Exploring efficient transition-metal-based electrocatalysts is critical for the wide application of electrochemical hydrogen generation technology.Although the phase displays prominent influence on their performance,i...Exploring efficient transition-metal-based electrocatalysts is critical for the wide application of electrochemical hydrogen generation technology.Although the phase displays prominent influence on their performance,it remains a major challenge to achieve phase regulation in the same synthesis method and elucidate the intrinsic relationship between the phase and activity.Herein,we developed a sulfur induced electrodeposition strategy to achieve the precise phase regulation of nickel-based materials from Ni(OH)_(2)to Ni and Ni_(3)S_(2).S atoms can be introduced into Ni and Ni(OH)_(2)due to sulfur inducement,and the S proportion is finely controlled via changing the deposition parameters.Importantly,the obtained S-Ni catalyst displays enhanced hydrogen evolution activity with an ultralow overpotential of 27 mV at 10 mA cm^(-2),which is superior to the S-Ni(OH)_(2),Ni_(3)S_(2),and even Pt/C.Density functional theory(DFT)calculations disclose the S-Ni catalyst exhibits optimal charge state and local coordination,remarkably optimizing the water adsorption and Ni-H^(*)binding energy.This work provides new insights into phase regulation in electrodeposition and an understanding of the intrinsic relationship between phase and activity.展开更多
Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon ...Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.展开更多
Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of va...Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.展开更多
The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.Howeve...The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.However,this pursuit has been fundamentally hindered by the absence of transformative battery materials capable of delivering the necessary electrochemical functions,robust interface adhesion,and,crucially,the suitable rheological properties required for on-demand shaping.In this work,we introduce a concept of a multifunctional plasticine electrode matrix(PEM)featuring nano-interpenetrating networks(nano-IPN)to address this challenge.Utilizing the nonflammable liquid-electrolyte hydration combined with conductive nanomaterials,we have realized a PEM in the form of a multifunctional nanocomposite that integrates ion and electron conduction,component binding,non-flammability,and plasticine-like moldability.With this PEM,we have successfully fabricated a variety of bulk-flexible electrodes with high mass loading of active material(AM)(>70 wt%)using industry-friendly extrusion and compression molding techniques.Moreover,these high AM-loading composite electrodes achieve an unparalleled bulk conformability and flexibility,remaining structurally intact even under severe mechanical stress.Ultimately,we have successfully produced shape-patternable and flexible batteries via extrusion molding.This study underscores the potential of the PEM to revolutionize battery microstructures,interfaces,manufacturing processes,and performance characteristics.展开更多
Metals,indispensable since the Bronze Age,remain pivotal in modern technologies due to their exceptional properties and versatility.Beyond traditional machining,advanced nano/micro-machining techniques enable the fabr...Metals,indispensable since the Bronze Age,remain pivotal in modern technologies due to their exceptional properties and versatility.Beyond traditional machining,advanced nano/micro-machining techniques enable the fabrication of metallic nano/micro structures with high precision in shape,size,and pattern.These structures endow flexible electrodes with outstanding electrical,mechanical,optical,and electrochemical performance,enabling growing applications in flexible optoelectronics,epidermal electronics,energy harvesting,and biochemical sensing.This review provides a comprehensive overview of the fabrication strategies for flexible electrodes made from metal meshes,metal nanowires,and liquid metals.The current advancements,existing challenges,and emerging technologies are systematically discussed.Furthermore,the progression toward ultra-thin,soft epidermal electrodes is explored,with an emphasis on novel in situ and transfer fabrication methods.We examine the underlying mechanisms,performance indicators,and their integration for on-skin applications,including bioelectric sensing,electrical stimulation,and energy harvesting.Finally,we highlight the remaining challenges in performance improvement and industrialization of flexible and epidermal electrodes,along with future opportunities for integrating multimodal systems and leveraging artificial intelligence to enhance their functionalities.展开更多
A multistage solution treatment process was applied for nickel-based single crystal superalloys,complemented by various aging durations and cooling rates.The microstructure was characterized by scanning electron micro...A multistage solution treatment process was applied for nickel-based single crystal superalloys,complemented by various aging durations and cooling rates.The microstructure was characterized by scanning electron microscopy(SEM)to observe the γ'phase.Additionally,phase field simulations were conducted to model the growth ofγ'precipitates during aging and analyze their morphological evolution.The experimental results demonstrated that the multistage solution treatment effectively eliminated eutectic phases and carbides.Moreover,samples aged for 10 min exhibited larger and more rectangularγ'precipitates compared with those aged for 5 min.Notably,secondary γ'precipitates were observed in samples subjected to water cooling.Two indices for quantifying rectangularization were proposed and successfully applied.Based on the simulation results,lattice mismatch induced coherency stresses and elevated stress triaxiality along the <111> direction contributed to the rectangularization of theγ'phase.展开更多
Nickel-based single-crystal superalloy DD98M is widely used in high-temperature components such as aero-engines and gas turbines.Since it has only one crystal grain,the theory of slip deformation along the grain bound...Nickel-based single-crystal superalloy DD98M is widely used in high-temperature components such as aero-engines and gas turbines.Since it has only one crystal grain,the theory of slip deformation along the grain boundary of polycrystalline material is not suitable for the machining of a single crystal part.Therefore,micro-drilling of nickel-based single crystal superalloy still faces problems such as unclear cutting formation me-chanism and unclear surface/subsurface damage mechanism.In this paper,the formation mechanism and morphological characteristics of chips and burrs were studied by a single-factor experiment,and the plastic deformation rule and damage mechanism were investigated,combined with the changes of subsurface structure and grain type.Finally,the influence of the law and reason of tool wear condition on the hole wall and the drilled subsurface is analyzed.The experimental results indicate that drill chips mainly exhibit three morphologies.Their free surfaces feature a serrated appearance,while the contact surfaces are smooth.The entrance burrs are mainly flanging burrs.With the increase of spindle speed,the burr height decreases from 49.38 to 9.39μm.As the feed speed increases,the burr height increases from 6.50 to 63.87μm.The drilled subsurface can be divided into a white layer region,a plastic deformation region,and the matrix according to the microstructural change.As the depth from the machined surface increases,the degree of plastic deformation of the material decreases,the grain size gradually reduces,and the dislocation density decreases.Stacking fault and twinning mostly occur in the high-plastic deformation region,and recrystallization occurs on the machined surface.As the drilling length increases,the degree of tool wear increases,and the adhesion and ablation area on the hole wall surface increase.Moreover,the thickness of the white layer increases from 0 to 8.75μm,and the thickness of the plastic deformation layer increases from 1.28 to 11.31μm.The study has significant theoretical and practical implications for the efficient and low-damage machining of micro-holes in the nickel-based single crystal superalloy.展开更多
Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the elec...Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the electrode-neural interface.Methods:A prospective observational study involving 56 pediatric patients underwent cochlear implantation with Cochlear Nucleus devices.Intraoperative polarized impedance and electrically evoked compound action potential(ECAP)threshold were recorded across all 1232 electrodes using AutoNRT software.Eight electrodes with open-or short-circuit were excluded,leaving 1,224 for analysis.Impedance values were categorized by cochlear region(basal,middle,apical),and electrodes with elevated impedance(10-20 kΩ)were analyzed for regional distribution and clinical relevance.Data were analyzed for spatial patterns and correlation with the ECAP threshold profiles.Results:A consistent basal-to-apical increase in impedance was observed(7.7±1.9,9.2±1.4,10.8±1.5 kΩ;p<0.001).Impedance and ECAP threshold were weakly correlated(ρ=-0.20,p<0.001;β=-1.26,p<0.001),with a positive association in the apical region(ρ=0.12,p=0.048).Electrodes with higher impedance(1020 kΩ)were less likely to show elevated or absent TNRT(OR=0.175,p=0.02).The impedance gradient persisted across age groups and was significantly correlated with ECAP threshold patterns.Conclusion:Intraoperative impedance monitoring reveals a strong and physiologically consistent gradient,with higher values in apical electrodes.This gradient reflects anatomical and tissue interface variations,which may offer a valuable physiological indicator for intraoperative electrode positioning and neural interface integrity.展开更多
Thermocells are garnering increasing attention as a promising thermoelectric technology for harvesting low-grade heat.However,their performance is often limited by the scarcity of high-performance redox couples that p...Thermocells are garnering increasing attention as a promising thermoelectric technology for harvesting low-grade heat.However,their performance is often limited by the scarcity of high-performance redox couples that possess both high thermopower and rapid redox kinetics.This work addresses this challenge by leveraging our recently developed copper(Ⅰ/Ⅱ)(Cu^(+)/Cu^(2+))redox couple.We significantly enhance the performance of Cu-based liquid thermocells by integrating a thermosensitive crystallization process with etched carbon cloth electrodes,achieving synergistic improvements in thermodynamic and kinetic performance.The thermosensitive crystallization process establishes a persistent Cu^(2+)concentration gradient,boosting the thermopower from 1.47 to 2.93 mV K^(-1).Moreover,the etched carbon cloth electrodes provide a larger electroactive surface area and demonstrate a higher current density.Consequently,the optimized Cu^(+)/Cu^(2+)system achieved an exceptional normalized power density P_(max)(ΔT)^(-2)of 3.97 mW m^(-2)K^(-2).A thermocell module comprised of 20 cells directly power various electronic devices at a temperature difference of 40 K.This work successfully exhibits potential of Cu^(+)/Cu^(2+)redox couple in thermoelectric conversion and introduces a valuable redox couple for highperformance thermocells.展开更多
Driven by the trend of device miniaturization and high-density integration,the interaction between adjacent electrodes has become a critical factor affecting the interfacial reliability of thermoelectric(TE)structures...Driven by the trend of device miniaturization and high-density integration,the interaction between adjacent electrodes has become a critical factor affecting the interfacial reliability of thermoelectric(TE)structures.This study investigates the influence of adjoining electrode interactions on the interfacial response of a multi-electrode/TE substrate structure,including interfacial stresses and stress intensity factors at the electrode ends.To solve the corresponding boundary-value problem,the Fourier transforms are adopted to derive a governing integro-differential equation for the interfacial shear stress in multi-electrode systems,incorporating the TE effects as generalized forces on the right-hand side.The results show that both the interfacial tension and transverse stress in the electrodes are significantly affected by the presence of adjacent electrodes.The interaction between neighboring electrodes diminishes as their spacing increases or when an adhesive interlayer is introduced.Furthermore,the softer and thinner electrodes,the softer and thicker adhesive interlayer,and the smaller TE loads are found to be beneficial for improving the interfacial performance.These findings may contribute to the accurate measurement in surface sensors and layout design of multi-point health monitoring systems for TE structures.展开更多
Aqueous hydrogen(H_(2))gas batteries with unmatched lifespan are ideal for grid-scale energy storage,yet their deployment remains limited by the lack of low-cost,efficient,and durable hydrogen electrodes.Here,we repor...Aqueous hydrogen(H_(2))gas batteries with unmatched lifespan are ideal for grid-scale energy storage,yet their deployment remains limited by the lack of low-cost,efficient,and durable hydrogen electrodes.Here,we report a high-throughput and durable gas diffusion electrode(GDE)based on a simply preparable carbon-coated nickel(Ni@C)catalyst and the design of H_(2) diffusion channels.By optimizing the carbon layer structure,a balance between the intrinsic activity and stability of the catalyst can be achieved.This Ni@C catalyst exhibits a hydrogen oxidation reaction(HOR)activity of 44 A g^(-1) as well as remarkable hydrogen evolution reaction(HER)performance.Experimental results and theoretical calculations confirm the electronic interaction between the carbon shell and Ni.In combination with a hydrophobic design,a robust and durable Ni@C-GDE has been fabricated.This electrode achieves a low HOR polarization of only 91 mV at 30 mA cm^(-2),outperforming Pt/C-GDE(154 mV),and operates stably over 4500cycles(3200 h)for HOR/HER reversing.Enabled by this electrode,a 10 Ah Ni-H_(2) battery with an energy density of 156.3 Wh kg^(-1) and cost of 62.2$kWh^(-1) is demonstrated.This work offers a viable strategy for practical and scalable hydrogen gas batteries.展开更多
As the core determinant of lithium-ion battery performance,electrode materials play a crucial role in defining the battery's capacity,cycling stability,and durability.During charging and discharging,electrode mate...As the core determinant of lithium-ion battery performance,electrode materials play a crucial role in defining the battery's capacity,cycling stability,and durability.During charging and discharging,electrode materials undergo complex ion intercalation and deintercalation processes,accompanied by defect formation and structural evolution.However,the microscopic mechanisms underlying processes such as cation disordering,lattice oxygen loss,and stage structure formation are still not fully understood.To address these challenges,we have developed the Electrode Dynamic Ion Intercalation/Deintercalation Simulator(EDIS),a software platform designed to simulate the dynamic processes of ion intercalation and deintercalation in electrode materials.Leveraging high-precision machine learning potentials,EDIS can efficiently model structural evolution and lithium-ion diffusion behavior under various states of charge and discharge,achieving accuracy approaching that of quantum mechanical methods in relevant chemical spaces.The software supports quantitative analysis of how variations in lithium-ion concentration and distribution affect lithium-ion transport properties,enables evaluation of the impact of structural defects,and allows for tracking of both structural evolution and transport characteristics during continuous cycling.EDIS is versatile and can be extended to sodium-ion batteries and related systems.By enabling in-depth analysis of these microscopic processes,EDIS provides a robust theoretical tool for mechanistic studies and the rational design of high-performance electrode materials for next-generation lithium-ion batteries.展开更多
To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as wel...To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.展开更多
Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_...Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_(0.1)O_(3−δ)(BSCCFN)air electrode,based on Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF),is designed using a perovskite A-B-site ionic Lewis acid strength(ISA)polarization distribution strategy and is successfully applied in both oxygen-ion conducting solid oxide fuel cells(O-SOFCs)and proton-conducting reversible protonic ceramic cells(R-PCCs).When BSCCFN is used as the air electrode in O-SOFCs,a peak power density(PPD)of 1.45 W cm^(−2)is achieved at 650°C,whereas in R-PCCs,a PPD of 1.13 W cm^(−2)and a current density of−1.8 A cm^(−2)at 1.3 V are achieved at the same temperature and show stable reversibility over 100 h.Experimental measurements and theoretical calculations demonstrate that low-ISA Cs+doping accelerates the reaction kinetics of both oxygen ions and protons,while high-ISA Nb^(5+)doping enhances electrode stability.The synergistic effect of Cs^(+)and Nb^(5+)co-doping in the BSCCFN electrode lies in the ISA polarization distribution,which weakens the Co/Fe–O bond covalency,thereby promoting oxygen vacancy formation and facilitating the conduction of oxygen ions and protons.展开更多
Economical,stable,and corrosion-resistant catalytic electrodes are still urgently needed for the oxygen evolution reaction(OER)in water and seawater.Herein,a mild electroless plating strategy is used to achieve large-...Economical,stable,and corrosion-resistant catalytic electrodes are still urgently needed for the oxygen evolution reaction(OER)in water and seawater.Herein,a mild electroless plating strategy is used to achieve large-scale preparation of the“integrated”phosphorus-based precatalyst(FeP-NiP)on nickel foam(NF),which is in situ reconstructed into a highly active and corrosion-resistant(Fe)NiOOH phase for OER.The interaction between phosphate anions(PO_(x)^(y-))and iron ions(Fe^(3+))tunes the electronic structure of the catalytic phase to further enhance OER kinetics.The integrated FeP-NiP@NF electrode exhibits low overpotentials for OER in alkaline water/seawater,requiring only 275/289,320/336,and 349/358 mV to reach 0.1,0.5,and 1.0 A cm^(−2),respectively.The in situ reconstructed PO_(x)^(y-)anion electrostatically repels Cl−in seawater electrolytes,allowing stable operation for over 7 days at 1.0 A cm^(−2) in extreme electrolytes(1.0 M KOH+seawater and 6.0 M KOH+seawater),demonstrating industrial-level stability.This study overcomes the complex synthesis limitations of P-based materials through innovative material design,opening new avenues for electrochemical energy conversion.展开更多
Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. However, the high machining requireme...Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. However, the high machining requirement of a large number of film cooling holes can be extremely challenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machining process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined products. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are investigated. The results show that larger inner diameters could effectively improve the flushing condition and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diameter of the tube electrode. (C) 2015 The Authors. Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics.展开更多
The crucible-free electrode induction melting gas atomization（EIGA） technology is an advanced technology for preparing ultra-clean nickel-based superalloy powders. One of the key issues for fabricating powders with ...The crucible-free electrode induction melting gas atomization（EIGA） technology is an advanced technology for preparing ultra-clean nickel-based superalloy powders. One of the key issues for fabricating powders with high quality and yield is the consecutive induction melting of a superalloy electrode. The coupling of a superalloy electrode and coil,frequency, output power, and heat conduction are investigated to improve the controllable electrode induction melting process. Numerical simulation results show that when the coil frequency is 400 kHz, the output power is 100 kW, superalloy liquid flow with a diameter of about 5 mm is not consecutive. When the coil frequency is reduced to 40 kHz, the output power is 120 kW, superalloy liquid flow is consecutive, and its diameter is about 7 mm.展开更多
The electrocatalytic oxidation of methanol was studied over Ni, Co and Cu binary or ternary alloys on graphite electrodes in a NaOH solution （0.1 mol/L）. The catalysts were prepared by cycling the graphite electrode...The electrocatalytic oxidation of methanol was studied over Ni, Co and Cu binary or ternary alloys on graphite electrodes in a NaOH solution （0.1 mol/L）. The catalysts were prepared by cycling the graphite electrode in solutions containing Ni, Cu and Co ions at cathodic potentials. The synergistic effects and catalytic activity of the modified electrodes were investigated by cyclic voltammetry （CV）, chronoamperometry CCA） and electrochemical impedance spectroscopy （EIS）. It was found that, in the presence of methanol, the modified Ni-based ternary alloy electrode （G/NiCuCo） exhibited a significantly higher response for methanol oxidation compared to the other samples. The anodic peak currents showed a linear dependency on the square root of the scan rate, which is a characteristic of a diffusion controlled process. During CA studies, the reaction exhibited Cottrellin behavior and the diffusion coefficient of methanol was determined to be 6.25× 10-6 cm2/s and the catalytic rate constant, K, for methanol oxidation was found to be 40×107 cm3/Cmol.s）. EIS was used to investigate the catalytic oxidation of methanol on the surface of the modified electrode.展开更多
High-entropy materials represent a new category of high-performance materials,first proposed in 2004 and extensively investigated by researchers over the past two decades.The definition of high-entropy materials has c...High-entropy materials represent a new category of high-performance materials,first proposed in 2004 and extensively investigated by researchers over the past two decades.The definition of high-entropy materials has continuously evolved.In the last ten years,the discovery of an increasing number of high-entropy materials has led to significant advancements in their utilization in energy storage,electrocatalysis,and related domains,accompanied by a rise in techniques for fabricating high-entropy electrode materials.Recently,the research emphasis has shifted from solely improving the performance of high-entropy materials toward exploring their reaction mechanisms and adopting cleaner preparation approaches.However,the current definition of high-entropy materials remains relatively vague,and the preparation method of high-entropy materials is based on the preparation method of single metal/low-or medium-entropy materials.It should be noted that not all methods applicable to single metal/low-or medium-entropy materials can be directly applied to high-entropy materials.In this review,the definition and development of high-entropy materials are briefly reviewed.Subsequently,the classification of high-entropy electrode materials is presented,followed by a discussion of their applications in energy storage and catalysis from the perspective of synthesis methods.Finally,an evaluation of the advantages and disadvantages of various synthesis methods in the production process of different high-entropy materials is provided,along with a proposal for potential future development directions for high-entropy materials.展开更多
Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poi...Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poisoning of air electrodes,causing substantial degradation in electrochemical performance and compromising the longterm stability of SOCs.This mini-review examines the mechanism of Cr deposition and poisoning in air electrodes under both fuel-cell and electrolysis modes.Furthermore,emphasis is placed on the recent advancements in strategies to mitigate Cr poisoning,offering insights into the rational design and development of active and Cr-tolerant air electrodes for SOCs.展开更多
基金supported by the National Natural Science Foundation of China(52271210,22179032,52171176)。
文摘Exploring efficient transition-metal-based electrocatalysts is critical for the wide application of electrochemical hydrogen generation technology.Although the phase displays prominent influence on their performance,it remains a major challenge to achieve phase regulation in the same synthesis method and elucidate the intrinsic relationship between the phase and activity.Herein,we developed a sulfur induced electrodeposition strategy to achieve the precise phase regulation of nickel-based materials from Ni(OH)_(2)to Ni and Ni_(3)S_(2).S atoms can be introduced into Ni and Ni(OH)_(2)due to sulfur inducement,and the S proportion is finely controlled via changing the deposition parameters.Importantly,the obtained S-Ni catalyst displays enhanced hydrogen evolution activity with an ultralow overpotential of 27 mV at 10 mA cm^(-2),which is superior to the S-Ni(OH)_(2),Ni_(3)S_(2),and even Pt/C.Density functional theory(DFT)calculations disclose the S-Ni catalyst exhibits optimal charge state and local coordination,remarkably optimizing the water adsorption and Ni-H^(*)binding energy.This work provides new insights into phase regulation in electrodeposition and an understanding of the intrinsic relationship between phase and activity.
文摘Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.
基金supported by the University of Seoul’s 2025 Research Fund.
文摘Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.
基金financial support from the National Natural Science Foundation of China(52473248,52203123,52125301,22279070 and U21A20170)the State Key Laboratory of Polymer Materials Engineering(Grant No:sklpme 2023-1-05 and sklpme 2024-2-04)+3 种基金the Ministry of Science and Technology of China(No.2019YFA0705703)the Sichuan Science and Technology Program(2023NSFSC0991 and 2025ZNSFSC1411)the Fundamental Research Funds for the Central Universitiespartially sponsored by the Double First-Class Construction Funds of Sichuan University.
文摘The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.However,this pursuit has been fundamentally hindered by the absence of transformative battery materials capable of delivering the necessary electrochemical functions,robust interface adhesion,and,crucially,the suitable rheological properties required for on-demand shaping.In this work,we introduce a concept of a multifunctional plasticine electrode matrix(PEM)featuring nano-interpenetrating networks(nano-IPN)to address this challenge.Utilizing the nonflammable liquid-electrolyte hydration combined with conductive nanomaterials,we have realized a PEM in the form of a multifunctional nanocomposite that integrates ion and electron conduction,component binding,non-flammability,and plasticine-like moldability.With this PEM,we have successfully fabricated a variety of bulk-flexible electrodes with high mass loading of active material(AM)(>70 wt%)using industry-friendly extrusion and compression molding techniques.Moreover,these high AM-loading composite electrodes achieve an unparalleled bulk conformability and flexibility,remaining structurally intact even under severe mechanical stress.Ultimately,we have successfully produced shape-patternable and flexible batteries via extrusion molding.This study underscores the potential of the PEM to revolutionize battery microstructures,interfaces,manufacturing processes,and performance characteristics.
基金supported by the Basic and Applied Basic Research Foundation of Guangdong province(2024A1515030155 and 2022A1515010272)Natural Science Foundation of China(61904067)+2 种基金Basic and Applied Basic Research Foundation of Guangzhou city(202102020758)Open funding from State Key Laboratory of Optoelectronic Materials and Technologies(Sun Yat-Sen University,OEMT2022-KF-08)Fundamental Research Funds for the Central Universities(11625109,11621405)。
文摘Metals,indispensable since the Bronze Age,remain pivotal in modern technologies due to their exceptional properties and versatility.Beyond traditional machining,advanced nano/micro-machining techniques enable the fabrication of metallic nano/micro structures with high precision in shape,size,and pattern.These structures endow flexible electrodes with outstanding electrical,mechanical,optical,and electrochemical performance,enabling growing applications in flexible optoelectronics,epidermal electronics,energy harvesting,and biochemical sensing.This review provides a comprehensive overview of the fabrication strategies for flexible electrodes made from metal meshes,metal nanowires,and liquid metals.The current advancements,existing challenges,and emerging technologies are systematically discussed.Furthermore,the progression toward ultra-thin,soft epidermal electrodes is explored,with an emphasis on novel in situ and transfer fabrication methods.We examine the underlying mechanisms,performance indicators,and their integration for on-skin applications,including bioelectric sensing,electrical stimulation,and energy harvesting.Finally,we highlight the remaining challenges in performance improvement and industrialization of flexible and epidermal electrodes,along with future opportunities for integrating multimodal systems and leveraging artificial intelligence to enhance their functionalities.
基金supported by the Stable Support Project and the Major National Science and Technology Project,China(Nos.2017-Ⅶ-0008-0101,2017-Ⅵ-0003-0073)。
文摘A multistage solution treatment process was applied for nickel-based single crystal superalloys,complemented by various aging durations and cooling rates.The microstructure was characterized by scanning electron microscopy(SEM)to observe the γ'phase.Additionally,phase field simulations were conducted to model the growth ofγ'precipitates during aging and analyze their morphological evolution.The experimental results demonstrated that the multistage solution treatment effectively eliminated eutectic phases and carbides.Moreover,samples aged for 10 min exhibited larger and more rectangularγ'precipitates compared with those aged for 5 min.Notably,secondary γ'precipitates were observed in samples subjected to water cooling.Two indices for quantifying rectangularization were proposed and successfully applied.Based on the simulation results,lattice mismatch induced coherency stresses and elevated stress triaxiality along the <111> direction contributed to the rectangularization of theγ'phase.
基金Supported by National Natural Science Foundation of China(Grant Nos.52475433,52305453)Hebei Provincial Natural Science Foundation(Grant No.E2022501004)+1 种基金the Fundamental Research Funds for the Central Universities(Grant No.2023GFYD002)Shijiazhuang Municipal Science and Technology Plan Project(Grant No.241790747A).
文摘Nickel-based single-crystal superalloy DD98M is widely used in high-temperature components such as aero-engines and gas turbines.Since it has only one crystal grain,the theory of slip deformation along the grain boundary of polycrystalline material is not suitable for the machining of a single crystal part.Therefore,micro-drilling of nickel-based single crystal superalloy still faces problems such as unclear cutting formation me-chanism and unclear surface/subsurface damage mechanism.In this paper,the formation mechanism and morphological characteristics of chips and burrs were studied by a single-factor experiment,and the plastic deformation rule and damage mechanism were investigated,combined with the changes of subsurface structure and grain type.Finally,the influence of the law and reason of tool wear condition on the hole wall and the drilled subsurface is analyzed.The experimental results indicate that drill chips mainly exhibit three morphologies.Their free surfaces feature a serrated appearance,while the contact surfaces are smooth.The entrance burrs are mainly flanging burrs.With the increase of spindle speed,the burr height decreases from 49.38 to 9.39μm.As the feed speed increases,the burr height increases from 6.50 to 63.87μm.The drilled subsurface can be divided into a white layer region,a plastic deformation region,and the matrix according to the microstructural change.As the depth from the machined surface increases,the degree of plastic deformation of the material decreases,the grain size gradually reduces,and the dislocation density decreases.Stacking fault and twinning mostly occur in the high-plastic deformation region,and recrystallization occurs on the machined surface.As the drilling length increases,the degree of tool wear increases,and the adhesion and ablation area on the hole wall surface increase.Moreover,the thickness of the white layer increases from 0 to 8.75μm,and the thickness of the plastic deformation layer increases from 1.28 to 11.31μm.The study has significant theoretical and practical implications for the efficient and low-damage machining of micro-holes in the nickel-based single crystal superalloy.
文摘Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the electrode-neural interface.Methods:A prospective observational study involving 56 pediatric patients underwent cochlear implantation with Cochlear Nucleus devices.Intraoperative polarized impedance and electrically evoked compound action potential(ECAP)threshold were recorded across all 1232 electrodes using AutoNRT software.Eight electrodes with open-or short-circuit were excluded,leaving 1,224 for analysis.Impedance values were categorized by cochlear region(basal,middle,apical),and electrodes with elevated impedance(10-20 kΩ)were analyzed for regional distribution and clinical relevance.Data were analyzed for spatial patterns and correlation with the ECAP threshold profiles.Results:A consistent basal-to-apical increase in impedance was observed(7.7±1.9,9.2±1.4,10.8±1.5 kΩ;p<0.001).Impedance and ECAP threshold were weakly correlated(ρ=-0.20,p<0.001;β=-1.26,p<0.001),with a positive association in the apical region(ρ=0.12,p=0.048).Electrodes with higher impedance(1020 kΩ)were less likely to show elevated or absent TNRT(OR=0.175,p=0.02).The impedance gradient persisted across age groups and was significantly correlated with ECAP threshold patterns.Conclusion:Intraoperative impedance monitoring reveals a strong and physiologically consistent gradient,with higher values in apical electrodes.This gradient reflects anatomical and tissue interface variations,which may offer a valuable physiological indicator for intraoperative electrode positioning and neural interface integrity.
基金financially supported by research grants from Innovative Research Group Project of National Natural Science Foundation of China(52021004)the National Key Research and Development Program of China(2022YFB3803300)+1 种基金the National Natural Science Foundation of China(62474026,62205140,12204071)the China Postdoctoral Science Foundation(2022M710532)。
文摘Thermocells are garnering increasing attention as a promising thermoelectric technology for harvesting low-grade heat.However,their performance is often limited by the scarcity of high-performance redox couples that possess both high thermopower and rapid redox kinetics.This work addresses this challenge by leveraging our recently developed copper(Ⅰ/Ⅱ)(Cu^(+)/Cu^(2+))redox couple.We significantly enhance the performance of Cu-based liquid thermocells by integrating a thermosensitive crystallization process with etched carbon cloth electrodes,achieving synergistic improvements in thermodynamic and kinetic performance.The thermosensitive crystallization process establishes a persistent Cu^(2+)concentration gradient,boosting the thermopower from 1.47 to 2.93 mV K^(-1).Moreover,the etched carbon cloth electrodes provide a larger electroactive surface area and demonstrate a higher current density.Consequently,the optimized Cu^(+)/Cu^(2+)system achieved an exceptional normalized power density P_(max)(ΔT)^(-2)of 3.97 mW m^(-2)K^(-2).A thermocell module comprised of 20 cells directly power various electronic devices at a temperature difference of 40 K.This work successfully exhibits potential of Cu^(+)/Cu^(2+)redox couple in thermoelectric conversion and introduces a valuable redox couple for highperformance thermocells.
基金Project supported by the National Natural Science Foundation of China(Nos.12502117,12272269,11972257)the Natural Science Foundation of Ningxia of China(No.2024AAC03018)+1 种基金the Fundamental Research Funds for the Central Universitiesthe Shanghai Gaofeng Project for University Academic Program Development。
文摘Driven by the trend of device miniaturization and high-density integration,the interaction between adjacent electrodes has become a critical factor affecting the interfacial reliability of thermoelectric(TE)structures.This study investigates the influence of adjoining electrode interactions on the interfacial response of a multi-electrode/TE substrate structure,including interfacial stresses and stress intensity factors at the electrode ends.To solve the corresponding boundary-value problem,the Fourier transforms are adopted to derive a governing integro-differential equation for the interfacial shear stress in multi-electrode systems,incorporating the TE effects as generalized forces on the right-hand side.The results show that both the interfacial tension and transverse stress in the electrodes are significantly affected by the presence of adjacent electrodes.The interaction between neighboring electrodes diminishes as their spacing increases or when an adhesive interlayer is introduced.Furthermore,the softer and thinner electrodes,the softer and thicker adhesive interlayer,and the smaller TE loads are found to be beneficial for improving the interfacial performance.These findings may contribute to the accurate measurement in surface sensors and layout design of multi-point health monitoring systems for TE structures.
基金financially supported by the“National Natural Science Foundation of China”(No.22279082)the“Natural Science Foundation of Sichuan”(2025YFHZ0056)。
文摘Aqueous hydrogen(H_(2))gas batteries with unmatched lifespan are ideal for grid-scale energy storage,yet their deployment remains limited by the lack of low-cost,efficient,and durable hydrogen electrodes.Here,we report a high-throughput and durable gas diffusion electrode(GDE)based on a simply preparable carbon-coated nickel(Ni@C)catalyst and the design of H_(2) diffusion channels.By optimizing the carbon layer structure,a balance between the intrinsic activity and stability of the catalyst can be achieved.This Ni@C catalyst exhibits a hydrogen oxidation reaction(HOR)activity of 44 A g^(-1) as well as remarkable hydrogen evolution reaction(HER)performance.Experimental results and theoretical calculations confirm the electronic interaction between the carbon shell and Ni.In combination with a hydrophobic design,a robust and durable Ni@C-GDE has been fabricated.This electrode achieves a low HOR polarization of only 91 mV at 30 mA cm^(-2),outperforming Pt/C-GDE(154 mV),and operates stably over 4500cycles(3200 h)for HOR/HER reversing.Enabled by this electrode,a 10 Ah Ni-H_(2) battery with an energy density of 156.3 Wh kg^(-1) and cost of 62.2$kWh^(-1) is demonstrated.This work offers a viable strategy for practical and scalable hydrogen gas batteries.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB1040300)the National Natural Science Foundation of China(Grant No.52172258)。
文摘As the core determinant of lithium-ion battery performance,electrode materials play a crucial role in defining the battery's capacity,cycling stability,and durability.During charging and discharging,electrode materials undergo complex ion intercalation and deintercalation processes,accompanied by defect formation and structural evolution.However,the microscopic mechanisms underlying processes such as cation disordering,lattice oxygen loss,and stage structure formation are still not fully understood.To address these challenges,we have developed the Electrode Dynamic Ion Intercalation/Deintercalation Simulator(EDIS),a software platform designed to simulate the dynamic processes of ion intercalation and deintercalation in electrode materials.Leveraging high-precision machine learning potentials,EDIS can efficiently model structural evolution and lithium-ion diffusion behavior under various states of charge and discharge,achieving accuracy approaching that of quantum mechanical methods in relevant chemical spaces.The software supports quantitative analysis of how variations in lithium-ion concentration and distribution affect lithium-ion transport properties,enables evaluation of the impact of structural defects,and allows for tracking of both structural evolution and transport characteristics during continuous cycling.EDIS is versatile and can be extended to sodium-ion batteries and related systems.By enabling in-depth analysis of these microscopic processes,EDIS provides a robust theoretical tool for mechanistic studies and the rational design of high-performance electrode materials for next-generation lithium-ion batteries.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.NRF-2021M3H4A1A02048529)the Ministry of Trade,Industry and Energy(MOTIE)of the Korean government under grant No.RS-2022-00155854support from the DGIST Supercomputing and Big Data Center.
文摘To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.
基金funding from the National Natural Science Foundation of China (Award 91745203) supplemented by Central Universities’ Basic Research Funds.
文摘Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_(0.1)O_(3−δ)(BSCCFN)air electrode,based on Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF),is designed using a perovskite A-B-site ionic Lewis acid strength(ISA)polarization distribution strategy and is successfully applied in both oxygen-ion conducting solid oxide fuel cells(O-SOFCs)and proton-conducting reversible protonic ceramic cells(R-PCCs).When BSCCFN is used as the air electrode in O-SOFCs,a peak power density(PPD)of 1.45 W cm^(−2)is achieved at 650°C,whereas in R-PCCs,a PPD of 1.13 W cm^(−2)and a current density of−1.8 A cm^(−2)at 1.3 V are achieved at the same temperature and show stable reversibility over 100 h.Experimental measurements and theoretical calculations demonstrate that low-ISA Cs+doping accelerates the reaction kinetics of both oxygen ions and protons,while high-ISA Nb^(5+)doping enhances electrode stability.The synergistic effect of Cs^(+)and Nb^(5+)co-doping in the BSCCFN electrode lies in the ISA polarization distribution,which weakens the Co/Fe–O bond covalency,thereby promoting oxygen vacancy formation and facilitating the conduction of oxygen ions and protons.
基金funding support from Natural Science Foundation of Shanghai(Grant No.23ZR1443900)the National Natural Science Foundation of China(Grant Nos.22178309,22476131 and 22176127)。
文摘Economical,stable,and corrosion-resistant catalytic electrodes are still urgently needed for the oxygen evolution reaction(OER)in water and seawater.Herein,a mild electroless plating strategy is used to achieve large-scale preparation of the“integrated”phosphorus-based precatalyst(FeP-NiP)on nickel foam(NF),which is in situ reconstructed into a highly active and corrosion-resistant(Fe)NiOOH phase for OER.The interaction between phosphate anions(PO_(x)^(y-))and iron ions(Fe^(3+))tunes the electronic structure of the catalytic phase to further enhance OER kinetics.The integrated FeP-NiP@NF electrode exhibits low overpotentials for OER in alkaline water/seawater,requiring only 275/289,320/336,and 349/358 mV to reach 0.1,0.5,and 1.0 A cm^(−2),respectively.The in situ reconstructed PO_(x)^(y-)anion electrostatically repels Cl−in seawater electrolytes,allowing stable operation for over 7 days at 1.0 A cm^(−2) in extreme electrolytes(1.0 M KOH+seawater and 6.0 M KOH+seawater),demonstrating industrial-level stability.This study overcomes the complex synthesis limitations of P-based materials through innovative material design,opening new avenues for electrochemical energy conversion.
基金the financial support provided by the National Natural Science Foundation of China (No. 51475237)the National High-Tech Research and Development Program of China (No. 2013AA040101)+1 种基金the Program for New Century Excellent Talents in University (No. NCET-12-0627) of Chinathe Funding of Jiangsu Innovation Program for Graduate Education (No. KYLX_0232) of China
文摘Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. However, the high machining requirement of a large number of film cooling holes can be extremely challenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machining process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined products. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are investigated. The results show that larger inner diameters could effectively improve the flushing condition and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diameter of the tube electrode. (C) 2015 The Authors. Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics.
文摘The crucible-free electrode induction melting gas atomization（EIGA） technology is an advanced technology for preparing ultra-clean nickel-based superalloy powders. One of the key issues for fabricating powders with high quality and yield is the consecutive induction melting of a superalloy electrode. The coupling of a superalloy electrode and coil,frequency, output power, and heat conduction are investigated to improve the controllable electrode induction melting process. Numerical simulation results show that when the coil frequency is 400 kHz, the output power is 100 kW, superalloy liquid flow with a diameter of about 5 mm is not consecutive. When the coil frequency is reduced to 40 kHz, the output power is 120 kW, superalloy liquid flow is consecutive, and its diameter is about 7 mm.
基金provided by K.N.Toosi University of Technology Research Council to conduct this research
文摘The electrocatalytic oxidation of methanol was studied over Ni, Co and Cu binary or ternary alloys on graphite electrodes in a NaOH solution （0.1 mol/L）. The catalysts were prepared by cycling the graphite electrode in solutions containing Ni, Cu and Co ions at cathodic potentials. The synergistic effects and catalytic activity of the modified electrodes were investigated by cyclic voltammetry （CV）, chronoamperometry CCA） and electrochemical impedance spectroscopy （EIS）. It was found that, in the presence of methanol, the modified Ni-based ternary alloy electrode （G/NiCuCo） exhibited a significantly higher response for methanol oxidation compared to the other samples. The anodic peak currents showed a linear dependency on the square root of the scan rate, which is a characteristic of a diffusion controlled process. During CA studies, the reaction exhibited Cottrellin behavior and the diffusion coefficient of methanol was determined to be 6.25× 10-6 cm2/s and the catalytic rate constant, K, for methanol oxidation was found to be 40×107 cm3/Cmol.s）. EIS was used to investigate the catalytic oxidation of methanol on the surface of the modified electrode.
基金supported by the National Natural Science Foundation of China(22378431,52004338,51622406,21673298)Hunan Provincial Natural Science Foundation(2023JJ40210,2022JJ20075)+3 种基金the Science and Technology Innovation Program of Hunan Province(2023RC3259)the Key R&D plan of Hunan Province(2024JK2096)Scientifc Research Fund of Hunan Provincial Education Department(23B0699)Central South University Innovation-Driven Research Programme(2023CXQD008).
文摘High-entropy materials represent a new category of high-performance materials,first proposed in 2004 and extensively investigated by researchers over the past two decades.The definition of high-entropy materials has continuously evolved.In the last ten years,the discovery of an increasing number of high-entropy materials has led to significant advancements in their utilization in energy storage,electrocatalysis,and related domains,accompanied by a rise in techniques for fabricating high-entropy electrode materials.Recently,the research emphasis has shifted from solely improving the performance of high-entropy materials toward exploring their reaction mechanisms and adopting cleaner preparation approaches.However,the current definition of high-entropy materials remains relatively vague,and the preparation method of high-entropy materials is based on the preparation method of single metal/low-or medium-entropy materials.It should be noted that not all methods applicable to single metal/low-or medium-entropy materials can be directly applied to high-entropy materials.In this review,the definition and development of high-entropy materials are briefly reviewed.Subsequently,the classification of high-entropy electrode materials is presented,followed by a discussion of their applications in energy storage and catalysis from the perspective of synthesis methods.Finally,an evaluation of the advantages and disadvantages of various synthesis methods in the production process of different high-entropy materials is provided,along with a proposal for potential future development directions for high-entropy materials.
基金supported by National Natural Science Foundation of China(22279018)National Natural Science Foundation of China(22005055)Natural Science Foundation of Fujian Province(2022J01085).
文摘Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poisoning of air electrodes,causing substantial degradation in electrochemical performance and compromising the longterm stability of SOCs.This mini-review examines the mechanism of Cr deposition and poisoning in air electrodes under both fuel-cell and electrolysis modes.Furthermore,emphasis is placed on the recent advancements in strategies to mitigate Cr poisoning,offering insights into the rational design and development of active and Cr-tolerant air electrodes for SOCs.
