To obtain the semi-solid slurry with uniform and fine structure morphology that satisfies the requirement of rheocasting process, a new process for preparing semi-solid AI alloy slurry was developed, in which local ch...To obtain the semi-solid slurry with uniform and fine structure morphology that satisfies the requirement of rheocasting process, a new process for preparing semi-solid AI alloy slurry was developed, in which local chilling was combined with low superheat pouring and slight electromagnetic stirring （LSPSEMS）. The morphology and the size of primary a-AI in the A356 alloy slurry prepared with the new process, i.e., LSPSEMS with local chilling, were investigated using MIAPS image analyzing software, and the grain refinement mechanism was discussed. The results indicate that the semi-solid primary phase consists of particle-like or globular-like a-AI, and the morphology and grain size of primary a-AI in the slurry can be markedly improved by the new process. The fine primary a-AI distributes uniformly in the slurry, which satisfies the requirement of rheocasting. Compared with the alloy prepared by LSPSEMS, the average equal-area-circle grain diameter of primary a-AI in semi-solid A356 alloy ingot prepared by the new process is decreased from 85.6μm to 68.8 μm at the central area, 112.6 μm to 77.6 μm at the transition area and is 84.7 μm in the edge area, respectively. The corresponding shape factor of primary a-AI is increased from 0.78 to 0.83, 0.54 to 0.77 and 0.28 to 0.59, respectively. In addition, the pouring temperature could be suitably raised from 620-630℃ of the traditional process to 650℃ using this technique, which is convenient for practical operation. The mechanism of grain refinement, in the new process, is that the local chilling quickens up the temperature decrease in the center of the melt. The nuclei could not grow up in a short time so the finer grains are formed in the melt.展开更多
The coal hydrogenation reaction process is simply considered as three steps.In the first step,the smaller molecules associated with coal structure units are released as some gases and water in the condition of solvent...The coal hydrogenation reaction process is simply considered as three steps.In the first step,the smaller molecules associated with coal structure units are released as some gases and water in the condition of solvent and heating.In this step,some weaker bonds of the coal structure units are ruptured to form free radicals.The radicals are stabi- lized by hydrogen atoms from donor solvent and/or H2.In the second step,chain reaction occurs quickly.In the process of chain reaction,the covalent bonds of coal structure units are attacked by the radicals to form some asphaltenes.In the third step,asphaltenes are hydrogenated form more liquids and some gases.In coal liquefaction,the second step of coal hydrogenation reaction should be controlled to avoid integration of radicals,and the third step of coal hydrogenation should be accelerated to increase the coal conversion and the oil yield.A new concept of coal liquefaction process named as China direct coal lique- faction (CDCL) process is presented based on the mechanism study of coal liquefaction.展开更多
In this work,a new process for achieving the recovery of elemental sulfur by utilizing a fluidized catalytic cracking(FCC) riser reactor for SOxtreatment(FCC-DeSOx) is proposed.The process leverages the high temperatu...In this work,a new process for achieving the recovery of elemental sulfur by utilizing a fluidized catalytic cracking(FCC) riser reactor for SOxtreatment(FCC-DeSOx) is proposed.The process leverages the high temperatures and hydrocarbon concentrations in the FCC riser reactor to convert SOxinto H_(2)S.Subsequently,H_(2)S,along with the cracked gas,is processed downstream to produce sulfur.Thermodynamic analysis of the key reduction reactions in the FCC-DeSOxprocess revealed that complete conversion of SOxto H_(2)S is feasible in the dry gas(hydrogen-rich) prelift zone,as well as the upper and lower zones of the riser,upon achieving thermodynamic equilibrium.Experimental studies were conducted to replicate the conditions of these reaction zones using a low concentration of hydrogen gas as the reducing agent.Through process optimization,investigation of the minimum reaction time,and kinetic studies,the potential of this method for the complete reduction of SOxwas further confirmed.展开更多
A new synthesis method of difenoconazole is studied.Difenoconazole is prepared from m-dichlorobenzene by Friedel Crafts reaction,cyclization,bromination,nucleophilic substitution and etherification.The new process imp...A new synthesis method of difenoconazole is studied.Difenoconazole is prepared from m-dichlorobenzene by Friedel Crafts reaction,cyclization,bromination,nucleophilic substitution and etherification.The new process improves the selectivity of the reaction and simplified the pu-rification process.The total yield of this process is 84%,which provides a green and economical synthetic route for industrialization.展开更多
Remote sensing has played a pivotal role in our understanding of the geometry of dykes and dyke swarms on Earth,Venus and Mars(West and Ernst,1991;Mege and Masson,1995;Ernst et al.,2005).Since the 1970’s
Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic...Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic FEM code has been developed. Isothermal forging process of a cylindrical housing has been simulated. The simulation results show that the given techniques and the FEM code are reasonable and feasible for three-dimensional bulk forming processes.展开更多
The first International Conference on Modern Process Mineralogy and Mineral Processing, organized by the Nonferrous Metals Society of China and hosted by Beijing General Research Institute of Mining and Metallurgy,was...The first International Conference on Modern Process Mineralogy and Mineral Processing, organized by the Nonferrous Metals Society of China and hosted by Beijing General Research Institute of Mining and Metallurgy,was held on September 22-25,1992,in Beijing,China.About 350 scholars and experts from 25 countries and regions showed up at the conference and 130 papers were presented,among them 98 papers are of mineral processing.Some of the papers given in mineral processing are summed up as follows.展开更多
A new process of low-temperature methanol synthesis from CO/CO2/H2 based on dual-catalysis has been developed. Some alcohols, especially 2-alcohol, were found to have high catalytic promoting effect on the synthesis o...A new process of low-temperature methanol synthesis from CO/CO2/H2 based on dual-catalysis has been developed. Some alcohols, especially 2-alcohol, were found to have high catalytic promoting effect on the synthesis of methanol from CO hydrogenation. At 443 K and 5 MPa, the synthesis of methanol could process high effectively, resulting from the synergic catalysis of Cu/ZnO solid catalyst and 2-alcohol solvent catalyst. The primary results showed that when 2-butanol was used as reaction solvent, the one-pass average yield and the selectivity of methanol, in 40 h continuous reaction at temperature as low as 443 K and 5 MPa, were high up to 46.51% and 98.94% respectively. The catalytic activity was stable and the reaction temperature was 80 K or so lower than that in current industry synthesis process. This new process hopefully will become a practical method for methanol synthesis at low temperature.展开更多
It is reported that the work of re-structuring the frame of China nationalstandards system for processing food has been finished with the print and distribution of 2004-2005Development Plan of National Standards for F...It is reported that the work of re-structuring the frame of China nationalstandards system for processing food has been finished with the print and distribution of 2004-2005Development Plan of National Standards for Food (hereinafter Plan). According to the demand of thePlan, there will be great changes among the current national standards and the professionalstandards for processing food, in which some standards will be integrated with others, somestandards will be cancelled, and some will be brought into the new standards system after the reviewof standards. The standards after being changed and the new national standards and the professionalstandards that need to be developed compose the new standards system for processing food.展开更多
The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of s...The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ<sub>b</sub>, yield stress σ<sub>0.2</sub>, percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.50374012,51144009)the National Natural Science Foundation of Jiangxi Province(Grant No.0650047)+1 种基金the Science and Technology Program of the Education Department of Jiangxi Province(Grant No.GJJ09229)the Science Research Foundation of Jiangxi University of Science and Technology(Grant No.jxxjzd10003)
文摘To obtain the semi-solid slurry with uniform and fine structure morphology that satisfies the requirement of rheocasting process, a new process for preparing semi-solid AI alloy slurry was developed, in which local chilling was combined with low superheat pouring and slight electromagnetic stirring （LSPSEMS）. The morphology and the size of primary a-AI in the A356 alloy slurry prepared with the new process, i.e., LSPSEMS with local chilling, were investigated using MIAPS image analyzing software, and the grain refinement mechanism was discussed. The results indicate that the semi-solid primary phase consists of particle-like or globular-like a-AI, and the morphology and grain size of primary a-AI in the slurry can be markedly improved by the new process. The fine primary a-AI distributes uniformly in the slurry, which satisfies the requirement of rheocasting. Compared with the alloy prepared by LSPSEMS, the average equal-area-circle grain diameter of primary a-AI in semi-solid A356 alloy ingot prepared by the new process is decreased from 85.6μm to 68.8 μm at the central area, 112.6 μm to 77.6 μm at the transition area and is 84.7 μm in the edge area, respectively. The corresponding shape factor of primary a-AI is increased from 0.78 to 0.83, 0.54 to 0.77 and 0.28 to 0.59, respectively. In addition, the pouring temperature could be suitably raised from 620-630℃ of the traditional process to 650℃ using this technique, which is convenient for practical operation. The mechanism of grain refinement, in the new process, is that the local chilling quickens up the temperature decrease in the center of the melt. The nuclei could not grow up in a short time so the finer grains are formed in the melt.
基金the National Basic Research Program of China(973 Program)(2004CB217605)
文摘The coal hydrogenation reaction process is simply considered as three steps.In the first step,the smaller molecules associated with coal structure units are released as some gases and water in the condition of solvent and heating.In this step,some weaker bonds of the coal structure units are ruptured to form free radicals.The radicals are stabi- lized by hydrogen atoms from donor solvent and/or H2.In the second step,chain reaction occurs quickly.In the process of chain reaction,the covalent bonds of coal structure units are attacked by the radicals to form some asphaltenes.In the third step,asphaltenes are hydrogenated form more liquids and some gases.In coal liquefaction,the second step of coal hydrogenation reaction should be controlled to avoid integration of radicals,and the third step of coal hydrogenation should be accelerated to increase the coal conversion and the oil yield.A new concept of coal liquefaction process named as China direct coal lique- faction (CDCL) process is presented based on the mechanism study of coal liquefaction.
基金supported by General Program of National Natural Science Foundation of China (22178385)。
文摘In this work,a new process for achieving the recovery of elemental sulfur by utilizing a fluidized catalytic cracking(FCC) riser reactor for SOxtreatment(FCC-DeSOx) is proposed.The process leverages the high temperatures and hydrocarbon concentrations in the FCC riser reactor to convert SOxinto H_(2)S.Subsequently,H_(2)S,along with the cracked gas,is processed downstream to produce sulfur.Thermodynamic analysis of the key reduction reactions in the FCC-DeSOxprocess revealed that complete conversion of SOxto H_(2)S is feasible in the dry gas(hydrogen-rich) prelift zone,as well as the upper and lower zones of the riser,upon achieving thermodynamic equilibrium.Experimental studies were conducted to replicate the conditions of these reaction zones using a low concentration of hydrogen gas as the reducing agent.Through process optimization,investigation of the minimum reaction time,and kinetic studies,the potential of this method for the complete reduction of SOxwas further confirmed.
文摘A new synthesis method of difenoconazole is studied.Difenoconazole is prepared from m-dichlorobenzene by Friedel Crafts reaction,cyclization,bromination,nucleophilic substitution and etherification.The new process improves the selectivity of the reaction and simplified the pu-rification process.The total yield of this process is 84%,which provides a green and economical synthetic route for industrialization.
文摘Remote sensing has played a pivotal role in our understanding of the geometry of dykes and dyke swarms on Earth,Venus and Mars(West and Ernst,1991;Mege and Masson,1995;Ernst et al.,2005).Since the 1970’s
基金This work was supported by the Brain Korea 2lProject and the Grallt of Post-Doc Program, KyungpookNational University (1999).
文摘Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic FEM code has been developed. Isothermal forging process of a cylindrical housing has been simulated. The simulation results show that the given techniques and the FEM code are reasonable and feasible for three-dimensional bulk forming processes.
文摘The first International Conference on Modern Process Mineralogy and Mineral Processing, organized by the Nonferrous Metals Society of China and hosted by Beijing General Research Institute of Mining and Metallurgy,was held on September 22-25,1992,in Beijing,China.About 350 scholars and experts from 25 countries and regions showed up at the conference and 130 papers were presented,among them 98 papers are of mineral processing.Some of the papers given in mineral processing are summed up as follows.
文摘A new process of low-temperature methanol synthesis from CO/CO2/H2 based on dual-catalysis has been developed. Some alcohols, especially 2-alcohol, were found to have high catalytic promoting effect on the synthesis of methanol from CO hydrogenation. At 443 K and 5 MPa, the synthesis of methanol could process high effectively, resulting from the synergic catalysis of Cu/ZnO solid catalyst and 2-alcohol solvent catalyst. The primary results showed that when 2-butanol was used as reaction solvent, the one-pass average yield and the selectivity of methanol, in 40 h continuous reaction at temperature as low as 443 K and 5 MPa, were high up to 46.51% and 98.94% respectively. The catalytic activity was stable and the reaction temperature was 80 K or so lower than that in current industry synthesis process. This new process hopefully will become a practical method for methanol synthesis at low temperature.
文摘It is reported that the work of re-structuring the frame of China nationalstandards system for processing food has been finished with the print and distribution of 2004-2005Development Plan of National Standards for Food (hereinafter Plan). According to the demand of thePlan, there will be great changes among the current national standards and the professionalstandards for processing food, in which some standards will be integrated with others, somestandards will be cancelled, and some will be brought into the new standards system after the reviewof standards. The standards after being changed and the new national standards and the professionalstandards that need to be developed compose the new standards system for processing food.
文摘The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ<sub>b</sub>, yield stress σ<sub>0.2</sub>, percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.
