Lattice materials have demonstrated promising potential in engineering applications owing to their exceptional lightweight,high specific strength,and tunable mechanical properties.However,the traditional homogenizatio...Lattice materials have demonstrated promising potential in engineering applications owing to their exceptional lightweight,high specific strength,and tunable mechanical properties.However,the traditional homogenization methods based on the classical elasticity theory struggle to accurately describe the non-classical mechanical behaviors of lattice materials,especially when dealing with complex unit-cell geometries featured by non-symmetric configurations or non-single central node connections.In response to this limitation,this study establishes a generalized homogenization model based on the micropolar theory framework,employing Hill's boundary conditions to precisely predict the equivalent moduli of complex lattice materials.By introducing the independent rotational degree of freedom(DOF)characteristic of the micropolar theory,the proposed model successfully overcomes the limitation of conventional methods in accurately describing the asymmetric deformation and scale effects.We initially calculate the constitutive relations of two-dimensional(2D)cross-shaped multi-node chiral lattices and subsequently extend the method to three-dimensional(3D)lattices,successfully predicting the mechanical properties of both traditional and eccentric body-centered cubic(BCC)lattices.The theoretical model is validated through the finite element numerical verification which shows excellent consistency with the theoretical predictions.A further parametric study investigates the influence of geometric parameters,revealing the underlying size-effect mechanism.This paper provides a reliable theoretical tool for the design and property optimization of complex lattice materials.展开更多
The alpine grassland vegetation on the Qinghai-Tibet Plateau is composed of plant patches in varied sizes.It remains uncertain whether vegetation recovery following grazing exclusion(GE)in degraded grasslands is drive...The alpine grassland vegetation on the Qinghai-Tibet Plateau is composed of plant patches in varied sizes.It remains uncertain whether vegetation recovery following grazing exclusion(GE)in degraded grasslands is driven by increases in patches number(NP),patch size(PS),or both.We based our predictions on two hypotheses:GE intensifies plant competition,and facilitation prevails near patches while competition prevails in interpatch spaces.We predicted that the NP would remain stable or decrease and PS would increase under GE treatment.To evaluate these predictions,we conducted a study in six lightly degraded alpine grasslands under free grazing(FG)conditions in Bangor County,Xizang Autonomous Region,China,with corresponding GE treatments using transects in 2017 and 2018.Results revealed that four sites in 2017 and five sites in 2018 had reduced NP and increased PS,with probabilities of 0.033(2017)and 0.004(2018),respectively,and a joint probability of 0.0001 under the null hypothesis that GE does not affect NP or PS.The NP reduction was solely due to the decrease in small patch sizes.An increase in PS was common across species,and a predominant tendency for NP reduction was observed among species across the sites.The overall changes in NP and PS were primarily driven by the three most abundant species(contributing more than 60%in both years),rather than by shifts in floristic composition.Our findings highlight that vegetation recovery in Bangor alpine steppes following GE relies solely on the expansion of existing patches rather than the recruitment of new ones in interpatch gaps.We recommend prioritizing growth-promoting measures,such as nutrient or water management,over seed addition when assisting with GE for restoring lightly degraded grasslands.展开更多
Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study invest...Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study investigates their coupled effects using inclinedflume experiments and Discrete Element Method(DEM)simulations,covering three gravel sizes(2-5 mm,5-7 mm,7-10 mm)and four ice-content levels(0%,20%,40%,60%).Run-out distance,velocity,energy components,flow regime(Savage number),and segregation indexαwere quantified.Increasing ice content significantly enhances mobility,but with diminishing marginal effectiveness.From 0%to 40%ice content,run-out distance increases by 41%-86%,whereas the additional increase from 40%to 60%contributes only 12%-23%.Particle-size ratio strongly governs segregation intensity.Fine-gravel groups reach segregation indices ofα=0.92-0.98,indicating nearly complete upward migration of ice,whereas medium-gravel and coarse-gravel groups exhibit much weaker segregation,stabilizing atα=0.68-0.74 and 0.60-0.69.Savage number analyses reveal marked flow-regime transitions.At 0%ice content,Savage numbers reach 1.0-1.5,indicating a collisional regime.Increasing ice content suppresses collisionality,with Savage numbers decreasing to 0.03-0.07 at 60%ice content,consistent with dense-regime flow.DEM energy analyses confirm this regime shift:for finegravel mixtures,collision energy decreases by 14%,while sliding-friction energy increases by 33%as ice content increases from 0%to 60%,reflecting enhanced overburden effects imposed by upward-segregated ice layers.Medium and coarse mixtures exhibit weaker or opposite energy-shift patterns,demonstrating strong size dependence.Mechanistically,large particle-size contrasts promote strong segregation and form dense basal rock layers that increase basal friction and reduce mobility.When particle sizes are similar or ice content is high,segregation remains limited,allowing ice to mix into the basal layer,thereby reducing basal friction and enhancing mobility.This research quantitatively demonstrates how composition controls particle spatial distribution,flow regime,and energy dissipation,offering new mechanistic insights into the propagation and deposition behaviors of rock-ice avalanches and improving hazard assessment in vulnerable high-mountain regions.展开更多
Riparian dunes in deserts exhibit unique geographic features due to aeolian-fluvial interactions.In this study,we collected 510 surface sediment samples from eight drainage basins and conducted a systematic analysis t...Riparian dunes in deserts exhibit unique geographic features due to aeolian-fluvial interactions.In this study,we collected 510 surface sediment samples from eight drainage basins and conducted a systematic analysis to examine the grain size characteristics of major riparian dunes in the typical cold and arid deserts of China.The results indicate that major riparian dunes of deserts in study area can be classified into three types based on their grain size characteristics.The Bartlett test of sphericity and the Kaiser-Meyer-Olkin(KMO)test were also performed,and their significance values were found to be 0.000 and 0.584,respectively.The results of the principal component analysis revealed that the cumulative contribution rate of the total variance reached 85.9%for the two principal components with characteristic roots greater than 1.0.The primary principal component included medium sand,whereas the secondary principal component included fine sand.We conducted a cluster analysis and classified the samples into three major types.Type I rivers include the Keriya River,Langqu River,Tora River and Heihe River,which are characterized by by fine particle size,and well-sorted.Type II includes Mu Bulag River,Kuye River,and the Xar Moron River,Compared with type I,it has a relatively coarser mean grain size and relatively poor sorting for this type.Type III includes the Maquan River,which is characterized mainly by fine sand and medium sand,accounting for more than 90%,and the sorting coefficient(0.52)suggests relatively well sorting in this pattern.Moreover,principal component analysis was applied to determine the particle sizes of samples from different watersheds.Moreover,these sediments exhibit both hydromorphic and aeolian features.At the drainage basin scale,the mode and intensity of aeolian-fluvial interactions depend on climatic conditions.In arid and semi-arid climate regions,wind is the dominant force,and the grain size exhibits significant aeolian features.Conversely,in the semi-humid region,flowing water is the dominant force,and riparian dunes in this region are formed by aeolian-fluvial interaction.The angle between the wind direction and flow direction in different reaches influences both the supply of sediment sources and the development of riparian dunes.This study will provide a new perspective for evaluating aeolian-fluvial interactions on riparian dunes in the deserts of China’s cold and arid regions.展开更多
With the development of the semiconductor industry below the 7 nm scale,critical dimension small-angle X-ray scattering(CD-SAXS)has emerged as a powerful tool for quantitatively measuring nanoscale deviations.In this ...With the development of the semiconductor industry below the 7 nm scale,critical dimension small-angle X-ray scattering(CD-SAXS)has emerged as a powerful tool for quantitatively measuring nanoscale deviations.In this study,the effects of X-ray beam size and photon energy on the accuracy of critical dimension measurements were investigated.Critical dimensions measured using beams with different spot sizes showed different deviations from the expected values.Beam sizes that were either too large or too small did not improve confidence intervals.As the incident energy increased,the X-ray transmission rate increased,while the scattering cross section decreased,resulting in a gradual decrease in the signal-to-noise ratio of the diffraction peaks,which reduced the accuracy of the CD-SAXS measurements.An optimal accuracy was obtained at 12 keV with a smaller beam size.Using an effective trapezoid model,the results yielded an average pitch of 100.4±0.2 nm,width of 49.8±0.2 nm,height of 130.0±0.2 nm,and a sidewall angle below 1.1°±0.1°.These results provide crucial guidance for the future development of CD-SAXS laboratories and the construction of X-ray machines as well as robust support for research in related fields.展开更多
The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has att...The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has attracted notable attention because of its critical role in the regulation of cell adhesion and osteogenesis.However,it remains largely unclear how S S and D affect the generated bone tissue and dynamically change during long-term osteogenesis.Herein,by applying rigorous geometric mapping to minimal surfaces,we constructed precisely partitioned and layer-by-layer thickened tissue models to simulate osteogenesis across different temporal scales and thereby track the dynamic evolution of geometric characteristics,permeability,and mechanobiological tissue differentiation.The high-S S samples were found to facilitate the rapid formation of new bone tissue in the early stages.However,their smaller pores tended to cause occlusions,hindering further tissue development.In contrast,low-S S samples showed slower bone regeneration,but their larger pores provided adequate physical space for tissue regeneration and mass transport,ultimately promoting bone formation in the long term.Mechanobiological regulation suggests that fibrous tissue formation inhibits additional bone formation,establishing a dynamic equilibrium between osteogenesis and pore space to sustain nutrient/waste exchange throughout the regenerative process.Overall,smaller pores are preferable in implants for minimally loaded osteoplasty procedures focused on early-stage bone consolidation,whereas larger pores are preferable in dynamically loaded implants requiring prolonged mechanical stability.展开更多
Small angle x-ray scattering(SAXS)is an advanced technique for characterizing the particle size distribution(PSD)of nanoparticles.However,the ill-posed nature of inverse problems in SAXS data analysis often reduces th...Small angle x-ray scattering(SAXS)is an advanced technique for characterizing the particle size distribution(PSD)of nanoparticles.However,the ill-posed nature of inverse problems in SAXS data analysis often reduces the accuracy of conventional methods.This article proposes a user-friendly software for PSD analysis,GranuSAS,which employs an algorithm that integrates truncated singular value decomposition(TSVD)with the Chahine method.This approach employs TSVD for data preprocessing,generating a set of initial solutions with noise suppression.A high-quality initial solution is subsequently selected via the L-curve method.This selected candidate solution is then iteratively refined by the Chahine algorithm,enforcing constraints such as non-negativity and improving physical interpretability.Most importantly,GranuSAS employs a parallel architecture that simultaneously yields inversion results from multiple shape models and,by evaluating the accuracy of each model's reconstructed scattering curve,offers a suggestion for model selection in material systems.To systematically validate the accuracy and efficiency of the software,verification was performed using both simulated and experimental datasets.The results demonstrate that the proposed software delivers both satisfactory accuracy and reliable computational efficiency.It provides an easy-to-use and reliable tool for researchers in materials science,helping them fully exploit the potential of SAXS in nanoparticle characterization.展开更多
Bacterial cells are widely accepted as nucleation sites for calcium carbonate precipitation in biomineralization based on the Microbially Induced Carbonate Precipitation(MICP)process.For MICP-based insitu biotreatment...Bacterial cells are widely accepted as nucleation sites for calcium carbonate precipitation in biomineralization based on the Microbially Induced Carbonate Precipitation(MICP)process.For MICP-based insitu biotreatment,the firstproblem to be solved is how to introduce and retain the bacterial cells in the soil,which involves the migration and retention of bacterial cells during the biogrouting process.Soil particle size,a key factor in determining pore throat size,can have a significanteffect on the migration and retention of bacterial cells in the soil and therefore on biomineralization.To investigate the effect of particle size on the migration and retention of bacterial cells in sand and its biomineralization,two sets of tests were carried out in this study,including percolation tests and sand column treatment tests.Soil urease activity(definedas urease activity per unit mass of soil)and calcium carbonate content of the biomineralized sand were measured to comprehensively assess the migration and retention of bacterial cells in the sand.The results indicate that sands with a particle size smaller than 0.25 mmwould inhibit the migration of bacteria in the sand,resulting in a nonuniform distribution of precipitated calcium carbonate and a low strength enhancement of biomineralization.On the other hand,sands with a particle size larger than 1.18 mm are unfavorable for retaining bacterial cells in the sand,resulting in low calcium conversion efficiency.Meanwhile,particle size would also affect the formation of effective calcium carbonate through interparticle contact number and interparticle pore size,and thus biomineralization.展开更多
On January 19,2026,China's first structural interest rate cut of the year took effect.The People's Bank of China announced a 0.25 percentage point reduction in relending and rediscount rates,targeting key sect...On January 19,2026,China's first structural interest rate cut of the year took effect.The People's Bank of China announced a 0.25 percentage point reduction in relending and rediscount rates,targeting key sectors like small and micro enterprises(SMEs),technological innovation,and green transition.For the textile industry,where small and medium-sized enterprises account for over 90%of traditional manufacturing,the policy benefits will inject strong momentum into the high-quality development from multiple dimensions,including reduced financing costs,support for transformation funds,and expansion of foreign trade markets.展开更多
The scratching mechanism of polycrystallineγ-TiAl alloy was investigated at the atomic scale using the molecular dynamics method,with a focus on the influence of different grain sizes.The analysis encompassed tribolo...The scratching mechanism of polycrystallineγ-TiAl alloy was investigated at the atomic scale using the molecular dynamics method,with a focus on the influence of different grain sizes.The analysis encompassed tribological characteristics,scratch morphology,subsurface defect distribution,temperature variations,and stress states during the scratching process.The findings indicate that the scratch force,number of recovered atoms,and pile-up height exhibit abrupt changes when the critical size is 9.41 nm due to the influence of the inverse Hall-Petch effect.Variations in the number of grain boundaries and randomness of grain orientation result in different accumulation patterns on the scratch surface.Notably,single crystal materials and those with 3.73 nm in grain size display more regular surface morphology.Furthermore,smaller grain size leads to an increase in average coefficient of friction,removed atoms number,and wear rate.While it also causes higher temperatures with a larger range of distributions.Due to the barrier effect of grain boundaries,smaller grains exhibit reduced microscopic defects.Additionally,average von Mises stress and hydrostatic compressive stress at the indenter tip decrease as grain size decreases owing to grain boundary obstruction.展开更多
Liposomes serve as critical carriers for drugs and vaccines,with their biological effects influenced by their size.The microfluidic method,renowned for its precise control,reproducibility,and scalability,has been wide...Liposomes serve as critical carriers for drugs and vaccines,with their biological effects influenced by their size.The microfluidic method,renowned for its precise control,reproducibility,and scalability,has been widely employed for liposome preparation.Although some studies have explored factors affecting liposomal size in microfluidic processes,most focus on small-sized liposomes,predominantly through experimental data analysis.However,the production of larger liposomes,which are equally significant,remains underexplored.In this work,we thoroughly investigate multiple variables influencing liposome size during microfluidic preparation and develop a machine learning(ML)model capable of accurately predicting liposomal size.Experimental validation was conducted using a staggered herringbone micromixer(SHM)chip.Our findings reveal that most investigated variables significantly influence liposomal size,often interrelating in complex ways.We evaluated the predictive performance of several widely-used ML algorithms,including ensemble methods,through cross-validation(CV)for both lipo-some size and polydispersity index(PDI).A standalone dataset was experimentally validated to assess the accuracy of the ML predictions,with results indicating that ensemble algorithms provided the most reliable predictions.Specifically,gradient boosting was selected for size prediction,while random forest was employed for PDI prediction.We successfully produced uniform large(600 nm)and small(100 nm)liposomes using the optimised experimental conditions derived from the ML models.In conclusion,this study presents a robust methodology that enables precise control over liposome size distribution,of-fering valuable insights for medicinal research applications.展开更多
As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To...As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.展开更多
Understanding the fracture behavior of rocks subjected to temperature and accounting for the rock's texture is vital for safe and efficient design.Prior studies have often focused on isolated aspects of rock fract...Understanding the fracture behavior of rocks subjected to temperature and accounting for the rock's texture is vital for safe and efficient design.Prior studies have often focused on isolated aspects of rock fracture behavior,neglecting the combined influence of grain size and temperature on fracture behavior.This study employs specimens based on the particle flow code-grain based model to scrutinize the influence of temperature and grain size discrepancies on the fracture characteristics of sandstone.In pursuit of this goal,we manufactured ninety-six semi-circular bend specimens with grain sizes spanning from 0.5 mm to 1.5 mm,predicated on the mineral composition of sandstone.Recognizing the significance of intra-granular and inter-granular fractures,the grains were considered deformable and susceptible to breakage.The numerical model was calibrated using the results of uniaxial compressive strength(UCS)and Brazilian tests.We implemented thermo-mechanical coupled analysis to simulate mode Ⅰ,mode Ⅱ,and mixed mode(Ⅰ-Ⅱ)fracture toughness tests and subsequently studied alterations in the fracture behavior of sandstone at temperatures from 25℃ to 700℃.Our findings revealed increased fracture toughness as the temperature escalated from 25℃ to 200℃.However,beyond the threshold of 200℃,we noted a decline in fracture toughness.More specifically,the drop in mode Ⅰ fracture toughness was more pronounced in specimens with finer grains than those with coarser grains.Contrarily,the trend was reversed for mode Ⅱ fracture toughness.In contrast,the reduction of mixed mode(Ⅰ-Ⅱ)fracture toughness seemed almost linear across all grain sizes.Furthermore,we identified a correlation between temperature and grain size and their collective impact on crack propagation patterns.Comparing our results with established theoretical benchmarks,we confirmed that both temperature and grain size variations influence the fracture envelopes of sandstone.展开更多
It is well known that coarse-grained super-elastic NiTi shape memory alloys(SMAs)exhibit localized rather than homogeneous martensite transformation(MT),which,however,can be strongly influenced by either internal size...It is well known that coarse-grained super-elastic NiTi shape memory alloys(SMAs)exhibit localized rather than homogeneous martensite transformation(MT),which,however,can be strongly influenced by either internal size(grain size,GS)or the external size(geometric size).The coupled effect of GS and geometric size on the functional properties has not been clearly understood yet.In this work,the super-elasticity,one-way,and stress-assisted two-way shape memory effects of the polycrystalline NiTi SMAs with different aspect ratios(length/width for the gauge section)and different GSs are investigated based on the phase field method.The coupled effect of the aspect ratio and GS on the functional properties is adequately revealed.The simulated results indicate that when the aspect ratio is lower than about 4:1,the stress biaxiality and stress heterogeneity in the gauge section of the sample become more and more obvious with decreasing the aspect ratio,which can significantly influence the microstructure evolution in the process involving external stress.Therefore,the corresponding functional property is strongly dependent on the aspect ratio.With decreasing the GS and the aspect ratio(to be lower than 4:1),both the aspect ratio and GS can affect the MT or martensite reorientation in each grain and the interaction among grains.Thus,due to the strong internal constraint(i.e.,the constraint of grain boundary)and the external constraint(i.e.,the constraint of geometric boundary),the capabilities of the functional properties of NiTi SMAs are gradually weakened and highly dependent on these two factors.展开更多
A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which ca...A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.展开更多
In order to accurately evaluate the creep-fatigue lifetime of GH720Li superalloy,a lifetime prediction model was established,reflecting the interaction between creep damage and low-cycle fatigue damage.The creep-fatig...In order to accurately evaluate the creep-fatigue lifetime of GH720Li superalloy,a lifetime prediction model was established,reflecting the interaction between creep damage and low-cycle fatigue damage.The creep-fatigue lifetime prediction results of GH720Li superalloy with an average grain size of 17.3μm were essentially within a scatter band of 2 times,indicating a strong agreement between the predicted lifetimes and experimental data.Then,considering that the grain size of the dual-property turbine disc decreases from the rim to the center,a grain-size-sensitive lifetime prediction model for creep-fatigue was established by introducing the ratio of grain boundary area.The improved model overcame the limitation of most traditional prediction methods,which failed to reflect the relationship between grain size and creep-fatigue lifetime.展开更多
Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising techn...Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.展开更多
Knowing the influence of the size of datasets for regression models can help in improving the accuracy of a solar power forecast and make the most out of renewable energy systems.This research explores the influence o...Knowing the influence of the size of datasets for regression models can help in improving the accuracy of a solar power forecast and make the most out of renewable energy systems.This research explores the influence of dataset size on the accuracy and reliability of regression models for solar power prediction,contributing to better forecasting methods.The study analyzes data from two solar panels,aSiMicro03036 and aSiTandem72-46,over 7,14,17,21,28,and 38 days,with each dataset comprising five independent and one dependent parameter,and split 80–20 for training and testing.Results indicate that Random Forest consistently outperforms other models,achieving the highest correlation coefficient of 0.9822 and the lowest Mean Absolute Error(MAE)of 2.0544 on the aSiTandem72-46 panel with 21 days of data.For the aSiMicro03036 panel,the best MAE of 4.2978 was reached using the k-Nearest Neighbor(k-NN)algorithm,which was set up as instance-based k-Nearest neighbors(IBk)in Weka after being trained on 17 days of data.Regression performance for most models(excluding IBk)stabilizes at 14 days or more.Compared to the 7-day dataset,increasing to 21 days reduced the MAE by around 20%and improved correlation coefficients by around 2.1%,highlighting the value of moderate dataset expansion.These findings suggest that datasets spanning 17 to 21 days,with 80%used for training,can significantly enhance the predictive accuracy of solar power generation models.展开更多
The characteristics of summertime raindrop size distribution(DSD) and associated relations in the semi-arid region over the Inner Mongolian Plateau(IMP) were investigated,utilizing five-year continuous observations by...The characteristics of summertime raindrop size distribution(DSD) and associated relations in the semi-arid region over the Inner Mongolian Plateau(IMP) were investigated,utilizing five-year continuous observations by a PARSIVEL2disdrometer in East Ujimqin County(EUC),China.It is found that only 7.94% of the 15 664 one-min precipitation samples meet classification criteria as convective rain(CR),but its contribution to the total rainfall amount is 63.87%.Notably,40.72% of the rainfall comes from large-sized raindrops(D> 3 mm),despite the fact that large-sized raindrops account for only 1.73% of the CR total number concentration.Further results show that the mean value of mass-weighted mean diameters(Dm) is larger(2.43 mm) and generalized intercepts(lgN_(W)) is lower(3.19) in CR,aligning with a "continentallike" cluster,which is mainly influenced by the joint impact of in-cloud ice-based processes and the below-cloud environmental background.Also,the empirical relationships of shape-slope(μ-Λ),radar reflectivity-rain rate(Z-R),and rainfall kinetic energy(KE_(time)-Rand KE_(time)-Z) are localized.To quantitatively analyze the impact of DSD parameters on kinetic energy estimation,power-law KE_(time)-R and KE_(time)-Z relationships are derived based on the normalized gamma distribution.N_(W)takes precedence over μ in affecting variabilities of multiplicative coefficients,especially for KE_(time)-R relationship where the multiplicative coefficient is proportional to N_(W)^(-0.287).It should be noted that although the proportion of CR occurring throughout the summer is small,raindrops with lower N_(W) and larger Dmwill generate higher KE_(time),which will bring a higher potential risk of soil erosion in semi-arid regions over IMP.展开更多
The influence of graphene platelets(GPLs)on the WC grain size of WC-Co-GPLs cemented carbide prepared by low-pressure sintering was investigated.The role of GPLs in refining WC grains was explored by characterizing gr...The influence of graphene platelets(GPLs)on the WC grain size of WC-Co-GPLs cemented carbide prepared by low-pressure sintering was investigated.The role of GPLs in refining WC grains was explored by characterizing grain size and phase distribution.Results show that the addition of GPLs leads to significant grain refinement of WC and the more uniform distribution of WC grain size.When the content of GPLs is 0.10wt%,the average WC grain size in the cemented carbide is 0.39μm,which is 32%lower than that in WC-Co.However,the shape of WC grains is almost unaffected,while the mean free path of Co decreases.The grain refinement of WC is attributed to the homogeneous distribution of GPLs between WC/WC and WC/Co grain boundaries,which hinders the solution and precipitation process of WC in liquid phase Co,as well as the migration and growth of WC grains.Additionally,GPLs can serve as heat transfer plates in materials to improve cooling efficiency,thus inhibiting the growth of WC grain.展开更多
基金Project supported by the National Natural Science Foundation of China(No.12472077)the supports from Shanghai Gaofeng Project for University Academic Program Development,Fundamental Research Funds for the Central Universities(No.22120240353).
文摘Lattice materials have demonstrated promising potential in engineering applications owing to their exceptional lightweight,high specific strength,and tunable mechanical properties.However,the traditional homogenization methods based on the classical elasticity theory struggle to accurately describe the non-classical mechanical behaviors of lattice materials,especially when dealing with complex unit-cell geometries featured by non-symmetric configurations or non-single central node connections.In response to this limitation,this study establishes a generalized homogenization model based on the micropolar theory framework,employing Hill's boundary conditions to precisely predict the equivalent moduli of complex lattice materials.By introducing the independent rotational degree of freedom(DOF)characteristic of the micropolar theory,the proposed model successfully overcomes the limitation of conventional methods in accurately describing the asymmetric deformation and scale effects.We initially calculate the constitutive relations of two-dimensional(2D)cross-shaped multi-node chiral lattices and subsequently extend the method to three-dimensional(3D)lattices,successfully predicting the mechanical properties of both traditional and eccentric body-centered cubic(BCC)lattices.The theoretical model is validated through the finite element numerical verification which shows excellent consistency with the theoretical predictions.A further parametric study investigates the influence of geometric parameters,revealing the underlying size-effect mechanism.This paper provides a reliable theoretical tool for the design and property optimization of complex lattice materials.
基金financially supported by the Science and Technology Bureau of Ali Prefecture,project named“Assessing the Carbon Sequestration and Carbon Sink Enhancement Potential of Natural Ecosystems in Ali Region(QYXTZX-AL2022-05)”。
文摘The alpine grassland vegetation on the Qinghai-Tibet Plateau is composed of plant patches in varied sizes.It remains uncertain whether vegetation recovery following grazing exclusion(GE)in degraded grasslands is driven by increases in patches number(NP),patch size(PS),or both.We based our predictions on two hypotheses:GE intensifies plant competition,and facilitation prevails near patches while competition prevails in interpatch spaces.We predicted that the NP would remain stable or decrease and PS would increase under GE treatment.To evaluate these predictions,we conducted a study in six lightly degraded alpine grasslands under free grazing(FG)conditions in Bangor County,Xizang Autonomous Region,China,with corresponding GE treatments using transects in 2017 and 2018.Results revealed that four sites in 2017 and five sites in 2018 had reduced NP and increased PS,with probabilities of 0.033(2017)and 0.004(2018),respectively,and a joint probability of 0.0001 under the null hypothesis that GE does not affect NP or PS.The NP reduction was solely due to the decrease in small patch sizes.An increase in PS was common across species,and a predominant tendency for NP reduction was observed among species across the sites.The overall changes in NP and PS were primarily driven by the three most abundant species(contributing more than 60%in both years),rather than by shifts in floristic composition.Our findings highlight that vegetation recovery in Bangor alpine steppes following GE relies solely on the expansion of existing patches rather than the recruitment of new ones in interpatch gaps.We recommend prioritizing growth-promoting measures,such as nutrient or water management,over seed addition when assisting with GE for restoring lightly degraded grasslands.
基金funded by the Natural Science Foundation of China(Grants No 42277127)。
文摘Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study investigates their coupled effects using inclinedflume experiments and Discrete Element Method(DEM)simulations,covering three gravel sizes(2-5 mm,5-7 mm,7-10 mm)and four ice-content levels(0%,20%,40%,60%).Run-out distance,velocity,energy components,flow regime(Savage number),and segregation indexαwere quantified.Increasing ice content significantly enhances mobility,but with diminishing marginal effectiveness.From 0%to 40%ice content,run-out distance increases by 41%-86%,whereas the additional increase from 40%to 60%contributes only 12%-23%.Particle-size ratio strongly governs segregation intensity.Fine-gravel groups reach segregation indices ofα=0.92-0.98,indicating nearly complete upward migration of ice,whereas medium-gravel and coarse-gravel groups exhibit much weaker segregation,stabilizing atα=0.68-0.74 and 0.60-0.69.Savage number analyses reveal marked flow-regime transitions.At 0%ice content,Savage numbers reach 1.0-1.5,indicating a collisional regime.Increasing ice content suppresses collisionality,with Savage numbers decreasing to 0.03-0.07 at 60%ice content,consistent with dense-regime flow.DEM energy analyses confirm this regime shift:for finegravel mixtures,collision energy decreases by 14%,while sliding-friction energy increases by 33%as ice content increases from 0%to 60%,reflecting enhanced overburden effects imposed by upward-segregated ice layers.Medium and coarse mixtures exhibit weaker or opposite energy-shift patterns,demonstrating strong size dependence.Mechanistically,large particle-size contrasts promote strong segregation and form dense basal rock layers that increase basal friction and reduce mobility.When particle sizes are similar or ice content is high,segregation remains limited,allowing ice to mix into the basal layer,thereby reducing basal friction and enhancing mobility.This research quantitatively demonstrates how composition controls particle spatial distribution,flow regime,and energy dissipation,offering new mechanistic insights into the propagation and deposition behaviors of rock-ice avalanches and improving hazard assessment in vulnerable high-mountain regions.
基金Under the auspices of the General Project of Science and Technology Department of Shaanxi Province(No.2023-JCYB-264)General Program of National Natural Science Foundation of China(No.41801004,42371008,42471012)。
文摘Riparian dunes in deserts exhibit unique geographic features due to aeolian-fluvial interactions.In this study,we collected 510 surface sediment samples from eight drainage basins and conducted a systematic analysis to examine the grain size characteristics of major riparian dunes in the typical cold and arid deserts of China.The results indicate that major riparian dunes of deserts in study area can be classified into three types based on their grain size characteristics.The Bartlett test of sphericity and the Kaiser-Meyer-Olkin(KMO)test were also performed,and their significance values were found to be 0.000 and 0.584,respectively.The results of the principal component analysis revealed that the cumulative contribution rate of the total variance reached 85.9%for the two principal components with characteristic roots greater than 1.0.The primary principal component included medium sand,whereas the secondary principal component included fine sand.We conducted a cluster analysis and classified the samples into three major types.Type I rivers include the Keriya River,Langqu River,Tora River and Heihe River,which are characterized by by fine particle size,and well-sorted.Type II includes Mu Bulag River,Kuye River,and the Xar Moron River,Compared with type I,it has a relatively coarser mean grain size and relatively poor sorting for this type.Type III includes the Maquan River,which is characterized mainly by fine sand and medium sand,accounting for more than 90%,and the sorting coefficient(0.52)suggests relatively well sorting in this pattern.Moreover,principal component analysis was applied to determine the particle sizes of samples from different watersheds.Moreover,these sediments exhibit both hydromorphic and aeolian features.At the drainage basin scale,the mode and intensity of aeolian-fluvial interactions depend on climatic conditions.In arid and semi-arid climate regions,wind is the dominant force,and the grain size exhibits significant aeolian features.Conversely,in the semi-humid region,flowing water is the dominant force,and riparian dunes in this region are formed by aeolian-fluvial interaction.The angle between the wind direction and flow direction in different reaches influences both the supply of sediment sources and the development of riparian dunes.This study will provide a new perspective for evaluating aeolian-fluvial interactions on riparian dunes in the deserts of China’s cold and arid regions.
基金supported by the National Natural Science Foundation of China(No.12175295)the National Key R&D Program of China(2021YFA1601000)the Shanghai Municipal Science and Technology Major Project。
文摘With the development of the semiconductor industry below the 7 nm scale,critical dimension small-angle X-ray scattering(CD-SAXS)has emerged as a powerful tool for quantitatively measuring nanoscale deviations.In this study,the effects of X-ray beam size and photon energy on the accuracy of critical dimension measurements were investigated.Critical dimensions measured using beams with different spot sizes showed different deviations from the expected values.Beam sizes that were either too large or too small did not improve confidence intervals.As the incident energy increased,the X-ray transmission rate increased,while the scattering cross section decreased,resulting in a gradual decrease in the signal-to-noise ratio of the diffraction peaks,which reduced the accuracy of the CD-SAXS measurements.An optimal accuracy was obtained at 12 keV with a smaller beam size.Using an effective trapezoid model,the results yielded an average pitch of 100.4±0.2 nm,width of 49.8±0.2 nm,height of 130.0±0.2 nm,and a sidewall angle below 1.1°±0.1°.These results provide crucial guidance for the future development of CD-SAXS laboratories and the construction of X-ray machines as well as robust support for research in related fields.
基金financial support from the National Natural Science Foundation of China(No.52035012)the Guangdong Basic and Applied Basic Research Foundation(No.2025A1515012203)。
文摘The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has attracted notable attention because of its critical role in the regulation of cell adhesion and osteogenesis.However,it remains largely unclear how S S and D affect the generated bone tissue and dynamically change during long-term osteogenesis.Herein,by applying rigorous geometric mapping to minimal surfaces,we constructed precisely partitioned and layer-by-layer thickened tissue models to simulate osteogenesis across different temporal scales and thereby track the dynamic evolution of geometric characteristics,permeability,and mechanobiological tissue differentiation.The high-S S samples were found to facilitate the rapid formation of new bone tissue in the early stages.However,their smaller pores tended to cause occlusions,hindering further tissue development.In contrast,low-S S samples showed slower bone regeneration,but their larger pores provided adequate physical space for tissue regeneration and mass transport,ultimately promoting bone formation in the long term.Mechanobiological regulation suggests that fibrous tissue formation inhibits additional bone formation,establishing a dynamic equilibrium between osteogenesis and pore space to sustain nutrient/waste exchange throughout the regenerative process.Overall,smaller pores are preferable in implants for minimally loaded osteoplasty procedures focused on early-stage bone consolidation,whereas larger pores are preferable in dynamically loaded implants requiring prolonged mechanical stability.
基金Project supported by the Project of the Anhui Provincial Natural Science Foundation(Grant No.2308085MA19)Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA0410401)+2 种基金the National Natural Science Foundation of China(Grant No.52202120)the National Key Research and Development Program of China(Grant No.2023YFA1609800)USTC Research Funds of the Double First-Class Initiative(Grant No.YD2310002013)。
文摘Small angle x-ray scattering(SAXS)is an advanced technique for characterizing the particle size distribution(PSD)of nanoparticles.However,the ill-posed nature of inverse problems in SAXS data analysis often reduces the accuracy of conventional methods.This article proposes a user-friendly software for PSD analysis,GranuSAS,which employs an algorithm that integrates truncated singular value decomposition(TSVD)with the Chahine method.This approach employs TSVD for data preprocessing,generating a set of initial solutions with noise suppression.A high-quality initial solution is subsequently selected via the L-curve method.This selected candidate solution is then iteratively refined by the Chahine algorithm,enforcing constraints such as non-negativity and improving physical interpretability.Most importantly,GranuSAS employs a parallel architecture that simultaneously yields inversion results from multiple shape models and,by evaluating the accuracy of each model's reconstructed scattering curve,offers a suggestion for model selection in material systems.To systematically validate the accuracy and efficiency of the software,verification was performed using both simulated and experimental datasets.The results demonstrate that the proposed software delivers both satisfactory accuracy and reliable computational efficiency.It provides an easy-to-use and reliable tool for researchers in materials science,helping them fully exploit the potential of SAXS in nanoparticle characterization.
基金support by the National Natural Science Foundation of China(NSFC)(Grant Nos.52178319,42477160,52338007).
文摘Bacterial cells are widely accepted as nucleation sites for calcium carbonate precipitation in biomineralization based on the Microbially Induced Carbonate Precipitation(MICP)process.For MICP-based insitu biotreatment,the firstproblem to be solved is how to introduce and retain the bacterial cells in the soil,which involves the migration and retention of bacterial cells during the biogrouting process.Soil particle size,a key factor in determining pore throat size,can have a significanteffect on the migration and retention of bacterial cells in the soil and therefore on biomineralization.To investigate the effect of particle size on the migration and retention of bacterial cells in sand and its biomineralization,two sets of tests were carried out in this study,including percolation tests and sand column treatment tests.Soil urease activity(definedas urease activity per unit mass of soil)and calcium carbonate content of the biomineralized sand were measured to comprehensively assess the migration and retention of bacterial cells in the sand.The results indicate that sands with a particle size smaller than 0.25 mmwould inhibit the migration of bacteria in the sand,resulting in a nonuniform distribution of precipitated calcium carbonate and a low strength enhancement of biomineralization.On the other hand,sands with a particle size larger than 1.18 mm are unfavorable for retaining bacterial cells in the sand,resulting in low calcium conversion efficiency.Meanwhile,particle size would also affect the formation of effective calcium carbonate through interparticle contact number and interparticle pore size,and thus biomineralization.
文摘On January 19,2026,China's first structural interest rate cut of the year took effect.The People's Bank of China announced a 0.25 percentage point reduction in relending and rediscount rates,targeting key sectors like small and micro enterprises(SMEs),technological innovation,and green transition.For the textile industry,where small and medium-sized enterprises account for over 90%of traditional manufacturing,the policy benefits will inject strong momentum into the high-quality development from multiple dimensions,including reduced financing costs,support for transformation funds,and expansion of foreign trade markets.
基金National Natural Science Foundation of China(52065036,52365018)Natural Science Foundation of Gansu(23JRRA760)+1 种基金Hongliu Outstanding Youth Foundation of Lanzhou University of TechnologyChina Postdoctoral Science Foundation(2023M733583)。
文摘The scratching mechanism of polycrystallineγ-TiAl alloy was investigated at the atomic scale using the molecular dynamics method,with a focus on the influence of different grain sizes.The analysis encompassed tribological characteristics,scratch morphology,subsurface defect distribution,temperature variations,and stress states during the scratching process.The findings indicate that the scratch force,number of recovered atoms,and pile-up height exhibit abrupt changes when the critical size is 9.41 nm due to the influence of the inverse Hall-Petch effect.Variations in the number of grain boundaries and randomness of grain orientation result in different accumulation patterns on the scratch surface.Notably,single crystal materials and those with 3.73 nm in grain size display more regular surface morphology.Furthermore,smaller grain size leads to an increase in average coefficient of friction,removed atoms number,and wear rate.While it also causes higher temperatures with a larger range of distributions.Due to the barrier effect of grain boundaries,smaller grains exhibit reduced microscopic defects.Additionally,average von Mises stress and hydrostatic compressive stress at the indenter tip decrease as grain size decreases owing to grain boundary obstruction.
基金supported by the National Key Research and Development Plan of the Ministry of Science and Technology,China(Grant No.:2022YFE0125300)the National Natural Science Foundation of China(Grant No:81690262)+2 种基金the National Science and Technology Major Project,China(Grant No.:2017ZX09201004-021)the Open Project of National facility for Translational Medicine(Shanghai),China(Grant No.:TMSK-2021-104)Shanghai Jiao Tong University STAR Grant,China(Grant Nos.:YG2022ZD024 and YG2022QN111).
文摘Liposomes serve as critical carriers for drugs and vaccines,with their biological effects influenced by their size.The microfluidic method,renowned for its precise control,reproducibility,and scalability,has been widely employed for liposome preparation.Although some studies have explored factors affecting liposomal size in microfluidic processes,most focus on small-sized liposomes,predominantly through experimental data analysis.However,the production of larger liposomes,which are equally significant,remains underexplored.In this work,we thoroughly investigate multiple variables influencing liposome size during microfluidic preparation and develop a machine learning(ML)model capable of accurately predicting liposomal size.Experimental validation was conducted using a staggered herringbone micromixer(SHM)chip.Our findings reveal that most investigated variables significantly influence liposomal size,often interrelating in complex ways.We evaluated the predictive performance of several widely-used ML algorithms,including ensemble methods,through cross-validation(CV)for both lipo-some size and polydispersity index(PDI).A standalone dataset was experimentally validated to assess the accuracy of the ML predictions,with results indicating that ensemble algorithms provided the most reliable predictions.Specifically,gradient boosting was selected for size prediction,while random forest was employed for PDI prediction.We successfully produced uniform large(600 nm)and small(100 nm)liposomes using the optimised experimental conditions derived from the ML models.In conclusion,this study presents a robust methodology that enables precise control over liposome size distribution,of-fering valuable insights for medicinal research applications.
基金supported by the National Natural Science Foundation of China(Nos.52222110,52401354,and 52301353).
文摘As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.
文摘Understanding the fracture behavior of rocks subjected to temperature and accounting for the rock's texture is vital for safe and efficient design.Prior studies have often focused on isolated aspects of rock fracture behavior,neglecting the combined influence of grain size and temperature on fracture behavior.This study employs specimens based on the particle flow code-grain based model to scrutinize the influence of temperature and grain size discrepancies on the fracture characteristics of sandstone.In pursuit of this goal,we manufactured ninety-six semi-circular bend specimens with grain sizes spanning from 0.5 mm to 1.5 mm,predicated on the mineral composition of sandstone.Recognizing the significance of intra-granular and inter-granular fractures,the grains were considered deformable and susceptible to breakage.The numerical model was calibrated using the results of uniaxial compressive strength(UCS)and Brazilian tests.We implemented thermo-mechanical coupled analysis to simulate mode Ⅰ,mode Ⅱ,and mixed mode(Ⅰ-Ⅱ)fracture toughness tests and subsequently studied alterations in the fracture behavior of sandstone at temperatures from 25℃ to 700℃.Our findings revealed increased fracture toughness as the temperature escalated from 25℃ to 200℃.However,beyond the threshold of 200℃,we noted a decline in fracture toughness.More specifically,the drop in mode Ⅰ fracture toughness was more pronounced in specimens with finer grains than those with coarser grains.Contrarily,the trend was reversed for mode Ⅱ fracture toughness.In contrast,the reduction of mixed mode(Ⅰ-Ⅱ)fracture toughness seemed almost linear across all grain sizes.Furthermore,we identified a correlation between temperature and grain size and their collective impact on crack propagation patterns.Comparing our results with established theoretical benchmarks,we confirmed that both temperature and grain size variations influence the fracture envelopes of sandstone.
基金supported by the National Natural Science Foundation of China (Grant Nos.12202294 and 12022208)the Project funded by China Postdoctoral Science Foundation (Grant No.2022M712243)the Fundamental Research Funds for the Central Universities (Grant No.2023SCU12098).
文摘It is well known that coarse-grained super-elastic NiTi shape memory alloys(SMAs)exhibit localized rather than homogeneous martensite transformation(MT),which,however,can be strongly influenced by either internal size(grain size,GS)or the external size(geometric size).The coupled effect of GS and geometric size on the functional properties has not been clearly understood yet.In this work,the super-elasticity,one-way,and stress-assisted two-way shape memory effects of the polycrystalline NiTi SMAs with different aspect ratios(length/width for the gauge section)and different GSs are investigated based on the phase field method.The coupled effect of the aspect ratio and GS on the functional properties is adequately revealed.The simulated results indicate that when the aspect ratio is lower than about 4:1,the stress biaxiality and stress heterogeneity in the gauge section of the sample become more and more obvious with decreasing the aspect ratio,which can significantly influence the microstructure evolution in the process involving external stress.Therefore,the corresponding functional property is strongly dependent on the aspect ratio.With decreasing the GS and the aspect ratio(to be lower than 4:1),both the aspect ratio and GS can affect the MT or martensite reorientation in each grain and the interaction among grains.Thus,due to the strong internal constraint(i.e.,the constraint of grain boundary)and the external constraint(i.e.,the constraint of geometric boundary),the capabilities of the functional properties of NiTi SMAs are gradually weakened and highly dependent on these two factors.
基金supported in part by financial support from the National Key R&D Program of China(No.2023YFB3407003)the National Natural Science Foundation of China(No.52375378).
文摘A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.
基金financially supported by the National Natural Science Foundation of China(Nos.52306183,12272245,11832007,12172238)the Natural Science Foundation of Zhejiang Province,China(No.LQ23E050022)+1 种基金the Natural Science Foundation of Sichuan Province,China(Nos.2022NSFSC0324,2022JDJQ0011)the Open Project of Failure Mechanics and Engineering Disaster Prevention,Key Laboratory of Sichuan Province,China(No.FMEDP202305)。
文摘In order to accurately evaluate the creep-fatigue lifetime of GH720Li superalloy,a lifetime prediction model was established,reflecting the interaction between creep damage and low-cycle fatigue damage.The creep-fatigue lifetime prediction results of GH720Li superalloy with an average grain size of 17.3μm were essentially within a scatter band of 2 times,indicating a strong agreement between the predicted lifetimes and experimental data.Then,considering that the grain size of the dual-property turbine disc decreases from the rim to the center,a grain-size-sensitive lifetime prediction model for creep-fatigue was established by introducing the ratio of grain boundary area.The improved model overcame the limitation of most traditional prediction methods,which failed to reflect the relationship between grain size and creep-fatigue lifetime.
基金the National Natural Science Foundation of China(No.52205468)China Postdoctoral Science Foundation(No.2022M710061 and No.2023T160277)Natural Science Foundation of Jiangsu Province(No.BK20210755)。
文摘Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.
文摘Knowing the influence of the size of datasets for regression models can help in improving the accuracy of a solar power forecast and make the most out of renewable energy systems.This research explores the influence of dataset size on the accuracy and reliability of regression models for solar power prediction,contributing to better forecasting methods.The study analyzes data from two solar panels,aSiMicro03036 and aSiTandem72-46,over 7,14,17,21,28,and 38 days,with each dataset comprising five independent and one dependent parameter,and split 80–20 for training and testing.Results indicate that Random Forest consistently outperforms other models,achieving the highest correlation coefficient of 0.9822 and the lowest Mean Absolute Error(MAE)of 2.0544 on the aSiTandem72-46 panel with 21 days of data.For the aSiMicro03036 panel,the best MAE of 4.2978 was reached using the k-Nearest Neighbor(k-NN)algorithm,which was set up as instance-based k-Nearest neighbors(IBk)in Weka after being trained on 17 days of data.Regression performance for most models(excluding IBk)stabilizes at 14 days or more.Compared to the 7-day dataset,increasing to 21 days reduced the MAE by around 20%and improved correlation coefficients by around 2.1%,highlighting the value of moderate dataset expansion.These findings suggest that datasets spanning 17 to 21 days,with 80%used for training,can significantly enhance the predictive accuracy of solar power generation models.
基金supported by the National Natural Science Foundation of China(Grant Nos.42325503,42075063,42075066,and 42021004)the Hubei Provincial Natural Science Foundation and the Meteorological Innovation and Development Project of China(Grant No.2023AFD096)the Beijige Foundation of NJIAS(Grant No.BJG202304).
文摘The characteristics of summertime raindrop size distribution(DSD) and associated relations in the semi-arid region over the Inner Mongolian Plateau(IMP) were investigated,utilizing five-year continuous observations by a PARSIVEL2disdrometer in East Ujimqin County(EUC),China.It is found that only 7.94% of the 15 664 one-min precipitation samples meet classification criteria as convective rain(CR),but its contribution to the total rainfall amount is 63.87%.Notably,40.72% of the rainfall comes from large-sized raindrops(D> 3 mm),despite the fact that large-sized raindrops account for only 1.73% of the CR total number concentration.Further results show that the mean value of mass-weighted mean diameters(Dm) is larger(2.43 mm) and generalized intercepts(lgN_(W)) is lower(3.19) in CR,aligning with a "continentallike" cluster,which is mainly influenced by the joint impact of in-cloud ice-based processes and the below-cloud environmental background.Also,the empirical relationships of shape-slope(μ-Λ),radar reflectivity-rain rate(Z-R),and rainfall kinetic energy(KE_(time)-Rand KE_(time)-Z) are localized.To quantitatively analyze the impact of DSD parameters on kinetic energy estimation,power-law KE_(time)-R and KE_(time)-Z relationships are derived based on the normalized gamma distribution.N_(W)takes precedence over μ in affecting variabilities of multiplicative coefficients,especially for KE_(time)-R relationship where the multiplicative coefficient is proportional to N_(W)^(-0.287).It should be noted that although the proportion of CR occurring throughout the summer is small,raindrops with lower N_(W) and larger Dmwill generate higher KE_(time),which will bring a higher potential risk of soil erosion in semi-arid regions over IMP.
基金National Natural Science Foundation of China(51572224)Guangdong Young Creative Talents(2023KQNCX039)+2 种基金Guangdong Basic and Applied Basic Research Foundation(2023A1515110551)Innovative Team in Higher Educational Institutions of Guangdong Province(2020KCXTD039)2023 Lingnan Normal College Students Innovation and Entrepreneurship Training Program(1742)。
文摘The influence of graphene platelets(GPLs)on the WC grain size of WC-Co-GPLs cemented carbide prepared by low-pressure sintering was investigated.The role of GPLs in refining WC grains was explored by characterizing grain size and phase distribution.Results show that the addition of GPLs leads to significant grain refinement of WC and the more uniform distribution of WC grain size.When the content of GPLs is 0.10wt%,the average WC grain size in the cemented carbide is 0.39μm,which is 32%lower than that in WC-Co.However,the shape of WC grains is almost unaffected,while the mean free path of Co decreases.The grain refinement of WC is attributed to the homogeneous distribution of GPLs between WC/WC and WC/Co grain boundaries,which hinders the solution and precipitation process of WC in liquid phase Co,as well as the migration and growth of WC grains.Additionally,GPLs can serve as heat transfer plates in materials to improve cooling efficiency,thus inhibiting the growth of WC grain.
