期刊文献+
共找到39篇文章
< 1 2 >
每页显示 20 50 100
Far-field vector-diffraction of off-axis parabolic mirror under oblique incidence 被引量:2
1
作者 Xia-Hui Zeng Xi-Yao Chen 《Chinese Physics B》 SCIE EI CAS CSCD 2020年第3期190-201,共12页
Based on a full vector-diffraction theory, a detailed theoretical study is carried out, aiming at providing a clear insight into the effects of different focusing and off-axis parabola parameters on far-field vector-d... Based on a full vector-diffraction theory, a detailed theoretical study is carried out, aiming at providing a clear insight into the effects of different focusing and off-axis parabola parameters on far-field vector-diffraction properties of an offaxis parabolic mirror in the presence of misalignments of the incoming beam. The physical origin of these effects is also explored. The results show that the far-field intensity profile is altered by the distortion-, coma-, and astigmatism-like aberrations, which are caused by oblique incidence rather than inherent aberrations for the off-axis configuration. The radius of 90% encircled energy also increases but does not change monotonically with incident beam size increasing, or rather,it first decreases and then increases. The focal shift strongly depends on the effective focal length and oblique incidence angle, but it is almost independent of the beam size, which affects the focusing spot patterns. The intensity distribution produces a higher astigmatic image with off-axis angle increasing. Coma-like aberration starts to become dominant with beam size increasing and results in larger curved propagation trajectory. The incident polarization also affects the intensity distribution. The variation in the Strehl ratio with oblique incidence angle strongly depends on the misalignment direction and beam size as well. In addition, we find that the difference in locus between the catacaustic and the diffraction focus in the meridian is small. But the locus of the sagittal foci is obviously different from the locus of the meridian foci and the catacaustic focus. Moreover, the peak intensity of the sagittal focus is maximum, and the ratio of the peak intensity to that in the meridian plane is approximately 1.5. Understanding these effects is valuable for assessing a practical focused intensity and describing the motion of charged particles under a strong electric field in ultraintense laser–matter interaction. 展开更多
关键词 laser beam focusing off-axis PARABOLIC mirror vector-diffraction theory oblique incidence
原文传递
Rectangular Bronze Mirror with Dragon and Phoenix Pattern Decorations and Five Hangers
2
作者 de-rui tan 《China Foundry》 SCIE 2018年第6期I0001-I0002,共2页
The back of the mirror is mainly decorated with dragon patterns,in which the head of the dragon is perking up.and the body of the dragon stretches freely.This is the largest ancient copper mirror ever seen.The bronze ... The back of the mirror is mainly decorated with dragon patterns,in which the head of the dragon is perking up.and the body of the dragon stretches freely.This is the largest ancient copper mirror ever seen.The bronze mirror is used to reflect the human image.SO the surface must be bright and fiat.For sucha casting with a large flat surface,it is extremely difficult to control the mirror surface without warpingdeformation. 展开更多
关键词 rectangular BRONZE mirror PHOENIX Pattern Decorations FIVE Hangers
在线阅读 下载PDF
Wavelength-Tunable Rectangular Pulses Generated from All-Fiber Mode-Locked Laser Based on Semiconductor Saturable Absorber Mirror
3
作者 王兆坤 邹峰 +2 位作者 王子薇 杜松涛 周军 《Chinese Physics Letters》 SCIE CAS CSCD 2016年第9期60-63,共4页
The wavelength-tunable rectangular mode-locking operation is demonstrated in an all-fiber laser based on semi- conductor saturable absorber mirror. As the dissipative soliton resonance signature, the pulse duration va... The wavelength-tunable rectangular mode-locking operation is demonstrated in an all-fiber laser based on semi- conductor saturable absorber mirror. As the dissipative soliton resonance signature, the pulse duration varies from 5SOps to 2.1 ns as a function o~ the increasing pump power. Correspondingly, the maximum pulse energy is 9.11 n3. Moreover, it is found that the wavelength tunable operation with a range of approximately 10 nm could be obtained by properly adjusting the polarization controllers. The characteristics of the rectangular pulses at different wavelengths are similar to each other. The demonstration of the wavelength tunable rectangular pulses would be beneficial to some applications for many fields such as spectroscopy and sensing research. 展开更多
关键词 DSR in of mode Wavelength-Tunable rectangular Pulses Generated from All-Fiber Mode-Locked Laser Based on Semiconductor Saturable Absorber mirror from on
原文传递
Nonparaxial propagation of a vectorial apertured off-axis Lorentz beam
4
作者 周国泉 《Chinese Physics B》 SCIE EI CAS CSCD 2009年第5期1853-1860,共8页
Based on the vectorial Ftayleigh-Sommerfeld integral formula and the complex Gaussian expansion of the hardedge aperture function, an analytical propagation expression for a nonparaxial vectorial off-axis Lorentz beam... Based on the vectorial Ftayleigh-Sommerfeld integral formula and the complex Gaussian expansion of the hardedge aperture function, an analytical propagation expression for a nonparaxial vectorial off-axis Lorentz beam passing through a rectangular aperture is derived. The unapertured case, the far field expression and the scalar paraxial result are also presented as special cases of the general formulae, respectively. Some numerical examples are also given to show the propagation characteristics of a nonparaxial vectorial off-axis Lorentz beam through a rectangular aperture. It is indicated that the f parameter, the off-axis displacement and the truncation parameter all play an important role in determining nonparaxial propagation behaviour. 展开更多
关键词 vectorial Rayleigh-Sommerfeld integral nonparaxial vectorial off-axis Lorentz beam rectangular aperture
原文传递
Intra-cycle depolarization of ultraintense laser pulses focused by off-axis parabolic mirrors 被引量:2
5
作者 Luca Labate Gianluca Vantaggiato Leonida A.Gizzi 《High Power Laser Science and Engineering》 SCIE CAS CSCD 2018年第2期141-148,共8页
A study of the structure of the electric and magnetic fields of ultraintense laser pulses focused by an off-axis parabolic mirror is reported. At first, a theoretical model is laid out, whose final equations integrati... A study of the structure of the electric and magnetic fields of ultraintense laser pulses focused by an off-axis parabolic mirror is reported. At first, a theoretical model is laid out, whose final equations integration allows the space and time structure of the fields to be retrieved. The model is then employed to investigate the field patterns at different times within the optical cycle, for off-axis parabola parameters normally employed in the context of ultraintense laser–plasma interaction experiments. The results show that nontrivial, complex electromagnetic field patterns are observed at the time at which the electric and magnetic fields are supposed to vanish. The importance of this effect is then studied for different laser polarizations, f numbers and off-axis angles. 展开更多
关键词 laser-driven particle acceleration laser focusing off-axis parabolic mirrors ultrashort laser pulses
原文传递
Configuration optimization of off-axis parabolic mirror for enhancing the focusability of a laser beam 被引量:1
6
作者 Xiahui Zeng 《Chinese Optics Letters》 SCIE EI CAS CSCD 2021年第3期80-85,共6页
We demonstrate a configuration optimization process of an off-axis parabolic mirror to maximize the focused peak intensity based on a precise knowledge of the tight focusing properties by using a full vector-diffracti... We demonstrate a configuration optimization process of an off-axis parabolic mirror to maximize the focused peak intensity based on a precise knowledge of the tight focusing properties by using a full vector-diffraction theory and obtain an optimum configuration scaling rule, which makes it possible to achieve the maximum peak intensity. In addition, we also carry out an assessment analysis of the offset and off-axis angle tolerances corresponding to a 5% drop of the maximum focused peak intensity and present scaling laws for the tolerances of the offset and off-axis angle. Understanding these scaling laws is important to enhance the focusability of a laser beam by an off-axis parabolic mirror in the optimum configuration, in particular, which is valuable for structural design and selection of an off-axis parabolic mirror in ultrashort and ultraintense laser–matter interaction experiments. 展开更多
关键词 off-axis parabolic mirror laser focusing vector-diffraction theory configuration optimization
原文传递
空间长条形反射镜背部三支撑点的设置 被引量:13
7
作者 朱俊青 沙巍 +2 位作者 陈长征 张星祥 任建岳 《光学精密工程》 EI CAS CSCD 北大核心 2015年第9期2562-2569,共8页
采用背部三点支撑方式的空间光学遥感器长条形反射镜目前尚无普遍适用的支撑点设置方法,只能对某一确定尺寸和长宽比的反射镜进行专门设计。本文提出了基于规则模型的、以参数化模型为核心的集成参数化设计方法,并建立了长条形实体反射... 采用背部三点支撑方式的空间光学遥感器长条形反射镜目前尚无普遍适用的支撑点设置方法,只能对某一确定尺寸和长宽比的反射镜进行专门设计。本文提出了基于规则模型的、以参数化模型为核心的集成参数化设计方法,并建立了长条形实体反射镜背部三点支撑集成参数化模型。在集成环境中通过试验设计、响应面分析等方法对设计参数进行了分析和优化,结果表明在轴向重力工况,镜面面形峰谷(PV)值优于λ/10(λ=632.5nm)的设计要求下,长条形碳化硅反射镜背部三点支撑的最大适用尺寸为1m。文中给出了最优支撑点布置,并确定了厚径比最优为1/10。最后,对集成参数化分析方法进行了精度分析,结果显示该方法整体误差为6.13%。提出的方法确定了空间长条镜背部三点支撑的适用范围,提供了支撑点最佳布置,为空间相机不同尺寸要求的长条镜设计打下了基础。 展开更多
关键词 空间光学遥感器 空间反射镜 长条形反射镜 参数化设计 集成优化 背部支撑
在线阅读 下载PDF
高精度轻型长条形反射镜多点支撑方案 被引量:20
8
作者 吴清文 陶家生 宋朝晖 《光学精密工程》 EI CAS CSCD 1999年第6期61-65,共5页
轻型、大视场、高分辨力可见光空间遥感器的研制已成为空间光学工作者的重点研究课题。本文结合某研究项目拟探讨高精度长条形反射镜的多点支撑方案及其实施,重点论述其研究过程和方法。
关键词 长条形 反射镜 多点支撑方案 空间遥感器
在线阅读 下载PDF
大长宽比长条形SiC反射镜的优化设计与试验 被引量:6
9
作者 魏磊 张雷 +1 位作者 李宗轩 马冬梅 《光子学报》 EI CAS CSCD 北大核心 2017年第3期130-136,共7页
针对某离轴三反光学系统中的大长宽比长条形SiC反射镜镜面边缘随机振动加速度响应均方根值过大的特点,提出一种采用"基结构法"的反射镜结构拓扑优化方法,以随机振动加速度响应均方根值最小化为优化目标.首先对某初始反射镜结... 针对某离轴三反光学系统中的大长宽比长条形SiC反射镜镜面边缘随机振动加速度响应均方根值过大的特点,提出一种采用"基结构法"的反射镜结构拓扑优化方法,以随机振动加速度响应均方根值最小化为优化目标.首先对某初始反射镜结构进行有限元分析,发现反射镜镜面边缘点Z向加速度响应均方根值过大.其次,应用连续体结构拓扑优化思想,以反射镜镜面边缘点的随机振动加速度响应均方根值作为优化目标,以镜面峰谷值、镜体一阶约束频率作为约束条件,以反射镜筋板式基结构作为优化空间,对反射镜镜体结构进行拓扑优化设计,得到了一种各项力学性能指标及面形精度均满足指标要求的反射镜轻量化结构.最后,通过有限元分析与振动试验,验证了本文设计的反射镜结构拥有良好的力学性能,其中反射镜镜体质量相比优化前降低了13%,镜面边缘点的Z向随机振动加速度响应均方根值降低了58%,证明了本文优化方法的有效性. 展开更多
关键词 长条形反射镜 面形精度 拓扑优化 随机振动 轻量化
在线阅读 下载PDF
长条形SiC空间反射镜轻量化结构优化设计 被引量:6
10
作者 齐光 李景林 +1 位作者 王书新 任建岳 《光电工程》 CAS CSCD 北大核心 2012年第2期43-47,共5页
在保证空间光学遥感相机反射镜结构刚度、面形精度的同时,最大限度的降低反射镜质量,成为各国新兴的、重要的研究课题。本文从材料、支撑形式、相关几何参数以及轻量化结构形式等方面对反射镜进行详细设计。提出了通过拓扑优化确定反射... 在保证空间光学遥感相机反射镜结构刚度、面形精度的同时,最大限度的降低反射镜质量,成为各国新兴的、重要的研究课题。本文从材料、支撑形式、相关几何参数以及轻量化结构形式等方面对反射镜进行详细设计。提出了通过拓扑优化确定反射镜背部轻量化形式的方案。采用有限元分析法对获得的优化结果进行分析。分析结果表明:重力载荷下面形精度达到λ/10PV,λ/50RMS(λ=632.8nm),PV值7nm,RMS值1.68nm,反射镜组件一阶固有频率256Hz,均优于传统结构形式的反射镜,能够满足应用要求。 展开更多
关键词 空间相机 长条形反射镜 轻量化 有限元分析
在线阅读 下载PDF
长条形反射镜体轻量化结构的参数优化设计 被引量:6
11
作者 吴清彬 陈时锦 董申 《光学技术》 CAS CSCD 2003年第1期76-78,82,共4页
提出了一种对长条形反射镜轻量化结构进行优化设计的方法。利用ANSYS软件建立反射镜体结构的参数化模型,将有关结构参数变量指定为优化设计变量,以反射镜体在地面重力作用下的镜面变形误差以及在承受发射过载时所产生的最大VonMises应... 提出了一种对长条形反射镜轻量化结构进行优化设计的方法。利用ANSYS软件建立反射镜体结构的参数化模型,将有关结构参数变量指定为优化设计变量,以反射镜体在地面重力作用下的镜面变形误差以及在承受发射过载时所产生的最大VonMises应力作为约束条件,结合有限元法对镜体轻量化结构的尺寸参数进行优化分析,得到了轻量化程度高,镜面变形误差完全满足设计要求的反射镜体。 展开更多
关键词 长条形反射镜 参数优化设计 有限元分析 轻量化 遥感
原文传递
大口径离轴长条形反射镜的检测支撑机构 被引量:5
12
作者 杨帅 沙巍 +2 位作者 陈长征 张星祥 任建岳 《光学精密工程》 EI CAS CSCD 北大核心 2015年第10期2835-2842,共8页
针对大口径离轴长条形反射镜光轴水平向检测的需要,设计了一套检测支撑结构。优化了结构参数,实现了由支撑结构引起的镜面面形误差最小化。通过比较长条形反射镜光轴水平向检测支撑的级联多点支撑结构,选择了结构简单、扩展性和调整性... 针对大口径离轴长条形反射镜光轴水平向检测的需要,设计了一套检测支撑结构。优化了结构参数,实现了由支撑结构引起的镜面面形误差最小化。通过比较长条形反射镜光轴水平向检测支撑的级联多点支撑结构,选择了结构简单、扩展性和调整性优良的两点单层固定支撑结构。利用集成仿真与优化方法,分析计算反射镜镜面面形误差随支撑间隔的变化趋势,确定了最优支撑间隔。最后,利用干涉仪结合补偿器的检测方式,对不同支撑间隔工况下镜面面形进行检测,验证了仿真分析的可靠性。结果表明:在支撑间隔为564mm时,由检测支撑引起的镜面面形误差最小(RMS=8.26nm),干涉检测得到的镜面面形误差随支撑间隔的变化趋势与仿真得到的趋势相符,仿真结果可靠性高。提出的方法可实施性好,可推广到其他大口径离轴长条形反射镜的设计和检测中,为离轴三反(TMA)相机的设计提供技术基础。 展开更多
关键词 离轴长条形反射镜 检测支撑 面形误差 集成仿真与优化 离轴三反相机
在线阅读 下载PDF
大口径长条形反射镜组件自重变形的仿真与试验 被引量:4
13
作者 董得义 李志来 +3 位作者 薛栋林 张学军 樊延超 庞新源 《光学精密工程》 EI CAS CSCD 北大核心 2016年第6期1424-1431,共8页
研究了空间光学遥感器的大口径长条形反射镜组件在自重载荷作用下的面形变化,实验验证和定量分析了Zernike多项式拟合法以及球面方程拟合法得到的仿真分析结果的精度。介绍了Zernike多项式拟合法以及球面方程拟合法的基本原理,分别用这... 研究了空间光学遥感器的大口径长条形反射镜组件在自重载荷作用下的面形变化,实验验证和定量分析了Zernike多项式拟合法以及球面方程拟合法得到的仿真分析结果的精度。介绍了Zernike多项式拟合法以及球面方程拟合法的基本原理,分别用这两种算法对大口径长条形反射镜组件在自重载荷作用下的面形变化进行了仿真分析。根据误差合成原理,提出了依据翻转前后两个状态的面形检测结果计算镜面面形变化的方法;针对离轴反射镜在面形检测过程中存在离轴量与镜面像散互相补偿的现象,求解了离轴量变化量与镜面像散的关系。试验结果显示:Zernike多项式拟合法的计算精度为74.2%,而球面方程拟合法的计算精度为12.6%;对仿真分析结果的误差评价表明,采用有限元法得到的仿真分析结果的理论精度值为10%左右,与球面方程拟合方法的计算精度12.6%基本吻合。研究表明,由于Zernike多项式拟合法自身的局限性,不适合对长条形反射镜面形变化进行拟合,而球面方程拟合法的计算精度能够满足工程要求。 展开更多
关键词 空间光学遥感器 大口径反射镜 长条形反射镜 自重变形 仿真分析 Zernike多项式拟合 球面方程拟合
在线阅读 下载PDF
长条形反射镜的集成优化设计 被引量:6
14
作者 袁健 沙巍 +2 位作者 陈长征 张星祥 任建岳 《光电工程》 CAS CSCD 北大核心 2015年第6期85-89,94,共6页
离轴三反系统(TMA)在具有高分辨率、大视场的空间遥感器中被广泛使用,长条形反射镜作为TMA系统中的核心元件,其自身的性能直接影响遥感器的成像质量。本文在传统反射镜轻量化结构的基础上,为改善反射面局部面形质量,提出一种变筋厚设计... 离轴三反系统(TMA)在具有高分辨率、大视场的空间遥感器中被广泛使用,长条形反射镜作为TMA系统中的核心元件,其自身的性能直接影响遥感器的成像质量。本文在传统反射镜轻量化结构的基础上,为改善反射面局部面形质量,提出一种变筋厚设计方案;为了确定各结构参数的最佳取值,将反射面的面形精度和镜体质量同时作为目标函数,采用邻域培植多目标遗传算法(Neighborhood Cultivation Genetic Algorithm,NCGA)对其进行集成优化求解;结合制造工艺的约束,调整并确定该反射镜最终的设计方案。在z向1 g工况下,优化后的反射镜RMS值为1.278 nm、PV值为5.642 nm,分别较初始结构(RMS=1.947 nm,PV=8.349 nm)降低了34.4%和32.4%,且质量比初始结构略有减轻,从而兼顾了面形精度和镜体质量。这说明本文所提出的轻量化方案和结构参数确定方法适用于TMA系统中长条形反射镜轻量化结构的设计,对今后相关元件的研制具有一定的参考价值。 展开更多
关键词 集成优化设计 长条形反射镜 轻量化结构 变筋厚设计 多目标优化
在线阅读 下载PDF
1.8 m空间长条反射镜柔性支撑技术研究 被引量:5
15
作者 李宗轩 张昌昊 +2 位作者 张德福 马斌 李云峰 《中国光学(中英文)》 EI CAS CSCD 北大核心 2022年第5期1079-1091,共13页
1.8 m×0.5 m口径的长条形主反射镜是某空间离轴三反光学系统的重要光学元件,其面形精度的好坏是决定光学系统在轨成像质量的关键。为保证主镜组件结构的稳定性、可靠性及反射镜的面形精度,提出一种适用于大尺寸长条形反射镜的双轴... 1.8 m×0.5 m口径的长条形主反射镜是某空间离轴三反光学系统的重要光学元件,其面形精度的好坏是决定光学系统在轨成像质量的关键。为保证主镜组件结构的稳定性、可靠性及反射镜的面形精度,提出一种适用于大尺寸长条形反射镜的双轴柔性支撑结构。首先,基于运动学等效原理提出双轴柔性支撑的初始结构,建立了柔性环节刚度数学模型并研究了其刚度特性。然后,对柔性支撑的安装位置进行了参数化研究并对柔性支撑的关键尺寸进行了优化设计。最后,确定了反射镜组件的最终设计方案。仿真与试验结果表明,反射镜组件一阶固有频率为104 Hz。X/Y两个光轴分别对径向施加1 G重力时面形精度RMS值分别为4.81 nm、6.09 nm,优于λ/50(λ=632.8 nm),均满足设计要求。组件正样动力学环境试验表明,反射镜组件的动力学特性良好,柔性支撑系统稳定可靠,与仿真结果一致。目前反射镜全口径面形精度已加工至λ/30 RMS,并在此精度下进行了自重0°/180°的±1 G面形检测试验,结果显示其稳定性良好。 展开更多
关键词 空间光学 离轴三反光学系统 长条反射镜 柔性支撑 有限元方法 动力学实验
在线阅读 下载PDF
长条形空间反射镜轻量化及其支撑结构设计 被引量:9
16
作者 关英俊 辛宏伟 《激光与红外》 CAS CSCD 北大核心 2010年第11期1245-1249,共5页
为保证空间反射镜在空间应用环境中保持高位置精度和面形精度,实现良好成像,从结构材料的选择、反射镜轻量化设计及支撑结构设计三个方面对某长条形空间反射镜进行了详细的结构设计。提出了一种底面局部开口、三角形加强筋的轻量化形式... 为保证空间反射镜在空间应用环境中保持高位置精度和面形精度,实现良好成像,从结构材料的选择、反射镜轻量化设计及支撑结构设计三个方面对某长条形空间反射镜进行了详细的结构设计。提出了一种底面局部开口、三角形加强筋的轻量化形式,反射镜采用背部三点支撑方案,通过合理设计柔性支撑结构参数,使反射镜保证了高刚度和热尺寸稳定性要求。采用有限元法对反射镜系统进行了静、动态特性和热特性分析。分析结果表明:自重及5℃均匀温变载荷工况下,反射镜面形精度达到λ/10 PV,λ/50 RMS(λ=632.8 nm);反射镜组件一阶固有频率230 Hz,具有足够高的动静态刚度和热尺寸稳定性,满足空间应用要求。 展开更多
关键词 空间相机 长条形反射镜 柔性支撑 轻量化 有限元分析
在线阅读 下载PDF
类矩形盾构隧道上穿施工引起既有隧道剪切错台变形研究 被引量:10
17
作者 傅鹤林 于归 +2 位作者 邓皇适 吴疆 张凯源 《中南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2022年第10期3923-3935,共13页
基于镜像法和Mindlin解,建立类矩形盾构隧道上穿施工计算模型,推导出土体损失、盾构正面推力、盾壳摩擦力和注浆压力在既有隧道轴线处产生的附加应力计算公式。采用剪切错台模型将既有隧道简化为由剪切弹簧连接的弹性地基短梁,运用最小... 基于镜像法和Mindlin解,建立类矩形盾构隧道上穿施工计算模型,推导出土体损失、盾构正面推力、盾壳摩擦力和注浆压力在既有隧道轴线处产生的附加应力计算公式。采用剪切错台模型将既有隧道简化为由剪切弹簧连接的弹性地基短梁,运用最小势能原理得出既有隧道的竖向位移计算公式。依托工程实例,对比理论计算结果和数值模拟结果,验证本文计算方法的适用性。最后,分析既有隧道的竖向位移、环间错台量和剪切力随掘进施工的变化过程,并对工程中的关键参数进行敏感性分析。研究结果表明:相比于Winker地基梁模型,剪切错台模型计算结果与数值模拟结果更接近,验证了本文计算公式的正确性;随着新建隧道掘进,既有隧道的隆起变形、环间错台量和剪切力不断增大,在盾构机通过既有隧道轴线20 m后趋于稳定;在既有隧道隆起变形最大处,环间错台量和剪切力最小;在隆起变形曲线反弯点处,环间错台量和剪切力最大;随着隧道矩形长边宽度和土体损失间隙增大,既有隧道隆起变形增加,隆起拱宽度增加;随着既有隧道埋深增加,隆起变形减小,隆起拱宽度变化不明显。 展开更多
关键词 类矩形盾构隧道 既有隧道 上穿施工 镜像法 MINDLIN解 剪切错台模型
在线阅读 下载PDF
长条形空间反射镜镜体及其支撑结构设计 被引量:4
18
作者 王晓宇 周平伟 《长春理工大学学报(自然科学版)》 2017年第2期6-9,13,共5页
为了满足长条形空间反射镜的设计要求,从结构材料的选择、镜厚比确定、支撑方式与最佳支撑点位置的选择以及镜体轻量化等方面进行了详细的镜体结构设计。设计了一种空间反射镜柔性支撑结构,以满足温度载荷与装配误差0.05mm工况下镜体面... 为了满足长条形空间反射镜的设计要求,从结构材料的选择、镜厚比确定、支撑方式与最佳支撑点位置的选择以及镜体轻量化等方面进行了详细的镜体结构设计。设计了一种空间反射镜柔性支撑结构,以满足温度载荷与装配误差0.05mm工况下镜体面形精度的要求。利用有限元分析软件对反射镜组件进行分析,反射镜组件在Z向1g重力、4℃温升以及0.05mm强制位移三种工况耦合作用下的面形误差峰谷值PV为20.5nm,均方根值RMS为4.75nm,优于PV值小于λ10,RMS值小于λ50的设计指标。组件一阶频率141.83Hz,满足动态刚度要求。组件分析结果表明,反射镜及其支撑结构设计合理,满足空间应用要求。 展开更多
关键词 长条形空间反射镜 支撑点位置 柔性支撑 有限元分析
在线阅读 下载PDF
汉规矩镜纹样在女性化妆品包装设计中的应用 被引量:11
19
作者 杨晓燕 王美玲 杜越 《包装工程》 CAS 北大核心 2018年第6期69-73,共5页
目的将传统纹样元素运用到现代化妆品的包装设计中,使设计方案从图案、色彩、主题等方面都能体现传统文化的内涵。方法通过对铜镜艺术特征及文化进行分析,结合现代图形的构成法则进行重新解构设计,提出传统纹样衍生并再设计的图形创意方... 目的将传统纹样元素运用到现代化妆品的包装设计中,使设计方案从图案、色彩、主题等方面都能体现传统文化的内涵。方法通过对铜镜艺术特征及文化进行分析,结合现代图形的构成法则进行重新解构设计,提出传统纹样衍生并再设计的图形创意方法,实现了传统图形与现代流行风格的融合,最后以创作案例予以验证。结论将传统装饰图案与现代女性化妆品的包装风格相结合,不仅能使设计对象体现出汉文化的魅力,还可以实现汉文化的传承与创新。 展开更多
关键词 汉规矩铜镜 纹样衍生设计 分割构成 传统与现代 女性化妆品包装
在线阅读 下载PDF
具有圆柱内导体的屏蔽矩形板线的阻抗问题 被引量:3
20
作者 蒋仁培 《微波学报》 CSCD 北大核心 1997年第1期43-51,57,共10页
本文提出用镜象法导出具有圆柱形内导体的各种电(磁)壁屏蔽矩形板线的特性阻抗公式;并给出四种屏蔽矩形板线特性阻抗的近似公式。用这两种方法计算出的特性阻抗和用有限元法软件(Ansoft)计算结果或用其他方法算出的结果作了多种比... 本文提出用镜象法导出具有圆柱形内导体的各种电(磁)壁屏蔽矩形板线的特性阻抗公式;并给出四种屏蔽矩形板线特性阻抗的近似公式。用这两种方法计算出的特性阻抗和用有限元法软件(Ansoft)计算结果或用其他方法算出的结果作了多种比较,相互颇为一致。本文还提出了用镜象法推广到多内导体屏蔽矩形板线的情况,计算出多导体的模阻抗、耦合阻抗,从而得到自电容和耦合电容的表示式,其结果和Ansoft的静电场软件计算出的电容矩阵数值结果作了对比.证实了镜象法在多导体问题上也是成功的。 展开更多
关键词 镜象法 屏蔽矩形板线 模阻抗 多内导体 耦合电容
在线阅读 下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部