Laser gas nitriding （LGN） is a common surface modification method to enhance the wear resistance of titanium （Ti） alloys, which are known to have poor tribological properties. In the present study, a titanium nitr...Laser gas nitriding （LGN） is a common surface modification method to enhance the wear resistance of titanium （Ti） alloys, which are known to have poor tribological properties. In the present study, a titanium nitride （TIN） grid network was fabricated on the surface of nickel titanium （NiTi） by LGN. The laser processing parameters were selected to achieve nitriding without surface melting and hence to＇maintain a smooth surface finish. The characteristics of the grid-nitrided samples were investigated by scanningelectron microscopy, X-ray diffractometry, optical microscopy, 2-D profilometry, contact angle measurements and nanoindentation. The wear resistance of the nitrided samples was evaluated using reciprocating wear test against ultra-high-molecular-weight polyethylene （UHMWPE） in Hanks＇ solution. The results indicate that the wear rates of the grid-nitrided samples and the UHMWPE counter-body in the wear pair are both significantly reduced. The decrease in wear rates can be attributed to the combination of a hard TiN grid and a soft NiTi substrate. In Hanks＇ solution, the higher hydrophilicity of the nitrided samples also contributes to the better performance in wear test against hydrophobic UHMWPE.展开更多
The continuous miniaturization and high-power development of electronic devices have given rise to severe interface thermal issues,which urgently demand highly thermally conductive thermal interface materials(TIMs)to ...The continuous miniaturization and high-power development of electronic devices have given rise to severe interface thermal issues,which urgently demand highly thermally conductive thermal interface materials(TIMs)to eliminate excessive heat accumulation and ensure the normal operation of devices[1].展开更多
基金supported by the Research Grants Council of the Hong Kong Special Administrative Region,China(Project No.PolyU524210E)
文摘Laser gas nitriding （LGN） is a common surface modification method to enhance the wear resistance of titanium （Ti） alloys, which are known to have poor tribological properties. In the present study, a titanium nitride （TIN） grid network was fabricated on the surface of nickel titanium （NiTi） by LGN. The laser processing parameters were selected to achieve nitriding without surface melting and hence to＇maintain a smooth surface finish. The characteristics of the grid-nitrided samples were investigated by scanningelectron microscopy, X-ray diffractometry, optical microscopy, 2-D profilometry, contact angle measurements and nanoindentation. The wear resistance of the nitrided samples was evaluated using reciprocating wear test against ultra-high-molecular-weight polyethylene （UHMWPE） in Hanks＇ solution. The results indicate that the wear rates of the grid-nitrided samples and the UHMWPE counter-body in the wear pair are both significantly reduced. The decrease in wear rates can be attributed to the combination of a hard TiN grid and a soft NiTi substrate. In Hanks＇ solution, the higher hydrophilicity of the nitrided samples also contributes to the better performance in wear test against hydrophobic UHMWPE.
文摘The continuous miniaturization and high-power development of electronic devices have given rise to severe interface thermal issues,which urgently demand highly thermally conductive thermal interface materials(TIMs)to eliminate excessive heat accumulation and ensure the normal operation of devices[1].
