The offshore renewable energy industry has been developing farms of floating offshore wind turbines in water depths up to 100 m.In Vietnam,floating offshore wind turbines have been developed to increase the production...The offshore renewable energy industry has been developing farms of floating offshore wind turbines in water depths up to 100 m.In Vietnam,floating offshore wind turbines have been developed to increase the production of clean and sustainable energy.The mooring system,which is used to keep the turbine stable and ensure the safety and economic efficiency of wind power production,is an important part of a floating offshore wind turbine.Appropriate selection of the mooring type and mooring line material can reduce the risks arising from the motion of wind turbines.Different types of mooring line material have been simulated and compared in order to determine the optimal type with the minimum motion risk for a floating wind turbine.This study focused on numerical modeling of semi-taut mooring systems using nonlinear materials for a semi-submersible wind turbine.Several modeling approaches common to current practice were applied.Hydrodynamic analysis was performed to investigate the motion of the response amplitude operators of the floating wind turbine.Dynamic analysis of mooring systems was performed using a time domain to obtain the tension responses of mooring lines under the ultimate limit states and fatigue limit states in Vietnamese sea conditions.The results showed that the use of nonlinear materials(polyester and/or nylon)for mooring systems can minimize the movement of the turbine and save costs.The use of synthetic fibers can reduce the maximum tension in mooring lines and the length of mooring lines.However,synthetic fiber ropes showed highly nonlinear load elongation properties,which were difficult to simulate using numerical software.The comparison of the characteristics of polyester and nylon mooring lines showed that the maximum and mean tensions of the nylon line were less than those of the polyester line.In addition,the un-stretched length of the polyester line was greater than that of the nylon line under the same mean tension load.Therefore,nylon material is recommended for the mooring lines of a floating offshore wind turbine.展开更多
Honeycomb structures of shape memory alloy(SMA)have become one of the most promising materials for flexible skins of morphing aircraft due to their excellent mechanical properties.However,due to the nonlinear material...Honeycomb structures of shape memory alloy(SMA)have become one of the most promising materials for flexible skins of morphing aircraft due to their excellent mechanical properties.However,due to the nonlinear material and geometric large deformation,the SMA honeycomb exhibits significant and complex nonlinearity in the skin and there is a lack of relevant previous research.In this paper,the nonlinear properties of the SMA honeycomb structure with arbitrary geometry are investigated for the first time for large deformation flexible skin applications by theoretical and experimental analysis.Firstly,a novel theoretical model of SMA honeycomb structure considering both material and geometric nonlinearity is proposed,and the corresponding calculation method of nonlinear governing equations is given based upon the shooting method and Runge–Kutta method.Then,the tensile behaviors of four kinds of SMA honeycomb structures,i.e.,U-type,V-type,cosine-type,and trapezoid-type,are analyzed and predicted by the proposed theoretical model and compared with the finite element analysis(FEA)results.Moreover,the tensile experiments were carried out by stretching U-type and V-type honeycomb structures to a global strain of 60%and 40%,respectively,to perform large deformation analysis and verify the theoretical model.Finally,experimental verification and finite element validation show that the curves of the theoretical model results,experimental results,and simulation results are in good agreement,illustrating the generalizability and accuracy of the proposed theoretical model.The theoretical model and experimental investigations in this paper are considered to provide an effective foundation for analyzing and predicting the mechanical behavior of SMA honeycomb flexible skins with large extensional deformations.展开更多
It has recently been demonstrated that various topological states, including Dirac, Weyl, nodal-line, and triplepoint semimetal phases, can emerge in antiferromagnetic(AFM) half-Heusler compounds. However, how to dete...It has recently been demonstrated that various topological states, including Dirac, Weyl, nodal-line, and triplepoint semimetal phases, can emerge in antiferromagnetic(AFM) half-Heusler compounds. However, how to determine the AFM structure and to distinguish different topological phases from transport behaviors remains unknown. We show that, due to the presence of combined time-reversal and fractional translation symmetry, the recently proposed second-order nonlinear Hall effect can be used to characterize different topological phases with various AFM configurations. Guided by the symmetry analysis, we obtain expressions of the Berry curvature dipole for different AFM configurations. Based on the effective model, we explicitly calculate the Berry curvature dipole, which is found to be vanishingly small for the triple-point semimetal phase, and large in the Weyl semimetal phase. Our results not only put forward an effective method for the identification of magnetic orders and topological phases in AFM half-Heusler materials, but also suggest these materials as a versatile platform for engineering the nonlinear Hall effect.展开更多
we have synthesised a series of new optically nonlinear organic materials of cinnamylidene-acetophenone derivatives which have large nonl inear optical susceptibilities and short cut-off wavelengths.
In this paper, on the basis of the incremental Reissner variational principle.a nonlinear finite element analysis has been accomplished and a formulation of hybrid stress element has been presented for incompressible ...In this paper, on the basis of the incremental Reissner variational principle.a nonlinear finite element analysis has been accomplished and a formulation of hybrid stress element has been presented for incompressible Mooney rubber-like materials. The corrected terms of the non-equilibrium force and the incompressibility deviation are considered in the formulation. The computed values of numerical example agree very closely with the exact solution.展开更多
hydroxy-4-nitro azobenzene (NHA) and 4-amino-4-nitro azobenzene (DO3) were prepared respectively from p-nitrophenylamine as a precursor compound. Two kinds of doped organic/inorganic hybrid nonlinear optical (NLO) mat...hydroxy-4-nitro azobenzene (NHA) and 4-amino-4-nitro azobenzene (DO3) were prepared respectively from p-nitrophenylamine as a precursor compound. Two kinds of doped organic/inorganic hybrid nonlinear optical (NLO) materials containing NHA and DO3 were synthesized by Sol-Gel process. The preparation and properties of two NLO materials were studied and characterized by FTIR, 1H-NMR, UV-VIS, SEM, DSC and SHG measurements. The results show that the maximum doping amounts of NHA and DO3 in two doped hybrid NLO materials are 7.2(wt)% and 11.3(wt)% respectively, and the corresponding second-order NLO coefficients (d33 values) are 2.91×10 8esu and 6.14×10 8esu. Two doped NLO materials have relatively good RT stability, after 90 days at RT the d33 values can maintain about 85% of their initial values, but after 10h at 100℃ can only maintain about 50% of their initial values. In this report, the reasons for high-temperature instability of doped materials were discussed, and the possible improvements were also suggested.展开更多
It is challenging to cooperatively improve the nonlinear optical(NLO)efficiency and the laser-induced damage threshold(LIDT).This work reports a novel IR NLO materials CsInP_(2)S_(7)(CIPS)designed by combination the s...It is challenging to cooperatively improve the nonlinear optical(NLO)efficiency and the laser-induced damage threshold(LIDT).This work reports a novel IR NLO materials CsInP_(2)S_(7)(CIPS)designed by combination the strategies of alkali metals substitution and microscopic NLO units PS4 introduction based on AgGaS_(2).CIPS was composed of strongly distorted[InS_(6)]^(9-)octahedra and[P_(2)S_(7)]4-dimers constructed by corner-sharing[PS_(4)]^(3-),which increase the NLO efficiency and decrease thermal expansion anisotropy simultaneously.Compared with AgGaS_(2),CIPS exhibited strong phase matchable NLO response ca.1.1×AGS@2.1μm,high LIDT ca.20.8×AgGaS_(2),and IR transparency up to 15.3μm.Structural analysis and theoretical investigation confirmed that large SHG effect and ultrahigh LIDT of CIPS originated from the synergistic contribution of[InS_(6)]^(9-)octahedra and[P_(2)S_(7)]4-dimers.These results indicate that CIPS is a promising NLO candidate in the mid-IR region,and this study provides a new approach for developing potential NLO-LIDT compatible materials.展开更多
This study provides a comprehensive analysis of collision and impact problems’ numerical solutions, focusing ongeometric, contact, and material nonlinearities, all essential in solving large deformation problems duri...This study provides a comprehensive analysis of collision and impact problems’ numerical solutions, focusing ongeometric, contact, and material nonlinearities, all essential in solving large deformation problems during a collision.The initial discussion revolves around the stress and strain of large deformation during a collision, followedby explanations of the fundamental finite element solution method for addressing such issues. The hourglassmode’s control methods, such as single-point reduced integration and contact-collision algorithms are detailedand implemented within the finite element framework. The paper further investigates the dynamic responseand failure modes of Reinforced Concrete (RC) members under asymmetrical impact using a 3D discrete modelin ABAQUS that treats steel bars and concrete connections as bond slips. The model’s validity was confirmedthrough comparisons with the node-sharing algorithm and system energy relations. Experimental parameterswere varied, including the rigid hammer’s mass and initial velocity, concrete strength, and longitudinal and stirrupreinforcement ratios. Findings indicated that increased hammer mass and velocity escalated RC member damage,while increased reinforcement ratios improved impact resistance. Contrarily, increased concrete strength did notsignificantly reduce lateral displacement when considering strain rate effects. The study also explores materialnonlinearity, examining different materials’ responses to collision-induced forces and stresses, demonstratedthrough an elastic rod impact case study. The paper proposes a damage criterion based on the residual axialload-bearing capacity for assessing damage under the asymmetrical impact, showing a correlation betweendamage degree hammer mass and initial velocity. The results, validated through comparison with theoreticaland analytical solutions, verify the ABAQUS program’s accuracy and reliability in analyzing impact problems,offering valuable insights into collision and impact problems’ nonlinearities and practical strategies for enhancingRC structures’ resilience under dynamic stress.展开更多
Due to their unique physical properties,nonlinear materials are gradually demonstrating significant potential in the field of optics.Gold nanoparticles supported on carbon black(Au/CB),possessing low loss and high non...Due to their unique physical properties,nonlinear materials are gradually demonstrating significant potential in the field of optics.Gold nanoparticles supported on carbon black(Au/CB),possessing low loss and high nonlinear characteristics,serve as an excellent material for saturable absorber(SA) in ultrafast fiber lasers.In this study,we investigated the performance of Au/CB material and designed an ultrafast fiber laser based on Au/CB SA,successfully observing stable fundamental mode-locking and pulse bunch phenomena.Specifically,when the fiber laser operates in fundamental mode-locking state,the center wavelength of optical spectrum is 1 558.82 nm,with a 3 dB bandwidth of 2.26 nm.Additionally,to investigate the evolution of real-time spectra,the dispersive Fourier transform(DFT) technology is employed.On the other hand,the pulse bunch emitted by the laser is actually composed of numerous random sub-pulses,exhibiting high-energy characteristics.The number of sub-pulses increases with the increase of pump power.These findings contribute to further exploring the properties of Au/CB material and reveal its potential applications in ultrafast optics.展开更多
The simultaneous achievement of wide band gap and strong nonlinear optical(NLO)effect poses a challenging task in the development of infrared(IR)NLO materials.The coupling strategy of polyhedral building blocks has be...The simultaneous achievement of wide band gap and strong nonlinear optical(NLO)effect poses a challenging task in the development of infrared(IR)NLO materials.The coupling strategy of polyhedral building blocks has been demonstrated to be one of the effective approaches for constructing superior optical materials with well-balanced performance.Here,a new family of IR NLO materials A^(I)_(2)Mg_(3)Ga_(12)S_(22)(AI=K,Rb)that first contain[MgS_(6)]octahedra and T2-type supertetrahedra was designed and synthesized.K_(2)Mg_(3)Ga_(12)S_(22) exhibits a wide band gap of 3.34 eV,and a moderate second-harmonic generation response intensity of 0.4 times that of AgGaS2 under 2µm Q-switched laser radiation.Furthermore,the birefringence of K_(2)Mg_(3)Ga_(12)S_(22) is calculated to be 0.028@1064 nm,resulting in favorable phase-matching behavior in IR region.These characteristics suggest that K_(2)Mg_(3)Ga_(12)S_(22) could be a promising material for nonlinear frequency conversion applications and it provides new ideas into the design of novel compounds with outstanding IR NLO performances.展开更多
A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phas...A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phase transition behavior and crystallinity were characterized by IR,elemental analysis, TG-DTA, polarizing optical microscope (POM) equipped with a hot stage and X-ray diffraction techniques. The results demonstrate that all the synthesized polyesters exhibit nematic liquid crystalline phases and show relatively high glass transition temperatures and good thermal stability.展开更多
A numerical method is presented for the large deflection in elastic analysis of tensegrity structures including both geometric and material nonlinearities.The geometric nonlinearity is considered based on both total L...A numerical method is presented for the large deflection in elastic analysis of tensegrity structures including both geometric and material nonlinearities.The geometric nonlinearity is considered based on both total Lagrangian and updated Lagrangian formulations,while the material nonlinearity is treated through elastoplastic stress-strain relationship.The nonlinear equilibrium equations are solved using an incremental-iterative scheme in conjunction with the modified Newton-Raphson method.A computer program is developed to predict the mechanical responses of tensegrity systems under tensile,compressive and flexural loadings.Numerical results obtained are compared with those reported in the literature to demonstrate the accuracy and efficiency of the proposed program.The flexural behavior of the double layer quadruplex tensegrity grid is sufficiently good for lightweight large-span structural applications.On the other hand,its bending strength capacity is not sensitive to the self-stress level.展开更多
Due to the remarkable carrier mobility and nonlinear characteristic, MoS2 is considered to be a powerful competitor as an effective optical modulated material in fiber lasers. In this paper, the MoS2 films are prepare...Due to the remarkable carrier mobility and nonlinear characteristic, MoS2 is considered to be a powerful competitor as an effective optical modulated material in fiber lasers. In this paper, the MoS2 films are prepared by the chemical vapor deposition method to guarantee the high quality of the crystal lattice and uniform thickness. The transfer of the films to microfiber and the operation of gold plated films ensure there is no heat-resistant damage and anti-oxidation. The modulation depth of the prepared integrated microfiber-MoS2 saturable absorber is 11.07%. When the microfiber-MoS2 saturable absorber is used as a light modulator in the Q-switching fiber laser, the stable pulse train with a pulse duration of 888 ns at 1530.9 nm is obtained. The ultimate output power and pulse energy of output pulses are 18.8 mW and 88 nJ, respectively. The signal-to-noise ratio up to 60 dB indicates the good stability of the laser. This work demonstrates that the MoS2 saturable absorber prepared by the chemical vapor deposition method can serve as an effective nonlinear control device for the Q-switching fiber laser.展开更多
A new theory developed from extended high-order sandwich panel theory(EHSAPT)is set up to assess the static response of sandwich panels by considering the geometrical and material nonlinearities simultaneously.The geo...A new theory developed from extended high-order sandwich panel theory(EHSAPT)is set up to assess the static response of sandwich panels by considering the geometrical and material nonlinearities simultaneously.The geometrical nonlinearity is considered by adopting the Green-Lagrange-type strain for the face sheets and core.The material nonlinearity is included as a piecewise function matched to the experimental stress-strain curve using a polynomial fitting technique.A Ritz technique is applied to solve the governing equations.The results show that the stress stiffening feature is well captured in the geometric nonlinear analysis.The effect of the geometric nonlinearity in the face sheets on the displacement response is more significant when the stiffness ratio of the face sheets to the core is large.The geometric nonlinearity decreases the shear stress and increases the normal stress in the sandwich core.By comparison with open literature and finite element simulations,the present nonlinear EHSAPT is shown to be sufficiently precise for estimating the nonlinear static response of sandwich beams by considering the geometric and material nonlinearities simultaneously.展开更多
AgGa_(1-x)In_(x)Se_(2)polycrystals were synthesized by the method of mechanical oscillation and temperature oscillation.X-ray diffraction spectra of polycrystal powder are conformable with the JCPDS cards.Lattice cons...AgGa_(1-x)In_(x)Se_(2)polycrystals were synthesized by the method of mechanical oscillation and temperature oscillation.X-ray diffraction spectra of polycrystal powder are conformable with the JCPDS cards.Lattice constants a and c calculated from the XRD were found to obey Vegard's law.The melting point of AgGa_(0.8)In_(0.2)Se_(2)obtained by means of differential scanning calorimetry(DSC)is 796.53℃.The DSC curve also show that there are no other transformation points below the melting point.The results indicate that polycrystalline materials synthesized by the method mentioned above are high-quality and can be used to grow single crystals by the vertical Bridgman technology.展开更多
A new organic/inorganic hybrid nonlinear optical (NLO) material was developed by the sol-gel process of an alkoxysilane dye with tetraethoxysilane. A NLO moiety based on 4-nitro-4 ' -hydroxy azobenzene was covalen...A new organic/inorganic hybrid nonlinear optical (NLO) material was developed by the sol-gel process of an alkoxysilane dye with tetraethoxysilane. A NLO moiety based on 4-nitro-4 ' -hydroxy azobenzene was covalently bonded to the triethoxysilane derivative, i.e, gamma -isocyanatopropyl triethoxysilane. The preparation process and properties of the sol-gel derived NLO polymer were studied and characterized by SEM, FTIR,H-1-NMR, UV-Vis, DSC and second harmonic generation (SHG) measurement. The results indicated that the chemical bonding of the chromophores to the inorganic SiO2 networks induces low dipole alignment relaxation and preferable orientational stability. The SHG measurements also showed that the bonded polymer film containing 75 wt% of the akoxysilane dye has a high electro-optic coefficient (r(33)) of 7.1 pm/V at 1.1 mum wavelength, and exhibit good SHG stability, the r(33) values can maintain about 92.7% of its initial value at room temperature for 90 days, and can maintain about 59.3% at 100 degreesC for 300 min.展开更多
The nonlinear dynamic characteristics of a pile embedded in a rock were investigated. Suppose that both the materials of the pile and the soil around the pile obey nonlinear elastic and linear viscoelastic constitutiv...The nonlinear dynamic characteristics of a pile embedded in a rock were investigated. Suppose that both the materials of the pile and the soil around the pile obey nonlinear elastic and linear viscoelastic constitutive relations. The nonlinear partial differential equation governing the dynamic characteristics of the pile was first derived. The Galerkin method was used to simplify the equation and to obtain a nonlinear ordinary differential equation. The methods in nonlinear dynamics were employed to solve the simplified dynamical system, and the time-path curves, phase-trajectory diagrams, power spectrum, Poincare sections and bifurcation and chaos diagrams of the motion of the pile were obtained. The effects of parameters on the dynamic characteristics of the system were also considered in detail.展开更多
Most of the previous research on concrete-filled steel tube is restricted to a deterministic approach. To gain clear insight into the random properties of circular concrete-filled steel tube, reliability analysis is c...Most of the previous research on concrete-filled steel tube is restricted to a deterministic approach. To gain clear insight into the random properties of circular concrete-filled steel tube, reliability analysis is carried out in the present study. To obtain the Structural nonlinear response and ultimate resistance capacity, material and geometrical nonlinear analysis of circular concrete-filled steel tube is performed with a three-dimensional degenerated beam ele- ment. Then we investigate the reliability of concrete-filled steel tube using the first-order reliability method combined with nonlinear finite element analysis. The influences of such parameters as material strength, slenderness, initial geo- metrical imperfection, etc. on the reliability of circular concrete-filled steel tube column are studied. It can be con- cluded that inevitable random fluctuation of those parameters has significant influence on structural reliability, and that stochastic or reliability methods can provide a more rational and subjective evaluation on the safety of CFT structures than a deterministic approach.展开更多
Owing to the enormously enhanced oscillating wave,a minute variation of the incident light intensity will give rise to a change in the dielectric constant of the Kerr nonlinear medium and lead to a bistable reflection...Owing to the enormously enhanced oscillating wave,a minute variation of the incident light intensity will give rise to a change in the dielectric constant of the Kerr nonlinear medium and lead to a bistable reflection with an ultra-low threshold intensity,which is closely related to the angle of incidence and the thickness of the Kerr nonlinear medium.The criterion for the existence of optical bistability is derived.Our bistability scheme is simple and not limited to the TM-polarization.展开更多
In the current investigation,L-proline cadmium chloride monohydrate（LPCC） single crystal is grown by a slow solvent evaporation technique to identify its credibility for nonlinear optical device applications.The con...In the current investigation,L-proline cadmium chloride monohydrate（LPCC） single crystal is grown by a slow solvent evaporation technique to identify its credibility for nonlinear optical device applications.The constituent elements of LPCC crystal are determined by the energy dispersive spectroscopic（EDS） technique.The single crystal x-ray diffraction technique is used to determine the structural dimensions of LPCC crystal.The UV-visible studies are carried out within a wavelength range of 200 nm–1100 nm to determine the optical transmittance of LPCC crystal.The linear optical parameters of LPCC crystal are evaluated using the transmittance data to discuss its importance for distinct optical devices.The Nd：YAG laser assisted Kurtz–Perry test is carried out to determine the enhancement in second harmonic generation efficiency of LPCC crystal with reference to KDP crystal.The Z-scan technique is employed to assess the third order nonlinear optical（TONLO） properties of LPCC crystal at 632.8 nm.The Z-scan data are utilized to evaluate the TONLO refraction,absorption and susceptibility of LPCC crystal.The color oriented luminescence behavior of LPCC crystal is investigated within a spectral range of 350 nm–700 nm.The dependence of dielectric constant and dielectric loss on temperature and frequency is evaluated through the dielectric measurement studies.展开更多
文摘The offshore renewable energy industry has been developing farms of floating offshore wind turbines in water depths up to 100 m.In Vietnam,floating offshore wind turbines have been developed to increase the production of clean and sustainable energy.The mooring system,which is used to keep the turbine stable and ensure the safety and economic efficiency of wind power production,is an important part of a floating offshore wind turbine.Appropriate selection of the mooring type and mooring line material can reduce the risks arising from the motion of wind turbines.Different types of mooring line material have been simulated and compared in order to determine the optimal type with the minimum motion risk for a floating wind turbine.This study focused on numerical modeling of semi-taut mooring systems using nonlinear materials for a semi-submersible wind turbine.Several modeling approaches common to current practice were applied.Hydrodynamic analysis was performed to investigate the motion of the response amplitude operators of the floating wind turbine.Dynamic analysis of mooring systems was performed using a time domain to obtain the tension responses of mooring lines under the ultimate limit states and fatigue limit states in Vietnamese sea conditions.The results showed that the use of nonlinear materials(polyester and/or nylon)for mooring systems can minimize the movement of the turbine and save costs.The use of synthetic fibers can reduce the maximum tension in mooring lines and the length of mooring lines.However,synthetic fiber ropes showed highly nonlinear load elongation properties,which were difficult to simulate using numerical software.The comparison of the characteristics of polyester and nylon mooring lines showed that the maximum and mean tensions of the nylon line were less than those of the polyester line.In addition,the un-stretched length of the polyester line was greater than that of the nylon line under the same mean tension load.Therefore,nylon material is recommended for the mooring lines of a floating offshore wind turbine.
基金supported by the National Key Research and Development Program of China(No.2020YFB1708303)the National Natural Science Foundation of China(Nos.U1808215 and 12072058)the Fundamental Research Funds for the Central Universities of China(DUT20LK02).
文摘Honeycomb structures of shape memory alloy(SMA)have become one of the most promising materials for flexible skins of morphing aircraft due to their excellent mechanical properties.However,due to the nonlinear material and geometric large deformation,the SMA honeycomb exhibits significant and complex nonlinearity in the skin and there is a lack of relevant previous research.In this paper,the nonlinear properties of the SMA honeycomb structure with arbitrary geometry are investigated for the first time for large deformation flexible skin applications by theoretical and experimental analysis.Firstly,a novel theoretical model of SMA honeycomb structure considering both material and geometric nonlinearity is proposed,and the corresponding calculation method of nonlinear governing equations is given based upon the shooting method and Runge–Kutta method.Then,the tensile behaviors of four kinds of SMA honeycomb structures,i.e.,U-type,V-type,cosine-type,and trapezoid-type,are analyzed and predicted by the proposed theoretical model and compared with the finite element analysis(FEA)results.Moreover,the tensile experiments were carried out by stretching U-type and V-type honeycomb structures to a global strain of 60%and 40%,respectively,to perform large deformation analysis and verify the theoretical model.Finally,experimental verification and finite element validation show that the curves of the theoretical model results,experimental results,and simulation results are in good agreement,illustrating the generalizability and accuracy of the proposed theoretical model.The theoretical model and experimental investigations in this paper are considered to provide an effective foundation for analyzing and predicting the mechanical behavior of SMA honeycomb flexible skins with large extensional deformations.
基金Supported by the National Natural Science Foundation of China (Grant Nos.11834006,12074181,and 11674165)the Natural Science Foundation of Jiangsu Province (Grant No.BK20200007)+1 种基金the Fok Ying-Tong Education Foundation of China (Grant No.161006)the Fundamental Research Funds for the Central Universities (Grant No.020414380149)。
文摘It has recently been demonstrated that various topological states, including Dirac, Weyl, nodal-line, and triplepoint semimetal phases, can emerge in antiferromagnetic(AFM) half-Heusler compounds. However, how to determine the AFM structure and to distinguish different topological phases from transport behaviors remains unknown. We show that, due to the presence of combined time-reversal and fractional translation symmetry, the recently proposed second-order nonlinear Hall effect can be used to characterize different topological phases with various AFM configurations. Guided by the symmetry analysis, we obtain expressions of the Berry curvature dipole for different AFM configurations. Based on the effective model, we explicitly calculate the Berry curvature dipole, which is found to be vanishingly small for the triple-point semimetal phase, and large in the Weyl semimetal phase. Our results not only put forward an effective method for the identification of magnetic orders and topological phases in AFM half-Heusler materials, but also suggest these materials as a versatile platform for engineering the nonlinear Hall effect.
文摘we have synthesised a series of new optically nonlinear organic materials of cinnamylidene-acetophenone derivatives which have large nonl inear optical susceptibilities and short cut-off wavelengths.
文摘In this paper, on the basis of the incremental Reissner variational principle.a nonlinear finite element analysis has been accomplished and a formulation of hybrid stress element has been presented for incompressible Mooney rubber-like materials. The corrected terms of the non-equilibrium force and the incompressibility deviation are considered in the formulation. The computed values of numerical example agree very closely with the exact solution.
基金Plan Project of Science and Technology of Guangzhou City (2002J1-C0061) The First Author: XI Hongxia(1968-)
文摘hydroxy-4-nitro azobenzene (NHA) and 4-amino-4-nitro azobenzene (DO3) were prepared respectively from p-nitrophenylamine as a precursor compound. Two kinds of doped organic/inorganic hybrid nonlinear optical (NLO) materials containing NHA and DO3 were synthesized by Sol-Gel process. The preparation and properties of two NLO materials were studied and characterized by FTIR, 1H-NMR, UV-VIS, SEM, DSC and SHG measurements. The results show that the maximum doping amounts of NHA and DO3 in two doped hybrid NLO materials are 7.2(wt)% and 11.3(wt)% respectively, and the corresponding second-order NLO coefficients (d33 values) are 2.91×10 8esu and 6.14×10 8esu. Two doped NLO materials have relatively good RT stability, after 90 days at RT the d33 values can maintain about 85% of their initial values, but after 10h at 100℃ can only maintain about 50% of their initial values. In this report, the reasons for high-temperature instability of doped materials were discussed, and the possible improvements were also suggested.
基金the Natural Science Foundation of China(No.22105218).
文摘It is challenging to cooperatively improve the nonlinear optical(NLO)efficiency and the laser-induced damage threshold(LIDT).This work reports a novel IR NLO materials CsInP_(2)S_(7)(CIPS)designed by combination the strategies of alkali metals substitution and microscopic NLO units PS4 introduction based on AgGaS_(2).CIPS was composed of strongly distorted[InS_(6)]^(9-)octahedra and[P_(2)S_(7)]4-dimers constructed by corner-sharing[PS_(4)]^(3-),which increase the NLO efficiency and decrease thermal expansion anisotropy simultaneously.Compared with AgGaS_(2),CIPS exhibited strong phase matchable NLO response ca.1.1×AGS@2.1μm,high LIDT ca.20.8×AgGaS_(2),and IR transparency up to 15.3μm.Structural analysis and theoretical investigation confirmed that large SHG effect and ultrahigh LIDT of CIPS originated from the synergistic contribution of[InS_(6)]^(9-)octahedra and[P_(2)S_(7)]4-dimers.These results indicate that CIPS is a promising NLO candidate in the mid-IR region,and this study provides a new approach for developing potential NLO-LIDT compatible materials.
基金the authority of the National Natural Science Foundation of China(Grant Nos.52178168 and 51378427)for financing this research work and several ongoing research projects related to structural impact performance.
文摘This study provides a comprehensive analysis of collision and impact problems’ numerical solutions, focusing ongeometric, contact, and material nonlinearities, all essential in solving large deformation problems during a collision.The initial discussion revolves around the stress and strain of large deformation during a collision, followedby explanations of the fundamental finite element solution method for addressing such issues. The hourglassmode’s control methods, such as single-point reduced integration and contact-collision algorithms are detailedand implemented within the finite element framework. The paper further investigates the dynamic responseand failure modes of Reinforced Concrete (RC) members under asymmetrical impact using a 3D discrete modelin ABAQUS that treats steel bars and concrete connections as bond slips. The model’s validity was confirmedthrough comparisons with the node-sharing algorithm and system energy relations. Experimental parameterswere varied, including the rigid hammer’s mass and initial velocity, concrete strength, and longitudinal and stirrupreinforcement ratios. Findings indicated that increased hammer mass and velocity escalated RC member damage,while increased reinforcement ratios improved impact resistance. Contrarily, increased concrete strength did notsignificantly reduce lateral displacement when considering strain rate effects. The study also explores materialnonlinearity, examining different materials’ responses to collision-induced forces and stresses, demonstratedthrough an elastic rod impact case study. The paper proposes a damage criterion based on the residual axialload-bearing capacity for assessing damage under the asymmetrical impact, showing a correlation betweendamage degree hammer mass and initial velocity. The results, validated through comparison with theoreticaland analytical solutions, verify the ABAQUS program’s accuracy and reliability in analyzing impact problems,offering valuable insights into collision and impact problems’ nonlinearities and practical strategies for enhancingRC structures’ resilience under dynamic stress.
基金supported by the Natural Science Foundation of Guangdong Province (No.2023A1515010093)the Shenzhen Fundamental Research Program (Nos.JCYJ20220809170611004, JCYJ20231121110828001 and JCYJ20231121113641002)。
文摘Due to their unique physical properties,nonlinear materials are gradually demonstrating significant potential in the field of optics.Gold nanoparticles supported on carbon black(Au/CB),possessing low loss and high nonlinear characteristics,serve as an excellent material for saturable absorber(SA) in ultrafast fiber lasers.In this study,we investigated the performance of Au/CB material and designed an ultrafast fiber laser based on Au/CB SA,successfully observing stable fundamental mode-locking and pulse bunch phenomena.Specifically,when the fiber laser operates in fundamental mode-locking state,the center wavelength of optical spectrum is 1 558.82 nm,with a 3 dB bandwidth of 2.26 nm.Additionally,to investigate the evolution of real-time spectra,the dispersive Fourier transform(DFT) technology is employed.On the other hand,the pulse bunch emitted by the laser is actually composed of numerous random sub-pulses,exhibiting high-energy characteristics.The number of sub-pulses increases with the increase of pump power.These findings contribute to further exploring the properties of Au/CB material and reveal its potential applications in ultrafast optics.
基金supported by the Natural Science Foundation of the Xinjiang Uygur Autonomous Region(2023D01A04 and 2022D01B206)the Shanghai Cooperation Organization Science and Technology Partnership Program(2023E01001)+1 种基金the National Natural Science Foundation of China(22335007,22361132544,62305382,and 52302011)the support from Tianchi Doctor Plan of Xinjiang Uygur Autonomous Region。
文摘The simultaneous achievement of wide band gap and strong nonlinear optical(NLO)effect poses a challenging task in the development of infrared(IR)NLO materials.The coupling strategy of polyhedral building blocks has been demonstrated to be one of the effective approaches for constructing superior optical materials with well-balanced performance.Here,a new family of IR NLO materials A^(I)_(2)Mg_(3)Ga_(12)S_(22)(AI=K,Rb)that first contain[MgS_(6)]octahedra and T2-type supertetrahedra was designed and synthesized.K_(2)Mg_(3)Ga_(12)S_(22) exhibits a wide band gap of 3.34 eV,and a moderate second-harmonic generation response intensity of 0.4 times that of AgGaS2 under 2µm Q-switched laser radiation.Furthermore,the birefringence of K_(2)Mg_(3)Ga_(12)S_(22) is calculated to be 0.028@1064 nm,resulting in favorable phase-matching behavior in IR region.These characteristics suggest that K_(2)Mg_(3)Ga_(12)S_(22) could be a promising material for nonlinear frequency conversion applications and it provides new ideas into the design of novel compounds with outstanding IR NLO performances.
文摘A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phase transition behavior and crystallinity were characterized by IR,elemental analysis, TG-DTA, polarizing optical microscope (POM) equipped with a hot stage and X-ray diffraction techniques. The results demonstrate that all the synthesized polyesters exhibit nematic liquid crystalline phases and show relatively high glass transition temperatures and good thermal stability.
基金support of the research reported here by Basic Science Research Program through the National Research Foundation of Korea (NRF)funded by the Ministry of Education, Science and Technology (NRF2010-0019373)
文摘A numerical method is presented for the large deflection in elastic analysis of tensegrity structures including both geometric and material nonlinearities.The geometric nonlinearity is considered based on both total Lagrangian and updated Lagrangian formulations,while the material nonlinearity is treated through elastoplastic stress-strain relationship.The nonlinear equilibrium equations are solved using an incremental-iterative scheme in conjunction with the modified Newton-Raphson method.A computer program is developed to predict the mechanical responses of tensegrity systems under tensile,compressive and flexural loadings.Numerical results obtained are compared with those reported in the literature to demonstrate the accuracy and efficiency of the proposed program.The flexural behavior of the double layer quadruplex tensegrity grid is sufficiently good for lightweight large-span structural applications.On the other hand,its bending strength capacity is not sensitive to the self-stress level.
基金Project supported by the National Natural Science Foundation of China(Grant No.11674036)the Beijing Youth Top-notch Talent Support Program,China(Grant No.2017000026833ZK08)the Fund of State Key Laboratory of Information Photonics and Optical Communications,Beijing University of Posts and Telecommunications,China(Grant Nos.IPOC2016ZT04 and IPOC2017ZZ05)
文摘Due to the remarkable carrier mobility and nonlinear characteristic, MoS2 is considered to be a powerful competitor as an effective optical modulated material in fiber lasers. In this paper, the MoS2 films are prepared by the chemical vapor deposition method to guarantee the high quality of the crystal lattice and uniform thickness. The transfer of the films to microfiber and the operation of gold plated films ensure there is no heat-resistant damage and anti-oxidation. The modulation depth of the prepared integrated microfiber-MoS2 saturable absorber is 11.07%. When the microfiber-MoS2 saturable absorber is used as a light modulator in the Q-switching fiber laser, the stable pulse train with a pulse duration of 888 ns at 1530.9 nm is obtained. The ultimate output power and pulse energy of output pulses are 18.8 mW and 88 nJ, respectively. The signal-to-noise ratio up to 60 dB indicates the good stability of the laser. This work demonstrates that the MoS2 saturable absorber prepared by the chemical vapor deposition method can serve as an effective nonlinear control device for the Q-switching fiber laser.
基金the National Natural Science Foundation of China(Grant 11432004).
文摘A new theory developed from extended high-order sandwich panel theory(EHSAPT)is set up to assess the static response of sandwich panels by considering the geometrical and material nonlinearities simultaneously.The geometrical nonlinearity is considered by adopting the Green-Lagrange-type strain for the face sheets and core.The material nonlinearity is included as a piecewise function matched to the experimental stress-strain curve using a polynomial fitting technique.A Ritz technique is applied to solve the governing equations.The results show that the stress stiffening feature is well captured in the geometric nonlinear analysis.The effect of the geometric nonlinearity in the face sheets on the displacement response is more significant when the stiffness ratio of the face sheets to the core is large.The geometric nonlinearity decreases the shear stress and increases the normal stress in the sandwich core.By comparison with open literature and finite element simulations,the present nonlinear EHSAPT is shown to be sufficiently precise for estimating the nonlinear static response of sandwich beams by considering the geometric and material nonlinearities simultaneously.
基金Project supported by the Specialized Research Fund for the Doctoral Program of Higher Education(20040610024)
文摘AgGa_(1-x)In_(x)Se_(2)polycrystals were synthesized by the method of mechanical oscillation and temperature oscillation.X-ray diffraction spectra of polycrystal powder are conformable with the JCPDS cards.Lattice constants a and c calculated from the XRD were found to obey Vegard's law.The melting point of AgGa_(0.8)In_(0.2)Se_(2)obtained by means of differential scanning calorimetry(DSC)is 796.53℃.The DSC curve also show that there are no other transformation points below the melting point.The results indicate that polycrystalline materials synthesized by the method mentioned above are high-quality and can be used to grow single crystals by the vertical Bridgman technology.
基金This work was supported by the Postdoctoral Science Foundation of Guangdong Province (No. 9644) and the Natural Science Fund of Guangdong Province(No. 990629).
文摘A new organic/inorganic hybrid nonlinear optical (NLO) material was developed by the sol-gel process of an alkoxysilane dye with tetraethoxysilane. A NLO moiety based on 4-nitro-4 ' -hydroxy azobenzene was covalently bonded to the triethoxysilane derivative, i.e, gamma -isocyanatopropyl triethoxysilane. The preparation process and properties of the sol-gel derived NLO polymer were studied and characterized by SEM, FTIR,H-1-NMR, UV-Vis, DSC and second harmonic generation (SHG) measurement. The results indicated that the chemical bonding of the chromophores to the inorganic SiO2 networks induces low dipole alignment relaxation and preferable orientational stability. The SHG measurements also showed that the bonded polymer film containing 75 wt% of the akoxysilane dye has a high electro-optic coefficient (r(33)) of 7.1 pm/V at 1.1 mum wavelength, and exhibit good SHG stability, the r(33) values can maintain about 92.7% of its initial value at room temperature for 90 days, and can maintain about 59.3% at 100 degreesC for 300 min.
基金Project supported by the National Natural Science Foundation of China （Grant No.50278051）, and the Shanghai Leading Academic Discipline Project （Grant No.Y0103）
文摘The nonlinear dynamic characteristics of a pile embedded in a rock were investigated. Suppose that both the materials of the pile and the soil around the pile obey nonlinear elastic and linear viscoelastic constitutive relations. The nonlinear partial differential equation governing the dynamic characteristics of the pile was first derived. The Galerkin method was used to simplify the equation and to obtain a nonlinear ordinary differential equation. The methods in nonlinear dynamics were employed to solve the simplified dynamical system, and the time-path curves, phase-trajectory diagrams, power spectrum, Poincare sections and bifurcation and chaos diagrams of the motion of the pile were obtained. The effects of parameters on the dynamic characteristics of the system were also considered in detail.
基金supported by the Fundamental Research Funds for the Central Universities (SWJTU09CX012 and SWJTU11BR006)the Doctoral Fund for Youth Scholars of Ministry of Educationof China (No. 20110184120010)
文摘Most of the previous research on concrete-filled steel tube is restricted to a deterministic approach. To gain clear insight into the random properties of circular concrete-filled steel tube, reliability analysis is carried out in the present study. To obtain the Structural nonlinear response and ultimate resistance capacity, material and geometrical nonlinear analysis of circular concrete-filled steel tube is performed with a three-dimensional degenerated beam ele- ment. Then we investigate the reliability of concrete-filled steel tube using the first-order reliability method combined with nonlinear finite element analysis. The influences of such parameters as material strength, slenderness, initial geo- metrical imperfection, etc. on the reliability of circular concrete-filled steel tube column are studied. It can be con- cluded that inevitable random fluctuation of those parameters has significant influence on structural reliability, and that stochastic or reliability methods can provide a more rational and subjective evaluation on the safety of CFT structures than a deterministic approach.
基金Projected supported by the Open Fund by State Key Laboratory of Advanced Optical Communication Systems and Networks(Grant No.2017GZKF18)the National Natural Science Foundation of China(Grant Nos.12064017,61765008,11764020,11864017,11804133,and 51567011)+3 种基金the Jiangxi Provincial Natural Science Foundation(Grant No.20181BAB206034)the Fundamental Research Funds for the Central Universities of China(Grant No.2017B14914),the Postdoctoral Science Foundation of China(Grant No.2016M601586)the Science and Technology Project of Changzhou(Grant No.CJ20180048)Scientific Research Fund of Jiangxi Provincial Education Department(Grant Nos.GJJ150313,GJJ160273,and GJJ170184).
文摘Owing to the enormously enhanced oscillating wave,a minute variation of the incident light intensity will give rise to a change in the dielectric constant of the Kerr nonlinear medium and lead to a bistable reflection with an ultra-low threshold intensity,which is closely related to the angle of incidence and the thickness of the Kerr nonlinear medium.The criterion for the existence of optical bistability is derived.Our bistability scheme is simple and not limited to the TM-polarization.
基金UGC,New Delhi,India for awarding Maulana Azad National Fellowship(Grant No.F1-17.1/2015-16/MANF-2015-17-MAH-68193)RCAMSKing Khalid University,Saudi Arabia for support
文摘In the current investigation,L-proline cadmium chloride monohydrate（LPCC） single crystal is grown by a slow solvent evaporation technique to identify its credibility for nonlinear optical device applications.The constituent elements of LPCC crystal are determined by the energy dispersive spectroscopic（EDS） technique.The single crystal x-ray diffraction technique is used to determine the structural dimensions of LPCC crystal.The UV-visible studies are carried out within a wavelength range of 200 nm–1100 nm to determine the optical transmittance of LPCC crystal.The linear optical parameters of LPCC crystal are evaluated using the transmittance data to discuss its importance for distinct optical devices.The Nd：YAG laser assisted Kurtz–Perry test is carried out to determine the enhancement in second harmonic generation efficiency of LPCC crystal with reference to KDP crystal.The Z-scan technique is employed to assess the third order nonlinear optical（TONLO） properties of LPCC crystal at 632.8 nm.The Z-scan data are utilized to evaluate the TONLO refraction,absorption and susceptibility of LPCC crystal.The color oriented luminescence behavior of LPCC crystal is investigated within a spectral range of 350 nm–700 nm.The dependence of dielectric constant and dielectric loss on temperature and frequency is evaluated through the dielectric measurement studies.
