Large-volume photoacoustic microscopy(PAM)or rapid PAM has attracted increasing attention in biomedical applications due to its ability to provide detailed structural and functional information on tumor pathophysiolog...Large-volume photoacoustic microscopy(PAM)or rapid PAM has attracted increasing attention in biomedical applications due to its ability to provide detailed structural and functional information on tumor pathophysiology and the neuroimmune microenvironment.Non-diffracting beams,such as Airy beams,offer extended depth-of-field(DoF),while sparse image reconstruction using deep learning enables image recovery for rapid imaging.However,Airy beams often introduce side-lobe artifacts,and achieving both extended DoF and rapid imaging remains a challenge,hindering PAM’s adoption as a routine large-volume and repeatable monitoring tool.To address these challenges,we developed multitask learning-powered large-volume,rapid photoacoustic microscopy with Airy beams(ML-LR-PAM).This approach integrates advanced software and hardware solutions designed to mitigate side-lobe artifacts and achieve super-resolution reconstruction.Unlike previous methods that neglect the simultaneous optimization of these aspects,our approach bridges this gap by employing scaled dot-product attention mechanism(SDAM)Wasserstein-based CycleGAN(SW-CycleGAN)for artifact reduction and high-resolution,large-volume imaging.We anticipate that ML-LR-PAM,through this integration,will become a standard tool in both biomedical research and clinical practice.展开更多
This paper presents a design method to implement an antenna array characterized by ultra-wide beam coverage,low profile,and low Sidelobe Level(SLL)for the application of Unmanned Aerial Vehicle(UAV)air-to-ground commu...This paper presents a design method to implement an antenna array characterized by ultra-wide beam coverage,low profile,and low Sidelobe Level(SLL)for the application of Unmanned Aerial Vehicle(UAV)air-to-ground communication.The array consists of ten broadside-radiating,ultrawide-beamwidth elements that are cascaded by a central-symmetry series-fed network with tapered currents following Dolph-Chebyshev distribution to provide low SLL.First,an innovative design of end-fire Huygens source antenna that is compatible with metal ground is presented.A low-profile,half-mode Microstrip Patch Antenna(MPA)is utilized to serve as the magnetic dipole and a monopole is utilized to serves as the electric dipole,constructing the compact,end-fire,grounded Huygens source antenna.Then,two opposite-oriented end-fire Huygens source antennas are seamlessly integrated into a single antenna element in the form of monopole-loaded MPA to accomplish the ultrawide,broadside-radiating beam.Particular consideration has been applied into the design of series-fed network as well as antenna element to compensate the adverse coupling effects between elements on the radiation performance.Experiment indicates an ultrawide Half-Power Beamwidth(HPBW)of 161°and a low SLL of-25 dB with a high gain of 12 d Bi under a single-layer configuration.The concurrent ultrawide beamwidth and low SLL make it particularly attractive for applications of UAV air-to-ground communication.展开更多
Up-and-coming high-temperature materials,refractory high entropy alloys,are suffering from lower oxidation resistance,restricting their applications in the aerospace field.In this study,two novel treatments of Al-depo...Up-and-coming high-temperature materials,refractory high entropy alloys,are suffering from lower oxidation resistance,restricting their applications in the aerospace field.In this study,two novel treatments of Al-deposited and remelted were developed to refine the microstructure and enhance the oxidation resistance of refractory high entropy alloy using electron beam freeform fabrication(EBF3).Finer and short-range ordering structures were observed in the remelted sample,whereas the Al-deposited sample showcased the formation of silicide and intermetallic phases.High-temperature cyclic and isothermal oxidation tests at 1000℃ were carried out.The total weight gain after 60 h of cyclic oxidation decreased by 17.49%and 30.46%for the remelted and deposited samples,respectively,compared to the as-cast state.Oxidation kinetics reveal an evident lower mass gain and oxidation rate in the treated samples.A multilayer oxide consisting of TiO_(2)+Al_(2)O_(3)+SiO_(2)+AlNbO_(4) was studied for its excellent oxidation resistance.The oxidation behavior of rutile,corundum and other oxides was analyzed using first principles calculations and chemical defect analysis.Overall,this research,which introduces novel treatments,offers promising insights for enhancing the inherent oxidation resistance of refractory high entropy alloys.展开更多
Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam(PBF-LB)technology.This alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applicati...Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam(PBF-LB)technology.This alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applications,given its superior mechanical properties,which are approximately 10%higher in terms of ultimate tensile strength(UTS)and yield strength after appropriate heat treatment.In as-built conditions,the alloy is characterized by the presence of soft orthorhombicα″martensite,necessitating a postprocessing heat treatment to decompose this phase and enhance the mechanical properties of the alloy.Usually,PBFed Ti6246 components undergo an annealing process that transforms theα″martensite into anα-βlamellar microstructure.The primary objective of this research was to develop a solution treatment and aging(STA)heat treatment tailored to the unique microstructure produced by the additive manufacturing process to achieve an ultrafine bilamellar microstructure reinforced by precipitation hardening.This study investigated the effects of various solution temperatures in theα-βfield(ranging from 800 to 875℃),cooling media(air and water),and aging time to determine the optimal heat treatment parameters for achieving the desired bilamellar microstructure.For each heat treatment condition,differentα-βmicrostructures were found,varying in terms of theα/βratio and the size of the primaryα-phase lamellae.Particular attention was given to how these factors were influenced by increases in solution temperature and how microhardness correlated with the percentage of the metastableβphase present after quenching.Tensile tests were performed on samples subjected to the most promising heat treatment parameters.A comparison with literature data revealed that the optimized STA treatment enhanced hardness and UTS by13%and 23%,respectively,compared with those of the annealed alloy.Fracture surface analyses were conducted to investigate fracture mechanisms.展开更多
[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,...[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,with multi-channel slow-wave structures(SWSs)forming the foundation for their realization in high-power vacuum electronic devices.[Purpose]To provide design insights for multi-channel TWTs and simultaneously enhance their output power,a W-band folded-waveguide TWT with dual electron beams and H-plane power combining was proposed.[Methods]Three-dimensional electromagnetic simulations in CST were conducted to verify the highfrequency characteristics,electric field distribution,and amplification performance of the proposed SWS,thereby confirming the validity of the design.[Results]Results indicate that the designed TWT achieves a transmission bandwidth of 10 GHz.With an electron beam voltage of 17.9 kV and a current of 0.35 A,the output power reaches 450 W at 94 GHz,corresponding to an efficiency of 7.18%and a gain of 23.5 dB.Moreover,under fixed beam voltage and current,the TWT delivers over 200 W output power across 91–99 GHz,with a 3 dB bandwidth of 91–98.5 GHz.The particle voltage distribution after modulation further validates the mode analysis.[Conclusions]These results demonstrate the feasibility of compact dual-beam power-combining structures and provide useful guidance for the design of future multi-channel TWTs.展开更多
High-quality antiferromagnetic(AFM)θ-phase manganese nitride(MnN)films were successfully grown on MgO(001)substrates by plasma-assisted molecular beam epitaxy.Structural analysis confirms the high-quality MnN film ha...High-quality antiferromagnetic(AFM)θ-phase manganese nitride(MnN)films were successfully grown on MgO(001)substrates by plasma-assisted molecular beam epitaxy.Structural analysis confirms the high-quality MnN film has a tetragonal distortion with a c/a ratio of~0.98.The film exhibits exceptional stability in both aqueous and ambient conditions,which is a crucial factor for practical applications.Electrical transport reveals its metallic behavior with an upturn at low temperatures,which could be attributed to the Kondo effect originated from nitrogen vacancy-induced magnetic impurities.Room temperature exchange bias has been demonstrated in a MnN/CoFeB heterostructure,verifying the AFM ordering of MnN.Considering its high Néel temperature~650 K,superior stability,and low-cost,this work highlights the epitaxial MnN films as a promising candidate for AFM spintronic applications.展开更多
By introducing noncanonical vortex pairs to partially coherent beams, spatial correlation singularity (SCS) and orbital angular momenta (OAM) of the resulting beams are studied using the Fraunhofer diffraction integra...By introducing noncanonical vortex pairs to partially coherent beams, spatial correlation singularity (SCS) and orbital angular momenta (OAM) of the resulting beams are studied using the Fraunhofer diffraction integral. The effect of noncanonical strength, off-axis distance and vortex sign on spatial correlation singularities in far field is stressed. Furthermore, far-field OAM spectra and densities are also investigated, and the OAM detection and crosstalk probabilities are discussed. The results show that the number of dislocations of SCS always equals the sum of absolute values of topological charges for canonical or noncanonical vortex pairs. Although the sum of the product of each OAM mode and its power weight equals the algebraic sum of topological charges for canonical vortex pairs, the relationship no longer holds in the noncanonical case except for opposite-charge vortex pairs. The changes of off-axis distance, noncanonical strength or coherence length can lead to a more dominant power in adjacent mode than that in center detection mode, which also indicates that crosstalk probabilities of adjacent modes exceed the center detection probability. This work may provide potential applications in OAM-based optical communication, imaging, sensing and computing.展开更多
A thermionic gun is endowed with a long bunch tail,which presents challenges for the compact terahertz free electron laser(FEL)facility at the Huazhong University of Science and Technology.Owing to a large energy spre...A thermionic gun is endowed with a long bunch tail,which presents challenges for the compact terahertz free electron laser(FEL)facility at the Huazhong University of Science and Technology.Owing to a large energy spread,the tail particles do not contribute to the radiation.In the original design,an x-direction slit is used in the dispersive section of the transport line to remove the tail particles.This paper presents an improved scheme to remove the tail by introducing an RF beam chopper system at the exit of the electron gun,to prevent a significant number of tail particles from entering the linac.The facility remains compact while effectively removing the tail of the bunch.The parameters of the beam chopper system are designed.Bunch parameters and radiation performance are analyzed via a start-to-end simulation.The findings indicate that 43%of the particles can pass through the beam chopper system for subsequent acceleration and transport,which saves the RF power,reduces beam loss in the linac,reduces background noise,and suppresses the sideband instability.Simultaneously,the beam chopper system causes an increase in beam emittance,energy spread,and an offset in the center of the bunch.These effects can be mitigated by a solenoid,linac,and steering coils.The simulation results for the FEL show that the micro-pulse energy is greater than 1.1μJ in the frequency range of 2.8-9.7 THz,and the maximum micro-pulse energy is 1.28μJ.展开更多
The planar-integrated magneto-optical trap(PIMOT)offers a promising platform for miniaturizing cold atom systems,but its performance and laser-power efficiency are limited by the typically Gaussian profile of the inpu...The planar-integrated magneto-optical trap(PIMOT)offers a promising platform for miniaturizing cold atom systems,but its performance and laser-power efficiency are limited by the typically Gaussian profile of the input laser beam.In this work,we present a simplified and cost-effective beam shaping solution to transform the Gaussian input into a flat-top intensity distribution using a compact system of four spherical lenses.The reshaped light field could potentially enhances PIMOT performance by improving the uniformity of the optical radiation pressure and increasing the trap distance from the chip surface.With this approach,we demonstrate a substantial reduction in the optical power required to trap 2.5×10^(5)^(87)Rb atoms,down to 30%compared to a standard Gaussian beam input.Our results open the door to more efficient and flexible PIMOT systems for quantum sensing,metrology,and atom-based quantum technology.展开更多
The significance of laser-driven polarized beam acceleration has been increasingly recognized in recent years.We propose an efficient method for generating polarized proton beams from a pre-polarized hydrogen halide g...The significance of laser-driven polarized beam acceleration has been increasingly recognized in recent years.We propose an efficient method for generating polarized proton beams from a pre-polarized hydrogen halide gas jet,utilizing magnetic vortex acceleration enhanced by a laser-driven plasma bubble.When a petawatt laser pulse passes through a pre-polarized gas jet,a bubble-like ultra-nonlinear plasma wave is formed.As a portion of the particles constituting this wave,background protons are swept by the acceleration field of the bubble and oscillate significantly along the laser propagation axis.Some of the pre-accelerated protons in the plasma wave are trapped by the acceleration field at the rear side of the target.This acceleration field is intensified by the transverse expansion of the laser-driven magnetic vortex,resulting in energetic polarized proton beams.The spin of energetic protons is determined by their precession within the electromagnetic field,which is described using the Thomas-Bargmann-Michel-Telegdi equation in analytical models and particle-in-cell simulations.Multidimensional simulations reveal that monoenergetic proton beams with an energy of hundreds of MeV,a beam charge of hundreds of pC,and a beam polarization of tens of percent can be produced at laser powers of several petawatts.Such laser-driven polarized proton beams have promise for application in polarized beam colliders,where they can be utilized to investigate particle interactions and to explore the properties of matter under extreme conditions.展开更多
Red-green-blue(RGB)beam combiners are widely used in scenarios such as augmented reality/virtual reality(AR/VR),laser projection,biochemical detection,and other fields.Optical waveguide combiners have attracted extens...Red-green-blue(RGB)beam combiners are widely used in scenarios such as augmented reality/virtual reality(AR/VR),laser projection,biochemical detection,and other fields.Optical waveguide combiners have attracted extensive attention due to their advantages of small size,high multiplexing efficiency,convenient mass production,and low cost.An RGB beam combiner based on directional couplers is designed,with a core-cladding relative refractive index difference of 0.75%.The RGB beam combiner is optimized from the perspective of parameter optimization.Using the beam propagation method(BPM),the relationship between the performance of the RGB beam combiner and individual parameters is studied,achieving preliminary optimization of the device’s performance.The key parameters of the RGB beam combiner are optimized using the entropy weight-technique for order preference by similarity to an ideal solution TOPSIS method,establishing the optimal parameter scheme and further improving the device’s performance indicators.The results show that after optimization,the multiplexing efficiencies for red,green,and blue lights,as well as the average multiplexing efficiency,reached 99.17%,99.76%,96.63%and 98.52%,respectively.The size of the RGB beam combiner is 4.768 mm×0.062 mm.展开更多
This paper discusses the influence of Sb/In ratio on the transport properties and crystal quality of the 200 nm InAs_(x)Sb_(1-x)thin film.The Sb content of InAs_(x)Sb_(1-x)thin film in all samples was verified by HRXR...This paper discusses the influence of Sb/In ratio on the transport properties and crystal quality of the 200 nm InAs_(x)Sb_(1-x)thin film.The Sb content of InAs_(x)Sb_(1-x)thin film in all samples was verified by HRXRD of the symmetrical 004 reflections and asymmetrical 115 reflections.The calculation results show that the Sb component was 0.6 in the InAs_(x)Sb_(1-x)thin film grown under the conditions of Sb/In ratio of 6 and As/In ratio of 3,which has the highest electron mobility(28560 cm^(2)/V·s)at 300 K.At the same time,the influence ofⅤ/Ⅲratio on the transport properties and crystal quality of Al_(0.2)In_(0.8)Sb/InAs_(x)Sb_(1-x)quantum well heterostructures also has been investigated.As a result,the Al_(0.2)In_(0.8)Sb/InAs_(0.4)Sb_(0.6)quantum well heterostructure with a channel thickness of 30 nm grown under the conditions of Sb/In ratio of 6 and As/In ratio of 3 has a maximum electron mobility of 28300 cm^(2)/V·s and a minimum RMS roughness of 0.68 nm.Through optimizing the growth conditions,our samples have higher electron mobility and smoother surface morphology.展开更多
A 4 MeV RF linear accelerator for electron beam irradiation applications has been developed at the PBP-CMU Electron Linac Laboratory,Thailand.The system has been reengineered using a decommissioned medical linear acce...A 4 MeV RF linear accelerator for electron beam irradiation applications has been developed at the PBP-CMU Electron Linac Laboratory,Thailand.The system has been reengineered using a decommissioned medical linear accelerator.The main components include a thermionic DC electron gun,an RF linear accelerator,a beam diagnostic chamber,and a beam exit window for electron beam irradiation.Therefore,reengineering must be performed based on the characteristics of the electron beam and its dynamics throughout the system.In this study,the electron beam current density emitted from the cathode was calculated based on the thermionic emission theory,and the result was used to produce the electron beam distribution in the gun using CST Studio Suite^(■)software.The properties of the electron beam and its acceleration in the linear accelerator and downstream diagnostic section were studied using the ASTRA electron beam dynamics simulation code,with the aim of producing an electron beam with an average energy of 4 MeV at the linear accelerator exit.The transverse beam profile and electron deposition dose in the ambient environment were calculated using Geant4 Monte Carlo simulation software to estimate the beam performance for the irradiation experiments.The parameters studied can be used as guidelines for machine operation and future experimental plans.展开更多
This paper investigates the free vibration and transient response of interconnected structures including double curved beams and intermediate straight beams,which are all constructed from functionally graded porous(FG...This paper investigates the free vibration and transient response of interconnected structures including double curved beams and intermediate straight beams,which are all constructed from functionally graded porous(FGP)materials.The strain potential and kinetic energies of each beam along with the work done by the external force are calculated.Additionally,a higher-order beam element is introduced to derive stiffness and mass matrices,along with the force vector.The curved and straight beams are discretized,and their assembled stiffness,mass matrices,and force vectors,are obtained.Continuity conditions at the joints are used to derive the total matrices of the entire structure.Subsequently,the natural frequencies and transient response of the system are determined.The accuracy of the mathematical model and the self-developed computer program is validated through the comparison of the obtained results with those of the existing literature and commercial software ANSYS,demonstrating excellent agreement.Furthermore,a comprehensive study is conducted to investigate the effects of various parameters on the free vibration and transient response of the considered structure.展开更多
With the urgently increasing demand for high-speed and large-capacity communication trans-mission,there remains a critical need for tunable terahertz(THz)devices with multi-channel in 5G/6G communication systems.A mag...With the urgently increasing demand for high-speed and large-capacity communication trans-mission,there remains a critical need for tunable terahertz(THz)devices with multi-channel in 5G/6G communication systems.A magnetic phase-coding meta-atom(MPM)is formed by the heterogeneous integration of La:YIG magneto-optical(MO)materials and Si microstructures.The MPM couples the magnetic induction phase of spin states with the propagation phase and can simultaneously satisfy the required output phase for dual frequencies under various external magnetic fields to realize the dynamic beam steering among multiple channels at 0.25 and 0.5 THz.The energy ratio of the target direction can reach 96.5%,and the nonreciprocal one-way transmission with a max isolation of 29.8 dB is realized due to the nonreciprocal phase shift of the MO layer.This nonreciprocal mechanism of magnetic induction reshaping of wavefront significantly holds promise for advancing integrated multi-functional THz devices with the characteristics of low-crosstalk,multi-channel,and multi-frequency,and has great potential to promote the development of THz large-capacity and high-speed communication.展开更多
We propose a compact scheme to modulate a relativistic electron beam(REB)into three-dimensional(3D)nanoscale bunches by injecting a rarefied REB into an underdense plasma.This scheme self-consistently integrates the l...We propose a compact scheme to modulate a relativistic electron beam(REB)into three-dimensional(3D)nanoscale bunches by injecting a rarefied REB into an underdense plasma.This scheme self-consistently integrates the lateral focusing and axial modulation of the REB in its self-driven plasma wakefield.The REB first expels the plasma electrons in its path to form a wake,where the lateral force of the chargeseparation field compresses it to higher density,so that more plasma electrons are expelled as it propagates.The positive feedback loop is repeated until the REB becomes a thin electron filament of density a hundred times that of the original.As it continues to propagate in the elongated electron-free wake bubble,the axial electric field induces an energy chirp on the electron filament,and longitudinally modulates it into 3D nanoscale bunches by asynchronous envelope oscillations.The excitation conditions of this scheme with respect to the beam and plasma parameters,as well as the spatial scale of the obtained electron bunches,are analyzed analytically and agree well with particle-in-cell simulations.In addition,our radiation simulations show that coherent extreme ultraviolet radiation can be generated with such 3D nanoscale bunches.展开更多
This paper addresses the problem of a viscoelastic Euler-Bernoulli beam under the influence of a constant velocity moving mass and different types of appendages.Four types of boundary conditions are considered:pinned-...This paper addresses the problem of a viscoelastic Euler-Bernoulli beam under the influence of a constant velocity moving mass and different types of appendages.Four types of boundary conditions are considered:pinned-pinned,fixed-pinned,fixed-free(or cantilever),and fixed-fixed.Appendages considered include lumped masses,dampers,and springs.The modal decomposition method is employed to derive the equation of motion of the beam,for which an analytical closed-form expression of the dynamic vibration response is generated.The proposed method enables the study of the effect of a single appendage or a combination of the three types of appendages on the non-dimensional dynamic response of the beam.Numerical examples are presented to illustrate the effects of these appendages and compare them to the reference cases of a beam with no appendages.The results demonstrate the importance of considering these parameters in the design of structures.The proposed method is compared to other techniques in the literature and found to be advantageous due to its direct approach.The method also offers a versatile tool for investigating various configurations,aiding in engineering design and structural analysis for which establishing a precise prediction of beam vibrations is crucial.展开更多
The Cooling Storage Ring(CSR)external-target experiment(CEE)will be the first large-scale nuclear physics experiment at the Heavy Ion Research Facility in Lanzhou(HIRFL).A beam monitor has been developed to monitor th...The Cooling Storage Ring(CSR)external-target experiment(CEE)will be the first large-scale nuclear physics experiment at the Heavy Ion Research Facility in Lanzhou(HIRFL).A beam monitor has been developed to monitor the beam status and to improve the reconstruction resolution of the primary vertex.Custom-designed pixel charge sensors,named TopmetalCEEv1,are employed in the detector to locate the position of each particle.Readout electronics for the beam monitor were designed,including front-end electronics utilizing the Topmetal-CEEv1 sensors,as well as a readout and control unit that communicates with the DAQ,trigger,and clock systems.A series of tests were performed to validate the functionality and performance of the system,including basic electronic verifications and responses toαparticles and heavy-ion beams.The results show that all designed functions of the readout electronics system work well,and this system could be used for beam monitoring in the CEE experiment.展开更多
In order to more accurately calculate the fatigue damage and fatigue life of steel-concrete composite beam under standard vehicle load,the steel beam components of a large-span steel-concrete composite beam suspension...In order to more accurately calculate the fatigue damage and fatigue life of steel-concrete composite beam under standard vehicle load,the steel beam components of a large-span steel-concrete composite beam suspension bridge were taken as the research object.Based on the S-N curve and linear fatigue damage theory,a standard segment model was established.Accordingly,the welding position of the secondary longitudinal beam was identified as the focus fatigue point,and the stress time course calculation was done for the point.The results showed that when the vehicle mass increases from 50 t to 100 t,the amount of fatigue damage will increase by more than 5 times in the same period of time,and the increase in the vehicle mass will reduce the fatigue life of the bridge structure.The fatigue damage of bridge structures increases with the increase of vehicle speed.The increase rate of fatigue damage is greater at low speeds,and the increase rate of fatigue damage slows down at high speeds.展开更多
基金National Natural Science Foundation of China(62105255,62275210,62375210)National Young Talent Program+3 种基金Key Research and Development Program of Shaanxi(2023-YBSF-293)Shaanxi Young Top-notch Talent Program,Xidian University Specially Funded Project for Interdisciplinary Exploration(TZJH2024043)Fundamental Research Funds for the Central Universities(QTZX24079)Xi'an Science and Technology Project(23ZDCYJSGG0026-2023)。
文摘Large-volume photoacoustic microscopy(PAM)or rapid PAM has attracted increasing attention in biomedical applications due to its ability to provide detailed structural and functional information on tumor pathophysiology and the neuroimmune microenvironment.Non-diffracting beams,such as Airy beams,offer extended depth-of-field(DoF),while sparse image reconstruction using deep learning enables image recovery for rapid imaging.However,Airy beams often introduce side-lobe artifacts,and achieving both extended DoF and rapid imaging remains a challenge,hindering PAM’s adoption as a routine large-volume and repeatable monitoring tool.To address these challenges,we developed multitask learning-powered large-volume,rapid photoacoustic microscopy with Airy beams(ML-LR-PAM).This approach integrates advanced software and hardware solutions designed to mitigate side-lobe artifacts and achieve super-resolution reconstruction.Unlike previous methods that neglect the simultaneous optimization of these aspects,our approach bridges this gap by employing scaled dot-product attention mechanism(SDAM)Wasserstein-based CycleGAN(SW-CycleGAN)for artifact reduction and high-resolution,large-volume imaging.We anticipate that ML-LR-PAM,through this integration,will become a standard tool in both biomedical research and clinical practice.
基金supported by the National Natural Science Foundation of China(No.62371080 and 62031006)the National Science Foundation of Chongqing,China(No.CSTB2022NSCQ-MSX0597)the Venture&Innovation Support Program for Chongqing Overseas Returnees,China(No.cx2022063)。
文摘This paper presents a design method to implement an antenna array characterized by ultra-wide beam coverage,low profile,and low Sidelobe Level(SLL)for the application of Unmanned Aerial Vehicle(UAV)air-to-ground communication.The array consists of ten broadside-radiating,ultrawide-beamwidth elements that are cascaded by a central-symmetry series-fed network with tapered currents following Dolph-Chebyshev distribution to provide low SLL.First,an innovative design of end-fire Huygens source antenna that is compatible with metal ground is presented.A low-profile,half-mode Microstrip Patch Antenna(MPA)is utilized to serve as the magnetic dipole and a monopole is utilized to serves as the electric dipole,constructing the compact,end-fire,grounded Huygens source antenna.Then,two opposite-oriented end-fire Huygens source antennas are seamlessly integrated into a single antenna element in the form of monopole-loaded MPA to accomplish the ultrawide,broadside-radiating beam.Particular consideration has been applied into the design of series-fed network as well as antenna element to compensate the adverse coupling effects between elements on the radiation performance.Experiment indicates an ultrawide Half-Power Beamwidth(HPBW)of 161°and a low SLL of-25 dB with a high gain of 12 d Bi under a single-layer configuration.The concurrent ultrawide beamwidth and low SLL make it particularly attractive for applications of UAV air-to-ground communication.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFF0609000)National Natural Science Foundation of China(Grant Nos.52171034 and 52101037)Postdoctoral Fellowship Program of CPSFara(No.GZB20230944).
文摘Up-and-coming high-temperature materials,refractory high entropy alloys,are suffering from lower oxidation resistance,restricting their applications in the aerospace field.In this study,two novel treatments of Al-deposited and remelted were developed to refine the microstructure and enhance the oxidation resistance of refractory high entropy alloy using electron beam freeform fabrication(EBF3).Finer and short-range ordering structures were observed in the remelted sample,whereas the Al-deposited sample showcased the formation of silicide and intermetallic phases.High-temperature cyclic and isothermal oxidation tests at 1000℃ were carried out.The total weight gain after 60 h of cyclic oxidation decreased by 17.49%and 30.46%for the remelted and deposited samples,respectively,compared to the as-cast state.Oxidation kinetics reveal an evident lower mass gain and oxidation rate in the treated samples.A multilayer oxide consisting of TiO_(2)+Al_(2)O_(3)+SiO_(2)+AlNbO_(4) was studied for its excellent oxidation resistance.The oxidation behavior of rutile,corundum and other oxides was analyzed using first principles calculations and chemical defect analysis.Overall,this research,which introduces novel treatments,offers promising insights for enhancing the inherent oxidation resistance of refractory high entropy alloys.
基金financed by the European Union-Next Generation EU(National Sustainable Mobility Center CN00000023,Italian Ministry of University and Research Decree n.1033-17/06/2022,Spoke 11-Innovative Materials&Lightweighting)。
文摘Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam(PBF-LB)technology.This alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applications,given its superior mechanical properties,which are approximately 10%higher in terms of ultimate tensile strength(UTS)and yield strength after appropriate heat treatment.In as-built conditions,the alloy is characterized by the presence of soft orthorhombicα″martensite,necessitating a postprocessing heat treatment to decompose this phase and enhance the mechanical properties of the alloy.Usually,PBFed Ti6246 components undergo an annealing process that transforms theα″martensite into anα-βlamellar microstructure.The primary objective of this research was to develop a solution treatment and aging(STA)heat treatment tailored to the unique microstructure produced by the additive manufacturing process to achieve an ultrafine bilamellar microstructure reinforced by precipitation hardening.This study investigated the effects of various solution temperatures in theα-βfield(ranging from 800 to 875℃),cooling media(air and water),and aging time to determine the optimal heat treatment parameters for achieving the desired bilamellar microstructure.For each heat treatment condition,differentα-βmicrostructures were found,varying in terms of theα/βratio and the size of the primaryα-phase lamellae.Particular attention was given to how these factors were influenced by increases in solution temperature and how microhardness correlated with the percentage of the metastableβphase present after quenching.Tensile tests were performed on samples subjected to the most promising heat treatment parameters.A comparison with literature data revealed that the optimized STA treatment enhanced hardness and UTS by13%and 23%,respectively,compared with those of the annealed alloy.Fracture surface analyses were conducted to investigate fracture mechanisms.
基金National Key Research and Development Program of China(2022YFF0707602)National Natural Science Foundation of China(62471097,62471115,62471101)National Natural Science Foundation of Sichuan(2025ZNSFSC0537)。
文摘[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,with multi-channel slow-wave structures(SWSs)forming the foundation for their realization in high-power vacuum electronic devices.[Purpose]To provide design insights for multi-channel TWTs and simultaneously enhance their output power,a W-band folded-waveguide TWT with dual electron beams and H-plane power combining was proposed.[Methods]Three-dimensional electromagnetic simulations in CST were conducted to verify the highfrequency characteristics,electric field distribution,and amplification performance of the proposed SWS,thereby confirming the validity of the design.[Results]Results indicate that the designed TWT achieves a transmission bandwidth of 10 GHz.With an electron beam voltage of 17.9 kV and a current of 0.35 A,the output power reaches 450 W at 94 GHz,corresponding to an efficiency of 7.18%and a gain of 23.5 dB.Moreover,under fixed beam voltage and current,the TWT delivers over 200 W output power across 91–99 GHz,with a 3 dB bandwidth of 91–98.5 GHz.The particle voltage distribution after modulation further validates the mode analysis.[Conclusions]These results demonstrate the feasibility of compact dual-beam power-combining structures and provide useful guidance for the design of future multi-channel TWTs.
文摘High-quality antiferromagnetic(AFM)θ-phase manganese nitride(MnN)films were successfully grown on MgO(001)substrates by plasma-assisted molecular beam epitaxy.Structural analysis confirms the high-quality MnN film has a tetragonal distortion with a c/a ratio of~0.98.The film exhibits exceptional stability in both aqueous and ambient conditions,which is a crucial factor for practical applications.Electrical transport reveals its metallic behavior with an upturn at low temperatures,which could be attributed to the Kondo effect originated from nitrogen vacancy-induced magnetic impurities.Room temperature exchange bias has been demonstrated in a MnN/CoFeB heterostructure,verifying the AFM ordering of MnN.Considering its high Néel temperature~650 K,superior stability,and low-cost,this work highlights the epitaxial MnN films as a promising candidate for AFM spintronic applications.
文摘By introducing noncanonical vortex pairs to partially coherent beams, spatial correlation singularity (SCS) and orbital angular momenta (OAM) of the resulting beams are studied using the Fraunhofer diffraction integral. The effect of noncanonical strength, off-axis distance and vortex sign on spatial correlation singularities in far field is stressed. Furthermore, far-field OAM spectra and densities are also investigated, and the OAM detection and crosstalk probabilities are discussed. The results show that the number of dislocations of SCS always equals the sum of absolute values of topological charges for canonical or noncanonical vortex pairs. Although the sum of the product of each OAM mode and its power weight equals the algebraic sum of topological charges for canonical vortex pairs, the relationship no longer holds in the noncanonical case except for opposite-charge vortex pairs. The changes of off-axis distance, noncanonical strength or coherence length can lead to a more dominant power in adjacent mode than that in center detection mode, which also indicates that crosstalk probabilities of adjacent modes exceed the center detection probability. This work may provide potential applications in OAM-based optical communication, imaging, sensing and computing.
基金supported by the National Natural Science Foundation of China(No.12175077).
文摘A thermionic gun is endowed with a long bunch tail,which presents challenges for the compact terahertz free electron laser(FEL)facility at the Huazhong University of Science and Technology.Owing to a large energy spread,the tail particles do not contribute to the radiation.In the original design,an x-direction slit is used in the dispersive section of the transport line to remove the tail particles.This paper presents an improved scheme to remove the tail by introducing an RF beam chopper system at the exit of the electron gun,to prevent a significant number of tail particles from entering the linac.The facility remains compact while effectively removing the tail of the bunch.The parameters of the beam chopper system are designed.Bunch parameters and radiation performance are analyzed via a start-to-end simulation.The findings indicate that 43%of the particles can pass through the beam chopper system for subsequent acceleration and transport,which saves the RF power,reduces beam loss in the linac,reduces background noise,and suppresses the sideband instability.Simultaneously,the beam chopper system causes an increase in beam emittance,energy spread,and an offset in the center of the bunch.These effects can be mitigated by a solenoid,linac,and steering coils.The simulation results for the FEL show that the micro-pulse energy is greater than 1.1μJ in the frequency range of 2.8-9.7 THz,and the maximum micro-pulse energy is 1.28μJ.
基金supported by the National Key R&D Program(Grant Nos.2021YFA1402004 and 2021YFF0603701)the National Natural Science Foundation of China(Grants Nos.12134014,U21A20433,U21A6006,and 92265108)+1 种基金supported by the Fundamental Research Funds for the Central UniversitiesUSTC Research Funds of the Double First-Class Initiative。
文摘The planar-integrated magneto-optical trap(PIMOT)offers a promising platform for miniaturizing cold atom systems,but its performance and laser-power efficiency are limited by the typically Gaussian profile of the input laser beam.In this work,we present a simplified and cost-effective beam shaping solution to transform the Gaussian input into a flat-top intensity distribution using a compact system of four spherical lenses.The reshaped light field could potentially enhances PIMOT performance by improving the uniformity of the optical radiation pressure and increasing the trap distance from the chip surface.With this approach,we demonstrate a substantial reduction in the optical power required to trap 2.5×10^(5)^(87)Rb atoms,down to 30%compared to a standard Gaussian beam input.Our results open the door to more efficient and flexible PIMOT systems for quantum sensing,metrology,and atom-based quantum technology.
基金supported by the National Natural Science Foundation of China(Grant Nos.12075081 and 12404395)the Innovation Group Project of the Natural Science Foundation of Hubei Province of China(Grant No.2024AFA038)Bin Liu acknowledges the support of Guangdong High Level Innovation Research Institute Project,Grant No.2021B0909050006.
文摘The significance of laser-driven polarized beam acceleration has been increasingly recognized in recent years.We propose an efficient method for generating polarized proton beams from a pre-polarized hydrogen halide gas jet,utilizing magnetic vortex acceleration enhanced by a laser-driven plasma bubble.When a petawatt laser pulse passes through a pre-polarized gas jet,a bubble-like ultra-nonlinear plasma wave is formed.As a portion of the particles constituting this wave,background protons are swept by the acceleration field of the bubble and oscillate significantly along the laser propagation axis.Some of the pre-accelerated protons in the plasma wave are trapped by the acceleration field at the rear side of the target.This acceleration field is intensified by the transverse expansion of the laser-driven magnetic vortex,resulting in energetic polarized proton beams.The spin of energetic protons is determined by their precession within the electromagnetic field,which is described using the Thomas-Bargmann-Michel-Telegdi equation in analytical models and particle-in-cell simulations.Multidimensional simulations reveal that monoenergetic proton beams with an energy of hundreds of MeV,a beam charge of hundreds of pC,and a beam polarization of tens of percent can be produced at laser powers of several petawatts.Such laser-driven polarized proton beams have promise for application in polarized beam colliders,where they can be utilized to investigate particle interactions and to explore the properties of matter under extreme conditions.
基金Project(52175445)supported by the National Natural Science Foundation of ChinaProject(2022JJ30743)supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(2023GK2024)supported by the Key Research and Development Program of Hunan Province,ChinaProject(2023ZZTS0391)supported by the Fundamental Research Funds for the Central Universities of China。
文摘Red-green-blue(RGB)beam combiners are widely used in scenarios such as augmented reality/virtual reality(AR/VR),laser projection,biochemical detection,and other fields.Optical waveguide combiners have attracted extensive attention due to their advantages of small size,high multiplexing efficiency,convenient mass production,and low cost.An RGB beam combiner based on directional couplers is designed,with a core-cladding relative refractive index difference of 0.75%.The RGB beam combiner is optimized from the perspective of parameter optimization.Using the beam propagation method(BPM),the relationship between the performance of the RGB beam combiner and individual parameters is studied,achieving preliminary optimization of the device’s performance.The key parameters of the RGB beam combiner are optimized using the entropy weight-technique for order preference by similarity to an ideal solution TOPSIS method,establishing the optimal parameter scheme and further improving the device’s performance indicators.The results show that after optimization,the multiplexing efficiencies for red,green,and blue lights,as well as the average multiplexing efficiency,reached 99.17%,99.76%,96.63%and 98.52%,respectively.The size of the RGB beam combiner is 4.768 mm×0.062 mm.
基金Supported by the Natural Science Basic Research Program of Shaanxi Province(2023-JC-QN-0758)Shaanxi University of Science and Technology Research Launch Project(2020BJ-26)Doctoral Research Initializing Fund of Hebei University of Science and Technology,China(1181476).
文摘This paper discusses the influence of Sb/In ratio on the transport properties and crystal quality of the 200 nm InAs_(x)Sb_(1-x)thin film.The Sb content of InAs_(x)Sb_(1-x)thin film in all samples was verified by HRXRD of the symmetrical 004 reflections and asymmetrical 115 reflections.The calculation results show that the Sb component was 0.6 in the InAs_(x)Sb_(1-x)thin film grown under the conditions of Sb/In ratio of 6 and As/In ratio of 3,which has the highest electron mobility(28560 cm^(2)/V·s)at 300 K.At the same time,the influence ofⅤ/Ⅲratio on the transport properties and crystal quality of Al_(0.2)In_(0.8)Sb/InAs_(x)Sb_(1-x)quantum well heterostructures also has been investigated.As a result,the Al_(0.2)In_(0.8)Sb/InAs_(0.4)Sb_(0.6)quantum well heterostructure with a channel thickness of 30 nm grown under the conditions of Sb/In ratio of 6 and As/In ratio of 3 has a maximum electron mobility of 28300 cm^(2)/V·s and a minimum RMS roughness of 0.68 nm.Through optimizing the growth conditions,our samples have higher electron mobility and smoother surface morphology.
基金supported by Chiang Mai University for providing infrastructure and the NSRF via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation[grant number B05F650022]for the software CST Studio Suite^(■)2023Financial support for the reengineering and commissioning of the accelerator system was provided by the Thailand Center of Excellence in Physics(ThEP Center),Science and Technology Park Chiang Mai University(CMU STeP)。
文摘A 4 MeV RF linear accelerator for electron beam irradiation applications has been developed at the PBP-CMU Electron Linac Laboratory,Thailand.The system has been reengineered using a decommissioned medical linear accelerator.The main components include a thermionic DC electron gun,an RF linear accelerator,a beam diagnostic chamber,and a beam exit window for electron beam irradiation.Therefore,reengineering must be performed based on the characteristics of the electron beam and its dynamics throughout the system.In this study,the electron beam current density emitted from the cathode was calculated based on the thermionic emission theory,and the result was used to produce the electron beam distribution in the gun using CST Studio Suite^(■)software.The properties of the electron beam and its acceleration in the linear accelerator and downstream diagnostic section were studied using the ASTRA electron beam dynamics simulation code,with the aim of producing an electron beam with an average energy of 4 MeV at the linear accelerator exit.The transverse beam profile and electron deposition dose in the ambient environment were calculated using Geant4 Monte Carlo simulation software to estimate the beam performance for the irradiation experiments.The parameters studied can be used as guidelines for machine operation and future experimental plans.
文摘This paper investigates the free vibration and transient response of interconnected structures including double curved beams and intermediate straight beams,which are all constructed from functionally graded porous(FGP)materials.The strain potential and kinetic energies of each beam along with the work done by the external force are calculated.Additionally,a higher-order beam element is introduced to derive stiffness and mass matrices,along with the force vector.The curved and straight beams are discretized,and their assembled stiffness,mass matrices,and force vectors,are obtained.Continuity conditions at the joints are used to derive the total matrices of the entire structure.Subsequently,the natural frequencies and transient response of the system are determined.The accuracy of the mathematical model and the self-developed computer program is validated through the comparison of the obtained results with those of the existing literature and commercial software ANSYS,demonstrating excellent agreement.Furthermore,a comprehensive study is conducted to investigate the effects of various parameters on the free vibration and transient response of the considered structure.
基金supported by the National Natural Science Foun-dation of China(Grant Nos.62371258,62335012,62205160,and 62435010)the Tianjin Youth Science and Technology Talent Project(Grant No.QN20230227)+1 种基金the Natural Science Foundation of Tianjin(Grant No.24JCYBJC01860)the Fundamental Research Funds for the Central Universities,Nan-kai University(Grant No.075-63253215).
文摘With the urgently increasing demand for high-speed and large-capacity communication trans-mission,there remains a critical need for tunable terahertz(THz)devices with multi-channel in 5G/6G communication systems.A magnetic phase-coding meta-atom(MPM)is formed by the heterogeneous integration of La:YIG magneto-optical(MO)materials and Si microstructures.The MPM couples the magnetic induction phase of spin states with the propagation phase and can simultaneously satisfy the required output phase for dual frequencies under various external magnetic fields to realize the dynamic beam steering among multiple channels at 0.25 and 0.5 THz.The energy ratio of the target direction can reach 96.5%,and the nonreciprocal one-way transmission with a max isolation of 29.8 dB is realized due to the nonreciprocal phase shift of the MO layer.This nonreciprocal mechanism of magnetic induction reshaping of wavefront significantly holds promise for advancing integrated multi-functional THz devices with the characteristics of low-crosstalk,multi-channel,and multi-frequency,and has great potential to promote the development of THz large-capacity and high-speed communication.
基金supported by the National Key R&D Program of China(Grant No.2024YFA1613400)the National Natural Science Foundation of China(Grant Nos.12475238,12175154,12205201,and 12475248)+5 种基金the Financial Support for Outstanding Talents Training Fund in Shenzhen(Project No.202101)the Shenzhen Science and Technology Program(Grant No.RCYX20221008092851073)the Guangdong Province Key Construction Discipline Scientific Research Capacity Improvement Project(Grant No.2021ZDJS107)the Natural Science Foundation of Guangdong(Grant No.2025A1515012853)the Natural Science Foundation of Top Talent of SZTU(Grant Nos.GDRC202310 and GDRC202423)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2025A1515010791).
文摘We propose a compact scheme to modulate a relativistic electron beam(REB)into three-dimensional(3D)nanoscale bunches by injecting a rarefied REB into an underdense plasma.This scheme self-consistently integrates the lateral focusing and axial modulation of the REB in its self-driven plasma wakefield.The REB first expels the plasma electrons in its path to form a wake,where the lateral force of the chargeseparation field compresses it to higher density,so that more plasma electrons are expelled as it propagates.The positive feedback loop is repeated until the REB becomes a thin electron filament of density a hundred times that of the original.As it continues to propagate in the elongated electron-free wake bubble,the axial electric field induces an energy chirp on the electron filament,and longitudinally modulates it into 3D nanoscale bunches by asynchronous envelope oscillations.The excitation conditions of this scheme with respect to the beam and plasma parameters,as well as the spatial scale of the obtained electron bunches,are analyzed analytically and agree well with particle-in-cell simulations.In addition,our radiation simulations show that coherent extreme ultraviolet radiation can be generated with such 3D nanoscale bunches.
文摘This paper addresses the problem of a viscoelastic Euler-Bernoulli beam under the influence of a constant velocity moving mass and different types of appendages.Four types of boundary conditions are considered:pinned-pinned,fixed-pinned,fixed-free(or cantilever),and fixed-fixed.Appendages considered include lumped masses,dampers,and springs.The modal decomposition method is employed to derive the equation of motion of the beam,for which an analytical closed-form expression of the dynamic vibration response is generated.The proposed method enables the study of the effect of a single appendage or a combination of the three types of appendages on the non-dimensional dynamic response of the beam.Numerical examples are presented to illustrate the effects of these appendages and compare them to the reference cases of a beam with no appendages.The results demonstrate the importance of considering these parameters in the design of structures.The proposed method is compared to other techniques in the literature and found to be advantageous due to its direct approach.The method also offers a versatile tool for investigating various configurations,aiding in engineering design and structural analysis for which establishing a precise prediction of beam vibrations is crucial.
基金supported by the National Natural Science Foundation of China(Nos.11927901,12105110,U2032209,12275105)the National Key Research and Development Program of China(Nos.2020YFE0202002,2022YFA1602103)the Fundamental Research Funds for the Central Universities(No.CCNU22QN005)。
文摘The Cooling Storage Ring(CSR)external-target experiment(CEE)will be the first large-scale nuclear physics experiment at the Heavy Ion Research Facility in Lanzhou(HIRFL).A beam monitor has been developed to monitor the beam status and to improve the reconstruction resolution of the primary vertex.Custom-designed pixel charge sensors,named TopmetalCEEv1,are employed in the detector to locate the position of each particle.Readout electronics for the beam monitor were designed,including front-end electronics utilizing the Topmetal-CEEv1 sensors,as well as a readout and control unit that communicates with the DAQ,trigger,and clock systems.A series of tests were performed to validate the functionality and performance of the system,including basic electronic verifications and responses toαparticles and heavy-ion beams.The results show that all designed functions of the readout electronics system work well,and this system could be used for beam monitoring in the CEE experiment.
文摘In order to more accurately calculate the fatigue damage and fatigue life of steel-concrete composite beam under standard vehicle load,the steel beam components of a large-span steel-concrete composite beam suspension bridge were taken as the research object.Based on the S-N curve and linear fatigue damage theory,a standard segment model was established.Accordingly,the welding position of the secondary longitudinal beam was identified as the focus fatigue point,and the stress time course calculation was done for the point.The results showed that when the vehicle mass increases from 50 t to 100 t,the amount of fatigue damage will increase by more than 5 times in the same period of time,and the increase in the vehicle mass will reduce the fatigue life of the bridge structure.The fatigue damage of bridge structures increases with the increase of vehicle speed.The increase rate of fatigue damage is greater at low speeds,and the increase rate of fatigue damage slows down at high speeds.
