X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system ...X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.展开更多
Optoelectronic terahertz generation and detection play a key role in the applications of non-destructive testing,which involves different areas such as physics,biological,material science,imaging,explosions detection,...Optoelectronic terahertz generation and detection play a key role in the applications of non-destructive testing,which involves different areas such as physics,biological,material science,imaging,explosions detection,astronomy applications,semiconductor technology and superconductiong electronics. In this article,we present a reviewof the principle and performance of typical terahertz sources,detectors and non-destructive testing applications. On this basis,the newdevelopment and trends of terahertz radiation detectors are also discussed.展开更多
Highlights By conjugating the same anti-N monoclonal antibody(mAb4-mAb1)with colloidal gold or fluorescent microspheres,this study developed two rapid point-of-care antigen immunochromatographic strips for the detecti...Highlights By conjugating the same anti-N monoclonal antibody(mAb4-mAb1)with colloidal gold or fluorescent microspheres,this study developed two rapid point-of-care antigen immunochromatographic strips for the detection of porcine deltacoronavirus.The fluorescent microsphere-based lateral flow test strip demonstrated a sensitivity of 10^(1.7)TCID_(50)/0.1 mL,which is fourfold higher than that of the colloidal gold-based assay.Porcine deltacoronavirus(PDCoV)is a recently identified enteric coronavirus that causes an acute infectious disease in piglets,leading to diarrhea,vomiting,dehydration,and mortality(Hu et al.2015).展开更多
This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview ...This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.展开更多
The performance and price of copper-based micro linear products are determined by the diameter uniformity.How to accurately detect the wire diameter of long-length copper based micro linear products without cutting or...The performance and price of copper-based micro linear products are determined by the diameter uniformity.How to accurately detect the wire diameter of long-length copper based micro linear products without cutting or damage has always been a technical concern for production enterprises.Herein,a novel approach was developed for nondestructive detection of the average diameter at any given segment of a long copper wire by assessing the adsorption capacity of arginine on its surface.The amount of adsorbent on the surface of the copper wire exhibits a positive correlation with the area,which can be detected by extractive electrospray ionization mass spectrometry(EESI-MS)after online elution with ammonia.The experimental results demonstrated that the analysis can be completed within 15 min,with a good linear relationship between copper wires with different diameters and the adsorption capacity of arginine.The linear correlation coefficient R2was 0.995,the relative standard deviation was 1.10%-2.81%,and the detection limit reached 2.5μm(length of segment=4 cm),showing potential applications for facile measurement of the average diameter of various metal wires.展开更多
Phase aberration correction for medical ultrasound systems has attracted a great deal of attention. Since phased array techniques are now widely employed for industrial non-destructive testing （NDT） applications in ...Phase aberration correction for medical ultrasound systems has attracted a great deal of attention. Since phased array techniques are now widely employed for industrial non-destructive testing （NDT） applications in various fields, the problem of phase aberrations in the process of NDT testing is considered. The technique of cross-covariance for phase aberration correction is presented. The performance of the technique for phase aberration correction is tested by means of echo signals obtained in practical non-destructive testing experiment. The results show that the technique has the better accuracy of phase correction.展开更多
Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly diffic...Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly difficult mines and meet the requirements of environmental protection and safety regulations.It promotes the development of a circular economy in mines through the development of lowgrade resources and the resource utilization of waste,and extends the service life of mines.The mass concentration of solid content(abbreviated as“concentration”)is a critical parameter for CPB.However,discrepancies often arise between the on-site measurements and the pre-designed values due to factors such as groundwater inflow and segregation within the goaf,which cannot be evaluated after the solidification of CPB.This paper innovatively provides an in-situ non-destructive approach to identify the real concentration of CPB after curing for certain days using hyperspectral imaging(HSI)technology.Initially,the spectral variation patterns under different concentration conditions were investigated through hyperspectral scanning experiments on CPB samples.The results demonstrate that as the CPB concentration increases from 61wt%to 73wt%,the overall spectral reflectance gradually increases,with two distinct absorption peaks observed at 1407 and 1917 nm.Notably,the reflectance at 1407 nm exhibited a strong linear relationship with the concentration.Subsequently,the K-nearest neighbors(KNN)and support vector machine(SVM)algorithms were employed to classify and identify different concentrations.The study revealed that,with the KNN algorithm,the highest accuracy was achieved when K(number of nearest neighbors)was 1,although this resulted in overfitting.When K=3,the model displayed the optimal balance between accuracy and stability,with an accuracy of 95.03%.In the SVM algorithm,the highest accuracy of 98.24%was attained with parameters C(regularization parameter)=200 and Gamma(kernel coefficient)=10.A comparative analysis of precision,accuracy,and recall further highlighted that the SVM provided superior stability and precision for identifying CPB concentration.Thus,HSI technology offers an effective solution for the in-situ,non-destructive monitoring of CPB concentration,presenting a promising approach for optimizing and controlling CPB characteristic parameters.展开更多
Quantitative detection of sleeve grouting compactness is a technical challenge in civil engineering testing.This study explores a novel quantitative detection method based on ultrasonic time-frequency dual-domain anal...Quantitative detection of sleeve grouting compactness is a technical challenge in civil engineering testing.This study explores a novel quantitative detection method based on ultrasonic time-frequency dual-domain analysis.It establishes a mapping relationship between sleeve grouting compactness and characteristic parameters.First,this study made samples with gradient defects for two types of grouting sleeves,G18 and G20.These included four cases:2D,4D,6D defects(where D is the diameter of the grouting sleeve),and no-defect.Then,an ultrasonic input/output data acquisition system was established.Three-dimensional sound field distribution data were obtained through an orthogonal detection layout and pulse reflection principles.Finally,a novel quantification detection with a comprehensive defect index(DI)was established by comprehensively considering eight feature parameters,such as time-frequency domain Kurtosis factor(KU),Skewness factor(SK),Formfactor(FF),Crest factor(CF),Impulse factor(IF),Clearance factor(CLF),Wavelet packet energy entropy(WPEE),and Hilbert energy peak(HEP).Construct a DI index by quantifying the difference between defect signals and defect free signals in the time-frequency domain.Experimental results show that,under no-defect conditions,the values of feature parameters are significantly lower than those under defect conditions.Among these,the KU,FF,CF,WPEE and HEP exhibit strong correlations with grout sleeve compactness.The proposed DI index in both types of grout sleeves showed good universality with a linear fit goodness of 0.847–0.962.However,G20 the larger inner diameter and length of the sleeve result in a more complex medium effect during ultrasonic propagation,making its DI index more sensitive to defects than the G18 sleeve.Therefore,the presented method is effective for quantitative detection and analysis of the compactness of grouting sleeves.展开更多
Focusing on civil aircraft flap skew detection design,this paper proposes a high-robustness monitoring design methodology to address insufficient monitor robustness that may trigger false alarms and disrupt airline op...Focusing on civil aircraft flap skew detection design,this paper proposes a high-robustness monitoring design methodology to address insufficient monitor robustness that may trigger false alarms and disrupt airline operations.Based on flap skew detection principles and threshold design criteria,the threshold range is defined with upper limit of maximum deformation under aerodynamic load and lower limit of sensor error margin and nominal flight deformation.Since the complex loading conditions of maximum flap differential deformation(max Δλ)during normal flight cannot be theoretically determined,probabilistic methods are employed:Flight test data from hundreds of sorties are analyzed using generalized extreme value distribution.Confidence levels are verified via Kolmogorov-Smirnov(K-S)hypothesis testing.Then probability density function of max Δλis established.The false alarm rate is calculated through cumulative probability values of max Δλat varying thresholds.Boundary conditions for false alarm rate are determined by safety assessment and dispatch reliability analysis.The derived monitoring threshold is verified against finite element analysis predictions and iron bird rig test.The results confirm the methodology’s validity,meeting all design objectives.展开更多
Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed th...Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed through the reports reviewed in this paper. Thanks to its richness of spectral components, various applications of this technique have been proposed and reported in the lit- erature covering both structural integrity inspection and material characterization in various industrial sectors. To support its development and for better understanding of the phenomena around the transient induced eddy currents, attempts for its modelling both analytically and numeri- cally have been made by researchers around the world. This review is an attempt to capture the state-of-the-art development and applications of PEC, especially in the last 15 years and it is not intended to be exhaustive. Future challenges and opportunities for PEC NDT＆E are also presented.展开更多
Composite materials are increasingly used in the aerospace industry.To fully realise the weight saving potential along with superior mechanical properties that composites offer in safety critical applications,reliable...Composite materials are increasingly used in the aerospace industry.To fully realise the weight saving potential along with superior mechanical properties that composites offer in safety critical applications,reliable Non-Destructive Testing(NDT)methods are required to prevent catastrophic failures.This paper will review the state of the art in the field and point to highlight the success and challenges that different NDT methods are faced to evaluate the integrity of critical aerospace composites.The focus will be on advanced certificated NDT methods for damage detection and characterization in composite laminates for use in the aircraft primary and secondary structures.展开更多
BACKGROUND Sessile serrated lesions(SSLs)are premalignant polyps implicated in up to 30%of colorectal cancers.Australia reports high SSL detection rates(SSL-DRs),yet with marked variability(3.1%-24%).This substantial ...BACKGROUND Sessile serrated lesions(SSLs)are premalignant polyps implicated in up to 30%of colorectal cancers.Australia reports high SSL detection rates(SSL-DRs),yet with marked variability(3.1%-24%).This substantial variation raises concerns about missed lesions and post-colonoscopy colorectal cancer.This study investigates determinants associated with SSL-DR variation in regional Australia.AIM To study how patient,clinical,and colonoscopy factors are associated with SSL detection in a regional Australian practice.We aimed to contribute high-detection data to the literature by analyzing the association of SSL detection with various determinants.METHODS This retrospective,cross-sectional analysis examined 1450 colonoscopies performed at Port Macquarie Gastroenterology during 2023.Sigmoidoscopies and repeat procedures were excluded.Multivariate logistic regression analyzed associations between SSL detection and patient demographics,clinical indications,procedural factors,and comorbidities.RESULTS The overall SSL-DR was 30.7%.Multivariate analysis identified several independent predictors:Clinical indication,bowel preparation quality,inflammatory bowel disease status,and serrated polyposis syndrome.The faecal occult blood test positive(FOBT)(+)cohort showed the highest predicted SSL detection probability(39.8%),while clinical symptoms showed the lowest(22.3%).After adjustment,SSL detection odds were 2.3 times greater among FOBT(+)patients than those with clinical symptoms(adjusted odds ratio=2.30,95%confidence interval:1.20-4.40,P=0.004).CONCLUSION SSL-DR as a quality indicator requires contextualization regarding clinical indications,bowel preparation quality,and comorbidities.There was a significantly higher prevalence of SSLs in FOBT(+)patients.Despite comprehensive adjustment,this study cannot fully explain the wide SSL-DR variation in Australia,highlighting the need for standardized detection protocols and further research to ensure optimal cancer prevention outcomes.展开更多
In detecting system fault algorithms,the false alarm rate and undectect rate generated by residual Chi-square test can affect the stability of filters.The paper proposes a fault detection algorithm based on sequential...In detecting system fault algorithms,the false alarm rate and undectect rate generated by residual Chi-square test can affect the stability of filters.The paper proposes a fault detection algorithm based on sequential residual Chi-square test and applies to fault detection of an integrated navigation system.The simulation result shows that the algorithm can accurately detect the fault information of global positioning system(GPS),eliminate the influence of false alarm and missed detection on filter,and enhance fault tolerance of integrated navigation systems.展开更多
Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of c...Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.展开更多
Hypothesis testing analysis and unknown parameter estimation of both the intermediate frequency(IF) and baseband GPS signal detection are given by using the generalized likelihood ratio test(GLRT) approach,applying th...Hypothesis testing analysis and unknown parameter estimation of both the intermediate frequency(IF) and baseband GPS signal detection are given by using the generalized likelihood ratio test(GLRT) approach,applying the model of GPS signal in white Gaussian noise,It is proved that the test statistic follows central or noncentral F distribution,It is also pointed out that the test statistic is nearly identical to central or noncentral chi-squared distribution because the processing samples are large enough to be considered as infinite in GPS acquisition problem.It is also proved that the probability of false alarm,the probability of detection and the threshold are affected largely when the hypothesis testing refers to the full pseudorandom noise(PRN) code phase and Doppler frequency search space cells instead of each individual cell.The performance of the test statistic is also given with combining the noncoherent integration.展开更多
Wheat quality detection is essential to ensure the safety ofwheat circulation and storage.The traditional wheat quality detection methods mainly include artificial sensory evaluation and physicochemical index analysis...Wheat quality detection is essential to ensure the safety ofwheat circulation and storage.The traditional wheat quality detection methods mainly include artificial sensory evaluation and physicochemical index analysis,which are difficult to meet the requirements for high accuracy and efficiency in modern wheat quality detection due to the disadvantages of subjectivity,destruction of sample integrity and low efficiency.With the rapid development of optical technology,various optical-based methods,using near-infrared spectroscopy technology,hyperspectral imaging technology and terahertz,etc.,have been proposed for wheat quality detection.These methods have the characteristics of nondestructiveness and high efficiency which make them popular in wheat quality detection in recent years.In this paper,various state-of-the-art optical-based techniques of wheat quality detection are analyzed and summarized in detail.Firstly,the principle and process of common optical non-destructive detection methods for wheat quality are introduced.Then,the optical techniques used in these detection methods are divided into seven categories,and the comparison of these technologies and their advantages and disadvantages are further discussed.It shows that terahertz technology is regarded as the most promising wheat quality detection method compared with other optical detection technologies,because it can not only detect most types of wheat deterioration,but also has higher accuracy and efficiency.Finally,the research of optical technology in wheat quality detection is prospected.The future research of optical technology-based wheat quality detection mainly includes the construction of wheat quality optical detection standardization database,the fusion of multiple optical detection technologies and multiple quality index information,the improvement of the anti-interference of optical technology and the industrialization of optical inspection technology for wheat quality.These studies are of great significance to improve the detection technology of wheat and ensure the storage safety of wheat in the future.展开更多
Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance p...Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance philosophy used in theaircraft design methodology as well as many other operation and maintenance programsof machinery and constructions. The following study is focusing on overviewing animportant group of NDT methods: the optical and other ones, which found broadapplicability in scientific and industrial studies nowadays. The paper discusses theselected most widely applicable methods, namely, visual testing, ultrasonic testing,radiographic testing, infrared thermography as well as electronic speckle patterninterferometry and shearographic testing. Besides the basic principles of testing usingthese methods, their potential applications in various industrial and technologicalbranches are broadly discussed. The analysis as categorization of the NDT methodsprovided in this paper may help in selection of such methods in diagnosis of varioustypes of structures and defects and damage occurring in these structures.展开更多
The characterization of ultra-soft clayey soil exhibits extreme challenges due to low shear strength of such material.Hence,inspecting the non-destructive electrical impedance behavior of untreated and treated ultra-s...The characterization of ultra-soft clayey soil exhibits extreme challenges due to low shear strength of such material.Hence,inspecting the non-destructive electrical impedance behavior of untreated and treated ultra-soft clayey soils gains more attention.Both shear strength and electrical impedance were measured experimentally for both untreated and treated ultra-soft clayey soils.The shear strength of untreated ultra-soft clayey soil reached 0.17 kPa for 10% bentonite content,while the shear strengths increased to 0.27 kPa and 6.7 kPa for 10% bentonite content treated with 2% lime and 10% polymer,respectively.The electrical impedance of the ultra-soft clayey soil has shown a significant decrease from 1.6 kΩ to 0.607 kΩ when the bentonite content increased from 2% to 10% at a frequency of 300 kHz.The10%lime and 10% polymer treatments have decreased the electrical impedances of ultra-soft clayey soil with 10%bentonite from 0.607 kΩ to 0.12 kΩ and 0.176 kΩ,respectively,at a frequency of 300 kHz.A new mathematical model has been accordingly proposed to model the non-destructive electrical impedancefrequency relationship for both untreated and treated ultra-soft clayey soils.The new model has shown a good agreement with experimental data with coefficient of determination（R;）up to 0.99 and root mean square error（RMSE） of 0.007 kΩ.展开更多
In recent decades,many software reliability growth models（SRGMs） have been proposed for the engineers and testers in measuring the software reliability precisely.Most of them is established based on the non-homogene...In recent decades,many software reliability growth models（SRGMs） have been proposed for the engineers and testers in measuring the software reliability precisely.Most of them is established based on the non-homogeneous Poisson process（NHPP）,and it is proved that the prediction accuracy of such models could be improved by adding the describing of characterization of testing effort.However,some research work indicates that the fault detection rate（FDR） is another key factor affects final software quality.Most early NHPPbased models deal with the FDR as constant or piecewise function,which does not fit the different testing stages well.Thus,this paper first incorporates a multivariate function of FDR,which is bathtub-shaped,into the NHPP-based SRGMs considering testing effort in order to further improve performance.A new model framework is proposed,and a stepwise method is used to apply the framework with real data sets to find the optimal model.Experimental studies show that the obtained new model can provide better performance of fitting and prediction compared with other traditional SRGMs.展开更多
Basic magnesium sulfate cement coral aggregate concrete(MCAC)is a new type of concrete consisting of basic magnesium sulfate cement,coarse coral aggregate,coral reef sand and seawater.The rebound hammer(RH),the ultras...Basic magnesium sulfate cement coral aggregate concrete(MCAC)is a new type of concrete consisting of basic magnesium sulfate cement,coarse coral aggregate,coral reef sand and seawater.The rebound hammer(RH),the ultrasonic pulse velocity(UPV)and the compressive strength(fcu)tests of 14 sets of cube specimens of the MCAC after 28 d of aging were conducted.The impact of the content and length of sisal fiber on the relationship between the fcu-RH and the fcu-UPV was determined.A mathematical model was established to predict the strength of the MCAC using the UPV,RH,and comprehensive UPV/RH methods and to obtain the curves of test strength.The applicability of the test strength curves of ordinary portland concrete(OPC),light-weight aggregate concrete(LAC),and coral aggregate concrete(CAC)to MCAC was assessed.The results showed that the test strength curves of OPC,LAC and CAC were inappropriate to determine the strength of MCAC using non-destructive method.The relative standard error of the curves of test strength of the RH method and the comprehensive method met the specifications,whereas that of the UPV method did not.展开更多
基金supported by the National Natural Science Foundation of China(Nos.12341501 and 12575164)。
文摘X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.
基金supported by the Cooperative Innovation Center of Terahertz Science , the National Basic Research Program of China (Grant No. 2014CB339800)the National Natural Science Foundation of China (Grant Nos. 61138001, 61420106006)+1 种基金the Program for Changjiang Scholars and Innovative Research Team in University (grant No. IRT13033)the Major National Development Project of Scientific Instruments and Equipment of China (Grant No. 2011YQ150021)
文摘Optoelectronic terahertz generation and detection play a key role in the applications of non-destructive testing,which involves different areas such as physics,biological,material science,imaging,explosions detection,astronomy applications,semiconductor technology and superconductiong electronics. In this article,we present a reviewof the principle and performance of typical terahertz sources,detectors and non-destructive testing applications. On this basis,the newdevelopment and trends of terahertz radiation detectors are also discussed.
基金financially supported by the National Key Research and Development Program of China(2021YFF0703600)。
文摘Highlights By conjugating the same anti-N monoclonal antibody(mAb4-mAb1)with colloidal gold or fluorescent microspheres,this study developed two rapid point-of-care antigen immunochromatographic strips for the detection of porcine deltacoronavirus.The fluorescent microsphere-based lateral flow test strip demonstrated a sensitivity of 10^(1.7)TCID_(50)/0.1 mL,which is fourfold higher than that of the colloidal gold-based assay.Porcine deltacoronavirus(PDCoV)is a recently identified enteric coronavirus that causes an acute infectious disease in piglets,leading to diarrhea,vomiting,dehydration,and mortality(Hu et al.2015).
文摘This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.
基金supported by the National Natural Science Foundation of China(No.22422402)National Key Research and Development Program of China(No.2022YFF0705300)Key Research and Development Program of Jiangxi Province(No.20232BBG70004)。
文摘The performance and price of copper-based micro linear products are determined by the diameter uniformity.How to accurately detect the wire diameter of long-length copper based micro linear products without cutting or damage has always been a technical concern for production enterprises.Herein,a novel approach was developed for nondestructive detection of the average diameter at any given segment of a long copper wire by assessing the adsorption capacity of arginine on its surface.The amount of adsorbent on the surface of the copper wire exhibits a positive correlation with the area,which can be detected by extractive electrospray ionization mass spectrometry(EESI-MS)after online elution with ammonia.The experimental results demonstrated that the analysis can be completed within 15 min,with a good linear relationship between copper wires with different diameters and the adsorption capacity of arginine.The linear correlation coefficient R2was 0.995,the relative standard deviation was 1.10%-2.81%,and the detection limit reached 2.5μm(length of segment=4 cm),showing potential applications for facile measurement of the average diameter of various metal wires.
基金National Natural Science Foundation of China(No.61201412)Ntural Science Foundation of Shanxi Province(No.2012021011-5)
文摘Phase aberration correction for medical ultrasound systems has attracted a great deal of attention. Since phased array techniques are now widely employed for industrial non-destructive testing （NDT） applications in various fields, the problem of phase aberrations in the process of NDT testing is considered. The technique of cross-covariance for phase aberration correction is presented. The performance of the technique for phase aberration correction is tested by means of echo signals obtained in practical non-destructive testing experiment. The results show that the technique has the better accuracy of phase correction.
基金funded by the National Natural Science Foundation of China(Nos.52474165 and 52522404)。
文摘Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly difficult mines and meet the requirements of environmental protection and safety regulations.It promotes the development of a circular economy in mines through the development of lowgrade resources and the resource utilization of waste,and extends the service life of mines.The mass concentration of solid content(abbreviated as“concentration”)is a critical parameter for CPB.However,discrepancies often arise between the on-site measurements and the pre-designed values due to factors such as groundwater inflow and segregation within the goaf,which cannot be evaluated after the solidification of CPB.This paper innovatively provides an in-situ non-destructive approach to identify the real concentration of CPB after curing for certain days using hyperspectral imaging(HSI)technology.Initially,the spectral variation patterns under different concentration conditions were investigated through hyperspectral scanning experiments on CPB samples.The results demonstrate that as the CPB concentration increases from 61wt%to 73wt%,the overall spectral reflectance gradually increases,with two distinct absorption peaks observed at 1407 and 1917 nm.Notably,the reflectance at 1407 nm exhibited a strong linear relationship with the concentration.Subsequently,the K-nearest neighbors(KNN)and support vector machine(SVM)algorithms were employed to classify and identify different concentrations.The study revealed that,with the KNN algorithm,the highest accuracy was achieved when K(number of nearest neighbors)was 1,although this resulted in overfitting.When K=3,the model displayed the optimal balance between accuracy and stability,with an accuracy of 95.03%.In the SVM algorithm,the highest accuracy of 98.24%was attained with parameters C(regularization parameter)=200 and Gamma(kernel coefficient)=10.A comparative analysis of precision,accuracy,and recall further highlighted that the SVM provided superior stability and precision for identifying CPB concentration.Thus,HSI technology offers an effective solution for the in-situ,non-destructive monitoring of CPB concentration,presenting a promising approach for optimizing and controlling CPB characteristic parameters.
基金supported in part by the National Natural Science Foundation of China Grant 11962006the Natural Science Foundation of Jiangxi Province of China Grant 20232BAB204067.
文摘Quantitative detection of sleeve grouting compactness is a technical challenge in civil engineering testing.This study explores a novel quantitative detection method based on ultrasonic time-frequency dual-domain analysis.It establishes a mapping relationship between sleeve grouting compactness and characteristic parameters.First,this study made samples with gradient defects for two types of grouting sleeves,G18 and G20.These included four cases:2D,4D,6D defects(where D is the diameter of the grouting sleeve),and no-defect.Then,an ultrasonic input/output data acquisition system was established.Three-dimensional sound field distribution data were obtained through an orthogonal detection layout and pulse reflection principles.Finally,a novel quantification detection with a comprehensive defect index(DI)was established by comprehensively considering eight feature parameters,such as time-frequency domain Kurtosis factor(KU),Skewness factor(SK),Formfactor(FF),Crest factor(CF),Impulse factor(IF),Clearance factor(CLF),Wavelet packet energy entropy(WPEE),and Hilbert energy peak(HEP).Construct a DI index by quantifying the difference between defect signals and defect free signals in the time-frequency domain.Experimental results show that,under no-defect conditions,the values of feature parameters are significantly lower than those under defect conditions.Among these,the KU,FF,CF,WPEE and HEP exhibit strong correlations with grout sleeve compactness.The proposed DI index in both types of grout sleeves showed good universality with a linear fit goodness of 0.847–0.962.However,G20 the larger inner diameter and length of the sleeve result in a more complex medium effect during ultrasonic propagation,making its DI index more sensitive to defects than the G18 sleeve.Therefore,the presented method is effective for quantitative detection and analysis of the compactness of grouting sleeves.
文摘Focusing on civil aircraft flap skew detection design,this paper proposes a high-robustness monitoring design methodology to address insufficient monitor robustness that may trigger false alarms and disrupt airline operations.Based on flap skew detection principles and threshold design criteria,the threshold range is defined with upper limit of maximum deformation under aerodynamic load and lower limit of sensor error margin and nominal flight deformation.Since the complex loading conditions of maximum flap differential deformation(max Δλ)during normal flight cannot be theoretically determined,probabilistic methods are employed:Flight test data from hundreds of sorties are analyzed using generalized extreme value distribution.Confidence levels are verified via Kolmogorov-Smirnov(K-S)hypothesis testing.Then probability density function of max Δλis established.The false alarm rate is calculated through cumulative probability values of max Δλat varying thresholds.Boundary conditions for false alarm rate are determined by safety assessment and dispatch reliability analysis.The derived monitoring threshold is verified against finite element analysis predictions and iron bird rig test.The results confirm the methodology’s validity,meeting all design objectives.
基金Ministry of Higher Education of Malaysia for funding the project on PEC NDT at IIUM through the research grant FRGS16-059-0558supported by the National Natural Science Foundation of China under research grants 51677187 and 51307172
文摘Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed through the reports reviewed in this paper. Thanks to its richness of spectral components, various applications of this technique have been proposed and reported in the lit- erature covering both structural integrity inspection and material characterization in various industrial sectors. To support its development and for better understanding of the phenomena around the transient induced eddy currents, attempts for its modelling both analytically and numeri- cally have been made by researchers around the world. This review is an attempt to capture the state-of-the-art development and applications of PEC, especially in the last 15 years and it is not intended to be exhaustive. Future challenges and opportunities for PEC NDT＆E are also presented.
基金the support of NVIDIA Corporation with the donation of the Titan Xp GPU used for this researchsupported by EPSRC grant EP/R002495/1the European Metrology Research Programme through grant 17IND08。
文摘Composite materials are increasingly used in the aerospace industry.To fully realise the weight saving potential along with superior mechanical properties that composites offer in safety critical applications,reliable Non-Destructive Testing(NDT)methods are required to prevent catastrophic failures.This paper will review the state of the art in the field and point to highlight the success and challenges that different NDT methods are faced to evaluate the integrity of critical aerospace composites.The focus will be on advanced certificated NDT methods for damage detection and characterization in composite laminates for use in the aircraft primary and secondary structures.
文摘BACKGROUND Sessile serrated lesions(SSLs)are premalignant polyps implicated in up to 30%of colorectal cancers.Australia reports high SSL detection rates(SSL-DRs),yet with marked variability(3.1%-24%).This substantial variation raises concerns about missed lesions and post-colonoscopy colorectal cancer.This study investigates determinants associated with SSL-DR variation in regional Australia.AIM To study how patient,clinical,and colonoscopy factors are associated with SSL detection in a regional Australian practice.We aimed to contribute high-detection data to the literature by analyzing the association of SSL detection with various determinants.METHODS This retrospective,cross-sectional analysis examined 1450 colonoscopies performed at Port Macquarie Gastroenterology during 2023.Sigmoidoscopies and repeat procedures were excluded.Multivariate logistic regression analyzed associations between SSL detection and patient demographics,clinical indications,procedural factors,and comorbidities.RESULTS The overall SSL-DR was 30.7%.Multivariate analysis identified several independent predictors:Clinical indication,bowel preparation quality,inflammatory bowel disease status,and serrated polyposis syndrome.The faecal occult blood test positive(FOBT)(+)cohort showed the highest predicted SSL detection probability(39.8%),while clinical symptoms showed the lowest(22.3%).After adjustment,SSL detection odds were 2.3 times greater among FOBT(+)patients than those with clinical symptoms(adjusted odds ratio=2.30,95%confidence interval:1.20-4.40,P=0.004).CONCLUSION SSL-DR as a quality indicator requires contextualization regarding clinical indications,bowel preparation quality,and comorbidities.There was a significantly higher prevalence of SSLs in FOBT(+)patients.Despite comprehensive adjustment,this study cannot fully explain the wide SSL-DR variation in Australia,highlighting the need for standardized detection protocols and further research to ensure optimal cancer prevention outcomes.
基金supported by the National Natural Science Foundation of China(6063403060702066)+1 种基金the Aerospace Science Foundation(20090853013)Fundmental Research Foundation of NWPU(JC201015),Soaring Star of NWPU
文摘In detecting system fault algorithms,the false alarm rate and undectect rate generated by residual Chi-square test can affect the stability of filters.The paper proposes a fault detection algorithm based on sequential residual Chi-square test and applies to fault detection of an integrated navigation system.The simulation result shows that the algorithm can accurately detect the fault information of global positioning system(GPS),eliminate the influence of false alarm and missed detection on filter,and enhance fault tolerance of integrated navigation systems.
基金National Key Research and Development Project of China(No.2018YFB1701200)。
文摘Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.
文摘Hypothesis testing analysis and unknown parameter estimation of both the intermediate frequency(IF) and baseband GPS signal detection are given by using the generalized likelihood ratio test(GLRT) approach,applying the model of GPS signal in white Gaussian noise,It is proved that the test statistic follows central or noncentral F distribution,It is also pointed out that the test statistic is nearly identical to central or noncentral chi-squared distribution because the processing samples are large enough to be considered as infinite in GPS acquisition problem.It is also proved that the probability of false alarm,the probability of detection and the threshold are affected largely when the hypothesis testing refers to the full pseudorandom noise(PRN) code phase and Doppler frequency search space cells instead of each individual cell.The performance of the test statistic is also given with combining the noncoherent integration.
基金supported by the scientific and technological key project in Henan Province (No.212102210148)Open fund of Key Laboratory of Grain Information Processing and Control (No.KFJJ-2018-101)
文摘Wheat quality detection is essential to ensure the safety ofwheat circulation and storage.The traditional wheat quality detection methods mainly include artificial sensory evaluation and physicochemical index analysis,which are difficult to meet the requirements for high accuracy and efficiency in modern wheat quality detection due to the disadvantages of subjectivity,destruction of sample integrity and low efficiency.With the rapid development of optical technology,various optical-based methods,using near-infrared spectroscopy technology,hyperspectral imaging technology and terahertz,etc.,have been proposed for wheat quality detection.These methods have the characteristics of nondestructiveness and high efficiency which make them popular in wheat quality detection in recent years.In this paper,various state-of-the-art optical-based techniques of wheat quality detection are analyzed and summarized in detail.Firstly,the principle and process of common optical non-destructive detection methods for wheat quality are introduced.Then,the optical techniques used in these detection methods are divided into seven categories,and the comparison of these technologies and their advantages and disadvantages are further discussed.It shows that terahertz technology is regarded as the most promising wheat quality detection method compared with other optical detection technologies,because it can not only detect most types of wheat deterioration,but also has higher accuracy and efficiency.Finally,the research of optical technology in wheat quality detection is prospected.The future research of optical technology-based wheat quality detection mainly includes the construction of wheat quality optical detection standardization database,the fusion of multiple optical detection technologies and multiple quality index information,the improvement of the anti-interference of optical technology and the industrialization of optical inspection technology for wheat quality.These studies are of great significance to improve the detection technology of wheat and ensure the storage safety of wheat in the future.
文摘Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance philosophy used in theaircraft design methodology as well as many other operation and maintenance programsof machinery and constructions. The following study is focusing on overviewing animportant group of NDT methods: the optical and other ones, which found broadapplicability in scientific and industrial studies nowadays. The paper discusses theselected most widely applicable methods, namely, visual testing, ultrasonic testing,radiographic testing, infrared thermography as well as electronic speckle patterninterferometry and shearographic testing. Besides the basic principles of testing usingthese methods, their potential applications in various industrial and technologicalbranches are broadly discussed. The analysis as categorization of the NDT methodsprovided in this paper may help in selection of such methods in diagnosis of varioustypes of structures and defects and damage occurring in these structures.
基金supported by the Center for Innovative Grouting Materials and Technology (CIGMAT) at the University of Houston, Texas, USA
文摘The characterization of ultra-soft clayey soil exhibits extreme challenges due to low shear strength of such material.Hence,inspecting the non-destructive electrical impedance behavior of untreated and treated ultra-soft clayey soils gains more attention.Both shear strength and electrical impedance were measured experimentally for both untreated and treated ultra-soft clayey soils.The shear strength of untreated ultra-soft clayey soil reached 0.17 kPa for 10% bentonite content,while the shear strengths increased to 0.27 kPa and 6.7 kPa for 10% bentonite content treated with 2% lime and 10% polymer,respectively.The electrical impedance of the ultra-soft clayey soil has shown a significant decrease from 1.6 kΩ to 0.607 kΩ when the bentonite content increased from 2% to 10% at a frequency of 300 kHz.The10%lime and 10% polymer treatments have decreased the electrical impedances of ultra-soft clayey soil with 10%bentonite from 0.607 kΩ to 0.12 kΩ and 0.176 kΩ,respectively,at a frequency of 300 kHz.A new mathematical model has been accordingly proposed to model the non-destructive electrical impedancefrequency relationship for both untreated and treated ultra-soft clayey soils.The new model has shown a good agreement with experimental data with coefficient of determination（R;）up to 0.99 and root mean square error（RMSE） of 0.007 kΩ.
基金supported by the National Natural Science Foundation of China(61070220)the Anhui Provincial Natural Science Foundation(1408085MKL79)
文摘In recent decades,many software reliability growth models（SRGMs） have been proposed for the engineers and testers in measuring the software reliability precisely.Most of them is established based on the non-homogeneous Poisson process（NHPP）,and it is proved that the prediction accuracy of such models could be improved by adding the describing of characterization of testing effort.However,some research work indicates that the fault detection rate（FDR） is another key factor affects final software quality.Most early NHPPbased models deal with the FDR as constant or piecewise function,which does not fit the different testing stages well.Thus,this paper first incorporates a multivariate function of FDR,which is bathtub-shaped,into the NHPP-based SRGMs considering testing effort in order to further improve performance.A new model framework is proposed,and a stepwise method is used to apply the framework with real data sets to find the optimal model.Experimental studies show that the obtained new model can provide better performance of fitting and prediction compared with other traditional SRGMs.
基金Funded by National Natural Science Foundation of China(Nos.51878350,11832013,52078250)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX21_0236)。
文摘Basic magnesium sulfate cement coral aggregate concrete(MCAC)is a new type of concrete consisting of basic magnesium sulfate cement,coarse coral aggregate,coral reef sand and seawater.The rebound hammer(RH),the ultrasonic pulse velocity(UPV)and the compressive strength(fcu)tests of 14 sets of cube specimens of the MCAC after 28 d of aging were conducted.The impact of the content and length of sisal fiber on the relationship between the fcu-RH and the fcu-UPV was determined.A mathematical model was established to predict the strength of the MCAC using the UPV,RH,and comprehensive UPV/RH methods and to obtain the curves of test strength.The applicability of the test strength curves of ordinary portland concrete(OPC),light-weight aggregate concrete(LAC),and coral aggregate concrete(CAC)to MCAC was assessed.The results showed that the test strength curves of OPC,LAC and CAC were inappropriate to determine the strength of MCAC using non-destructive method.The relative standard error of the curves of test strength of the RH method and the comprehensive method met the specifications,whereas that of the UPV method did not.
