time. In general, hill-shaped topography shows smaller effects no matter where its located. When the topography is located between source and receivers, the influence is negligible. We conclude that the location of the source is much more important than the receivers and it is critical to put the transmitter in an open flat area in the field survey. 展开更多
关键词 THREE-DIMENSION TOPOGRAPHY transient electromagnetic long offset transient electromagnetic (LOTEM)
在线阅读 下载PDF
区间 Bezier 曲线/曲面与 Offset 曲线/曲面之间的关系 被引量:4
17
作者 寿华好 王国瑾 《工程图学学报》 CSCD 1998年第3期55-59,共5页
本文证明了对任意已知的区间Bezier曲线/曲面总存在两条/张Ofset曲线/曲面分别包含与被包含此曲线/曲面,反之亦然。
关键词 区间Bezier 曲线/曲面 offset 计算机图形
在线阅读 下载PDF
稻瘟菌激发子CSBⅠ诱导水稻防御性相关酶的活性变化 被引量:25
18
作者 李云锋 王振中 贾显禄 《作物学报》 CAS CSCD 北大核心 2004年第6期613-617,共5页
选取抗稻瘟病水稻近等基因系C10 1LAC及背景品系CO39为材料 ,与稻瘟病菌 (Magnaporthegrisea)菌株 97 15 1a分别组成高度非亲和性互作关系和亲和性互作关系。接种稻瘟菌细胞壁来源的糖蛋白激发子CSBⅠ后 ,非亲和性互作品种叶片内过氧化... 选取抗稻瘟病水稻近等基因系C10 1LAC及背景品系CO39为材料 ,与稻瘟病菌 (Magnaporthegrisea)菌株 97 15 1a分别组成高度非亲和性互作关系和亲和性互作关系。接种稻瘟菌细胞壁来源的糖蛋白激发子CSBⅠ后 ,非亲和性互作品种叶片内过氧化物酶 (POD)、苯丙氨酸解氨酶 (PAL)和脂氧合酶 (LOX)活性、绿原酸和木质素含量在互作早期已开始显著增加 ,而亲和性互作品种则较晚才发生 ,其POD、PAL和LOX活性、绿原酸和木质素含量也远低于非亲和性互作品种。绿原酸积累与PAL活性呈正相关 ; 展开更多
关键词 稻瘟菌 激发子csb 水稻 诱导抗病性 防御酶 过氧化物酶 苯丙氨酸解氨酶 脂氧合酶 绿原酸 木质素
在线阅读 下载PDF
融合D-InSAR和Offset-tracking技术的矿区沉降信息提取 被引量:7
19
作者 刘沂轩 杨俊凯 +2 位作者 范洪冬 杜珍应 曹久立 《河南理工大学学报(自然科学版)》 CAS 北大核心 2017年第5期47-52,共6页
矿区开采沉陷具有沉降速度快、量值大的特点,针对使用合成孔径雷达干涉测量(InSAR)技术很难正确获取煤炭开采引起的地表下沉全盆地信息的问题,提出融合D-InSAR和Offset-tracking技术提取矿区沉降信息的方法。试验以陕西某矿52304工作面... 矿区开采沉陷具有沉降速度快、量值大的特点,针对使用合成孔径雷达干涉测量(InSAR)技术很难正确获取煤炭开采引起的地表下沉全盆地信息的问题,提出融合D-InSAR和Offset-tracking技术提取矿区沉降信息的方法。试验以陕西某矿52304工作面为例,分别采用D-InSAR和Offset_tracking技术提取了下沉盆地微小及大梯度形变信息,分析了D-InSAR中失相干问题和Offset_tracking的监测优势,最后将两者得到的结果进行融合,获取了工作面上方的时序形变图,实例中最大下沉处的相对误差为0.5%~7.3%。结果表明,Offset-tracking可以有效解决D-InSAR无法监测矿区大梯度沉降的问题,该方法可为矿区开采沉陷监测提供新的技术手段。 展开更多
关键词 D-INSAR offset-tracking 开采沉陷 矿区沉陷信息
在线阅读 下载PDF
Quadrature error and offset error suppression circuitry for silicon micro-gyroscope 被引量:2
20
作者 杨波 周百令 王寿荣 《Journal of Southeast University(English Edition)》 EI CAS 2008年第4期487-491,共5页
The reasons for inducing quadrature error and offset error are analyzed and the expressions of quadrature error and offset error are induced. The open-loop system analysis indicates that, in order to avoid the appeara... The reasons for inducing quadrature error and offset error are analyzed and the expressions of quadrature error and offset error are induced. The open-loop system analysis indicates that, in order to avoid the appearance of harmonic peaks, the frequency difference δf between drive mode and sense mode must be less than 1/(2Qy). In order to eliminate the effects of the quadrature error and the offset error, as well as the inherent non- linearity in the capacitance-type sensors, a closed-loop feedback control circuit with quadrature correction is designed. The experimental results indicate that the quadrature error and offset error are corrected. By comparing with open-loop detection, the closed-loop feedback control circuit with quadrature correction decreases the non-linearity of the scale factor from 16. 02% to 0. 35 %, widens the maximum rate capability from ± 270 (°)/s to ± 370 (°)/s and increases the stability of zero bias from 155. 2 (°)/h to 60. 6 (°)/h. 展开更多
关键词 silicon micro-gyroscope (SMG) quadrature error offset error closed-loop feedback stability of zero bias
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部