Tetrahedrite,an Earth-abundant natural mineral,has attracted extensive research interest because of its excellent thermoelectric performance.Herein,tetrahedrite samples comprising Cu-poor Cu_(12)Sb_(4)S_(13)and Cu-ric...Tetrahedrite,an Earth-abundant natural mineral,has attracted extensive research interest because of its excellent thermoelectric performance.Herein,tetrahedrite samples comprising Cu-poor Cu_(12)Sb_(4)S_(13)and Cu-rich Cu_(14)Sb_(4)S_(13)phases have been synthesized using a colloidal method,in which the ratio of two phases is manipulated by controlling the synthesis temperature to improve the thermoelectric perfor-mance.It is found that an ultralow total thermal conductivity of∼0.3 W m^(−1)K^(−1)at 723 K is realized in the sample with a Cu-rich phase fraction of∼50%,which can be attributed to maximized phonon scattering by phase boundaries.As a result,combined with a decent power factor,this sample obtains an optimal zT of 1.15,which is about 85%higher than that of the sample with a Cu-rich phase fraction of∼64%and comparable to zT values of other eco-friendly,abundant Cu-based thermoelectric materials.This work demonstrates an effective synthesis-temperature-dependent phase composition manipulation strategy toward enhanced thermoelectric performance in tetrahedrites.展开更多
Serial-parallel manipulators are of great interest to academic community in recent years,especially those composed of classical parallel mechanisms.There have been many studies around 2(3RPS)and 2(3SPR)S-PMs,but unfor...Serial-parallel manipulators are of great interest to academic community in recent years,especially those composed of classical parallel mechanisms.There have been many studies around 2(3RPS)and 2(3SPR)S-PMs,but unfortunately their inverse kinematics have not yet been resolved.This paper discovers that the unknown kinematic parameters of middle platform are responsible for the unresolvable of inverse kinematics,meanwhile the unknown kinematic parameters of middle platform also have huge coupling relationships.Therefore,to break through this challenges,the huge coupling relationships are decoupled layer by layer,the kinematic parameters of middle platform are solved by combining Sylvester's elimination method,and the inverse displacements of 2(3RPS)and 2(3SPR)S-PMs are obtained subsequently.This paper not only solves the inverse kinematics of classical 2(3RPS)and 2(3SPR)S-PMs,but also reveals the essence of the inverse kinematics of general(3-DOF)+(3-DOF)6-DOF S-PMs and proposes a corresponding solution.展开更多
Transmission line manipulations in a power system are necessary for the execution of preventative or corrective main- tenance in a network, thus ensuring the stability of the system. In this study, primal-dual interio...Transmission line manipulations in a power system are necessary for the execution of preventative or corrective main- tenance in a network, thus ensuring the stability of the system. In this study, primal-dual interior-point methods are used to minimize costs and losses in the generation and transmission of the predispatch active power flow in a hydroelectric system with previously scheduled line manipulations for preventative maintenance, over a period of twenty-four hours. The matrix structure of this problem and the modification that it imposes on the system is also broached in this study. From the computational standpoint, the effort required to solve a problem with or without line manipulations is similar, and the reasons for this are also discussed in this study. Computational results sustain our findings.展开更多
A cable-driven redundant manipulator(CDRM)characterized by redundant degrees of freedom and a lightweight,slender design can perform tasks in confined and restricted spaces efficiently.However,the complex multistage c...A cable-driven redundant manipulator(CDRM)characterized by redundant degrees of freedom and a lightweight,slender design can perform tasks in confined and restricted spaces efficiently.However,the complex multistage coupling between drive cables and passive joints in CDRM leads to a challenging dynamic model with difficult parameter identification,complicating the efforts to achieve accurate modeling and control.To address these challenges,this paper proposes a dynamic modeling and adaptive control approach tailored for CDRM systems.A multilevel kinematic model of the cable-driven redundant manipulator is presented,and a screw theory is employed to represent the cable tension and cable contact forces as spatial wrenches,which are equivalently mapped to joint torque using the principle of virtual work.This approach simplifies the mapping process while maintaining the integrity of the dynamic model.A recursive method is used to compute cable tension section-by-section for enhancing the efficiency of inverse dynamics calculations and meeting the high-frequency demands of the controller,thereby avoiding large matrix operations.An adaptive control method is proposed building on this foundation,which involves the design of a dynamic parameter adaptive controller in the joint space to simplify the linearization process of the dynamic equations along with a closed-loop controller that incorporates motor parameters in the driving space.This approach improves the control accuracy and dynamic performance of the CDRM under dynamic uncertainties.The accuracy and computational efficiency of the dynamic model are validated through simulations,and the effectiveness of the proposed control method is demonstrated through control tests.This paper presents a dynamic modeling and adaptive control approach for CDRM to enhance accuracy and performance under dynamic uncertainties.展开更多
Objective To compare the difference of clinical efficacy between acupuncture of lifting and pressing manipulation and conventional acupuncture in motor function recovery of hemiplegic upper limb after stroke, so as to...Objective To compare the difference of clinical efficacy between acupuncture of lifting and pressing manipulation and conventional acupuncture in motor function recovery of hemiplegic upper limb after stroke, so as to provide referential support for clinical application. Method Fifty-nine patients with upper limb hemiplegia after stroke were selected and divided into group A （conventional acupuncture ± lifting and pressing manipulation, 30 cases} and group B （conventional acupuncture, 29 cases} according to random number table method. Upper limb motor function and activity of daily living of patients in the two groups were scored before and after treatment, and the results were analyzed and compared. Results The score of upper limb FugI-Meyer motor function of patients was 22.4 ± 2.83 and 32.97 ± 2.92 before and after treatment in group A, and was 19.89 ± 3.13 and 26.62 ± 3.31 before and after treatment in group B, and the difference between the two groups before and after treatment was significant （P〈0.01}. The score of Barthel index of patients was 60.67 ± 4.65 and 73.00 ± 3.82 before and after treatment in group A, and was 50.52 ± 5.15 and 60.17 ± 4.89 before and after treatment in group B, and the difference between the two groups before and after treatment was not statistcally significant {P〉0.05）. Conclusion Lifting and pressing manipulation combined with conventional acupuncture can better improve upper limb motor function of upper limb paralysis of patients after stroke.展开更多
The on-orbit parameter identification of a space structure can be used for the modification of a system dynamics model and controller coefficients. This study focuses on the estimation of a system state-space model fo...The on-orbit parameter identification of a space structure can be used for the modification of a system dynamics model and controller coefficients. This study focuses on the estimation of a system state-space model for a two-link space manipulator in the procedure of capturing an unknown object, and a recursive tracking approach based on the recursive predictor-based subspace identification(RPBSID) algorithm is proposed to identify the manipulator payload mass parameter. Structural rigid motion and elastic vibration are separated, and the dynamics model of the space manipulator is linearized at an arbitrary working point(i.e., a certain manipulator configuration).The state-space model is determined by using the RPBSID algorithm and matrix transformation. In addition, utilizing the identified system state-space model, the manipulator payload mass parameter is estimated by extracting the corresponding block matrix. In numerical simulations, the presented parameter identification method is implemented and compared with the classical algebraic algorithm and the recursive least squares method for different payload masses and manipulator configurations. Numerical results illustrate that the system state-space model and payload mass parameter of the two-link flexible space manipulator are effectively identified by the recursive subspace tracking method.展开更多
In order to present a new method for analyzing the reliability of a two-link flexible robot manipulator,Lagrange dynamics differential equations of the two-link flexible robot manipulator were established by using the...In order to present a new method for analyzing the reliability of a two-link flexible robot manipulator,Lagrange dynamics differential equations of the two-link flexible robot manipulator were established by using the integrated modal method and the multi-body system dynamics method.By using the Monte Carlo method,the random sample values of the dynamic parameters were obtained and Lagrange dynamics differential equations were solved for each random sample value which revealed their displacement,speed and acceleration.On this basis,dynamic stresses and deformations were obtained.By taking the maximum values of the stresses and the deformations as output responses and the random sample values of dynamic parameters as input quantities,extremum response surface functions were established.A number of random samples were then obtained by using the Monte Carlo method and then the reliability was analyzed by using the extremum response surface method.The results show that the extremum response surface method is an efficient and fast reliability analysis method with high-accuracy for the two-link flexible robot manipulator.展开更多
The hemodynamic mechanism of rolling manipulation (RM) of traditional Chinese medical massage (TCMM) is investigated. An axisymmetrical nonlinear model and an arbitrary Lagrangian-Eulerian finite element method (ALE-F...The hemodynamic mechanism of rolling manipulation (RM) of traditional Chinese medical massage (TCMM) is investigated. An axisymmetrical nonlinear model and an arbitrary Lagrangian-Eulerian finite element method (ALE-FEM) with rezoning algorithm were introduced to study the viscous flow through an axisymmetrical rigid tube with axially moving stenosis to simulate the rolling manipulation. Flow rate and wall shear stress were obtained by solving complete Navier-Stokes equations numerically. The numerical results show that the stenosis moving frequency, namely the frequency of rolling manipulation, has great effect on the disturbance of flow and the wall shear stress. The stenosis coefficient, which characterizes the severity of the stenosis, another adjustable parameter in rolling manipulation, also shows the significant effect on flow rate and wall shear stress. These numerical results may provide some data that can be taken into consideration when massage is used in clinic.展开更多
In order to decrease the fluid drag on an underwater robot manipulator, an optimal trajectory method based on the variational method is presented. By introducing the adjoint variables, which are Lagrange multipliers, ...In order to decrease the fluid drag on an underwater robot manipulator, an optimal trajectory method based on the variational method is presented. By introducing the adjoint variables, which are Lagrange multipliers, we formulate a Lagrange function under certain constraints related to the target angle, target angular velocity, and dynamic equation of the robot manipulator. The state equation (the partial differentiation of the Lagrange function with respect to the state variables), adjoint equation (the partial differentiation of the Lagrange function with respect to the adjoint variables), and sensitivity equation (the partial differentiation of the Lagrange function with respect to torques) can be derived from the stationary conditions of the Lagrange function. Using the state equation, we can calculate the state variables (angles, angular velocities, and angular acceleration) at every time step in the forward time direction. These state variables are stored as data at every time step. Next, by using the adjoint equation, we can calculate the adjoint variables by using these state variables at every time step in the backward time direction. These adjoint variables are stored as data at every time step. Third, the sensitivity equation is calculated by using both the state variables and the adjoint variables. Finally, the optimal trajectory of the manipulator is obtained using the sensitivities. The proposed method is applied to the problem of two-link manipulators. It can obtain the optimal drag reduction trajectory of the manipulator under the constraints mentioned above.展开更多
The kinematic accuracy of space manipulator determines whether the spacecraft performs normally or not. Problems pertaining to structural deformation have received increased attention in recent times. In the space man...The kinematic accuracy of space manipulator determines whether the spacecraft performs normally or not. Problems pertaining to structural deformation have received increased attention in recent times. In the space manipulator systems, flexible arms and joints can induce drastic dynamic instabilities. In applications such as the space station, kinematic error due to structural deformation can jointly affect the performance characteristics. And it is crucial for accuracy control of space manipulator to establish a precision index. Here we analyze the dynamics characteristic of flexible space manipulator considering the hysteresis of harmonic reducer based on method of nonconstraint boundary modal. For the sake of describing the output accuracy, we integrate the method of analytic hierarchy process(AHP) to establish a comprehensive evaluation index. A numerical simulation is performed to analyze the nonlinear dynamic characteristics of space manipulator with harmonic reducer. With the analysis of accuracy assessment, the relation among the hysteresis angle, rigidity and output accuracy is revealed. Considering the elastic modulus of flexible space manipulator and the hysteresis angle of harmonic reducer, we conduct an evaluation of output characteristics of flexible space manipulator with the proposed comprehensive evaluation index. The accuracy evaluation of output characteristics based on the proposed comprehensive evaluation index is implemented in the initial stage of space manipulator's design, which can not only solve the problems existing in the design but also save cost savings for ground tests. The results can be used in designing and optimizing future space manipulators, which may provide valuable references for design and thermal control of the space manipulator.展开更多
In order to solve the problems of too large mass,too complex structure and poor flexibility of the 6 DOF manipulator,the topological optimization theory based on variable density method is applied to the 6-DOF manipul...In order to solve the problems of too large mass,too complex structure and poor flexibility of the 6 DOF manipulator,the topological optimization theory based on variable density method is applied to the 6-DOF manipulator,the topology optimization of the main structural components of the manipulator is carried out with the help of the finite element software ANSYS,and the optimized structure is simplified according to the density distribution of the units and the requirements of manufacturability.the results are compared and analysed by static mechanics.It shows that the whole mass of the 6-DOF manipulator is reduced by 47.23%without changing the original mechanical properties after topological optimization,and the optimized model can meet the requirements of manufacturability,the optimization effect is signifcant,which can be used as a reference for the structure optimization of the 6-DOF manipulator.展开更多
A fuzzy adaptive control method is proposed for a flexible robot manipulator. Due to the structure characteristics of the flexible manipulator, the vibration modes must be controlled to realize the high-precision tip ...A fuzzy adaptive control method is proposed for a flexible robot manipulator. Due to the structure characteristics of the flexible manipulator, the vibration modes must be controlled to realize the high-precision tip position. The Lagrangian principle is utilized to model the dynamic function of the single-degree flexible manipulator incorporating the assumed modes method. Simulation results of the fuzzy adaptive control method in the location control and the trajectory tracking with different tip disturbances are presented and compared with the results of the classic PD control. It shows that the controller can obtain the stable and robust performance.展开更多
基金supported by the National Natu-ral Science Foundation of China(Grant Nos.52125103,52071041,52271202,and 12274044).
文摘Tetrahedrite,an Earth-abundant natural mineral,has attracted extensive research interest because of its excellent thermoelectric performance.Herein,tetrahedrite samples comprising Cu-poor Cu_(12)Sb_(4)S_(13)and Cu-rich Cu_(14)Sb_(4)S_(13)phases have been synthesized using a colloidal method,in which the ratio of two phases is manipulated by controlling the synthesis temperature to improve the thermoelectric perfor-mance.It is found that an ultralow total thermal conductivity of∼0.3 W m^(−1)K^(−1)at 723 K is realized in the sample with a Cu-rich phase fraction of∼50%,which can be attributed to maximized phonon scattering by phase boundaries.As a result,combined with a decent power factor,this sample obtains an optimal zT of 1.15,which is about 85%higher than that of the sample with a Cu-rich phase fraction of∼64%and comparable to zT values of other eco-friendly,abundant Cu-based thermoelectric materials.This work demonstrates an effective synthesis-temperature-dependent phase composition manipulation strategy toward enhanced thermoelectric performance in tetrahedrites.
基金Supported by National Natural Science Foundation of China(Grant No.52275033)National Natural Science Youth Foundation of China(Grant No.52205033)Hebei Provincial Natural Science Foundation of China(Grant No.E2021203019)。
文摘Serial-parallel manipulators are of great interest to academic community in recent years,especially those composed of classical parallel mechanisms.There have been many studies around 2(3RPS)and 2(3SPR)S-PMs,but unfortunately their inverse kinematics have not yet been resolved.This paper discovers that the unknown kinematic parameters of middle platform are responsible for the unresolvable of inverse kinematics,meanwhile the unknown kinematic parameters of middle platform also have huge coupling relationships.Therefore,to break through this challenges,the huge coupling relationships are decoupled layer by layer,the kinematic parameters of middle platform are solved by combining Sylvester's elimination method,and the inverse displacements of 2(3RPS)and 2(3SPR)S-PMs are obtained subsequently.This paper not only solves the inverse kinematics of classical 2(3RPS)and 2(3SPR)S-PMs,but also reveals the essence of the inverse kinematics of general(3-DOF)+(3-DOF)6-DOF S-PMs and proposes a corresponding solution.
文摘Transmission line manipulations in a power system are necessary for the execution of preventative or corrective main- tenance in a network, thus ensuring the stability of the system. In this study, primal-dual interior-point methods are used to minimize costs and losses in the generation and transmission of the predispatch active power flow in a hydroelectric system with previously scheduled line manipulations for preventative maintenance, over a period of twenty-four hours. The matrix structure of this problem and the modification that it imposes on the system is also broached in this study. From the computational standpoint, the effort required to solve a problem with or without line manipulations is similar, and the reasons for this are also discussed in this study. Computational results sustain our findings.
基金Supported by National Natural Science Foundation of China(Grant No.52405040)Research Project of State Key Laboratory of Mechanical System and Vibration(Grant No.MSV202514)。
文摘A cable-driven redundant manipulator(CDRM)characterized by redundant degrees of freedom and a lightweight,slender design can perform tasks in confined and restricted spaces efficiently.However,the complex multistage coupling between drive cables and passive joints in CDRM leads to a challenging dynamic model with difficult parameter identification,complicating the efforts to achieve accurate modeling and control.To address these challenges,this paper proposes a dynamic modeling and adaptive control approach tailored for CDRM systems.A multilevel kinematic model of the cable-driven redundant manipulator is presented,and a screw theory is employed to represent the cable tension and cable contact forces as spatial wrenches,which are equivalently mapped to joint torque using the principle of virtual work.This approach simplifies the mapping process while maintaining the integrity of the dynamic model.A recursive method is used to compute cable tension section-by-section for enhancing the efficiency of inverse dynamics calculations and meeting the high-frequency demands of the controller,thereby avoiding large matrix operations.An adaptive control method is proposed building on this foundation,which involves the design of a dynamic parameter adaptive controller in the joint space to simplify the linearization process of the dynamic equations along with a closed-loop controller that incorporates motor parameters in the driving space.This approach improves the control accuracy and dynamic performance of the CDRM under dynamic uncertainties.The accuracy and computational efficiency of the dynamic model are validated through simulations,and the effectiveness of the proposed control method is demonstrated through control tests.This paper presents a dynamic modeling and adaptive control approach for CDRM to enhance accuracy and performance under dynamic uncertainties.
文摘Objective To compare the difference of clinical efficacy between acupuncture of lifting and pressing manipulation and conventional acupuncture in motor function recovery of hemiplegic upper limb after stroke, so as to provide referential support for clinical application. Method Fifty-nine patients with upper limb hemiplegia after stroke were selected and divided into group A （conventional acupuncture ± lifting and pressing manipulation, 30 cases} and group B （conventional acupuncture, 29 cases} according to random number table method. Upper limb motor function and activity of daily living of patients in the two groups were scored before and after treatment, and the results were analyzed and compared. Results The score of upper limb FugI-Meyer motor function of patients was 22.4 ± 2.83 and 32.97 ± 2.92 before and after treatment in group A, and was 19.89 ± 3.13 and 26.62 ± 3.31 before and after treatment in group B, and the difference between the two groups before and after treatment was significant （P〈0.01}. The score of Barthel index of patients was 60.67 ± 4.65 and 73.00 ± 3.82 before and after treatment in group A, and was 50.52 ± 5.15 and 60.17 ± 4.89 before and after treatment in group B, and the difference between the two groups before and after treatment was not statistcally significant {P〉0.05）. Conclusion Lifting and pressing manipulation combined with conventional acupuncture can better improve upper limb motor function of upper limb paralysis of patients after stroke.
基金funded by the National Natural Science Foundation of China (Nos. 11572069 and 51775541)the China Postdoctoral Science Foundation (No. 2016M601354)
文摘The on-orbit parameter identification of a space structure can be used for the modification of a system dynamics model and controller coefficients. This study focuses on the estimation of a system state-space model for a two-link space manipulator in the procedure of capturing an unknown object, and a recursive tracking approach based on the recursive predictor-based subspace identification(RPBSID) algorithm is proposed to identify the manipulator payload mass parameter. Structural rigid motion and elastic vibration are separated, and the dynamics model of the space manipulator is linearized at an arbitrary working point(i.e., a certain manipulator configuration).The state-space model is determined by using the RPBSID algorithm and matrix transformation. In addition, utilizing the identified system state-space model, the manipulator payload mass parameter is estimated by extracting the corresponding block matrix. In numerical simulations, the presented parameter identification method is implemented and compared with the classical algebraic algorithm and the recursive least squares method for different payload masses and manipulator configurations. Numerical results illustrate that the system state-space model and payload mass parameter of the two-link flexible space manipulator are effectively identified by the recursive subspace tracking method.
基金Project(2006AA04Z405)supported by the National High Technology Research and Development Program of ChinaProject(3102019)supported by Beijing Municipal Natural Science Foundation,China
文摘In order to present a new method for analyzing the reliability of a two-link flexible robot manipulator,Lagrange dynamics differential equations of the two-link flexible robot manipulator were established by using the integrated modal method and the multi-body system dynamics method.By using the Monte Carlo method,the random sample values of the dynamic parameters were obtained and Lagrange dynamics differential equations were solved for each random sample value which revealed their displacement,speed and acceleration.On this basis,dynamic stresses and deformations were obtained.By taking the maximum values of the stresses and the deformations as output responses and the random sample values of dynamic parameters as input quantities,extremum response surface functions were established.A number of random samples were then obtained by using the Monte Carlo method and then the reliability was analyzed by using the extremum response surface method.The results show that the extremum response surface method is an efficient and fast reliability analysis method with high-accuracy for the two-link flexible robot manipulator.
基金Project supported by the National Natural Science Foundation of China (No. 30070951)
文摘The hemodynamic mechanism of rolling manipulation (RM) of traditional Chinese medical massage (TCMM) is investigated. An axisymmetrical nonlinear model and an arbitrary Lagrangian-Eulerian finite element method (ALE-FEM) with rezoning algorithm were introduced to study the viscous flow through an axisymmetrical rigid tube with axially moving stenosis to simulate the rolling manipulation. Flow rate and wall shear stress were obtained by solving complete Navier-Stokes equations numerically. The numerical results show that the stenosis moving frequency, namely the frequency of rolling manipulation, has great effect on the disturbance of flow and the wall shear stress. The stenosis coefficient, which characterizes the severity of the stenosis, another adjustable parameter in rolling manipulation, also shows the significant effect on flow rate and wall shear stress. These numerical results may provide some data that can be taken into consideration when massage is used in clinic.
文摘In order to decrease the fluid drag on an underwater robot manipulator, an optimal trajectory method based on the variational method is presented. By introducing the adjoint variables, which are Lagrange multipliers, we formulate a Lagrange function under certain constraints related to the target angle, target angular velocity, and dynamic equation of the robot manipulator. The state equation (the partial differentiation of the Lagrange function with respect to the state variables), adjoint equation (the partial differentiation of the Lagrange function with respect to the adjoint variables), and sensitivity equation (the partial differentiation of the Lagrange function with respect to torques) can be derived from the stationary conditions of the Lagrange function. Using the state equation, we can calculate the state variables (angles, angular velocities, and angular acceleration) at every time step in the forward time direction. These state variables are stored as data at every time step. Next, by using the adjoint equation, we can calculate the adjoint variables by using these state variables at every time step in the backward time direction. These adjoint variables are stored as data at every time step. Third, the sensitivity equation is calculated by using both the state variables and the adjoint variables. Finally, the optimal trajectory of the manipulator is obtained using the sensitivities. The proposed method is applied to the problem of two-link manipulators. It can obtain the optimal drag reduction trajectory of the manipulator under the constraints mentioned above.
文摘The kinematic accuracy of space manipulator determines whether the spacecraft performs normally or not. Problems pertaining to structural deformation have received increased attention in recent times. In the space manipulator systems, flexible arms and joints can induce drastic dynamic instabilities. In applications such as the space station, kinematic error due to structural deformation can jointly affect the performance characteristics. And it is crucial for accuracy control of space manipulator to establish a precision index. Here we analyze the dynamics characteristic of flexible space manipulator considering the hysteresis of harmonic reducer based on method of nonconstraint boundary modal. For the sake of describing the output accuracy, we integrate the method of analytic hierarchy process(AHP) to establish a comprehensive evaluation index. A numerical simulation is performed to analyze the nonlinear dynamic characteristics of space manipulator with harmonic reducer. With the analysis of accuracy assessment, the relation among the hysteresis angle, rigidity and output accuracy is revealed. Considering the elastic modulus of flexible space manipulator and the hysteresis angle of harmonic reducer, we conduct an evaluation of output characteristics of flexible space manipulator with the proposed comprehensive evaluation index. The accuracy evaluation of output characteristics based on the proposed comprehensive evaluation index is implemented in the initial stage of space manipulator's design, which can not only solve the problems existing in the design but also save cost savings for ground tests. The results can be used in designing and optimizing future space manipulators, which may provide valuable references for design and thermal control of the space manipulator.
基金supported in part by China intelligent robot project of firm-universities cooperative R&D under Grant No.2021JQR021the Anhui Provincial Teaching Demonstration Course Project under Grant No.2020SJJXSFK0330+9 种基金the demonstration experiment training center project of Anhui Polytechnic University under Grant No.2020sysx02the Overseas Visiting and Research Project for Outstanding Young Backbone Talents in Universities of Anhui Province under Grant No.gxgwfx2019041the Innovation Project for Returned Overseas Students in Anhui Province under Grant No.2020LCX013Key Research and Development Projects of Anhui Province under Grant No.202004b11020006Scientific Research Foundation of Anhui Polytechnic University under Grant No.2020YQQ010Anhui Polytechnic University Research Initiation Fund for Introducing Talents under Grant No.2019YQQ004Anhui Polytechnic University Research Project under Grant No.Xjky019201905Industrial Collaborative Innovation Fund of Anhui Polytechnic University and Jiujiang District under Grant No.2021cyxtb9Open Project of Anhui Provincial Engineering Laboratory on Information Fusion and Control of Intelligent Robot under Grant No.IFCIR2020001Open project of Key Laboratory of industrial equipment quality big data Ministry of industry and information technology under Grant No.2021-IEQBD-05.
文摘In order to solve the problems of too large mass,too complex structure and poor flexibility of the 6 DOF manipulator,the topological optimization theory based on variable density method is applied to the 6-DOF manipulator,the topology optimization of the main structural components of the manipulator is carried out with the help of the finite element software ANSYS,and the optimized structure is simplified according to the density distribution of the units and the requirements of manufacturability.the results are compared and analysed by static mechanics.It shows that the whole mass of the 6-DOF manipulator is reduced by 47.23%without changing the original mechanical properties after topological optimization,and the optimized model can meet the requirements of manufacturability,the optimization effect is signifcant,which can be used as a reference for the structure optimization of the 6-DOF manipulator.
文摘A fuzzy adaptive control method is proposed for a flexible robot manipulator. Due to the structure characteristics of the flexible manipulator, the vibration modes must be controlled to realize the high-precision tip position. The Lagrangian principle is utilized to model the dynamic function of the single-degree flexible manipulator incorporating the assumed modes method. Simulation results of the fuzzy adaptive control method in the location control and the trajectory tracking with different tip disturbances are presented and compared with the results of the classic PD control. It shows that the controller can obtain the stable and robust performance.
