This study presents a calibration process of three-dimensional particle flow code(PFC3D)simulation of intact and fissured granite samples.First,laboratory stressestrain response from triaxial testing of intact and fis...This study presents a calibration process of three-dimensional particle flow code(PFC3D)simulation of intact and fissured granite samples.First,laboratory stressestrain response from triaxial testing of intact and fissured granite samples is recalled.Then,PFC3D is introduced,with focus on the bonded particle models(BPM).After that,we present previous studies where intact rock is simulated by means of flatjoint approaches,and how improved accuracy was gained with the help of parametric studies.Then,models of the pre-fissured rock specimens were generated,including modeled fissures in the form of“smooth joint”type contacts.Finally,triaxial testing simulations of 1 t 2 and 2 t 3 jointed rock specimens were performed.Results show that both elastic behavior and the peak strength levels are closely matched,without any additional fine tuning of micro-mechanical parameters.Concerning the postfailure behavior,models reproduce the trends of decreasing dilation with increasing confinement and plasticity.However,the dilation values simulated are larger than those observed in practice.This is attributed to the difficulty in modeling some phenomena of fissured rock behaviors,such as rock piece corner crushing with dust production and interactions between newly formed shear bands or axial splitting cracks with pre-existing joints.展开更多
Chokes are one of the most important components of downhole flow-control equipment. The particle erosion mathematical model, which considers particle-particle interaction, was established and used to simulate solid pa...Chokes are one of the most important components of downhole flow-control equipment. The particle erosion mathematical model, which considers particle-particle interaction, was established and used to simulate solid particle movement as well as particle erosion characteristics of the solid-liquid two-phase flow in a choke. The corresponding erosion reduction approach by setting ribs on the inner wall of the choke was advanced. This mathematical model includes three parts： the flow field simulation of the continuous carrier fluid by an Eulerian approach, the particle interaction simulation using the discrete particle hard sphere model by a Lagrangian approach and calculation of erosion rate using semiempirical correlations. The results show that particles accumulated in a narrow region from inlet to outlet of the choke and the dominating factor affecting particle motion is the fluid drag force. As a result, the optimization of rib geometrical parameters indicates that good anti-erosion performance can be achieved by four ribs, each of them with a height （H） of 3 mm and a width （B） of 5 mm equaling the interval between ribs （L）.展开更多
In this work,by establishing a three-dimensional physical model of a 1000-ton industrial multi-jet combustion reactor,a hexahedral structured grid was used to discretize the model.Combined with realizable k–εmodel,e...In this work,by establishing a three-dimensional physical model of a 1000-ton industrial multi-jet combustion reactor,a hexahedral structured grid was used to discretize the model.Combined with realizable k–εmodel,eddy-dissipation-concept,discrete-ordinate radiation model,hydrogen 19-step detailed reaction mechanism,air age user-defined-function,velocity field,temperature field,concentration field and gas arrival time in the reactor were numerically simulated.The Euler–Lagrange method combined with the discrete-phase-model was used to reveal the flow characteristics of particles in the reactor,and based on this,the effects of the reactor aspect ratios,central jet gas velocity and particle size on the flow field characteristics and particle back-mixing degree in the reactor were investigated.The results show that with the decrease of aspect ratio in the combustion reactors,the velocity and temperature attenuation in the reactor are intensified,the vortex phenomenon is aggravated,and the residence time distribution of nanoparticles is more dispersed.With the increase in the central jet gas velocities in reactors,the vortex lengthens along the axis,the turbulence intensity increases,and the residence time of particles decreases.The back-mixing degree and residence time of particles in the reactor also decrease with the increase in particle size.The simulation results can provide reference for the structural regulation of nanoparticles and the structural design of combustion reactor in the process of gas combustion synthesis.展开更多
Microbially induced calcium carbonate precipitation(MICP)technology can induce calcium carbonate crystals with cementation and stable performance in the process of microbial metabolism or enzymization through the regu...Microbially induced calcium carbonate precipitation(MICP)technology can induce calcium carbonate crystals with cementation and stable performance in the process of microbial metabolism or enzymization through the regulation of environmental factors MICP can be used as a cementing agent to cement cohesionless sand particles to form the materials with the characteristics of higher strength,better durability and environmental friendli-ness,as well as a good engineering application prospect.In this paper,the shear strength of sand column was tested by triaxial compression tests,and the strength index was obtained.In order to further study the micro-strength mechanism and the failure process,based on the discrete element method,a numerical model of MICP cemented sand column was established considering the factors of matrix soil particle gradation,particle mor-phology,content ratio of induced calcium carbonate,pore distribution characteristics,inter-particle cementation and so on.The failure process of MICP cemented sand column under load was analysed by numerical simulation,and the reliability of the numerical model was tested by combining with the stress intensity curve of samples under test conditions.The results indicate that compared with the actual triaxial tests of MICP cemented sand column,although there are deviations in stress and strain,cohesion and internal friction angle,the numerical simulation shows similar development law and intensity amplitude,and the same failure trend.The work in this paper verifies the reliability of the numerical model and provides a theoretical basis for the subsequent analysis of the factors influencing the geotechnical mechanical properties of biomineralized materials.展开更多
The alignment of elongated fibers and thin disks is known to be significantly influenced by the presence of fluid coherent structures in near-wall turbulence(Cui et al.2021).However,this earlier study is confined to t...The alignment of elongated fibers and thin disks is known to be significantly influenced by the presence of fluid coherent structures in near-wall turbulence(Cui et al.2021).However,this earlier study is confined to the spheroids with infinitely large or small aspect ratio,and the shape effect of finite aspect ratio on the alignment is not considered.The current study investigates the shape-dependent alignment of inertialess spheroids in structure-dominated regions of channel flow.With utilizing an ensemble-averaged approach for identifying the structure-dominated regions,we analyze the eigensystem of the linear term matrix in the Jeffery equation,which is governed by both particle shape and local fluid velocity gradients.In contrast to earlier conventional analysis based on local vorticity and strain rate,our findings demonstrate that the eigensystem of the Jeffery equation offers a convenient,effective,and universal framework for predicting the alignment behavior of inertialess spheroids in turbulent flows.By leveraging the eigensystem of the Jeffery equation,we uncover a diverse effect of fluid coherent structures on spheroid alignment with different particle shapes.Furthermore,we provide explanations for both shape-independent alignments observed in vortical-core regions and shape-dependent alignments around near-wall streamwise vortices.展开更多
Circulating fluidized bed flue gas desulfurization(CFB-FGD) process has been widely applied in recent years. However, high cost caused by the use of high-quality slaked lime and difficult operation due to the complex ...Circulating fluidized bed flue gas desulfurization(CFB-FGD) process has been widely applied in recent years. However, high cost caused by the use of high-quality slaked lime and difficult operation due to the complex flow field are two issues which have received great attention. Accordingly, a laboratory-scale fluidized bed reactor was constructed to investigate the effects of physical properties and external conditions on desulfurization performance of slaked lime, and the conclusions were tried out in an industrial-scale CFB-FGD tower. After that, a numerical model of the tower was established based on computational particle fluid dynamics(CPFD) and two-film theory. After comparison and validation with actual operation data, the effects of operating parameters on gas-solid distribution and desulfurization characteristics were investigated. The results of experiments and industrial trials showed that the use of slaked lime with a calcium hydroxide content of approximately 80% and particle size greater than 40 μm could significantly reduce the cost of desulfurizer. Simulation results showed that the flow field in the desulfurization tower was skewed under the influence of circulating ash. We obtained optimal operating conditions of 7.5 kg·s^(-1)for the atomized water flow, 70 kg·s^(-1)for circulating ash flow, and 0.56 kg·s^(-1)for slaked lime flow, with desulfurization efficiency reaching 98.19% and the exit flue gas meeting the ultraclean emission and safety requirements. All parameters selected in the simulation were based on engineering examples and had certain application reference significance.展开更多
A mathematical study of particle flow on a banana screen deck using the discrete element method (DEM) was presented in this paper. The motion characteristics and penetrating mechanisms of particles on the screen deck ...A mathematical study of particle flow on a banana screen deck using the discrete element method (DEM) was presented in this paper. The motion characteristics and penetrating mechanisms of particles on the screen deck were studied. Effects of geometric parameters of screen deck on banana screening process were also investigated. The results show that when the values of inclination of discharge and increment of screen deck inclination are 10° and 5° respectively, the banana screening process get a good screening performance in the simulation. The relationship between screen deck length and screening efficiency was further confirmed. The conclusion that the screening efficiency will not significantly increase when the deck length L≥430 mm (L/B ≥ 3.5) was obtained, which can provide theoretical basis for the optimization of banana screen.展开更多
The particle simulation method is used to solve free-surface slurry flow problems that may be encountered in several scientific and engineering fields.The main idea behind the use of the particle simulation method is ...The particle simulation method is used to solve free-surface slurry flow problems that may be encountered in several scientific and engineering fields.The main idea behind the use of the particle simulation method is to treat granular or other materials as an assembly of many particles.Compared with the continuum-mechanics-based numerical methods such as the finite element and finite volume methods,the movement of each particle is accurately described in the particle simulation method so that the free surface of a slurry flow problem can be automatically obtained.The major advantage of using the particle simulation method is that only a simple numerical algorithm is needed to solve the governing equation of a particle simulation system.For the purpose of illustrating how to use the particle simulation method to solve free-surface flow problems,three examples involving slurry flow on three different types of river beds have been considered.The related particle simulation results obtained from these three examples have demonstrated that:1) The particle simulation method is a promising and useful method for solving free-surface flow problems encountered in both the scientific and engineering fields;2) The shape and irregular roughness of a river bed can have a significant effect on the free surface morphologies of slurry flow when it passes through the river bed.展开更多
Based on the Eulerian-Lagrangian approach,a mathematical model was established to describe the gas-liquid flow behavior in the Ruhrstahl-Heraeus(RH)degasser.The momentum source and the turbulent kinetic energy source ...Based on the Eulerian-Lagrangian approach,a mathematical model was established to describe the gas-liquid flow behavior in the Ruhrstahl-Heraeus(RH)degasser.The momentum source and the turbulent kinetic energy source due to the motion of gas bubbles were considered for the liquid flow.The effect of the expansion of gas bubbles on the liquid velocity,recirculation rate,and mixing time was quantitatively evaluated.After the fluid flow reached the steady state,the melting and mixing processes of aluminum alloys in the RH degasser were also investigated.The results indicate that the expansion of gas bubbles has a significant infuence on the recirculation rate and the mixing time in the RH process.Increasing the superheat of liquid steel and decreasing the initial diameter of alloy particles are beneficial to promote the melting and mixing of alloy particles.Due to the existence of solidified steel shells,the maximum diameter of the alloy particle is about 1.5 times its initial diameter.展开更多
The underground or open-pit methods are used for the extraction of mineral resources,each of which is divided into different categories.Coal is one of the mineral resources,which is exploited either by the surface or ...The underground or open-pit methods are used for the extraction of mineral resources,each of which is divided into different categories.Coal is one of the mineral resources,which is exploited either by the surface or the underground methods.The long-wall mining is one of the methods for the underground coal mining.In this method,which is a mechanized one,some machines such as the shearer or plow are used for the mining.The coal mine in Parvadeh,Tabas is a mechanized mine that is extracted by the long-wall mining.The modeling with particle flow code software was used in this mine for the evaluation of plow performance using the coal specifications.In this regard,the sample was first calibrated by sampling from the Parvadeh coal mine and performing the uniaxial and Brazilian tests on the model.Then,the modeling was done by constructing the model and using the variables such as the clearance angle and the linear velocity of the plow.After making 28 models for the plow,the best model of the plow was selected based on the maximum force applied to the machine in the X direction.Finally,the results of this study showed that the best plow performance is for a model with the clearance angle of zero and the linear velocity of 9 mm/min,and the maximum force applied to this model is equal to 39,000 kN in the X direction.展开更多
The orientation distribution function of cylindrical particle suspensions was deduced and numerically simulated, and an application was taken in a wedge-shaped flow field. The relationship between the orientation dist...The orientation distribution function of cylindrical particle suspensions was deduced and numerically simulated, and an application was taken in a wedge-shaped flow field. The relationship between the orientation distribution function and particle orientation angles was obtained. The results show that comparing with the most probable angle distribution which comes to being in short time, the distribution of the steady state doesn't vary much. in range; the main difference is the anti-clockwise rotation in the right and upper field, that is, particles rotate more at the points where the velocity gradients are larger. The most probable orientations are close to the direction of local streamlines. In the direction of streamlines, with poleradius decreasing, the most probable angles increase, but the angles between their orientations and the local streamlines decrease.展开更多
An improved CFD model of gas flow and particle interception in a fiber material which fiber size is Y-shape was developed in this work. The porous medium model was used to build the model of the whole size of fiber fi...An improved CFD model of gas flow and particle interception in a fiber material which fiber size is Y-shape was developed in this work. The porous medium model was used to build the model of the whole size of fiber filter medium. Mixture model was adopted. The algorithm of particle interception in the whole size of fiber filter medium was derived and UDF(User Defined Function) that described kinds of particle filtering mechanisms in filter fibrous media was added to the Fluent default conservation equation as source term for simulation. The inertial resistance of the filter was taken into consideration, which provided a more precise measurement of the smoke flow and the particle interception in the filter under higher smoke speed conditions. The commercial software, Fluent 6.3, was used to simulate the smoke flow and particle interception in the filter in a single suction. The velocity and pressure profiles of smoke or nicotine particle in the filter, as well as nicotine particle volume fraction profile were well simulated. Finally, the comparisons of nicotine particle filtration efficiency between Fluent simulation results in this work and experimental results, as well as the model prediction in the literature were made to validate the simulation model. The comparisons showed that the particle entrapment model from simulation results was in good agreement with that from the experimental results. In addition, the Fluent simulation results are closer to reality both at the beginning and the end of the smoke process comparing with the model predicted results in the literature.展开更多
The formation of self-organizing single-line particle train in a channel flow of a power-law fluid is studied using the lattice Boltzmann method with power-law index 0.6≤n≤1.2,particle volume concentration 0.8%≤Φ...The formation of self-organizing single-line particle train in a channel flow of a power-law fluid is studied using the lattice Boltzmann method with power-law index 0.6≤n≤1.2,particle volume concentration 0.8%≤Φ≤6.4%,Reynolds number 10≤Re≤100,and blockage ratio 0.2≤k≤0.4.The numerical method is validated by comparing the present results with the previous ones.The effect n,Φ,Re and k on the interparticle spacing and parallelism of particle train is discussed.The results showed that the randomly distributed particles would migrate towards the vicinity of the equilibrium position and form the ordered particle train in the power-law fluid.The equilibrium position of particles is closer to the channel centerline in the shear-thickening fluid than that in the Newtonian fluid and shear-thinning fluid.The particles are not perfectly parallel in the equilibrium position,hence IH is used to describe the inclination of the line linking the equilibrium position of each particle.When self-organizing single-line particle train is formed,the particle train has a better parallelism and hence benefit for particle focusing in the shearthickening fluid at highΦ,low Re and small k.Meanwhile,the interparticle spacing is the largest and hence benefit for particle separation in the shear-thinning fluid at lowΦ,low Re and small k.展开更多
Numerical research on the dilute particles movement and deposition characteristics in the vicinity of converging slot-hole(console) was carried out, and the effect of hole shape on the particle deposition characterist...Numerical research on the dilute particles movement and deposition characteristics in the vicinity of converging slot-hole(console) was carried out, and the effect of hole shape on the particle deposition characteristics was investigated. The EI-Batsh deposition model was used to predict the particle deposition characteristics. The results show that the console hole has an obvious advantage in reducing particle deposition in comparison with cylindrical hole, especially under higher blowing ratio. The coolant jet from console holes can cover the wall well. Furthermore, the rotation direction of vortices near console hole is contrary to that near cylindrical hole. For console holes, particle deposition mainly takes place in the upstream area of the holes.展开更多
We successfully perform the three-dimensional tracking in a turbulent fluid flow of small axisymmetrical particles that are neutrally-buoyant and bottom-heavy,i.e.,they have a non-homogeneous mass distribu-tion along ...We successfully perform the three-dimensional tracking in a turbulent fluid flow of small axisymmetrical particles that are neutrally-buoyant and bottom-heavy,i.e.,they have a non-homogeneous mass distribu-tion along their symmetry axis.We experimentally show how a tiny mass inhomogeneity can affect the particle orientation along the preferred vertical direction and modify its tumbling rate.The experiment is complemented by a series of simulations based on realistic Navier-Stokes turbulence and on a point-like particle model that is capable to explore the full range of parameter space characterized by the gravi-tational torque stability number and by the particle aspect ratio.We propose a theoretical perturbative prediction valid in the high bottom-heaviness regime that agrees well with the observed preferential ori-entation and tumbling rate of the particles.We also show that the heavy-tail shape of the probability distribution function of the tumbling rate is weakly affected by the bottom-heaviness of the particles.展开更多
Single-channel sewage pumps are generally used to transport solid-liquid two-phase media consisting of a fluid and solid particles due to the good non-clogging property of such devices.However,the non-axisymmetric str...Single-channel sewage pumps are generally used to transport solid-liquid two-phase media consisting of a fluid and solid particles due to the good non-clogging property of such devices.However,the non-axisymmetric structure of the impeller of this type of pumps generally induces flow asymmetry,oscillatory outflow during operations,and hydraulic imbalance.In severe cases,these effects can jeopardize the safety and stability of the overall pump.In the present study,such a problem is investigated in the framework of a Mixture multiphase flow method coupled with a RNG turbulence model used to determine the structure of the flow field and the related motion of transported particles.It is shown that under different inlet particle concentrations,the flow field in the pump exhibits periodic variations of the pressure.The volume fraction of solid particles at the trailing edge of the suction surface of the blade is the largest,and solid particles tend to be concentrated at the outer edge of the pump body.With a rise in import particle content,the pressure and volume fraction of particles in the sewage pump also increase;for a fixed inlet particle concentration,the pressure pulsation amplitude increases with an increase in the flow rate.In addition,under small flow conditions,as the inlet particle concentration increases,the flow field leaving the sewage pump diaphragm near the outlet of the volute becomes more turbulent,and even a secondary back-flow vortex appears.展开更多
The dynamic and thermal performance of particle-laden turbulent flow is investigated via direction numerical simulation combined with the Lagrangian point-particle tracking under the condition of two-way coupling, wit...The dynamic and thermal performance of particle-laden turbulent flow is investigated via direction numerical simulation combined with the Lagrangian point-particle tracking under the condition of two-way coupling, with a focus on the contributions of particle feedback effect to momentum and heat transfer of turbulence. We take into account the effects of particles on flow drag and Nusselt number and explore the possibility of drag reduction in conjunction with heat transfer enhancement in particle-laden turbulent flows. The effects of particles on momentum and heat transfer are analyzed, and the possibility of drag reduction in conjunction with heat transfer enhancement for the prototypical case of particle-laden turbulent channel flows is addressed. We present results of turbulence modification and heat transfer in turbulent particle-laden channel flow, which shows the heat transfer reduction when large inertial particles with low specific heat capacity are added to the flow. However, we also found an enhancement of the heat transfer and a small reduction of the flow drag when particles with high specific heat capacity are involved. The present results show that particles, which are active agents, interact not only with the velocity field, but also the temperature field and can cause a dissimilarity in momentum and heat transport. This demonstrates that the possibility to increase heat transfer and suppress friction drag can be achieved with addition of particles with different thermal properties.展开更多
Slurry jets in a static uniform environment were simulated with a two-phase mixture model in which flow-particle interactions were considered. A standard k-e turbulence model was chosen to close the governing equation...Slurry jets in a static uniform environment were simulated with a two-phase mixture model in which flow-particle interactions were considered. A standard k-e turbulence model was chosen to close the governing equations. The computational results were in agreement with previous laboratory measurements. The characteristics of the two-phase flow field and the influences of hydraulic and geometric parameters on the distribution of the slurry jets were analyzed on the basis of the computational results. The calculated results reveal that if the initial velocity of the slurry jet is high, the jet spreads less in the radial direction. When the slurry jet is less influenced by the ambient fluid （when the Stokes number St is relatively large）, the turbulent kinetic energy k and turbulent dissipation rate e, which are relatively concentrated around the jet axis, decrease more rapidly after the slurry jet passes through the nozzle. For different values of St, the radial distributions of streamwise velocity and particle volume fraction are both self-similar and fit a Gaussian profile after the slurry jet fully develops. The decay rate of the particle velocity is lower than that of water velocity along the jet axis, and the axial distributions of the centerline particle streamwise velocity are self-similar along the jet axis. The pattern of particle dispersion depends on the Stokes number St. When St = 0.39, the panicle dispersion along the radial direction is considerable, and the relative velocity is very low due to the low dynamic response time. When St = 3.08, the dispersion of particles along the radial direction is very little, and most of the particles have high relative velocities along the streamwise direction.展开更多
Based on numerical method, effects of silt particle with certain silt mean diameter and silt concentration on the evolution of cavitation in a centrifugal pump were studied. Silt mean diameter 0.005 mm and silt concen...Based on numerical method, effects of silt particle with certain silt mean diameter and silt concentration on the evolution of cavitation in a centrifugal pump were studied. Silt mean diameter 0.005 mm and silt concentration 1.0% were adopted in numerical simulations. Cavitation flow in a flat- nosed cylinder was simulated to validate the designed algorithm. Cavitaton flows of water and silt-laden water were simulated and compared. The results indicate that the silt particles promote the evolution of cavitation. At the outlet pressure of 6.0×10^5 Pa, cavitation bubbles do not exist in the water flow, but a few cavitation bubbles appeare in the silt-laden water flow, demonstrating the silt particles induce the formation of cavitation bubbles. At the outlet pressure of 5.29×10^5 Pa, the vapor volume fraction in the silt-laden water flow is much larger than that in the water flow, indicating that the silt particles enhance the evolution of cavitation. The properties of silt particle, static pressure, flow field structure, turbulent kinetic energy and density difference have a close relationship with the evolution of cavitation.展开更多
A direct-forcing fictitious domain(DFFD) method is used to perform fully resolved numerical simulations of turbulent channel flows laden with large neutrally buoyant particles. The effects of the particles on the turb...A direct-forcing fictitious domain(DFFD) method is used to perform fully resolved numerical simulations of turbulent channel flows laden with large neutrally buoyant particles. The effects of the particles on the turbulence(including the mean velocity,the root mean square(RMS) of the velocity fluctuation, the probability density function(PDF) of the velocity, and the vortex structures) at a friction Reynolds number of 395 are investigated. The results show that the drag-reduction effect caused by finite-size spherical particles at low particle volumes is negligibly small. The particle effects on the RMS velocities at Re_τ = 395 are significantly smaller than those at Re_τ = 180, despite qualitatively the same effects, i.e., the presence of particles decreases the maximum streamwise RMS velocity near the wall via weakening the large-scale streamwise vortices,and increases the transverse and spanwise RMS velocities in the vicinity of the wall by inducing smaller-scale vortices. The effects of the particles on the PDFs of the fluid fluctuating velocities normalized with the RMS velocities are small, regardless of the particle size, the particle volume fraction, and the Reynolds number.展开更多
基金The University of Vigo is acknowledged for financing part of the first author’s PhD studiesthe Spanish Ministry of Economy and Competitiveness for funding of the project‘Deepening on the behaviour of rock masses:Scale effects on the stressestrain response of fissured rock samples with particular emphasis on post-failure’,awarded under Contract Reference No.RTI2018-093563-B-I00partially financed by means of European Regional Development Funds from the European Union(EU)。
文摘This study presents a calibration process of three-dimensional particle flow code(PFC3D)simulation of intact and fissured granite samples.First,laboratory stressestrain response from triaxial testing of intact and fissured granite samples is recalled.Then,PFC3D is introduced,with focus on the bonded particle models(BPM).After that,we present previous studies where intact rock is simulated by means of flatjoint approaches,and how improved accuracy was gained with the help of parametric studies.Then,models of the pre-fissured rock specimens were generated,including modeled fissures in the form of“smooth joint”type contacts.Finally,triaxial testing simulations of 1 t 2 and 2 t 3 jointed rock specimens were performed.Results show that both elastic behavior and the peak strength levels are closely matched,without any additional fine tuning of micro-mechanical parameters.Concerning the postfailure behavior,models reproduce the trends of decreasing dilation with increasing confinement and plasticity.However,the dilation values simulated are larger than those observed in practice.This is attributed to the difficulty in modeling some phenomena of fissured rock behaviors,such as rock piece corner crushing with dust production and interactions between newly formed shear bands or axial splitting cracks with pre-existing joints.
基金supported by the Fund of Innovation Research Group of National Natural Science Foundation of China (Grant NO.5052160450323001)Major Program of National Natural Science Foundation of China (Grant No.50536020)
文摘Chokes are one of the most important components of downhole flow-control equipment. The particle erosion mathematical model, which considers particle-particle interaction, was established and used to simulate solid particle movement as well as particle erosion characteristics of the solid-liquid two-phase flow in a choke. The corresponding erosion reduction approach by setting ribs on the inner wall of the choke was advanced. This mathematical model includes three parts： the flow field simulation of the continuous carrier fluid by an Eulerian approach, the particle interaction simulation using the discrete particle hard sphere model by a Lagrangian approach and calculation of erosion rate using semiempirical correlations. The results show that particles accumulated in a narrow region from inlet to outlet of the choke and the dominating factor affecting particle motion is the fluid drag force. As a result, the optimization of rib geometrical parameters indicates that good anti-erosion performance can be achieved by four ribs, each of them with a height （H） of 3 mm and a width （B） of 5 mm equaling the interval between ribs （L）.
基金supported by the National Natural Science Foundation of China(21978088,91534202,51673063)Shanghai Technology Research Leader(20XD1433600)+4 种基金the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutes of High Learningthe Basic Research Program of Shanghai(17JC1402300)the Shanghai City Board of education research and innovation projectthe Fundamental Research Funds for the Central Universities(222201718002)provided by Feringa Nobel Prize Scientist Joint Research Center。
文摘In this work,by establishing a three-dimensional physical model of a 1000-ton industrial multi-jet combustion reactor,a hexahedral structured grid was used to discretize the model.Combined with realizable k–εmodel,eddy-dissipation-concept,discrete-ordinate radiation model,hydrogen 19-step detailed reaction mechanism,air age user-defined-function,velocity field,temperature field,concentration field and gas arrival time in the reactor were numerically simulated.The Euler–Lagrange method combined with the discrete-phase-model was used to reveal the flow characteristics of particles in the reactor,and based on this,the effects of the reactor aspect ratios,central jet gas velocity and particle size on the flow field characteristics and particle back-mixing degree in the reactor were investigated.The results show that with the decrease of aspect ratio in the combustion reactors,the velocity and temperature attenuation in the reactor are intensified,the vortex phenomenon is aggravated,and the residence time distribution of nanoparticles is more dispersed.With the increase in the central jet gas velocities in reactors,the vortex lengthens along the axis,the turbulence intensity increases,and the residence time of particles decreases.The back-mixing degree and residence time of particles in the reactor also decrease with the increase in particle size.The simulation results can provide reference for the structural regulation of nanoparticles and the structural design of combustion reactor in the process of gas combustion synthesis.
基金sponsored by the National Natural Science Foundation of China(Grant No.12002173,12262027)Research start-up project of Inner Mongolia University of Technology(No.2200000924)key Lab.of University of Geological Hazards and Geotechnical Engineering Defense in Sandy and Drought Regions,Inner Mongolia Autonomous.
文摘Microbially induced calcium carbonate precipitation(MICP)technology can induce calcium carbonate crystals with cementation and stable performance in the process of microbial metabolism or enzymization through the regulation of environmental factors MICP can be used as a cementing agent to cement cohesionless sand particles to form the materials with the characteristics of higher strength,better durability and environmental friendli-ness,as well as a good engineering application prospect.In this paper,the shear strength of sand column was tested by triaxial compression tests,and the strength index was obtained.In order to further study the micro-strength mechanism and the failure process,based on the discrete element method,a numerical model of MICP cemented sand column was established considering the factors of matrix soil particle gradation,particle mor-phology,content ratio of induced calcium carbonate,pore distribution characteristics,inter-particle cementation and so on.The failure process of MICP cemented sand column under load was analysed by numerical simulation,and the reliability of the numerical model was tested by combining with the stress intensity curve of samples under test conditions.The results indicate that compared with the actual triaxial tests of MICP cemented sand column,although there are deviations in stress and strain,cohesion and internal friction angle,the numerical simulation shows similar development law and intensity amplitude,and the same failure trend.The work in this paper verifies the reliability of the numerical model and provides a theoretical basis for the subsequent analysis of the factors influencing the geotechnical mechanical properties of biomineralized materials.
基金supported by the Natural Science Foundation of China(Grant Nos.92252104,92252204,12388101,and 12302285)the China Postdoctoral Science Foundation(Grant No.2022M721849).
文摘The alignment of elongated fibers and thin disks is known to be significantly influenced by the presence of fluid coherent structures in near-wall turbulence(Cui et al.2021).However,this earlier study is confined to the spheroids with infinitely large or small aspect ratio,and the shape effect of finite aspect ratio on the alignment is not considered.The current study investigates the shape-dependent alignment of inertialess spheroids in structure-dominated regions of channel flow.With utilizing an ensemble-averaged approach for identifying the structure-dominated regions,we analyze the eigensystem of the linear term matrix in the Jeffery equation,which is governed by both particle shape and local fluid velocity gradients.In contrast to earlier conventional analysis based on local vorticity and strain rate,our findings demonstrate that the eigensystem of the Jeffery equation offers a convenient,effective,and universal framework for predicting the alignment behavior of inertialess spheroids in turbulent flows.By leveraging the eigensystem of the Jeffery equation,we uncover a diverse effect of fluid coherent structures on spheroid alignment with different particle shapes.Furthermore,we provide explanations for both shape-independent alignments observed in vortical-core regions and shape-dependent alignments around near-wall streamwise vortices.
基金supported by National Natural Science Foundation of China(52336005 and 52106133).
文摘Circulating fluidized bed flue gas desulfurization(CFB-FGD) process has been widely applied in recent years. However, high cost caused by the use of high-quality slaked lime and difficult operation due to the complex flow field are two issues which have received great attention. Accordingly, a laboratory-scale fluidized bed reactor was constructed to investigate the effects of physical properties and external conditions on desulfurization performance of slaked lime, and the conclusions were tried out in an industrial-scale CFB-FGD tower. After that, a numerical model of the tower was established based on computational particle fluid dynamics(CPFD) and two-film theory. After comparison and validation with actual operation data, the effects of operating parameters on gas-solid distribution and desulfurization characteristics were investigated. The results of experiments and industrial trials showed that the use of slaked lime with a calcium hydroxide content of approximately 80% and particle size greater than 40 μm could significantly reduce the cost of desulfurizer. Simulation results showed that the flow field in the desulfurization tower was skewed under the influence of circulating ash. We obtained optimal operating conditions of 7.5 kg·s^(-1)for the atomized water flow, 70 kg·s^(-1)for circulating ash flow, and 0.56 kg·s^(-1)for slaked lime flow, with desulfurization efficiency reaching 98.19% and the exit flue gas meeting the ultraclean emission and safety requirements. All parameters selected in the simulation were based on engineering examples and had certain application reference significance.
基金financial support from the National Natural Science Foundation of China (No. 51204181)the Research Fund for the Doctoral Program of Higher Education of China (No. 20110095120004)+2 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Fundamental Research Funds for the Central Universities (Nos. 2011QNA10 and 2010QNB17)the China Postdoctoral Science Foundation (No. 20110491485)
文摘A mathematical study of particle flow on a banana screen deck using the discrete element method (DEM) was presented in this paper. The motion characteristics and penetrating mechanisms of particles on the screen deck were studied. Effects of geometric parameters of screen deck on banana screening process were also investigated. The results show that when the values of inclination of discharge and increment of screen deck inclination are 10° and 5° respectively, the banana screening process get a good screening performance in the simulation. The relationship between screen deck length and screening efficiency was further confirmed. The conclusion that the screening efficiency will not significantly increase when the deck length L≥430 mm (L/B ≥ 3.5) was obtained, which can provide theoretical basis for the optimization of banana screen.
基金Project(11272359)supported by the National Natural Science Foundation of China
文摘The particle simulation method is used to solve free-surface slurry flow problems that may be encountered in several scientific and engineering fields.The main idea behind the use of the particle simulation method is to treat granular or other materials as an assembly of many particles.Compared with the continuum-mechanics-based numerical methods such as the finite element and finite volume methods,the movement of each particle is accurately described in the particle simulation method so that the free surface of a slurry flow problem can be automatically obtained.The major advantage of using the particle simulation method is that only a simple numerical algorithm is needed to solve the governing equation of a particle simulation system.For the purpose of illustrating how to use the particle simulation method to solve free-surface flow problems,three examples involving slurry flow on three different types of river beds have been considered.The related particle simulation results obtained from these three examples have demonstrated that:1) The particle simulation method is a promising and useful method for solving free-surface flow problems encountered in both the scientific and engineering fields;2) The shape and irregular roughness of a river bed can have a significant effect on the free surface morphologies of slurry flow when it passes through the river bed.
基金support from the Open Fund of Anhui Province Key Laboratory of Metallurgical Engineering&Resources Recycling(Anhui University of Technol-ogy)(SKF21-05)the Open Fund of State Key Laboratory of New technology of Iron and Steel Metallurgy(KF21-03)the National Natural Science Foundation of China(Grant Nos.51704005 and 51804003).
文摘Based on the Eulerian-Lagrangian approach,a mathematical model was established to describe the gas-liquid flow behavior in the Ruhrstahl-Heraeus(RH)degasser.The momentum source and the turbulent kinetic energy source due to the motion of gas bubbles were considered for the liquid flow.The effect of the expansion of gas bubbles on the liquid velocity,recirculation rate,and mixing time was quantitatively evaluated.After the fluid flow reached the steady state,the melting and mixing processes of aluminum alloys in the RH degasser were also investigated.The results indicate that the expansion of gas bubbles has a significant infuence on the recirculation rate and the mixing time in the RH process.Increasing the superheat of liquid steel and decreasing the initial diameter of alloy particles are beneficial to promote the melting and mixing of alloy particles.Due to the existence of solidified steel shells,the maximum diameter of the alloy particle is about 1.5 times its initial diameter.
文摘The underground or open-pit methods are used for the extraction of mineral resources,each of which is divided into different categories.Coal is one of the mineral resources,which is exploited either by the surface or the underground methods.The long-wall mining is one of the methods for the underground coal mining.In this method,which is a mechanized one,some machines such as the shearer or plow are used for the mining.The coal mine in Parvadeh,Tabas is a mechanized mine that is extracted by the long-wall mining.The modeling with particle flow code software was used in this mine for the evaluation of plow performance using the coal specifications.In this regard,the sample was first calibrated by sampling from the Parvadeh coal mine and performing the uniaxial and Brazilian tests on the model.Then,the modeling was done by constructing the model and using the variables such as the clearance angle and the linear velocity of the plow.After making 28 models for the plow,the best model of the plow was selected based on the maximum force applied to the machine in the X direction.Finally,the results of this study showed that the best plow performance is for a model with the clearance angle of zero and the linear velocity of 9 mm/min,and the maximum force applied to this model is equal to 39,000 kN in the X direction.
文摘The orientation distribution function of cylindrical particle suspensions was deduced and numerically simulated, and an application was taken in a wedge-shaped flow field. The relationship between the orientation distribution function and particle orientation angles was obtained. The results show that comparing with the most probable angle distribution which comes to being in short time, the distribution of the steady state doesn't vary much. in range; the main difference is the anti-clockwise rotation in the right and upper field, that is, particles rotate more at the points where the velocity gradients are larger. The most probable orientations are close to the direction of local streamlines. In the direction of streamlines, with poleradius decreasing, the most probable angles increase, but the angles between their orientations and the local streamlines decrease.
基金Supported by Technology Center,China Tobacco Hunan Industrial Co.,Ltd.(KY2014KF0002)the National Natural Science Foundation of China(21536003)+2 种基金Innovative Research Team Development Plan-Ministry of Education of China(IRT1238)Key project of international®ional scientific and technology plan(2014WK2037)China Outstanding Engineer Training Plan for Students of Chemical Engineering&Technology in Hunan University(2011-40)
文摘An improved CFD model of gas flow and particle interception in a fiber material which fiber size is Y-shape was developed in this work. The porous medium model was used to build the model of the whole size of fiber filter medium. Mixture model was adopted. The algorithm of particle interception in the whole size of fiber filter medium was derived and UDF(User Defined Function) that described kinds of particle filtering mechanisms in filter fibrous media was added to the Fluent default conservation equation as source term for simulation. The inertial resistance of the filter was taken into consideration, which provided a more precise measurement of the smoke flow and the particle interception in the filter under higher smoke speed conditions. The commercial software, Fluent 6.3, was used to simulate the smoke flow and particle interception in the filter in a single suction. The velocity and pressure profiles of smoke or nicotine particle in the filter, as well as nicotine particle volume fraction profile were well simulated. Finally, the comparisons of nicotine particle filtration efficiency between Fluent simulation results in this work and experimental results, as well as the model prediction in the literature were made to validate the simulation model. The comparisons showed that the particle entrapment model from simulation results was in good agreement with that from the experimental results. In addition, the Fluent simulation results are closer to reality both at the beginning and the end of the smoke process comparing with the model predicted results in the literature.
基金supported by the National Natural Science Foundation of China(91852102,11632016)。
文摘The formation of self-organizing single-line particle train in a channel flow of a power-law fluid is studied using the lattice Boltzmann method with power-law index 0.6≤n≤1.2,particle volume concentration 0.8%≤Φ≤6.4%,Reynolds number 10≤Re≤100,and blockage ratio 0.2≤k≤0.4.The numerical method is validated by comparing the present results with the previous ones.The effect n,Φ,Re and k on the interparticle spacing and parallelism of particle train is discussed.The results showed that the randomly distributed particles would migrate towards the vicinity of the equilibrium position and form the ordered particle train in the power-law fluid.The equilibrium position of particles is closer to the channel centerline in the shear-thickening fluid than that in the Newtonian fluid and shear-thinning fluid.The particles are not perfectly parallel in the equilibrium position,hence IH is used to describe the inclination of the line linking the equilibrium position of each particle.When self-organizing single-line particle train is formed,the particle train has a better parallelism and hence benefit for particle focusing in the shearthickening fluid at highΦ,low Re and small k.Meanwhile,the interparticle spacing is the largest and hence benefit for particle separation in the shear-thinning fluid at lowΦ,low Re and small k.
基金Project(51276090) supported by the National Natural Science Foundation of ChinaProject(CXLX13_166) supported by Funding of Jiangsu Innovation Program for Graduate EducationProject supported by the Fundamental Research Funds for the Central Universities,China
文摘Numerical research on the dilute particles movement and deposition characteristics in the vicinity of converging slot-hole(console) was carried out, and the effect of hole shape on the particle deposition characteristics was investigated. The EI-Batsh deposition model was used to predict the particle deposition characteristics. The results show that the console hole has an obvious advantage in reducing particle deposition in comparison with cylindrical hole, especially under higher blowing ratio. The coolant jet from console holes can cover the wall well. Furthermore, the rotation direction of vortices near console hole is contrary to that near cylindrical hole. For console holes, particle deposition mainly takes place in the upstream area of the holes.
基金supported by the National Natural Science Foundation of China (Grant 11988102)
文摘We successfully perform the three-dimensional tracking in a turbulent fluid flow of small axisymmetrical particles that are neutrally-buoyant and bottom-heavy,i.e.,they have a non-homogeneous mass distribu-tion along their symmetry axis.We experimentally show how a tiny mass inhomogeneity can affect the particle orientation along the preferred vertical direction and modify its tumbling rate.The experiment is complemented by a series of simulations based on realistic Navier-Stokes turbulence and on a point-like particle model that is capable to explore the full range of parameter space characterized by the gravi-tational torque stability number and by the particle aspect ratio.We propose a theoretical perturbative prediction valid in the high bottom-heaviness regime that agrees well with the observed preferential ori-entation and tumbling rate of the particles.We also show that the heavy-tail shape of the probability distribution function of the tumbling rate is weakly affected by the bottom-heaviness of the particles.
基金the Welfare Technology Applied Research Project of Zhejiang Province(No.LGG21E090003)Open Research Subject of Research Center on Levee Safety Disaster Prevention,Ministry of Water Resources.
文摘Single-channel sewage pumps are generally used to transport solid-liquid two-phase media consisting of a fluid and solid particles due to the good non-clogging property of such devices.However,the non-axisymmetric structure of the impeller of this type of pumps generally induces flow asymmetry,oscillatory outflow during operations,and hydraulic imbalance.In severe cases,these effects can jeopardize the safety and stability of the overall pump.In the present study,such a problem is investigated in the framework of a Mixture multiphase flow method coupled with a RNG turbulence model used to determine the structure of the flow field and the related motion of transported particles.It is shown that under different inlet particle concentrations,the flow field in the pump exhibits periodic variations of the pressure.The volume fraction of solid particles at the trailing edge of the suction surface of the blade is the largest,and solid particles tend to be concentrated at the outer edge of the pump body.With a rise in import particle content,the pressure and volume fraction of particles in the sewage pump also increase;for a fixed inlet particle concentration,the pressure pulsation amplitude increases with an increase in the flow rate.In addition,under small flow conditions,as the inlet particle concentration increases,the flow field leaving the sewage pump diaphragm near the outlet of the volute becomes more turbulent,and even a secondary back-flow vortex appears.
基金supported by the National Natural Science Foundation of China (Grants 11272198, 11572183)
文摘The dynamic and thermal performance of particle-laden turbulent flow is investigated via direction numerical simulation combined with the Lagrangian point-particle tracking under the condition of two-way coupling, with a focus on the contributions of particle feedback effect to momentum and heat transfer of turbulence. We take into account the effects of particles on flow drag and Nusselt number and explore the possibility of drag reduction in conjunction with heat transfer enhancement in particle-laden turbulent flows. The effects of particles on momentum and heat transfer are analyzed, and the possibility of drag reduction in conjunction with heat transfer enhancement for the prototypical case of particle-laden turbulent channel flows is addressed. We present results of turbulence modification and heat transfer in turbulent particle-laden channel flow, which shows the heat transfer reduction when large inertial particles with low specific heat capacity are added to the flow. However, we also found an enhancement of the heat transfer and a small reduction of the flow drag when particles with high specific heat capacity are involved. The present results show that particles, which are active agents, interact not only with the velocity field, but also the temperature field and can cause a dissimilarity in momentum and heat transport. This demonstrates that the possibility to increase heat transfer and suppress friction drag can be achieved with addition of particles with different thermal properties.
基金supported by the National Natural Science Foundation of China (Grant No. 11172218)the Fundamental Research Funds for the Central Universities (Grant No. 2012206020209)
文摘Slurry jets in a static uniform environment were simulated with a two-phase mixture model in which flow-particle interactions were considered. A standard k-e turbulence model was chosen to close the governing equations. The computational results were in agreement with previous laboratory measurements. The characteristics of the two-phase flow field and the influences of hydraulic and geometric parameters on the distribution of the slurry jets were analyzed on the basis of the computational results. The calculated results reveal that if the initial velocity of the slurry jet is high, the jet spreads less in the radial direction. When the slurry jet is less influenced by the ambient fluid （when the Stokes number St is relatively large）, the turbulent kinetic energy k and turbulent dissipation rate e, which are relatively concentrated around the jet axis, decrease more rapidly after the slurry jet passes through the nozzle. For different values of St, the radial distributions of streamwise velocity and particle volume fraction are both self-similar and fit a Gaussian profile after the slurry jet fully develops. The decay rate of the particle velocity is lower than that of water velocity along the jet axis, and the axial distributions of the centerline particle streamwise velocity are self-similar along the jet axis. The pattern of particle dispersion depends on the Stokes number St. When St = 0.39, the panicle dispersion along the radial direction is considerable, and the relative velocity is very low due to the low dynamic response time. When St = 3.08, the dispersion of particles along the radial direction is very little, and most of the particles have high relative velocities along the streamwise direction.
基金Gansu Province Natural Science Foundation of China(18JR3RA149)
文摘Based on numerical method, effects of silt particle with certain silt mean diameter and silt concentration on the evolution of cavitation in a centrifugal pump were studied. Silt mean diameter 0.005 mm and silt concentration 1.0% were adopted in numerical simulations. Cavitation flow in a flat- nosed cylinder was simulated to validate the designed algorithm. Cavitaton flows of water and silt-laden water were simulated and compared. The results indicate that the silt particles promote the evolution of cavitation. At the outlet pressure of 6.0×10^5 Pa, cavitation bubbles do not exist in the water flow, but a few cavitation bubbles appeare in the silt-laden water flow, demonstrating the silt particles induce the formation of cavitation bubbles. At the outlet pressure of 5.29×10^5 Pa, the vapor volume fraction in the silt-laden water flow is much larger than that in the water flow, indicating that the silt particles enhance the evolution of cavitation. The properties of silt particle, static pressure, flow field structure, turbulent kinetic energy and density difference have a close relationship with the evolution of cavitation.
基金Project supported by the National Natural Science Foundation of China(Nos.91752117,11632016,and 11372275)the Natural Science Foundation of Zhejiang Province of China(No.LY17A020005)
文摘A direct-forcing fictitious domain(DFFD) method is used to perform fully resolved numerical simulations of turbulent channel flows laden with large neutrally buoyant particles. The effects of the particles on the turbulence(including the mean velocity,the root mean square(RMS) of the velocity fluctuation, the probability density function(PDF) of the velocity, and the vortex structures) at a friction Reynolds number of 395 are investigated. The results show that the drag-reduction effect caused by finite-size spherical particles at low particle volumes is negligibly small. The particle effects on the RMS velocities at Re_τ = 395 are significantly smaller than those at Re_τ = 180, despite qualitatively the same effects, i.e., the presence of particles decreases the maximum streamwise RMS velocity near the wall via weakening the large-scale streamwise vortices,and increases the transverse and spanwise RMS velocities in the vicinity of the wall by inducing smaller-scale vortices. The effects of the particles on the PDFs of the fluid fluctuating velocities normalized with the RMS velocities are small, regardless of the particle size, the particle volume fraction, and the Reynolds number.
