期刊文献+
共找到1,352篇文章
< 1 2 68 >
每页显示 20 50 100
Large deformation mechanism and“stress relief-support reinforcement”synergetic control method of soft rock roadway in footwall of deep normal fault 被引量:1
1
作者 PEI Hong-xi LIU Xue-sheng +5 位作者 FAN De-yuan TAN Yun-liang LI Xue-bin GAO Yu-dong SHI Zhi-han ZHANG Yu 《Journal of Central South University》 2025年第10期3945-3967,共23页
The surrounding rock of the soft rock roadway is seriously deformed and damaged under the superposition of mining stress and fault tectonic stress.In this paper,taking the No.232206 intake roadway in Meihuajing Coal M... The surrounding rock of the soft rock roadway is seriously deformed and damaged under the superposition of mining stress and fault tectonic stress.In this paper,taking the No.232206 intake roadway in Meihuajing Coal Mine as the engineering background,the deformation and failure law of the surrounding rock of the roadway in different fault protection pillar widths were obtained by numerical simulation method.On this basis,the mechanical model of the roadway under the action of hanging wall overburden migration and fault slip in normal faults was established,and the energy-driven mechanism of large deformation of the surrounding rock of the roadway was revealed.The ratio T of the energy applying on anchoring surrounding rock to the resistant energy of the anchored surrounding rock was defined as the criterion for the deformation of the roadway.Finally,it was calculated according to the actual working conditions on site,and the control method of“stress relief-support reinforcement”was used to support the roadway with the risk of large deformation.The on-site monitoring results show that the control effect of the surrounding rock of the roadway is obvious. 展开更多
关键词 normal fault large deformation mechanism pillar widths ENERGY synergetic control method
在线阅读 下载PDF
Harmonic amplitude-phase adaptive control and its application in three-axis simulators
2
作者 张元生 杨一栋 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2005年第5期572-575,共4页
This paper proposes a compensation method for using the Harmonic Amplitude-Phase Adaptive Control(HAPAC)to increase the precision of sinusoidal motion simulators. It also expounds on the HAPAC principle and structural... This paper proposes a compensation method for using the Harmonic Amplitude-Phase Adaptive Control(HAPAC)to increase the precision of sinusoidal motion simulators. It also expounds on the HAPAC principle and structural disposition, develops the HAPAC control laws and analyzes the system stability in the HAPAC. A method for further improving the precision using online identification of the system’s frequency-response models is presented. The tested data and tracking errors of the simulator demonstrate that the HAPAC makes the sinusoidal motions achieve higher precision than the common classical controls. The HAPAC can also be used in other tracking systems of precision sinusoidal motions. 展开更多
关键词 harmonic amplitude-phase control adaptive control simulator and test table
在线阅读 下载PDF
New Normal Control of Agricultural Non-point Source Pollution in the Dianchi Lake Basin 被引量:10
3
作者 Xia Tiyuan Chen Zebin Jin Song 《Meteorological and Environmental Research》 CAS 2017年第2期63-72,共10页
Based on Kunming statistical yearbook and field survey data of agricultural non-point source pollution in counties or districts in the Dianchi Lake basin,previous and current situation of agricultural production and a... Based on Kunming statistical yearbook and field survey data of agricultural non-point source pollution in counties or districts in the Dianchi Lake basin,previous and current situation of agricultural production and agricultural non-point source pollution control in the Dianchi Lake basin were studied,and countermeasures and suggestions of comprehensive control of agricultural non-point source pollution in the basin were proposed. 展开更多
关键词 The Dianchi LAKE BASIN AGRICULTURAL non-point source POLLUTION NEW normal control Measures China
在线阅读 下载PDF
Selection of suitable internal controls for gene expression normalization in rats with spinal cord injury 被引量:4
4
作者 Wei Liu Jie Yu +2 位作者 Yi-Fan Wang Qian-Qian Shan Ya-Xian Wang 《Neural Regeneration Research》 SCIE CAS CSCD 2022年第6期1387-1392,共6页
There is a lack of systematic research on the expression of internal control genes used for gene expression normalization in real-time reverse transcription polymerase chain reaction in spinal cord injury research.In ... There is a lack of systematic research on the expression of internal control genes used for gene expression normalization in real-time reverse transcription polymerase chain reaction in spinal cord injury research.In this study,we used rat models of spinal cord hemisection to analyze the expression stability of 13 commonly applied reference genes:Actb,Ankrd27,CypA,Gapdh,Hprt1,Mrpl10,Pgk1,Rictor,Rn18s,Tbp,Ubc,Ubxn11,and Ywhaz.Our results show that the expression of Ankrd27,Ubc,and Tbp were stable after spinal cord injury,while Actb was the most unstable internal control gene.Ankrd27,Ubc,Tbp,and Actb were consequently used to investigate the effects of internal control genes with differing stabilities on the normalization of target gene expression.Target gene expression levels and changes over time were similar when Ankrd27,Ubc,and Tbp were used as internal controls but different when Actb was used as an internal control.We recommend that Ankrd27,Ubc,and Tbp are used as internal control genes for real-time reverse transcription polymerase chain reaction in spinal cord injury research.This study was approved by the Administration Committee of Experimental Animals,Jiangsu Province,China(approval No.20180304-008)on March 4,2018. 展开更多
关键词 geNorm analysis reference genes internal control genes normalIZATION NormFinder analysis reverse transcription-quantitative polymerase chain reaction spinal cord injury stability of gene expression
暂未订购
Identification of stable internal control genes for accurate normalization of real-time quantitative PCR data in testicular tissue from two breeds of cattle
5
作者 Pradeep Nag Ankur Sharma +6 位作者 Elango Kamaraj Arumugam Kumaresan Tirtha Kumar Datta Ayyasamy Manimaran Nilendu Paul Sakthivel Jeyakumar Kerekoppa P.Ramesha 《Asian pacific Journal of Reproduction》 2020年第5期247-255,共9页
Objective:To assess the stability of 10 candidate internal control genes(ICGs),namely GAPDH,ACTB,RPL23,RPS15A,ATPSF1,GLUT5,HMBS,ATP2B4,PPIA,and BRP to normalize the transcriptional data from testes samples of Zebu and... Objective:To assess the stability of 10 candidate internal control genes(ICGs),namely GAPDH,ACTB,RPL23,RPS15A,ATPSF1,GLUT5,HMBS,ATP2B4,PPIA,and BRP to normalize the transcriptional data from testes samples of Zebu and crossbred bulls.Methods:Total RNA was isolated from testicular tissue of Zebu and crossbred bulls(n=6 each)between 2-8 years of age.cDNA was synthesized,and the quantitative real-time polymerase chain reaction(PCR)was performed.The cycle threshold values were used for the analysis of the stability of ICGs.Four different statistical algorithms:geNorm,Normfinder,BestKeeper,and RefFinder,were used to assess the stability of these genes.Results:ATPSF1,HMBS,PPIA,and RPS15A were the most reliable and stable ICGs for Zebu testes,and ATPSF1,RPL23,and PPIA for crossbred testes.Conclusions:A panel of stable ICGs(ATPSF1,HMBS,PPIA,RPS15A for Zebu and ATPSF1,RPL23,and PPIA for crossbred)for normalization of gene expression data in testes samples can be helpful for researchers to conduct functional genomics studies at the testicular level in cattle bulls. 展开更多
关键词 Cattle bulls Gene expression Internal control genes normalIZATION qPCR Testis
在线阅读 下载PDF
A REVERSED-FRAME NORMALIZATION DESIGN OF ROBUST FLIGHT CONTROL SYSTEM
6
作者 Jiang Changsheng, Shen Chunlin and Hu ZhonghanNanjing Aeronautical Institute 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 1991年第1期35-45,共11页
In this paper, a discussion is devoted to the theory and method of a reversed-frame normalization design to robust flight control system. The robust stability theory of the normal transfer function matrix with the sam... In this paper, a discussion is devoted to the theory and method of a reversed-frame normalization design to robust flight control system. The robust stability theory of the normal transfer function matrix with the same characteristic gain loci is proved. An example of flight control system design shows the application and advantage of this method. 展开更多
关键词 A REVERSED-FRAME normalIZATION DESIGN OF ROBUST FLIGHT control SYSTEM
在线阅读 下载PDF
Role of Soluble Factors in Immune and Normal Sera in the Control of Giardiasis Due to Giardia Iamblia
7
作者 R.K.SRIVASTAVA N.SETHI +1 位作者 N.GUPTA A.K.AGARWAL 《Biomedical and Environmental Sciences》 SCIE CAS CSCD 1992年第2期87-91,共5页
Hyperimmune sera (HIS), raised against crude giardia antigen, on in vitro interaction, caused more agglutination of Giardia lamblia trophozoites. Heat inactivated HIS possessed a comparable agglutinating activity as t... Hyperimmune sera (HIS), raised against crude giardia antigen, on in vitro interaction, caused more agglutination of Giardia lamblia trophozoites. Heat inactivated HIS possessed a comparable agglutinating activity as the non-inactivated controls. Non-inactivated normal (unimmunized) serum caused immobilization of Giardia trophozoite, which was checked on heat inactivation. Antibodies in immune sera are mainly responsible for agglutination, whereas the heat labile non-immune components control the mobility of the intestinal parasite. 展开更多
关键词 Role of Soluble Factors in Immune and normal Sera in the control of Giardiasis Due to Giardia Iamblia
暂未订购
Bi-normalized response spectra and seismic intensity in Bucharest for 1986 and 1990 Vrancea seismic events
8
作者 Florin Pavel Radu Vacareanu +1 位作者 Cristian Neagu Andrei Pricopie 《Earthquake Engineering and Engineering Vibration》 SCIE EI CSCD 2014年第1期125-135,共11页
The Vrancea subcrustal earthquakes of August 30,1986 and May 30,1990 are the two most recent seismic events that have occurred in Romania with moment magnitudes M W ≥ 6.9.The spectral analysis of the strong ground mo... The Vrancea subcrustal earthquakes of August 30,1986 and May 30,1990 are the two most recent seismic events that have occurred in Romania with moment magnitudes M W ≥ 6.9.The spectral analysis of the strong ground motions recorded in Bucharest reveals that despite small differences in magnitude between the 1986 and 1990 earthquakes,their frequency contents are very different,sometimes even opposing.The main focus of this study is to conduct a comparative analysis of the response spectra in terms of the bi-normalized response spectra(BNRS) proposed by Xu and Xie(2004 and 2007) for strong ground motions recorded in Bucharest during these two seismic events.The mean absolute acceleration and relative velocity response spectra for the two earthquakes are discussed and compared.Furthermore,the mean bi-normalized absolute acceleration and normalized relative velocity response spectra with respect to the control period T C are computed for the ground motions recorded in Bucharest in 1986 and 1990.The predominant period T P is also used in this study for the normalization of the spectral period axis.Subsequently,the methodology proposed by Martinez-Perreira and Bommer(1998) is applied in order to estimate the seismic intensity of the two events.The results are discussed and several conclusions regarding the possibility of using the bi-normalized response spectra(BNRS) are given. 展开更多
关键词 response spectra bi-normalized response spectra dynamic amplifi cation factor control period damage potential parameters
在线阅读 下载PDF
油气弹簧激振试验台归一化幅相控制稳定性研究
9
作者 齐潘国 韩冬 +1 位作者 迟帅 张辉 《兵器装备工程学报》 北大核心 2026年第3期132-139,190,共9页
针对所研制的油气弹簧激振试验台,在常规幅相控制算法基础上,提出归一化幅相控制算法并深入研究其稳定性问题,以解决试验台幅相控制参数配置复杂的问题。建立某油气弹簧激振试验台液压伺服系统开环传递函数模型,设计P控制参数,保证系统... 针对所研制的油气弹簧激振试验台,在常规幅相控制算法基础上,提出归一化幅相控制算法并深入研究其稳定性问题,以解决试验台幅相控制参数配置复杂的问题。建立某油气弹簧激振试验台液压伺服系统开环传递函数模型,设计P控制参数,保证系统具有足够的稳定裕量。对常规幅相控制算法的结构原理进行深入理论分析,发现算法中的步长增益是影响系统稳定性的决定性因素,且步长增益稳定取值范围与输入正弦幅值相关。提出归一化幅相控制算法,给出唯一的且与输入正弦幅值不相关的步长增益的稳定取值范围。建立某油气弹簧激振试验台归一化幅值控制液压位置伺服系统AMESim仿真模型,仿真验证步长增益对稳定性的影响,仿真结果与理论一致,仿真发现当步长增益临近区间边界值时,系统易产生超调现象,导致稳定性降低。把归一化幅相控制算法应用在所研制的油气弹簧激振试验台,试验验证了仿真结果与理论推导的正确性。 展开更多
关键词 油气弹簧 激振试验台 归一化幅相控制 稳定性 AMESIM
在线阅读 下载PDF
监控过程变异系数双侧自适应EWMA控制图的优化设计
10
作者 贡平邺 郭宝才 《控制与决策》 北大核心 2026年第3期692-706,共15页
传统控制图常常假定受控过程均值和方差恒定.然而,在实际生产或研究场景中,这一假设往往难以成立.如病人体内血液化学成分的含量会随着时间的推移而发生变化,当其均值和方差随时间漂移时,漂移方向和大小常常未知.面对这样的复杂情况,传... 传统控制图常常假定受控过程均值和方差恒定.然而,在实际生产或研究场景中,这一假设往往难以成立.如病人体内血液化学成分的含量会随着时间的推移而发生变化,当其均值和方差随时间漂移时,漂移方向和大小常常未知.面对这样的复杂情况,传统控制图由于自身的局限性,无法对实际过程实施有效监控.鉴于此,提出一种改进方案:首先,对变异系数平方进行对数正态变换;然后,设计双侧自适应EWMA(AEWMA)控制图监控变异系数;接着,讨论参数对所提出控制图的影响,并与已有控制图的失控性能进行比较.比较结果显示,所提出的控制图仅优于部分已有控制图.为提升过程检测能力,将变样本容量(VSS)融入控制图设计,提出VSS AEWMA控制图.与已有控制图的比较结果表明,所提出VSS AEWMA控制图在监控变异系数时综合性能最优,能够有效识别过程异常. 展开更多
关键词 统计过程控制 对数正态变换 变异系数 变样本容量 自适应EWMA 优化设计
原文传递
基于Normal Form方法的UPFC多个功能控制器间交互影响分析 被引量:3
11
作者 邹振宇 江全元 +1 位作者 曹一家 王海风 《现代电力》 2005年第5期1-6,共6页
统一潮流控制器(UPFC)的重要特点之一就是它具有的多控制功能,包括潮流控制、电压控制和稳定性控制等等。然而时域仿真研究表明统一潮流控制器的多个控制器之间可能存在着较强的交互影响。本文研究了规范型(Normal Form)方法用于分析UPF... 统一潮流控制器(UPFC)的重要特点之一就是它具有的多控制功能,包括潮流控制、电压控制和稳定性控制等等。然而时域仿真研究表明统一潮流控制器的多个控制器之间可能存在着较强的交互影响。本文研究了规范型(Normal Form)方法用于分析UPFC控制器间的交互影响问题的可能性,并引入一非线性交互指标定量地指示出控制器间的交互强弱程度。所提方法应用到新英格兰10机39节点系统,并通过时域仿真验证了所提规范型理论分析方法的有效性。 展开更多
关键词 统一潮流控制器 多控制通道 交互影响 规范型 非线性交互指标
原文传递
基于Normal Form方法的电机系统分岔控制 被引量:1
12
作者 袁惠群 张中华 《振动.测试与诊断》 EI CSCD 北大核心 2014年第6期1084-1087,1171,共4页
研究了无刷直流电机系统等效非线性数学模型,分析了系统的Hopf分岔行为,并设计了washout滤波器,对系统产生的分岔行为进行控制。引入直接Normal Form(规范型)计算方法,求出系统的Hopf分岔规范式。通过规范式系数讨论控制参数的选择原则... 研究了无刷直流电机系统等效非线性数学模型,分析了系统的Hopf分岔行为,并设计了washout滤波器,对系统产生的分岔行为进行控制。引入直接Normal Form(规范型)计算方法,求出系统的Hopf分岔规范式。通过规范式系数讨论控制参数的选择原则以及对Hopf分岔类型及极限环幅值的影响。理论和仿真结果表明:在施加控制器之前,系统发生亚临界Hopf分岔,极限环不稳定,系统进入混沌状态;在施加控制器之后,当受控系统规范式系数实部小于零时,系统发生超临界Hopf分岔,原系统不稳定极限环被控制为稳定极限环,从而抑制了混沌的产生,保证了电机运行性能的稳定性。 展开更多
关键词 无刷直流电机 HOPF分岔 washout滤波器 规范型 分岔控制
在线阅读 下载PDF
基于NMI-GBR-SHAP的甲醇制烯烃催化剂积炭过程解释性分析
13
作者 李文亮 张浩 +2 位作者 陈鸣睿 梁晨 翟持 《化工学报》 北大核心 2026年第2期791-802,共12页
甲醇制烯烃(methanol to olefins,MTO)工艺中催化剂积炭过程关联因素多且存在复杂交互作用,难以有效调控积炭量。本研究构建基于归一化互信息(NMI)、梯度提升回归(GBR)与SHAP的集成分析框架对催化剂积炭的主要影响因素进行解释性研究,... 甲醇制烯烃(methanol to olefins,MTO)工艺中催化剂积炭过程关联因素多且存在复杂交互作用,难以有效调控积炭量。本研究构建基于归一化互信息(NMI)、梯度提升回归(GBR)与SHAP的集成分析框架对催化剂积炭的主要影响因素进行解释性研究,发现当再生一旋入口线速维持在16.0~18.5 m/s,同时配合9~11 t/h的反应器保护蒸汽,将再生器烧焦总风量控制在26000~30000 m^(3)/h且再生滑阀阀位保持在34%~36%,并且蒸汽配入率不低于34%时,能够对催化剂的积炭情况进行有效调控(6.5%~7.3%)。基于上述工艺指标构建基准限,一旦运行工况超出该监测限,通过对交互特征进行SHAP分析,能够对相应的积炭趋势(变化率)作出解释,为工艺过程的平稳运行提供必要的监测信息,为MTO过程催化剂积炭监测提供兼具预测精度和机理解释性的技术方案。 展开更多
关键词 甲醇制烯烃 催化剂积炭 归一化互信息 梯度提升回归 可解释机器学习 过程控制 预测 化学过程
在线阅读 下载PDF
基于两点应变测量对变截面弹性杆的正向波抵消研究
14
作者 吕超勇 于涛 +1 位作者 侯文朝 赵翼飞 《机械工程师》 2026年第3期43-46,共4页
为了减少力波扰动造成的危害,采用两点应变法测量对变截面弹性杆中的正向波进行分离,并设计一种前馈控制系统对正向波进行抵消。由于弥散效应的影响,各谐波分量按各自的相速传播,导致波形发生变化,从而无法直接对变截面弹性杆中的力波... 为了减少力波扰动造成的危害,采用两点应变法测量对变截面弹性杆中的正向波进行分离,并设计一种前馈控制系统对正向波进行抵消。由于弥散效应的影响,各谐波分量按各自的相速传播,导致波形发生变化,从而无法直接对变截面弹性杆中的力波直接正向分离,因此需要对测量方法进行改进,再将各谐波分离,该方法基于变截面杆的传播方程,对不同频率分量采用不同的传递方程,从而预测至下游的正向扰动,并设计一种理想的前馈控制系统以抵消正向波。通过有限元仿真模拟将计算数据代入前馈系统,结果表明可以达到理想消振效果。 展开更多
关键词 变截面 弥散效应 前馈控制 法向力
在线阅读 下载PDF
车辆悬置与悬架复合隔振系统协同控制策略
15
作者 王淋 赵俊生 +4 位作者 陈雪丽 支佳丽 王淞 张文元 张荣涛 《机械设计与制造工程》 2026年第4期23-29,共7页
为提升车辆平顺性与NVH性能,针对悬置与悬架复合隔振系统,提出了一种融合前馈PID与LQR的主动控制算法,并采用NCC算法进行在线时滞分析,以对控制器进行时滞补偿,提高系统的控制精度。ADAMS与MATLAB联合仿真实验表明,采用该主动控制策略... 为提升车辆平顺性与NVH性能,针对悬置与悬架复合隔振系统,提出了一种融合前馈PID与LQR的主动控制算法,并采用NCC算法进行在线时滞分析,以对控制器进行时滞补偿,提高系统的控制精度。ADAMS与MATLAB联合仿真实验表明,采用该主动控制策略的复合隔振系统相比于传统被动隔振系统,发动机与车身的质心振动加速度均方根分别降低45.82%和8.08%,位移均方根分别降低32.50%和22.24%。该研究可为车辆悬置与悬架的复合隔振系统的主动控制设计提供理论与仿真依据。 展开更多
关键词 车辆发动机 主动悬置 前馈PID LQR控制器 时滞特性 归一化互相关
在线阅读 下载PDF
基于TDLAS的氨痕量气体传感器设计
16
作者 李延玲 游源 +2 位作者 钱枫 邓明星 崔蕊 《电子设计工程》 2026年第6期96-102,108,共8页
现有的氨痕量气体传感器在检测精度、灵敏度、工作稳定性和微型化方面仍有很大提升空间,文中应用TDLAS-WMS原理开发出一种氨痕量气体传感器。为提升传感器检测性能,设计了增量式PID算法实现激光器的恒温控制,以确保激光波长的精确调谐... 现有的氨痕量气体传感器在检测精度、灵敏度、工作稳定性和微型化方面仍有很大提升空间,文中应用TDLAS-WMS原理开发出一种氨痕量气体传感器。为提升传感器检测性能,设计了增量式PID算法实现激光器的恒温控制,以确保激光波长的精确调谐。此外,将鹈鹕优化算法(POA)和变分模态分解(VMD)进行融合用于数字滤波,与硬件滤波电路共同作用,以降低信号噪声。通过配置不同浓度的氨气进行谐波检测,并对得到的二次谐波进行光强归一化,以消除光强变化对检测精度的影响,最后采用分段拟合标定法进行浓度标定。实验结果表明,该传感器的检测灵敏度为3.73×10-3,测量最大误差仅为2.21%,可以满足氨痕量气体的实时监测需求。 展开更多
关键词 激光吸收光谱技术 激光器温度控制 数字滤波 光强归一化
在线阅读 下载PDF
基于改进超螺旋滑模观测器的PMSM无感控制
17
作者 马志胜 谭家万 严浪涛 《组合机床与自动化加工技术》 北大核心 2026年第3期133-138,共6页
针对传统滑模观测器在估计转子速度及位置过程中存在高频抖振、超调量大、误差较大等问题,提出一种增益自适应的改进超螺旋滑模观测器。首先,使用模糊控制对超螺旋滑模观测器增益系数进行实时调整;其次,以定子电流和扩展反电动势为观测... 针对传统滑模观测器在估计转子速度及位置过程中存在高频抖振、超调量大、误差较大等问题,提出一种增益自适应的改进超螺旋滑模观测器。首先,使用模糊控制对超螺旋滑模观测器增益系数进行实时调整;其次,以定子电流和扩展反电动势为观测对象构建改进观测器,并采用连续饱和函数代替符号函数;然后,使用归一化锁相环取代反正切函数进一步提高观测精度;最后,设计了基于改进趋近律的控制器替换PI控制器。为验证可行性,搭建MATLAB/Simulink仿真模型,仿真结果表明采用设计改进的超螺旋滑模观测器可以显著降低高频抖振,转速误差降低了80%,转子位置误差降低了30%。 展开更多
关键词 永磁同步电机 超螺旋滑模观测器 模糊控制 趋近律 归一化锁相环
在线阅读 下载PDF
日常检测结果应用于实验室质量管理的探析
18
作者 宋飞 黄平 +4 位作者 史高兴 管嵩 万敏 岳振艺 冯丽丽 《云南化工》 2026年第3期83-86,共4页
通过日常检测结果的积累统计,进行实验室质量管理评价。以铁矿石中全铁含量的检测为例,通过累积的日常样品检测结果计算测量精密度,用于评价检测人员持续能力。以质控样检测结果计算期间精密度,验证整个检测过程的独立性和正态性,确保... 通过日常检测结果的积累统计,进行实验室质量管理评价。以铁矿石中全铁含量的检测为例,通过累积的日常样品检测结果计算测量精密度,用于评价检测人员持续能力。以质控样检测结果计算期间精密度,验证整个检测过程的独立性和正态性,确保测量过程处于统计控制状态。 展开更多
关键词 质量管理 日常检测 质控样 期间精密度 独立性和正态性
暂未订购
基于空三加密精度的数字航空摄影像控点布设跨度阈值研究
19
作者 姚娜 苏鹏浩 +3 位作者 李德重 王燕平 薛永军 丛小欧 《测绘通报》 北大核心 2026年第2期131-136,共6页
像控点稀少化布设是提升大比例尺数字航空摄影经济性的关键环节。本文面向内蒙古自治区自然资源调查监测体系建设制作1∶2000高精度实景三维监测底板建设需求,设计11组航向基线跨度与旁向航线跨度组合对照试验,定量验证跨度对空三加密... 像控点稀少化布设是提升大比例尺数字航空摄影经济性的关键环节。本文面向内蒙古自治区自然资源调查监测体系建设制作1∶2000高精度实景三维监测底板建设需求,设计11组航向基线跨度与旁向航线跨度组合对照试验,定量验证跨度对空三加密精度的影响。结果表明:定向点误差受跨度影响甚微;检查点精度随跨度增大而降低,平面精度对航向跨度更敏感,高程精度受旁向跨度影响更显著。据此提出平地地形下兼顾精度与效率的像控点布设跨度阈值,为数字航摄提供精度与经济性平衡的工程决策依据。 展开更多
关键词 像控点 空三加密 航向基线跨度 旁向航线跨度 归一化误差升幅 稀少化
原文传递
用Normal Form直接法研究壁板的热颤振与控制 被引量:2
20
作者 赵秀芳 曹树谦 《振动与冲击》 EI CSCD 北大核心 2012年第11期54-56,共3页
建立了二维受热壁板在超音速气流中的颤振方程。运用分岔理论求得了系统的Hopf分岔点,应用Nor-mal Form直接法计算得到系统Hopf分岔Normal Form系数。引入wash-out滤波器技术对壁板热颤振进行了主动控制,延迟系统Hopf分岔的产生而不改... 建立了二维受热壁板在超音速气流中的颤振方程。运用分岔理论求得了系统的Hopf分岔点,应用Nor-mal Form直接法计算得到系统Hopf分岔Normal Form系数。引入wash-out滤波器技术对壁板热颤振进行了主动控制,延迟系统Hopf分岔的产生而不改变分岔类型。最后采用数值模拟验证了理论分析。 展开更多
关键词 热颤振 HOPF分岔 normal Form直接法 控制
在线阅读 下载PDF
上一页 1 2 68 下一页 到第
使用帮助 返回顶部