期刊文献+
共找到2,441篇文章
< 1 2 123 >
每页显示 20 50 100
A novel SVPWM strategy considering neutral-point potential balancing for three-level NPC inverter 被引量:2
1
作者 陈国呈 宋文祥 +1 位作者 武慧 孙承波 《Journal of Shanghai University(English Edition)》 CAS 2006年第1期53-58,共6页
This paper proposes a novel SVPWM (space vector pulse width modulation) strategy for the three-level neutral-point-clamped voltage source inverter, based on the particular disposition of all the redundant voltage ve... This paper proposes a novel SVPWM (space vector pulse width modulation) strategy for the three-level neutral-point-clamped voltage source inverter, based on the particular disposition of all the redundant voltage vectors. The new modulation approach shows superior performance for harmonic voltage and balancing control of neutral-point potential compared to the popular eight-stage centered SVPWM. It realizes suppression of inverter neutral-point potential variation by accurately modifying redundant factor of small vectors pairs, only requiring information of DC-link capacitor voltages and three-phase load currents. This is convenient to apply and is compatible of digital computer realization. Feasibility of the proposed control approach is verified by simulation and experimental results. 展开更多
关键词 neutral-point-clamped inverter neutral-point potential control SVPWM distribution factor.
在线阅读 下载PDF
Control Method of Three-level Neutral-point-clamped Inverter Based on Voltage Vector Diagram Partition 被引量:1
2
作者 宋文祥 姚钢 +1 位作者 陈陈 陈国呈 《Journal of Shanghai Jiaotong university(Science)》 EI 2008年第4期457-461,共5页
A new modulation approach was presented for the control of neutral-point (NP) voltage variation in the three-level NP-clamped voltage source inverter, and the average NP current model was established based on vector... A new modulation approach was presented for the control of neutral-point (NP) voltage variation in the three-level NP-clamped voltage source inverter, and the average NP current model was established based on vector diagram partition. Thus, theory base was built for balancing control of NP potential. Theoretical analysis and experimental results indicate that the proposed method for NP balancing control vector synthe- sizing concept based can make the average NP current zero, and do not influence NP potential within every sample period. The effectiveness of proposed research approach was verified by simulative and experimental results. 展开更多
关键词 three-level inverter variation mechanism of neutral-point potential balancing control method
原文传递
A neutral-point potential balance control strategy for three-level inverter based on VSVPWM 被引量:1
3
作者 CHENG Dong-liang WANG Xiao-peng +1 位作者 ZHU Tian-liang MA Wen-gang 《Journal of Measurement Science and Instrumentation》 CAS CSCD 2018年第4期397-404,共8页
The topology of diode neutral-point-clamped(NPC)three-level inverter is prone to neutral-point potential offset.When the sum of three-phase current is zero,the virtual space vector pulse width modulation(VSVPWM)scheme... The topology of diode neutral-point-clamped(NPC)three-level inverter is prone to neutral-point potential offset.When the sum of three-phase current is zero,the virtual space vector pulse width modulation(VSVPWM)scheme does not cause the neutral-point voltage offset,but it lacks the ability to balance the deviation.For this reason,a neutral-point potential control strategy combining virtual space vector modulation and loop width control is proposed.The neutral-point potential is balanced by introducing the distribution factor for the regions with redundant vectors.For other regions,the potential is controlled by selecting a suitable switching sequence.Meanwhile,the effect on the virtual vector modulation is reduced within the loop width by setting an appropriate loop width,thereby improving the balance effect.The simulation results show that the proposed method has a strong ability to control the offset and has excellent potential balance performance under the conditions of balanced load,unbalanced load and asymmetric capacitance parameters. 展开更多
关键词 three-level inverter virtual space vector pulse width modulation(VSVPWM) neutral-point potential balance switching sequence
在线阅读 下载PDF
A Modified Neutral-point Voltage Control Strategy for Three-level Inverters Based on Decomposition of Space Vector Diagram 被引量:1
4
作者 Dereje Woldegiorgis H.Alan Mantooth 《CES Transactions on Electrical Machines and Systems》 CSCD 2022年第2期124-134,共11页
Capacitor voltage imbalance is a significant problem for three-level inverters.Due to the mid-point modulation of these inverter topologies,the neutral point potential moves up or down depending on the neutral point c... Capacitor voltage imbalance is a significant problem for three-level inverters.Due to the mid-point modulation of these inverter topologies,the neutral point potential moves up or down depending on the neutral point current direction creating imbalanced voltages among the two capacitors.This imbalanced capacitor voltage causes imbalanced voltage stress among the semiconductor devices and causes increase output voltage and current harmonics.This paper introduces a modified voltage balancing strategy using two-level space vector modulation.By decomposing the three-level space vector diagram into two-level space vector diagram and redistributing the dwell times of the two-level zero space vectors,the modified voltage balancing method ensures minimal NP voltage ripple.Compared to the commonly used NP voltage control method(using 3L SVM[9]),the proposed modified NP voltage control method offers a slightly higher neutral-point voltage ripple and output voltage harmonics but,it has much lower switching loss,code size and execution time. 展开更多
关键词 Three-level inverter neutral-point voltage control Execution time
在线阅读 下载PDF
Comprehensive predictive control of neutral-point voltage balancing for back-to-back three-level NPC converters
5
作者 范必双 谭冠政 +1 位作者 樊绍胜 叶吉祥 《Journal of Central South University》 SCIE EI CAS 2014年第11期4210-4219,共10页
A comprehensive predictive strategy was proposed for the neutral-point balancing control of back-to-back three-level converters. The phase currents at both sides and the DC-link capacitor voltages were measured for th... A comprehensive predictive strategy was proposed for the neutral-point balancing control of back-to-back three-level converters. The phase currents at both sides and the DC-link capacitor voltages were measured for the prediction of the neutral-point current. A quality function was found to balance the neutral-point, and a metabolic on-times distribution factor was used as a predicator to minimize the quality function at each switching state. Simulation results show that the proposed method produces smaller ripples in tested signals compared with the established one, namely, 9.15% less in a total harmonic distortion(THD) of line-to-line voltage, 1.08% less in the THD of phase current, and 0.9 V less in the ripple of the neutral-point voltage. The obtained experimental results show that the main harmonics of the line-to-line voltage and the phase current in the proposed method are improved by 10 d B and 6 d B, respectively, and the ripple of neutral-point voltage is halved compared to the established one. 展开更多
关键词 back-to-back converter three-level converter neutral-point balancing comprehensive control predictive control
在线阅读 下载PDF
Parameter Plane Synthesis and Performance Investigation of a Three-Phase Neutral-Point Clamped Bidirectional Rectifier
6
作者 Nitin Langer Abdul Hamid Bhat Pramod Agarwal Tasadduq 《Journal of Energy and Power Engineering》 2012年第4期615-622,共8页
In this paper, parameter plane synthesis of a three-phase neutral-point clamped bidirectional rectifier has been performed. The converter involves one outer-loop PI voltage controller and two inner-loop PI current con... In this paper, parameter plane synthesis of a three-phase neutral-point clamped bidirectional rectifier has been performed. The converter involves one outer-loop PI voltage controller and two inner-loop PI current controllers for the closed-loop control. D-partition technique has been employed for the precise design of the voltage controller. The performance of the converter has been evaluated using MATLAB/Simulink software. An experimental prototype of converter has been developed and the experimental investigation of converter in closed-loop has been carried out. DSP DS 1104 of dSPACE has been used for real-time implementation of the designed controller. The performance of the converter has been found satisfactory using the designed controller parameters. 展开更多
关键词 ASDs (adjustable speed drives) HPFCs (high power factor converters) NPC neutral-point clamped) converter DSP real-time simulation.
在线阅读 下载PDF
Neutral-point voltage control for a three-level DC-AC inverter using equivalent-input-disturbance approach 被引量:2
7
《电力系统保护与控制》 EI CSCD 北大核心 2013年第1期183-189,共7页
在线阅读 下载PDF
Study on neutral-point voltage balancing control in three-level grid-connected photovoltaic inverter
8
作者 Jiajun Lin 《Advances in Engineering Innovation》 2025年第2期36-41,共6页
Three-level photovoltaic grid-connected inverters are widely used in the photovoltaic grid-connected systems because of their high efficiency and low harmonic characteristics.However,the major problem of the three-lev... Three-level photovoltaic grid-connected inverters are widely used in the photovoltaic grid-connected systems because of their high efficiency and low harmonic characteristics.However,the major problem of the three-level inverter has always been its core challenge,significantly affecting its system reliability and performance.This study reviews the causes of neutral-point voltage imbalance,discusses three typical three-level inverter topologies,including neutral-point-clamped inverter,flying capacitor inverter,and cascaded H-bridge inverter,and compares their application effectiveness in neutral-point voltage balancing control.Then,it analyzes several common control methods,such as the modulation method based on space vector,model predictive control,and relatively new techniques for controlling virtual neutral-point voltage.The comparative analysis results show that space vector is easy to implement,but the neutral-point voltage fluctuates markedly;model predictive control exhibits strong dynamic response performance but has a high computational complexity;virtual neutral-point voltage does not rely on the real-time feedback of actual neutral-point voltage.In conclusion,this study makes a prospect for the development trends of neutralpoint voltage balance control technologies and proposes possible development directions for further improving the performance of grid-connected photovoltaic inverters. 展开更多
关键词 three-level grid-connected photovoltaic inverter neutral-point voltage balancing control method
在线阅读 下载PDF
悬浮电容自平衡五电平逆变器模型预测并网控制策略
9
作者 李萍 陈硕 +2 位作者 赵峰 李林 刘国忠 《科学技术与工程》 北大核心 2026年第5期1982-1993,共12页
针对多电平逆变器利用传统有限集模型预测(finite control set-model predictive control, FCS-MPC)并网控制存在多目标难以权衡、调制效率低,以致影响并网系统性能的问题,提出一种悬浮电容电压自平衡五电平有源中点钳位(active neutral... 针对多电平逆变器利用传统有限集模型预测(finite control set-model predictive control, FCS-MPC)并网控制存在多目标难以权衡、调制效率低,以致影响并网系统性能的问题,提出一种悬浮电容电压自平衡五电平有源中点钳位(active neutral-point clamped, ANPC)逆变器拓扑及改进的FCS-MPC控制策略。该策略通过对逆变器所有电压矢量进行预处理、分类、筛选,构建出满足不同目标的矢量池,实施控制周期内较少矢量的滚动寻优;各目标代价函数归一化处理分配各优化矢量作用时间,形成矢量序列输出,以同时满足系统多项性能需求,无需考虑目标函数间权重系数分配;所提逆变器电路拓扑具有悬浮电容电压自平衡工作模态,进一步简化了FCS-MPC算法实现。实验结果表明,改进的FCS-MPC算法能够有效实现新型五电平ANPC逆变器的并网电流跟踪控制,且母线中点电位和悬浮电容电压的平衡度较高。所提方法具有可行性和有效性,为多电平变换器模型预测提供了新的解决方案。 展开更多
关键词 五电平有源中点钳位逆变器 有限集模型预测 矢量预处理 中点电位平衡 悬浮电容电压自平衡
在线阅读 下载PDF
基于代数调制的中点钳位型三电平变换器共模电压抑制策略
10
作者 熊文静 朱欣 +3 位作者 林建亨 粟梅 李鼎文 张明 《电源学报》 北大核心 2026年第1期79-90,共12页
功率变换器采用脉宽调制时产生的高共模电压CMV(common-mode voltage)会使电机轴电压过高,进而导致高频高幅值轴电流破坏电机绝缘、增加电磁干扰等。为减小中点钳位型NPC(neutral point clamped)三电平变换器的共模电压,提出了基于代数... 功率变换器采用脉宽调制时产生的高共模电压CMV(common-mode voltage)会使电机轴电压过高,进而导致高频高幅值轴电流破坏电机绝缘、增加电磁干扰等。为减小中点钳位型NPC(neutral point clamped)三电平变换器的共模电压,提出了基于代数调制框架的共模电压抑制策略:首先,将占空比的确定问题转化为非齐次线性方程组的求解问题;然后,合理地选择调制自由度以实现中点电压NPV(neutral point voltage)平衡控制的目标;其次,根据占空比约束,选择偏置量获取最终占空比;最后,使中间相开关采用反相载波得到新的开关状态组合,实现降低共模电压的目的。所提调制策略无需额外的控制器,实现简单,在保证中点钳位型三电平变换器的中点电压具有良好平衡特性的前提下,可将共模电压降低至直流侧电压的1/6范围内。实验结果验证了所提调制策略的有效性和可行性。 展开更多
关键词 中点钳位型三电平变换器 代数调制 共模电压 中点电压平衡
在线阅读 下载PDF
三相四线制逆变器独立中线模块的高带宽复合控制策略与参数优化设计方法
11
作者 赵景涛 雷家兴 +2 位作者 郑舒 吴志 陈永华 《中国电机工程学报》 北大核心 2026年第3期1165-1177,I0025,共14页
带独立中线模块的三相四线制逆变器具有零序电流小、输出中点电压与三相电压控制解耦等优势,其正常运行的基础是中点电压稳定。传统的比例-积分(proportional integral,PI)双环控制策略受制于其有限带宽,对中点电压波动的抑制效果不足,... 带独立中线模块的三相四线制逆变器具有零序电流小、输出中点电压与三相电压控制解耦等优势,其正常运行的基础是中点电压稳定。传统的比例-积分(proportional integral,PI)双环控制策略受制于其有限带宽,对中点电压波动的抑制效果不足,易引起输出共模扰动、降低波形质量。为此,提出一种内环状态反馈和外环PI复合的中点电压控制策略及基于目标响应驱动的控制参数优化设计方法。所提策略在离散域建立受控对象的精细化数学模型,基于系统整体设计理念,通过预设目标传递函数逆向获得所有控制参数的解析表达式,并分析系统可实现控制带宽与闭环零极点位置之间的量化关系;在此基础上,研究不同控制带宽下系统对零序电流低频分量的抑制效果及采样延时和噪声对控制性能的影响规律,为实际应用中控制参数的最优设计提供指导;同时,分析滤波参数宽幅变化对系统闭环控制性能的影响。实验结果表明,所提方法可在不放大噪声的同时显著提高控制带宽,进而有效抑制不对称/谐波负载扰动下的中点电压波动、提高输出波形质量,且具有较高的参数鲁棒性。 展开更多
关键词 独立中线模块 中点电压波动 状态反馈控制 高带宽
原文传递
基于冗余全控器件功能复用的容错型三电平混合有源中点钳位型变换器及其运行方法
12
作者 彭星 肖凡 +2 位作者 蒋毅 涂春鸣 郭祺 《电工技术学报》 北大核心 2026年第4期1340-1351,共12页
三电平混合有源中点钳位型(3L-HANPC)变换器凭借高效率、高功率密度及成本适中等优势,成为能源变换系统中最受青睐的能源转换接口设备。然而,变换器作为系统薄弱环节,其运行可靠性往往受到开关故障制约。目前,对于三电平变换器而言,最... 三电平混合有源中点钳位型(3L-HANPC)变换器凭借高效率、高功率密度及成本适中等优势,成为能源变换系统中最受青睐的能源转换接口设备。然而,变换器作为系统薄弱环节,其运行可靠性往往受到开关故障制约。目前,对于三电平变换器而言,最具性价比的开关级容错方案是配置共享冗余单元,但其仅面向T型变换器结构且正常态时处于静默状态。因此,为解决共享冗余单元在3L-HANPC变换器应用中适用性与利用率差的问题,该文提出基于冗余全控器件功能复用的容错型3L-HANPC变换器拓扑及其运行方法。正常态时,冗余全控器件可工作于纹波抑制模式,实现变换器高调制度、低功率因数工况下直流分裂电容电压纹波的抑制;故障态时,冗余全控器件工作于故障桥臂共享模式,实现跨相位多桥臂故障开关的容错管控。该文详细阐述了容错型3L-HANPC拓扑结构、工作原理与控制策略。实验结果验证了所提拓扑结构与运行方法的正确性与有效性。 展开更多
关键词 开关故障 容错型3L-HANPC变换器 冗余全控器件 功能复用 运行方法
在线阅读 下载PDF
基于平移调制波的三电平有源中点钳位逆变器容错下中点电位平衡策略
13
作者 赵相霖 李卫超 周亮 《电工技术学报》 北大核心 2026年第4期1352-1368,共17页
在极端工况下,三电平有源中点钳位(ANPC)逆变器可能出现开路故障,此时小矢量的冗余状态被打破,传统调整冗余小矢量作用时间的均压方法将失效,即使在容错运行下,仍然存在中点(NP)电位不均衡问题。为解决该问题,首先,分析将故障相桥臂钳... 在极端工况下,三电平有源中点钳位(ANPC)逆变器可能出现开路故障,此时小矢量的冗余状态被打破,传统调整冗余小矢量作用时间的均压方法将失效,即使在容错运行下,仍然存在中点(NP)电位不均衡问题。为解决该问题,首先,分析将故障相桥臂钳位到零电平的拓扑工作原理,在此基础上,推导容错下叠加零序分量的三相调制波,从而简化矢量作用时间的计算过程;其次,进一步分析容错下小矢量作用时间的变化对NP电流的影响,根据平移调制波与改变小矢量作用时间的对应关系,提出一种基于平移调制波的电压平衡(VBBTM)策略;接着,采用电荷平衡法,定量计算调制波的平移量;最后,深入分析VBBTM策略对中点电位波动幅值、电流不平衡度以及目标电压矢量的影响,并通过仿真和实验验证了所提策略在三电平ANPC逆变器不同相器件故障、同相不同位置器件故障以及不同调制比条件下的有效性。 展开更多
关键词 有源中点钳位逆变器 开路故障 容错控制 平移调制波 中点电位平衡
在线阅读 下载PDF
大功率三电平ANPC牵引逆变器改进同步SVPWM策略
14
作者 赵牧天 葛琼璇 +3 位作者 朱进权 王珂 张波 赵鲁 《中国电机工程学报》 北大核心 2026年第1期357-375,I0027,共20页
在大功率牵引逆变器的低载波比(carrier ratio,Cr)工况中,为优化输出电压谐波性能,可采用同步空间矢量脉宽调制(space vector pulse width modulation,SVPWM)。该文以600 km/h高速磁浮三电平有源中点钳位逆变器为研究对象,在3的整数倍Cr... 在大功率牵引逆变器的低载波比(carrier ratio,Cr)工况中,为优化输出电压谐波性能,可采用同步空间矢量脉宽调制(space vector pulse width modulation,SVPWM)。该文以600 km/h高速磁浮三电平有源中点钳位逆变器为研究对象,在3的整数倍Cr下,为实现同步性、相电压对称性并避免两电平跳变,提出4种扇区划分方式和4种采样点设置方式,并给出基于多采样率控制系统的特定角度处脉宽调制采样方法。据此,可实现任意相电压半周期脉冲数的同步SVPWM,并可过渡到单脉冲过调制区。为分析所提策略的谐波特性,利用二重傅里叶变换,提出三电平逆变器在SVPWM下的相电压频谱解析方法;根据所提同步SVPWM,对不同Cr下调制算法之间切换时载波变化和开关序列执行情况进行分析,进而提出宽频率范围同步SVPWM切换策略;通过实验验证所提同步SVPWM策略可满足相电压三相对称、半波对称以及1/4周期对称,两调制策略之间可实现无相电压两电平跳变和电流明显波动的平滑切换。 展开更多
关键词 大功率 三电平有源中点钳位逆变器 低载波比 同步空间矢量脉宽调制 频谱解析 平滑切换
原文传递
双馈三电平变流器低频控制优化策略研究
15
作者 朱志权 王瑜 孙耀杰 《电机与控制应用》 2026年第2期110-116,共7页
【目的】针对大功率双馈风电变流器三电平拓扑在低频工况下因半周期调制引发的功率器件结温波动与寿命衰减问题,本文提出了一种基于运行状态感知与性能优化的三电平有源中性点钳位(ANPC)/中性点钳位(NPC)切换运行控制方法。【方法】采... 【目的】针对大功率双馈风电变流器三电平拓扑在低频工况下因半周期调制引发的功率器件结温波动与寿命衰减问题,本文提出了一种基于运行状态感知与性能优化的三电平有源中性点钳位(ANPC)/中性点钳位(NPC)切换运行控制方法。【方法】采用频率自适应的动态拓扑切换技术,高频段启用ANPC拓扑以降低开关损耗,低频段切换至NPC拓扑抑制二极管导通损耗,结合高精度仿真与实物平台验证。【结果】试验结果表明,所提控制方法在双馈三电平变流器运行过程中表现出显著优势,尤其在二极管结温波动抑制方面效果突出。根据转子频率动态匹配最优拓扑结构,变流器功率器件的损耗分布更趋合理,二极管结温在宽频率范围内的波动幅度得到有效降低。【结论】所提方法兼顾了系统控制性能与器件可靠性,为双馈三电平变流器低频控制策略设计提供了新的适用性方法。 展开更多
关键词 三电平拓扑 有源中性点钳位 中性点钳位 结温波动
在线阅读 下载PDF
增强接地感知的预调式消弧线圈阻尼电阻优化方法
16
作者 张建宾 王俊诚 +2 位作者 董轩 李景丽 张会杰 《郑州大学学报(工学版)》 北大核心 2026年第2期113-121,共9页
阻尼电阻作为预调式消弧线圈的关键组件,现有设定方法偏重抑制串联谐振过电压和防止正常运行保护误动,导致高阻接地故障时中性点位移电压不易越过告警阈值,致使选线装置无法投入。为提升谐振接地系统的高阻接地感知灵敏度,首先,定量分... 阻尼电阻作为预调式消弧线圈的关键组件,现有设定方法偏重抑制串联谐振过电压和防止正常运行保护误动,导致高阻接地故障时中性点位移电压不易越过告警阈值,致使选线装置无法投入。为提升谐振接地系统的高阻接地感知灵敏度,首先,定量分析系统正常运行特性与高阻接地故障特征,以正常运行中性点位移电压不越限和高阻接地时其可靠告警为边界条件,推导串、并联阻尼电阻临界值的计算公式;其次,系统分析脱谐度、过渡电阻、系统不平衡度、电容电流等参数对临界值的影响,提出阻尼电阻的选取原则与方法;最后,针对某典型谐振接地系统高阻接地感知能力不足的问题,采用所提优化方法,将原15Ω串联阻尼电阻调整为串联5.05Ω或并联346.37Ω电阻,优化后的阻尼电阻在有效抑制串联谐振过电压的同时,确保高阻接地故障时位移电压可靠越限,将系统耐过渡电阻能力提升至2.78 kΩ,且并联阻尼方式效果更优。该方法仅需利用消弧线圈常规在线监测数据即可实现,无须额外检测设备,具有较强的可行性与经济性。 展开更多
关键词 谐振接地系统 预调式消弧线圈 阻尼电阻 高阻接地故障 中性点位移电压
在线阅读 下载PDF
浅析偏磁式消弧线圈在中压电力系统中的应用
17
作者 邵梦宇 杨帛润 《防爆电机》 2026年第1期80-84,共5页
从偏磁式消弧线圈原理出发,深入研究阻尼率、脱谐度这两个系统接地情况下影响系统安全平稳运行的关键指标,得出脱谐度降低是导致中性点位移电压升高的重要因素这一结论。结合消弧线圈在我公司的应用情况,尤其是与新技术-直流解耦柜的配... 从偏磁式消弧线圈原理出发,深入研究阻尼率、脱谐度这两个系统接地情况下影响系统安全平稳运行的关键指标,得出脱谐度降低是导致中性点位移电压升高的重要因素这一结论。结合消弧线圈在我公司的应用情况,尤其是与新技术-直流解耦柜的配合使用方面,提出了问题并给出了解决方法。 展开更多
关键词 消弧线圈 偏磁 电容电流 中性点位移电压
在线阅读 下载PDF
一种基于虚拟中性点的高精度单相三线负载侧电压检测方法
18
作者 张祥甫 《现代工程科技》 2026年第1期101-104,共4页
随着电力系统的发展,电压监测在电路保护和设备管理中发挥着越来越重要的作用。在有中性线的应用中,当电源控制开关拉闸后可通过检测负载侧对中性线的电压来判断是否拉闸成功,但在菲律宾、美国的电网中,存在单相三线2S表型,由于中性线(N... 随着电力系统的发展,电压监测在电路保护和设备管理中发挥着越来越重要的作用。在有中性线的应用中,当电源控制开关拉闸后可通过检测负载侧对中性线的电压来判断是否拉闸成功,但在菲律宾、美国的电网中,存在单相三线2S表型,由于中性线(N线)不经过电表,传统的以中心线为参考的负载侧电压监测方式无法直接应用。针对此问题,设计并实现了一个基于虚拟中性点的负载侧电压检测系统。从理论层面对设置虚拟中性点进行可行性分析,通过硬件采样电路、信号调理电路、计量采样电路,得到实际负载侧电压,并通过仿真和试验,证明了负载电压的误差精度控制在±1%,实现了对负载的精准检测。 展开更多
关键词 单相三线 2S电表 SCS电源控制开关 虚拟中性点 负载电压检测
在线阅读 下载PDF
发电厂10 kV系统中性点接地方式选择及故障处理技术
19
作者 张慧康 徐华丽 +1 位作者 汤森垲 王明 《电力系统装备》 2026年第2期98-100,共3页
10 kV系统的运行稳定性影响着发电机组安全输出和电网供电可靠性。中性点接地方式是10 kV系统设计的关键环节,决定着系统在故障工况下的电流分布、保护动作特性、设备耐受能力。文章分析不同中性点接地方式的技术特点和适用场景,重点研... 10 kV系统的运行稳定性影响着发电机组安全输出和电网供电可靠性。中性点接地方式是10 kV系统设计的关键环节,决定着系统在故障工况下的电流分布、保护动作特性、设备耐受能力。文章分析不同中性点接地方式的技术特点和适用场景,重点研究接地方式选择对故障响应的影响,并提出具体的故障处理技术措施,为发电厂10 kV系统的优化设计及安全维护提供依据。 展开更多
关键词 发电厂10kV系统 中性点接地方式 单相接地故障 故障处理 保护定值
在线阅读 下载PDF
基于矢量分类的NPC型三电平双三相PMSM的改进模型预测电压控制 被引量:4
20
作者 袁庆庆 步凡 +1 位作者 谢晓彤 夏鲲 《中国电机工程学报》 北大核心 2025年第2期758-768,I0030,共12页
多电平多相电机驱动系统存在电压矢量数目多、冗余复杂及多目标非线性约束等问题。以二极管钳位型三电平六相逆变器驱动双三相永磁同步电机为研究对象,以电机谐波电流抑制和逆变器直流侧中点电位平衡控制为目标,提出一种基于电压矢量三... 多电平多相电机驱动系统存在电压矢量数目多、冗余复杂及多目标非线性约束等问题。以二极管钳位型三电平六相逆变器驱动双三相永磁同步电机为研究对象,以电机谐波电流抑制和逆变器直流侧中点电位平衡控制为目标,提出一种基于电压矢量三角区域分类的改进模型预测电压控制策略。首先,以基波子平面大投影幅值为原则,对729个电压矢量进行初筛;接着,基于三角区域分类方法对筛选后的电压矢量进行分类,并对期望电压进行所属三角区域定位、确定候选矢量。设计满足电机定子电流谐波抑制及逆变器中点电位平衡控制的目标函数;根据电机数学模型和逆变器特征研究多目标控制权重因子的理论设计方法。不同工况下的有效性及对比实验表明,所研究的控制策略不仅能改善多电平多相电机驱动系统的多目标控制性能,还能有效降低控制器计算负担。 展开更多
关键词 二极管钳位型三电平六相逆变器 双三相永磁同步电机 矢量分类 谐波电流 中点电位 模型预测电压控制 权重因子
原文传递
上一页 1 2 123 下一页 到第
使用帮助 返回顶部