The accuracy of spot centroid positioning has a significant impact on the tracking accuracy of the system and the stability of the laser link construction.In satellite laser communication systems,the use of short-wave...The accuracy of spot centroid positioning has a significant impact on the tracking accuracy of the system and the stability of the laser link construction.In satellite laser communication systems,the use of short-wave infrared wavelengths as beacon light can reduce atmospheric absorption and signal attenuation.However,there are strong non-uniformity and blind pixels in the short-wave infrared image,which makes the image distorted and leads to the decrease of spot centroid positioning accuracy.Therefore,the high-precision localization of the spot centroid of the short-wave infrared images is of great research significance.A high-precision spot centroid positioning model for short-wave infrared is proposed to correct for non-uniformity and blind pixels in short-wave infrared images and quantify the localization errors caused by the two,further model-based localization error simulations are performed,and a novel spot centroid positioning payload for satellite laser communications has been designed using the latest 640×512 planar array InGaAs shortwave infrared detector.The experimental results show that the non-uniformity of the corrected image is reduced from 7%to 0.6%,the blind pixels rejection rate reaches 100%,the frame rate can be up to 2000 Hz,and the spot centroid localization accuracy is as high as 0.1 pixel point,which realizes high-precision spot centroid localization of high-frame-frequency short-wave infrared images.展开更多
Physics-informed neural networks(PINNs)have shown remarkable prospects in solving the forward and inverse problems involving partial differential equations(PDEs).The method embeds PDEs into the neural network by calcu...Physics-informed neural networks(PINNs)have shown remarkable prospects in solving the forward and inverse problems involving partial differential equations(PDEs).The method embeds PDEs into the neural network by calculating the PDE loss at a set of collocation points,providing advantages such as meshfree and more convenient adaptive sampling.However,when solving PDEs using nonuniform collocation points,PINNs still face challenge regarding inefficient convergence of PDE residuals or even failure.In this work,we first analyze the ill-conditioning of the PDE loss in PINNs under nonuniform collocation points.To address the issue,we define volume weighting residual and propose volume weighting physics-informed neural networks(VW-PINNs).Through weighting the PDE residuals by the volume that the collocation points occupy within the computational domain,we embed explicitly the distribution characteristics of collocation points in the loss evaluation.The fast and sufficient convergence of the PDE residuals for the problems involving nonuniform collocation points is guaranteed.Considering the meshfree characteristics of VW-PINNs,we also develop a volume approximation algorithm based on kernel density estimation to calculate the volume of the collocation points.We validate the universality of VW-PINNs by solving the forward problems involving flow over a circular cylinder and flow over the NACA0012 airfoil under different inflow conditions,where conventional PINNs fail.By solving the Burgers’equation,we verify that VW-PINNs can enhance the efficiency of existing the adaptive sampling method in solving the forward problem by three times,and can reduce the relative L 2 error of conventional PINNs in solving the inverse problem by more than one order of magnitude.展开更多
To accurately reconstruct the tomographic gamma scanning(TGS)transmission measurement image,this study optimized the transmission reconstruction equation based on the actual situation of TGS transmission measurement.U...To accurately reconstruct the tomographic gamma scanning(TGS)transmission measurement image,this study optimized the transmission reconstruction equation based on the actual situation of TGS transmission measurement.Using the transmission reconstruction equation and the Monte Carlo program Geant4,an innovative virtual trajectory length model was constructed.This model integrated the solving process for the trajectory length and detection efficiency within the same model.To mitigate the influence of the angular distribution ofγ-rays emitted by the transmitted source at the detector,the transport processes of numerous particles traversing a virtual nuclear waste barrel with a density of zero were simulated.Consequently,a certain amount of information was captured at each step of particle transport.Simultaneously,the model addressed the nonuniform detection efficiency of the detector end face by considering whether the energy deposition of particles in the detector equaled their initial energy.Two models were established to validate the accuracy and reliability of the virtual trajectory length model.Model 1 was a simplified nuclear waste barrel,whereas Model 2 closely resembled the actual structure of a nuclear waste barrel.The results indicated that the proposed virtual trajectory length model significantly enhanced the precision of the trajectory length determination,substantially increasing the quality of the reconstructed images.For example,the reconstructed images of Model 2 using the“point-to-point”and average trajectory models revealed a signalto-noise ratio increase of 375.0%and 112.7%,respectively.Thus,the virtual trajectory length model proposed in this study holds paramount significance for the precise reconstruction of transmission images.Moreover,it can provide support for the accurate detection of radioactive activity in nuclear waste barrels.展开更多
This paper presents a method for obtaining the displacement of sand particles in a sand–bentonite mixture(SBM)when saturated with water,based on particle tracking velocimetry(PTV).The raw photographs were first conve...This paper presents a method for obtaining the displacement of sand particles in a sand–bentonite mixture(SBM)when saturated with water,based on particle tracking velocimetry(PTV).The raw photographs were first converted into binary images.The sand particles were then detected,and the displacement of the sand particles was obtained by comparing their positions in adjacent images.The swelling strain induced by saturation was also obtained using the proposed PTV method.This method was validated by comparing the result with those obtained using a displacement transducer.Subsequently,a comparative analysis of sand particle displacements was conducted for specimens with varying bentonite content(BC),initial thickness,and water infiltration directions.The experimental results obtained were as follows:(1)For specimens with different BCs,local swelling displacement of sand particles at the top part of the specimen increased with higher BCs;(2)For specimens with various heights(hsp),larger local swelling displacement was generated at lower hsp at the initial state;(3)Local swelling characteristics differed in different water infiltration directions.Top-side infiltration showed a significant downward movement of particles during the first several hours of swelling.An estimation method for the dry density distribution of the specimen was proposed based on PTV data and then verified by slicing dry density and water content measurement results.展开更多
A central problem in the study of complexity is the measure of nonuniform complexity classes. BPPP/poly has been proved by Aldman, and EXPSPACEP/poly by Kannan. We propose the definition of approximate acceptance with...A central problem in the study of complexity is the measure of nonuniform complexity classes. BPPP/poly has been proved by Aldman, and EXPSPACEP/poly by Kannan. We propose the definition of approximate acceptance with which we discuss the nonuniform complexity of the K sized complete subgraph problem. The method of modal theory is used and the K sized complete subgraph problemP/poly, co NPP/poly and NPP/poly is proved. This paper solves the Karp Lipton′s open problem: “NPP/poly?”展开更多
With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） meth...With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） method. The reflection of the ABC caused by both the truncated error and the phase velocity error is analyzed. Based on the phase velocity estimation and the nonuniform cell, two methods are studied and then adopted to improve the performance of the ABC. A calculation case of a rectangular waveguide which is a typical dispersive transmission line is carried out using the ADI-FDTD method with the improved ABC for evaluation. According to the calculated case, the comparison is given between the reflection coefficients of the ABC with and without the velocity estimation and also the comparison between the reflection coefficients of the ABC with and without the nonuniform processing. The reflection variation of the ABC under different time steps is also analyzed and the acceptable worsening will not obscure the improvement on the absorption. Numerical results obviously show that efficient improvement on the absorbing performance of the ABC is achieved based on these methods for the ADI-FDTD.展开更多
A major motivation for this work is to investigate a method of computer simulation for compensating fixed pattern noise of the infrared focal plane arrays. A mathematical model of the output signal of focal plane arra...A major motivation for this work is to investigate a method of computer simulation for compensating fixed pattern noise of the infrared focal plane arrays. A mathematical model of the output signal of focal plane array was established; a compensating algorithm utilizing reference source was derived and simulating programs were designed. The images of compensating process verify the influence of nonuniformity of responsibility and offset on fixed pattern noise. The result show that simulating method of investigating compensation technology for focal plane arrays is feasible, the generated images and methods can be used to the study of image recognition.展开更多
The deformation characteristics of tailor rolled blank （TRB） in the course of uniaxial tension were studied by means of analysis, test and simulation. The mechanical analytical model of TRB during uniaxial tension w...The deformation characteristics of tailor rolled blank （TRB） in the course of uniaxial tension were studied by means of analysis, test and simulation. The mechanical analytical model of TRB during uniaxial tension was set up, and the deformation formulae for the thinner side and for the thicker side were derived to quantify the deformation of TRB. On this basis, uniaxial tension tests on TRB and ordinary blanks （the thinner side and the thicker side of TRB） were conducted. Lagrange polynomial interpolation method was adopted to construct the stress-strain fields of unannealed and annealed TRBs for solving TRB material parameters, and then, uniaxial tension simulation on TRB was completed. Deformations and properties of unannealed TRB were compared with those of annealed TRB, and the thinner side and the thicker side were also compared. Finally, the research results were explained by metallurgical structure. The results show that nonuniform deformation happens in TRB during uniaxial tension, and the necking occurs on the thinner side. The agreement of analysis, test and simulation confirms the correctness of the analytical model and the deformation formulae. The findings of this paper can lay the foundation for the future study on TRB stamping formability and provide a way for TRB modeling.展开更多
Based on ensemble experiments with three atmospheric general circulation models(AGCMs), this study investigates the role of the Atlantic Multidecadal Oscillation(AMO) in shaping the summer nonuniform warming over the ...Based on ensemble experiments with three atmospheric general circulation models(AGCMs), this study investigates the role of the Atlantic Multidecadal Oscillation(AMO) in shaping the summer nonuniform warming over the Eurasian continent since the mid-1990 s. The results validate that the positive-phase AMO can indeed cause nonuniform warming,with predominant amplified warming over Europe–West Asia and Northeast Asia, but with much weaker warming over Central Asia. The underlying mechanism is then diagnosed from the perspective that the boundary forcing modulates the intrinsic atmospheric variability. The results highlight the role of the Silk Road Pattern(SRP), an intrinsic teleconnection pattern across the subtropical Eurasian continent propagating along the Asian jet. The SRP can not only be identified from the AGCM control experiments with the climatological sea surface temperature(SST), but can also be simulated by the AMO-related SST anomaly(SSTA) forcing. Furthermore, diagnostic linear baroclinic model experiments are conducted, and the results suggest that the SRP can be triggered by the AMO-related tropical diabatic heating. The AMO-triggered SRP-like responses feature anticyclonic circulations over Europe–West Asia and Northeast Asia, but cyclonic circulation over Central Asia. These responses cause increased warm advection towards Europe–West Asia and Northeast Asia, reduced precipitation and cloud cover, and then increased downward shortwave radiation. This increased warm advection and increased downward shortwave radiation together cause amplified warming in Europe–West Asia and Northeast Asia. The situation is opposite for Central Asia.展开更多
Dambreak-induced bed scouring may undermine the foundation of bridge piers and other structures,and that destruction can pose a serious threat.Consequently,this paper aims at exploring the mechanisms of scouring and a...Dambreak-induced bed scouring may undermine the foundation of bridge piers and other structures,and that destruction can pose a serious threat.Consequently,this paper aims at exploring the mechanisms of scouring and armoring.Firstly,the incipient velocity for nonuniform sediment particles was studied,and a formula was derived based on the angle of repose of nonuniform sediment.The results showed that the mechanism of incipient motion for sand and fine gravel differed from that for coarse gravel and cobbles.Also,comparison between experimental and field data shows that the results from the proposed formula agree well with those observed for all conditions.Secondly,a birth-death,immigration-emigration Markov process was developed to describe the bed load transport rate associated with scouring and armoring.The comparison between experimental data and computed results shows that our model can predict the bed load transport rate,although there may be some limitations,the chief of which is that there are many variables in the model to be determined through experiment.This makes its application in river engineering inconvenient.展开更多
Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increas...Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.展开更多
The surface undulating shapes of rock joints have been described qualitatively or experimental quantitatively for a long time. The non determined describing method can not fit quantitative evaluation of mechani...The surface undulating shapes of rock joints have been described qualitatively or experimental quantitatively for a long time. The non determined describing method can not fit quantitative evaluation of mechanical parameters of rock joints in engineering. In this paper, relative amplitude ( R A) is chosen as a quantitative describing index of surface measurement of 1 023 surface undulating curves which conducted by profile curve device(PCD). We discuss the nonuniformity,anisotropy and unhomogeneity of surface undulating shapes of joints. A new method that analyzes the complexity of surface undulating shapes of rock joints directional statistically in various rock joints is also put forward.展开更多
Applicable in fluid dynamics and plasmas, a generalized variable-coefficient Korteweg-de Vries （vcKdV） model is investigated. The bilinear form and analytic N-soliton-like solution for such a model are derived by th...Applicable in fluid dynamics and plasmas, a generalized variable-coefficient Korteweg-de Vries （vcKdV） model is investigated. The bilinear form and analytic N-soliton-like solution for such a model are derived by the Hirota method and Wronskian technique. Additionally, the bilinear auto-Bǎcklund transformation between （N-1）- soliton-like and N-soliton-like solutions is verified.展开更多
The present climate simulations of the mixed layer depth（MLD） and the subduction rate in the subtropical Northeast Pacific are investigated based on nine of the CMIP5 models. Compared with the observation data,spati...The present climate simulations of the mixed layer depth（MLD） and the subduction rate in the subtropical Northeast Pacific are investigated based on nine of the CMIP5 models. Compared with the observation data,spatial patterns of the MLD and the subduction rate are well simulated in these models. The spatial pattern of the MLD is nonuniform, with a local maximum MLD（〉140 m） region centered at（28°N, 135°W） in late winter. The nonuniform MLD pattern causes a strong MLD front on the south of the MLD maximum region, controls the lateral induction rate pattern, and then decides the nonuniform distribution of the subduction rate. Due to the inter-regional difference of the MLD, we divide this area into two regions. The relatively uniform Ekman pumping has little effect on the nonuniform subduction spatial pattern, though it is nearly equal to the lateral induction in values. In the south region, the northward warm Ekman advection（–1.75×10–7 K/s） controls the ocean horizontal temperature advection（–0.85×10–7 K/s）, and prevents the deepening of the MLD. In the ensemble mean, the contribution of the ocean advection to the MLD is about –29.0 m/month, offsetting the sea surface net heat flux contribution（33.9 m/month）. While in the north region, the southward cold advection deepens the MLD（21.4 m/month） as similar as the heat flux（30.4 m/month）. In conclusion, the nonuniform MLD pattern is dominated by the nonuniform ocean horizontal temperature advection. This new finding indicates that the upper ocean current play an important role in the variability of the winter MLD and the subduction rate.展开更多
Knowledge of the equilibrium bed-concentration is vital to mathematic a l modeling of the river-bed deformation associated with suspended load but prev i ous investigations only dealt with the reference concentration ...Knowledge of the equilibrium bed-concentration is vital to mathematic a l modeling of the river-bed deformation associated with suspended load but prev i ous investigations only dealt with the reference concentration of uniform sedime nt because of difficulties in observation of the bed-concentration. This work i s a first attempt to develop a theoretical formula for the equilibrium bed-conce n tration of any fraction of nonuniform sediment defined at the bed-surface. The f ormula is based on a stochastic-mechanistic model for the exchange of nonunifor m sediment near the bed, and described as a function of incipient motion probabil ity, non-ceasing probability, pick-up probability, and the ratio of the averag e single-step continuous motion time to static time. Comparison of bed-concentra ti on calculated from the proposed formula with the measured data showed satisfacto ry agreement, indicating the present formula can be used for solving the differe ntial equation governing the motion of suspended load.展开更多
Sampling is a bridge between continuous-time and discrete-time signals,which is import-ant to digital signal processing.The fractional Fourier transform(FrFT)that serves as a generaliz-ation of the FT can characterize...Sampling is a bridge between continuous-time and discrete-time signals,which is import-ant to digital signal processing.The fractional Fourier transform(FrFT)that serves as a generaliz-ation of the FT can characterize signals in multiple fractional Fourier domains,and therefore can provide new perspectives for signal sampling and reconstruction.In this paper,we review recent de-velopments of the sampling theorem associated with the FrFT,including signal reconstruction and fractional spectral analysis of uniform sampling,nonuniform samplings due to various factors,and sub-Nyquist sampling,where bandlimited signals in the fractional Fourier domain are mainly taken into consideration.Moreover,we provide several future research topics of the sampling theorem as-sociated with the FrFT.展开更多
In a large-scale wireless sensor network(WSN),densely distributed sensor nodes process a large amount of data.The aggregation of data in a network can consume a great amount of energy.To balance and reduce the energy ...In a large-scale wireless sensor network(WSN),densely distributed sensor nodes process a large amount of data.The aggregation of data in a network can consume a great amount of energy.To balance and reduce the energy consumption of nodes in a WSN and extend the network life,this paper proposes a nonuniform clustering routing algorithm based on the improved K-means algorithm.The algorithm uses a clustering method to form and optimize clusters,and it selects appropriate cluster heads to balance network energy consumption and extend the life cycle of the WSN.To ensure that the cluster head(CH)selection in the network is fair and that the location of the selected CH is not concentrated within a certain range,we chose the appropriate CH competition radius.Simulation results show that,compared with LEACH,LEACH-C,and the DEEC clustering algorithm,this algorithm can effectively balance the energy consumption of the CH and extend the network life.展开更多
In this work, the image reconstruction in π-scheme short-scan single-photon emission computed tomography （SPECT） with nonuniform attenuation is derived in its most general form when π-scheme short-scan SPECT entai...In this work, the image reconstruction in π-scheme short-scan single-photon emission computed tomography （SPECT） with nonuniform attenuation is derived in its most general form when π-scheme short-scan SPECT entails data acquisition over disjoint angular intervals without conjugate views totaling to π radians. The reconstruction results are based on decomposition of Novikov＇s inversion operator into three parts bounded in the L2 sense. The first part involves the measured partial data; the second part is a skew-symmetric operator; the third part is a symmetric and compact contribution. It is showed firstly that the operators involved belong to L（L^2（B）. Furthermore numerical simulations are conducted to demonstrate the effectiveness of the developed method.展开更多
A novel Ga N-based vertical heterostructure field effect transistor（HFET） with nonuniform doping superjunctions（non-SJ HFET） is proposed and studied by Silvaco-ATLAS,for minimizing the specific on-resistance（RonA...A novel Ga N-based vertical heterostructure field effect transistor（HFET） with nonuniform doping superjunctions（non-SJ HFET） is proposed and studied by Silvaco-ATLAS,for minimizing the specific on-resistance（RonA） at no expense of breakdown voltage（BV）.The feature of non-SJ HFET lies in the nonuniform doping concentration from top to bottom in the n-and p-pillars,which is different from that of the conventional Ga N-based vertical HFET with uniform doping superjunctions（un-SJ HFET）.A physically intrinsic mechanism for the nonuniform doping superjunction（non-SJ） to further reduce RonA at no expense of BV is investigated and revealed in detail.The design,related to the structure parameters of non-SJ,is optimized to minimize the RonA on the basis of the same BV as that of un-SJ HFET.Optimized simulation results show that the reduction in RonA depends on the doping concentrations and thickness values of the light and heavy doping parts in non-SJ.The maximum reduction of more than 51% in RonA could be achieved with a BV of 1890 V.These results could demonstrate the superiority of non-SJ HFET in minimizing RonA and provide a useful reference for further developing the Ga N-based vertical HFETs.展开更多
Pairwise thermal entanglement in a three-qubit Heisenberg XX model is investigated when a nonuniform mag- netic field and the Dzyaloshinski-Moriya interaction are included. We find that the nonuniform magnetic field a...Pairwise thermal entanglement in a three-qubit Heisenberg XX model is investigated when a nonuniform mag- netic field and the Dzyaloshinski-Moriya interaction are included. We find that the nonuniform magnetic field and Dzyaloshinski-Moriya interaction are the more efficient control parameters for the increase of entanglement and critical temperature. For both the nearest neighbour sites and the next nearest neighbour sites, the magnetic field can induce entanglement to a certain extent and the Dzyaloshinski-Moriya interaction can enhance the entanglement to a stable value. The steady value of the nearest neighbour site entanglement C12 is larger than the next nearest neighbour site entanglement C13. An interesting phenomenon is that the entanglement curve of C12 appears a peak value when the Dzyaloshinski-Moriya interaction is considered in a nonuniform magnetic field.展开更多
基金Supported by the Short-wave Infrared Camera Systems(B025F40622024)。
文摘The accuracy of spot centroid positioning has a significant impact on the tracking accuracy of the system and the stability of the laser link construction.In satellite laser communication systems,the use of short-wave infrared wavelengths as beacon light can reduce atmospheric absorption and signal attenuation.However,there are strong non-uniformity and blind pixels in the short-wave infrared image,which makes the image distorted and leads to the decrease of spot centroid positioning accuracy.Therefore,the high-precision localization of the spot centroid of the short-wave infrared images is of great research significance.A high-precision spot centroid positioning model for short-wave infrared is proposed to correct for non-uniformity and blind pixels in short-wave infrared images and quantify the localization errors caused by the two,further model-based localization error simulations are performed,and a novel spot centroid positioning payload for satellite laser communications has been designed using the latest 640×512 planar array InGaAs shortwave infrared detector.The experimental results show that the non-uniformity of the corrected image is reduced from 7%to 0.6%,the blind pixels rejection rate reaches 100%,the frame rate can be up to 2000 Hz,and the spot centroid localization accuracy is as high as 0.1 pixel point,which realizes high-precision spot centroid localization of high-frame-frequency short-wave infrared images.
基金supported by the National Natural Science Foundation of China(Grant No.92152301)the National Key Research and Development Program of China(Grant No.2022YFB4300200)the Shaanxi Provincial Key Research and Development Program(Grant No.2023-ZDLGY-27).
文摘Physics-informed neural networks(PINNs)have shown remarkable prospects in solving the forward and inverse problems involving partial differential equations(PDEs).The method embeds PDEs into the neural network by calculating the PDE loss at a set of collocation points,providing advantages such as meshfree and more convenient adaptive sampling.However,when solving PDEs using nonuniform collocation points,PINNs still face challenge regarding inefficient convergence of PDE residuals or even failure.In this work,we first analyze the ill-conditioning of the PDE loss in PINNs under nonuniform collocation points.To address the issue,we define volume weighting residual and propose volume weighting physics-informed neural networks(VW-PINNs).Through weighting the PDE residuals by the volume that the collocation points occupy within the computational domain,we embed explicitly the distribution characteristics of collocation points in the loss evaluation.The fast and sufficient convergence of the PDE residuals for the problems involving nonuniform collocation points is guaranteed.Considering the meshfree characteristics of VW-PINNs,we also develop a volume approximation algorithm based on kernel density estimation to calculate the volume of the collocation points.We validate the universality of VW-PINNs by solving the forward problems involving flow over a circular cylinder and flow over the NACA0012 airfoil under different inflow conditions,where conventional PINNs fail.By solving the Burgers’equation,we verify that VW-PINNs can enhance the efficiency of existing the adaptive sampling method in solving the forward problem by three times,and can reduce the relative L 2 error of conventional PINNs in solving the inverse problem by more than one order of magnitude.
基金supported by The Youth Science Foundation of Sichuan Province(Nos.2022NSFSC1230,2022NSFSC1231,and 23NSFSC5321)the Science and Technology Innovation Seedling Project of Sichuan Province(No.MZGC20230080)+2 种基金the General project of national Natural Science Foundation of China(No.12075039)the Youth Science Foundation of China(No.12105030)the Key project of the National Natural Science Foundation of China(No.U19A2086)。
文摘To accurately reconstruct the tomographic gamma scanning(TGS)transmission measurement image,this study optimized the transmission reconstruction equation based on the actual situation of TGS transmission measurement.Using the transmission reconstruction equation and the Monte Carlo program Geant4,an innovative virtual trajectory length model was constructed.This model integrated the solving process for the trajectory length and detection efficiency within the same model.To mitigate the influence of the angular distribution ofγ-rays emitted by the transmitted source at the detector,the transport processes of numerous particles traversing a virtual nuclear waste barrel with a density of zero were simulated.Consequently,a certain amount of information was captured at each step of particle transport.Simultaneously,the model addressed the nonuniform detection efficiency of the detector end face by considering whether the energy deposition of particles in the detector equaled their initial energy.Two models were established to validate the accuracy and reliability of the virtual trajectory length model.Model 1 was a simplified nuclear waste barrel,whereas Model 2 closely resembled the actual structure of a nuclear waste barrel.The results indicated that the proposed virtual trajectory length model significantly enhanced the precision of the trajectory length determination,substantially increasing the quality of the reconstructed images.For example,the reconstructed images of Model 2 using the“point-to-point”and average trajectory models revealed a signalto-noise ratio increase of 375.0%and 112.7%,respectively.Thus,the virtual trajectory length model proposed in this study holds paramount significance for the precise reconstruction of transmission images.Moreover,it can provide support for the accurate detection of radioactive activity in nuclear waste barrels.
基金support from a Grant-in-Aid for Scientific Research(KAKENHI B),Japan(Project/Area code:23H01505)the Institute for Sustainable Future Society,Waseda Research Institute for Science and Engineering,Research Initiatives in Japansupport from the Chinese Scholar Council for PhD scholarships(Grant No.202206220061)was acknowledged。
文摘This paper presents a method for obtaining the displacement of sand particles in a sand–bentonite mixture(SBM)when saturated with water,based on particle tracking velocimetry(PTV).The raw photographs were first converted into binary images.The sand particles were then detected,and the displacement of the sand particles was obtained by comparing their positions in adjacent images.The swelling strain induced by saturation was also obtained using the proposed PTV method.This method was validated by comparing the result with those obtained using a displacement transducer.Subsequently,a comparative analysis of sand particle displacements was conducted for specimens with varying bentonite content(BC),initial thickness,and water infiltration directions.The experimental results obtained were as follows:(1)For specimens with different BCs,local swelling displacement of sand particles at the top part of the specimen increased with higher BCs;(2)For specimens with various heights(hsp),larger local swelling displacement was generated at lower hsp at the initial state;(3)Local swelling characteristics differed in different water infiltration directions.Top-side infiltration showed a significant downward movement of particles during the first several hours of swelling.An estimation method for the dry density distribution of the specimen was proposed based on PTV data and then verified by slicing dry density and water content measurement results.
文摘A central problem in the study of complexity is the measure of nonuniform complexity classes. BPPP/poly has been proved by Aldman, and EXPSPACEP/poly by Kannan. We propose the definition of approximate acceptance with which we discuss the nonuniform complexity of the K sized complete subgraph problem. The method of modal theory is used and the K sized complete subgraph problemP/poly, co NPP/poly and NPP/poly is proved. This paper solves the Karp Lipton′s open problem: “NPP/poly?”
基金The National Natural Science Foundation of China(No.60702027)the Free Research Fund of the National Mobile Communications Research Laboratory of Southeast University (No.2008B07)the National Basic Research Program of China(973 Program)(No.2007CB310603)
文摘With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） method. The reflection of the ABC caused by both the truncated error and the phase velocity error is analyzed. Based on the phase velocity estimation and the nonuniform cell, two methods are studied and then adopted to improve the performance of the ABC. A calculation case of a rectangular waveguide which is a typical dispersive transmission line is carried out using the ADI-FDTD method with the improved ABC for evaluation. According to the calculated case, the comparison is given between the reflection coefficients of the ABC with and without the velocity estimation and also the comparison between the reflection coefficients of the ABC with and without the nonuniform processing. The reflection variation of the ABC under different time steps is also analyzed and the acceptable worsening will not obscure the improvement on the absorption. Numerical results obviously show that efficient improvement on the absorbing performance of the ABC is achieved based on these methods for the ADI-FDTD.
文摘A major motivation for this work is to investigate a method of computer simulation for compensating fixed pattern noise of the infrared focal plane arrays. A mathematical model of the output signal of focal plane array was established; a compensating algorithm utilizing reference source was derived and simulating programs were designed. The images of compensating process verify the influence of nonuniformity of responsibility and offset on fixed pattern noise. The result show that simulating method of investigating compensation technology for focal plane arrays is feasible, the generated images and methods can be used to the study of image recognition.
基金financially supported by the National Natural Science Foundation of China (Nos. 51105068 and 51475086)the Fundamental Research Funds for the Central Universities (Nos. N130323003 and XNB201413)the Science and Technology Research Project for Higher School of Hebei Province (No. Z2013068)
文摘The deformation characteristics of tailor rolled blank （TRB） in the course of uniaxial tension were studied by means of analysis, test and simulation. The mechanical analytical model of TRB during uniaxial tension was set up, and the deformation formulae for the thinner side and for the thicker side were derived to quantify the deformation of TRB. On this basis, uniaxial tension tests on TRB and ordinary blanks （the thinner side and the thicker side of TRB） were conducted. Lagrange polynomial interpolation method was adopted to construct the stress-strain fields of unannealed and annealed TRBs for solving TRB material parameters, and then, uniaxial tension simulation on TRB was completed. Deformations and properties of unannealed TRB were compared with those of annealed TRB, and the thinner side and the thicker side were also compared. Finally, the research results were explained by metallurgical structure. The results show that nonuniform deformation happens in TRB during uniaxial tension, and the necking occurs on the thinner side. The agreement of analysis, test and simulation confirms the correctness of the analytical model and the deformation formulae. The findings of this paper can lay the foundation for the future study on TRB stamping formability and provide a way for TRB modeling.
基金supported by the National Key Research and Development Program of Ministry of Science and Technology of China (Grant 2018YFA0606403 and 2015CB453202)
文摘Based on ensemble experiments with three atmospheric general circulation models(AGCMs), this study investigates the role of the Atlantic Multidecadal Oscillation(AMO) in shaping the summer nonuniform warming over the Eurasian continent since the mid-1990 s. The results validate that the positive-phase AMO can indeed cause nonuniform warming,with predominant amplified warming over Europe–West Asia and Northeast Asia, but with much weaker warming over Central Asia. The underlying mechanism is then diagnosed from the perspective that the boundary forcing modulates the intrinsic atmospheric variability. The results highlight the role of the Silk Road Pattern(SRP), an intrinsic teleconnection pattern across the subtropical Eurasian continent propagating along the Asian jet. The SRP can not only be identified from the AGCM control experiments with the climatological sea surface temperature(SST), but can also be simulated by the AMO-related SST anomaly(SSTA) forcing. Furthermore, diagnostic linear baroclinic model experiments are conducted, and the results suggest that the SRP can be triggered by the AMO-related tropical diabatic heating. The AMO-triggered SRP-like responses feature anticyclonic circulations over Europe–West Asia and Northeast Asia, but cyclonic circulation over Central Asia. These responses cause increased warm advection towards Europe–West Asia and Northeast Asia, reduced precipitation and cloud cover, and then increased downward shortwave radiation. This increased warm advection and increased downward shortwave radiation together cause amplified warming in Europe–West Asia and Northeast Asia. The situation is opposite for Central Asia.
基金supported by 973 Program (2008CB425803)the National Natural Science Foundation of China (Grant No. 50979064)
文摘Dambreak-induced bed scouring may undermine the foundation of bridge piers and other structures,and that destruction can pose a serious threat.Consequently,this paper aims at exploring the mechanisms of scouring and armoring.Firstly,the incipient velocity for nonuniform sediment particles was studied,and a formula was derived based on the angle of repose of nonuniform sediment.The results showed that the mechanism of incipient motion for sand and fine gravel differed from that for coarse gravel and cobbles.Also,comparison between experimental and field data shows that the results from the proposed formula agree well with those observed for all conditions.Secondly,a birth-death,immigration-emigration Markov process was developed to describe the bed load transport rate associated with scouring and armoring.The comparison between experimental data and computed results shows that our model can predict the bed load transport rate,although there may be some limitations,the chief of which is that there are many variables in the model to be determined through experiment.This makes its application in river engineering inconvenient.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52205481,51975305 and 52105457)Shandong Natural Science Foundation(Grant Nos.ZR2020ME158,ZR2023QE057,ZR2022QE028,ZR2021QE116,ZR2020KE027,and ZR2022QE159)+1 种基金Qingdao Science and Technology Planning Park Cultivation Plan(23-1-5-yqpy-17-qy)China Postdoctral Science Foundation(2021M701810).
文摘Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.
文摘The surface undulating shapes of rock joints have been described qualitatively or experimental quantitatively for a long time. The non determined describing method can not fit quantitative evaluation of mechanical parameters of rock joints in engineering. In this paper, relative amplitude ( R A) is chosen as a quantitative describing index of surface measurement of 1 023 surface undulating curves which conducted by profile curve device(PCD). We discuss the nonuniformity,anisotropy and unhomogeneity of surface undulating shapes of joints. A new method that analyzes the complexity of surface undulating shapes of rock joints directional statistically in various rock joints is also put forward.
基金Supported by the Key Project of the Ministry of Education of China under Grant No 106033, and the National Natural Science Foundation of China under Grant Nos 60372095 and 10272017, the Green Path Programme of Air Force of the Chinese People＇s Liberation Army, the Cheung Kong Scholars Programme of the Ministry of Education of China, and Li Ka Shing Foundation of Hong Kong.
文摘Applicable in fluid dynamics and plasmas, a generalized variable-coefficient Korteweg-de Vries （vcKdV） model is investigated. The bilinear form and analytic N-soliton-like solution for such a model are derived by the Hirota method and Wronskian technique. Additionally, the bilinear auto-Bǎcklund transformation between （N-1）- soliton-like and N-soliton-like solutions is verified.
基金The National Natural Science Foundation of China under contract Nos 41606217,41675064 and 41406214the Scientific Research Foundation for the Talent Start-Up of University of Information Science and Technology under contract No.2015r043+1 种基金the Open Fund of the Key Laboratory of Research on Marine Hazards Forecasting under contract No.LOMF1702the China Scholarship Council under contract No.201708320046
文摘The present climate simulations of the mixed layer depth（MLD） and the subduction rate in the subtropical Northeast Pacific are investigated based on nine of the CMIP5 models. Compared with the observation data,spatial patterns of the MLD and the subduction rate are well simulated in these models. The spatial pattern of the MLD is nonuniform, with a local maximum MLD（〉140 m） region centered at（28°N, 135°W） in late winter. The nonuniform MLD pattern causes a strong MLD front on the south of the MLD maximum region, controls the lateral induction rate pattern, and then decides the nonuniform distribution of the subduction rate. Due to the inter-regional difference of the MLD, we divide this area into two regions. The relatively uniform Ekman pumping has little effect on the nonuniform subduction spatial pattern, though it is nearly equal to the lateral induction in values. In the south region, the northward warm Ekman advection（–1.75×10–7 K/s） controls the ocean horizontal temperature advection（–0.85×10–7 K/s）, and prevents the deepening of the MLD. In the ensemble mean, the contribution of the ocean advection to the MLD is about –29.0 m/month, offsetting the sea surface net heat flux contribution（33.9 m/month）. While in the north region, the southward cold advection deepens the MLD（21.4 m/month） as similar as the heat flux（30.4 m/month）. In conclusion, the nonuniform MLD pattern is dominated by the nonuniform ocean horizontal temperature advection. This new finding indicates that the upper ocean current play an important role in the variability of the winter MLD and the subduction rate.
文摘Knowledge of the equilibrium bed-concentration is vital to mathematic a l modeling of the river-bed deformation associated with suspended load but prev i ous investigations only dealt with the reference concentration of uniform sedime nt because of difficulties in observation of the bed-concentration. This work i s a first attempt to develop a theoretical formula for the equilibrium bed-conce n tration of any fraction of nonuniform sediment defined at the bed-surface. The f ormula is based on a stochastic-mechanistic model for the exchange of nonunifor m sediment near the bed, and described as a function of incipient motion probabil ity, non-ceasing probability, pick-up probability, and the ratio of the averag e single-step continuous motion time to static time. Comparison of bed-concentra ti on calculated from the proposed formula with the measured data showed satisfacto ry agreement, indicating the present formula can be used for solving the differe ntial equation governing the motion of suspended load.
基金supported in part by the National Natural Foundation of China(NSFC)(Nos.62027801 and U1833203)the Beijing Natural Science Foundation(No.L191004).
文摘Sampling is a bridge between continuous-time and discrete-time signals,which is import-ant to digital signal processing.The fractional Fourier transform(FrFT)that serves as a generaliz-ation of the FT can characterize signals in multiple fractional Fourier domains,and therefore can provide new perspectives for signal sampling and reconstruction.In this paper,we review recent de-velopments of the sampling theorem associated with the FrFT,including signal reconstruction and fractional spectral analysis of uniform sampling,nonuniform samplings due to various factors,and sub-Nyquist sampling,where bandlimited signals in the fractional Fourier domain are mainly taken into consideration.Moreover,we provide several future research topics of the sampling theorem as-sociated with the FrFT.
基金This research was funded by the Science and Technology Support Plan Project of Hebei Province(grant numbers 17210803D and 19273703D)the Science and Technology Spark Project of the Hebei Seismological Bureau(grant number DZ20180402056)+1 种基金the Education Department of Hebei Province(grant number QN2018095)the Polytechnic College of Hebei University of Science and Technology.
文摘In a large-scale wireless sensor network(WSN),densely distributed sensor nodes process a large amount of data.The aggregation of data in a network can consume a great amount of energy.To balance and reduce the energy consumption of nodes in a WSN and extend the network life,this paper proposes a nonuniform clustering routing algorithm based on the improved K-means algorithm.The algorithm uses a clustering method to form and optimize clusters,and it selects appropriate cluster heads to balance network energy consumption and extend the life cycle of the WSN.To ensure that the cluster head(CH)selection in the network is fair and that the location of the selected CH is not concentrated within a certain range,we chose the appropriate CH competition radius.Simulation results show that,compared with LEACH,LEACH-C,and the DEEC clustering algorithm,this algorithm can effectively balance the energy consumption of the CH and extend the network life.
基金supported by the National Natural Science Foundation of China(61271398)K.C.Wong Magna Fund in Ningbo University
文摘In this work, the image reconstruction in π-scheme short-scan single-photon emission computed tomography （SPECT） with nonuniform attenuation is derived in its most general form when π-scheme short-scan SPECT entails data acquisition over disjoint angular intervals without conjugate views totaling to π radians. The reconstruction results are based on decomposition of Novikov＇s inversion operator into three parts bounded in the L2 sense. The first part involves the measured partial data; the second part is a skew-symmetric operator; the third part is a symmetric and compact contribution. It is showed firstly that the operators involved belong to L（L^2（B）. Furthermore numerical simulations are conducted to demonstrate the effectiveness of the developed method.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61574112,61334002,61474091,and 61574110)the Natural Science Basic Research Plan in Shaanxi Province,China(Grant No.605119425012)
文摘A novel Ga N-based vertical heterostructure field effect transistor（HFET） with nonuniform doping superjunctions（non-SJ HFET） is proposed and studied by Silvaco-ATLAS,for minimizing the specific on-resistance（RonA） at no expense of breakdown voltage（BV）.The feature of non-SJ HFET lies in the nonuniform doping concentration from top to bottom in the n-and p-pillars,which is different from that of the conventional Ga N-based vertical HFET with uniform doping superjunctions（un-SJ HFET）.A physically intrinsic mechanism for the nonuniform doping superjunction（non-SJ） to further reduce RonA at no expense of BV is investigated and revealed in detail.The design,related to the structure parameters of non-SJ,is optimized to minimize the RonA on the basis of the same BV as that of un-SJ HFET.Optimized simulation results show that the reduction in RonA depends on the doping concentrations and thickness values of the light and heavy doping parts in non-SJ.The maximum reduction of more than 51% in RonA could be achieved with a BV of 1890 V.These results could demonstrate the superiority of non-SJ HFET in minimizing RonA and provide a useful reference for further developing the Ga N-based vertical HFETs.
文摘Pairwise thermal entanglement in a three-qubit Heisenberg XX model is investigated when a nonuniform mag- netic field and the Dzyaloshinski-Moriya interaction are included. We find that the nonuniform magnetic field and Dzyaloshinski-Moriya interaction are the more efficient control parameters for the increase of entanglement and critical temperature. For both the nearest neighbour sites and the next nearest neighbour sites, the magnetic field can induce entanglement to a certain extent and the Dzyaloshinski-Moriya interaction can enhance the entanglement to a stable value. The steady value of the nearest neighbour site entanglement C12 is larger than the next nearest neighbour site entanglement C13. An interesting phenomenon is that the entanglement curve of C12 appears a peak value when the Dzyaloshinski-Moriya interaction is considered in a nonuniform magnetic field.
