Objectives This study aimed to explore the lagged and cumulative effects of risk factors on disability in older adults using distributed lag non-linear models(DLNMs).Methods We utilized data from the China Health and ...Objectives This study aimed to explore the lagged and cumulative effects of risk factors on disability in older adults using distributed lag non-linear models(DLNMs).Methods We utilized data from the China Health and Retirement Longitudinal Study(CHARLS).After feature selection via Elastic Net Regularization,we applied DLNMs to evaluate the lagged effects of risk factors.Disability was defined as the presence of any difficulties in basic activities of daily living(BADL).The cumulative relative risk(CRR)was calculated by summing the lag-specific risk estimates,representing the cumulative disability risk over the specified lag period.Effect modifications and sensitivity analyses were also performed.Results This study included a total of 2,318 participants.Early-phase lag factors,such as the difficulty in stooping(CRR=3.58;95%CI:2.31-5.55;P<0.001)and walking(CRR=2.77;95%CI:1.39-5.55;P<0.001),exerted the strongest effects immediately upon occurrence.Mid-phase lag factors,such as arthritis(CRR=1.51;95%CI:1.10-2.06;P=0.001),showed a resurgence in disability risk within 2-3 years.Late-phase lag factors,including depressive symptoms(CRR=2.38;95%CI:1.30-4.35;P<0.001)and elevated systolic blood pressure(CRR=1.64;95%CI:1.06-2.79;P=0.02),exhibited significant long-term cumulative risks.Conversely,grip strength(CRR=0.80;95%CI:0.54-0.95;P=0.02)and social participation(CRR=0.89;95%CI:0.73-0.99;P=0.04)were significant protective factors.Conclusions The findings underscore the importance of tailored interventions that account for various lag characteristics of different factors to effectively mitigate disability risk.Future studies should explore the underlying biological and sociological mechanisms of these lagged effects,identify intervention strategies that target risk factors with different lagged patterns,and evaluate their effectiveness.展开更多
Advanced healthcare monitors for air pollution applications pose a significant challenge in achieving a balance between high-performance filtration and multifunctional smart integration.Electrospinning triboelectric n...Advanced healthcare monitors for air pollution applications pose a significant challenge in achieving a balance between high-performance filtration and multifunctional smart integration.Electrospinning triboelectric nanogenerators(TENG)provide a significant potential for use under such difficult circumstances.We have successfully constructed a high-performance TENG utilizing a novel multi-scale nanofiber architecture.Nylon 66(PA66)and chitosan quaternary ammonium salt(HACC)composites were prepared by electrospinning,and PA66/H multiscale nanofiber membranes composed of nanofibers(≈73 nm)and submicron-fibers(≈123 nm)were formed.PA66/H multi-scale nanofiber membrane as the positive electrode and negative electrode-spun PVDF-HFP nanofiber membrane composed of respiration-driven PVDF-HFP@PA66/H TENG.The resulting PVDF-HFP@PA66/H TENG based air filter utilizes electrostatic adsorption and physical interception mechanisms,achieving PM_(0.3)filtration efficiency over 99%with a pressure drop of only 48 Pa.Besides,PVDF-HFP@PA66/H TENG exhibits excellent stability in high-humidity environments,with filtration efficiency reduced by less than 1%.At the same time,the TENG achieves periodic contact separation through breathing drive to achieve self-power,which can ensure the long-term stability of the filtration efficiency.In addition to the air filtration function,TENG can also monitor health in real time by capturing human breathing signals without external power supply.This integrated system combines high-efficiency air filtration,self-powered operation,and health monitoring,presenting an innovative solution for air purification,smart protective equipment,and portable health monitoring.These findings highlight the potential of this technology for diverse applications,offering a promising direction for advancing multifunctional air filtration systems.展开更多
BACKGROUND With an increase in the elderly population,the frequency of hospitalizations in recent years has also risen at a rapid pace.This,in turn,has resulted in poor outcomes and costly treatments.Hospitalization r...BACKGROUND With an increase in the elderly population,the frequency of hospitalizations in recent years has also risen at a rapid pace.This,in turn,has resulted in poor outcomes and costly treatments.Hospitalization rates increase in elderly patients due to a decline in glomerular filtration rate(GFR).AIM To investigate the connection between GFR and comorbidity and reasons for hospitalization in elderly patients.METHODS We analyzed patients aged 75 years and over who were admitted to the internal medicine clinic of a tertiary hospital in Eskisehir.At admission,we calculated GFR values using the Modification of Diet in Renal Disease study formula and classified them into six categories:G1,G2,G3a,G3b,G4,and G5.We analyzed associations with hospitalization diagnoses and comorbidity factors.RESULTS The average age of the patients was 80.8 years(±4.5 years).GFR was 57.287±29.5 mL/kg/1.73 m2 in women and 61.3±31.5 mL/kg/1.73 m2 in men(P=0.106).Most patients were admitted to the hospital at G2 stage(32.8%).The main reasons for hospitalization were anemia(34.4%and 28.6%)and malnutrition(20.9%and 20.8%)in women and men,respectively(P=0.078).The most frequent comor-bidity leading to hospitalization was arterial hypertension(n=168,28%),fo-llowed by diabetes(n=166,27.7%)(P=0.001).CONCLUSION When evaluating geriatric patients,low GFR alone does not provide sufficient information.Patients’comorbid factors should also be taken into account.There is no association between low GFR during hospitalization and hospitalization-Hamarat H.Aging and GFR related diagnoses.Knowing the GFR value before hospitalization will be more informative in such studies.展开更多
The mechanism of hydrate-based desalination is that water molecules would transfer to the hydrate phase during gas hydrate formation process,while the salt ions would be conversely concentrated in the unreacted saltwa...The mechanism of hydrate-based desalination is that water molecules would transfer to the hydrate phase during gas hydrate formation process,while the salt ions would be conversely concentrated in the unreacted saltwater.However,the salt concentration of hydrate decomposed water and the desalination degree of hydrate phase are still unclear.The biggest challenge is how to effectively separate the hydrate phase and the remaining unreacted salt water,and then decompose the hydrate phase to measure the salt concentration of hydrate melt water.This work developed an apparatus and pressure-driven filtration method to efficiently separate the hydrate phase and the remaining unreacted saltwater.On this basis,the single hydrate phase was obtained,then it was dissociated and the salt concentration of hydrate melt water was measured.The experimental results demonstrate that when the initial salt mass concentration is 0.3% to 8.0%,the salt removal efficiency for NaCl solution is 15.9% to 29.8%by forming CO_(2) hydrate,while for CaCl_(2) solution is 28.9%to 45.5%.The solute CaCl_(2) is easier to be removed than solute NaCl.In addition,the salt removal efficiency for forming CO_(2) hydrate is higher than that for forming methane hydrate.The multi-stage desalination can continuously decrease the salt concentration of hydrate dissociated water,and the salt removal efficiency per stage is around 20%.展开更多
Glaucoma filtration surgery(GFS)stands as the most effective intervention for reducing intraocular pressure,a critical component in glaucoma management.Despite its pivotal role,the scarring of the filtration bleb rema...Glaucoma filtration surgery(GFS)stands as the most effective intervention for reducing intraocular pressure,a critical component in glaucoma management.Despite its pivotal role,the scarring of the filtration bleb remains the primary impediment to successful GFS outcomes.Perioperative utilization of antimitotics,while frontline in combating fibrosis and modulating the wound healing process,carries the risk of vision-threatening complications.Given the complexity of the wound healing cascade and the potential insufficiency of targeting a single molecule,there is an imperative to expand therapeutic modalities through combination therapies.This review offers a comprehensive elucidation of the fibrogenesis post-GFS,a synthesis unprecedented in the available literature,and aims to inform the broadening of therapeutic strategies for GFS.展开更多
Granular bed filter is one of the most promising technologies for the dust removal from high temperature coal pyrolysis gas.In this work,three-dimensional numerical models were employed to investigate the influence of...Granular bed filter is one of the most promising technologies for the dust removal from high temperature coal pyrolysis gas.In this work,three-dimensional numerical models were employed to investigate the influence of operation parameters on collection efficiency,especially paying attention to particle deposition characteristics in the bed and outlet particle size distribution.The results show that the operation parameters have different effects on the collection efficiency of particles with the different properties.Under the same conditions,the collection efficiency of granular bed for circulating ash increases more rapidly compared to that of char particles.According to the effective Stokes number(N_(steff)),the collection efficiency of granular bed can be obviously divided into three regions:difficult separation region(N_(steff)≤0.25),transition region(0.25<N_(steff)<0.83)and easy separation region(N_(steff)≥0.83).Dust deposition within the bed exhibits axial attenuation along the gas flow direction,allowing classification of deposited particles into two characteristic types:dispersed particles and congregated particles.In addition,granular bed filtration induces a morphological transition of particle size distribution,transforming the original monomodal profile into a well-defined bimodal structure.A correlation formula of the collection efficiency was developed,providing critical insights for the engineering design of granular bed filters.展开更多
A gravity-driven membrane(GDM)system is a cleaning-free ultrafiltration(UF)process for decentralized water purification.However,GDM has a poor permeate quality and low stable flux when the feed water contains high lev...A gravity-driven membrane(GDM)system is a cleaning-free ultrafiltration(UF)process for decentralized water purification.However,GDM has a poor permeate quality and low stable flux when the feed water contains high levels of particulates,organic matter,and micropollutants.To address these challenges,this study used riverbank filtration(BF)as a pretreatment for GDM.The experimental results showed that BF could effectively reduce turbidity and particulate organic matter,and preferentially remove biopolymers and protein-like fluorescent components from natural organic matter.The removal efficiencies of micropollutants(diclofenac,carbamazepine,acetamidophenol,and bisphenol A)increased by 15.2%-65.3% in the presence of BF.Moreover,BF-GDM improved the removal of assimilable organic carbon(AOC)by 42%,thereby enhancing the biological stability of the permeate.Despite a modest increase of approximately 20%in the removal of dissolved organic matter,the BF significantly improved the stable flux from 2.8 to 7.3 L·m^(-2)·h^(-1).This remarkable improvement is attributed to the effective removal of key foulants,including particulate substances,biopolymers,and protein-like fluorescent substances,which leads to a thinner bio-cake layer with a higher density of microorganisms.Additionally,because of the high microbial diversity of the soil,BF pretreatment enriched the microbial diversity of the biocake layer,thereby enriching functional microorganisms capable of degrading pollutants in BF-GDM,such as Nitrospirota and Ascomycota.Overall,BF is a highly effective pretreatment for GDM,which potentially broadens its application to polluted source water.展开更多
This opinion article discusses the original research work of Yünkül et al.(the Authors)published in the Journal of Mountain Science 21(9):3108–3122.Employing non-linear regression,fuzzy logic and artificial...This opinion article discusses the original research work of Yünkül et al.(the Authors)published in the Journal of Mountain Science 21(9):3108–3122.Employing non-linear regression,fuzzy logic and artificial neural network modeling techniques,the Authors interrogated a large database assembled from the existing research literature to assess the performance of twelve equation rules in predicting the undrained shear strength(s_(u))mobilized for remolded fine-grained soils at different values of liquidity index(I_(L))and water content ratio.Based on their analyses,the Authors proposed a simple and reportedly reliable correlation(i.e.,Eq.9 in their paper)for predicting s_(u) over the I_(L) range of 0.15 to 3.00.This article describes various shortcomings in the Authors’assembled database(including potentially anomalous data and covering an excessively wide I_(L) range in relation to routine geotechnical and transportation engineering applications)and their proposed s_(u)=f(I_(L))correlation.Contrary to the Authors’assertions,their proposed correlation is not reliable for fine-grained soils with consistencies in the general firm to stiff range(i.e.,for 0.15<I_(L)<0.40),increasingly overestimating s_(u) for reducing I_(L),and eventually predicting s_(u)→+∞for I_(L)→0.15+(while producing mathematically undefined s_(u) for I_(L)<0.15),thus rendering their correlation unconservative and potentially leading to unsafe geotechnical designs.Exponential or regular-power type s_(u)=f(I_(L))models are more s_(u)itable when developing correlations that are applicable over the full plastic range(of 0<I_(L)<1),thereby providing reasonably conservative s_(u) predictions for use in the preliminary design for routine geotechnical engineering applications.展开更多
As the global exploration and development of oil and gas resources advances into deep formations,the harsh conditions of high temperature and high salinity present significant challenges for drilling fluids.In order t...As the global exploration and development of oil and gas resources advances into deep formations,the harsh conditions of high temperature and high salinity present significant challenges for drilling fluids.In order to address the technical difficulties associated with the failure of filtrate loss reducers under high-temperature and high-salinity conditions.In this study,a hydrophobic zwitterionic filtrate loss reducer(PDA)was synthesized based on N,N-dimethylacrylamide(DMAA),2-acrylamido-2-methylpropane sulfonic acid(AMPS),diallyl dimethyl ammonium chloride(DMDAAC),styrene(ST)and a specialty vinyl monomer(A1).When the concentration of PDA was 3%,the FLAPI of PDA-WBDF was 9.8 mL and the FLHTHP(180℃,3.5 MPa)was 37.8 mL after aging at 240℃for 16 h.In the saturated NaCl environment,the FLAPI of PDA-SWBDF was 4.0 mL and the FLHTHP(180℃,3.5 MPa)was 32.0 mL after aging at 220℃ for 16 h.Under high-temperature and high-salinity conditions,the combined effect of anti-polyelectrolyte and hydrophobic association allowed PDA to adsorb on the bentonite surface tightly.The sulfonic acid groups of PDA increased the negative electronegativity and the hydration film thickness on bentonite surface,which enhanced the colloidal stability,maintained the flattened lamellar structure of bentonite and formed an appropriate particle size distribution,resulting in the formation of dense mud cakes and reducing the filtration loss effectively.展开更多
Many experiments have supported the contact models,such as the GW and MB models,but the majority of previous validations have been performed under light loads,resulting in a linear relationship between normal force an...Many experiments have supported the contact models,such as the GW and MB models,but the majority of previous validations have been performed under light loads,resulting in a linear relationship between normal force and contact area.However,the real contact area fraction should never equal one;there must be a limit smaller than the apparent area,implying that the real contact area cannot increase linearly indefinitely.In this paper,the real contact area between two polymethylmethacrylate(PMMA)blocks under heavy load is measured using the total reflection method,and the contact area is analyzed using the image processing method.The results show that the real contact area increases with normal load linearly in light loads but non-linearly in heavy loads;the number of contact spots increases with load linearly in light loads but also non-linearly in heavy loads,synchronous with the change in the real contact area.The GW,MB,and Zhao,Maietta,and Chang(ZMC)models were used to predict the experiment results,but none of them predicted the non-linear stage.A revised GW model based on the bulk deformation hypothesis performs better in predicting the non-linear stage.The study’s findings can be applied to PMMA or other similar materials,and they can serve as a useful reference for future research on the contact mechanisms of other materials.展开更多
In this paper,we study the self-similar solutions of the degenerate diffusion equation ut-div(|▽u^(m)|^(p-2)▽u^(m))=0 of polytropic filtration diffusion in R^(N)×(0,±∞)or(R^(N)/{0})×(0,±∞)with ...In this paper,we study the self-similar solutions of the degenerate diffusion equation ut-div(|▽u^(m)|^(p-2)▽u^(m))=0 of polytropic filtration diffusion in R^(N)×(0,±∞)or(R^(N)/{0})×(0,±∞)with N≥1,m>0,p>1,such that m(p-1)>1.We give a clear classification of the self-similar solutions of the form u(x,t)=(βt)^(-α/β)((βt)^(-1/β)|x|)withα∈R andβ=α[m(p-1)-1]+p,regular or singular at the origin point.The existence and uniqueness of some solutions are established by the phase plane analysis method,and the asymptotic properties of the solutions near the origin and the infinity are also described.This paper extends the classical results of self-similar solutions for degeneratep-Laplace heat equation by Bidaut-Véron[Proc Royal Soc Edinburgh,2009,139:1-43]to the doubly nonlinear degenerate diffusion equations.展开更多
For cone beam computed tomography(CBCT),there has long been a desire to modulate the intensity and distribution of the X-rays to accommodate the patient’s anatomy as the gantry rotates from one projection to another....For cone beam computed tomography(CBCT),there has long been a desire to modulate the intensity and distribution of the X-rays to accommodate the patient’s anatomy as the gantry rotates from one projection to another.This would reduce both image artifacts and radiation dose.However,the current beam modulation setups,such as dynamic bowtie filters,may be too complex for practical use in clinical applications.This study aimed to investigate a simplified dynamic beam filtration strategy for CBCT imaging to reduce image artifacts and radiation dose.In this study,the beam filtration was designed to vary dynamically as the CBCT gantry rotates around the object.Specifically,two distinct components were integrated:the sheet filter part and the bowtie filter part.The dynamic beam filtration setup has two working schemes,one is a combination of dynamic sheet filter and dynamic bowtie filter,denoted as dynamic filterdynamic bowtie(DFDB);the other is a combination of dynamic sheet filter and static bowtie filter,denoted as dynamic filter-static bowtie(DFSB).Numerical imaging experiments were performed for three human body parts:the shoulder,chest,and knee.In addition,the Monte Carlo simulation platform MC-GPU was used to generate the dose distribution maps.Results showed that the proposed DFDB and DFSB beam filtration schemes can significantly reduce the image artifacts and thus improve the CBCT image quality.Depending on the scanned object,the total radiation dose could be reduced by 30%.The proposed simple dynamic beam filtration strategy,especially the DFSB approach,could be beneficial in the future to improve the CBCT image quality with reduced image artifacts and radiation dose.展开更多
Organisms have evolved a strain limiting mechanism,reflected as a non-linear elastic constitutive,to prevent large deformations from threatening soft tissue integrity.Compared with linear elastic substrates,the wrinkl...Organisms have evolved a strain limiting mechanism,reflected as a non-linear elastic constitutive,to prevent large deformations from threatening soft tissue integrity.Compared with linear elastic substrates,the wrinkle of films on non-linear elastic substrates has received less attention.In this article,a unique wrinkle evolution of the film-substrate system with a J-shaped non-linear stress-strain relation is reported.The result shows that a concave hexagonal array pattern is formed with the shrinkage strain of the film-substrate systems developing.As the interconnection of hexagonal arrays,a unit cell ridge network appears with properties such as chirality and helix.The subparagraph maze pattern formed with high compression is mainly composed of special single-cell ridge networks such as spiral single cores,chiral double cores,and combined multi-cores.This evolutionary model is highly consistent with the results of experiments,and it also predicts wrinkle morphology that has not yet been reported.These findings can serve as a novel explanation for the surface wrinkle of biological soft tissue,as well as provide references for the preparation of artificial biomaterials and programmable soft matter.展开更多
During the production processes of energy,metallurgy,chemical engineering,and other process industries,substantial high-temperature dustladen flue gas is generated.Asymmetric silicon carbide(SiC)membranes exhibit sign...During the production processes of energy,metallurgy,chemical engineering,and other process industries,substantial high-temperature dustladen flue gas is generated.Asymmetric silicon carbide(SiC)membranes exhibit significant potential in flue gas filtration since they enable direct filtration of high-temperature gas and facilitate thermal energy recovery.However,membrane particle penetration is a prevalent issue when constructing membrane layer directly on macroporous support,which contributes to a considerable mass transfer resistance.Herein,a novel hydrophobic modification strategy was developed to avoid the slurry penetration,thereby fabricating the asymmetric SiC membrane without the necessity of any intermediate or sacrificial layer.Firstly,the modifier concentration was adjusted to guarantee that the support was hydrophobic enough to prevent the slurry from penetrating.Subsequently,the slurry surface tension was fine-tuned by introducing ethanol to enhance the integrity of the SiC membrane.Furthermore,the effect of solid content was systematically investigated.It was demonstrated that the optimized SiC membranes obtained excellent gas permeance from 100.8 to 199.8 m^(3)·m^(-2)·h^(-1)·kPa^(-1)with the pore size ranging from 1.93 to 3.89μm.Also,the SiC membrane exhibited excellent stability for 24 h and achieved an excellent dust removal efficiency(99.99%)when filtering ultrafine dust particles(~300 nm)under high temperatures.This method effectively bridges the membrane particle penetration issue caused by the particle size disparity among different layers of the asymmetric membrane,establishing an efficient strategy to fabricate highpermeance SiC membranes applied in high-temperature dust-laden gas filtration.展开更多
Pure magnesia filter and periclase-spinel filter were prepared using porous MgO powder and Al2O3 micro-powder as raw materials.The filtration efficiency and purification mechanism of the two sets of filters on molten ...Pure magnesia filter and periclase-spinel filter were prepared using porous MgO powder and Al2O3 micro-powder as raw materials.The filtration efficiency and purification mechanism of the two sets of filters on molten steel were investigated through steel casting tests.The results show that on the basis of surviving the thermal shock of molten steel,both filters can significantly reduce the number of non-metallic inclusions and total oxygen content of steel,thereby improving the cleanliness of the molten steel.After the thermal shock of molten steel,cracks were found in the microstructure of pure magnesia filter.Via the diffusion of non-metallic inclusions from steel into MgO grains of the filter to form solid solution,the inclusions were adsorbed to the internal and external surfaces of the pure magnesia filter.The number of inclusions was reduced by 62.5%,and the total oxygen content decreased from 0.892 to 0.265 wt.%after filtration,achieving a filtration efficiency of 70.3%.Compared with the pure magnesia filter,no cracks were found in the microstructure of the periclase-spinel filter.The mass transfer rate was accelerated due to the diffusion of inclusions from steel into MgO and MgAl2O4 grains of the filter,as well as the higher high-temperature liquid content and smaller pore structure of the filter.More non-metallic inclusions were able to enter the interior of the filter,which made the periclase-spinel filter more capable of adsorbing inclusions from steel and reducing total oxygen content.The periclase-spinel filter reduced the number of inclusions in steel by 84.4%and decreased the total oxygen content of the steel from 0.892 to 0.119 wt.%,with a filtration efficiency of 86.7%,demonstrating excellent comprehensive performance.展开更多
The increasing severity of air pollution necessitates more effective and sustained air filtration technology.Concurrently,the desire for more environmentally friendly,sustainable materials with better filtering perfor...The increasing severity of air pollution necessitates more effective and sustained air filtration technology.Concurrently,the desire for more environmentally friendly,sustainable materials with better filtering performance and less environmental impact drives the move away from conventional synthetic membranes.This review presents lignocellulosic biocomposite(LigBioComp)membranes as an alternative to traditional synthetic membranes.It focuses on their materials,fabrication,and functionalization techniques while exploring challenges and proposing methods for resourceful utilization.Renowned for their abundance and renewable nature,lignocellulosic materials consist of cellulose,hemicellulose,and lignin.Various applications can benefit from their antibacterial properties,large surface area,and remarkable mechanical strength.LigBioComp membranes are fabricated through casting,electrospinning,and freeze-drying,with advancements in fabrication techniques enhancing their performance and applicability.It is suggested to use solvent-free or low-solvent techniques such as Layer-by-Layer assembly to minimize environmental impact.Freeze-drying and electrospinning with green solvents can be used for achieving specific membrane properties,though energy consumption should be considered.Apply dry-wet spinning and solvent casting processes selectively.Functional groups,including carboxyl,hydroxyl,or amino groups,can significantly improve the membrane’s capacity to capture particulate matter.Chemical etching or the precise deposition of nanoparticles can further optimize pore size and distribution.The choice of chemicals and methods is critical in functionalization,with silane coupling agents,polyethyleneimine,and polydopamine.Future research should prioritize refining fabrication methods,advancing functionalization strategies,and conducting performance and recyclability assessments on hybrid and composite materials.This will enhance integrated systems and contribute to the development of smart filters.展开更多
AIM:To develop a 5-fluorouracil(5-FU)mesoporous poly(lactic)acid(PLA)delivery system for glaucoma filtration surgery suitable for a single subconjunctival implantation.METHODS:The 5-FU was infiltration-loaded into mes...AIM:To develop a 5-fluorouracil(5-FU)mesoporous poly(lactic)acid(PLA)delivery system for glaucoma filtration surgery suitable for a single subconjunctival implantation.METHODS:The 5-FU was infiltration-loaded into mesoporous PLA.In vitro and in vivo release experiments and ocular toxicology evaluation of the formulation were performed.The antiproliferative effect of this 5-FU-PLA tablet after glaucoma filtration surgery in rabbits was evaluated.Pathology,immunohistochemistry,and Western blot were used to further validate the inhibitory effect of this sustained release system.RESULTS:Various drug formulations were tested,and two 5-FU-PLA tablets,namely 1.5P15(5-FU 1.5 mg+PLA 15000 Da)and 2.5P15(5-FU 2.5 mg+PLA 15000 Da),had the most suitable release profiles in vitro.Further in vivo studies confirmed the safety and sustained-release profiles of both drugs.Both 5-FU-PLA tablets,relative to the free drugs,significantly inhibited tissue proliferation after glaucoma filtration and improved surgical success.Western blot showed that transforming growth factor-β(TGF-β)and connective tissue growth factor(CTGF)were inhibited by 5-FU after filtration surgery,with the effects of the 5-FU-PLA tablets being more lasting.CONCLUSION:The tested 5-FU-PLA tablets provide a sustained release of 5-FU,which may be used for a single subconjunctival implantation to inhibit proliferation after filtration surgery.展开更多
Aimed at the doubly near-far problems in a large range suffered by the remote user group and in a small range existing in both nearby and remote user groups during energy harvesting and computation offloading,a resour...Aimed at the doubly near-far problems in a large range suffered by the remote user group and in a small range existing in both nearby and remote user groups during energy harvesting and computation offloading,a resource allocation method for unmanned aerial vehicle(UAV)-assisted and user cooperation non-linear energy harvesting mobile edge computing(MEC)system is proposed.The UAV equipped with an MEC server is introduced to provide energy and computing services for the remote user group to alleviate the doubly near-far problem in a large range suffered by the remote user group.The doubly near-far problem in a small range existing in both nearby and remote user groups is mitigated by user cooperation.The specific user cooperation strategy is that the user near the base station or the UAV is used as a relay to transfer the computing task of the user far from the base station or the UAV to the MEC server for computing.By jointly optimizing users’offloading time,users’transmitting power,and the hovering position of the UAV,the resource allocation problem is modeled as a nonlinear programming problem with the objective of maximizing computation efficiency.The suboptimal solution is obtained by adopting the differential evolution algorithm.Simulation results show that,compared with the resource allocation method based on genetic algorithm and the without user cooperation method,the proposed method has higher computation efficiency.展开更多
Photocatalytic membranes hold significant potential for promoting pollutant degradation and reducing membrane fouling in filtration systems.Although extensive research has been conducted on the independent design of p...Photocatalytic membranes hold significant potential for promoting pollutant degradation and reducing membrane fouling in filtration systems.Although extensive research has been conducted on the independent design of photocatalysts or membrane materials to improve their catalytic and filtration performance,the complex structures and interface mechanisms,as well as insufficient light utilization,are still often overlooked,limiting the overall performance improvement of photocatalytic membranes.This work provides an overview of enhancement strategies involving restricted area effects,external fields,such as mechanical,magnetic,thermal,and electrical fields,as well as coupling techniques with advanced oxidation processes(e.g.,O_(3),Fenton,and persulfate oxidation)for dual enhancement of photocatalysts and membranes.In addition,the synthesis method of photocatalytic membranes and the influence of factors,such as light source type,frequency,and relative position on photocatalytic membrane performance were also studied.Finally,economic feasibility and pollutant removal performance were further evaluated to determine the promising enhancement strategies,paving the way for more efficient and scalable applications of photocatalytic membranes.展开更多
基金supported by ScientificResearch Fund of National Health Commission of the People’s Republic of China-Major Science and Technology Program for Medicine and Health in Zhejiang Province(WKJ-ZJ-2406).
文摘Objectives This study aimed to explore the lagged and cumulative effects of risk factors on disability in older adults using distributed lag non-linear models(DLNMs).Methods We utilized data from the China Health and Retirement Longitudinal Study(CHARLS).After feature selection via Elastic Net Regularization,we applied DLNMs to evaluate the lagged effects of risk factors.Disability was defined as the presence of any difficulties in basic activities of daily living(BADL).The cumulative relative risk(CRR)was calculated by summing the lag-specific risk estimates,representing the cumulative disability risk over the specified lag period.Effect modifications and sensitivity analyses were also performed.Results This study included a total of 2,318 participants.Early-phase lag factors,such as the difficulty in stooping(CRR=3.58;95%CI:2.31-5.55;P<0.001)and walking(CRR=2.77;95%CI:1.39-5.55;P<0.001),exerted the strongest effects immediately upon occurrence.Mid-phase lag factors,such as arthritis(CRR=1.51;95%CI:1.10-2.06;P=0.001),showed a resurgence in disability risk within 2-3 years.Late-phase lag factors,including depressive symptoms(CRR=2.38;95%CI:1.30-4.35;P<0.001)and elevated systolic blood pressure(CRR=1.64;95%CI:1.06-2.79;P=0.02),exhibited significant long-term cumulative risks.Conversely,grip strength(CRR=0.80;95%CI:0.54-0.95;P=0.02)and social participation(CRR=0.89;95%CI:0.73-0.99;P=0.04)were significant protective factors.Conclusions The findings underscore the importance of tailored interventions that account for various lag characteristics of different factors to effectively mitigate disability risk.Future studies should explore the underlying biological and sociological mechanisms of these lagged effects,identify intervention strategies that target risk factors with different lagged patterns,and evaluate their effectiveness.
基金financial support from the National Key Research and Development Program of China(2022YFB3804905)National Natural Science Foundation of China(22375047,22378068,and 22378071)+1 种基金Natural Science Foundation of Fujian Province(2022J01568)111 Project(No.D17005).
文摘Advanced healthcare monitors for air pollution applications pose a significant challenge in achieving a balance between high-performance filtration and multifunctional smart integration.Electrospinning triboelectric nanogenerators(TENG)provide a significant potential for use under such difficult circumstances.We have successfully constructed a high-performance TENG utilizing a novel multi-scale nanofiber architecture.Nylon 66(PA66)and chitosan quaternary ammonium salt(HACC)composites were prepared by electrospinning,and PA66/H multiscale nanofiber membranes composed of nanofibers(≈73 nm)and submicron-fibers(≈123 nm)were formed.PA66/H multi-scale nanofiber membrane as the positive electrode and negative electrode-spun PVDF-HFP nanofiber membrane composed of respiration-driven PVDF-HFP@PA66/H TENG.The resulting PVDF-HFP@PA66/H TENG based air filter utilizes electrostatic adsorption and physical interception mechanisms,achieving PM_(0.3)filtration efficiency over 99%with a pressure drop of only 48 Pa.Besides,PVDF-HFP@PA66/H TENG exhibits excellent stability in high-humidity environments,with filtration efficiency reduced by less than 1%.At the same time,the TENG achieves periodic contact separation through breathing drive to achieve self-power,which can ensure the long-term stability of the filtration efficiency.In addition to the air filtration function,TENG can also monitor health in real time by capturing human breathing signals without external power supply.This integrated system combines high-efficiency air filtration,self-powered operation,and health monitoring,presenting an innovative solution for air purification,smart protective equipment,and portable health monitoring.These findings highlight the potential of this technology for diverse applications,offering a promising direction for advancing multifunctional air filtration systems.
文摘BACKGROUND With an increase in the elderly population,the frequency of hospitalizations in recent years has also risen at a rapid pace.This,in turn,has resulted in poor outcomes and costly treatments.Hospitalization rates increase in elderly patients due to a decline in glomerular filtration rate(GFR).AIM To investigate the connection between GFR and comorbidity and reasons for hospitalization in elderly patients.METHODS We analyzed patients aged 75 years and over who were admitted to the internal medicine clinic of a tertiary hospital in Eskisehir.At admission,we calculated GFR values using the Modification of Diet in Renal Disease study formula and classified them into six categories:G1,G2,G3a,G3b,G4,and G5.We analyzed associations with hospitalization diagnoses and comorbidity factors.RESULTS The average age of the patients was 80.8 years(±4.5 years).GFR was 57.287±29.5 mL/kg/1.73 m2 in women and 61.3±31.5 mL/kg/1.73 m2 in men(P=0.106).Most patients were admitted to the hospital at G2 stage(32.8%).The main reasons for hospitalization were anemia(34.4%and 28.6%)and malnutrition(20.9%and 20.8%)in women and men,respectively(P=0.078).The most frequent comor-bidity leading to hospitalization was arterial hypertension(n=168,28%),fo-llowed by diabetes(n=166,27.7%)(P=0.001).CONCLUSION When evaluating geriatric patients,low GFR alone does not provide sufficient information.Patients’comorbid factors should also be taken into account.There is no association between low GFR during hospitalization and hospitalization-Hamarat H.Aging and GFR related diagnoses.Knowing the GFR value before hospitalization will be more informative in such studies.
基金The financial support from the National Natural Science Foundation of China(22127812,22278433,22178379)the National Key Research and Development Program of China(2021YFC2800902)are gratefully acknowledged。
文摘The mechanism of hydrate-based desalination is that water molecules would transfer to the hydrate phase during gas hydrate formation process,while the salt ions would be conversely concentrated in the unreacted saltwater.However,the salt concentration of hydrate decomposed water and the desalination degree of hydrate phase are still unclear.The biggest challenge is how to effectively separate the hydrate phase and the remaining unreacted salt water,and then decompose the hydrate phase to measure the salt concentration of hydrate melt water.This work developed an apparatus and pressure-driven filtration method to efficiently separate the hydrate phase and the remaining unreacted saltwater.On this basis,the single hydrate phase was obtained,then it was dissociated and the salt concentration of hydrate melt water was measured.The experimental results demonstrate that when the initial salt mass concentration is 0.3% to 8.0%,the salt removal efficiency for NaCl solution is 15.9% to 29.8%by forming CO_(2) hydrate,while for CaCl_(2) solution is 28.9%to 45.5%.The solute CaCl_(2) is easier to be removed than solute NaCl.In addition,the salt removal efficiency for forming CO_(2) hydrate is higher than that for forming methane hydrate.The multi-stage desalination can continuously decrease the salt concentration of hydrate dissociated water,and the salt removal efficiency per stage is around 20%.
基金Supported by Hospital Level Project of the Eye Hospital of China Academy of Chinese Medical Sciences(No.GSP5-40)Internal Project of the Eye Hospital of China Academy of Chinese Medical Sciences(No.1011632).
文摘Glaucoma filtration surgery(GFS)stands as the most effective intervention for reducing intraocular pressure,a critical component in glaucoma management.Despite its pivotal role,the scarring of the filtration bleb remains the primary impediment to successful GFS outcomes.Perioperative utilization of antimitotics,while frontline in combating fibrosis and modulating the wound healing process,carries the risk of vision-threatening complications.Given the complexity of the wound healing cascade and the potential insufficiency of targeting a single molecule,there is an imperative to expand therapeutic modalities through combination therapies.This review offers a comprehensive elucidation of the fibrogenesis post-GFS,a synthesis unprecedented in the available literature,and aims to inform the broadening of therapeutic strategies for GFS.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA29020400)the National Key Research and Development Program of China(2018YFB0605003)financial support from the Science and Technology Program of Yan'an(2023SLGYGG-001)。
文摘Granular bed filter is one of the most promising technologies for the dust removal from high temperature coal pyrolysis gas.In this work,three-dimensional numerical models were employed to investigate the influence of operation parameters on collection efficiency,especially paying attention to particle deposition characteristics in the bed and outlet particle size distribution.The results show that the operation parameters have different effects on the collection efficiency of particles with the different properties.Under the same conditions,the collection efficiency of granular bed for circulating ash increases more rapidly compared to that of char particles.According to the effective Stokes number(N_(steff)),the collection efficiency of granular bed can be obviously divided into three regions:difficult separation region(N_(steff)≤0.25),transition region(0.25<N_(steff)<0.83)and easy separation region(N_(steff)≥0.83).Dust deposition within the bed exhibits axial attenuation along the gas flow direction,allowing classification of deposited particles into two characteristic types:dispersed particles and congregated particles.In addition,granular bed filtration induces a morphological transition of particle size distribution,transforming the original monomodal profile into a well-defined bimodal structure.A correlation formula of the collection efficiency was developed,providing critical insights for the engineering design of granular bed filters.
基金supported by the National Natural Science Foundation of China(52270077 and 52070147)。
文摘A gravity-driven membrane(GDM)system is a cleaning-free ultrafiltration(UF)process for decentralized water purification.However,GDM has a poor permeate quality and low stable flux when the feed water contains high levels of particulates,organic matter,and micropollutants.To address these challenges,this study used riverbank filtration(BF)as a pretreatment for GDM.The experimental results showed that BF could effectively reduce turbidity and particulate organic matter,and preferentially remove biopolymers and protein-like fluorescent components from natural organic matter.The removal efficiencies of micropollutants(diclofenac,carbamazepine,acetamidophenol,and bisphenol A)increased by 15.2%-65.3% in the presence of BF.Moreover,BF-GDM improved the removal of assimilable organic carbon(AOC)by 42%,thereby enhancing the biological stability of the permeate.Despite a modest increase of approximately 20%in the removal of dissolved organic matter,the BF significantly improved the stable flux from 2.8 to 7.3 L·m^(-2)·h^(-1).This remarkable improvement is attributed to the effective removal of key foulants,including particulate substances,biopolymers,and protein-like fluorescent substances,which leads to a thinner bio-cake layer with a higher density of microorganisms.Additionally,because of the high microbial diversity of the soil,BF pretreatment enriched the microbial diversity of the biocake layer,thereby enriching functional microorganisms capable of degrading pollutants in BF-GDM,such as Nitrospirota and Ascomycota.Overall,BF is a highly effective pretreatment for GDM,which potentially broadens its application to polluted source water.
文摘This opinion article discusses the original research work of Yünkül et al.(the Authors)published in the Journal of Mountain Science 21(9):3108–3122.Employing non-linear regression,fuzzy logic and artificial neural network modeling techniques,the Authors interrogated a large database assembled from the existing research literature to assess the performance of twelve equation rules in predicting the undrained shear strength(s_(u))mobilized for remolded fine-grained soils at different values of liquidity index(I_(L))and water content ratio.Based on their analyses,the Authors proposed a simple and reportedly reliable correlation(i.e.,Eq.9 in their paper)for predicting s_(u) over the I_(L) range of 0.15 to 3.00.This article describes various shortcomings in the Authors’assembled database(including potentially anomalous data and covering an excessively wide I_(L) range in relation to routine geotechnical and transportation engineering applications)and their proposed s_(u)=f(I_(L))correlation.Contrary to the Authors’assertions,their proposed correlation is not reliable for fine-grained soils with consistencies in the general firm to stiff range(i.e.,for 0.15<I_(L)<0.40),increasingly overestimating s_(u) for reducing I_(L),and eventually predicting s_(u)→+∞for I_(L)→0.15+(while producing mathematically undefined s_(u) for I_(L)<0.15),thus rendering their correlation unconservative and potentially leading to unsafe geotechnical designs.Exponential or regular-power type s_(u)=f(I_(L))models are more s_(u)itable when developing correlations that are applicable over the full plastic range(of 0<I_(L)<1),thereby providing reasonably conservative s_(u) predictions for use in the preliminary design for routine geotechnical engineering applications.
基金supported by State Key Laboratory of Deep Oil and Gas(No.SKLDOG2024-ZYRC-03)supported by the Excellent Young Scientists Fund of the National Natural Science Foundation of China(No.52322401)the National Natural Science Foundation of China(52288101).
文摘As the global exploration and development of oil and gas resources advances into deep formations,the harsh conditions of high temperature and high salinity present significant challenges for drilling fluids.In order to address the technical difficulties associated with the failure of filtrate loss reducers under high-temperature and high-salinity conditions.In this study,a hydrophobic zwitterionic filtrate loss reducer(PDA)was synthesized based on N,N-dimethylacrylamide(DMAA),2-acrylamido-2-methylpropane sulfonic acid(AMPS),diallyl dimethyl ammonium chloride(DMDAAC),styrene(ST)and a specialty vinyl monomer(A1).When the concentration of PDA was 3%,the FLAPI of PDA-WBDF was 9.8 mL and the FLHTHP(180℃,3.5 MPa)was 37.8 mL after aging at 240℃for 16 h.In the saturated NaCl environment,the FLAPI of PDA-SWBDF was 4.0 mL and the FLHTHP(180℃,3.5 MPa)was 32.0 mL after aging at 220℃ for 16 h.Under high-temperature and high-salinity conditions,the combined effect of anti-polyelectrolyte and hydrophobic association allowed PDA to adsorb on the bentonite surface tightly.The sulfonic acid groups of PDA increased the negative electronegativity and the hydration film thickness on bentonite surface,which enhanced the colloidal stability,maintained the flattened lamellar structure of bentonite and formed an appropriate particle size distribution,resulting in the formation of dense mud cakes and reducing the filtration loss effectively.
基金Supported by National Natural Science Foundation of China(Grant No.11872033)Beijing Municipal Natural Science Foundation(Grant No.3172017)。
文摘Many experiments have supported the contact models,such as the GW and MB models,but the majority of previous validations have been performed under light loads,resulting in a linear relationship between normal force and contact area.However,the real contact area fraction should never equal one;there must be a limit smaller than the apparent area,implying that the real contact area cannot increase linearly indefinitely.In this paper,the real contact area between two polymethylmethacrylate(PMMA)blocks under heavy load is measured using the total reflection method,and the contact area is analyzed using the image processing method.The results show that the real contact area increases with normal load linearly in light loads but non-linearly in heavy loads;the number of contact spots increases with load linearly in light loads but also non-linearly in heavy loads,synchronous with the change in the real contact area.The GW,MB,and Zhao,Maietta,and Chang(ZMC)models were used to predict the experiment results,but none of them predicted the non-linear stage.A revised GW model based on the bulk deformation hypothesis performs better in predicting the non-linear stage.The study’s findings can be applied to PMMA or other similar materials,and they can serve as a useful reference for future research on the contact mechanisms of other materials.
基金supported by the NSFC(12271178,12171166)the Guangzhou Basic and Applied Basic Research Foundation(2024A04J2022)the TCL Young Scholar(2024-2027).
文摘In this paper,we study the self-similar solutions of the degenerate diffusion equation ut-div(|▽u^(m)|^(p-2)▽u^(m))=0 of polytropic filtration diffusion in R^(N)×(0,±∞)or(R^(N)/{0})×(0,±∞)with N≥1,m>0,p>1,such that m(p-1)>1.We give a clear classification of the self-similar solutions of the form u(x,t)=(βt)^(-α/β)((βt)^(-1/β)|x|)withα∈R andβ=α[m(p-1)-1]+p,regular or singular at the origin point.The existence and uniqueness of some solutions are established by the phase plane analysis method,and the asymptotic properties of the solutions near the origin and the infinity are also described.This paper extends the classical results of self-similar solutions for degeneratep-Laplace heat equation by Bidaut-Véron[Proc Royal Soc Edinburgh,2009,139:1-43]to the doubly nonlinear degenerate diffusion equations.
文摘For cone beam computed tomography(CBCT),there has long been a desire to modulate the intensity and distribution of the X-rays to accommodate the patient’s anatomy as the gantry rotates from one projection to another.This would reduce both image artifacts and radiation dose.However,the current beam modulation setups,such as dynamic bowtie filters,may be too complex for practical use in clinical applications.This study aimed to investigate a simplified dynamic beam filtration strategy for CBCT imaging to reduce image artifacts and radiation dose.In this study,the beam filtration was designed to vary dynamically as the CBCT gantry rotates around the object.Specifically,two distinct components were integrated:the sheet filter part and the bowtie filter part.The dynamic beam filtration setup has two working schemes,one is a combination of dynamic sheet filter and dynamic bowtie filter,denoted as dynamic filterdynamic bowtie(DFDB);the other is a combination of dynamic sheet filter and static bowtie filter,denoted as dynamic filter-static bowtie(DFSB).Numerical imaging experiments were performed for three human body parts:the shoulder,chest,and knee.In addition,the Monte Carlo simulation platform MC-GPU was used to generate the dose distribution maps.Results showed that the proposed DFDB and DFSB beam filtration schemes can significantly reduce the image artifacts and thus improve the CBCT image quality.Depending on the scanned object,the total radiation dose could be reduced by 30%.The proposed simple dynamic beam filtration strategy,especially the DFSB approach,could be beneficial in the future to improve the CBCT image quality with reduced image artifacts and radiation dose.
基金This work was supported by the Youth Project of Hunan Provincial Department of Education(Grant No.22B0334)the Bridge and Tunnel Engineering Innovation Project of Changsha University of Science&Technology(Grant No.11ZDXK11)and the Practical Innovation and Entrepreneurship Capacity Improvement Plan of Changsha University of Science and Technology(Grant No.CLSJCX23029).
文摘Organisms have evolved a strain limiting mechanism,reflected as a non-linear elastic constitutive,to prevent large deformations from threatening soft tissue integrity.Compared with linear elastic substrates,the wrinkle of films on non-linear elastic substrates has received less attention.In this article,a unique wrinkle evolution of the film-substrate system with a J-shaped non-linear stress-strain relation is reported.The result shows that a concave hexagonal array pattern is formed with the shrinkage strain of the film-substrate systems developing.As the interconnection of hexagonal arrays,a unit cell ridge network appears with properties such as chirality and helix.The subparagraph maze pattern formed with high compression is mainly composed of special single-cell ridge networks such as spiral single cores,chiral double cores,and combined multi-cores.This evolutionary model is highly consistent with the results of experiments,and it also predicts wrinkle morphology that has not yet been reported.These findings can serve as a novel explanation for the surface wrinkle of biological soft tissue,as well as provide references for the preparation of artificial biomaterials and programmable soft matter.
基金Financial support was provided by the National Natural Science Foundation of China(22325804,22578197)National Key Research and Development Project of China(2021YFB3801302,2022YFC3900300)+1 种基金Jiangsu Future Membrane Technology Innovation Center(No.BM2021804)Natural Science Foundation of Jiangsu Higher Education Institutions of China(No.25KJA530003).
文摘During the production processes of energy,metallurgy,chemical engineering,and other process industries,substantial high-temperature dustladen flue gas is generated.Asymmetric silicon carbide(SiC)membranes exhibit significant potential in flue gas filtration since they enable direct filtration of high-temperature gas and facilitate thermal energy recovery.However,membrane particle penetration is a prevalent issue when constructing membrane layer directly on macroporous support,which contributes to a considerable mass transfer resistance.Herein,a novel hydrophobic modification strategy was developed to avoid the slurry penetration,thereby fabricating the asymmetric SiC membrane without the necessity of any intermediate or sacrificial layer.Firstly,the modifier concentration was adjusted to guarantee that the support was hydrophobic enough to prevent the slurry from penetrating.Subsequently,the slurry surface tension was fine-tuned by introducing ethanol to enhance the integrity of the SiC membrane.Furthermore,the effect of solid content was systematically investigated.It was demonstrated that the optimized SiC membranes obtained excellent gas permeance from 100.8 to 199.8 m^(3)·m^(-2)·h^(-1)·kPa^(-1)with the pore size ranging from 1.93 to 3.89μm.Also,the SiC membrane exhibited excellent stability for 24 h and achieved an excellent dust removal efficiency(99.99%)when filtering ultrafine dust particles(~300 nm)under high temperatures.This method effectively bridges the membrane particle penetration issue caused by the particle size disparity among different layers of the asymmetric membrane,establishing an efficient strategy to fabricate highpermeance SiC membranes applied in high-temperature dust-laden gas filtration.
基金supported by the Key Project of the National Natural Science Foundation of China(Grant No.U21A2058 and U1860205)the Natural Science Funds of Hubei Province for Distinguished Young Scholars(Grant No.2020CFA088).
文摘Pure magnesia filter and periclase-spinel filter were prepared using porous MgO powder and Al2O3 micro-powder as raw materials.The filtration efficiency and purification mechanism of the two sets of filters on molten steel were investigated through steel casting tests.The results show that on the basis of surviving the thermal shock of molten steel,both filters can significantly reduce the number of non-metallic inclusions and total oxygen content of steel,thereby improving the cleanliness of the molten steel.After the thermal shock of molten steel,cracks were found in the microstructure of pure magnesia filter.Via the diffusion of non-metallic inclusions from steel into MgO grains of the filter to form solid solution,the inclusions were adsorbed to the internal and external surfaces of the pure magnesia filter.The number of inclusions was reduced by 62.5%,and the total oxygen content decreased from 0.892 to 0.265 wt.%after filtration,achieving a filtration efficiency of 70.3%.Compared with the pure magnesia filter,no cracks were found in the microstructure of the periclase-spinel filter.The mass transfer rate was accelerated due to the diffusion of inclusions from steel into MgO and MgAl2O4 grains of the filter,as well as the higher high-temperature liquid content and smaller pore structure of the filter.More non-metallic inclusions were able to enter the interior of the filter,which made the periclase-spinel filter more capable of adsorbing inclusions from steel and reducing total oxygen content.The periclase-spinel filter reduced the number of inclusions in steel by 84.4%and decreased the total oxygen content of the steel from 0.892 to 0.119 wt.%,with a filtration efficiency of 86.7%,demonstrating excellent comprehensive performance.
基金funded by the Universiti Teknologi Malaysia(UTM)through research Grant Number:06E05.
文摘The increasing severity of air pollution necessitates more effective and sustained air filtration technology.Concurrently,the desire for more environmentally friendly,sustainable materials with better filtering performance and less environmental impact drives the move away from conventional synthetic membranes.This review presents lignocellulosic biocomposite(LigBioComp)membranes as an alternative to traditional synthetic membranes.It focuses on their materials,fabrication,and functionalization techniques while exploring challenges and proposing methods for resourceful utilization.Renowned for their abundance and renewable nature,lignocellulosic materials consist of cellulose,hemicellulose,and lignin.Various applications can benefit from their antibacterial properties,large surface area,and remarkable mechanical strength.LigBioComp membranes are fabricated through casting,electrospinning,and freeze-drying,with advancements in fabrication techniques enhancing their performance and applicability.It is suggested to use solvent-free or low-solvent techniques such as Layer-by-Layer assembly to minimize environmental impact.Freeze-drying and electrospinning with green solvents can be used for achieving specific membrane properties,though energy consumption should be considered.Apply dry-wet spinning and solvent casting processes selectively.Functional groups,including carboxyl,hydroxyl,or amino groups,can significantly improve the membrane’s capacity to capture particulate matter.Chemical etching or the precise deposition of nanoparticles can further optimize pore size and distribution.The choice of chemicals and methods is critical in functionalization,with silane coupling agents,polyethyleneimine,and polydopamine.Future research should prioritize refining fabrication methods,advancing functionalization strategies,and conducting performance and recyclability assessments on hybrid and composite materials.This will enhance integrated systems and contribute to the development of smart filters.
基金Supported by the National Natural Science Foundation of China(No.82301211)Beijing Natural Science Foundation(No.J230028).
文摘AIM:To develop a 5-fluorouracil(5-FU)mesoporous poly(lactic)acid(PLA)delivery system for glaucoma filtration surgery suitable for a single subconjunctival implantation.METHODS:The 5-FU was infiltration-loaded into mesoporous PLA.In vitro and in vivo release experiments and ocular toxicology evaluation of the formulation were performed.The antiproliferative effect of this 5-FU-PLA tablet after glaucoma filtration surgery in rabbits was evaluated.Pathology,immunohistochemistry,and Western blot were used to further validate the inhibitory effect of this sustained release system.RESULTS:Various drug formulations were tested,and two 5-FU-PLA tablets,namely 1.5P15(5-FU 1.5 mg+PLA 15000 Da)and 2.5P15(5-FU 2.5 mg+PLA 15000 Da),had the most suitable release profiles in vitro.Further in vivo studies confirmed the safety and sustained-release profiles of both drugs.Both 5-FU-PLA tablets,relative to the free drugs,significantly inhibited tissue proliferation after glaucoma filtration and improved surgical success.Western blot showed that transforming growth factor-β(TGF-β)and connective tissue growth factor(CTGF)were inhibited by 5-FU after filtration surgery,with the effects of the 5-FU-PLA tablets being more lasting.CONCLUSION:The tested 5-FU-PLA tablets provide a sustained release of 5-FU,which may be used for a single subconjunctival implantation to inhibit proliferation after filtration surgery.
基金the National Natural Science Foundation of China(No.61871133)the Natural Science Foundation of Fujian Province(No.2021J01587)。
文摘Aimed at the doubly near-far problems in a large range suffered by the remote user group and in a small range existing in both nearby and remote user groups during energy harvesting and computation offloading,a resource allocation method for unmanned aerial vehicle(UAV)-assisted and user cooperation non-linear energy harvesting mobile edge computing(MEC)system is proposed.The UAV equipped with an MEC server is introduced to provide energy and computing services for the remote user group to alleviate the doubly near-far problem in a large range suffered by the remote user group.The doubly near-far problem in a small range existing in both nearby and remote user groups is mitigated by user cooperation.The specific user cooperation strategy is that the user near the base station or the UAV is used as a relay to transfer the computing task of the user far from the base station or the UAV to the MEC server for computing.By jointly optimizing users’offloading time,users’transmitting power,and the hovering position of the UAV,the resource allocation problem is modeled as a nonlinear programming problem with the objective of maximizing computation efficiency.The suboptimal solution is obtained by adopting the differential evolution algorithm.Simulation results show that,compared with the resource allocation method based on genetic algorithm and the without user cooperation method,the proposed method has higher computation efficiency.
基金supported by the BRICS STI Framework Programme(No.52261145703)the Higher Education Discipline Innovation Project(National 111 Project,No.B16016)the Guangxi Key Research and Development Plan Project(AB24010117).
文摘Photocatalytic membranes hold significant potential for promoting pollutant degradation and reducing membrane fouling in filtration systems.Although extensive research has been conducted on the independent design of photocatalysts or membrane materials to improve their catalytic and filtration performance,the complex structures and interface mechanisms,as well as insufficient light utilization,are still often overlooked,limiting the overall performance improvement of photocatalytic membranes.This work provides an overview of enhancement strategies involving restricted area effects,external fields,such as mechanical,magnetic,thermal,and electrical fields,as well as coupling techniques with advanced oxidation processes(e.g.,O_(3),Fenton,and persulfate oxidation)for dual enhancement of photocatalysts and membranes.In addition,the synthesis method of photocatalytic membranes and the influence of factors,such as light source type,frequency,and relative position on photocatalytic membrane performance were also studied.Finally,economic feasibility and pollutant removal performance were further evaluated to determine the promising enhancement strategies,paving the way for more efficient and scalable applications of photocatalytic membranes.
